Image Quality Evaluation Research Articles

Evaluation of 3D T1-weighted spoiled gradient echo MR image quality using artificial intelligence image reconstruction techniques in the pediatric brain

PurposeTo assess image quality and diagnostic confidence of 3D T1-weighted spoiled gradient echo (SPGR) MRI using artificial intelligence (AI) reconstruction.Materials and methodsThis prospective, IRB-approved study enrolled 50 pediatric patients (mean age = 11.8 ± 3.1 years) undergoing clinical brain MRI. In addition to standard of care (SOC) compressed SENSE (CS = 2.5), 3D T1-weighted SPGR images were obtained with higher CS acceleration factors (5 and 8) to evaluate the ability of AI reconstruction to improve image quality and reduce scan time. Images were reviewed independently on dedicated research PACS workstations by two neuroradiologists. Quantitative analysis of signal intensities to calculate apparent grey and white matter signal to noise (aSNR) and grey-white matter apparent contrast to noise ratios (aCNR) was performed.ResultsAI improved overall image quality compared to standard CS reconstruction in 35% (35/100) of evaluations in CS = 2.5 (average scan time = 221 ± 6.9 s), 100% (46/46) of CS = 5 (average scan time = 113.3 ± 4.6 s) and 94% (47/50) of CS = 8 (average scan time = 74.1 ± 0.01 s). Quantitative analysis revealed significantly higher grey matter aSNR, white matter aSNR and grey-white matter aCNR with AI reconstruction compared to standard reconstruction for CS 5 and 8 (all p-values < 0.001), however not for CS 2.5.ConclusionsAI reconstruction improved overall image quality and gray-white matter qualitative and quantitative aSNR and aCNR in highly accelerated (CS = 5 and 8) 3D T1W SPGR images in the majority of pediatric patients.

Feature-level contrastive learning for full-reference light field image quality assessment

Light field (LF), as a new visual information representation for immersive experiences in virtual reality and augmented reality, has attracted extensive attention. It is of significance to establish the light field image quality assessment (LF-IQA) that conforms to the characteristics of human visual perception. Due to the spatial–angular inter-twined imaging mechanism, the quality evaluation for LF images faces more challenges than ordinary 2D/3D IQA. This paper proposes a feature-level contrastive learning based full-reference LF-IQA with a divide-and-conquer learning strategy. It first employs the cross-attention mechanism to learn the local contrast features related to the reference features from three subsets of distorted sub-aperture images (SAIs). Then a Transformer-based feature fusion is used to predict the overall perceptual quality. The evaluation experiments are carried out on three commonly used LF-IQA datasets: Win5-LID, NBU-LF1.0, and SHU. The experimental results demonstrate that our model outperforms the existing state-of-the-art LF-IQA methods.

Improving image quality via Deep learning: Aspects of speckle noise reduction applying the optimal weighted filter

This article explores the dynamic field of image denoising, with a specific emphasis on the novel Adaptive Euclidean Weighted Filters (AEWF) and their utilization in mitigating speckle noise. The inadequacy of conventional filters to handle the intricacies of contemporary applications has prompted researchers to investigate the potential benefits of integrating deep learning and optimization algorithms. By combining Convolutional Neural Networks (CNNs) and the Bat Optimization Algorithm (BOA), we develop an adaptive dynamic AEWF that prioritizes the reduction of speckle noise while accommodating various image attributes. By emulating the echolocation behavior of bats, BOA optimizes denoising parameters to guarantee outputs of superior quality. Convolutional and ReLU layers of CNNs are crucial during the denoising phase, while pooling layers are utilized to reduce the size of the image. Our comprehensive investigation contrasts the suggested methodology with traditional filters, evaluating its efficacy in mitigating speckle noise. The benchmarking metrics, namely the Structural Similarity Index (SSIM) and Peak Signal-to-Noise Ratio (PSNR), have respective mean values of 32.05 and 0.98. Through an exhaustive evaluation of feature preservation, noise reduction, and overall image quality, this study underscores the integrated AEWF's effectiveness in tackling current obstacles in the field of image processing.

