Excellent Photocatalytic Degradation Research Articles

Novel Synthesis of Zinc Oxide on Cotton Fabric by Cathodic Cage Plasma Deposition for Photocatalytic and Antibacterial Performance.

Cotton fabrics with zinc oxide (ZnO) coating are of significant interest due to their excellent antibacterial performance. Thus, they are widely in demand in the textile industry due to their medical and hygienic properties. However, conventional techniques used to deposit ZnO on fabric require long processing times in deposition, complex and expensive equipment, and multiple steps for deposition, such as a separate process for nanoparticle synthesis and subsequent deposition on fabric. In this study, we proposed a new method for the deposition of ZnO on fabric, using cathodic cage plasma deposition (CCPD), which is commonly used for coating deposition on conductor materials and is not widely used for fabric due to the temperature sensitivity of the fabric. The effect of gas composition, including argon and a hydrogen-argon mixture, on the properties of ZnO deposition is investigated. The deposited samples are characterized by XRD, SEM, EDS, photocatalytic, and antibacterial performance against Staphylococcus aureus and Pseudomonas aeruginosa bacteria. It is observed that ZnO-deposited cotton fabric exhibits excellent photocatalytic degradation of methylene blue and antibacterial performance, specifically when a hydrogen-argon mixture is used in CCPD. The results demonstrate that CCPD can be used effectively for ZnO deposition on cotton fabric; this system is already used in industrial-scale applications and is thus expected to be of significant interest to garment manufacturers and hospitals.

Z-scheme flower-like Ag/AgCl/NiZnAl-LDH for high efficiency removal of Methylene Blue: Performance and mechanism insights

3D flower-like NiZnAl-LDH was prepared, and then the Z-scheme Ag/AgCl/NiZnAl-LDH heterojunctions were further constructed by loading different amounts of AgCl on NiZnAl-LDH surface. The structure, morphology and photoelectric properties were characterized by a variety of advanced techniques, such as XRD, XPS, SEM, HRTEM and EIS. Furthermore, methylene blue, abbreviated MB, was used as the target pollutant, and the photocatalytic degradation activity of Ag/AgCl/NiZnAl-LDH on it was explored. Results displayed that the Ag/AgCl/NiZnAl-LDH photocatalysts displayed excellent photocatalytic degradation activity for MB dye compared with AgCl and NiZnAl-LDH, and the loading of different AgCl on the surface of NiZnAl-LDH has a considerable influence on the photocatalytic performance. The alkaline condition and low concentration of MB are more conducive to the photocatalytic degradation of MB by Ag/AgCl/NiZnAl-LDH. The photocatalytic process conforms to the first-order kinetic model with a rate constant of 0.0082 min−1, which is about 3.4 times that of AgCl and NiZnAl-LDH. Compared with AgCl and NiZnAl-LDH, it is found that Ag/AgCl/NiZnAl-LDH increases the separation rate of photogenerated electrons and holes, the photogenerated carrier recombination is inhibited, and the electrochemically active area is increased. The outstanding photocatalytic activity and stability make Ag/AgCl/NiZnAl-LDH a perfect material to ease the environmental crisis. Besides, combined with free radical trapping experiments, a possible photocatalytic mechanism was raised.

Flower-like nickel oxide nanostructures: Superior ammonia gas sensing and efficient dye removal behavior under UV–visible light illumination

In this study, we fabricated the NiO nanostructures using a straightforward solvothermal technique. The NiO nanoparticles were characterized using various analytical techniques. The FESEM images clearly show the flower-like structure of NiO nanoparticles. These nanostructures were then employed as a sensor to detect the presence of highly toxic ammonia (NH3) gas. The flower-shaped nanostructures of NiO played a vital role in improving sensing performance. Moreover, the NiO sensor displayed rapid response to 100 ppm ammonia at room temperature, with responses/recovery times of 40 s/44 s. This research holds promise as a viable approach for effectively sensing and detecting NH3 gas. The NiO exhibited excellent photocatalytic activity and degradation rates of 80% and 84.75% for Methyl orange (MO) and methylene blue dye (MB) respectively under UV-visible light irradiation. The NiO nanoflower remains unaffected after recycling MB dye degradation. This effective photocatalytic performance might be due to the formation of flower-like morphology. This underscores the potential of NiO as a promising candidate for applications in environmental and healthcare safety applications.

