Background Radiation Research Articles

The 2022 February 15 Solar Energetic Particle Event at Mars: A Synergistic Study Combining Multiple Radiation Detectors on the Surface and in Orbit of Mars With Models

AbstractOn 2022‐02‐15, solar eruptions caused one of the most intensive Solar Particle Events (SPEs) in Solar Cycle 25 observed at various heliospheric locations. This study focuses on the enhancements of energetic proton flux observed by multiple detectors located at the orbit and on the surface of Mars. We carry out the first analysis by the Mars Energetic Particle Analyzer (MEPA) instrument on board the Chinese Tianwen‐1 spacecraft (TW‐1) at Mars orbit which also serves to validate the instrument's capability to measure protons of up to 100 MeV. We reconstruct the event spectrum up to 1 GeV and further model the event doses at Mars's orbit and surface which are then validated against the corresponding dosimetry data. Our study utilizes all available radiation detectors at Mars, advances our understanding of Mars's radiation environment induced by large SPEs, and emphasizes the necessity of continuous and synergistic radiation monitoring at Mars.

Study of Helium Irradiation Effect on Al6061 Alloy Fabricated by Additive Friction Stir Deposition

Additive friction stir deposition (AFS-D) is considered a productive method of additive manufacturing (AM) due to its ability to produce dense mechanical parts at a faster deposition rate compared to other AM methods. Al6061 alloy finds extensive application in aerospace and nuclear engineering; nevertheless, exposure to radiation or high-energy particles over time tends to deteriorate their mechanical performance. However, the effect of radiation on the components manufactured using the AFS-D method is still unexamined. In this work, samples from the as-fabricated Al6061 alloy, by AFS-D, and the Al6061 feedstock rod were irradiated with He+ ions to 10 dpa at ambient temperature. The microstructural and mechanical changes induced by irradiation of He+ were examined using a scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and nanoindentation. This study demonstrates that, at 10 dpa of irradiation damage, the feedstock Al6061 produced a bigger size of He bubbles than the AFS-D Al6061. Nanoindentation analysis revealed that both the feedstock Al6061 and AFS-D Al6061 samples have experienced radiation-induced hardening. These studies provide a valuable understanding of the microstructural and mechanical performance of AFS-D materials in radiation environments, offering essential data for the selection of materials and processing methods for potential application in aerospace and nuclear engineering.

The Role of Natural Background Radiation in Maintaining Genomic Stability in the CGL1 Human Hybrid Model System.

Natural background ionizing radiation is present on the earth's surface; however, the biological role of this chronic low-dose-rate exposure remains unknown. The Researching the Effects of the Presence and Absence of Ionizing Radiation (REPAIR) project is examining the impacts of sub-natural background radiation exposure through experiments conducted 2 km underground in SNOLAB. The rock overburden combined with experiment-specific shielding provides a background radiation dose rate 30 times lower than on the surface. We hypothesize that natural background radiation is essential for life and maintains genomic stability and that prolonged exposure to sub-background environments will be detrimental to biological systems. To evaluate this, human hybrid CGL1 cells were continuously cultured in SNOLAB and our surface control laboratory for 16 weeks. Cells were assayed every 4 weeks for growth rate, alkaline phosphatase (ALP) activity (a marker of cellular transformation in the CGL1 system), and the expression of genes related to DNA damage and cell cycle regulation. A subset of cells was also exposed to a challenge radiation dose (0.1 to 8 Gy of X rays) and assayed for clonogenic survival and DNA double-strand break induction to examine if prolonged sub-background exposure alters the cellular response to high-dose irradiation. At each 4-week time point, sub-background radiation exposure did not significantly alter cell growth rates, survival, DNA damage, or gene expression. However, cells cultured in SNOLAB showed significantly higher ALP activity, a marker of carcinogenesis in these cells, which increased with longer exposure to the sub-background environment, indicative of neoplastic progression. Overall, these data suggest that sub-background radiation exposure does not impact growth, survival, or DNA damage in CGL1 cells but may lead to increased rates of neoplastic transformation, highlighting a potentially important role for natural background radiation in maintaining normal cellular function and genomic stability.

Overview of the early campaign diagnostics for the SPARC tokamak (invited).

