Energy Extraction Research Articles

Mathematical Modelling and Statistical Analysis of Improved Grey Wolf Optimized Maximum Tracking for Solar Photovoltaic Energy System Under Non Linear Operational Conditions

IAs the utilization of solar photovoltaic (PV) energy systems continues to expand, the efficient extraction of energy under non-linear operational conditions becomes paramount. This research focuses on the development and enhancement of a Maximum Power Point Tracking (MPPT) algorithm, specifically tailored for solar PV systems, through the integration of Improved Grey Wolf Optimization (IGWO) techniques. The study utilizes mathematical modeling and statistical analysis to evaluate the performance of the proposed IGWO-based MPPT algorithm. This research, we first establish a comprehensive mathematical model of a solar PV energy system that accurately represents its non-linear operational characteristics, taking into account factors such as temperature variations, shading effects, and changing environmental conditions. Subsequently, we introduce the Improved Grey Wolf Optimization algorithm to optimize the MPPT process, aiming to enhance energy extraction efficiency by dynamically adapting to varying conditions. The statistical analysis includes the comparison of the IGWO-based MPPT algorithm with conventional MPPT methods, such as Perturb and Observe (P&O) and Incremental Conductance (IncCond), under various non-linear operational scenarios. Key performance metrics, including energy conversion efficiency, response time, and tracking accuracy, are thoroughly evaluated to assess the algorithm's effectiveness in real-world conditions. The results of this study demonstrate the superior performance of the IGWO-based MPPT algorithm in enhancing the energy harvesting capabilities of solar PV systems under non-linear operational conditions. The proposed approach not only improves the overall energy conversion efficiency but also reduces the adverse effects of environmental variables on the system's performance. In conclusion, the integration of Improved Grey Wolf Optimization into the MPPT process represents a promising advancement in the field of solar photovoltaic energy systems. The mathematical modeling and statistical analysis conducted in this research provide valuable insights into the practical benefits of this approach, paving the way for more efficient and reliable solar energy utilization in the future.

Single inductor multi-PZTs SECE and electromagnetic voltage multiplier rectifier hybrid interface circuit

This paper proposes a single inductor multi-piezoelectric transducers (PZTs) SECE and electromagnetic voltage multiplier rectifier hybrid interface circuit (MP-SECE-VMR), which harvest energy from multi-input PZTs and electromagnetic generator (EMG). The MP-SECE-VMR adopts a voltage multiplier rectifier circuit, utilizing the diode-connected MOSFET configuration which used as diodes to effectively reduce voltage losses during rectification. Experimental tests confirm that this circuit efficiently extracts energy from PZTs despite differences in their phase relationships. The low input voltage from the EMG is effectively elevated through the voltage multiplier rectifier, enabling simultaneous extraction with the PZTs. The proposed MP-SECE-VMR circuit extracts 1.2 mW of power from two PZTs with open-circuit amplitudes of 9 V and 11 V respectively, as well as from an EMG input with an open-circuit amplitude of 3 V and a frequency of 5 Hz. Furthermore, the proposed circuit effectively enhances output power while expanding the working load range compared to single-source energy extraction.

An analytical analysis of vibrational energy harvesting using piezoelectric energy harvester in a fixed wing unmanned aerial vehicle

Fixed-wing unmanned aerial vehicles (UAVs) in the modern day have widespread applications in various reconnaissance, agriculture, military, and civilian operations. Their wide domain of application has placed the development of drone technology at the forefront. The energy harvesting in UAVs seems promising since it not only has the ability to lengthen flying time but also guarantees that no appreciable weight is added. The current article explores the concept of placing piezoelectric material patches on the UAV wing in order to extract energy from the vibration of the wing. This study uses a UAV's fixed NACA 2412 wing to harvest vibration energy by finding the location and placing a piezoelectric patch where it will produce the most voltage. The mode shapes generated are used to get the appropriate location to place the piezoelectric patch. The fixed-wing of a UAV with a piezo patch placed is subjected to a harmonically varying pressure load of 213.934 Pa and the behavior of the wing and its frequency response is analyzed in terms of displacement and voltage as output. The maximum voltage produced by the single piezoelectric patch is found about 0.11 V at the first mode shape of the wing. Embedding and increasing the patch at a location of high displacements help to harvest more energy and can be utilized for other purposes.