Europium (III)-modified sunflower-derived carbon dots for fluorescent anti-counterfeiting inks and photocatalysis.

A highly water-soluble and fluorescent N,S-doped carbon dots/europium (N,S-CDs/Eu) was successfully synthesized via a secondary hydrothermal method. This involved surface modification of N,S-CDs derived from sunflower stem pith (SSP) with europium ions (Eu3+) doping. When excited within the range of 400-470 nm, N,S-CDs/Eu exhibited a stable and broad optimal emission wavelength ranging from 505 to 540 nm. Notably, the photoluminescence quantum yield (PLQY) of N,S-CDs/Eu is 31.4%, significantly higher than the 19.5% observed for N,S-CDs. Additionally, by dissolving N,S-CDs/Eu into polyvinyl alcohol (PVA), a uniform fluorescent anti-counterfeiting ink can be prepared. The N,S-CDs/Eu/TiO2 composite demonstrates excellent photocatalytic degradation ability towards the organic dye methylene blue (MB). N,S-CDs/Eu has potential in the field of fluorescent inks and photocatalysis due to its simple and efficient preparation and excellent properties.

Rigid covalent organic frameworks with thiazole linkage to boost oxygen activation for photocatalytic water purification

Owing to their capability to produce reactive oxygen species (ROS) under solar irradiation, covalent organic frameworks (COFs) with pre-designable structure and unique architectures show great potentials for water purification. However, the sluggish charge separation, inefficient oxygen activation and poor structure stability in COFs restrict their practical applications to decontaminate water. Herein, via a facile one-pot synthetic strategy, we show the direct conversion of reversible imine linkage into rigid thiazole linkage can adjust the π-conjugation and local charge polarization of skeleton to boost the exciton dissociation on COFs. The rigid linkage can also improve the robustness of skeleton and the stability of COFs during the consecutive utilization process. More importantly, the thiazole linkage in COFs with optimal C 2p states (COF-S) effectively increases the activities of neighboring benzene unit to directly modulate the O2-adsorption energy barrier and improve the ROS production efficiency, resulting in the excellent photocatalytic degradation efficiency of seven toxic emerging contaminants (e.g. degrading ~99% of 5 mg L−1 paracetamol in only 7 min) and effective bacterial/algal inactivation performance. Besides, COF-S can be immobilized in continuous-flow reactor and in enlarged reactor to efficiently eliminate pollutants under natural sunlight irradiation, demonstrating the feasibility for practical application.

Photocatalytically active layered double hydroxide-PVDF composite membranes for effective remediation of dyes contaminated water

In this work, polyvinylidene fluoride (PVDF) intercalated CuFe layered double hydroxides (LDH) membranes were fabricated and investigated for UV-LED/persulfate degradation of methylene blue (MB), crystal violet (CV), methyl orange (MO), and Eriochrome black T (EBT) dyes from water. The PVDF-CuFe membrane exhibited improved heterogeneity, surface functionality (CuO, Fe–O, Cu–O–Fe), surface roughness, and hydrophilicity. The process parameters were optimized by response surface methodology, and maximum MB removal (100%) was achieved within 45.22–178.5 min at MB concentration (29.45–101.93 mg/L), PP concentration (0.5–2.41 g/L) and catalyst dosage (1.84–1.95 g/L). The degradation kinetics was well described by a pseudo-first-order model (R2 = 0.982) and fast reaction rate (0.029–0.089/min). The MB dye degradation mechanism is associated with HO·/SO4•− reactive species generated by Fe3+/Fe2+ or Cu2+/Cu+ in PVDF-CuFe membrane and PP dissociation. The PVDF-CuFe membrane demonstrated excellent recyclability performance with a 12% reduction after five consecutive cycles. The catalytic membrane showed excellent photocatalytic degradation of crystal violet (100%), methyl orange (79%), and Eriochrome black T (60%). The results showed that UV-LED/persulfate-assisted PVDF-CuFe membranes can be used as a recyclable catalyst for the effective degradation of dye-contaminated water streams.