The SPARC tokamak is a high-field, Bt0 ∼12T, medium-sized, R0 = 1.85m, tokamak that is presently under construction in Devens, MA, led by Commonwealth Fusion Systems. It will be used to de-risk the high-field tokamak path to a fusion power plant and demonstrate the commercial viability of fusion energy. SPARC's first campaign plan is to achieve Qfus > 1 using an ICRF-heated, <10MW, high current, Ip ∼ 8.5 MA, L-mode fueled by D-T gas injection, and its second campaign will investigate H-mode operations in D-D. To facilitate plasma control and scientific learning, a targeted set of ∼50 plasma diagnostics are being designed and built for operation during these campaigns. While nearly all diagnostics are based on established techniques, the pace of deployment, relative to the first plasma, and the harshness of the thermal, electromagnetic, and radiation environment are unprecedented for medium-sized tokamaks. An overview of the SPARC diagnostic set is given, providing context to further details communicated by the SPARC team in companion publications that are system-specific. The system engineering philosophy for SPARC diagnostics is outlined, and the design and engineering verification process for components inside and outside the primary vacuum boundary are described. Diagnostics are mounted directly to the vacuum vessel as well as housed within a series of eight midplane and 24 off-midplane replaceable port plugs. With limited exceptions, signal conditioning, digitization electronics and cameras as well as lasers and microwave sources are localized to a series of five Diagnostic Lab spaces, totaling ∼350m2, located >15m from the center of the tokamak, on the other side of a 2.4m concrete shielding wall. A series of 31 large-scale penetrations have been included in the SPARC Tokamak Hall to facilitate integration of early campaign diagnostics and to provide upgradability.

Engineering implementation of permanent magnet uniform spreading system for 3 MeV electron beam accelerator

Electron radiation technology, a significant application of non-power civil nuclear technology, opens up various research opportunities for electron beam accelerators as radiation sources. This paper introduces the engineering implementation of a permanent magnet uniform spreading system for the 3 MeV electron beam accelerator. The system is designed to improve radiation homogeneity, which is a crucial performance parameter in the radiation processing. The paper firstly investigates the collimation of magnets and beam spot in electron beam accelerators and proposes a novel collimation method. In addition, we also address various engineering implementation challenges encountered during the practical application of the uniform spreading system's permanent magnet devices. As a prerequisite for the application of uniform spreading system, a long-term stability experiment is conducted on the permanent magnets in radiation environments. The engineering feasibility of the uniform spreading system is ultimately verified by assessing the radiation homogeneity at the target using radiation dose tablets.

Estimation of radon annual effective dose and excess lung cancer risk for the residents of KufrKhal, Jordan

This study aims to measure radon gas concentration, calculate the annual effective dose, and calculate excess lung cancer risk in KufrKhal-Jerash north of Jordan. Radon is a radioactive gas located everywhere and contributes more than 40% of people’s total dose from natural radiation. The Risk concerns have resulted from the increase in mortality due to lung cancer in KufrKhal. About 117 well-calibrated dosimeters were among the study area’s districts (Hill 1, Hill 2, Hill 3, and village center). Each dosimeter consists of a plastic cup with known dimensions and a piece of solid state nuclear track detector (SSNTD) type CR-39 fixed in the inner bottom of the cup. After 90 days, the retrieved detectors were chemically etched, and the track density (tracks.cm−2) was determined. The results showed that the average radon concentrations drastically varied between the districts of KufrKhal (17.1–128.8 Bqm−3). However, the mean radon values in different districts are closely related (64.4–75.5 Bq.m−3). The lowest concentration (17.1 Bqm−3) was found in the Hill 1 district, and the highest value (128.8 Bqm−3) was found in the village center. However, the overall radon concentration in KufrKhal was approximately 69.2 Bqm−3. This value is within the range of the national average level (43.2 – 77.4 Bq.m−3) and way below the national action level (200 Bq.m−3). Furthermore, the corresponding values of the annual effective dose (AED) and the excess lung cancer risk (ELCR) for dwellers in this village were calculated to be 1.8 mSv.y−1 and 0.2%, respectively. These values, according to Jordan’s national regulations are acceptable.