Achieving optimum power extraction of wave energy converters through tunable mechanical components

Wave energy converters (WECs) play a significant role in harnessing the vast potential of marine renewable energy. To enhance the power extraction of WECs, it is necessary but challenging to design the parameters of the WECs for the time-varying wave conditions. This research explores the utilization of tunable mechanical components within both the power take-offs (PTO) and wave capturing structures. We first briefly review the tunable mechanisms and then conduct a theoretical analysis of their applications for maximizing power extraction under regular and irregular wave conditions. The study investigates the impact of PTO stiffness and inertance on power extraction through an analytical approach. The results reveal that both parameters exhibit a monotonic effect within specific frequency ranges, and showed the optimum power extraction can be achieved through the tunable mechanical components. Furthermore, the research highlights the importance of designing the frequency tuning limit for two-body WECs to coincide with the desired wave conditions, as it enables all PTO parameters to achieve an optimal power output. Based on the analysis, the paper gives insightful suggestions on the design of PTO and WEC systems, including mass ratio between the two bodies, mooring stiffness, and other relevant parameters. It is found that the tuning through the mechanical component can be significant for the single-body WEC yet less effective for the two-body WEC especially at irregular wave conditions.

A predictive machine learning model for estimating wave energy based on wave conditions relevant to coastal regions

Growth and expansion in construction has increased recently and especially in coastal areas. In Alexandria, Egypt, mega projects such as El-Max Port Project (Middle Port), Port of ABU QIR (EG AKI), hotels, and restaurants were spread along the coastal lines, thus, it will need a high electrical energy. Although, the great economic benefits of such projects, it will have some negative impacts, such as overloading on the present grid. According to recommendations of COP 27, Egypt is one of the countries targeting to increase the dependency on green energy to minimize the production of greenhouse gases. This study is interested in wave energy as a renewable source of energy. Using a machine learning model that predicts wave height and wave period through the year 2030 in three separate places (Alamein, Alexandria, and Mersa-Matruh), this study will try to estimate the future amount of wave energy along Egypt's coast. Hourly measurements of the significant height and the mean wave period for the period 1979–2023 have been utilized for this. An extractor for wave energy can also be built on the Overtopping Breakwater for Energy Conversion (OBREC) in order to use this energy to fill the hole in the electric grid. The machine learning model was developed using hourly wave height and period data from three buoys, and as a result, the results have a root mean square error (RMSE) of 0.52. The amount of energy taken, wave power, and system efficiency at each place were then fully determined using a mathematical model for each of the three locations. The area along the coast of Alamein had the highest energy extraction rates, followed by Alexandria and Mersa-Matruh in that order. The results of the mathematical model indicate that the yearly power generation for Alamein, Alexandria, and Mersa-Matruh is 25287 MWhr, 14713 MWhr, and 4865 MWhr, respectively.

Interplay between particle size and microbial ecology in the gut microbiome.

Physical particles can serve as critical abiotic factors that structure the ecology of microbial communities. For non-human vertebrate gut microbiomes, fecal particle size (FPS) has been known to be shaped by chewing efficiency and diet. However, little is known about what drives FPS in the human gut. Here, we analyzed FPS by laser diffraction across a total of 76 individuals and found FPS to be strongly individualized. Contrary to our initial hypothesis, a behavioral intervention with 41 volunteers designed to increase chewing efficiency did not impact FPS. Dietary patterns could also not be associated with FPS. Instead, we found evidence that human and mouse gut microbiomes shaped FPS. Fecal samples from germ-free and antibiotic-treated mice exhibited increased FPS relative to colonized mice. In humans, markers of longer transit time were correlated with smaller FPS. Gut microbiota diversity and composition were also associated with FPS. Finally, ex vivo culture experiments using human fecal microbiota from distinct donors showed that differences in microbiota community composition can drive variation in particle size. Together, our results support an ecological model in which the human gut microbiome plays a key role in reducing the size of food particles during digestion. This finding has important implications for our understanding of energy extraction and subsequent uptake in gastrointestinal tract. FPS may therefore be viewed as an informative functional readout, providing new insights into the metabolic state of the gut microbiome.