Construction of multi-functional S-Vacancy-Zn3In2S6/Bi-MOF S-scheme heterojunction containing interfacial chemical bonds for the efficient photocatalytic production of H2O2 and excellent photocatalytic degradation of OTC and TC

Designing outstanding S-scheme heterojunction photocatalysts for eliminating pharmaceutical pollution and energy dilemmas is an effective strategy for tackling the issue of global environmental pollution. Herein, the Zn3In2S6/Bi-MOF S-scheme heterojunction was prepared through a facile in-situ hydrothermal method. The Bi-S bonds were introduced into the interface of an S-vacancy-containing Zn3In2S6/Bi-MOF S-scheme heterojunction, which profoundly boosts migration and separation of photogenerated carriers as the highway for electron transfer. The practical significance of Zn3In2S6/Bi-MOF composites for environmental pollution control was assessed using oxytetracycline (OTC) and tetracycline (TC) as representative pharmaceutical pollutants. Simultaneously, the production performance of H2O2 as a new energy carrier was also evaluated to determine the multi-functionality of the Zn3In2S6/Bi-MOF composite. The H2O2 production rate of optimal proportion photocatalyst reaches 3689.94 μmol/g/h without using the sacrificial agent. In addition, it exhibited a photocatalytic degradation of OTC and TC efficiency of 88.1 % and 65.2 % within 60 min, respectively. The Zn3In2S6/Bi-MOF photocatalytic not only exhibits excellent cyclic stability but also has exceptional anti-interference properties-systematic elucidation of the effects of catalyst dosage, pH, and co-existing substances. The efficient photocatalytic production of H2O2 and the degradation of OTC/TC through Bi-S bonds and VS-modificatory S-scheme charge transfer offer valuable new perspectives for designing photocatalysts.

Facilistic preparation of zinc oxide nanoarrays on nickel foam via a one-step chemical bath method for photocatalysis

One-dimensional ZnO nanoarrays (ZnO NAs) were prepared on nickel foam using a one-step chemical bath deposition method. SEM and XRD confirmed the successful preparation of ZnO nanoarrays. TEM and Raman spectroscopy confirmed the preferential orientation of the ZnO nanorods along the (002) crystal plane. The Ni/ZnO NAs composites exhibited excellent photocatalytic degradation activity for ciprofloxacin (CIP) under UV light. UV–visible diffuse reflectance and transient photocurrent response characterization revealed that compared with ZnO nanorod powder, the Ni/ZnO NA composites increased the light absorption and reduced the complexation rate of photogenerated electron-hole pairs, thus improving the photocatalytic efficiency. In addition, the electron work functions of the two substances were calculated by using the crystal faces of Ni (111) and ZnO (002), and the calculation results confirmed the electron transfer paths. Electron transfer pathways further confirmed the possible reaction mechanism of Ni/ZnO NA degradation of CIP. Finally, Mott–Schottky tests were used to investigate the structure of the energy bands of the material and reveal its photocatalytic mechanism.

Three CoS/CoO microspheres and their mixed matrix membranes for the highly efficient photocatalytic degradation of methyl blue.

Photocatalytic degradation technology, as one of the most important advanced oxidation technologies for environmental remediation, has attracted great attention in recent years, but designing photocatalysts with excellent photocatalytic activity and good reusability remains a challenge. Herein, three CoS/CoO microspheres (CoS/CoO-M-1 (1), CoS/CoO-M-2 (2), and CoS/CoO-M-3 (3)) were prepared via a hydrothermal method using cobalt chloride hexahydrate, thiourea, deionized water and polyethylene glycol (PEG) with different polymerization degrees as raw materials, which have a uniform size distribution in the range of 5-24 μm and specific surface areas of 6.1924 m2 g-1 (1), 6.2870 m2 g-1 (2) and 6.6663 m2 g-1 (3). It is worth noting that all the three CoS/CoO microspheres showed a wide optical absorption range from the ultraviolet to the near-infrared (NIR) region and a high photocatalytic activity for degrading methyl blue under visible light (500 W metal halide lamp) irradiation. In order to improve the portability and recyclability of 3, a mixed matrix membrane (MMM) of 3 (3-MMM) was manufactured by coating a mixture dispersion of 3 and polyvinylidene fluoride (PVDF) on a glass substrate, which not only displayed excellent photocatalytic degradation performance, but also showed good portability and reusability (cycles > 12 times). Furthermore, adsorption and photocatalytic kinetics and possible mechanisms were studied.

