Excellent Electromagnetic Wave Absorption Research Articles

Excellent dielectric response and microwave absorption in magnetic field-induced magnetic ordered structures

Weak interactions prevent the magnetic particles from achieving excellent electromagnetic wave absorption (EMA) at a low filler loading (FL). The construction of one-dimensional magnetic metal fibers (1D-MMFs) contributes to the formation of an electromagnetic (EM) coupling network, enhancing EM properties at a low FL. However, precisely controlling the length of 1D-MMFs to regulate permittivity at low FL poses a challenge. Herein, a novel magnetic field-assisted growth strategy was used to fabricate Co-based fibers with adjustable permittivity and aspect ratios. With a variety of FL changes, centimeter-level Co long fibers (Co-lf) consistently exhibited higher permittivity than Co particles and Co short fibers due to the enhancement of the effective EM coupling. The Co-lf exhibits excellent EMA performance (–54.85 dB, 5.8 GHz) at 10 wt.% FL. Meanwhile, heterogeneous interfaces were introduced to increase the interfacial polarization through a fine phosphorylation design, resulting in elevated EMA performances (–51.50 dB, 6.6 GHz) at 10 wt.% FL for Co2P/Co long fibers. This study improves the orderliness of the particle arrangement by regulating the length of 1D-MMFs, which affects the behavior of electrons inside the fibers, providing a new perspective for improving the EMA properties of magnetic materials at a low FL.

Cationic pre-insertion interlayer engineering of manganese dioxide for highly efficient electromagnetic wave absorption

Interlayer engineering of two-dimensional structural materials provides unique advantages for tuning the electromagnetic properties of metal oxides, injecting unlimited energy into the design of advanced two-dimensional metal oxide electromagnetic wave absorbers. In this study, Manganese dioxide intercalated with alkali metal ions was prepared by a simple molten salt method. The pre-intercalation of ions not only enhances the polarization loss at the heterogeneous interface between cations (point sites) and manganese dioxide (face sites) but also alters the energy band structure of manganese oxide and enhances its electrical conductivity, which in turn enhances the conductive loss of the manganese dioxide. Due to the synergistic effect of multiple polarizations and conductive losses, NaMO exhibits superb electromagnetic wave absorption properties and an effective absorption bandwidth of 5.36 GHz at thinner matched thicknesses. In addition, the RCS simulation result further verifies the excellent electromagnetic wave absorption capability of NaMO. Under the positive incidence of electromagnetic waves, the electromagnetic wave reflection intensity of the metal plate coated with NaMO is effectively reduced. Finally, this work establishes a new way to modulate the electromagnetic properties.

Molecular Intercalation‐Induced Two‐Phase Evolution Engineering of 1T and 2H‐MS2 (M = Mo, V, W) for Interface‐Polarization‐Enhanced Electromagnetic Absorbers

AbstractPolarization at interfaces is an important loss mechanism for electromagnetic wave (EMW) attenuation, though the motion behavior of carriers in interfaces composed of different types of conductors has yet to be investigated. Tuning the phase structure of transition metal dichalcogenides (TMDs) MS2 (M = Mo, V, W) by organics small molecule intercalation to achieve the modulation of interfacial types is an effective strategy, where 1T‐MS2 exhibits metallic properties and 2H‐MS2 has semiconducting properties. To exclude the contribution of the intrinsic properties of TMDs materials, three TMDs (MoS2, VS2, and WS2), which also possess phase transitions, are investigated. Among them, the 1T‐MS2 composite exhibits excellent EMW absorption performance under the synergistic effect of interfacial polarization and conduction loss. 1T‐MoS2/MOF‐A exhibits the best EMW absorption performance with an RLmin of −61.07 dB at a thickness of 3.0 mm and an EAB of 7.2 GHz at 2.3 mm. The effectiveness of the modulation of the interfacial polarization using 1T‐phase and 2H‐phase MS2 is demonstrated, which is important for the analysis of the carrier motion behavior during the interfacial loss.