Geothermal Solutions for Urban Energy Challenges: A Focus on CO2 Plume Geothermal Systems

The utilization of geological formations, distinguished by natural porosity and permeability and protected by low-permeability caprock, has emerged as an effective strategy for carbon dioxide (CO2) storage. This method significantly contributes to mitigating anthropogenic greenhouse gas emissions and addressing the challenges of climate change. Recent research has unveiled the potential of CO2 to enhance geothermal heat energy extraction in geothermal reservoirs by acting as a subsurface heat exchange fluid. This review paper explores the viability of CO2 in augmenting geothermal heat energy extraction, comparing it to conventional water-based geothermal systems. Special emphasis is placed on CO2 plume geothermal (CPG) systems, characterized by rapid deployment and long-term utilization of geothermal energy resources. With the overarching objective of establishing net-zero energy communities, the analysis of such systems offers a comprehensive understanding of their features, providing a fresh perspective on extracted energy within the context of energy supply in integrated, sustainable energy in built systems. Notably, these systems demonstrate efficacy in meeting the power requirements of an energy community, spanning both distinct heating and electricity needs. However, the key challenge lies in selecting suitable locations. This scientific review aims to comprehend the characteristics of CPG under specific temperature and pressure conditions while optimizing subsurface permeability. This insight is pivotal for identifying future locations for CPG operations with the intent of powering small energy communities.

Dual-function flapping hydrofoil: Energy capture and propulsion in ocean waves

Bionic flapping hydrofoils can be utilized for either energy extraction or propulsion, which has attracted the interest of many researchers. This paper proposes a semi-active flapping hydrofoil device connected to a spring damper power takeoff (PTO) that can simultaneously capture wave energy and propel under ocean wave excitation. The effects of various PTO stiffnesses, PTO damping, and torsional stiffnesses on energy capture and propulsion are investigated using CFD simulation. The performance maps of power generation and propulsion are presented. Compared with the traditional semi-active flapping hydrofoil, the study discovered that the proposed dual-function flapping hydrofoil system could achieve higher overall efficiency. With increasing PTO damping, the overall efficiency initially rises and then falls. After optimizing the PTO parameters, it is possible to increase the overall efficiency by 32 %–86 %. By adjusting the PTO damping, the proportion of energy absorbed for electricity generation and propulsion can be redistributed. Larger torsional stiffness can compensate for the reduction in energy capture and has slight influence on propulsion power. The proposed flapping hydrofoil is expected to be implemented in small wave-powered marine robots, enabling wave propulsion and wave power generation simultaneously.

Transient heat transfer simulation, sensitivity analysis, and design optimization of shallow ground heat exchangers with hollow-finned structures for enhanced performance of ground-coupled heat pumps

Ground-Coupled Heat Pumps (GCHPs) are regarded as an effective technology for building energy development and residential hot water production. The essential challenges to encompass these systems in urbanized areas are the highly drilling and initial costs of GCHPs. To overcome this challenge, researchers and industries are seeking innovative solutions by focusing on optimizing the structure of ground heat exchangers (GHXs), which act as the essential component for efficient geothermal energy extraction in GCHPs. Hence, this paper introduces a comprehensive comparative numerical investigation of an innovative U-tube GHX with a hollow-finned structure for augmenting the performance of the GCHPs. This design remarkably enhances the thermal performances, reduces the thermal resistance, therefore minimizes borehole depth, reduces drilling costs, boosts GCHP's financial viability, and bolsters geothermal energy utilization. Therefore, a series of three-dimensional analyses of transient heat extraction is executed and validated using a practical field experiment performed by the authors' research group to investigate the thermal behavior of the hollow-finned U-tube GHX at different fin configurations and compare its efficacy to typical circular U-tube GHX. More so, a parametric study and sensitivity analysis are also performed to identify the influence of critical operational and design factors on the heat extraction of the proposed hollow-finned U-tube GHX compared to the typical circular GHX. The influences of groundwater flow on the transient heat extraction were also examined. Additionally, a dimensionless shape factor is introduced to assess the implications of the U-tube geometry with hollow-finned on the thermal performance of the GHXs. Furthermore, design optimization was also conducted by examining different branched-shaped hollow-fin's U-tube GHX configurations. The findings indicate that the mean heat transfer rate of hollow-finned U-tube GHX can be increased by 44.58 % compared to the conventional circular U-tube GHX. Correspondingly, the total thermal resistance of hollow-finned U-tubes GHX was reduced by 47.71 %. It also identified that the Y-shaped hollow-finned U-tube GHX was the optimal design among the investigated configurations of branched-shaped hollow-finned U-tube GHXs, demonstrating an increase of 52.64 % compared to the conventional circular U-tube GHX. Moreover, it is revealed that a lower shape factor enhances the heat transfer rate significantly. Furthermore, the optimal mass flow rate and desired number of hollow-finned were estimated as 0.80 kg/s and six fins, respectively. Conclusively, this investigation concludes that the hollow-finned U-tube GHX can greatly enhance the heat extraction rates and reduce borehole thermal resistance, which can increase the efficiency of GCHP systems.