Threefold enhanced photodegradation of methylene blue using MgO composite with minimum Nd2O3: finding the sweet spot.

Removal of organic dyes like methylene blue (MB) from industrial effluents serves as potential source of potable water. Photocatalytic degradation using sustainable catalyst is deemed to be an affordable solution. In this work, Nd2O3/MgO nanocomposite with different compositions (1, 3, and 5wt% Nd2O3 with MgO) have been achieved using hydrothermal synthesis and characterized extensively. Interestingly, increasing Nd2O3 proportion (1-5%) enhances light absorption, and decreases band gap and electron-hole recombination. The efficacy of the photocatalysts is tested with the degradation of MB dye, through optimizing Nd2O3/MgO proportion, contact time, catalyst dose, and pH. Interestingly, control experiments reveal that 5wt% Nd2O3/MgO achieve 99.6% degradation of MB in 90min at pH 7, compared to 88.8% with bare MgO under same condition. Kinetic data show that 5wt% Nd2O3/MgO exhibits ca. 3 times higher degradation rate compared to MgO. For the first time, our work enable MgO-based sustainable photocatalyst development with minimum (5wt%) rare-earth combination to achieve excellent photocatalytic degradation performance.

Interlayered double-doped N,P-MXene/ZnIn2S4 Schottky junction composite photocatalyst: Efficient removal of ciprofloxacin and methyl orange from complex wastewater

In this study, N and P were used to double doping MXene to obtain N,P-MXene with increased layer spacing and structural defects. Schottky junction N,P-MXene/ZnIn2S4 photocatalysts with tight interfacial contacts were obtained by in situ growth of flower-like ZnIn2S4 nanosheets. The N,P-MXene interlayer spatial structure facilitates the uniform dispersion of ZnIn2S4 and the exposure of the active site. The formation of the Schottky barrier enables the two closely contacted interfaces to form a carrier transport channel, which accelerates the arrival of the charge carriers on the catalyst surface for REDOX reactions. 50 N,P-MXene/ZIS degraded 86.1 % of CIP and 93.9 % of MO. In addition, after several cycling experiments, it was proved that the photocatalyst had good structure and chemical stability. The photocatalytic mechanism was demonstrated by UPS and radical quenching experiments. N,P-MXene/ZnIn2S4 is not only suitable for pH = 7–11, but also for salt solution wastewater containing higher concentrations of NaCl or KCl. Therefore, the construction of heteroatom doped N,P-MXene/ZnIn2S4 Schottky junction photocatalysts with excellent photocatalytic degradation performance is of profound significance for the treatment of pollutants.

Imparting Photocatalytic and Antioxidant Properties to Electrospun Poly(L-lactide-co-D,L-lactide) Materials.