A novel method of high-density urban block form generation based on multi-objective solar performance optimization: A case study of Nanjing

Efficiently harnessing solar radiation in high-density urban environments to optimize block forms holds significant potential for advancing urban low-carbon development. This paper introduces a novel method for generating high-density block forms based on comprehensive solar utilization. Grasshopper was used to compile an automated workflow for block form generation, solar simulation, and multi-objective optimization algorithms. Leveraging maximum solar radiation within and surrounding the block and effective photovoltaic utilization ratio are the three objectives in the multi-objective optimization process. From 60,000 generated samples, 1200 block forms were selected as the Pareto fronts. As the plot ratio of the generated blocks increases from 3 to 7, the annual mean solar radiation around the block decreases from 891.3 kWh/m2 to 863.5 kWh/m2, a reduction of only 3.1 %. When the number of blocks within the block increases from 1 to 4, the average solar radiation inside the block increases from 484.8 kWh/m2 to 516.1 kWh/m2, an increase of about 6.5 %. Additionally, as site coverage increased from 30 % to 60 %, the average solar radiation inside the block decreased from 549.2 kWh/m2 to 459.8 kWh/m2, a decrease of approximately 17 %. Notably, the photovoltaic power generation fell from 90.3 kWh/m2 to 61.2 kWh/m2, a decrease of about 32 %. The results indicate that the grid modeling method and multi-objective optimization algorithm adopted in this study can significantly improve the diversity of block morphology and achieve multiple solar performance requirements. The findings support designers in swiftly assessing building volume rationality and solar utilization potential at the early stages of urban design.

Forecast of CMB TB and EB correlations for AliCPT-1

The correlations between T, E modes and B modes in cosmic microwave background (CMB) radiation, which are expected to vanish under parity symmetry, have become a sensitive probe of the new physics beyond the standard model. In this paper, we forecast the estimation of TB and EB cross power spectra using NILC and cILC on AliCPT-1 simulations together with Planck HFI and WMAP K maps as ancillary data. We find that, NILC performs better than cILC on measuring TB and EB correlations in light of its lower uncertainties. In terms of the birefringence angle estimation without assuming systematic errors, the combination of CMB TB and EB spectra from NILC cleaned simulations could reach a sensitivity of |β| < 0.058∘ with 2σ significance for the first observing season of AliCPT. Tripling the survey duration will improve this sensitivity to |β| < 0.041∘.

A new solution for the observed isotropic cosmic birefringence angle and its implications for the anisotropic counterpart through a Boltzmann approach

Abstract Cosmic Birefringence (CB) is a phenomenon in which the polarization of the Cosmic Microwave Background (CMB) radiation is rotated as it travels through space due to the coupling between photons and an axion-like field. We look for a solution able to explain the result obtained from the Planck Public Release 4 (PR4), which has provided a hint of detection of the CB angle, α = (0.30 ± 0.11)∘. In addition to the solutions, already present in the literature, which need a non-negligible evolution in time of the axion-like field during recombination, we find a new region of the parameter space that allows for a nearly constant time evolution of such a field in the same epoch. The latter reinforces the possibility to employ the commonly used relations connecting the observed CMB spectra with the unrotated ones, through trigonometric functions of the CB angle. However, if the homogeneous axion field sourcing isotropic birefringence is almost constant in time during the matter-dominated era, this does not automatically imply that the same holds also for the associated inhomogeneous perturbations. For this reason, in this paper we present a fully generalized Boltzmann treatment of this phenomenon, that is able, for the first time to our knowledge to deal with the time evolution of anisotropic cosmic birefringence (ACB). We employ this approach to provide predictions of ACB, in particular for the set of best-fit parameters found in the new solution of the isotropic case. If the latter is the correct model, we expect an ACB spectrum of the order of (10-15 ÷ 10-32) deg2 for the auto-correlation, and (10-7 ÷ 10-17) μK·deg for the cross-correlations with the CMB T and E fields, depending on the angular scale.