Deep learning image reconstruction generates thinner slice iodine maps with improved image quality to increase diagnostic acceptance and lesion conspicuity: a prospective study on abdominal dual-energy CT

BackgroundTo assess the improvement of image quality and diagnostic acceptance of thinner slice iodine maps enabled by deep learning image reconstruction (DLIR) in abdominal dual-energy CT (DECT).MethodsThis study prospectively included 104 participants with 136 lesions. Four series of iodine maps were generated based on portal-venous scans of contrast-enhanced abdominal DECT: 5-mm and 1.25-mm using adaptive statistical iterative reconstruction-V (Asir-V) with 50% blending (AV-50), and 1.25-mm using DLIR with medium (DLIR-M), and high strength (DLIR-H). The iodine concentrations (IC) and their standard deviations of nine anatomical sites were measured, and the corresponding coefficient of variations (CV) were calculated. Noise-power-spectrum (NPS) and edge-rise-slope (ERS) were measured. Five radiologists rated image quality in terms of image noise, contrast, sharpness, texture, and small structure visibility, and evaluated overall diagnostic acceptability of images and lesion conspicuity.ResultsThe four reconstructions maintained the IC values unchanged in nine anatomical sites (all p > 0.999). Compared to 1.25-mm AV-50, 1.25-mm DLIR-M and DLIR-H significantly reduced CV values (all p < 0.001) and presented lower noise and noise peak (both p < 0.001). Compared to 5-mm AV-50, 1.25-mm images had higher ERS (all p < 0.001). The difference of the peak and average spatial frequency among the four reconstructions was relatively small but statistically significant (both p < 0.001). The 1.25-mm DLIR-M images were rated higher than the 5-mm and 1.25-mm AV-50 images for diagnostic acceptability and lesion conspicuity (all P < 0.001).ConclusionsDLIR may facilitate the thinner slice thickness iodine maps in abdominal DECT for improvement of image quality, diagnostic acceptability, and lesion conspicuity.

Integrating eye rotation and contrast sensitivity into image quality evaluation of virtual reality head-mounted displays.

Visual perception on virtual reality head-mounted displays (VR HMDs) involves human vision in the imaging pipeline. Image quality evaluation of VR HMDs may need to be expanded from optical bench testing by incorporating human visual perception. In this study, we implement a 5-degree-of-freedom (5DoF) experimental setup that simulates the human eye geometry and rotation mechanism. Optical modulation transfer function (MTF) measurements are performed using various camera rotation configurations namely pupil rotation, eye rotation, and eye rotation with angle kappa of the human visual system. The measured MTFs of the VR HMD are inserted into a human eye contrast sensitivity model to predict the perceptual contrast sensitivity function (CSF) on a VR HMD. At the same time, we develop a WebXR test platform to perform human observer experiments. Monocular CSFs of human subjects with different interpupillary distance (IPD) are extracted and compared with those calculated from optical MTF measurements. The result shows that image quality, measured as MTF and CSF, degrades at the periphery of display field of view, especially for subjects with an IPD different than that of the HMD. We observed that both the shift of visual point on the HMD eyepiece and the angle between the optical axes of the eye and eyepiece degrade image quality due to optical aberration. The computed CSFs from optical measurement correlates with those of the human observer experiment, with the optimal correlation achieved using the eye rotation with angle kappa setup. The finding demonstrates that more precise image quality assessment can be achieved by integrating eye rotation and human eye contrast sensitivity into optical bench testing.

Evaluation of T2W FLAIR MR image quality using artificial intelligence image reconstruction techniques in the pediatric brain

BackgroundArtificial intelligence (AI) reconstruction techniques have the potential to improve image quality and decrease imaging time. However, these techniques must be assessed for safe and effective use in clinical practice.ObjectiveTo assess image quality and diagnostic confidence of AI reconstruction in the pediatric brain on fluid-attenuated inversion recovery (FLAIR) imaging.Materials and methodsThis prospective, institutional review board (IRB)-approved study enrolled 50 pediatric patients (median age=12 years, Q1=10 years, Q3=14 years) undergoing clinical brain MRI. T2-weighted (T2W) FLAIR images were reconstructed by both standard clinical and AI reconstruction algorithms (strong denoising). Images were independently rated by two neuroradiologists on a dedicated research picture archiving and communication system (PACS) to indicate whether AI increased, decreased, or had no effect on image quality compared to standard reconstruction. Quantitative analysis of signal intensities was also performed to calculate apparent signal to noise (aSNR) and apparent contrast to noise (aCNR) ratios.ResultsAI reconstruction was better than standard in 99% (reader 1, 49/50; reader 2, 50/50) for overall image quality, 99% (reader 1, 49/50; reader 2, 50/50) for subjective SNR, and 98% (reader 1, 49/50; reader 2, 49/50) for diagnostic preference. Quantitative analysis revealed significantly higher gray matter aSNR (30.6±6.5), white matter aSNR (21.4±5.6), and gray-white matter aCNR (7.1±1.6) in AI-reconstructed images compared to standard reconstruction (18±2.7, 14.2±2.8, 4.4±0.8, p<0.001) respectively.ConclusionWe conclude that AI reconstruction improved T2W FLAIR image quality in most patients when compared with standard reconstruction in pediatric patients.

