A numerical model of the cantilever bending structure of a geosynthetic encased stone column (GESC) of length 3 m and diameter 0.3 m was established using Z-Soil. The aim was to analyze the stress distribution and bending characteristics of the GESC under a bending load and to investigate the impact of encasement strength, encasement stiffness, gravel friction angle, and diameter on the bending characteristics of the GESC. The maximum bending moment of the GESC under bending conditions occurs at the anchored end. The dividing line of tensile and compressive stresses on the gravel in the anchored end section after bending failure appears at a radius of 0.5 of the column above the section centerline. The geosynthetic sleeve exhibits good resistance to tensile stress. The dividing line between the tensile and compressive stresses is located at the centerline of the section. The mechanical properties of the encasements and gravel has a significant impact on bending characteristics of the GESC. Increasing the strength of the encasement and friction angle of the gravel may significantly improve the bending capacity of the GESC, whereas an increase in the stiffness of encasement and diameter of the column decreases the bending deformation of the GESC.