Enamel Microabrasion Research Articles

Comparison of resin infiltration and microabrasion in the treatment of enamel caries

The study compared the efficacy and stability of resin infiltration and microabrasion therapeutic effect in patients with enamel caries. Materials and methods. The study included 80 patients with caries in white or pigmented spot stage on the vestibular surface of the anterior teeth. 40 patients underwent microabrasion, 40 — resin infiltration. Patients were evaluated initially, after oral hygiene, after the procedure, and 1 year later, the intensity of dental caries according to the patient hygiene performance index (PHP), gingival sulcus bleeding index (SBI), community periodontal index (CPI) and hyperesthesia level. Results. In both groups the effect was evaluated in 2 subgroups: 1) with high caries resistance and non-increased tooth sensitivity; 2) with high and medium caries resistance and increased tooth sensitivity. After microabrasion, the greatest changes were observed for hyperesthesia in patients with increased tooth sensitivity (p<0.0001 compared with the baseline and the infiltration group). PHP and CPI measures improved significantly in both microabrasion and infiltration groups. After the procedure microabrasion effectiveness was 75%, caries infiltration — 50%. After a year, relapse was recorded in 5 (12.5%) patients in the microabrasion group and in 28 (70%) people in the infiltration group (p<0.0001). Conclusions. Enamel resistance and tooth sensitivity should be considered while choosing treatment method for enamel caries. For patients with high enamel resistance and lack of dentin hyperesthesia, microabrasion is appropriate followed by remineralizing therapy. For teeth with moderate enamel resistance and dentin hyperesthesia, the combined method is recommended: resin infiltration with remineralizing therapy, followed by enamel microabrasion.

Microabrasion of enamel as a conservative solution and minimally invasive for a dental aesthetic: review of literature on the employed techniques

The aesthetic changes caused by the color change of the dental elements present as the main complaints in the dental offices and represent a challenge for dentists. Enamel microabrasion is a safe, easy-to-use, conservative technique that, when properly applied, is a good alternative for the treatment of superficial enamel stains. The technique is based on the concomitant use of an acid with abrasive agent applied on the affected dental surface. The objective of this study is perform a literature review, to discuss the state of the art and the different techniques employed. The databases Pubmed, Scielo, Bireme, Lilacs, Google Scholar and Periodicos Capes were used to search for articles on the subject, published in the last twenty five years. Over the years different abrasive substances, types and concentrations of acids were used. Currently, 6% hydrochloric acid combined with silicon carbide or 37% phosphoric acid associated with pumice stone are the most commonly used products for performing the technique. In both, the aesthetic results are satisfactory, with little dental wear, safety of application, regularization of the enamel structure and recovery of the color pattern, meeting the expectations of the patient. Thus, it can be said that the use of enamel microabrasion should be the technique of first choice when a minimally invasive approach is desired.

Management of dental fluorosis by amodified treatment strategy amidst a global pandemic

In recent months, the dental treatment scenario has changed due to the outbreak of the Covid 19 pandemic. Most of the aerosol generating procedures have been avoided. This case report, describes a conservative, less aerosol generating and cost-effective treatment modality, for the immediate aesthetic management of moderate fluorosis using enamel microabrasion technique.

Resolution of a fluorosis case through the association of minimally invasive techniques

Color changes may interfere with smile balance and they represent a clinical challenge to dentists. Dental fluorosis originates from intrinsic factors and it is a disorder of enamel formation during the phase of teeth development, resulting in the change of enamel color. This clinical case report aimed to present the resolution of a case of dental fluorosis through the association of minimally invasive techniques, namely microabrasion and tooth bleaching. A 27-year-old male patient sought the dental clinic of the School of Dentistry of Piracicaba (FOP - UNICAMP, Brazil) presenting striped and symmetrical white stains and generalized chromogenic biofilm. After anamnesis and clinical examination, the patient was diagnosed with fluorosis stains. Initially, adequacy of the oral environment was performed with prophylaxis and supragingival scraping. Then, the enamel microabrasion technique was performed with 6% hydrochloric acid associated with silicon carbide (Whiteness RM - FGM) and supervised at-home bleaching was performed with 16% carbamide peroxide (Whiteness Simple 16% - FGM). In conclusion, the treatment performed reestablished the aesthetics and harmony of smile color with minimally invasive procedures without causing tooth sensitivity.