A 3E analysis of a multi‐power generation system employing CO2, LNG, and Organic Rankine cycles

AbstractOne avenue in increasing the energy efficiency of energy systems is through utilizing the thermal energy of flue gases of industrial plants. On this thread, herein, a novel combined cascade cycle for heat recovery of flue gases of an industrial plant is proposed comprising of an organic Rankine cycle (ORC), high‐pressure transcritical CO2 cycle, transcritical CO2 cycle, and a liquefied natural gas (LNG) regasification cycle. System analysis is conducted using energy, exergy, and eco‐exergy equations. The optimization is carried out using the TOPSIS multi‐objective method. Exergy efficiency, net output work, and cost are identified as the optimization objectives. The optimization process focused on fine‐tuning variables including the vapor generator pinch point temperature, ORC turbine inlet pressure, ORC condenser pressure, and ORC condenser pinch point temperature, with optimal values gauged at 19.31°C, 29.59 bar, 1.413 bar, and 14.52°C, respectively. The preheater had the largest exergy destruction share, followed by the heat exchanger unit. The analysis showed that the ORC condenser pressure and temperature difference between two working fluids in the heat exchanger were the most critical parameters in the proposed cycle, significantly affecting the system performance. Accordingly, the exergy efficiency, net output work, and cost values in the optimal state were equal to 15.2%, 6416 kW, and 0.7457 $/s, respectively. The advantages of the proposed system include efficient heat recovery through the coupling of the multiple cycles and enhanced energy conversion pertinent to a wider range of temperatures, maximizing the overall energy extraction from the waste heat.

Synbiotics improve growth performance and nutrient digestibility, inhibit PEDV infection, and prevent intestinal barrier dysfunction by mediating innate antivirus immune response in weaned piglets.

This experiment was conducted to explore the effects of dietary synbiotics (SYB) supplementation on growth performance, immune function, and intestinal barrier function in piglets challenged with porcine epidemic diarrhea virus (PEDV). Forty crossbred (Duroc × Landrace × Yorkshire) weaned piglets (26 ± 1d old) with a mean body weight (BW) of 6.62 ± 0.36kg were randomly allotted to five groups: control (CON) I and CONII group, both fed basal diet; 0.1% SYB group, 0.2% SYB group, and 0.2% yeast culture (YC) group, fed basal diet supplemented with 0.1%, 0.2% SYB, and 0.2% YC, respectively. On day 22, all piglets were orally administrated with 40mL PEDV (5.6 × 103 TCID50/mL) except piglets in CONI group, which were administrated with the same volume of sterile saline. The trial lasted for 26d. Before PEDV challenge, dietary 0.1% SYB supplementation increased final BW, average daily gain (ADG), and decreased the ratio of feed to gain during 0 to 21d (P < 0.05), as well as improved the apparent nutrient digestibility of dry matter (DM), organic matter (OM), crude protein, ether extract (EE), and gross energy (GE). At the same time, 0.2% YC also improved the apparent nutrient digestibility of DM, OM, EE, and GE (P < 0.05). PEDV challenge increased diarrhea rate and diarrhea indexes while decreased ADG (P < 0.05) from days 22 to 26, and induced systemic and intestinal mucosa innate immune and proinflammatory responses, destroyed intestinal barrier integrity. The decrease in average daily feed intake and ADG induced by PEDV challenge was suppressed by dietary SYB and YC supplementation, and 0.1% SYB had the best-alleviating effect. Dietary 0.1% SYB supplementation also increased serum interleukin (IL)-10, immunoglobulin M, complement component 4, and jejunal mucosal IL-4 levels, while decreased serum diamine oxidase activity compared with CONII group (P < 0.05). Furthermore, 0.1% SYB improved mRNA expressions of claudin-1, zonula occludens protein-1, mucin 2, interferon-γ, interferon regulatory factor-3, signal transducers and activators of transcription (P < 0.05), and protein expression of occludin, and downregulated mRNA expressions of toll-like receptor 3 and tumor necrosis factor-α (P < 0.05) in jejunal mucosa. Supplementing 0.2% SYB or 0.2% YC also had a positive effect on piglets, but the effect was not as good as 0.1% SYB. These results indicated that dietary 0.1% SYB supplementation improved growth performance under normal conditions, and alleviated the inflammatory response and the damage of intestinal barrier via improving innate immune function and decreasing PEDV genomic copies, showed optimal protective effects against PEDV infection.

