Excellent Adsorption Performance Research Articles

Ball milling boosted magnetic cotton husk-derived biochar adsorptive removal of oxytetracycline and ciprofloxacin from water

Oxytetracycline (OTC) and ciprofloxacin (CIP) contamination have caused serious risks to human health, and modified biochar is considered as a potential adsorbent for their removal. The typical agricultural waste of cotton husk was used as the feedstock, then was combined with γ-Fe2O3 and ball milling to innovatively synthesize nano zero-valent iron (nZVI) supporting magnetic cotton hush-derived biochar (Fe2O3@BMBC) by reductive calcination. Fe2O3@BMBC performed excellent adsorption performance with a maximum adsorption capacity for OTC (266.7 mg·g−1) and CIP (83.36 mg·g−1), and its adsorption capacity was 1.6 and 2.3 times that of cotton husk biochar (BC). Characterization analysis showed that Fe2O3@BMBC contained abundant oxygenated functional groups (e.g., -OH, C = O and Fe–O) and its surface was covered by diverse iron oxides. The high magnetization sensitivity of Fe2O3@BMBC guaranteed that it was easily to be separated by a magnet. Oxygenated functional groups (e.g., -OH, C = O and Fe–O) participated in the adsorption process, and solution pH significantly affected the adsorption behaviour, and pseudo-second-order model and Freundlich model better fitting the kinetics and isotherms data. These results confirmed that π-π conjugation, H-bonding, Fe–O complexation and electrostatic interactions contributed to the greater adsorption capacity of Fe2O3@BMBC. Ethanol + ultrasound could efficiently regenerate the used Fe2O3@BMBC and maintain its sustainable adsorption performance for OTC and CIP. Additionally, Fe2O3@BMBC performed a good environmental security in a wide pH range (from 3 to 11) in view of the low leaching risk of Fe.Graphical

Preparation of β-cyclodextrin-reduced graphene oxide aerogel and its application for adsorption of herbicides

Herbicides are the primary pesticides that can easily pollute water bodies, attracting significant attention from researchers regarding the effective removal of herbicide residues from the water environment. In this study, a β-cyclodextrin-reduced graphene oxide (β-CD-BTCA-rGO) aerogel was prepared following the self-assembly hydrothermal method using 1,2,3,4-butane tetracarboxylic acid (BTCA) as crosslinkers. The self-assembly process involved the cross-linking of “soft” β-cyclodextrin (β-CD) with “hard” graphene oxide (GO) nanosheets, forming a stable β-CD-BTCA-rGO aerogel. The prepared β-CD-BTCA-rGO aerogel demonstrated excellent adsorption performance. The adsorption capacities were 62.3 and 46.8 mg/g for sulfentrazone and quinclorac, respectively, surpassing the traditional reduced graphene oxide (rGO) aerogel and citric acid cross-linked (β-CD-CA-rGO) aerogel. Correspondingly, its adsorption capacity for quinclorac was 1.8 times and 12 times that of rGO aerogel and β-CD-CA-rGO aerogel, respectively. Quantum chemical calculations at the density functional theory (DFT) level, utilizing the Fukui function to predict chemical reaction sites, indicated that BTCA, as crosslinkers, formed stable chemical bonds (ester bonds) with GO through hydroxyl and carboxyl surface functional groups, leading to the formation of stable porous aerogels. Furthermore, the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap was quantitatively measured for various adsorption mechanisms, revealing that electrostatic adsorption was the main force of the adsorption on the aerogels. The β-CD-BTCA-rGO aerogels prepared in this study demonstrated economic feasibility as adsorbents and exhibited good reproducibility. Consequently, β-CD-BTCA-rGO aerogels hold promising application prospects in the remediation of pesticide pollution in water systems.

