Excellent Stability Research Articles

Amine-Functionalized Metal-Free Nanocarbon to Boost Selective CO2 Electroreduction to CO in a Flow Cell.

Highly efficient electrochemical CO2-to-CO conversion is a promising approach for achieving carbon neutrality. While nonmetallic carbon electrocatalysts have shown potential for CO2-to-CO utilization in H-type cells, achieving efficient conversion in flow cells at an industrial scale remains challenging. In this study, we present a cost-effective synthesis strategy for preparing ultrathin 2D carbon nanosheet catalysts through simple amine functionalization. The optimized catalyst, NCNs-2.5, demonstrates exceptional CO selectivity with a maximum Faradaic efficiency of 98% and achieves a high current density of 55 mA cm-2 in a flow cell. Furthermore, the catalyst exhibits excellent long-term stability, operating continuously for 50 h while maintaining a CO selectivity above 90%. The superior catalytic activity of NCNs-2.5 is attributed to the presence of amine-N active sites within the carbon lattice structure. This work establishes a foundation for the rational design of cost-effective nonmetallic carbon catalysts as sustainable alternatives to metals in energy conversion systems.

Implementation of a Multi-Functional-Group Strategy for Enhanced Performance of Perovskite Solar Cells through the Incorporation of 3-Amino-4-Phenylbutyric Acid Hydrochloride.

Reducing the defect density of perovskite films during the crystallization process is critical in preparing high-performance perovskite solar cells (PSCs). Here, a multi-functional molecule, 3-phenyl-4-aminobutyric acid hydrochloride (APH), with three functional groups including a benzene ring, ─NH3 + and ─COOH, is added into the perovskite precursor solution to improve perovskite crystallization and device performance. The benzene ring increases the hydrophobicity of perovskites, while ─NH3 + and ─COOH passivate defects related to I- and Pb2+, respectively. Consequently, the power conversion efficiency (PCE) of the optimal device increased to 24.65%. Additionally, an effective area of 1 cm2 with a PCE of 22.45% is also prepared using APH as an additive. Furthermore, PSCs prepared with APH exhibit excellent stability by 87% initial PCE without encapsulation after exposure at room temperature under 25% humidity for 5000 h and retaining 70% of initial PCE after aging at 85°C in an N2 environment for 864 h.

Intrinsically Stretchable Floating Gate Memory Transistors for Data Storage of Electronic Skin Devices.

To propel electronic skin (e-skin) to the next level by integrating artificial intelligence features with advanced sensory capabilities, it is imperative to develop stretchable memory device technology. A stretchable memory device for e-skin must offer, in particular, long-term data storage while ensuring the security of personal information under any type of deformation. However, despite the significance of these needs, technology related to stretchable memory devices remains in its infancy. Here, we report an intrinsically stretchable floating gate (FG) polymer memory transistor. The device features a dual-stimuli (optical and electrical) writing system to prevent easy erasure of recorded data. An FG comprising an intermixture of Ag nanoparticles and elastomer and with proper energy-band alignment between the semiconductor and dielectric facilitated sustainable memory performance, while achieving a high memory on/off ratio (>105) and a long retention time (106 s) with the ability to withstand 50% uniaxial or 30% biaxial strain. In addition, our memory transistor exhibited high mechanical durability over multiple stretching cycles (1000 times), along with excellent environmental stability with respect to factors such as temperature, moisture, air, and delamination. Finally, we fabricated a 7 × 7 active-matrix memory transistor array for personalized storage of e-skin data and successfully demonstrated its functionality.

Improving the Rechargeable Li-CO2 Battery Performances by Tailoring Oxygen Defects on Li-Ni-Co-Mn Multi-Metal Oxide Catalysts Recycled from Spent Ternary Lithium-Ion Batteries.