Enhanced electromagnetic wave absorption of magnetite-spinach derived carbon composite

The high density, high cost, and environmental pollution hinder the application of iron-based electromagnetic wave-absorbing materials. Although bio-carbon is a green and lightweight dielectric wave-absorbing material, the wave-absorbing performance of bio-carbon is still limited. This work successfully combined magnetite Fe3O4 with porous carbon derived from spinach stem using hydrothermal and calcination methods. This process optimizes the matching of the dielectric constant and magnetoconductivity of the as prepared composite material, resulting in a significant improvement in electromagnetic microwave absorption capacity. XRD, SEM, TEM, XPS, VSM and EMW absorption network analyzer are used to detect and characterize the samples. The composite material shows a excellent minimum reflection loss value of −48.81 dB and an efficacious absorption bandwidth of 4.73 GHz at the optimal raw material ratio. The tests also show the porous structure of the sample with the coercivity and saturation magnetization of 29.36 Oe and 10.75 emu/g, respectively. The test results indicate that the excellent electromagnetic wave absorption is due to the synergistic effect of multiple reflection, Debye relaxation, and interfacial polarization. This Fe3O4-bio-carbon composite is cheap and simple to prepare, and it also has excellent wave absorption performance. Therefore, it shows great application potential in civilian and military electromagnetic wave absorption fields.

Silica coated MOFs-derived composites with excellent electromagnetic wave absorption and corrosion resistance

The microwave absorber with excellent corrosion resistance is an ideal layer for stealth applications in marine environments. Silica coated MOF-derived anti-corrosion absorbers were successfully fabricated by the Stöber method. The resulting powder demonstrated excellent performance not only in microwave absorption but also in corrosion resistance. The effective absorption bandwidth (EAB) of coated-12 reached 4.1 GHz and the minimum reflection loss (RLmin) came to −59.8 dB at 15.18 GHz in a 1.3 thickness with an 80 wt% filling ratio. The outstanding absorption performance is put down to the matched impedance and the various loss mechanism synergy. Besides, the electrochemical corrosion test revealed that the compact silica coating protected the inner corrodible magnetic metal nanoparticles from the outer corrosive environment. This work provides a reasonable and feasible method for synthesizing an excellent microwave absorber suitable for harsh environments.

Multiple relaxation behavior of Cf/mullite composites and their electromagnetic wave performance at high temperatures

Reliability and stability of electromagnetic wave absorption (EMA) materials used in high-temperature fields such as aircraft and aero-engines are of great interest. In this regard, the Cf/mullite composites with an opportune heterogeneous interface were fabricated using gel-casting and pressureless sintering techniques. The as-prepared composites exhibited excellent EMA performance with multiple relaxation behavior upon increasing testing temperature ranging from 25 °C to 800 °C (the minimum reflection loss (RLmin) of −62.67 dB with a thin thickness of 2 mm at 600 °C). The results demonstrated that the temperature-dependence complex permittivity with multiple relaxation characteristics plays a key role for the EMA performance evolution. The newly generated Cole-Cole semicircle and κ curves with an increasing number of intersections at zero values suggest that the polarization relaxation is enhanced with rising temperatures, thus improving the EMA capacity. It is believed that the Cf/mullite composite could be a new promising EMA material at high temperatures.

Phase structure-induced amplification of interfacial polarization loss for excellent electromagnetic wave absorption

The development of multicomponent dielectric composites has emerged as a predominant approach to achieving exceptional electromagnetic (EM) wave absorbers. However, elucidating the intrinsic characteristics and absorption mechanism for EM wave absorbers poses significant challenges due to the intertwined discussion of electromagnetic loss with dipole polarization loss, defects/interfacial polarization, and conductive loss, among others. To address this issue, manganese selenide (MnSe) nanocrystals with different phase structures are synthesized successfully by the thermal injection decomposition method, including star-shaped α-MnSe nanocrystals and tetrapod-shaped γ-MnSe nanocrystals, which were combined with rGO layers to form α-MnSe/rGO composites and γ-MnSe/rGO composites. Through controllable phase structure, tune the interfacial charge transfer and establish the link between interfacial polarization and EM wave absorption. Owing to the boosted interfacial polarization loss provided by the star-shaped α-MnSe nanocrystals and rGO layers, α-MnSe/rGO composites harvest an RLmin of −62.4 dB (2.7 mm) and a broad bandwidth of 7.52 GHz at 2.9 mm. This study successfully breaks through the limitations of conventional component design, establishing a robust correlation between phase structure/interfacial polarization and electromagnetic wave dissipation capability. These findings provide valuable insights for developing advanced materials with enhanced electromagnetic wave absorption properties.