Generation of virtual monoenergetic images at 40 keV of the upper abdomen and image quality evaluation based on generative adversarial networks

BackgroundAbdominal CT scans are vital for diagnosing abdominal diseases but have limitations in tissue analysis and soft tissue detection. Dual-energy CT (DECT) can improve these issues by offering low keV virtual monoenergetic images (VMI), enhancing lesion detection and tissue characterization. However, its cost limits widespread use.PurposeTo develop a model that converts conventional images (CI) into generative virtual monoenergetic images at 40 keV (Gen-VMI40keV) of the upper abdomen CT scan.MethodsTotally 444 patients who underwent upper abdominal spectral contrast-enhanced CT were enrolled and assigned to the training and validation datasets (7:3). Then, 40-keV portal-vein virtual monoenergetic (VMI40keV) and CI, generated from spectral CT scans, served as target and source images. These images were employed to build and train a CI-VMI40keV model. Indexes such as Mean Absolute Error (MAE), Peak Signal-to-Noise Ratio (PSNR), and Structural Similarity (SSIM) were utilized to determine the best generator mode. An additional 198 cases were divided into three test groups, including Group 1 (58 cases with visible abnormalities), Group 2 (40 cases with hepatocellular carcinoma [HCC]) and Group 3 (100 cases from a publicly available HCC dataset). Both subjective and objective evaluations were performed. Comparisons, correlation analyses and Bland-Altman plot analyses were performed.ResultsThe 192nd iteration produced the best generator mode (lower MAE and highest PSNR and SSIM). In the Test groups (1 and 2), both VMI40keV and Gen-VMI40keV significantly improved CT values, as well as SNR and CNR, for all organs compared to CI. Significant positive correlations for objective indexes were found between Gen-VMI40keV and VMI40keV in various organs and lesions. Bland-Altman analysis showed that the differences between both imaging types mostly fell within the 95% confidence interval. Pearson’s and Spearman’s correlation coefficients for objective scores between Gen-VMI40keV and VMI40keV in Groups 1 and 2 ranged from 0.645 to 0.980. In Group 3, Gen-VMI40keV yielded significantly higher CT values for HCC (220.5HU vs. 109.1HU) and liver (220.0HU vs. 112.8HU) compared to CI (p < 0.01). The CNR for HCC/liver was also significantly higher in Gen-VMI40keV (2.0 vs. 1.2) than in CI (p < 0.01). Additionally, Gen-VMI40keV was subjectively evaluated to have a higher image quality compared to CI.ConclusionCI-VMI40keV model can generate Gen-VMI40keV from conventional CT scan, closely resembling VMI40keV.

The Impact of AI on Metal Artifacts in CBCT Oral Cavity Imaging.

This study aimed to assess the impact of artificial intelligence (AI)-driven noise reduction algorithms on metal artifacts and image quality parameters in cone-beam computed tomography (CBCT) images of the oral cavity. This retrospective study included 70 patients, 61 of whom were analyzed after excluding those with severe motion artifacts. CBCT scans, performed using a Hyperion X9 PRO 13 × 10 CBCT machine, included images with dental implants, amalgam fillings, orthodontic appliances, root canal fillings, and crowns. Images were processed with the ClariCT.AI deep learning model (DLM) for noise reduction. Objective image quality was assessed using metrics such as the differentiation between voxel values (ΔVVs), the artifact index (AIx), and the contrast-to-noise ratio (CNR). Subjective assessments were performed by two experienced readers, who rated overall image quality and artifact intensity on predefined scales. Compared with native images, DLM reconstructions significantly reduced the AIx and increased the CNR (p < 0.001), indicating improved image clarity and artifact reduction. Subjective assessments also favored DLM images, with higher ratings for overall image quality and lower artifact intensity (p < 0.001). However, the ΔVV values were similar between the native and DLM images, indicating that while the DLM reduced noise, it maintained the overall density distribution. Orthodontic appliances produced the most pronounced artifacts, while implants generated the least. AI-based noise reduction using ClariCT.AI significantly enhances CBCT image quality by reducing noise and metal artifacts, thereby improving diagnostic accuracy and treatment planning. Further research with larger, multicenter cohorts is recommended to validate these findings.