Rechargeable Li-CO2 batteries are considered as a promising carbon-neutral energy storage technology owing to their ultra-high energy density and efficient CO2 capture capability. However, the sluggish CO2 reduction/evolution kinetics impedes their practical application, which leads to huge overpotentials and poor cyclability. Multi-element transit metal oxides (TMOs) are demonstrated as effective cathodic catalysts for Li-CO2 batteries. But there are no reports on the integration of defect engineering on multi-element TMOs. Herein, the oxygen vacancy-bearing Li-Ni-Co-Mn multi-oxide (Re-NCM-H3) catalyst with the α-NaFeO2-type structure is first fabricated by annealing the NiCoMn precursor that derived from spent ternary LiNi0.8Co0.1Mn0.1O2 cathode, in H2 at 300°C. As demonstrated by experimental results and theory calculations, the introduction of moderate oxygen vacancy has optimized electronic state near the Fermi level (Ef), eventually improving CO2 adsorption and charge transfer. Therefore, the Li-CO2 batteries with Re-NCM-H3 catalyst deliver a high capacity (11808.9 mAh g-1), a lower overpotential (1.54V), as well as excellent stability over 216 cycles at 100mA g-1 and 165 cycles at 400mA g-1. This study not only opens up a sustainable application of spent ternary cathode, but also validates the potential of multi-element TMO catalysts with oxygen defects for high-efficiency Li-CO2 batteries.

Dipole Moment Influences the Reversibility and Corrosion of Lithium Metal Anodes.

Lithium metal batteries (LMBs) must have both long cycle life and calendar life to be commercially viable. However, "trial and error" methodologies remains prevalent in contemporary research endeavors to identify favorable electrolytes. Here, we propose a guiding principle for the selection of solvents for LMBs, which aims to achieve high coulombic efficiency while minimizing the corrosion. For the first time, our study reveals the dipole moment and orientation of solvent molecules have significant impacts on lithium metal reversibility and corrosion. Solvents with high dipole moments are more likely to adsorb onto lithium metal surfaces, which also influences the solid electrolyte interphase. Using this principle, we demonstrate the use of LiNO3 as the sole salt in NCM811/Li cells can achieve excellent cycling stability. Overall, our work bridges the molecular structure of solvents to the reversibility and corrosion of lithium metal, and these concepts can be extended to other metal-based batteries. This article is protected by copyright. All rights reserved.

Nanocavity in hollow sandwiched catalysts as substrate regulator for boosting hydrodeoxygenation of biomass-derived carbonyl compounds.

Hydrodeoxygenation of oxygen-rich molecules toward hydrocarbons is attractive yet challenging in the sustainable biomass upgrading. The typical supported metal catalysts often display unstable catalytic performances owing to the migration and aggregation of metal nanoparticles (NPs) into large sizes under harsh conditions. Here, we develop a crystal growth and post-synthetic etching method to construct hollow chromium terephthalate MIL-101 (named as HoMIL-101) with one layer of sandwiched Ru NPs as robust catalysts. Impressively, HoMIL-101@Ru@MIL-101 exhibits the excellent activity and stability for hydrodeoxygenation of biomass-derived levulinic acid to gamma-valerolactone under 50°C and 1-megapascal H2, and its activity is about six times of solid sandwich counterparts, outperforming the state-of-the-art heterogeneous catalysts. Control experiments and theoretical simulation clearly indicate that the enrichment of levulinic acid and H2 by nanocavity as substrate regulator enables self-regulating the backwash of both substrates toward Ru NPs sandwiched in MIL-101 shells for promoting reaction with respect to solid counterparts, thus leading to the substantially enhanced performance.

Printable MXene Ink Hybridized with ZSM-5 for Gas Sensing and CO2 Capturing

MXene has garnered significant attention as a two-dimensional material with exceptional physicochemical properties for gas sensing development. This study utilized ZSM-5 nanoparticles loaded with MXene to prepare printable inks, aiming to explore novel applications of MXene in the gas sensing field. The morphology of MXene/ZSM-5 was characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), demonstrating the typical layered structure of MXene and particle morphology of composite ZSM-5. X-ray photoelectron spectroscopy (XPS) confirmed no production of TiO2 by providing valence information on elements. Thermogravimetric analysis (TG) revealed excellent thermal stability. To verify functional gas sensing feasibility, various hydrocarbons and common gases underwent adsorption and desorption tests (BET). Results showed that MXene loaded with ZSM-5 exhibited good adsorbability for C4H10, C7H8, SF6, H2O and O2 while having a certain trapping effect on CO2. Through testing and analyzing printing results, it was found that the MXene/ZSM-5 ink overcame dispersion issues present in pure MXene ink.