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

ABSTRACT Carbon capture and storage (CCS) is crucial in mitigating greenhouse gas emissions. Solid adsorbents, notable for their reusability and corrosion resistance, are gaining attention in CO2 gas separation. This study uses Silica fume as an adsorbent and silica source for SiO2 and MCM-41 silica-based adsorbents. Silica was extracted via an alkaline dissolution method, and adsorbents were synthesized using a CO2-induced precipitation method, chosen for its shorter synthesis time and CO2 utilization. The effects of pore volume, average pore diameter, and specific surface area on amine loading and CO2 adsorption capacity were investigated using CTAB surfactant in SiO2 synthesis, resulting in MCM-41. The synthesized adsorbents were modified with TEPA and DEA amines due to their high affinity for CO2. After determining optimal amine loading, the impact of combining TEPA with DEA was examined. The highest CO2 adsorption capacity under simulated flue gas conditions (15% volume CO2 and 85% volume N2) was 198 milligrams per gram of adsorbent for the SiO2 adsorbent functionalized with 50% by weight amine (28% TEPA and 22% DEA). Variations in CO2 adsorption over time, the influence of adsorbent quantity on adsorption capacity, the affinity of the adsorbent for N2 adsorption, and the adsorption–desorption cycle were investigated. The 28%TEPA-22%DEA-SiO2 adsorbent emerged as the optimal choice due to its large total volume and average pore diameter, absence of a template in its structure, excellent performance in CO2 adsorption, lack of affinity for N2, and robust adsorption–desorption stability.

Synthesis of 4A Zeolite Molecular Sieves by Modifying Fly Ash with Water Treatment Residue to Remove Ammonia Nitrogen from Water

The widespread presence of ammonia nitrogen (NH4+–N) pollutants poses a serious threat to water environment health. In this study, a novel zeolite (WTR–CFA zeolite) with excellent adsorption performance is synthesized using CFA as the raw material and water treatment residue (WTR) as the aluminum source through an ultrasonic–assisted alkali melt hydrothermal method. Compared with traditional CFA–zeolite, WTR–CFA zeolite only generates 4A zeolite with a single crystal phase, and the peak shape is sharp, which results in better crystallization. WTR–CFA zeolite perfectly solves the technical problems of the low utilization rate and poor controllability of the crystal form in traditional artificially synthesized zeolites. The maximum NH4+–N adsorption capacity of WTR–CFA zeolite is 29.80 mg/g, which is higher than that of most adsorbents reported in previous studies. After five cycles of adsorption regeneration, the regeneration efficiency of WTR–CFA zeolite only decreased from 98.84% to 97.12%, which demonstrates excellent environmental value. The adsorption isotherms and kinetics of NH4+–N conform to the Langmuir model and quasi–second order kinetic model, respectively, which indicates that ion–exchange–dominant chemical adsorption plays a major role in the adsorption mechanism. In summary, this study combines the use of CFA and WTR resources with the treatment of aquatic pollution to reduce material synthesis costs, control the crystal structure of WTR–CFA zeolite, and increase adsorption capacity. This approach achieves the goals of “waste treatment and turning waste into treasure”.

Extended MOF-74-Type Variant with an Azine Linkage: Efficient Direct Air Capture and One-Pot Synthesis.

Direct air capture (DAC) shows considerable promise for the effective removal of CO2; however, materials applicable to DAC are lacking. Among metal-organic framework (MOF) adsorbents, diamine-Mg2(dobpdc) (dobpdc4- = 4,4-dioxidobiphenyl-3,3'-dicarboxylate) effectively removes low-pressure CO2, but the synthesis of the organic ligand requires high temperature, high pressure, and a toxic solvent. Besides, it is necessary to isolate the ligand for utilization in the synthesis of the framework. In this study, we synthesized a new variant of extended MOF-74-type frameworks, M2(hob) (M = Mg2+, Co2+, Ni2+, and Zn2+; hob4- = 5,5'-(hydrazine-1,2-diylidenebis(methanylylidene))bis(2-oxidobenzoate)), constructed from an azine-bonded organic ligand obtained through a facile condensation reaction at room temperature. Functionalization of Mg2(hob) with N-methylethylenediamine, N-ethylethylenediamine, and N,N'-dimethylethylenediamine (mmen) enables strong interactions with low-pressure CO2, resulting in top-tier adsorption capacities of 2.60, 2.49, and 2.91 mmol g-1 at 400 ppm of CO2, respectively. Under humid conditions, the CO2 capacity was higher than under dry conditions due to the presence of water molecules that aid in the formation of bicarbonate species. A composite material combining mmen-Mg2(hob) and polyvinylidene fluoride, a hydrophobic polymer, retained its excellent adsorption performance even after 7 days of exposure to 40% relative humidity. In addition, the one-pot synthesis of Mg2(hob) from a mixture of the corresponding monomers is achieved without separate ligand synthesis steps; thus, this framework is suitable for facile large-scale production. This work underscores that the newly synthesized Mg2(hob) and its composites demonstrate significant potential for DAC applications.

