Evaporation-induced Self-assembly Research Articles

Evaporation-induced self-assembled ultrathin AgNW networks for highly conformable wearable electronics

The flexibility and stability of transparent electrodes play a crucial role in the growing popularity of flexible devices, especially in potential wearable electronics. To date, various solution-coating techniques have been developed for fabricating silver nanowire (AgNW) flexible bioelectronics. However, achieving the orderly distributed patterns of AgNW without undesirable aggregations still poses a grand challenge. Here, an approach to realize regular patterned ultrathin AgNW networks on a freestanding electrospun PVDF-TrFE frame by evaporation-induced self-assembly is proposed. The patterning mechanism of evaporating AgNW colloidal suspension is investigated from experimental and theoretical analysis. The influence of evaporation-induced flow inside colloidal freestanding membranes on forming regular square hole-shaped arrays, selective deposition of AgNW, and aligning them along the artificial pinning array are addressed. Owing to the orderly arrangement of AgNW networks, the resultant flexible electrode achieves ultrathin thickness (about 5 μm), high optical transmittance (87.8%), and low sheet resistance (8.4 Ω·sq−1) with a relatively low dosage of AgNW (9 μg·cm−2). The electrode exhibits excellent durability during cyclic bending (50,000 times) and stretching (50% strain). The resistance remains virtually unchanged during 200 days in everyday environments. Furthermore, the excellent conformability and breathability of the flexible transparent electrode attached to the human skin demonstrates its potential application as an e-skin sensor. Our findings reliably urge a simple approach to underscore better outcomes with effective patterns by self-assembly of AgNW for highly conformal wearable electronics.

Tunable Construction of Chiral Nematic Cellulose Nanocrystals/ZnO Films for Ultra-Sensitive, Recyclable Sensing of Humidity and Ethanol.

The investigation of functional materials derived from sustainable and eco-friendly bioresources has generated significant attention. Herein, nanocomposite films based on chiral nematic cellulose crystals (CNCs) were developed by incorporating xylose and biocompatible ZnO nanoparticles (NPs) via evaporation-induced self-assembly (EISA). The nanocomposite films exhibited iridescent color changes that corresponded to the birefringence phenomenon under polarized light, which was attributed to the formation of cholesteric structures. ZnO nanoparticles were proved to successfully adjust the helical pitches of the chiral arrangements of the CNCs, resulting in tunable optical light with shifted wavelength bands. Furthermore, the nanocomposite films showed fast humidity and ethanol stimuli response properties, exhibiting the potential of stimuli sensors of the CNC-based sustainable materials.

Establishing superfine nanofibrils for robust polyelectrolyte artificial spider silk and powerful artificial muscles

Spider silk exhibits an excellent combination of high strength and toughness, which originates from the hierarchical self-assembled structure of spidroin during fiber spinning. In this work, superfine nanofibrils are established in polyelectrolyte artificial spider silk by optimizing the flexibility of polymer chains, which exhibits combination of breaking strength and toughness ranging from 1.83 GPa and 238 MJ m−3 to 0.53 GPa and 700 MJ m−3, respectively. This is achieved by introducing ions to control the dissociation of polymer chains and evaporation-induced self-assembly under external stress. In addition, the artificial spider silk possesses thermally-driven supercontraction ability. This work provides inspiration for the design of high-performance fiber materials.

Enhancing humidity sensing performance through structural and catalytic optimization in platinum-modified ordered mesoporous titania

Platinum modified ordered mesopore TiO2 (OMT:X Pt) with tunable channel was synthesized via soft-templet method known as Evaporation Induced Self-Assembly (EISA). Both porosity and metal doping have a significant impact on how metal oxide semiconductors respond to humidity. Thus, based on earlier studies, Pt-doped ordered mesoporous TiO2 was synthesized and described under optimal conditions. From nitrogen adsorption and desorption analysis, while it was found that the specific surface area decreased (from 240 to 125 m2/g), pore size increased (from 4 to13 nm). The humidity sensing performance of the Pt-modified OMT is investigated by dynamic sensing system. The sensor based on 5 wt% Pt-doped OMT showed high response (SR ∼ 105), fast response time (26 s) to 95 % relative humidity (RH) and good long-term stability (over 90 days). To understand and authenticate the sensing mechanism, the structure and morphology of synthesized Pt-doped OMT was performed by BET, SEM, HRTEM, XRD and XPS. Furthermore, a plausible sensing mechanism is discussed on basis of the obtained results.