More is less: image enhancement technology reduces radiation exposure during anterior lumber interbody fusion

BACKGROUND CONTEXTFluoroscopy and radiation exposure occur during anterior lumbar interbody fusion (ALIF). Image enhancement technology is available that can potentially reduce radiation exposure. PURPOSEThe purpose of this study is to evaluate radiation exposure and fluoroscopy times comparing standard fluoroscopy (FL) with a low dose image enhancement platform (LD). STUDY DESIGNRetrospective review of prospectively maintained database. PATIENT SAMPLEConsecutive patients undergoing ALIF with either standard fluoroscopy or low dose image enhancement technology. OUTCOME MEASURESRadiation dispersion and fluoroscopy times in ALIF patients with standard fluoroscopy and low dose image enhancement technology. METHODSA retrospective review of a prospective database on consecutive patients who have undergone ALIF, stratified into 2 groups: subjects with standard fluoroscopy (FL), and low dose fluoroscopy with image enhancement technology (LD). RESULTSA total of 487 ALIF patients were included (FL: 372 vs. LD: 115). LD patients were significantly older (66 vs. 60 years), with more deformity cases (28% vs. 12%), and less degenerative cases (71% vs. 87%), all p<.05; no differences in sex, BMI, or the number of levels operated on between groups. Fluoroscopy time (sec) was significantly higher in LD (51.4 vs. 45.5), with a statistically significant reduction in radiation (mGy) compared to FL (23.3 vs. 48.2), both p<.05. Furthermore, the results showed that radiation dispersion is increasingly reduced as fluoroscopy time increases in LD compared to FL (12%, 56%, and 65% reduction in radiation dispersion for fluoroscopy time <30 sec, between 30 to 60 sec, and >60 sec, respectively). CONCLUSIONSThe use of low dose fluoroscopy with image enhancement technology significantly reduces the cumulative dose of radiation during ALIF compared to standard dose fluoroscopy. Also, radiation dispersion increasingly decreases as fluoroscopy time increases using low dose image enhancement technology. Low dose image enhancement technology improves the safety profile of ALIF for patients and operating room staff.

Elucidation of radiation-induced molecular fragmentation in triphenylmethane aromatic dye using mass spectrometric tool

This study investigates the potential of triphenylmethane dye as a gamma radiation dosimeter using gas chromatography-mass spectrometry (GC-MS) through detection of radiation-induced derivatives produced at low concentrations in the irradiated material. Pristine triphenylmethane established a reference baseline for the dye’s dosimetric properties to establish a differentiated signature of the radiation-synthesized derivatives. The two key radiation-induced derivatives identified and quantified in the present work were 2-Propanone,1,1-diphenyl- and diphenylcarbinol Benzenemethanol, α, α-diphenyl- which was found in trace amounts in pristine material due to possible natural chemical or radiation processes. Gamma irradiation significantly accelerates their formation in which their relative concentration increases linearly with increasing radiation dose up to 100 kGy. Unavoidable radiation-induced synthesis of low-mass radiation fragments was observed at higher gas chromatography retention time; and also exhibit a linear increase with dose within the investigated range.

Assessment of Natural Radioactivity and Radiation Hazard in Soil and Rock Samples from Mining Sites within North-Eastern Nigeria

Assessment of Natural Radioactivity and Radiation Hazard in Soil and Rock Samples from Mining Sites within North-Eastern Nigeria

Environmental Radioactivity Monitoring and Radiological Impact Assessment of Agbara Industrial Area, Ogun State, Nigeria

This study assessed the naturally occurring radioactivity of 40K, 238U, and 232Th, which pose a significant threat to human health, particularly when their concentrations exceed the threshold. Background radiation levels were measured at two specific locations, Access Bank and Market areas, across a total of forty (40) sample points. The measurements were taken using a calibrated RS125 Gamma Spectrometer (a portable NaI [Tl] detector) designed in Canada, in conjunction with a global positioning system (GPS) to accurately record the research coordinates within the Agbara industrial area, Ogun State, Nigeria. The mean activity concentrations of the primordial radionuclides were 177.87 Bqkg-1, 20.01 Bqkg-1, and 52.90 Bqkg-1 for 40K, 238U, and 232Th, respectively. More so, the in-situ measured dose rate (DR) ranges between 12.18 nGyh-1 (Access Bank area) and 97.95 nGyh-1 (Market area), with an average value of 47.22 nGyh-1. The average measured and estimated absorbed dose rates were within the safe limit of 57 nGyh-1 provided by UNSCEAR. However, the measured dose rates exceeded the recommended limit in ten locations, while measured activity for thorium exceeded the world average value for over half of the study locations. Although all estimated radiological parameters were within recommended threshold values, suggesting the low risk of exposure to higher levels of ionising radiation in most locations in the Agbara industrial area, there is a potential cancer risk for individuals who have resided in the area for 70 years or more due to long-term exposure to ionising radiation.