Cryogenic fracturing using liquid nitrogen on granite at elevated temperatures: a case study for enhanced geothermal systems in Kazakhstan

Cryogenic fracturing using liquid nitrogen (LN2) is a novel stimulation technology that enhances porosity, permeability, and rock-fluid contact area in subsurface formations targetted for geothermal energy extraction. In our experimental study, granite cores collected from the Zhylgyz region in South Kazakhstan were equilibrated at various elevated temperatures before treatments involving LN2 exposure time. Compression, Brazilian, and fracture toughness tests were performed on granite with starting temperatures ranging from 100 to 500 °C to quantify the impact of initial temperature on cryogenic fracturing and to compare with baseline geomechanical tests at 50 °C without LN2 exposure. The results show that LN2 cooling of hot granite induces mechanical rock failure and permeability enhancement. Moreover, the degree of thermo-fracturing augments with initial granite temperature, total freezing time, and number of freezing–thawing cycles. The peak load before failure of granite specimens, both in compression and Brazilian tests, reduces with the increased sample temperature difference and length of LN2 treatment. The fracture toughness of our semi-circular bend (SCB) LN2-treated specimens diminished with increasing temperature difference between granite and boiling point. In both experimental LN2 treatment processes, the specimens with an initial temperature of 500 °C before LN2 treatment formed many new fissures and extensions of pre-existing ones, showing that the plastic behavior is augmented. While cryo-fracturing experimental confirmation is recommended with site-specific samples in planning geothermal operations, these results in our work indicate a threshold downhole temperature, e.g., > 300 °C, for enhanced stimulation outcomes.

Quasiparticle Poisoning of Superconducting Qubits from Resonant Absorption of Pair-Breaking Photons.

The ideal superconductor provides a pristine environment for the delicate states of a quantum computer: because there is an energy gap to excitations, there are no spurious modes with which the qubits can interact, causing irreversible decay of the quantum state. As a practical matter, however, there exists a high density of excitations out of the superconducting ground state even at ultralow temperature; these are known as quasiparticles. Observed quasiparticle densities are of order 1 μm^{-3}, tens of orders of magnitude greater than the equilibrium density expected from theory. Nonequilibrium quasiparticles extract energy from the qubit mode and can induce dephasing. Here we show that a dominant mechanism for quasiparticle poisoning is direct absorption of high-energy photons at the qubit junction. We use a Josephson junction-based photon source to controllably dose qubit circuits with millimeter-wave radiation, and we use an interferometric quantum gate sequence to reconstruct the charge parity of the qubit. We find that the structure of the qubit itself acts as a resonant antenna for millimeter-wave radiation, providing an efficient path for photons to generate quasiparticles. A deep understanding of this physics will pave the way to realization of next-generation superconducting qubits that are robust against quasiparticle poisoning.

Asymmetric Evaporation for Efficient and Simultaneous Extraction of Freshwater, Salt, and Electrical Energy from Seawater

The simultaneous extraction of freshwater, salt, and energy from seawater using solar interfacial evaporation methods still faces significant challenges. Here, a novel asymmetric evaporation model is proposed. This asymmetric evaporation...

EFFICIENCY OPTIMIZATION OF OWC WAVE ENERGY CONVERTERS BY INCIDENT FLOW STEERING

In recent years, the interest in capturing wave energy has increased notably due to the immense potential available and the need to deepen and diversify the use of renewable energies. Oscillating Water Column (OWC) technology is one of the most technologically developed, with the world's first grid-connected demonstration plant located in Mutriku. However, the efficiency of this technology is still insufficient for its consolidation in the energy mix. Therefore, the present work presents an advance in the increase in the extraction of energy from the incident waves through the installation of a frontal ramp that directs the wave flow towards the vertical chamber of the oscillating column. The improvement achieved will be determined by means of a CFD (Computational Fluid Dynamics) 2D scaled model, which represents the interaction of the structure with different incident wave states. Different geometric options of the ramp are analyzed in comparison with the usual vertical wall option where the phenomenon of pure reflection occurs. This work aims to contribute to improving the efficiency of OWC technology, favoring the use of wave energy as a renewable energy source. Keywords: Oscillating Water Column (OWC), wave energy converter (WEC), Response Amplitude Operator (RAO), Computational Fluid Dynamics (CFD), wave energy

Hydrodynamic responses and layout optimization of wave energy converter arrays consisting of five-degree-of-freedom truncated cylinders in front of a vertical wall