Microstructure and EMW absorption properties of PDCs-SiCN(Ti) ceramics with adjustable SiC nanowires and TiC nanocrystallines

Herein, a novel type of ceramic material exhibiting tunable electromagnetic properties was synthesized using the polymer-derived ceramics (PDCs) method. The precursor employed in this process was a tetrabutyl titanate-modified polysilazane, which ultimately led to the formation of PDCs-SiCN(Ti) ceramics. High-temperature annealing (1400 °C-1500 °C) was used to prepare PDCs-SiCN(Ti) ceramics, which exhibited a unique dual nanostructure comprising SiC nanowires and TiC nanocrystals and served as effective nanoabsorbents. The SiC and TiC contents are closely related to the annealing temperature and induced Ti content. After annealing at 1500 °C, the PDCs-SiCN(Ti) ceramics with the typical A + B + C electromagnetic absorbing structure exhibited excellent electromagnetic wave (EMW) absorption properties. The PDCs-SiCN(Ti) ceramics, with a Ti content of 5 wt%, demonstrated an effective absorption bandwidth (EAB) of 3.8 GHz, which encompassed 90.5 % of the X band, despite having a relatively thin impedance matching thickness of only 2.1 mm. The outstanding EMW attenuation capability of the PDC-SiCN(Ti) ceramics can be ascribed to their large specific surface area and defects combined with the high permittivity of dispersed TiC nanocrystals, which facilitates multiple reflections of EMW within the SiCN matrix. Therefore, this work provides a controllable preparation method for PDCs-SiCN(Ti) ceramics with various microwave absorbing phases.

High-performance electromagnetic wave absorption by two-dimensional mesoporous monolayer Ti3C2Tx MXene

Transition metal carbide MXene, with its unique chemical composition, structure and sizeable particular surface area, is widely applied in wave absorption. However, the high conductivity of MXene resulted in an impedance mismatch that prevented electromagnetic waves from entering the material to achieve dissipation, and thus, tuning the intrinsic properties of pure MXene to obtain excellent electromagnetic wave absorption is still a challenge. Here, we strengthen the absorption of electromagnetic waves by generating titanium vacancies through hydrogen peroxide etching and thus forming micro-sized wrinkles with porous MXene. Porous MXene possesses an excellent microstructure and surface state, abundant porous defects, and moderate electrical conductivity, allowing it to achieve well-matched impedance, dipole polarization, and conduction loss, thus inheriting excellent electromagnetic wave absorption (EWA) properties. Therefore, the porous MXene achieves a strong absorption of − 63.31 dB and an adequate absorption bandwidth (EAB) of 6.88 GHz at a matched thickness of 2.39 mm with a fill ratio of 6 wt%.

Porous CoZn@NC skeletons supported NiCo2S4 nanorods for efficient electromagnetic wave absorption

Bimetallic sulfides are promising in electromagnetic wave (EMW) absorption due to their moderate permittivity and high dielectric loss. However, the impedance mismatching and insufficient loss mechanism of bimetallic sulfides result in limited EMW absorption performance. Herein, bimetallic sulfide (NiCo2S4) nanorods were loaded onto nitrogen-doped carbon embedded with CoZn nanoparticles (CoZn@NC) derived from CoZn-based metal organic framework (CoZn-MOF) through simple hydrothermal and vulcanization processes. Importantly, during the vulcanization process, CoZn@NC undergoes structural reorganization and evolves into defect-rich porous nanosheets, which promotes dipole polarization and enhance EMW absorption ability. Additionally, the formed NiCo2S4 nanorods are tightly anchored on the porous CoZn@NC skeletons, forming a large number of heterostructures, and promoting interfacial polarization. In addition, the carbon nanotubes (CNTs) formed during the pyrolysis process of CoZn-MOF contribute to the conduction loss of the heterostructure and motivate dielectric loss. Therefore, CoZn@NC/NiCo2S4 heterostructures inherit excellent EMW absorption performance and obtain a reflection loss (RL) value of −32.53 dB at a matching thickness of 2.1 mm, while exhibiting an effective absorption bandwidth (EAB) of 4.1 GHz. Radar cross-sectional area (RCS) simulation shows that the potential of CoZn@NC/NiCo2S4 heterostructure in practical anti radar detection. This work puts up great potential for the development of advanced bimetallic sulfides-based EMW absorbers.

Reduced Graphene Oxide Modified Nitrogen-Doped Chitosan Carbon Fiber with Excellent Electromagnetic Wave Absorbing Performance.