The focus of the present study is on the fabrication of effective and eco-friendly hybrid electrospun materials based on poly(L-lactide-co-D,L-lactide) (PLDLLA), Fe3O4 and ZnO with an appropriate design for antioxidant and photocatalytic performance. The design of the fibrous materials was purposely tailored in one step by electrospinning and simultaneous electrospinning/electrospraying. Electrospinning of PLDLLA and its mixture with Fe3O4 resulted in the fabrication of materials with design type "in". Furthermore, the surface of the electrospun PLDLLA and Fe3O4-in-PLDLLA was decorated with ZnO particles by simultaneous electrospraying, thus materials with design type "on" were obtained. In this case, quaternized N,N,N-trimethyl chitosan iodide (QCOS) was used as a sticking agent of ZnO particles onto the fiber's surface. Different structures and morphologies of the electrospun materials were observed by SEM equipped with EDX and TEM. TGA and XRD analyses show that the presence of inorganic particles had an impact on the thermal properties and crystallinity of the electrospun materials. Furthermore, the material type "on" showed improved wettability with a water contact angle less than 90° compared to the material type "in" with an angle larger than 90°. In particular, the presence of Fe3O4 imparts complementary magnetic properties, while ZnO considerably increased the antioxidant activity of the fibrous materials. Materials with design type "on" displayed over 70% radical scavenging capacity in contrast to the material type "in" with less than 20% capacity within 30 min of contact. Moreover, the purposely tailored design type "on" materials provided excellent photocatalytic degradation of model organic pollutant methylene blue dye under UV light irradiation even after 5-fold use, and at the end of the fifth cycle these materials degraded more than 90% of the dye. These results reveal not only a strategy for the fabrication of electrospun hybrid bio-based materials with targeted design but also provide a promising, simple and effective way for mitigating water pollution.

A Tight-Connection g-C3N4/BiOBr (001) S-Scheme Heterojunction Photocatalyst for Boosting Photocatalytic Degradation of Organic Pollutants.

The efficient separation of photogenerated charge carriers and strong oxidizing properties can improve photocatalytic performance. Here, we combine the construction of a tightly connected S-scheme heterojunction with the exposure of an active crystal plane to prepare g-C3N4/BiOBr for the degradation of high-concentration organic pollutants. This strategy effectively improves the separation efficiency of photogenerated carriers and the number of active sites. Notably, the synthesized g-C3N4/BiOBr displays excellent photocatalytic degradation activity towards various organic pollutants, including methylene blue (MB, 90.8%), congo red (CR, 99.2%), and tetracycline (TC, 89%). Furthermore, the photocatalytic degradation performance of g-C3N4/BiOBr for MB maintains 80% efficiency under natural water quality (tap water, lake water, river water), and a wide pH range (pH = 4-10). Its excellent photocatalytic activity is attributed to the tight connection between g-C3N4 and BiOBr in the S-scheme heterojunction interface, as well as the exposure of highly active (001) crystal planes. These improve the efficiency of the separation of photogenerated carriers, and maintain their strong oxidation capability. This work presents a simple approach to improving the separation of electrons and holes by tightly combining two components within a heterojunction.

FeOOH Nanosheets Coupled with ZnCdS Nanoparticles for Highly Improved Photocatalytic Degradation of Organic Dyes and Tetracycline in Water.

Developing a low-cost and highly efficient semiconductor photocatalyst for the decomposition of organic pollutants and antibiotics is highly desirable. Herein, FeOOH nanosheets were prepared using a liquid-phase stirring technique and combined with ZnCdS (ZCS) nanoparticles to construct FeOOH/ZCS nanocomposite photocatalysts. The photocatalytic efficiency of the FeOOH/ZCS nanocomposite was evaluated for the decomposition of various pollutants, including rhodamine B, methylene Blue, and tetracycline. The FeOOH/ZCS nanocomposite exhibited significantly higher photocatalytic performance for the decomposition of various organics. Moreover, the optimized FeOOH/ZCS retained more than 90% of its initial photocatalytic activity even after five successful runs. Radical quenching test and electron spin resonance (ESR) analysis revealed that hydroxyl radicals (•OH) play a dominant role for the decomposition of organics. The FeOOH/ZCS Z-scheme heterojunction significantly facilitates higher charge transfer efficiency and the generation of reactive radicals, resulting in excellent photocatalytic degradation performance. This work offers a new approach to synthesis FeOOH-based photocatalyst for the elimination of organics and antibiotics in water.

