Eudragit E100 Research Articles

Enhanced gastric retention and drug release via development of novel floating microspheres based on Eudragit E100 and polycaprolactone: synthesis and in vitro evaluation

Eudragit E 100 and polycaprolactone (PCL) floating microspheres for enhanced gastric retention and drug release were successfully prepared by oil in water solvent evaporation method. Metronidazole benzoate, an anti-protozoal drug, was used as a model drug. Polyvinyl alcohol was used as an emulsifier. The prepared microspheres were observed for % recovery, % degree of hydration, % water uptake, % drug loading, % buoyancy and % drug release. The physico-chemical properties of the microspheres were studied by calculating encapsulation efficiency of microspheres and drug release kinetics. Drug release characteristics of microspheres were studied in simulated gastric fluid and simulated intestinal fluid i.e., at pH 1.2 and 7.4 respectively. Fourier transform infrared spectroscopy was used to reveal the chemical interaction between drug and polymers. Scanning electron microscopy was conducted to study the morphology of the synthesized microspheres.

Development of Oral Flexible Tablet (OFT) Formulation for Pediatric and Geriatric Patients: a Novel Age-Appropriate Formulation Platform.

Development of palatable formulations for pediatric and geriatric patients involves various challenges. However, an innovative development with beneficial characteristics of marketed formulations in a single formulation platform was attempted. The goal of this research was to develop solid oral flexible tablets (OFTs) as a platform for pediatrics and geriatrics as oral delivery is the most convenient and widely used mode of drug administration. For this purpose, a flexible tablet formulation using cetirizine hydrochloride as model stability labile class 1 and 3 drug as per the Biopharmaceutical Classification System was developed. Betadex, Eudragit E100, and polacrilex resin were evaluated as taste masking agents. Development work focused on excipient selection, formulation processing, characterization methods, stability, and palatability testing. Formulation with a cetirizine-to-polacrilex ratio of 1:2 to 1:3 showed robust physical strength with friability of 0.1% (w/w), rapid in vitro dispersion within 30s in 2-6ml of water, and 0.2% of total organic and elemental impurities. Polacrilex resin formulation shows immediate drug release within 30min in gastric media, better taste masking, and acceptable stability. Hence, it is concluded that ion exchange resins can be appropriately used to develop taste-masked, rapidly dispersible, and stable tablet formulations with tailored drug release suitable for pediatrics and geriatrics. Flexible formulations can be consumed as swallowable, orally disintegrating, chewable, and as dispersible tablets. Flexibility in dose administration would improve compliance in pediatrics and geriatrics. This drug development approach using ion exchange resins can be a platform for formulating solid oral flexible drug products with low to medium doses.

Development of a chitosan based double layer-coated tablet as a platform for colon-specific drug delivery.

A double layer-coated colon-specific drug delivery system (DL-CDDS) was developed, which consisted of chitosan (CTN) based polymeric subcoating of the core tablet containing citric acid for microclimate acidification, followed by an enteric coating. The polymeric composition ratio of Eudragit E100 and ethyl cellulose and amount of subcoating were optimized using a two-level factorial design method. Drug-release characteristics in terms of dissolution efficiency and controlled-release duration were evaluated in various dissolution media, such as simulated colonic fluid in the presence or absence of CTNase. Microflora activation and a stepwise mechanism for drug release were postulated. Consequently, the optimized DL-CDDS showed drug release in a controlled manner by inhibiting drug release in the stomach and intestine, but releasing the drug gradually in the colon (approximately 40% at 10 hours and 92% at 24 hours in CTNase-supplemented simulated colonic fluid), indicating its feasibility as a novel platform for CDD.