Iridescent transparent passive radiative cooling enabled by cellulose nanocrystal assemblies

Recently, passive daytime radiative cooling (PDRC) materials that reflect sunlight and transmit heat through atmospheric transparent windows to outer space without any energy consumption have attracted broad interest. However, most PDRC materials have the complicated structures, white or mirror-like appearance with poor transparency. Here, we reported a transparent iridescent PDRC coating material constructed by the evaporation-induced self-assembly (EISA) of cellulose nanocrystals (CNCs). The iridescent PDRC coating not only shows high light transparency (75 %) because the right-handed circularly polarized light can transmit the unique left-handed chiral nematic liquid crystal structure, but also shows high solar reflection efficiency (95.2 %) and infrared emission efficiency (96.5 %) that endows the coating with high radiative cooling efficiency (119 W/m2). More importantly, the PDRC coating can apply on polymethyl methacrylate (PMMA), polyethylene terephthalate (PET) film and textiles, and the substrate color has no negative impact for cooling. With the excellent radiative cooling efficiency, high transparency, facile preparation process and general applicability, the CNCs-based PDRC coating opens a new pathway toward the potential application of PDRC for environmental sustainability purpose.

Hydrogenolysis of glycerol without external H2 over Nb-doped Ni catalysts supported on ordered mesoporous alumina

The correlation between the physico-chemical properties of Nb-doped nickel supported on ordered mesoporous alumina catalysts and product distribution during hydrogenolysis of glycerol with in situ produced hydrogen in continuous was investigated. The synthesis of alumina was carried out by the evaporation induced self-assembly (EISA) method. To achieve different interaction strengths among Ni, Nb and Al, the catalysts were prepared by co-impregnation of Ni and Nb on alumina, successive impregnation on alumina, and Ni impregnation on Nb-modified alumina using a Ni/Nb atom ratio of 2. Catalytic runs were performed at 235 ºC/ 45 bar for 30 h TOS, at 12.2 h−1 WHSV.All the catalysts showed high carbon yields to liquid products, mainly 1,2-propylene glycol and hydroxyacetone. The NiNb-SI catalyst, prepared through sequential impregnation of Nb and Ni, demonstrated the highest initial glycerol conversion rate (69.3%) and stability over 30 h TOS. Furthermore, it produced the highest carbon selectivity for propylene glycol at 56.7%. The catalytic performance of NiNb-SISi was also assessed under the same conditions with the addition of hydrogen, resulting in an enhanced capacity for dehydration-hydrogenation. However, glycerol conversion decreased. Post-reaction characterization revealed that catalyst deactivation was primarily caused by leaching, sintering and oxidation of Ni.

Enhancement of carbon dioxide adsorption performance on mesoporous alumina modified with alkaline earth metals

The mesoporous alumina-supported alkaline earth metal 5 M/MA (MA= mesoporous alumina, M=Mg, Ca, Sr, and Ba) and xMg/MA (x=1, 3, 5, and 7 wt%) adsorbents were synthesized via evaporation-induced self-assembly (EISA) and impregnation method. The adsorption properties of CO2 were evaluated by thermal gravimetric analyzer to focus on exploring the dynamic adsorption process of the prepared adsorbents. Loading alkaline earth metals mainly enhanced the basic sites of these adsorbents, and the alkaline sites played an extremely critical role in determining the amount of CO2 adsorbed. Of all the adsorbents prepared, 5Mg/MA exhibited the highest adsorption uptake (1.08 mmol/g), a 2.16-fold enhancement compared to MA (0.50 mmol/g). In-situ DRIFTS indicated that CO2 primarily existed in the form of carbonate species, and the analysis of adsorption kinetics elucidated that the adsorption process was predominantly chemisorbed, with external diffusion being the main process of adsorption. Simultaneously, based on DFT calculations, it has been found that Mg-loaded MA has a higher affinity for CO2 compared to MA, which providing a good explanation for the experimental results. Furthermore, the 5 Mg/MA adsorbent not only exhibited excellent adsorption capacity, but also maintained excellent cyclic stability after 10 adsorption and desorption cycle runs, making it a highly favorable option for capturing CO2.