REVIEW OF MODERN APPROACHES TO DENTAL FLUOROSIS MANAGEMENT

Dental fluorosis is caused by ingesting too much fluoride while the teeth are developing. Poltava region belongs to Buchach fluorine hydrogeological province which ground waters are characterized by a high content of fluorine. Such districts as Myrgorod, Lubny, Gadyach, Globino, Mashivka, Shyshaky and Novy Sanzshary have fluoride concentration in drinking water from 2,5 tо 7 mg/l. It is known that the overdose of fluoride has deleterious effect on enamel development, generating a hypomineralized porous subsuperfacial enamel. Mild fluorosis transforms into moderate fluorosis with brown pigmentation over time and increasing the severity of fluorosis is associated with increasing the patient`s dissatisfaction.&#x0D; There are a few different ways that dental fluorosis can be treated. Local remineralisation therapy is the most careful way to reduce or eliminate fluorosis spots. Enamel microabrasion removes the outer porous enamel with pumice after it has been partly demineralized by the acid; topical fluoride that remineralized the enamel follows microabrasion. A teeth whitening can return teeth to their former glory in a single visit. Infiltration technique is the novel approach to fluorosis management which masks white spots. Veneers or crowns are the next option that restores teeth gleaming appearance. Unfortunately, previous reviews that have analyzed contemporary methods of fluorosis treatment didn’t determine their indications depending on the disease severity and the enamel maturation.&#x0D; Purpose of the study was to systematize the methods of dental fluorosis management offered last years and to determine the indications for their use depending on the severity of the disease and the maturity of the tooth enamel. Searching strategy for identification of scientific publications published between the years 2009 - May 2019 was conducted by reviewers independently through Google. The search strategy included keywords "dental fluorosis management", «teeth whitening», «teeth microabrasion», «infiltration for fluorosis treatment» and it was complementated by checking references of the relevant review articles and the eligible studies for additional useful publications.&#x0D; Over the last 10 years few articles were dealt with minerals, vitamins, adaptogens, antitoxicants prescription for fluorosis management. Such tooth pastes as «R.O.C.S» and «Novyi zhemchuh calcium» showed efficacy in local remineralisation therapy of fluorosis in children. Infiltration technique was used for mild fluorosis management and in combination with whitening for moderate fluorosis treatment in children. Different tooth whitening techniques were offered and only some of them include local remineralisation therapy that can stabilize clinical result. Carbamide and orthophosphoric acid were utilized for whitening of immature fluorosis teeth. Microabrasion in children's teeth was effective in combination with following fluoridation, for example Tooth Moose.&#x0D; Direct and indirect restorations are considered the treatment of choice for moderate to severe cases of fluorosis given the optimum aesthetics, wear resistance, biocompatibility, and long-term results. Whereas veneers and crowns are indicated in mature fluorosis teeth, choice of direct composite restorations doesn’t depend on tooth maturity.&#x0D; Treatment of fluorosis of various severities in children should include endogenous use of medicines that increase the enamel remineralisation. Local remineralisation therapy is indicated for mild fluorosis in immature teeth and for moderate fluorosis in combination with bleaching and microabrasion. Infiltration technique is recommended for mild fluorosis management and in combination with whitening for moderate fluorosis treatment in children. In the case of inefficiency of minimally invasive methods or severe fluorosis, direct or indirect restorations are conducted. Promising direction in fluorosis treatment is the development of new methods for fluorosis management, including general and local remineralization therapy, as well as infiltration technique.

Influence of three treatment protocols for dental fluorosis in the enamel surface: an in vitro study

Introduction: Dental fluorosis is an enamel alteration characterized with opaque stains caused by high exposures to fluoride during the dentition development. Aim: This in vitro study aimed to evaluate changes in the enamel surface of sound human teeth after three treatment protocols for dental fluorosis: microabrasion with 37% phosphoric acid and pumice, home bleaching with 10% carbamide peroxide, and a combination of these techniques. Methods: Thirty-eight specimens (5×5×2 mm) with enamel surface were obtained from 19 third molars. Thirty six specimens were randomized into three treatment groups (n= 12): MAB- enamel microabrasion; CP10- home bleaching; MAB+CP10- a combination of these techniques and two specimens not received treatment. Surface roughness and microhardness analyses were performed before and after treatment protocols. Two representative specimens from each group were evaluated by scanning electron microscopy (SEM). Analysis of variance and Tukey’s tests were used for data analysis (p< 0.05). Results: All treatment protocols promoted an increased in enamel surface roughness (p< 0.02). MAB and MAB+CP10 showed a significant increase in the enamel microhardness (p< 0.04), while CP10 showed a microhardness lower than MAB and MAB+CP10 (p< 0.05). SEM images demonstrated a smoother surface from MAB and MAB+CP10 and, an irregular pattern of enamel erosion from CP10. Conclusions: The treatment protocols for dental fluorosis tested significantly changed the enamel roughness, microhardness and micromorphology.