Reduced food interaction and enhanced gastrointestinal tolerability of a new system based on risedronate complexed with Eudragit E100: Mechanistic approaches from in vitro and in vivo studies

Novel complexes consisting of Eudragit E100-risedronate are presented. The oral bioavailability of risedronate in rats was determined through its percentage excreted in urine after administration of complexed or free risedronate in fed and fasted conditions. The evaluation of the risedronate gastro-duodenal irritation potential was carried out by macroscopic and histological analyses in an experimental rat model. The degree of counterionic condensation between Eudragit E100 and risedronate was assessed by dialysis with, mechanistic information about the interaction with calcium and the release of risedronate from the complexes being obtained using physiological solution and simulated gastric fluid without pepsin. Non-significant differences were observed in the urinary excretion of risedronate when the complex or free risedronate was administered to fasted rats. However, the urinary excretion of risedronate in the complex group was 4-times higher than in the free risedronate group when animals were concomitantly administered with food. This behavior was related to the high degree of counterionic condensation in the complex (86.5%), which led to a reduction in the calcium induced rate and magnitude of risedronate precipitation and resulted in a decrease in the gastroduodenal damage from the complex, as evidenced by a lower frequency of gastric mucosae hemorrhage. A sustained release of risedronate from the complex was observed toward water, simulated gastric fluid or physiological solution, through an ionic-exchange mechanism. In conclusion, complexation with Eudragit E100 could be a useful strategy to overcome the unfavorable properties of risedronate.

Evaluation of the topical spray containing Centella asiatica extract and its efficacy on excision wounds in rats.

Centella asiatica was extracted by methanol. The assay content of triterpenes in the extract was 0.12 % asiatic acid, 0.54 % madecassic acid, 0.25 % asiaticoside and 1.02 % madecassoside. The extract was complexed with hydroxypropyl-β-cyclodextrin (HP-β-CD) and formulated with Eudragit E100, glycerol, PEG 400, copovidone, ethanol and purified water. A clear yellowish solution (F1-F8) was obtained. The formulations had a pH of 5.5-6.0 with viscosity in the range of 20-60 mPa s, surface tension 20.3-24.6 mN m-1 and contact angle less than 20°. The amount of PEG 400 and copovidone affected the film and spreadability. The content of triterpenes in the spray formulation was close to 100 % compared to triterpenes in the extract. The skin irritation study indicated that the formulation was non-irritating in a rat model. An in vivo excision wound healing model showed that wound excision was completely healed after 14 days.

Engineered nanoparticles of Efavirenz using methacrylate co-polymer (Eudragit-E100) and its biological effects in-vivo

Nanotechnology in drug delivery is explored widely to improve therapeutic efficacy and minimize undesirable effects of several anti-HIV drugs. Efavirenz is a non-nucleoside reverse transcriptase inhibitor, prescribed as first-line drug of choice for treatment of AIDS. It is poorly soluble and exhibits variable bioavailability hence, a high oral dose is recommended for therapy. The present work focuses on improving the dissolution and bioavailability of Efavirenz through nano drug delivery approach. Polymeric nanoparticles were developed using Eudragit E100 and characterized for size, stability, morphology, cytotoxicity (MTT assay in T-lymphatic (C8166) cell lines) and in-vivo biodistribution in mice models. The optimized nanoparticles exhibited average particle size of 110nm, zeta potential of −33mV and entrapment efficiency 99%. The SEM images displayed the formation of nano-size particles. The cell viability was significantly improved in the nanoparticles (99%) compared to pure drug (15%) at the concentration of 8μg/mL. The in-vivo biodistribution profile of the nanoparticles showed considerably higher drug concentration in serum and major organs, especially in the brain compared to the free drug. The optimized Efavirenz loaded nanoparticles clearly demonstrated an increase in dissolution, drug distribution, and bioavailability, which implies better control over the therapeutic dosing.

Design of acid-responsive polymeric nanoparticles for 7,3',4'-trihydroxyisoflavone topical administration