The hydrodynamic responses and layout optimization of a group of cylindrical wave energy conversion devices (WEC) in front of a fully reflecting vertical wall are investigated. Each truncated floating cylinder can oscillate with five degrees of freedom, i.e., surge, sway, heave, roll, and pitch. Based on the linear water wave theory, an analytical solution is developed for the hydrodynamic problem. The results of specific parameter studies suggest that the wall reflection effect significantly improves the energy extraction performance of the WEC array with the appropriate parameter conditions. A multi-level optimization method based on a genetic algorithm is developed. This paper investigates the optimal layout of the six WEC arrays, composed of 2–7 buoys, respectively. Additionally, the impact of other degrees of freedom (DOFs), besides the heave mode, on the hydrodynamic performance of the array is investigated. For β ≤ π/12, there is no need to consider the impact of other DOFs on the energy extraction in heave mode. The dimensionless amplitudes of other DOFs gradually decrease as the equivalent constraint stiffness increases. For k0a &amp;gt; 1.0, the heave amplitude and energy capture performance of the WEC array are significantly smaller. However, the amplitudes of other DOFs still have considerable magnitudes for k0a &amp;gt; 1.0. Therefore, for the sea area with high-frequency incident waves (k0a &amp;gt; 1.0), setting up a power takeoff system on other DOFs of each buoy to extract energy is a feasible solution to improve the performance of the WEC array.

Exploring the Criticality of Natural Resources Management and Technological Innovations for Ecological Footprint in the OECD Countries

ABSTRACT: The urgent imperative to confront the complex interplay between managing natural resources and fostering technological innovation, particularly in OECD countries, has become a focal point in global conversations. It is abundantly clear that critical issues such as the rampant overexploitation of our natural resources, insufficient embrace of sustainable practices, and the profound repercussions of technological advancements on our ecological footprint demand meticulous scrutiny and comprehensive action. This scrutiny is vital to guide the formulation of judicious policies and strategies capable of addressing these complex challenges. The challenges faced by OECD countries, distinguished by their advanced industrialization, and elevated standards of living, are further compounded by the depletion of natural resources resulting from extensive economic activities. The extraction and utilization of resources, encompassing water, minerals, and energy, emerge as significant contributors to ecological degradation. The heightened demand for raw materials to sustain technological industries has precipitated the overexploitation and depletion of natural resources, manifesting in activities such as mining, deforestation, and other extraction processes, leading to habitat destruction and biodiversity loss. Furthermore, the manufacturing and utilization of technology, particularly within industries heavily reliant on non-renewable energy sources, have been substantial contributors to pollution and greenhouse gas emissions. The study assesses the dynamic relationship between natural resources, economic growth, and technological innovation with respect to ecological footprints. It analyses the annual data series of a panel of 20 organisation for economic cooperation and development countries using the second-generation cointegration panel and cross-sectional autoregressive distributed lag methodology. The results of the slope coefficient confirm the existence of slope heterogeneity among countries. Furthermore, it affirms the long-term relationship among variables. Overall, the findings highlight the importance of effective utilisation of resources while investing in technological innovation to attain sustainable development goals.

A pulser R&D for the HEPS booster bumper magnet

The High Energy Photon Source (HEPS) is a fourth generation photon source, including a storage ring, a booster ring and a Linac. Due to the small dynamic aperture of the storage ring, a novel on-axis swap-out injection scheme was chosen. Here, the 6GeV booster acts as an accumulating ring during that injection process. To extract 6 GeV beam from the booster before injection into the storage ring, four slow bumper magnets are applied to assist the extraction kicker to accomplish. The bumper pulse magnetic field waveform is a half-sine wave with 1ms pulse bottom width. Depending on the simulation and test, a classic LC resonance circuit topology with IGBT switching in series with fast recovery diodes is adopted. In addition, an energy recycle circuit and capacitor charging circuit are designed, to decrease power loss and reduce the influence on the output pulse current waveform during the capacitor re-charge process. A pulsed power supply prototype has been completed, and the testing results show that the bumper pulser can fully meet the all requirements of HEPS booster high energy extraction system.

Performance Evaluation of a Mini–Vertical Axis Cross Flow Helical Turbine meant for Energy Extraction from Dam’s Tailrace

Performance Evaluation of a Mini–Vertical Axis Cross Flow Helical Turbine meant for Energy Extraction from Dam’s Tailrace

A Synchronous Current Inversion and Energy Extraction Circuit for Electromagnetic Energy Harvesting Enhancement

A Synchronous Current Inversion and Energy Extraction Circuit for Electromagnetic Energy Harvesting Enhancement