Directional Formation of Reactive Oxygen Species via a Non-Redox Catalysis Strategy that Bypasses Electron Transfer Process.

A broad range of chemical transformations driven by catalytic processes necessitate the electron transfer between catalyst and substrate. The redox cycle limitation arising from the inequivalent electron donation and acceptance of the involved catalysts, however, generally leads to their deactivation, causing substantial economic losses and environmental risks. Here we provide a "non-redox catalysis" strategy wherein the catalytic units were constructed by atomic Fe and B as dual active sites to create tensile force and electric field, which allowed directional self-decomposition of peroxymonosulfate (PMS) molecules through internal electron transfer to form singlet oxygen, bypassing the need of electron transfer between catalyst and PMS. The proposed catalytic approach with non-redox cycling of catalyst contributed to excellent stability of the active centers, while the generated reactive oxygen species found high efficiency in long-term catalytic pollutant degradation and selective organic oxidation synthesis in aqueous phase. This work offers new avenue for directional substrate conversion, which holds promise to advance the design of alternative catalytic pathways for sustainable energy conversion and valuable chemical production. This article is protected by copyright. All rights reserved.

Eggshell-Like Carbon Microspheres with Curvature Scheme: Distorted Energy Band and Atomic Charge Waves-Driven High Performance for Zinc-Air Battery.

A metal-free nanocarbon with an eggshell structure is synthesized from chitosan (CS) and natural spherical graphite (NSG) as a cathode electrocatalyst for clean zinc-air batteries and fuel cells. It is developed using CS-derived carbons as an eggshell, covering NSG cores. The synthesis involves the in situ growth of CS on NSG, followed by ammonia-assisted pyrolysis for carbonization. The resulting catalyst displays a curved structure and completely coated NSG, showing superior oxygen reduction reaction (ORR) performance. In 1 M NaOH, the ORR half-wave potential reached 0.93 V, surpassing the commercial Pt/C catalyst by 50 mV. Furthermore, a zinc-air battery featuring the catalyst achieves a peak power density of 167 mW cm-2 with excellent stability, outperforming the Pt/C. The improved performance of the eggshell carbons can be attributed to the distorted energy band of the active sites in the form of N-C moieties. More importantly, the curved thin eggshells induce built-in electric fields that can promote electron redistribution to generate atomic charge waves around the N-C moieties on the carbon shells. As a result, the high positively charged and stable C+ sites adjacent to N atoms optimize the adsorption strength of oxygen molecules, thereby facilitating performance.

High responsivity VIS-NIR photodetector based on (PEA)2PbI4/P3HT heterojunction

Two-dimensional (2D) Ruddlesden–Popper (RP) perovskite is an ideal platform for building high-performance photodetectors due to its unique structure, excellent stability, and tunable bandgap. However, 2D perovskite heterojunction photodetectors are still less reported. In this work, the photodetector based on (PEA)2PbI4/P3HT heterojunction was prepared by the liquid-phase solution method under air conditions, which showed a responsivity (R) of 8.38 A W−1 and a specific detectivity (D*) of 6.53 × 1011Jones under 808 nm light. In addition, the device has a transient response time of 79.57 μs/484 μs and a high stability performance that maintains more than 95% of the photocurrent under continuous cycling tests and shows good cyclic stability after 30 days without encapsulation. This work provides a promising strategy for extending 2D perovskite photodetectors in the VIS to NIR spectral range.

Open-Nanogap-Induced Strong Electromagnetic Enhancement in Au/AgAu Monolayer as a Stable and Uniform SERS Substrate for Ultrasensitive Detection.