Enamel microabrasion: achieving aesthetic success to dental fluorosis in a single session – one-year follow-up

OBJECTIVE: To describe the enamel microabrasion technique used to treat the patient with white stains due dental fluorosis, highlighting the importance of complete anamnesis and clinical examination to achieve the clinical success.CASE DESCRIPTION: patient’s complains, aesthetic self-perception, age, general health, history of excessive intake of fluoride and time of teeth development were considered to the diagnosis and treatment plan. Also, dental trans illumination was used to evaluate the white spots diffusion and estimate the lesion’s length. An abrasive paste mixture of equal parts 37% phosphoric acid and pumice was applied with a wooden spatula in order to perform enamel microabrasion. After the last application, the teeth were polished with finishing discs and a neutral sodium fluoride gel was applied to enamel remineralization. Satisfactory results in the aesthetic improvement were possible with a minimally invasive and cost-effective technique. The dental trans illumination after treatment showed the disappearance of the enamel opacities, preserved on the one-year follow-up.CONCLUSION: Cosmetic dentistry has been increasingly practiced today. However, a correct aesthetic planning should be based on current restorative dentistry concept. For any type of procedure, the dentist should opt for sound tooth structure preservation. This technique might be an efficient alternative to restorative treatments and can be considered a successful procedure. In cases of esthetic alterations due fluorosis, non-invasive methods such enamel microabrasion should be considered before invasive restorative treatments.

Dental hypomineralization treatment: A systematic review.

Defects in the maturation stage of amelogenesis result in a normal volume of enamel but insufficient mineralization, called hypomineralization. Molar-incisor hypomineralization (MIH), amelogenesis imperfecta and dental fluorosis (DF) are examples of such defects. To evaluate the effectiveness of the treatments applied to the different forms of dental hypomineralization. PubMed, Scopus, Cochrane Library, Web of Science, and Embase were screened. The research was limited to studies published in English, Spanish, and Portuguese, until May 30, 2018. The research question was formulated following the Population, Intervention, Comparison, Outcome strategy. The quality of the methodology of each article was evaluated employing the Cochrane Handbook for Systematic Reviews. From the initial research, 7895 references were obtained, of which 33 were included in the systematic review. The following treatments were reported: desensitizing and remineralizing products, resin infiltration, restorations, fissure sealants, tooth bleaching, enamel microabrasion and calcium, and vitamins supplements. Although the results are suggestive, there is a clear need for a greater uniformity of the methodologies, thus allowing for the development of clinical guidelines. Nevertheless, it was possible to identify several effective treatments for teeth with MIH (arginine pastes or fluoride varnishes) and DF (tooth bleaching and/or enamel microabrasion). Because MIH, amelogenesis imperfecta, and DF are commonly seen in dental daily practice, it is extremely important to analyze the literature regarding its treatment.

Dental Fluorosis Treatment Can Improve the Individuals’ OHRQoL? Results from a Randomized Clinical Trial

This study aimed to evaluate the effect on oral health-related quality of life (OHRQoL) of two treatment protocols for dental fluorosis in individuals enrolled in a randomized clinical trial. Seventy volunteers, who lived in a fluorosis endemic area in Brazil, and had at least four maxillary anterior teeth showing fluorosis with a Thylstrup and Fejerskov index from 1 to 7, were randomized into two treatment groups (n= 35): GI- enamel microabrasion; or GII- microabrasion associated with at-home bleaching. Microabrasion was performed using 37% phosphoric acid and pumice, and at-home tooth bleaching with 10% carbamide peroxide in a tray. Volunteers completed a questionnaire at baseline and 1-month post treatment to assess changes in OHRQoL, using the Oral Impact on Daily Performance (OIDP). Differences in overall impact scores between and within treatment groups were analyzed with Wilcoxon (within) and Mann-Whitney (between) tests. Changes in performance scores were analyzed using Wilcoxon tests (a< 0.05). One month after treatment, subjects reported improvement in OHRQoL. Both groups showed lower OIDP scores (p< 0.001), but there was no difference between them. Eating, cleaning teeth, smiling and emotional state performance scores were lower after treatment for the whole sample. In conclusion, the treatment with microabrasion improved the OHRQoL in this sample of individuals living in a fluorosis endemic area regardless of the addition of at-home bleaching.