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

The Muon Collider is one of the options considered as the next step in High Energy Physics. It bears many challenges, last not least in superconducting magnet technology. The target and capture solenoid is one of them, a channel of approximately 18 m length consisting of co-axial solenoid magnets with a 1.2 m free bore and peak field on axis of 20 T. One of the main concerns come from the nuclear radiation environment that may influence the stable operation of the coil, as well as its material integrity. Energetic photons cause large radiation heat load, of the order of several kW in the cold mass, and deposit a considerable dose, several tens of MGy. Neutrons cause material damage, at the level of 10-3 DPA. These values are at the present limit of superconducting coil technology. We describe here the conceptual design of the target and capture solenoid, focusing on the HTS cable design, which is largely inspired by the VIPER concept developed at MIT. We show how to address margin and protection, cooling and mechanics specific to the HTS cable selected.

Galactic cosmic ray environment predictions for the NASA BioSentinel Mission, part 2:Post-mission validation

The BioSentinel CubeSat was deployed on the Artemis-I mission in November 2022 and has been continuously transmitting physical measurements of the space radiation environment since that time. Just before mission launch, we published computational model predictions of the galactic cosmic ray exposure expected inside BioSentinel for multiple locations and configurations. The predictions utilized models for the ambient galactic cosmic ray environment, radiation physics and transport, and BioSentinel geometry. Now that the nominal six-month BioSentinel mission has completed and some additional time has passed, those pre-launch predictions and additional model components can be validated. Dose-rate and linear energy transfer (LET) spectral measurements from the on-board dosimeter are presented along with a summary of the computational models used to calculate exposure quantities of interest. Sensitivity tests are performed to gauge the impact of various model choices on these quantities. Satellite data collected during the BioSentinel mission are used to provide some measure of independent validation for the galactic cosmic ray model used in the present calculations. It is shown that the combined models are in excellent agreement with the measured dose-rate. Model calculations agree well with measurement below ∼10 keV/µm and underpredict at higher LET. It is argued that the underprediction is likely due to detector response or low energy anomalous cosmic ray contributions able to reach the thinly shielded side of the on-board dosimeter.

RadLab: An open science resource for radiation studies relevant to human spaceflight

In response to the growing need of the space life sciences community for a publicly available single access point for radiation physics data relevant to human space exploration, an open data repository and analysis platform, RadLab, has been developed. RadLab consists of a database and a user-friendly data retrieval, visualization, and analysis toolkit, including a graphical user interface (GUI) and an application programming interface (API). RadLab complements the space biology data in the NASA Open Science Data Repository (OSDR) and aims to provide open, centralized access to radiation physics data relevant to spaceflight. Analysis tools contained in RadLab will facilitate intercomparison among different detectors and radiation data sets to better understand the radiation environment in spacecraft and planetary habitats, and facilitate the use of space radiation data by space biology investigators and radiation instrument developers.

The effect of residual mechanical stresses and vacancy defects on the diffusion expansion of the damaged layer during irradiation of BeO ceramics