Tunable evaporation-induced surface morphologies on chitosan film for light management

The surface morphologies of polymer films have been used to improve the performance or enable new applications of films, such as controllable adhesion, shape morphing and light management. However, complicated and destructive methods were applied to produce surface morphologies on chitosan (CS) film. To overcome this challenge, we report an evaporation-induced self-assembly to form the tunable morphologies on the surface of short-chain chitosan film by varying the evaporation rates that influence the aggregation behavior of polymer chains between order and disorder. It enables the simple, tunable and scalable fabrication of surface morphologies on CS film (CS solution concentration: 2 wt%, drying from room temperature (RT) to 80 °C) that provides controllable haze (3–74 %) and high transmittance (>85 %) for the production of hazy and transparent window coatings. This simple approach to producing tunable surface morphologies could inspire the synthesis of multifunctional polymer films with different surface structures, whose applications can be extended to cell culture interfaces, flexible bioelectronic and optoelectronic devices.

Crystalline nanoxylan from hot water extracted wood xylan at multi-length scale: Molecular assembly from nanocluster hydrocolloids to submicron spheroids

As a contribution to expand accessibility in the territory of bio-based nanomaterials, we demonstrate a novel material strategy to convert amorphous xylan preserved in wood biomass to hierarchical assemblies of crystalline nanoxylan on a multi-length scale. By reducing the end group in pressurized hot water extracted (PHWE) xylan to primary alcohol as a xylitol form with borohydride reduction, the endwise-peeling depolymerization is effectively impeded in the alkali-catalyzed hydrolytic cleavage of side substitutions in xylan. Nanoprecipitation by a gradual pH decrease resulted in a stable hydrocolloid dispersion in the form of worm-like nanoclusters assembled with primary crystallites, owing to the self-assembly of debranched xylan driven by strong intra- and inter-chain H-bonds. With evaporation-induced self-assembly, we can further construct the hydrocolloids as dry submicron spheroids of crystalline nanoxylan (CNX) with a high average elastic modulus of 47–83 GPa. Taking the advantage that the chain length and homogeneity of PHWE-xylan can be tailored, a structure-performance correlation was established between the structural order in CNX and the phosphorescent emission of this crystalline biopolymer. Rigid clusterization and high crystallinity that are constructed by strong intra- and inter-molecule interactions within the nanoxylan effectively restrict the molecular motion, thereby promoting the emission of ultralong organic phosphorescence.

Nanoporous aluminosilicate mediated synthesis of 2- and 2,2-substituted 2,3-dihydroquinazolin-4(1H)-ones

Nanoporous silicate materials, made by an operationally simple evaporation-induced self-assembly (EISA) approach, efficiently catalyze the formation of 2-substituted 2,3-dihydroquinazolin-4(1H)-ones from aldehydes and dimethyl acetals. This methodology can be extended to encompass the reaction of ketones and ketals to provide facile access to 2,2-disubstituted and spiro dihydroquinazolin-4(1H)-ones in high yields and short reaction times.

Micropatterning of biologically derived surfaces with functional clay nanotubes

ABSTRACT Micropatterning of biological surfaces performed via assembly of nano-blocks is an efficient design method for functional materials with complex organic–inorganic architecture. Halloysite clay nanotubes with high aspect ratios and empty lumens have attracted widespread interest for aligned biocompatible composite production. Here, we give our vision of advances in interfacial self-assembly techniques for these natural nanotubes. Highly ordered micropatterns of halloysite, such as coffee rings, regular strips, and concentric circles, can be obtained through high-temperature evaporation-induced self-assembly in a confined space and shear-force brush-induced orientation. Assembly of these clay nanotubes on biological surfaces, including the coating of human or animal hair, wool, and cotton, was generalized with the indication of common features. Halloysite-coated microfibers promise new approaches in cotton and hair dyeing, medical hemostasis, and flame-retardant tissue applications. An interfacial halloysite assembly on oil microdroplets (Pickering emulsion) and its core–shell structure (functionalization with quantum dots) was described in comparison with microfiber nanoclay coatings. In addition to being abundantly available in nature, halloysite is also biosafe, which makes its spontaneous surface micropatterning prospective for high-performance materials, and it is a promising technique with potential for an industrial scale-up.

Tailored (La0.2Pr0.2Nd0.2Tb0.2Dy0.2)2Ce2O7 as a Highly Active and Stable Nanocatalyst for the Oxygen Evolution Reaction.

