Excitation Of Modes Research Articles

Anisotropic growth of Au-Ag heteronanostructures through plasmon-induced reduction.

Plasmonic heteronanostructures are promising building blocks for photofunctional materials and devices including photocatalysts, optical materials, and optoelectronic devices. In the present work, we fabricated Au-Ag bimetallic heteronanostructures based on site-selective and anisotropic Ag deposition and growth on Au nanocubes. Plasmonic Au nanocubes were adsorbed onto a glass plate, and the distal mode or proximal-distal mode of the nanocubes was selectively excited in the presence of Ag+ and citrate ions. Polycrystalline Ag was deposited around the top of the Au nanocubes by the distal mode excitation, and single crystalline Ag was grown laterally from the Au nanocubes by the proximal-distal mode excitation. The present method would be applied to the fabrication of various plasmonic nanostructures composed of two or more heterodomains.

Effects and Modification Mechanisms of Different Plasma Treatments on the Surface Wettability of Different Woods

Plasma treatment of wood surfaces has shown significant effects, but different excitation methods used for different species of wood generally result in varied characteristics of wood surfaces. Secondly, plasma modification greatly enhances the absorption of liquids by wood, but the relationship between liquid absorption and surface wettability is rarely studied. Limited detailed investigation of the modification effects and mechanisms has hindered the large-scale applications of plasma treatment in the wood industry. In this study, two typical plasmas, radio frequency (RF) plasma and gliding arc discharge (GAD) plasma, were employed to treat three species of wood: poplar, black walnut, and sapele. By focusing on changes in the contact angle of the wood surface, an exponential equation fitting method is used to determine the measurement time for contact angles. The research identified that factors contributing to the decrease in contact angle after plasma modification include not only the increase in surface energy but also liquid absorption. SEM and XPS analyses demonstrate that plasma etching accelerated liquid absorption by modifying the surface topography, while the increase in surface energy was due to the addition of oxygen-containing groups. High-valence C=O and O-C=O groups serve as indicators of plasma-induced surface chemical reactions. RF modification primarily features surface etching, whereas GAD significantly increases the active surface groups. Thus, different plasmas, due to their distinct excitation modes, produce diverse modification effects on wood. Considering the various physical and chemical properties of plasma-modified wood surfaces, recommendations for adhesive use on plasma-modified wood are provided.

Dominant higher-order vortex gyromodes in circular magnetic nanodots.

The transition to the third dimension enables the creation of spintronic nanodevices with significantly enhanced functionality compared to traditional 2D magnetic applications. In this study, we extend common two-dimensional magnetic vortex configurations, which are known for their efficient dynamical response to external stimuli without a bias magnetic field, into the third dimension. This extension results in a substantial increase in vortex frequency, reaching up to 5 GHz, compared to the typical sub-GHz range observed in planar vortex oscillators. A systematic study reveals a complex pattern of vortex excitation modes, explaining the decrease in the lowest gyrotropic mode frequency, the inversion of vortex mode intensities, and the nontrivial spatial distribution of vortex dynamical magnetization noted in previous research. These phenomena enable the optimization of both oscillation frequency and frequency reproducibility, minimizing the impact of uncontrolled size variations in those magnetic nanodevices.

Mode division multiplexing reconstructive spectrometer with an all-fiber photonics lantern

This study presents a high-accuracy, all-fiber mode division multiplexing (MDM) reconstructive spectrometer (RS). The MDM was achieved by utilizing a custom-designed 3 × 1 mode-selective photonics lantern to launch distinct spatial modes into the multimode fiber (MMF). This facilitated the information transmission by increasing light scattering processes, thereby encoding the optical spectra more comprehensively into speckle patterns. Spectral resolution of 2 pm and the recovery of 2000 spectral channels were accomplished. Compared to methods employing single-mode excitation and two-mode excitation, the three-mode excitation method reduced the recovered error by 88% and 50% respectively. A resolution enhancement approach based on alternating mode modulation was proposed, reaching the MMF limit for the 3 dB bandwidth of the spectral correlation function. The proof-of-concept study can be further extended to encompass diverse programmable mode excitations. It is not only succinct and highly efficient but also well-suited for a variety of high-accuracy, high-resolution spectral measurement scenarios.Graphical