7,3′,4′-Trihydroxyisoflavone (734THIF) is a secondary metabolite of daidzein and has been recently found to possess antioxidant, melanin inhibition, and skin cancer chemopreventive activities. However, the poor water solubility of 734THIF impedes its absorption and skin penetration and, therefore, limits its pharmacological effects when applied topically to the skin. We seek to use the nanoprecipitation method to prepare optimal eudragit E100 (EE)–polyvinyl alcohol (PVA)-loaded 734THIF nanoparticles (734N) to improve its physicochemical properties and thereby increase its water solubility, skin penetration, and biological activities. EE–PVA-loaded 734THIF nanoparticles (734N) were prepared, and their morphology and particle size were evaluated using a particle size analyzer and by electron microscopy. The drug loading and encapsulation efficiencies and in vitro solubility were determined using high-performance liquid chromatography. Hydrogen-bond formation was evaluated by 1H-nuclear magnetic resonance and Fourier transform infrared spectroscopy, and crystalline-to-amorphous transformation was determined by differential scanning calorimetry and X-ray diffractometry. In vitro skin penetration was analyzed using fresh pig skin mounted on Franz diffusion cells, and cytotoxicity against human keratinocyte HaCaT cells was evaluated using the MTT assay. Antioxidant activity was determined by 2,2-diphenyl-1-picrylhydrazyl-free radical scavenging ability. EE–PVA-loaded 734THIF nanoparticles showed good drug loading and encapsulation efficiencies and were characterized by improved physicochemical properties, including reduction in particle size, amorphous transformation, and intermolecular hydrogen-bond formation. This is associated with increased water solubility and enhanced in vitro skin penetration, with no cytotoxicity toward HaCaT cells. In addition, 734THIF nanoparticles retained their antioxidant activity. In conclusion, 734THIF nanoparticles are characterized by improved physicochemical properties, increased water solubility, and enhanced skin penetration, and these may have potential use in the future as a topical delivery formulation for the treatment of skin diseases.

Role of Molecular Interactions for Synergistic Precipitation Inhibition of Poorly Soluble Drug in Supersaturated Drug-Polymer-Polymer Ternary Solution.

We are reporting a synergistic effect of combined Eudragit E100 and PVP K90 in precipitation inhibition of indomethacin (IND) in solutions at low polymer concentration, a phenomenon that has significant implications on the usefulness of developing novel ternary solid dispersion of poorly soluble drugs. The IND supersaturation was created by cosolvent technique, and the precipitation studies were performed in the absence and the presence of individual and combined PVP K90 and Eudragit E100. The studies were also done with PEG 8000 as a noninteracting control polymer. A continuous UV recording of the IND absorption was used to observe changes in the drug concentration over time. The polymorphic form and morphology of precipitated IND were characterized by Raman spectroscopy and scanning electron microscopy. The change in the chemical shift in solution (1)H NMR was used as novel approach to probe IND-polymer interactions. Molecular modeling was used for calculating binding energy between IND-polymer as another indication of IND-polymer interaction. Spontaneous IND precipitation was observed in the absence of polymers. Eudragit E100 showed significant inhibitory effect on nuclei formation due to stronger interaction as reflected in higher binding energy and greater change in chemical shift by NMR. PVP K90 led to significant crystal growth inhibition due to adsorption on growing IND crystals as confirmed by modified crystal habit of precipitate in the presence of PVP K90. Combination of polymers resulted in a synergistic precipitation inhibition and extended supersaturation. The NMR confirmed interaction between IND-Eudragit E100 and IND-PVP K90 in solution. The combination of polymers showed similar peak shift albeit using lower polymer concentration indicating stronger interactions. The results established the significant synergistic precipitation inhibition effect upon combining Eudragit E100 and PVP K90 due to drug-polymer interaction.

Enhancement of solubility and antidiabetic effects of Repaglinide using spray drying technique in STZ-induced diabetic rats

The purpose of the study was to enhance the solubility of the poorly water-soluble drug, Repaglinide using spray drying based solid dispersion technique by different carriers including Eudragit E100, hydroxyl propyl cellulose Mw 80 000 and poly vinyl pyrollidone K30. Optimization of the best formulation was carried out according to drug solubility, release profile, particle size and angle of repose of the solid dispersions. The optimized sample was characterized using X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). The morphology of the dispersions was studied by SEM. The blood glucose lowering effect of spray dried solid dispersions was studied in normal and streptozocin-induced diabetic rats. The results showed that Eudragit E100 in 1:3 ratio could enhance drug solubility by 100-fold. DSC studies indicated a marked change in melting point of the drug possibly due to strong hydrogen bonds between the drug and Eudragit, while FT-IR study did not show obvious interactions between them. According to XRPD results Repaglinide converted to an amorphous state in the spray dried dispersions. Spray dried Repaglinide reduced the blood glucose level significantly during the 8 h of obtaining blood samples in comparison with untreated drug (p < 0.05).