AI-based automated evaluation of image quality and protocol tailoring in patients undergoing MRI for suspected prostate cancer

PurposeTo develop and validate an artificial intelligence (AI) application in a clinical setting to decide whether dynamic contrast-enhanced (DCE) sequences are necessary in multiparametric prostate MRI. MethodsThis study was approved by the institutional review board and requirement for study-specific informed consent was waived. A mobile app was developed to integrate AI-based image quality analysis into clinical workflow. An expert radiologist provided reference decisions. Diagnostic performance parameters (sensitivity and specificity) were calculated and inter-reader agreement was evaluated. ResultsFully automated evaluation was possible in 87% of cases, with the application reaching a sensitivity of 80% and a specificity of 100% in selecting patients for multiparametric MRI. In 2% of patients, the application falsely decided on omitting DCE. With a technician reaching a sensitivity of 29% and specificity of 98%, and resident radiologists reaching sensitivity of 29% and specificity of 93%, the use of the application allowed a significant increase in sensitivity. ConclusionThe presented AI application accurately decides on a patient-specific MRI protocol based on image quality analysis, potentially allowing omission of DCE in the diagnostic workup of patients with suspected prostate cancer. This could streamline workflow and optimize time utilization of healthcare professionals.

Underwater Fish Object Detection with Degraded Prior Knowledge

Understanding fish distribution, behavior, and abundance is crucial for marine ecological research, fishery management, and environmental monitoring. However, the distinctive features of the underwater environment, including low visibility, light attenuation, water turbidity, and strong currents, significantly impact the quality of data gathered by underwater imaging systems, posing considerable challenges in accurately detecting fish objects. To address this challenge, our study proposes an innovative fish detection network based on prior knowledge of image degradation. In our research process, we first delved into the intrinsic relationship between visual image quality restoration and detection outcomes, elucidating the obstacles the underwater environment poses to object detection. Subsequently, we constructed a dataset optimized for object detection using image quality evaluation metrics. Building upon this foundation, we designed a fish object detection network that integrates a prompt-based degradation feature learning module and a two-stage training scheme, effectively incorporating prior knowledge of image degradation. To validate the efficacy of our approach, we develop a multi-scene Underwater Fish image Dataset (UFD2022). The experimental results demonstrate significant improvements of 2.4% and 2.5%, respectively, in the mAP index compared to the baseline methods ResNet50 and ResNetXT101. This outcome robustly confirms the effectiveness and superiority of our process in addressing the challenge of fish object detection in underwater environments.

Automated MRI Quality Assessment of Brain T1-weighted MRI in Clinical Data Warehouses: A Transfer Learning Approach Relying on Artefact Simulation

The emergence of clinical data warehouses (CDWs), which contain the medical data of millions of patients, has paved the way for vast data sharing for research. The quality of MRIs gathered in CDWs differs greatly from what is observed in research settings and reflects a certain clinical reality. Consequently, a significant proportion of these images turns out to be unusable due to their poor quality. Given the massive volume of MRIs contained in CDWs, the manual rating of image quality is impossible. Thus, it is necessary to develop an automated solution capable of effectively identifying corrupted images in CDWs. This study presents an innovative transfer learning method for automated quality con- trol of 3D gradient echo T1-weighted brain MRIs within a CDW, leveraging artefact sim- ulation. We first intentionally corrupt images from research datasets by inducing poorer contrast, adding noise and introducing motion artefacts. Subsequently, three artefact- specific models are pre-trained using these corrupted images to detect distinct types of artefacts. Finally, the models are generalised to routine clinical data through a transfer learning technique, utilising 3660 manually annotated images. The overall image quality is inferred from the results of the three models, each designed to detect a specific type of artefact. Our method was validated on an independent test set of 385 3D gradient echo T1-weighted MRIs. Our proposed approach achieved excellent results for the detection of bad quality MRIs, with a balanced accuracy of over 87%, surpassing our previous approach by 3.5 percent points. Additionally, we achieved a satisfactory balanced accuracy of 79% for the detection of moderate quality MRIs, outperforming our previous performance by 5 percent points. Our framework provides a valuable tool for exploiting the potential of MRIs in CDWs.