Voltage control of multiferroic magnon torque for reconfigurable logic-in-memory

Magnons, bosonic quasiparticles carrying angular momentum, can flow through insulators for information transmission with minimal power dissipation. However, it remains challenging to develop a magnon-based logic due to the lack of efficient electrical manipulation of magnon transport. Here we show the electric excitation and control of multiferroic magnon modes in a spin-source/multiferroic/ferromagnet structure. We demonstrate that the ferroelectric polarization can electrically modulate the magnon-mediated spin-orbit torque by controlling the non-collinear antiferromagnetic structure in multiferroic bismuth ferrite thin films with coupled antiferromagnetic and ferroelectric orders. In this multiferroic magnon torque device, magnon information is encoded to ferromagnetic bits by the magnon-mediated spin torque. By manipulating the two coupled non-volatile state variables—ferroelectric polarization and magnetization—we further present reconfigurable logic operations in a single device. Our findings highlight the potential of multiferroics for controlling magnon information transport and offer a pathway towards room-temperature voltage-controlled, low-power, scalable magnonics for in-memory computing.

An Ultra-Thin Multi-Band Logo Antenna for Internet of Vehicles Applications

In this paper, an ultra-thin logo antenna (LGA) operating in multiple frequency bands for Internet of Vehicles (IoVs) applications was proposed. The designed antenna can cover five frequency bands, 0.86–1.01 GHz (16.0%) for LoRa communication, 1.3–1.36 GHz (4.6%) for GPS, 2.32–2.71 GHz (16.3%) for Bluetooth communication, 3.63–3.89 GHz (6.9%) for 5G communication, and 5.27–5.66 GHz (7.1%) for WLAN, as the simulation indicated. The initial antenna started with a modified coplanar waveguide (CPW)-fed circular disk monopole radiator. To create extra current paths and further excite other modes, the disk was hollowed out into the shape of the car logo of the Chinese smart EV brand XPENG composing four rhombic parasitic patches. Next, four triangular parasitic patches were inserted to improve the impedance matching of the band at 5.6 GHz. Finally, four metallic vias were loaded for adjusting resonant points and the return loss reduction. Designed on a flexible substrate, the antenna can easily bend to a certain degree in complex vehicular communication for IoV. The measured results under horizontal and vertical bending showed the LGA can operate in a bending state while maintaining good performance. The proposed LGA addresses the issue of applying one single multi-band antenna to allow vehicles to communicate over several channels, which relieves the need for a sophisticated antenna network.

Investigation of electromagnetic fluctuations in a magnetically screened high beta plasma

Abstract We report low-frequency electromagnetic turbulence in the large-volume plasma device in a region that is receiving magnetically screened plasma. The magnetic screen is produced by activating a large solenoid that generates a strong magnetic field (B_EEF) transverse to the background axial magnetic field (B_z). The magnetic field strength variation inB_EEF controls the plasma diffusion and is responsible for parametric profile modifications in LVPD. The turbulence is characterised by the observed features of an electromagnetic (EMHD) mode having frequency ordering in the lower hybrid range (f_ci < f <f_LH). The free energy source for the excited turbulence is believed to be the prevalent finite radial pressure gradient in the system. The excited electromagnetic mode shows typical scales for the wave number, k_⊥ ~ 0.13 cm-1 and frequency f ~ 6 kHz and propagates with a phase velocity comparable to ion acoustic velocity, Cs in electron diamagnetic drift direction. It is believed that the low-frequency pressure gradient-driven electromagnetic mode exhibits coupling with the lower hybrid or whistler wave.

Excitation of the Secondary Modes by the Broad Spectrum Sound in a Liquid with Relaxation Losses

Features of nonlinear phenomena and, in particular, acoustic excitation of the entropy and relaxation modes in a liquid electrolyte with a chemical reaction are examined. The total range of frequencies of an exciter is considered, and the instantaneous dynamic equations are derived which govern perturbations in the secondary modes. The instantaneous leading-order acoustic forces of the secondary modes are evaluated. Examples of harmonic and nearly harmonic acoustic exciter are considered in detail. The difference in the nonlinear acoustic phenomena in an electrolyte and gases with relaxation mechanisms are specified and discussed.