Lightweight and low-cost one-dimensional carbon materials, especially biomass carbon fibers with multiple porous structures, have received wide attention in the field of electromagnetic wave absorption. In this paper, graphene-coated N-doped porous carbon nanofibers (PCNF) with excellent wave absorption properties were successfully synthesized via electrostatic spinning, electrostatic self-assembly, and high-temperature carbonization. The obtained results showed that the minimum reflection loss of the absorbing carbon fiber obtained under the carbonization condition of 800 °C is -51.047 dB, and the absorption bandwidth of reflection loss below -20 dB is 10.16 GHz. This work shows that carbonization temperature and filler content have a certain effect on the wave-absorbing properties of fiber, graphene with nanofiber, and the design and preparation of high-performance absorbing materials by combining the characteristics of graphene and nanofibers and multi-component coupling to provide new ideas for the research of absorbing materials.

Hollow core–shell Co@SiO2@PPy composites with efficient electromagnetic wave absorption

In this study, hollow Co@SiO2@PPy composites with excellent electromagnetic wave (EMW) absorption performance were successfully synthesized. The monodisperse hollow Co microspheres were prepared using a solvent-thermal method. The microspheres were then coated with an SiO2 layer by a modified Stöber method. Finally, the SiO2 layer was surface-coated by polypyrrole (PPy) through in-situ polymerization to obtain Co@SiO2@PPy composite materials with hollow core–shell structures. The prepared CSP2 composite achieved a minimum reflection loss (RLmin) of −65.83 dB at 1.86 mm, demonstrating an effective absorption bandwidth (EAB) of 4.84 GHz. The CSP3 composite achieved a widest EAB (EABmax) of 5.4 GHz at a thickness of 1.83 mm, while simultaneously maintaining the RL level at −50.70 dB. Additionally, it demonstrated an RLmin value of −61.66 dB with a thickness as thin as 1.66 mm. The observed shift of FTIR absorption peaks by 20 cm−1 in the PPy ring provides compelling evidence for the involvement of multilayered structures in polarization loss. The SiO2 layer not only enhances the interface polarization but also prevents corrosion of the Co core by acidic solutions. The exceptional EMW absorption characteristics can be attributed to the effective impedance matching and the combined effect of magnetic and dielectric losses.

Facile preparation of ZIF-8/ZIF-67-derived biomass carbon composites for highly efficient electromagnetic wave absorption

Biomass absorbing materials have received increasing attention for electromagnetic wave (EMW) absorption field absorbing materials due to its low density and high dielectric loss. However, the biomass EMW absorbing materials often suffer from the insufficient magnetic loss and impedance matching. In this work, a facile ZIF-8/ZIF-67-derived biomass composites (CoZnO@BPC) was prepared for high-performance EMW absorption based on multi-component micro, nano structures metal particles and xanthoce sorbifolia bunge shells-derived biomass porous carbon (BPC). The dielectric loss and/or magnetic loss abilities of CoZnO@BPC composites were adjusted by changing the mass ratio of Zn2+ to Co2+ ions. Under the filled amount of 20 wt%, CoZnO@BPC exhibited excellent EMW absorption with the minimum reflection loss (RL) at 15.84 GHz is -50.2 dB, and the matching thickness is only 1.7 mm. By adjusting the ZIFs mass ratio, the effective absorption bandwidth (EAB) can be up to 5.92 GHz (from 12.08 GHz to 18 GHz), and the matching thickness is only 1.9 mm. The results provide a new insight for the economical and efficient preparation of lightweight and advanced microwave absorbing materials.

The Ag based composites derived from Ag-MOFs with tunable forms for electromagnetic wave absorption

The wireless communication and network technology make our lives more and more convenient. However, the inevitable electromagnetic pollution and interference deriving from these technologies have hazardous influences on the electronic equipment and human health. Therefore, continuous explorations have been strived to fabricate excellent electromagnetic wave (EMW) absorbers to diminish the impact of these negative effects. MOF, as an emerging hybrid material is widely investigated as the EMW absorber due to its multiple attenuation mechanisms. However, attentions are always focused on the influence of different inorganic ions and organic linkers on the electromagnetic wave absorption (EMWA) performance of MOF. Significantly, tremendous facts have proved that the control of morphologies and forms of hybrid materials is vital for further enhancement of many applications. Hence, the investigation of effect of MOF forms on EMWA performance will be the important foundation for further explorations. Here, three different forms of Ag based MOFs, named Ag-MOF, Ag-MOF-Microcrystal and Ag-MOG were successfully fabricated. Further investigations of XPS, XRD as well as FT-IR manifested that these three materials had the same coordination behaviors. The different forms could be obtained by the controlling of crystallization. Ag-MOG was proved to be the best EMW absorber among the fabricated materials. The minimum RL of −41.8 dB and a wider EAB of 6.3 GHz could be obtained by Ag-MOG derived composite.