Blind Quality Assessment of Dense 3D Point Clouds with Structure Guided Resampling

Objective quality assessment of three-dimensional (3D) point clouds is essential for the development of immersive multimedia systems in real-world applications. Despite the success of perceptual quality evaluation for 2D images and videos, blind/no-reference metrics are still scarce for 3D point clouds with large-scale irregularly distributed 3D points. Therefore, in this article, we propose an objective point cloud quality index with Structure Guided Resampling (SGR) to automatically evaluate the perceptually visual quality of dense 3D point clouds. The proposed SGR is a general-purpose blind quality assessment method without the assistance of any reference information. Specifically, considering that the human visual system is highly sensitive to structure information, we first exploit the unique normal vectors of point clouds to execute regional pre-processing that consists of keypoint resampling and local region construction. Then, we extract three groups of quality-related features, including (1) geometry density features, (2) color naturalness features, and (3) angular consistency features. Both the cognitive peculiarities of the human brain and naturalness regularity are involved in the designed quality-aware features that can capture the most vital aspects of distorted 3D point clouds. Extensive experiments on several publicly available subjective point cloud quality databases validate that our proposed SGR can compete with state-of-the-art full-reference, reduced-reference, and no-reference quality assessment algorithms.

Performance of cone-beam computed tomography imaging during megavoltage beam irradiation under phase-gated conditions

PurposeTarget positions should be acquired during beam delivery for accurate lung stereotactic body radiotherapy. We aimed to perform kilovoltage (kV) imaging during beam irradiation (intra-irradiation imaging) under phase-gated conditions and evaluate its performance. MethodsCatphan 504 and QUASAR respiratory motion phantoms were used to evaluate image quality and target detectability, respectively. TrueBeam STx linac and the Developer Mode was used. The imaging parameters were 125 kVp and 1.2 mAs/projection. Flattened megavoltage (MV) X-ray beam energies 6, 10 and 15 MV and un-flattened beam energies 6 and 10 MV were used with field sizes of 5 × 5 and 15 × 15 cm2 and various frame rates for intra-irradiation imaging. In addition, using a QUASAR phantom, intra-irradiation imaging was performed during intensity-modulated plan delivery. The root-mean-square error (RMSE) of the CT-number for the inserted rods, image noise, visual assessment, and contrast-to-noise ratio (CNR) were evaluated. ResultsThe RMSEs of intra-irradiation cone-beam computed tomography (CBCT) images under gated conditions were 50–230 Hounsfield Unit (HU) (static < 30 HU). The noise of the intra-irradiation CBCT images under gated conditions was 15–35 HU, whereas that of the standard CBCT images was 8.8–27.2 HU. Lower frame rates exhibited large RMSEs and noise; however, the iterative reconstruction algorithm (IR) was effective at improving these values. Approximately 7 fps with the IR showed an equivalent CNR of 15 fps without the IR. The target was visible on all the gated intra-irradiation CBCT images. ConclusionSeveral image quality improvements are required; however, intra-irradiated CBCT images showed good visual target detection.

New liver window width in detecting hepatocellular carcinoma on dynamic contrast-enhanced computed tomography with deep learning reconstruction

Changing a window width (WW) alters appearance of noise and contrast of CT images. The aim of this study was to investigate the impact of adjusted WW for deep learning reconstruction (DLR) in detecting hepatocellular carcinomas (HCCs) on CT with DLR. This retrospective study included thirty-five patients who underwent abdominal dynamic contrast-enhanced CT. DLR was used to reconstruct arterial, portal, and delayed phase images. The investigation of the optimal WW involved two blinded readers. Then, five other blinded readers independently read the image sets for detection of HCCs and evaluation of image quality with optimal or conventional liver WW. The optimal WW for detection of HCC was 119 (rounded to 120 in the subsequent analyses) Hounsfield unit (HU), which was the average of adjusted WW in the arterial, portal, and delayed phases. The average figures of merit for the readers for the jackknife alternative free-response receiver operating characteristic analysis to detect HCC were 0.809 (reader 1/2/3/4/5, 0.765/0.798/0.892/0.764/0.827) in the optimal WW (120 HU) and 0.765 (reader 1/2/3/4/5, 0.707/0.769/0.838/0.720/0.791) in the conventional WW (150 HU), and statistically significant difference was observed between them (p < 0.001). Image quality in the optimal WW was superior to those in the conventional WW, and significant difference was seen for some readers (p < 0.041). The optimal WW for detection of HCC was narrower than conventional WW on dynamic contrast-enhanced CT with DLR. Compared with the conventional liver WW, optimal liver WW significantly improved detection performance of HCC.