Acoustic phonon excitation in gold probed by time-resolved photoemission electron microscopy.

Electron-phonon coupling is an important energy transfer mechanism in solids after ultrafast laser excitation. In this study, we present an extreme ultraviolet (EUV) and infrared (IR) pump-probe photoemission experiment to investigate the electron-phonon coupling in nonequilibrium gold. The energy of IR-laser-emitted photoelectrons is shifted due to the EUV photoemission and oscillates with a ∼4THz frequency. Such oscillation is considered as the effective excitation of the longitudinal acoustic phonon mode in gold through the spectral-dependent electron-phonon coupling. Our study showcases the capability of time-resolved photoemission electron microscopy to monitor the non-equilibrium lattice vibrations with ultrahigh spatial and temporal resolution.

Cooling Condition Effect on Spectral Properties and Smartphone-Based Anticounterfeiting Application of Zn3Ga2Ge2O10/Cr3+ Phosphors.

The influence of cooling history for the Zn3Ga2Ge2O10/Cr3+ phosphors prepared by solid state reaction on the spectral properties was discovered, and an anticounterfeiting scheme based on the identification with smartphone was proposed and experimentally demonstrated using the studied phosphors. A combination of color-tunable visible fluorescence emission and near-infrared (NIR) afterglow emission in Zn3Ga2Ge2O10/x mol % Cr3+(x = 0, 0.05, 1, 2, 3, and 4) phosphors to achieve multimode anticounterfeiting was reported. It is found that with the increasing Cr3+ concentrations, the visible emission can be tuned from green, light pink, and light red to deep red under 254 nm ultraviolet (UV) excitation. This phenomenon is related to the formation of oxygen vacancies in the host during the process of natural cooling and the characteristic emission of Cr3+. In addition, the persistent time of the Cr3+ emission centered at 700 nm can be also tuned by various Cr3+ concentrations. A possible mechanism was deduced to explain the afterglow phenomenon. Lastly, a flower pattern applied in anticounterfeiting was fabricated using the Zn3Ga2Ge2O10/x mol % Cr3+ (x = 0, 0.05, 1, 2, 3, and 4) phosphors to present tunable color and NIR afterglow signals at different excitation modes, and the camera of smartphone was chosen as a detection tool to take the NIR images. The results obtained above suggest that the prepared phosphors at natural cooling condition have great potential in affording advanced optical anticounterfeiting.

Acoustic phonon excitation in gold probed by time-resolved photoemission electron microscopy.

Electron-phonon coupling is an important energy transfer mechanism in solids after ultrafast laser excitation. In this study, we present an extreme ultraviolet (EUV) and infrared (IR) pump-probe photoemission experiment to investigate the electron-phonon coupling in nonequilibrium gold. The energy of IR-laser-emitted photoelectrons is shifted due to the EUV photoemission and oscillates with a ∼4THz frequency. Such oscillation is considered as the effective excitation of the longitudinal acoustic phonon mode in gold through the spectral-dependent electron-phonon coupling. Our study showcases the capability of time-resolved photoemission electron microscopy to monitor the non-equilibrium lattice vibrations with ultrahigh spatial and temporal resolution.

Dual band high tuning range frequency reconfigurable dielectric resonator antenna for sub-6 GHz applications

ABSTRACT A high-tuning range frequency reconfigurable dual-band compact cylindrical Dielectric Resonator Antenna (DRA) for 5 G Sub 6 GHz applications is presented in the proposed work. The work presented here provides compactness, frequency reconfigurability (FR), and dual-band. FR is obtained through two PIN diode switches, which operate in ON-ON, ON-OFF, OFF-ON, and OFF-OFF configurations and offer a maximum wide tuning range and a total spectrum of 44.44% and 71.49%, respectively. In the cylindrical DRA, the HE M 11 δ and HE M 12 δ modes create dual-band, while the hybrid structure and higher order mode excitation yield compactness.