Porous β-cyclodextrin polymers for rapid and efficient removal of organic micropollutants from water: The role of sulfonation and porosity on adsorption performance

Removal of organic micropollutants (OMPs) from water, especially hydrophilic and ionized ones, is challenging for water remediation. Herein, porous β-cyclodextrin polymers (PCPs) with tailored functionalization were prepared based on molecular expansion strategy and sulfonation. Partially benzylated β-cyclodextrin was knotted by external crosslinker to form PCP1, and knotting PCP1 by expansion molecule generated PCP2. PCP1 and PCP2 were sulfonated to achieve PCP1–SO3H and PCP2–SO3H. Based on systematical adsorption evaluation toward multiple categories of OMPs, it was found that the introduced strong polar –SO3H group could bring strong hydrogen bonding and electrostatic interactions. PCP2 showed the highest surface (998.97 m2/g) displayed more excellent adsorption performance toward neutral and anionic OMPs, and the adsorption mechanism for this property of PCP2 was dominated by hydrophobic interactions. In addition, the PCP1–SO3H with the lowest surface area (39.75 m2/g) rather than PCP2–SO3H with higher surface (519.28 m2/g) exhibited more superior adsorption towards hydrophilic and cationic OMPs, benefiting by hydrogen bonding and electrostatic interactions as well as appropriate porosity. These results not only confirmed the performance enhancement of PCPs through the integration of novel preparation strategy, but also provided fundamental guidance for PCPs design for water remediation.

Interface Modulation of 2D Superlattice Heterostructures with Oxygen-enriched Sites and Dissolution Restraint for Effective Rare-earth Elements Extraction

Effective recovery of rare earth elements from wastewater is crucial for the modern industry, as well as for protecting the human health and ecosystem. Nevertheless, it is still challenging to realize efficient and selective low-concentration rare earth extraction in systems containing high levels competing metal ions. Here, we report on the fabrication of two-dimensional superlattice heterostructures (VOGO-x) through the alternating restacking of VOPO4 nanosheets and GO-PDDA nanosheets via electrostatic self-assembly. The meticulously organized molecular scale of superlattice heterostructures enable the full exposure of accessible adsorption sites and facilitate the transport of rare earth ions, meanwhile the abundant oxygen-containing phosphate groups within the interlayer can realize selective rare earth ions extraction. Furthermore, the tunable interlayer interaction can promote structure stability to prevent dissolution. Consequently, VOGO-11 possesses excellent rare earth adsorption performance, with a saturated adsorption capacity (Nd(III) 631.52 mg/g, Dy(III) 689.48 mg/g, Lu(III) 716.06 mg/g), high utilization rate of adsorption sites and short adsorption equilibrium time of simply 10 min in the REE aqueous solution. Furthermore, VOGO-11 exhibits outstanding selective rare earth adsorption ability over a wide range of metal ions in the low-concentration simulated wastewater and actual leaching tailings. These results demonstrate the material’s promising potential in capturing rare earth ions and pave the way to the development of two-dimensional superlattice heterostructures through interface modulation for effective rare earth extraction.

Study on the adsorption performance of fly ash loaded on nano-FeS for chromium-containing wastewater treatment

In view of the problems caused by chromium-containing wastewater, such as environmental pollution, biological toxicity, and human health risks. Based on fly ash adsorption and nano-FeS reduction characteristics, fly ash loaded nano-FeS composite (nFeS-FA) was synthesized using mineral supported modification technology and ultrasonic precipitation method. The effect of adsorbent dosage, initial pH, contact time, and initial concentration of the solution on the adsorption of Cr(VI) and total Cr by nFeS-FA was investigated. The characteristics of Cr(VI) and total Cr adsorption by nFeS-FA were studied using adsorption isotherms, adsorption kinetics principles, as well as XRD, TEM, SEM-EDS, and BET analysis. The results demonstrated that under the conditions of nFeS-FA of 8 g/L, initial pH of 4, contact time of 150 min, and initial concentration of the solution at 100 mg/L, nFeS-FA achieved removal efficiency of 87.85 % for Cr(VI) and 71.77 % for total Cr. The adsorption of Cr(VI) and total Cr by nFeS-FA followed the Langmuir model and pseudo-second-order kinetic model, indicating monolayer adsorption with chemical adsorption as the dominant mechanism. XRD, TEM, SEM-EDS, and BET revealed that the flaky nano-FeS was uniformly distributed on the surface of fly ash, exhibiting good dispersion and thereby increasing the specific surface area. During the adsorption experiments, nFeS-FA reacted with Cr(VI), and the generated Fe3+ mainly existed as FeOOH precipitation, while S2− reacted with Cr(III) to produce Cr2S3 precipitation. Therefore, nFeS-FA exhibited excellent adsorption performance towards Cr(VI) and total Cr. It can serve as a technological reference for the remediation of heavy metal chromium pollution in the field of water treatment.