Eudragit E100 and Polysaccharide Polymer Blends as Matrices for Modified-Release Drug Delivery I: Physicomechanical Properties

Purpose: To compare the effects of two states of polymer/polymer blending (dry and aqueous/lyophilized) on the physicomechanical properties of tablets, containing blends of locust bean gum (LB) with Eudragit ® E100 (E100) and sodium carboxymethylcellulose (SCMC) as matrices. Methods: LB, SCMC and E100 were blended in their dry (as purchased) state or modified by aqueous blending and subsequent lyophilization, prior to use as matrices in tablets. The polymer blends were characterized by infra-red spectroscopy (FTIR), flow and compressibility tests, as well as physicomechanical analysis of their tablets. Results: No significant variations were noticeable in the FTIR peaks of the individual polymers in the dry and the aqueous/lyophilized states. Aqueous/lyophilized blending of the polymers resulted in better flow properties. The aqueous/lyophilized matrices were denser with improved mechanical strength and the tablets were harder than those produced from dry blended polymers. Conclusion: Dry blending of LB with E100 and SCMC greatly improved the physicomechanical properties of the tablets. This was further enhanced by aqueous/lyophilized blending. Keywords: Drug delivery, Polymer blend, Eudragit, Locust bean gum, Levodopa, Sodium carboxymethylcellulose, Matrix, Physicomechanical properties

Eudragit E100 and Polysaccharide Polymer Blends as Matrices for Modified-Release Drug Delivery II: Swelling and Release Studies

Purpose: To compare the effects of two states of polymer/polymer blending (dry and aqueous/lyophilized) of locust bean gum with Eudragit® E100 and sodium carboxymethylcellulose on swelling and drug (levodopa) release from their tablet matrices. Methods: Sodium carboxymethylcellulose (SCMC), Eudragit® (E100) and locust bean (LB) were blended in their dry (as purchased) state or modified by aqueous blending and subsequent lyophilization prior to use as tablet matrices. The tablets were evaluated for swelling and in vitro drug release. Furthermore, in vivo absorption was predicted from the in vitro release data by convolution method. Results: E100 matrices exhibited little or no swelling while the matrices of SCMC and LB and their blends exhibited a degree of swelling > 180 %. Aqueous blending and lyophilization modulated the rate of release from matrices formulated with LB, SCMC and their polymer/polymer blends. Drug release profiles of the lyophilized polymer/polymer blends matrices were dissimilar to those of the dry polymer/polymer blends. Formulations F1aq, F2aq and F3aq exhibited fairly uniform absorption in the first 8 h, indicating the possibility of producing a steady delivery of drug. Conclusion: Polymer blending of LB, SCMC and E100, achieved by aqueous blending and lyophilization, enhances the performance of the matrices thereby exhibiting controlled levodopa release with no burst effect and the tablets retained their three-dimensional network.

Fabrication of novel GMO/Eudragit E100 nanostructures for enhancing oral bioavailability of carvedilol

ABSTRACTIn the present work, novel nanostructures comprising of glyceryl monooleate (GMO) and Eudragit E100 were prepared using high intensity ultrasonic homogenization. 32 Factorial design approach was used for optimization of nanostructures. Results of regression analysis revealed that the amount of GMO and Eudragit E100 had a drastic effect on particle size and percent entrapment efficiency. Optimized carvedilol-loaded nanostructures (Car-NS) were characterized by FTIR, TEM, DSC, in vitro drug release study. Pharmacokinetic parameters such as Cmax, Tmax, Ke, Ka, Vd and AUC were estimated for Car-NS upon its oral administration in Sprague-Dawley rats. Particle size of Car-NS was found to be 183 ± 2.43 nm with an entrapment efficiency of 81.4 ± 0.512%. FTIR studies revealed loading and chemical compatibility of carvedilol with the components of nanostructures. DSC thermograms did not show endothermic peak for melting of carvedilol which could be attributed to solubilization of carvedilol in molten GMO during DSC run. The prepared Car-NS released carvedilol in sustained manner over a period of 10 h as suggested by in vitro drug release study. The pharmacokinetic study of Car-NS showed significant improvement in Cmax (two fold, p < 0.001) and AUC (four folds, p < 0.001) of carvedilol when compared to carvedilol suspension. Car-NS were found to be stable for a period of 3 months. Thus, a stable, floating, multiparticulate GMO/Eudragit E100 nanostructures having ability to release the drug in sustained manner with enhanced oral bioavailability can prove to be a promising carrier system for poorly water soluble drugs.