Dual band high tuning range frequency reconfigurable dielectric resonator antenna for sub-6 GHz applications

ABSTRACT A high-tuning range frequency reconfigurable dual-band compact cylindrical Dielectric Resonator Antenna (DRA) for 5 G Sub 6 GHz applications is presented in the proposed work. The work presented here provides compactness, frequency reconfigurability (FR), and dual-band. FR is obtained through two PIN diode switches, which operate in ON-ON, ON-OFF, OFF-ON, and OFF-OFF configurations and offer a maximum wide tuning range and a total spectrum of 44.44% and 71.49%, respectively. In the cylindrical DRA, the HE M 11 δ and HE M 12 δ modes create dual-band, while the hybrid structure and higher order mode excitation yield compactness.

Multipole modes of excitation in tetrahedrally deformed neutron-rich Zr isotopes

Multipole modes of excitation in tetrahedrally deformed neutron-rich Zr isotopes

Multipole modes of excitation in tetrahedrally deformed neutron-rich Zr isotopes

Multipole modes of excitation in tetrahedrally deformed neutron-rich Zr isotopes

A data-driven approach for rapid detection of aeroelastic modes from flutter flight test based on limited sensor measurements

Flutter flight test involves the evaluation of the airframe’s aeroelastic stability by applying artificial excitation on the aircraft lifting surfaces. The subsequent responses are captured and analyzed to extract the frequencies and damping characteristics of the system. However, noise contamination, turbulence, non-optimal excitation of modes, and sensor malfunction in one or more sensors make it time-consuming and corrupt the extraction process. In order to expedite the process of identifying and analyzing aeroelastic modes, this study implements a time-delay embedded Dynamic Mode Decomposition technique. This approach is complemented by Robust Principal Component Analysis methodology, and a sparsity promoting criterion which enables the automatic and optimal selection of sparse modes. The anonymized flutter flight test data, provided by the fifth author of this research paper, is utilized in this implementation. The methodology assumes no knowledge of the input excitation, only deals with the responses captured by accelerometer channels, and rapidly identifies the aeroelastic modes. By incorporating a compressed sensing algorithm, the methodology gains the ability to identify aeroelastic modes, even when the number of available sensors is limited. This augmentation greatly enhances the methodology’s robustness and effectiveness, making it an excellent choice for real-time implementation during flutter test campaigns.

Vibration source analysis and structural optimization design of rotary table based on OTPA.

Due to the influence of coal rock shape, hardness, working environment and other factors in the cutting process of cantilever roadheader, the cutting head will produce irregular and violent vibration. As the rotary table of key stress components, its operation process stability, dynamic reliability and life affect the cutting efficiency and cutting stability of cantilever roadheader. In order to study the vibration characteristics of the rotary table in the cutting process, firstly, based on the theory of spatial force analysis and calculation, the spatial mechanical model of the rotary table of the cantilever roadheader is established. By solving the balance equation of the rotary table force system, the variation law of the load at the hinge ear of the rotary table with the cutting pitch angle and the horizontal angle is obtained. Secondly, based on the path transfer analysis method of working condition, the vibration data of cutting head, cutting cantilever, cutting lifting and rotary hydraulic cylinder under stable cutting condition are taken as input signals. By constructing the transfer path analysis model of rotary table working condition, the synthetic vibration of rotary table in cutting process is simulated, and the main vibration source of rotary table is determined. Then, the vibration contribution and contribution degree of each vibration excitation point to the hinge ear of rotary table are studied. By building a cutting test bench, the vibration response of rotary table in cutting process is tested to verify the correctness of the theoretical model.Thirdly, based on the frequency domain analysis method of random vibration fatigue life, combined with the S-N curve of the rotary table, the PSD curve at the maximum stress of the rotary table is obtained by modal excitation method, and the load data is imported into ANSYS nCode software to obtain the life cloud diagram and damage cloud diagram of the rotary table, and then the fatigue life of the rotary table under symmetrical cyclic load is solved. Finally, based on the response surface optimization analysis method, the maximum stress and maximum deformation of the rotary table are taken as the optimization objectives, and the aperture of each hinge ear of the rotary table is taken as the optimization variable. Based on Design Expert, a second-order regression model is established to realize the multi-objective optimization design of the key stress parts of the rotary table in the cutting process. The simulation results show that under the same cutting conditions, the maximum stress of the optimized rotary table is reduced by 15.82% year-on-year, and the maximum deformation is reduced by 24.70% year-on-year. The optimized rotary table structure can better adapt to the cutting process, which is beneficial to improve the service life of the rotary table and enhance its operation stability. The research results are beneficial to enrich the relevant research theory in the field of rotary table vibration of cantilever roadheader, and are beneficial to improve the service life of the rotary table and the efficiency of tunneling and mining.