Nanogap-based plasmonic metal nanocrystals have been applied in surface-enhanced Raman scattering detection, while the closed and insufficient electromagnetic fields as well as the nonreproducible Raman signal of the substrate greatly restrict the actual application. Herein, a highly uniform Au/AgAu monolayer with abundant nanogaps and huge electromagnetic enhancement is prepared, which shows ultrasensitive and reproducible SERS detection. Au/AgAu with an inner nanogap is first prepared based on Au nanotriangles, and the nanogap is opened from the three tips via a subsequent etching process. The open-gap Au/AgAu displays much higher SERS efficiency than Au and Au/AgAu with an inner nanogap on detecting crystal violet due to the open-gap induced electromagnetic enhancement and improved molecular absorption. Furthermore, the open-gap Au/AgAu monolayer is prepared via interfacial self-assembly, which shows further improved SERS due to the dense and strong hotspots in the nanocavities induced by the electromagnetic coupling between adjacent open gaps. The monolayer possesses excellent signal stability, uniformity, and reproducibility. The analytic enhancement factor and relative standard deviation reach to 2.12 × 108 and 4.65% on detecting crystal violet, respectively. Moreover, the monolayer achieves efficient detection of thiram in apple juice, biphenyl-4-thiol, 4-mercaptobenzoic, melamine, and a mixed solution of four different molecules, showing great promise in practical detection.

Mechanically robust and personalized silk fibroin-magnesium composite scaffolds with water-responsive shape-memory for irregular bone regeneration.

The regeneration of critical-size bone defects, especially those with irregular shapes, remains a clinical challenge. Various biomaterials have been developed to enhance bone regeneration, but the limitations on the shape-adaptive capacity, the complexity of clinical operation, and the unsatisfied osteogenic bioactivity have greatly restricted their clinical application. In this work, we construct a mechanically robust, tailorable and water-responsive shape-memory silk fibroin/magnesium (SF/MgO) composite scaffold, which is able to quickly match irregular defects by simple trimming, thus leading to good interface integration. We demonstrate that the SF/MgO scaffold exhibits excellent mechanical stability and structure retention during the degradative process with the potential for supporting ability in defective areas. This scaffold further promotes the proliferation, adhesion and migration of osteoblasts and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro. With suitable MgO content, the scaffold exhibits good histocompatibility, low foreign-body reactions (FBRs), significant ectopic mineralisation and angiogenesis. Skull defect experiments on male rats demonstrate that the cell-free SF/MgO scaffold markedly enhances bone regeneration of cranial defects. Taken together, the mechanically robust, personalised and bioactive scaffold with water-responsive shape-memory may be a promising biomaterial for clinical-size and irregular bone defect regeneration.

Rational Design of Polymeric mRNA Delivery Vectors to Achieve Excellent Room-Temperature Storage Stability and Delivery Efficiency

Rational Design of Polymeric mRNA Delivery Vectors to Achieve Excellent Room-Temperature Storage Stability and Delivery Efficiency

Planar Chlorination Engineering: A Strategy of Completely Breaking the Geometric Symmetry of Fe-N4 Site for Boosting Oxygen Electroreduction.

Introducing asymmetric elements and breaking the geometric symmetry of traditional metal-N4 site for boosting oxygen reduction reaction (ORR) are meaningful and challenging. Herein, the planar chlorination engineering of Fe-N4 site was firstly proposed for remarkably improving the ORR activity. The Fe-N4/CNCl catalyst with broken symmetry exhibited a half-wave potential (E1/2) of 0.917V versus RHE, 49mV and 72mV higher than those of traditional Fe-N4/CN and commercial 20 wt% Pt/C catalysts. The Fe-N4/CNCl catalyst also had excellent stability for 25,000 cycles and good methanol tolerance ability. For Zn-air battery test, the Fe-N4/CNCl catalyst had the maximum power density of 228mW/cm2 and outstanding stability during 150h charge-discharge test, as the promising substitute of Pt-based catalysts in energy storage and conversion devices. The density functional theory calculation demonstrated the adjacent C-Cl bond effectively broke the symmetry of Fe-N4 site, downward shifted the d-band center of Fe, facilitated the reduction and release of OH*, and remarkably lower the energy barrier of rate-determining step. This work revealed the enormous potentials of planar chlorination engineering for boosting the ORR activity of traditional metal-N4 site by thoroughly breaking their geometric symmetry. This article is protected by copyright. All rights reserved.