An Image Quality Evaluation and Masking Algorithm Based On Pretrained Deep Neural Networks

With the growing amount of astronomical data, there is an increasing need for automated data processing pipelines, which can extract scientific information from observation data without human interventions. A critical aspect of these pipelines is the image quality evaluation and masking algorithm, which evaluate image qualities based on various factors such as cloud coverage, sky brightness, scattering light from the optical system, point-spread-function size and shape, and read-out noise. Occasionally, the algorithm requires masking of areas severely affected by noise. However, the algorithm often necessitates significant human interventions, reducing data processing efficiency. In this study, we present a deep-learning-based image quality evaluation algorithm that uses an autoencoder to learn features of high quality astronomical images. The trained autoencoder enables automatic evaluation of image quality and masking of noise affected areas. We have evaluated the performance of our algorithm using two test cases: images with point spread functions of varying full width half magnitude, and images with complex backgrounds. In the first scenario, our algorithm could effectively identify variations of the point spread functions, which can provide valuable reference information for photometry. In the second scenario, our method could successfully mask regions affected by complex regions, which could significantly increase the photometry accuracy. Our algorithm can be employed to automatically evaluate image quality obtained by different sky surveying projects, further increasing the speed and robustness of data processing pipelines.

Latent diffusion model-based MRI superresolution enhances mild cognitive impairment prognostication and Alzheimer's disease classification

IntroductionTimely diagnosis and prognostication of Alzheimer's disease (AD) and mild cognitive impairment (MCI) are pivotal for effective intervention. Artificial intelligence (AI) in neuroradiology may aid in such appropriate diagnosis and prognostication. This study aimed to evaluate the potential of novel diffusion model-based AI for enhancing AD and MCI diagnosis through superresolution (SR) of brain magnetic resonance (MR) images. Methods1.5T brain MR scans of patients with AD or MCI and healthy controls (NC) from Alzheimer's Disease Neuroimaging Initiative 1 (ADNI1) were superresolved to 3T using a novel diffusion model-based generative AI (d3T*) and a convolutional neural network-based model (c3T*). Comparisons of image quality to actual 1.5T and 3T MRI were conducted based on signal-to-noise ratio (SNR), naturalness image quality evaluator (NIQE), and Blind/Referenceless Image Spatial Quality Evaluator (BRISQUE). Voxel-based volumetric analysis was then conducted to study whether 3T* images offered more accurate volumetry than 1.5T images. Binary and multiclass classifications of AD, MCI, and NC were conducted to evaluate whether 3T* images offered superior AD classification performance compared to actual 1.5T MRI. Moreover, CNN-based classifiers were used to predict conversion of MCI to AD, to evaluate the prognostication performance of 3T* images. The classification performances were evaluated using accuracy, sensitivity, specificity, F1 score, Matthews correlation coefficient (MCC), and area under the receiver-operating curves (AUROC). ResultsAnalysis of variance (ANOVA) detected significant differences in image quality among the 1.5T, c3T*, d3T*, and 3T groups across all metrics. Both c3T* and d3T* showed superior image quality compared to 1.5T MRI in NIQE and BRISQUE with statistical significance. While the hippocampal volumes measured in 3T* and 3T images were not significantly different, the hippocampal volume measured in 1.5T images showed significant difference. 3T*-based AD classifications showed superior performance across all performance metrics compared to 1.5T-based AD classification. Classification performance between d3T* and actual 3T was not significantly different. 3T* images offered superior accuracy in predicting the conversion of MCI to AD than 1.5T images did. ConclusionsThe diffusion model-based MRI SR enhances the resolution of brain MR images, significantly improving diagnostic and prognostic accuracy for AD and MCI. Superresolved 3T* images closely matched actual 3T MRIs in quality and volumetric accuracy, and notably improved the prediction performance of conversion from MCI to AD.