Abundant vacancies induced high polarization-attenuation effects in flower-like WS2 microwave absorbers

Defect engineering could provide new ideas for the design of transition metal disulfide electromagnetic wave (EMW) absorbers with high performance. Since the effects of dipoles on impedance matching and EMW absorption are crucial for the development of novel absorbers, the polarization attenuation dependence on defect engineering should be understood at micro- and macro-scales. In this paper, it is found that the defect-rich WS2 nanoflowers synthesized by the cold plasma method possess excellent EMW absorption properties. Cold plasma treatment of materials is easy to perform and maintains the original shape of the material to a high degree. The formation of defects results in abundant electrochemically active sites, increased multiple reflection losses, improved dielectric properties and impedance matching in the materials. The RLmin of the defect-rich material with a thickness of 3.19 mm is as high as −54.36 dB at 8.16 GHz, and the effective absorption bandwidth is 4.72 GHz. The results reveal that the formation of defective vacancies enhances the effects of dipole polarization of the material on improving its EMW absorption properties. Thus, this work provides not only a facile preparation route for novel EMW-absorbing materials, but also a new strategy for tunning defects in transition metal disulfides.

Carbon microspheres/carbon sheets as efficient electromagnetic wave absorbers

To address the issue of weak absorption intensity and narrow frequency band in pure dielectric electromagnetic wave (EMW) absorbing materials, this study adopts a simple method to successfully prepare a pure dielectric EMW absorption material by modifying acrylonitrile–methylmethacrylate copolymer carbon microspheres (co-AN-MMA@CS) with capsaicin-like 3,5-dimethylphenol derivative (DMPD). The introduction of DMPD into the carbon microspheres increases the heteroatoms (N, O) in the carbon material, thus resulting in functional groups (-C-N, –NO, and C–O) that enable energy loss through dipole polarization. Additionally, the special morphology of carbon microspheres attached or embedded in carbon sheets derived from DMPD increases the inhomogeneous interfaces, thereby increasing the interface polarization relaxation and further attenuating EMWs. The resulting carbon material with the optimal structure (denoted as CNO-2) exhibits superior EMW absorption properties. At a thickness of 2.50 mm, the minimum reflection loss (RLmin) reaches −63.10 dB at 13.14 GHz, whereas the maximum effective absorption bandwidth (EABmax) reaches 6.81 GHz (8.95–15.76 GHz). CNO-2 has excellent EMW absorption capabilities due to the controllable complex dielectric constant and multiple attenuation mechanisms, including interfacial polarization, dipole polarization, and conduction loss. The CNO absorbers prepared in this study can be used as efficient microwave absorbers for electromagnetic protection applications.

Fabrication of multifunctional composite nanofibrous membranes for antibacterial, waterproof, and broad-range microwave absorption properties

The scientific community has shown great interest in high-performance multifunctional nanomembranes due to their increasing demand. Nevertheless, the development of multifunctional composite nanofibrous membranes faces a limitation in achieving consistent and optimal performance with balancing conflicting requirements across multiple functionalities. However, addressing this challenge, a single composite nanofibers membrane has been successfully fabricated, demonstrating effective antibacterial activity, waterproofing properties, and excellent electromagnetic (EM) wave absorption. The multifunction composite nanofibers (CNFs0.6-Co@Fe3) exhibited remarkable microwave absorption performance, with a reflection loss (RL) of 29.10 dB at 15–20 GHz and a thickness of 1.5 mm. Additionally, the nanocomposite displayed flexibility, hydrophobicity with a water contact angle larger than 95° and low surface energy, and significant antibacterial properties against Escherichia coli (E. coli). These multifunctional nanocomposites offer a unique combination of outstanding EM wave absorption, cost-effective fabrication, environmental friendliness, and lightweight characteristics, holding great promise for future applications in nanocomposite products.