One-step thermal oxidation synthesis of carbon-doped TiO2 with enhanced photocatalytic activity using CO2 as the carbon source

The study proposed a simplified carbon doping synthesis strategy to enhance the photocatalytic activity of titanium dioxide (TiO2). Utilizing CO2 gas as the carbon source, the material was directly synthesized onto a titanium substrate through a one-step thermal oxidation method. Raman and XPS analyses indicated that with the increase in CO2 partial pressure, the influence of the carbon source was amplified, resulting in carbon doping in a graphite-like structure and the induction of oxygen vacancies. Electrochemical impedance spectroscopy and UV–vis spectra demonstrated that the introduced carbon species acted as a photosensitizer, augmenting the transfer of photogenerated carriers. Photoluminescence spectra suggested that oxygen vacancies could enhance the non-radiative scattering of photogenerated carriers. These two effects synergistically improved the photocatalytic activity of TiO2 significantly, although the degree of enhancement was dependent on the optimized ratio of carbon content to oxygen vacancy content. Only with optimal carbon content and oxygen vacancy levels could the undesired radiative recombination of photogenerated carriers be prevented, ensuring that the energy derived from visible light was effectively utilized to drive chemical reactions. Under these optimal conditions, the TC-O5 and TC-O10 samples exhibited excellent photocatalytic degradation performance of methyl orange under visible light, with degradation rates of 86.27% and 82.54%, respectively, and displayed outstanding cycling stability, with the degradation rate remaining above 90% for three cycles. This method proved to be simple, efficient, and easily operable, offering significant advantages for industrial-scale preparation.

Effect of phase structure of Bi5O7I on the photocatalytic activity of S-scheme AgBr/Ag/Bi5O7I

The synthesis of pure needle-shaped monoclinic-Bi5O7I (m-Bi5O7I) was reached for the first time at pH 12.2 under a hydrothermal condition, using bismuth citrate as a Bi source. To enhance the photocatalytic activity of m-Bi5O7I, S-scheme AgBr/Ag/m-Bi5O7I (denoted as AAmB) was constructed via a photodeposition method. AAmB exhibited excellent photocatalytic degradation performance towards methylene blue (MB) under visible light illumination with apparent rate constants (0.01047 min−1), and it is approximately 4 times higher than that of AgBr/Ag/orthorhombic-Bi5O7I (plate-shaped) (called as AAoB) (0.00267 min−1) prepared at pH 12.5. Besides, the specific surface area of as-constructed AAmB heterojunction (18.5 m2·g−1) was also higher than that of AAoB (1.0 m2·g−1). These results indicate that the phase structure of Bi5O7I influences the morphology and specific surface area of the heterojunction. Furthermore, AAmB showed superior photodegradation activity for other pollutants, such as tetracycline (TC), bisphenol A (BPA), rhodamine B (RhB), etc. When bismuth nitrate was used as a raw material, only o-Bi5O7I was obtained at a wide pH range from 12 to 13, and the photocatalytic performance of the as-constructed AgBr/Ag/o-Bi5O7I heterojunction based on this o-Bi5O7I was notably lower than that of AAmB.

Facile Synthesis to Porous TiO2 Nanostructures at Low Temperature for Efficient Visible-Light Degradation of Tetracycline.

In this study, nanoporous TiO2 with hierarchical micro/nanostructures was synthesized on a large scale by a facile one-step solvothermal method at a low temperature. A series of characterizations was performed and carried out on the as-prepared photocatalysts, which were applied to the degradation of the antibiotic tetracycline (TC). The results demonstrated that nanoporous TiO2 obtained at a solvothermal temperature of 100 °C had a spherical morphology with high crystallinity and a relatively large specific surface area, composed of a large number of nanospheres. The nanoporous TiO2 with hierarchical micro/nanostructures exhibited excellent photocatalytic degradation activity for TC under simulated sunlight. The degradation rate was close to 100% after 30 min of UV light irradiation, and reached 79% only after 60 min of visible light irradiation, which was much better than the photodegradation performance of commercial TiO2 (only 29%). Moreover, the possible intermediates formed during the photocatalytic degradation of TC were explored by the density functional theory calculations and HPLC-MS spectra. Furthermore, two possible degradation routes were proposed, which provided experimental and theoretical support for the photocatalytic degradation of TC. In this study, we provide a new approach for the hierarchical micro/nanostructure of nanoporous TiO2, which can be applied in industrial manufacturing fields.