In situ growth of HKUST-1 on electrospun polyacrylonitrile nanofibers/regenerated cellulose aerogel for efficient methylene blue adsorption

Dyes, as organic pollutants, are causing increasingly severe environmental problems. Metal-organic frameworks (MOFs) are considered promising dye adsorbents; however, their application is limited due to their powder or solid particle forms and limited reusability. Therefore, this study proposes an innovative approach to develop a novel MOF-based composite aerogel, specifically a HKUST-1/polyacrylonitrile nanofibers/regenerated cellulose (HKUST-1/PANNs/RC) composite aerogel adsorbent, for the adsorption of pollutants in water. This adsorbent was successfully prepared using a simple method combining covalent crosslinking, quick freezing, freeze-drying, in-situ growth synthesis, and solvothermal techniques. The HKUST-1/PANNs/RC composite aerogel exhibits a significantly large specific surface area, which is approximately 64 times greater than that of PANNs/RC (10.45 m2·g−1), with a specific surface area of 669.9 m2·g−1. The PANNs serve as a support framework, imparting excellent mechanical properties to the composite aerogel, enhancing its overall stability and recoverability. Additionally, the composite aerogel contains numerous -COOH and -OH groups on its surface, providing strong acid resistance and facilitating interactions with pollutant molecules through electrostatic interactions, π-π conjugation, n-π* interactions, and hydrogen bonding, thereby promoting the adsorption process. Using methylene blue (MB) as a probe molecule, the study results demonstrate that the HKUST-1/PANNs/RC composite aerogel has an adsorption capacity of 522.01 mg·g−1 for MB (25 h), exhibiting excellent adsorption performance. This composite aerogel shows great potential for application in water pollution control.

Adaptive tetralactam macrocycle based polymers for efficient and rapid removal of organic micropollutants with wide scope

With the rapid urbanization and industrialization of human society, water pollution issues caused by the increasing types and quantities of organic micropollutants have become increasingly severe. It is very urgent but also challenging to develop the rapid and efficient method for water purification with a wide removal scope. Herein, a cross-linked polymer adsorbent was fabricated by adaptive tetralactam macrocycle for rapid and efficient removal of multiple types of organic micropollutants in water, including dyes, pharmaceuticals, pesticides, and hormones. The removal efficiencies for the 20 tested organic micropollutants with diverse structures, sizes, and charges are all larger than 95.9 % and approaching 99.9 %, and most of the adsorption processes were finished within 5 min. The well-preorganized and adaptive cavity of tetralactam macrocycle endows the polymer adsorbent with excellent adsorption performance even in extreme conditions. Moreover, the tetralactam macrocycle-crosslinked polymer adsorbent could be regenerated easily and the performance was maintained after 6 cycles. It is demonstrated that the as-developed polymer has great potential in the removal of various hazardous organic pollutants in water.

Recent Progress on the Adsorption of Heavy Metal Ions Pb(II) and Cu(II) from Wastewater.

With the processes of industrialization and urbanization, heavy metal ion pollution has become a thorny problem in water systems. Among the various technologies developed for the removal of heavy metal ions, the adsorption method is widely studied by researchers and various nanomaterials with good adsorption performances have been prepared during the past decades. In this paper, a variety of novel nanomaterials with excellent adsorption performances for Pb(II) and Cu(II) reported in recent years are reviewed, such as carbon-based materials, clay mineral materials, zero-valent iron and their derivatives, MOFs, nanocomposites, etc. The novel nanomaterials with extremely high adsorption capacity, selectivity and particular nanostructures are summarized and introduced, along with their advantages and disadvantages. And, some future research priorities for the treatment of wastewater are also prospected.