The paper presents the results of a study on the application of Raman and UV spectroscopy methods to determine the structural damage kinetics in the near-surface layer of BeO ceramics caused by high-dose irradiation with He2+ ions. Interest in this type of ceramics is due to the combination of its structural and thermophysical parameters, making these ceramics one of the promising classes of materials for microelectronics and structural materials for nuclear reactors, with the possibility of operation in conditions of heightened radiation background. According to the conducted studies, it was established that with the irradiation fluence growth, changes in the nature of deformation structural distortions associated with the accumulation of residual mechanical stresses of tensile and compressive types are observed. At irradiation fluences of 1016-5×1016 Не2+/cm2, tensile stresses play a dominant role in structural distortions, while the value of compressive stresses at fluence growth makes up a small share in the overall nature of the deformations. Moreover, an elevation in the irradiation fluence above 5×1016 He2+/cm2 leads to a rise in the concentration of defects caused by the formation of oxygen vacancies, as well as He-VO type complexes, the presence of which is indicated by the halo intensity growth in the Raman spectra, as well as a change in the intensity of the absorption bands. Analysis of changes in thermophysical parameters revealed that a rise in structural distortions associated with the accumulation of complex defects results in thermal conductivity reduction and a deterioration in heat transfer processes associated with partial amorphization of the damaged layer. Moreover, the established direct relationship between the value of residual mechanical stresses and the degradation of thermal conductivity indicates the cumulative effect of destructive changes caused by irradiation, as well as the influence of diffusion mechanisms on the damaged layer thickness growth.

Health risk assessment of radiation dose level in oranges and mangoes fruits from farms in Benue State, Nigeria

The health risk and radiation dose level in Oranges and Mangoes due to ingestion from farm locations in Benue State was assessed. A total of fifty (50) samples were collected in five different farm locations in Benue State, the samples were washed with distilled water to remove dirt, a radiation meter was placed 10cm from the fruits and measurements were taken for 30 seconds, background radiation levels and radiation dose level from the fruits were measured and calculated. The results showed that the radiation dose level for Oranges ranged from 1.489 to 2.365 mSv/hr and 1.122 to 1.899 mSv/hr for mangoes and the Annual Equivalent Doses (AED) for Oranges and Mangoes consumption was estimated to be 0.107 and 0.027 mSv/yr, respectively. Both values exceeded the World Health Organization (WHO) and the United States Environmental Protection Agency (USEPA) recommended limit of 1.0 mSv/yr. The high radiation levels could be attributed to naturally occurring radioactive materials in the soil or water, contamination from nearby sources. The Excess Lifetime Cancer Risk (ELCR) was calculated, with values of 0.2677 for Oranges and 0.683 for Mangoes, which are lower than the safe limit specified by WHO. While there is minimal risk associated with radiation exposure from consuming these fruits, further monitoring and investigation are necessary to ensure food safety and security in the study area.

Distinguishing bounce and inflation via quantum signatures from cosmic microwave background

Cosmological inflation is a popular paradigm for understanding Cosmic Microwave Background Radiation (CMBR); however, it faces many conceptual challenges. An alternative mechanism to inflation for generating an almost scale-invariant spectrum of perturbations is a bouncing cosmology with an initial matter-dominated contraction phase, during which the modes corresponding to currently observed scales exited the Hubble radius. Bouncing cosmology avoids the initial singularity but has fine-tuning problems. Taking an agnostic view of the two early-universe paradigms, we propose a quantum measure — Dynamical Fidelity Susceptibility (DFS) of CMBR — that distinguishes the two scenarios. Taking two simple models with the same power-spectrum, we explicitly show that DFS behaves differently for the two scenarios. We discuss the possibility of using DFS as a distinguisher in the upcoming space missions.

Improving Fault Tolerance for FPGA SoCs through Post-Radiation Design Analysis

FPGAs have been shown to operate reliably within harsh radiation environments by employing single-event upset (SEU) mitigation techniques, such as configuration scrubbing, triple-modular redundancy, error correction coding, and radiation aware implementation techniques. The effectiveness of these techniques, however, is limited when using complex system-level designs that employ complex I/O interfaces with single-point failures. In previous work, a complex SoC system running Linux applied several of these techniques only to obtain an improvement of 14 \(\times\) in mean time to failure (MTTF). A detailed post-radiation fault analysis found that the limitations in reliability were due to the DDR interface, the global clock network, and interconnect. This article applied a number of design-specific SEU mitigation techniques to address the limitations in reliability of this design. These changes include triplicating the global clock, optimizing the placement of the reduction output voters and input flip-flops, and employing a mapping technique called “striping.” The application of these techniques improved MTTF of the mitigated design by a factor of 1.54 \(\times\) and thus provides a 22.8X \(\times\) MTTF improvement over the unmitigated design. A post-radiation fault analysis using BFAT was also performed to find the remaining design vulnerabilities.