A novel composite (Bi2WO6/TiS2) presenting an excellent Z-scheme photocatalytic degradation for methylene blue dye under the visible light irradiation

The current research direction in the field is the development of a Z-scheme composite photocatalyst for the purpose of degrading organic materials in water. The Solvo-thermal synthesis method was employed to successfully synthesize a novel Z-scheme photocatalyst namely Bi2WO6/TiS2@3 %, Bi2WO6/TiS2@6 % and Bi2WO6/TiS2@9 % which is driven by visible light. The materials physicochemical properties were assessed using several analytical methods i.e. XRD, EDX, SEM, TEM, FTIR, UV–vis, PL, Raman spectroscopy and EIS. The Bi2WO6/TiS2@6 % composite revealed the maximum photocatalytic efficiency in the removal of MB dye (98 %) in 70 min. The results of the free radical trap studies indicate that h+ and •O2− are the primary free radicals involved in the photocatalytic degradation. The photocatalytic performance of the composite was improved due to the creation of a heterojunction between Bi2WO6 and TiS2 resulted in enhanced electron conduction, efficient separation of photogenerated e- and h+. Furthermore, it has been shown through six cycle test that the hybrid material consisting of Bi2WO6/TiS2@6 % exhibited a consistent degrading capability (91 %) during the photodegradation process. This distinctive heterojunction photocatalyst material exhibits extensive potential for application in the elimination of organic contaminants and cleanup of the environment.

Sulfur vacancy-induced 1T-MoS2 co-catalyst loaded on Zn3In2S6 for simultaneous promoting photocatalytic hydrogen evolution and pollutant degradation

In the field of photocatalytic hydrogen evolution, Zn3In2S6 has caught tremendous attention because of its suitable band gap and outstanding stability. However, the lower number of active sites as well as lower efficiency of photoproduced carrier separation restricted its further application. Introducing co-catalysts and structural defects are effective methods to solve the above problems. In this paper, Zn3In2S6 loaded metal phase MoS2 to construct flower-shaped spherical catalysts 1T-MoS2/Zn3In2S6 (M/ZIS6) with abundant sulfur vacancies. The visible-light-driven photocatalytic hydrogen evolution rate of 2.4 % M/ZIS6 was 8.71 mmol∙g−1·h−1, which far exceeded those of pure Zn3In2S6 (0.80 mmol∙g−1·h−1) and 2.4 % Pt/Zn3In2S6 (3.86 mmol∙g−1·h−1). Moreover, 2.4 % M/ZIS6 simultaneously displayed the excellent photocatalytic degradation performance toward acid orange 7 (AO7) in the hydrogen evolution reaction process. Co-catalyst metal phase 1T -MoS2, abundant sulfur defects, and a large and dense contact interface between 1T -MoS2 and Zn3In2S6 mainly contributed to the enhanced photocatalytic performance of 2.4 % M/ZIS6. This work provided a potential concept to construct efficient photocatalysts with noble metal-free co-catalyst for bifunctional applications.

Conical porous hollow g-C3N4 charge separation with high efficiency for enhancing visible-light photocatalytic activity

The performance of the photocatalysts is influenced by factors such as electron generation ability, charge separation rate, and active sites distribution. In this study, needle-shaped precursors were prepared through low-temperature supramolecular self-assembly, and conical porous hollow carbon nitride (PHCN) was obtained after high-temperature pyrolysis. The PHCN not only possesses a thin-walled porous structure but also contains nitrogen defects embedded in its structure, which synergistically enhance the efficiency of photogenerated charge separation and provide more reactive sites. The DFT calculations showed that nitrogen defects and Pt-loading synergistically optimize the intermediate reaction process of graphitic carbon nitride (g-C3N4). PHCN had excellent photocatalytic degradation of tetracycline hydrochloride (TCH) and Rhodamine B (Rh B). The photocatalytic hydrogen evolution rate of PHCN was 20.0 times higher than that of bulk g-C3N4 (BCN). This study elucidated the relationship between crystallization rate and precursor morphology, as well as the influence of their physicochemical properties on photocatalytic performance. It also lays the foundation for constructing materials with nitrogen defects and special morphology through supramolecular self-assembly.