3D visualization in turbid water using optimal photon counting and a GAT-based peplography method

Peplography is a three-dimensional (3D) approach for the visualization of targets in environments characterized by heavy scattering. It detects ballistic photons and subsequently generates a 3D image using integral imaging, where the expected number of ballistic photons is set arbitrarily. However, it affects the robustness of the method and accuracy in the analysis of results. Therefore, we propose a method to determine the optimal number of ballistic photons based on the maximum entropy of the photon counting image. Because accuracy in visualizing 3D targets may be compromised due to extraneous photons and fluctuations in photon intensity, we also address this challenge by integrating the generalized Anscombe transformation (GAT) with the conventional peplography technique. The noise caused by an image sensor during image acquisition can be modeled as a Poisson–Gaussian noise, and the photon counting process can be modeled as a Poisson process. Addressing such noise indirectly involves applying the GAT to the reconstructed image to stabilize its variance, denoising the stabilized data with a Gaussian denoising algorithm (i.e., non-local means filtering), and subsequently applying an exact unbiased inverse GAT to the denoised data. Experimental validation is conducted through experiments, with comparisons to conventional peplography, wavelet peplography, and a few standard dehazing and machine learning methods. Various image quality metrics such as correlation, structural similarity, the peak signal-to-noise ratio, and the natural image quality evaluator are used to demonstrate the superiority of the proposed method over conventional ones.

47‐2: Invited Paper: Modulated Analog Driving and Evaluation of Image Quality

Consumer demand for higher resolution, higher frame rate, and deeper color displays is driving the data rates of the connected video systems to the limits of affordability. At current high‐end displays, like 4K gaming at 360 Hz frame rate or 8K TV's at &gt;120 Hz frame rate, conventional data transports require parallel data‐pairs plus equalization circuits to deliver the required video data. These accommodations increase cost, power and complexity.HYPHY's revolutionary ‘modulated analog' (also referred to as “sampled Analog”) video transport is the solution to this impasse, demonstrably delivering 10X more video payload per “wire‐hertz” than traditional methods, delivering equal or better image quality.To emphasize the advantages of this method, HYPHY has developed an image and video quality measurement method that demonstrates the image quality of Modulated Analog to be at least on par with traditional display driving.

Shift-insensitive perceptual feature of quadratic sum of gradient magnitude and LoG signals for image quality assessment and image classification

Most existing full-reference (FR) Image quality assessment (IQA) models work in the premise of that the two images should be well registered. Shifting an image would lead to an inaccurate evaluation of image quality, because small spatial shifts are far less noticeable than structural distortion for human observers. To this regard, we propose to study an IQA feature that is shift-insensitive to the basic primitive structure of images, i.e., image edge. According to previous studies, the image gradient magnitude (GM) and the Laplacian of Gaussian (LoG) operator that depict the edge profiles of natural images are highly efficient structural features in IQA tasks. In this paper, we find that the Quadratic sum of the normalized GM and the LoG signals (QGL) has excellent shift-insensitive property in representing image edges after theoretically solving the selection problem of a ratio parameter to balance the GM and LoG signals. Based on the proposed QGL feature, two FR-IQA models can be built directly by measuring the similarity map with mean and standard deviation pooling strategies, named mQGL and sQGL, respectively. Experimental results show that the proposed sQGL and mQGL work robustly on four benchmark IQA databases, and QGL-based models show great shift-insensitive property to spatial translation and image rotation while judging the image quality. In addition, we explore the feasibility of combining QGL feature with deep neural networks, and verify that it can help to promote image pattern recognition in texture classification tasks.

Key-Point-Descriptor-Based Image Quality Evaluation in Photogrammetry Workflows

Photogrammetry depends critically on the quality of the images used to reconstruct accurate and detailed 3D models. Selection of high-quality images not only improves the accuracy and resolution of the resulting 3D models, but also contributes to the efficiency of the photogrammetric process by reducing data redundancy and computational demands. This study presents a novel approach to image quality evaluation tailored for photogrammetric applications that uses the key point descriptors typically encountered in image matching. Using a LightGBM ranker model, this research evaluates the effectiveness of key point descriptors such as SIFT, SURF, BRISK, ORB, KAZE, FREAK, and SuperPoint in predicting image quality. These descriptors are evaluated for their ability to indicate image quality based on the image patterns they capture. Experiments conducted on various publicly available image datasets show that descriptor-based methods outperform traditional no-reference image quality metrics such as BRISQUE, NIQE, PIQE, and BIQAA and a simple sharpness-based image quality evaluation method. The experimental results highlight the potential of using key-point-descriptor-based image quality evaluation methods to improve the photogrammetric workflow by selecting high-quality images for 3D modeling.