Microstructural investigation using synchrotron radiation X-ray microtomography reveals taste-masking mechanism of acetaminophen microspheres

The structure of solid drug delivery systems has considerable influence on drug release behaviors from particles and granules and also impacts other properties relevant to release characteristics such as taste. In this study, lipid-based microspheres of acetaminophen were prepared to mask the undesirable taste of drug and therefore to identify the optimal formulation for drug release. Synchrotron radiation X-ray computed microtomography (SR-μCT) was used to investigate the fine structural architectures of microspheres non-destructively at different sampling times during drug release test, which were simultaneously determined to quantitatively correlate the structural data with drug release behaviors. The results demonstrated that the polymeric formulation component, namely, cationic polymethacrylate (Eudragit E100), was the key factor to mask the bitter taste of acetaminophen by inhibiting immediate drug release thereby reducing the interaction intensity of the bitter material with the oral cavity taste buds. The structure and morphology of the microspheres were found to be influenced by the shape and particle size of the drug, which was also an important factor for taste-masking performance. The quantitative analysis generated detailed structural information which was correlated well with drug release behaviors. Thus, SR-μCT has been proved as a powerful tool to investigate the fine microstructure of particles and provides a new approach in the design of particles for taste masking.

Oral Disintegrating Tablets of Analgesic Drugs alone and in Combination for Pain Management

Oral disintegrating tablet (ODT) is the highly accepted oral drug delivery system due to its patient compliance. Pain is an unpleasant sensory and emotional experience usually treated with an analgesic. As the rapid onset of action is desirable with analgesic drugs, the present research work was attempted to develop individual and combination ODTs of lornoxicam (LX) and paracetamol (PCM). Bitterness of PCM was masked by co-grinding with Eudragit EPO whereas the taste of LX was masked either by forming inclusion complex with betacyclodextrin induced circular dichroism or by solid dispersion with Eudragit E100. ODTs were prepared by direct compression method using croscarmellose sodium, crospovidone and low substituted hydroxy propyl cellulose as disintegrants. In vitro drug release studies of ODTs were performed in simulated salivary fluid, 0.1 N HCl and modified dissolution media. Selected formulations were assessed for in vivo disintegration time and taste masking in healthy human volunteers. The optimized formulation was characterized by differential scanning calorimetry and by powder X-ray diffraction. As indicated by the above findings, the goal of the present study of developing a patient friendly, taste-masked, rapid pain relieving formulations amenable to large scale manufacture has been successfully achieved.

Reprint of “Characterisation and modelling of the thermorheological properties of pharmaceutical polymers and their blends using capillary rheometry: Implications for hot melt processing of dosage forms”

Given the growing interest in thermal processing methods, this study describes the use of an advanced rheological technique, capillary rheometry, to accurately determine the thermorheological properties of two pharmaceutical polymers, Eudragit E100 (E100) and hydroxypropylcellulose JF (HPC) and their blends, both in the presence and absence of a model therapeutic agent (quinine, as the base and hydrochloride salt). Furthermore, the glass transition temperatures (Tg) of the cooled extrudates produced using capillary rheometry were characterised using Dynamic Mechanical Thermal Analysis (DMTA) thereby enabling correlations to be drawn between the information derived from capillary rheometry and the glass transition properties of the extrudates. The shear viscosities of E100 and HPC (and their blends) decreased as functions of increasing temperature and shear rates, with the shear viscosity of E100 being significantly greater than that of HPC at all temperatures and shear rates. All platforms were readily processed at shear rates relevant to extrusion (approximately 200–300s−1) and injection moulding (approximately 900s−1). Quinine base was observed to lower the shear viscosities of E100 and E100/HPC blends during processing and the Tg of extrudates, indicative of plasticisation at processing temperatures and when cooled (i.e. in the solid state). Quinine hydrochloride (20% w/w) increased the shear viscosities of E100 and HPC and their blends during processing and did not affect the Tg of the parent polymer. However, the shear viscosities of these systems were not prohibitive to processing at shear rates relevant to extrusion and injection moulding. As the ratio of E100:HPC increased within the polymer blends the effects of quinine base on the lowering of both shear viscosity and Tg of the polymer blends increased, reflecting the greater solubility of quinine within E100. In conclusion, this study has highlighted the importance of capillary rheometry in identifying processing conditions, polymer miscibility and plasticisation phenomena.