Efficient removal of phosphate and fluoride from phosphogypsum leachate by lanthanum-modified zeolite: Synchronous adsorption behavior and mechanism

Phosphogypsum is a common large-tonnage by–product in phosphorous chemicals industry, its stacking not only causes severe environmental problems, but also leads to a serious waste of phosphate and fluoride resources. The objective of this study was to tackle the recycling treatment of phosphogypsum leachate by using a highly efficient adsorbent lanthanum hydroxide-modified zeolite (LMZ). The adsorption behaviors of phosphate and fluoride by LMZ in the coexisting system under static and dynamic conditions were studied. And further, the competitive adsorption mechanism involved was analyzed. The results showed that LMZ possessed excellent adsorption performance toward both phosphate and fluoride in the single system, but the fluoride adsorption capacity decreased by 57.9 % in the coexisting system, with no change in phosphate adsorption. In the competitive adsorption process, ligand exchange interaction on La active sites contributed most to phosphate adsorption, while fluoride could be adsorbed onto LMZ via electrostatic attraction, surface precipitation with Al sites, and hydrogen bonds with hydroxyl groups in La−OH and P−OH. In actual phosphogypsum leachate, the removal of phosphate had priority over the removal of fluorine. Under continuous adsorption condition, the concentration of phosphorus and fluoride could be decreased to below 0.5 and 1.0 mg/L, respectively, meeting the safe concentration in drinking water. This study promotes the application of La–based adsorbents in the treatment of phosphogypsum leachate, and provides a green and sustainable strategy toward practical phosphorus and fluorine recovery.

All-in-One Electrokinetic Strategy Coupled with a Miniaturized Chip for SERS Detection of Multipesticides.

Complexed and tiresome pretreatment processes have significantly impeded in-field analysis of environmental specimens. Herein, an all-in-one sample separation and enrichment strategy based on a compact charge-selective capture/nanoconfined enrichment (CSC/NCE) device is exploited for marker-free surface-enhanced Raman spectroscopy (SERS) detection of charged pesticides in matrix specimens. This tactic incorporating in situ separations, seizing, and nanoconfined enhancement can greatly elevate the effectiveness of sample pretreatment. Importantly, CSC/NCE with excellent adsorption performances and excellent plasmonic features facilitates concentration and signal amplification of electrically charged pesticides. With the introduction of an electric field on this integrated CSC/NCE, the matrix effect in samples could be significantly eradicated, and a distinct SERS response is witnessed for targeted analytes. Accurate quantification of multipesticides is achieved by synergizing the CSC/NCE chip and chemometrics, and the contents found by the CSC/NCE-based sensing strategy agree with those obtained from chromatography assays with relative deviations lower than 10%. The facile and versatile all-in-one tactic infused in a compact chip exhibits enormous potential for field-test application in chemical measurement and food safety.

Construction of phosphatase-like COF-OMe@Valine-CeO2 nanozymes for ultrasensitive electrochemical detection of organophosphorus pesticides

Construction of highly-active artificial nanozymes for pesticides detection has great significance of human health and ecological systems. Herein, we have successfully designed a two-step approach to synthesize the TAPB-DMTP-COF (hereafter denoted as COF-OMe, TAPB, 1,3,5-tris(4-aminophenyl)benzene; DMTP, 2,5-dimethoxyterephaldehyde; COF, covalent organic framework)@Valine integrated cerium oxide nanozymes (COF-OMe@Valine-CeO2) with phosphatase-like activities, which can cleave phosphate bonds (PO) of organophosphorus pesticides (OPs) for the formation of electroactive p-nitrophenol (p-NP). In detail, the Ce (IV)/Ce (III) species serve as the active sites to polarize and hydrolyze PO bond in OPs, and the excellent adsorption performance of porous COF-OMe toward OPs could promote the hydrolysis process of PO. Moreover, the efficient charge transfer at the covalent interface of COF-OMe@Valine-CeO2 also contributed to this excellent catalytic process. By virtue of those advantages, the COF-OMe@Valine-CeO2 electrochemical platform was successfully applied in methyl-paraoxon (MP) detection. The resulting electrochemical sensors displayed high sensitivity, a wide linear response range of 0.034–76 μmol/L, and low detection limits of 0.011 μmol/L for MP. The research not only provides a preparation method for COF with excellent nanozyme activity, but broadens some new insights for the design of highly efficient nanozymes for on-time detection for OPs.