Fabrication of Metal–Organic Framework‐Derived LaCo/C‐Decorated Ti3C2Tx Composites with High Electromagnetic Wave Absorption

Thin‐thickness and lightweight electromagnetic wave (EMW) absorption materials are critically needed for stealth technology in the military stealth field. The special structure of a material is important for improving its good EMW absorption. Herein, a series of porous metal–organic framework‐derived LaCo/C‐decorated Ti3C2Tx (LaCo/C/Ti3C2Tx) composites are prepared by carbonization at high temperatures. Impressively, the minimum reflection loss of LaCo/C/Ti3C2Tx–2 is −47.72 dB at 10.26 GHz (thickness 2.3 mm), and the optimal effective absorption bandwidth is 5.45 GHz (thickness 1.9 mm). The excellent EMW absorption properties are due to multiple electromagnetic loss mechanisms, such as polarization loss, magnetic loss, and multiple reflections and scattering. This work provides a new route for the application of Ti3C2Tx‐based derivatives.

Enhancing Interface Connectivity for Multifunctional Magnetic Carbon Aerogels: An In Situ Growth Strategy of Metal-Organic Frameworks on Cellulose Nanofibrils.

Improving interface connectivity of magnetic nanoparticles in carbon aerogels is crucial, yet challenging for assembling lightweight, elastic, high-performance, and multifunctional carbon architectures. Here, an in situ growth strategy to achieve high dispersion of metal-organic frameworks (MOFs)-anchored cellulose nanofibrils to enhance the interface connection quality is proposed. Followed by a facile freeze-casting and carbonization treatment, sustainable biomimetic porous carbon aerogels with highly dispersed and closely connected MOF-derived magnetic nano-capsules are fabricated. Thanks to the tight interface bonding of nano-capsule microstructure, these aerogels showcase remarkable mechanical robustness and flexibility, tunable electrical conductivity and magnetization intensity, and excellent electromagnetic wave absorption performance. Achieving a reflection loss of -70.8dB and a broadened effective absorption bandwidth of 6.0GHz at a filling fraction of merely 2.2wt.%, leading to a specific reflection loss of -1450dBmm-1, surpassing all carbon-based aerogel absorbers so far reported. Meanwhile, the aerogel manifests high magnetic sensing sensibility and excellent thermal insulation. This work provides an extendable in situ growth strategy for synthesizing MOF-modified cellulose nanofibril structures, thereby promoting the development of high-value-added multifunctional magnetic carbon aerogels for applications in electromagnetic compatibility and protection, thermal management, diversified sensing, Internet of Things devices, and aerospace.

Multi-interfaced Ni/C@RGO/PTFE composites for electromagnetic protection applications with high environmental stability and durability

To efficiently address the growing electromagnetic pollution problem, it is urgently required to research high-performance electromagnetic materials that can effectively absorb or shield electromagnetic waves. In addition, the stability and durability of electromagnetic materials in complex practical environments is also an issue that needs to be noticed. Therefore, the starting point for our problem-solving is how to endow magnetic/dielectric multi-interfaced composite materials with excellent electromagnetic protection capability and environmental stability. In this study, magnetic/dielectric multi-interfaced Ni/carbon@reduced graphene oxide/polytetrafluoroethylene (Ni/C@RGO/PTFE) composites were developed to utilize as excellent EWA (electromagnetic wave absorption) and EMI (electromagnetic interference) shielding materials. Due to their diverse heterogeneous interfaces, rich conductive networks, and multiple loss mechanisms, the Ni/C@RGO/PTFE composite exhibits an optimal reflection loss of −61.48 dB and an effective absorption bandwidth of 7.20 GHz, with a filler loading of 5 wt%. Furthermore, Ni/C@RGO/PTFE composite films have an optimal absorption effectiveness value of 9.50 dB and an absorption coefficient of 0.49. Moreover, Ni/C@RGO/PTFE can hold high EWA performance in various corrosive media and maintain more than 90% of EMI shielding effectiveness, which can be attributed to the carbon coating and PTFE matrix acting as dual protective barriers for the susceptible metal Ni, thus obviously improving the stability and durability of composites. Overall, this work presents an effective strategy for the growth of high-performance EWA and EMI shielding materials with outstanding environmental stability and durability, which have wide application prospects in the future.