Formulation and evaluation of clotrimazole transdermal spray

Context: Transdermal spray (TS) of clotrimazole (CTZ) was formulated to improve the drug transport through the skin up to 12 h to achieve the antifungal efficacy.Objective: The aim of present study was to formulate and evaluate antifungal transdermal spray to improve the permeation of clotrimazole across the skin and to decrease the dosing frequency in fungal infection.Materials and methods: Different ratios of ethanol and acetone and various grades of eudragit and ethyl cellulose were evaluated according to six criteria: viscosity, drying time, stickiness, appearance and integrity on skin and water washability. Propylene glycol (PG) and polyethylene glycol 400 (PEG 400) were used in the study as plasticizer and solubilizer. The TS was evaluated for in vitro drug release, spray angle, spray pattern, average weight per dose, pH, drug content, evaporation time, leak test and antifungal efficacy study.Results and discussion: Eudragit E100 and blend of ethanol and acetone (80:20) satisfied the desired criteria. The selection of optimized batch was based on the results of in vitro drug release, spray pattern and spray angle. The optimized batch showed the spray angle <85° and uniform spray pattern. The formulation containing PG showed higher drug release than PEG 400. The inclusion of eutectic mixture consisting of camphor and menthol (1:1) showed improved drug transport through the rat skin and larger mean zone of inhibition indicating the improved antifungal efficacy.Conclusion: The TS of CTZ can be an innovative and promising approach for the topical administration in the fungal diseases.

Preparation and Evaluation of Diclofenac Sodium Tablet Coated with Polyelectrolyte Multilayer Film Using Hypromellose Acetate Succinate and Polymethacrylates for pH-Dependent, Modified Release Drug Delivery.

Polyelectrolyte multilayer (PEM) film formed due to the electrostatic interaction between oppositely charged polyelectrolytes is of considerable interest because of their potential applications as both drug carriers and surface-modifying agents. In this study, in vitro studies were carried out on polyelectrolyte complexes formulated with Eudragit E (EE) and hypromellose acetate succinate (HPMCAS). The complexes of EE and HPMCAS were formulated by non-stoichiometric method. The prepared IPCs were investigated using Fourier transform infrared spectroscopy. Diclofenac sodium (DS) tablets were prepared and were coated with polymer solution of HPMCAS and EE to achieve pH-dependent and sustained-release tablets. Tablets were evaluated for their physical characteristics and in vitro drug release. The results of pharmacokinetic studies in rabbits showed that the selected formulation (F6) exhibited a delayed peak plasma concentration and marked sustained-release effect of drug in the in vivo drug release in comparison with marketed tablet. The suitable combination of PEM film based on EE and HPMCAS demonstrated potential candidate for targeted release of DS in the lower part of the gastrointestinal (GI) tract.

Characterisation and modelling of the thermorheological properties of pharmaceutical polymers and their blends using capillary rheometry: Implications for hot melt processing of dosage forms