Designing highly active and robust catalysts for the oxygen evolution reaction is key to improving the overall efficiency of the water splitting reaction. It has been previously demonstrated that evaporation induced self-assembly (EISA) can be used to synthesize highly porous and high surface area cerate-based fluorite nanocatalysts, and that substitution of Ce with 50% rare earth (RE) cations significantly improves electrocatalyst activity. Herein, the defect structure of the best performing nanocatalyst in the series are further explored, Nd2Ce2O7, with a combination of neutron diffraction and neutron pair distribution function analysis. It is found that Nd3 + cation substitution for Ce in the CeO2 fluorite lattice introduces higher levels of oxygen Frenkel defects and induces a partially reduced RE1.5Ce1.5O5 + x phase with oxygen vacancy ordering. Significantly, it is demonstrated that the concentration of oxygen Frenkel defects and improved electrocatalytic activity can be further enhanced by increasing the compositional complexity (number of RE cations involved) in the substitution. The resulting novel compositionally-complex fluorite- (La0.2Pr0.2Nd0.2Tb0.2Dy0.2)2Ce2O7 is shown to display a low OER overpotential of 210 mV at a current density of 10 mAcm-2 in 1M KOH, and excellent cycling stability. It is suggested that increasing the compositional complexity of fluorite nanocatalysts expands the ability to tailor catalystdesign.

Formation and Application of Polymer Spherulite-like Patterns of Halloysite Nanotubes by Evaporation-Induced Self-Assembly.

Halloysite nanotubes (HNTs) are one-dimensional clay nanomaterials featuring distinct tubular structures and unique surface charges. HNTs can readily form ordered assembly structures under specific conditions, which shows significant potential applications in optical and biological fields. In this study, sodium hexametaphosphate (SHMP) was employed as a stabilizer to prepare polymer spherulite-like patterns via the evaporation-induced self-assembly (EISA) technique. The incorporation of SHMP enhanced the repulsion force among the nanotubes and the surface potential, which facilitated the orderly deposition of HNTs. The influence of HNT concentration, SHMP concentration, drying temperature, and substrate on the polymer spherulites-like pattern has been investigated in detail. The optimal conditions were 10 wt % HNT dispersion, 0.6 wt % SHMP concentration, 30 °C as drying temperature, and glass substrates. In addition, by changing the droplet volume and shape of the three-phase contact line, patterns of different sizes and shapes can be achieved. Bovine serum albumin or metal salt compounds were incorporated into the dispersion of SHMP-modified HNTs, which altered the charge and the self-assembled patterns with different area ratios. Thus, this technology can be utilized for the analysis and comparison of protein and metal ion concentration accurately. This study creates the correlation between the structural parameters and the preparation process involved in creating polymer spherulite-like patterns of modified HNTs and offers fresh insights into potential applications for the self-assembly of HNT droplets in the realms of anticounterfeiting and solution concentration analysis.

Promotional effect and mechanism of SiO2 on Cr-Al2O3 catalysts for N2O-assisted oxidative dehydrogenation of ethylbenzene

A series of Cr-SiO2-Al2O3 (abbreviated as Cr-Si-Al) catalysts were synthesized using an evaporation induced self-assembled (EISA) method and applied to the N2O-assisted dehydrogenation of ethylbenzene (EB), offering a versatile solution for greenhouse gas recycling and a novel pathway for styrene (ST) production. Notably, the Cr-5Si-Al catalyst calcinated at 850 °C exhibited remarkable performance with a high EB conversion of 71% and a good ST selectivity of 62%, resulting in an optimal ST yield of nearly 44%. To elucidate the impact of calcination temperature and reveal the underlying promoting mechanism, numerous types of characterization particularly in-situ DRIFTS were used. Results indicated that the Cr-5Si-Al-850 catalyst possessed a distinctively ordered mesoporous structure, which improved the specific surface area and facilitated the dispersion of active species. The interaction among the multiple species in the catalyst was enhanced under the high calcination temperatures, leading to an increased ratio of Cr6+ and Oα, and thus promoting the dehydrogenation of EB. Furthermore, in situ DRIFTS revealed two favorable reaction pathways: one involving the reaction between adsorbed N2O and EB, and the other involving the reaction between adsorbed EB and N2O. These pathways led to the formation of a similar intermediate, observed at a wavenumber of 1285 cm−1. The improved adsorption of EB played a pivotal role in the excellent catalytic performance of the Cr-5Si-Al-850 catalyst.