Effect of polyelectrolyte structure on perchlorate adsorption performance by functionalized montmorillonite

Polyelectrolyte (with different unit structure or molecular weight) modified montmorillonite (PMt) was synthesized for perchlorate (ClO4-) removal. It was found polyelectrolytes were successfully loaded on montmorillonite (Mt), and the surface potential of most PMt changed from negative to positive. Polyelectrolyte desorption on Mt was < 10 % after 48 h. Poly(diallyldimethylammonium chloride) species modified montmorillonite (PDDAx-Mt) showed excellent adsorption performance for ClO4- with maximum adsorption amount over 2.78 mmol/g and equilibrium time within 10 min. The adsorption performance of PMt toward ClO4- followed this order: PDDAx-Mt > CH-Mt > PAM-Mt > PQ28-Mt. Moreover, PDDAx-Mt and CH-Mt showed a superior adsorption selectivity to ClO4- among competitive oxyanions in the quaternary-adsorbate system (ClO4- > PO43- > SO42- > NO3–). The enhanced ClO4- adsorption could be mainly attributed to the presence of anion exchange sites (−R4N+-Cl− or –NH3+-Cl−) provided by PDDA or CH, followed by electrostatic gravitation and weak hydrogen bonding interaction. Density functional theory (DFT) calculation revealed that ClO4- adsorbed on PMt is a process of electrons transferring from O atoms in ClO4- to H atoms on C in PDDA+ or N in CH+, PAM+ and PQ28+. The preparation method of PMt is simple with excellent adsorption performance and selectivity toward ClO4-, suggesting promising applications in anion wastewater treatment.

Linker-induced hollow MOF embedded into arginine-modified montmorillonite for efficient urea removal: Adsorption behavior and mechanism analysis

The precise regulation of hollow metal–organic framework (HMOF) and the effective assembly with excellent guest materials present limitless potential for pollutant removal. In this work, the arginine-modified montmorillonite (AMMT) was preferentially prepared via room temperature impregnation approach, and then the AMMT-HMOF composite was effectively constructed through a one-pot method. During this process, linker-induced MOF to MOF route was proposed, i.e., solid ZIF-67 transformed into hollow MOF-74 (thicknesses: ∼25 nm). Of note, this route involves the transition from solid to hollow structures, as well as the change between different topologies. Next, the AMMT-HMOF composite was evaluated for adsorption experiments with urea in aqueous solution as the target molecule. Further speaking, the optimization experiments were conducted to analyze the impact of pH, contact time, adsorbent mass and original urea concentration towards the adsorption process. The as-fabricated absorbent presented a maximum adsorption capacity of 298.5 mg/g within 1 h, demonstrating adherence to pseudo-second-order kinetics and the Langmuir model. The excellent adsorption performance can be ascribed to the enlarged layer spacing of AMMT, as well as the fast mass transport and abundant diffusion channels in HMOF. Additionally, the mechanistic analyses revealed the existence of hydrogen bonding interactions between the adsorbent and urea. Meanwhile, the adsorbent displayed the outstanding morphological and structural stability after usage. According to our survey, this is the first time to use this linker-induced MOF-to-MOF strategy and predictably assemble with functionalized montmorillonite to construct the hollow MOF composite for urea adsorption.

A self-driven Ni(OH)2/CB/PVDF film for highly efficient adsorption of tungsten via hydroxyl ligand exchange

A nickel hydroxide/carbon black/polyvinylidene fluoride (Ni(OH)2/CB/PVDF) film was coated on a graphite plate substrate and used for the selective and efficient extraction of W(VI) using self-driven film adsorption. The excellent self-driven adsorption performance of Ni(OH)2/CB/PVDF film for W(VI) was demonstrated by the comparison of the experimental performance of film adsorption and electrochemically switched ion exchange (ESIX) process. In the Ni(OH)2/CB/PVDF film, the adsorption of W(VI) by Ni(OH)2 was achieved through the ligand exchange reaction with W(VI) and abundant hydroxyl groups, which ensured the self-driven performance. The adsorption capacity of the self-driven Ni(OH)2/CB/PVDF film for W(VI) under neutral conditions could reach up to 37.53 mg·g−1 after 12 h. Moreover, the adsorption kinetics and adsorption thermodynamics showed that the adsorption of W(VI) on Ni(OH)2/CB/PVDF films was more in line with the pseudo-second-order kinetic model, and the adsorption was heat-absorbing and spontaneous. After seven cycles of adsorption/desorption, the adsorption capacity of W(VI) by Ni(OH)2/CB/PVDF film could reach 79.37 % of its initial value, which showed good adsorption/desorption cycle performance. Moreover, Ni(OH)2/CB/PVDF films showed high selectivity for W(VI) when WO42− coexisted with Cl−, NO3–, and SO42−, respectively. This study confirmed that the self-driven Ni(OH)2/CB/PVDF film had efficient and stable adsorption performance for W(VI), which can be regarded as a promising method for the selective adsorption of W(VI) from aqueous solution.