Towards a greater understanding of the deep eutectic phenomenon through examination of the lidocaine-NSAID therapeutic deep eutectic systems.

Therapeutic deep eutectic solvents (THEDES) have been attracting increasing attention in the pharmaceutical literature as a promising enabling technology capable of improving physicochemical and biopharmaceutical properties for difficult-to-deliver drug compounds. The current literature has explored amide local anaesthetics and carboxylic acid nonsteroidal anti-inflammatories (NSAIDs) as commonly used THEDES formers for their active hydrogen-bonding functionality. However, little is known about what happens within the "deep eutectic" region where a range of binary compositions present simply as a liquid with no melting events detectable across experimentally achievable conditions. There is also very limited understanding of how parent compounds' physicochemical properties could impact upon the formation, interaction mechanism, and stability of the formed liquid systems, despite the significance of these information in dose adjustment, industrial handling, and scaling-up of these liquids. In the current work, we probed the "deep eutectic" phenomenon by investigating the formation and physicochemical behaviours of some chosen lidocaine-NSAID systems across a wide range of composition ratios. Our data revealed that successfully formed THEDES exhibited composition dependent Tg variations with strong positive deviations from predicted Tg values using the Gordon-Taylor theory, suggesting substantial interactions within the formed supramolecular structure. Interestingly, it was found that the parent compound's glass forming ability had a noticeable impact upon such profound interaction and hence could dictate the success of THEDES formation. It has also been confirmed that all successful systems were formed based on charge-assisted hydrogen bonding within their THEDES network, affirming the significant role of partial protonisation on achieving a profound melting point depression. More importantly, the work found that within the "deep eutectic" region there was still an ideal, or thermodynamically preferrable "THEDES point", which would exhibit excellent stability upon exposure to stress storage conditions. The discoveries of this study bring the literature one step closer to fully understanding the "therapeutic deep eutectic" phenomenon. Through correlation between parent reagents' physicochemical properties and the synthesised products' characteristics, we establish a more educated process for the prediction and engineering of THEDES.

Balancing the Binding of Intermediates Enhances Alkaline Hydrogen Oxidation on D-Band Center Modulated Pd Sites.

Exploring efficient alkaline hydrogen oxidation reaction (HOR) electrocatalysts is of great concern for constructing anion exchange membrane fuel cells (AEMFCs). Herein, d-band center modulated PdCo alloys with ultralow Pd content anchored onto the defective carbon support (abbreviated as PdCo/NC hereafter) are proposed as highly efficient HOR catalyst. The as-prepared catalyst exhibits exceptional HOR performance compared to the Pt/C catalyst, achieving thermodynamically spontaneous and kinetically preferential reactions. Specifically, the resultant PdCo/NC demonstrates a marked enhancement in alkaline HOR performance, with the highest mass and specific activities of 1919.6 mA mgPd-1 and 1.9 mA cm-2, 51.1 and 4.2 times higher than those of benchmark of Pt/C, along with an excellent stability in a chronoamperometry test. In the analysis of in situ Raman spectra, it was discovered that tetrahedrally coordinated H-bonded water molecules were formed during the HOR process. This indicates that the promotion of interfacial water molecule formation and enhancement of HOR activities in PdCo/NC are facilitated by defect engineering and the turning of d-band center in PdCo alloy. The essential knowledge obtained in this study could open up a new direction for modifying the electronic structure of cost-effective HOR catalysts through electronic structure engineering.

Synthesis of 1,4-azaphosphinine nucleosides and evaluation as inhibitors of human cytidine deaminase and APOBEC3A