Effect of C-Cl functional groups on adsorption and desorption of elemental mercury over an ordered mesoporous carbon modified with C-Cl functional groups

Wet desorption presents an environmentally sustainable approach for the disposal of deactivated elemental mercury (Hg0) removal adsorbents. However, the prevalence of insoluble Hg compounds in the adsorption products poses a significant impediment to the wet desorption process. In this work, an ordered mesoporous carbon modified with C-Cl functional groups (OMC-Cl) was synthesized via the evaporation-induced self-assembly (EISA) method. It has a high specific surface area (∼630 m2/g), large pore volume (∼0.64 cm3/g), and uniform pore size (∼22.0 nm). The presence of C-Cl functional groups provides a remarkable adsorption capacity to the adsorbent, exhibiting high adsorption efficiency in various adsorption atmospheres (96.8 % in pure N2; 91.7 % in N2 + H2S) and promoting the prevalence of soluble HgCl2 in the adsorption product. Density functional theory analysis has elucidated that the C-Cl functional groups exerted inhibitory effects on the formation of HgO and HgS mainly by weakening the adsorption process of Hg0 on C = O and C-S. The desorption efficiencies of adsorption products in the above atmospheres in HCl solution (0.5 mol/L) achieved 95.4 % and 81.3 %, respectively. The high concentration of H+ ions serves to prevent the re-adsorption of Hg2+ by the -SH generated during the adsorption process. Furthermore, the adsorbent desorbed in HCl solution manifests substantial potential for recyclability. This study introduces a novel approach for efficient wet desorption in terms of designing active sites to modulate the adsorption products and pore structures to facilitate mass transfer.

Surface control of Ni-Al2O3 dry reforming of methane catalyst by composition segregation

Catalyst surface control is of great importance considering that a catalytic reaction initially starts with surface atoms’ interaction with reactant molecules. In the present study, we synthesized the Ni-Al2O3 dry reforming of methane (DRM) catalyst via the spray-pyrolysis-assisted evaporation-induced self-assembly (EISA) method in order to systematically investigate catalyst surface change as controlled by composition segregation. The present results showed that segregation in the Ni-Al2O3 catalyst had successfully occurred by the post-annealing process and that the segregated Ni nanoparticles were located on the catalyst surface with simultaneous reduction to metal. The size of the surface Ni nanoparticles was highly dependent on the post-annealing temperature, whereas the electronic properties did not consistently align with the trend of particle-size growth, indicating that the particle-growth mechanism underwent alterations from segregation to sintering as the temperature was increased. In other words, when the reduction temperature for metal segregation is excessively high, particle-growth on the external catalyst surface, as induced by post-annealing, is primarily attributable to particle sintering rather than to metal segregation. This phenomenon directly results in decreased Ni surface density. The catalytic DRM reaction revealed that due to sintering, the catalytic performance did not align with the trend of Ni particle-size growth, and the conversion of CH4/CO2 was closely associated with Ni surface density. This information will offer valuable insight to future research focused on development of Ni-based catalysts for DRM reactions.

Tailoring pore size of mesoporous silica and organosilica using biodegradable pentablock copolymer templates via EISA process

In this work, we have designed unique poly(lactic acid-co-glycolic acid)-b-poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-b-poly(lactic acid-co-glycolic acid) pentablock copolymers using Pluronic F68 and F108 triblock copolymers as macroinitiators. The poly(lactic acid-co-glycolic acid) (PLGA) blocks were attached as glycolide and lactide monomers at the both ends of each F68 and F108 triblock copolymer. The molecular weights and the block fractions were confirmed by gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) for the four kinds of pentablock copolymers. Using these pentablock copolymers as templates, we synthesized mesoporous ethane-silicas as well as silicas by the evaporation-induced self-assembly (EISA) method. 1,2-bis(triethoxysily)ethane (BTEE) were used as an organosilica precursor. The mesoporous ethane-silica samples were characterized using synchrotron small angle X-ray scattering (SAXS), nitrogen sorption experiments, transmission electron microscopy (TEM), and solid-state 29Si CP-MAS NMR. Based on the experimental results, it was confirmed that the porosity and pore diameter can be varied with the PLGA weight fraction of the pentablock copolymer. It is due to the PLGA block in polymer forming the hydrophobic domain in micelles, which leads to the formation of increased pore size over 20 nm without any additive pore expander. In addition, it seems that as the organosilica precursor increases, the association number of block copolymers forming one micelle decreases, resulting in a decrease in pore size. In summary, the polymer template plays a vital part in tuning the structure of the mesoporous ethane-silica samples. Thus, the development of synthetic method of mesoporous organosilica materials using polymer templates with different topology is still challenging and can endow the unique structure and property for mesoporous organosilica for future applications.