Pore structure evolution and adsorption behaviors of porous poly (vinyl alcohol) hydrogel prepared using Na2SO4 and CaCO3 as porogens

AbstractIn this work, porous poly (vinyl alcohol) (PVA) hydrogels with different pore sizes were fabricated using inorganic non‐metallic porogens by an environmentally friendly method, providing a potential solution for the field of wastewater treatment. PVA hydrogels have gained much attention in the field of wastewater treatment due to their excellent adsorption performance and porous network structure. However, the employment of inorganic non‐metallic salts as porogens for PVA hydrogels has received limited attention so far. In this study, porous PVA hydrogels were prepared by freeze‐thawing and freeze‐drying with sodium sulfate (Na2SO4) and calcium carbonate (CaCO3) as porogens. PVA‐Na exhibited denser network structure with the concentration of Na2SO4 solution increased, and the tensile stress was enhanced by about 45 times. Meanwhile, the tensile stress of PVA‐Ca was improved significantly from 0.06 to 1.67 MPa, and the network structure became looser after adding CaCO3. Moreover, a comprehensive investigation was conducted on the adsorption performance of porous PVA hydrogel for Congo red (CR). Finally, five adsorption models were fitted to investigate the adsorption mechanism of porous PVA hydrogels, in which the maximum adsorption capacity of CR by PVA‐Na‐0.5 was predicted to be 215 mg/g by the Langmuir isothermal model fitting.Highlights The structure of PVA hydrogels was adjusted by Na2SO4 and CaCO3, respectively. The tensile stress of PVA‐Na with dense network structure increased 45 times. Compared to PVA‐FD, swelling equilibrium time of PVA‐Na reduced from 24 to 6 h. Equilibrium swelling rate of PVA‐Ca declined by half in comparison to PVA‐FD. Langmuir isothermal model predicted qmax of 215 mg/g for CR by PVA‐Na‐0.5.

Facile preparation of hollow covalent organic frameworks as superior and universal matrix clean-up micro-structures for high throughout determination of food hazards

The complicated food matrix seriously limits the one-time test for the potential food hazards in non-targeted analysis. Accordingly, developing advanced sample pretreatment strategy to reduce matrix effects is of great significance. Herein, newly-integrated hollow-structured covalent organic frameworks (HCOFs) with large internal adsorption capacity and target-matched pore size were synthesized via etching the core-shell structured COFs. The as-prepared HCOFs could be directly applied for matrix clean-up of vegetable samples, while further modification of polydopamine (PDA) network facilitated application for animal samples. Both HCOFs and HCOFs@PDA with the comparable sizes to the matrix interference gave excellent adsorption performance to targets, achieving satisfied recoveries (70%–120%) toward 90 pesticides and 44 veterinary drugs in one-test, respectively. This work showed the great potential of the facile-integrated HCOFs with high stability and customized size to remove interference matrix and offered a universal strategy to achieve simultaneous screening of hazards with considerable quantity in high-throughput non-targeted analysis.

Electroadsorption desalination performance of carbon materials derived from coconut shell without membrane separation

This study investigated coconut shells, an abundant and low-cost raw material, as the precursor for activated carbon preparation, and applied a carbonization activation method to prepare carbon materials under different activation conditions. The differences in the performance of biomass derived carbon materials as capacitive deionization (CDI) electrodes were studied under conditions of different activators, activator doses, and activation temperatures. Compared with commercial coconut shell activated carbon, studies have shown that biomass derived carbon electrodes obtained under the optimal preparation conditions of NaOH as the activator, a carbonizer to activator ratio of 1:3, and an activation temperature of 800 ℃ have an excellent electro adsorption performance and the potential to be used as a CDI electrode material. The salt adsorption capacity (SAC) of activated carbon made with coconut shell derived carbon materials after 20 min of electro adsorption reached a maximum of 11.47 mg/g. After 10 repeated uses, its SAC remained at the original 90.58%, demonstrating an excellent cycling stability.