Given the growing interest in thermal processing methods, this study describes the use of an advanced rheological technique, capillary rheometry, to accurately determine the thermorheological properties of two pharmaceutical polymers, Eudragit E100 (E100) and hydroxypropylcellulose JF (HPC) and their blends, both in the presence and absence of a model therapeutic agent (quinine, as the base and hydrochloride salt). Furthermore, the glass transition temperatures (Tg) of the cooled extrudates produced using capillary rheometry were characterised using Dynamic Mechanical Thermal Analysis (DMTA) thereby enabling correlations to be drawn between the information derived from capillary rheometry and the glass transition properties of the extrudates. The shear viscosities of E100 and HPC (and their blends) decreased as functions of increasing temperature and shear rates, with the shear viscosity of E100 being significantly greater than that of HPC at all temperatures and shear rates. All platforms were readily processed at shear rates relevant to extrusion (approximately 200–300s−1) and injection moulding (approximately 900s−1). Quinine base was observed to lower the shear viscosities of E100 and E100/HPC blends during processing and the Tg of extrudates, indicative of plasticisation at processing temperatures and when cooled (i.e. in the solid state). Quinine hydrochloride (20% w/w) increased the shear viscosities of E100 and HPC and their blends during processing and did not affect the Tg of the parent polymer. However, the shear viscosities of these systems were not prohibitive to processing at shear rates relevant to extrusion and injection moulding. As the ratio of E100:HPC increased within the polymer blends the effects of quinine base on the lowering of both shear viscosity and Tg of the polymer blends increased, reflecting the greater solubility of quinine within E100. In conclusion, this study has highlighted the importance of capillary rheometry in identifying processing conditions, polymer miscibility and plasticisation phenomena.

Probing the mechanisms of drug release from amorphous solid dispersions in medium-soluble and medium-insoluble carriers

The objective of the current study is to mechanistically differentiate the dissolution and supersaturation behaviors of amorphous drugs from amorphous solid dispersions (ASDs) based on medium-soluble versus medium-insoluble carriers under nonsink dissolution conditions through a direct head-to-head comparison. ASDs of indomethacin (IND) were prepared in several polymers which exhibit different solubility behaviors in acidic (pH1.2) and basic (pH7.4) dissolution media. The selected polymers range from water-soluble (e.g., PVP and Soluplus) and water-insoluble (e.g., ethylcellulose and Eudragit RL PO) to those only soluble in an acidic or basic dissolution medium (e.g., Eudragit E100, Eudragit L100, and HPMCAS). At 20wt.% drug loading, DSC and powder XRD analysis confirmed that the majority of incorporated IND was present in an amorphous state. Our nonsink dissolution results confirm that whether the carrier matrix is medium soluble determines the release mechanism of amorphous drugs from ASD systems which has a direct impact on the rate of supersaturation generation, thus in turn affecting the evolution of supersaturation in amorphous systems. For example, under nonsink dissolution conditions, the release of amorphous IND from medium-soluble carriers is governed by a dissolution-controlled mechanism leading to an initial surge of supersaturation followed by a sharp decline in drug concentration due to rapid nucleation and crystallization. In contrast, the dissolution of IND ASD from medium-insoluble carriers is more gradual as drug release is regulated by a diffusion-controlled mechanism by which drug supersaturation is built up gradually and sustained over an extended period of time without any apparent decline. Since several tested carrier polymers can be switched from soluble to insoluble by simply changing the pH of the dissolution medium, the results obtained here provide unequivocal evidence of the proposed transition of kinetic solubility profiles from the same ASD system induced by changes in the drug release mechanism in dissolution medium of a different pH.

Phase Behavior of Resveratrol Solid Dispersions Upon Addition to Aqueous media.

To investigate the phase behavior of resveratrol amorphous solid dispersions upon addition to aqueous media. Polymers with different crystallization inhibitor properties were used to form amorphous solid dispersions of resveratrol. Resveratrol crystallization in aqueous environments was monitored over time using Raman spectroscopy, and solution concentrations were determined by ultraviolet (UV) spectroscopy. The crystallization behavior varied depending on the type and amount of polymer present in the dispersion. Polyvinylpyrrolidone (PVP) and Eudragit E100 (E100) dispersions did not crystallize for 24 h when slurried in pH 6.8 buffer at 37°C. Even though no crystallization occurred, a supersaturated solution was not achieved, most likely because of resveratrol-polymer complexation. Dispersions formed with cellulose derivatives crystallized rapidly, and the extent of crystallization varied depending on the amount of polymer in the dispersion. The solution concentration achieved in the slurries varied considerably between the various solid dispersions and depended on several factors including the extent of resveratrol crystallization, the nature of the resveratrol-polymer interactions, and the concentration of solid dispersion added to the slurry. It was found that the extent of supersaturation was limited not only by crystallization, but also by soluble and insoluble complex formation between resveratrol and the polymer.