Charge trapping-induced current–voltage hysteresis in a squaraine nanowire mesh enables synaptic memristive functionality

Nanowires (NWs) composed of 2,4-bis[(4-diethylamino)-2-hydroxyphenyl] squaraine were prepared by evaporation-induced self-assembly (EISA). NWs were ∼560 nm wide (aspect ratios: 10–90). X-ray diffraction analysis indicated polymorphism (monoclinic/triclinic). Optical data reported the triclinic phase with energetic disorder. Given the favorable alignment of the Au work function and squaraine HOMO energy, symmetric, unipolar metal–insulator–metal devices were formed by the EISA of NW meshes on inter-digitated Au electrodes. Room temperature DC I–V characteristics displayed hysteretic I–V loops, indicating memristive behavior. At low bias, data indicated Ohmic transport with carrier extraction facilitated by thermionic emission. At high biases, devices exhibited space-charge-limited conduction in the presence of shallow traps. At 77 K, data indicated Ohmic transport at low bias with carrier extraction by thermionic emission while, at high biases, trap-limited space-charge-limited conduction in the presence of traps distributed in energy, with carrier extraction by Fowler–Nordheim tunneling, was observed. The I–V hysteresis was eliminated at 77 K and attenuated by fast scan rates at room temperature, suggesting that carrier trapping/de-trapping underpinned the hysteresis. In impedance measurements, the device response fitted a Randles equivalent circuit indicating purely electronic conduction. By applying voltage waveforms, I–V hysteresis and analog resistive switching (memristive) functionality were observed. Device conductance could be increased sweep by sweep, giving conductance tuning through distinct states, with wait time- or voltage-erase options, consistent with trap filling/emptying effects. Repeated erase–write–read of multiple distinct states over many voltage cycles during continuous use in air was demonstrated. Finally, synaptic functions, e.g., pulse-dependent plasticity, and short- to long-term memory transition, were successfully emulated.

Mesoporous RE0.5Ce0.5O2-x Fluorite Electrocatalysts for the Oxygen Evolution Reaction.

Developing highly active and stable electrocatalysts for the oxygen evolution reaction (OER) is key to improving the efficiency and practical application of various sustainable energy technologies including water electrolysis, CO2 reduction, and metal air batteries. Here, we use evaporation-induced self-assembly (EISA) to synthesize highly porous fluorite nanocatalysts with a high surface area. In this study, we demonstrate that a 50% rare-earth cation substitution for Ce in the CeO2 fluorite lattice improves the OER activity and stability by introducing oxygen vacancies into the host lattice, which results in a decrease in the adsorption energy of the OH* intermediate in the OER. Among the binary fluorite compositions investigated, Nd2Ce2O7 is shown to display the lowest OER overpotential of 243 mV, achieved at a current density of 10 mA cm-2, and excellent cycling stability in an alkaline medium. Importantly, we demonstrate that rare-earth oxide OER electrocatalysts with high activity and stability can be achieved using the EISA synthesis route without the incorporation of transition and noble metals.

Polyethylene glycol regulates the pitch and liquid crystal behavior of cellulose nanocrystal-based photonic crystals

Inspired by iridescent color in natural creations, cellulose nanocrystal (CNC) photonic crystals artificially created by nanotechnology have great application prospects due to their potential to control light propagation in the linear and nonlinear regimes. One of the most important development directions of photonic crystals is the diversification of colors, usually by adjusting the pitch. However, few researchers notice the effect of polymer molecular weight and content on pitch regulation and the interaction between polymer and CNC liquid crystals. Polyethylene glycol (PEG) were used as polymers to regulate the pitch of CNC photonic crystals and investigate the changes in microstructure, crystal structure, thermal properties, and liquid crystal texture of the composites by changing the PEG content and molecular weight. Different photonic crystal construction systems show that when the molecular weight of PEG is 0.4 k, it can be filled between CNCs to regulate the pitch of photonic crystals, while when the molecular weight of PEG is 20 k, it cannot always be filled between CNCs in evaporation-induced self-assembly (EISA) process due to the depletion interaction, which cannot effectively regulate the pitch. This study reveals the relationship between PEG and CNC liquid crystals, which supports the development of photonic crystals and the pitch regulation.