Optimizing guided wave propagation for sensitive axial stress measurement in steel pipes

Steel pipe structures are commonly used in the industrial field. Stress-induced structural failures can have a significant impact on equipment safety. Therefore, effective stress monitoring is a crucial area of research. Constrained by the multi-frequency and multi-modal characteristics of ultrasonic guided waves, the limitations of traditional stress measurement methods based on these waves lie in the lack of a systematic analysis of the impact of multi-modal fused signals on stress measurement. To explore the optimal guided wave stress measurement strategy, a mathematical model for the propagation of longitudinal guided waves in prestressed steel pipes, based on the principles of acoustoelasticity, is proposed. Using this model, the sensitivity of stress to each sub-mode of the longitudinal guided waves is analyzed, leading to the identification of the optimal guided wave mode (L(0,2) mode) and frequency range. In order to avoid the excitation of other low-sensitivity modes, further analysis of the optimal parameters for the piezoelectric array is conducted. Simulation results indicate that the designed transducer can effectively excite the target mode with high purity. The stress sensitivity of the target mode was experimentally determined to be −2.5×10−5MPa−1, which closely aligns with the theoretical results. Comparative analysis of the experiments emphasizes the influence of modal control on measurement outcomes. By selecting and controlling the appropriate mode, the maximum relative error in stress measurement is observed to be 5%.

A compact dielectric resonator antenna with wideband circular polarization characteristics for C and X‐band applications

AbstractA wideband circularly polarized (CP) stacked rectangular dielectric resonator antenna (RDRA) is proposed in this article. The 3 dB axial ratio (AR) and 10 dB impedance bandwidth overlap of more than 66% is obtained. For increased bandwidth, the antenna comprises two dielectric resonators separated by an air gap. The upper dielectric layer is rotated at relative to the lower layer to obtain orthogonal modes for CP Both layers have dielectric constant . The rotation aids excitation of orthogonal modes , and in RDRA. The higher‐order modes generate left‐hand circular polarization at frequencies 6.75, 7.8, and 10.7 GHz, respectively. The upper layer consists of three holes giving a 10 dB impedance bandwidth of 66.7% from 6.52 to 11.02 GHz. The CP gain of 8.7, 6.8, and 6.4 dBi for 6.75, 7.8, and 10.7 GHz, respectively, is measured. The conformal orthogonal feeds enable a 72 3 dB AR bandwidth across the entire frequency band. The radiation efficiency is observed above 89 in the entire band (6.5–11 GHz). This work demonstrates a 66.7 overlap of 10 dB impedance and 3 dB AR bandwidth along with high gain in a single design which is suitable for 5G applications in C‐band as well as other X‐band applications.

Spontaneous emission, collective phenomena and the efficiency of plasmon-stimulated photoexcitation

We find that the spontaneous and collective emissions have a strong influence on the excitation of two-level absorbers (atoms, molecules) interacting in resonance with the plasmonic mode near the metal nanoparticle. The spontaneous and collective emissions limit the absorption enhancement by the plasmonic mode and make the enhancement possible only with a fast, picosecond population relaxation of the upper absorbing states. Conditions for the maximum of plasmon-enhanced absorption in the presence of spontaneous and collective emissions are found. The nonlinearity in the nanoparticle-absorber interaction and in collective emission causes the bistability in the plasmon-enhanced absorption at high external field intensities and the plasmonic mode excitation.