Nucleoside and polynucleotide cytidine deaminases (CDAs), such as CDA and APOBEC3, share a similar mechanism of cytosine to uracil conversion. In 1984, phosphapyrimidine riboside was characterised as the most potent inhibitor of human CDA, but the quick degradation in water limited the applicability as a potential therapeutic. To improve stability in water, we synthesised derivatives of phosphapyrimidine nucleoside having a CH2 group instead of the N3 atom in the nucleobase. A charge-neutral phosphinamide and a negatively charged phosphinic acid derivative had excellent stability in water at pH 7.4, but only the charge-neutral compound inhibited human CDA, similar to previously described 2'-deoxyzebularine (Ki = 8.0 ± 1.9 and 10.7 ± 0.5 µM, respectively). However, under basic conditions, the charge-neutral phosphinamide was unstable, which prevented the incorporation into DNA using conventional DNA chemistry. In contrast, the negatively charged phosphinic acid derivative was incorporated into DNA instead of the target 2'-deoxycytidine using an automated DNA synthesiser, but no inhibition of APOBEC3A was observed for modified DNAs. Although this shows that the negative charge is poorly accommodated in the active site of CDA and APOBEC3, the synthetic route reported here provides opportunities for the synthesis of other derivatives of phosphapyrimidine riboside for potential development of more potent CDA and APOBEC3 inhibitors.

A Manufacturing Method for High-Reliability Multilayer Flexible Electronics by Electrohydrodynamic Printing

To meet the demand for higher performance and wearability, integrated circuits are developing towards having multilayered structures and greater flexibility. However, traditional circuit fabrication methods using etching and lamination processes are not compatible with flexible substrates. As a non-contact printing method in additive manufacturing, electrohydrodynamic printing possesses advantages such as environmental friendliness, sub-micron manufacturing, and the capability for flexible substrates. However, the interconnection and insulation of different conductive layers become significant challenges. This study took composite silver ink as a conductive material to fabricate a circuit via electrohydrodynamic printing, applied polyimide spraying to achieve interlayer insulation, and drilled micro through-holes to achieve interlayer interconnection. A 200 × 200 mm2 ten-layer flexible circuit was thus prepared. Furthermore, we combined a finite element simulation with reliability experiments, and the prepared ten-layer circuit was found to have excellent bending resistance and thermal cycling stability. This study provides a new method for the manufacturing of low-cost, large-sized, multilayer flexible circuits, which can improve circuit performance and boost the development of printed electronics.

Redox-induced controllable engineering of MnO2-MnxCo3-xO4 interface to boost catalytic oxidation of ethane

Multicomponent oxides are intriguing materials in heterogeneous catalysis, and the interface between various components often plays an essential role in oxidations. However, the underlying principles of how the hetero-interface affects the catalytic process remain largely unexplored. Here we report a unique structure design of MnCoOx catalysts by chemical reduction, specifically for ethane oxidation. Part of the Mn ions incorporates with Co oxides to form spinel MnxCo3-xO4, while the rests stay as MnO2 domains to create the MnO2-MnxCo3-xO4 interface. MnCoOx with Mn/Co ratio of 0.5 exhibits an excellent activity and stability up to 1000 h under humid conditions. The synergistic effects between MnO2 and MnxCo3-xO4 are elucidated, in which the C2H6 tends to be adsorbed on the interfacial Co sites and subsequently break the C-H bonds on the reactive lattice O of MnO2 layer. Findings from this study provide valuable insights for the rational design of efficient catalysts for alkane combustion.

Critical Effects of Insoluble Additives in Liquid Electrolytes for Metal Batteries.

Rechargeable metal batteries have received widespread attention due to their high energy density by using pure metal as the anode. However, there are still many fundamental problems that need to be solved before approaching practical applications. The critical ones are low charge/discharge current due to slow ion transport, short cycle lifetime due to poor anode/cathode stability, and unsatisfied battery safety. To tackle these problems, various strategies have been suggested. Among them, electrolyte additive is one of the most widely used strategies. Most of the additives currently studied are soluble, but their reliability is questionable, and they can easily affect the electrochemical process, causing unwanted battery performance decline. On the contrary, insoluble additives with excellent chemical stability, high mechanical strength, and dimensional tunability have attracted considerable research exploration recently. However, there is no timely review on insoluble additives in metal batteries yet. This review summarizes various functions of insoluble additives: ion transport modulation, metal anode protection, cathode amelioration, as well as battery safety enhancement. Future research directions and challenges for insoluble solid additives are also proposed. It is expected this review will stimulate inspiration and arouse extensive studies on further improvement in the overall performance of metal batteries.