A combination technique of microabrasion and remineralizing agent for treatment of dental fluorosis stains

Dental fluorosis leads to staining of the teeth which ranges from mild to moderate to severe grade. Mild-to-moderate fluorosis stains present over the anterior teeth gives an unaesthetic and unpleasant smile. In such conditions, enamel microabrasion could be a conservative approach which helps in rehabilitation of the esthetics with minimal enamel loss. Topical application of remineralizing agents after microabrasion enhances remineralization and reduces postoperative effects. The present case report of an 11-year-old boy describes the treatment of fluorosis stains with microabrasion in combination with topical application of casein phosphopeptide–amorphous calcium phosphate cream. The results show the benefit of the combination of microabrasion with remineralizing agent.

Concealment effect of resin infiltration on incisor of Grade I molar incisor hypomineralization patients: An in vivo study.

Context:Molar incisor hypomineralization (MIH) is a commonly occurring esthetic setback among patients. Depending on the graveness of the lesion, esthetics of MIH can be improved by treatments such as enamel microabrasion, bleaching, composite resin bonding, and the combination of some or all of these techniques.Aim:The aim of this study is to evaluate the esthetic results of resin infiltration treatment on incisors with Grade I molar incisor MIH.Materials and Methods:A total of 22incisor lesions with MIH were infiltrated with resin. Photographs were captured before infiltration, just after infiltration, and 6 months after infiltration. The photographic evaluation was done by the CIE L*a*b* scoring method. The means of each parameter such as ΔL and ΔE were calculated.Statistical Analysis:ANOVA in conjunction with Turkey's post hoc test was used to evaluate the means.Results:The total color change observed was equal just after treatment and 6 months after treatment, with no statistically significant difference (P = 0.87) between these two time points. The mean of difference in total color change (ΔE3) of white tooth discoloration was 13.2 SD 6.8, showing an overall color change.Conclusion:Infiltration can conceal the white opaque appearance of Grade I MIH lesions, and also reduction in lesion whiteness is seen with time.

Impact of Microabrasion on the Effectiveness of Tooth Bleaching.

The aim of the present study was to evaluate the effect of prior microabrasion on the teeth color change and tooth bleaching effectiveness. Eight sound molars were mesio-distally sectioned and the halves were randomly allocated to receive enamel microabrasion or non-abrasion (control) in one of surfaces (buccal or lingual), while the remaining surface received the other treatment. The tooth color on baseline was evaluated by spectrophotometer (CieL*a*b system). After the microabrasion procedure, the tooth color was measured again. Following, the specimens were bleached with 35% hydrogen peroxide for two sessions with one-week interval. The color was re-evaluated 7 days after each section and 30 days after the second session. The effect of enamel microabrasion on color changes was evaluated by paired T-test. Deltas L*, a*, b*, and E were calculated and data submitted to 2-way repeated measure ANOVA followed by Tukey`s test. Paired T-test was also used to assess possible differences on the ultimate color achieved after tooth bleaching. Enamel microabrasion reduced the lightness and increased the redness of specimens. Specimens that received microabrasion presented higher values of ∆L* than control after each bleaching procedure; and higher ∆a* after the 2nd bleaching session. However, the prior enamel microabrasion did not affect the ultimate values of color parameters. Despite enamel microabrasion have modified the tooth color, this procedure did not affect the ultimate results achieved with tooth bleaching using a high-concentrated hydrogen peroxide.

Enamel microabrasion associated with resin infiltration technique: Clinical Report

The generalized presence of stain, particularly on anterior teeth, provides an unaesthetic appearance with a negative impact on the patient. The aim of this paper is to report a case of severe chromatic alterations treated with enamel microabrasion associated with infiltration of low-viscosity resin. The intense brownish pigmentation and white spots of fluorosis lose their whitish appearance and look similar to sound enamel. This association of techniques, which might be an alternative to white-masking of intense pigmentation, showed optimal aesthetic results.

Characterization of Fluorotic Enamel After Microabrasion and Desensitizing Agent

Introduction. Enamel microabrasion is a procedure used for removing a superficial layer of enamel that has some alteration of color and/or texture caused by dental fluorosis. The purpose of this study was to compare the microhardness and micromorphology of the fluorotic enamel surface after microabrasion with 6.6% hydrochloric acid and silica or 18% hydrochloric acid and evaluate the effect of desensitizing agent exposure on the treated enamel. Materials and Methods. Twenty anterior teeth with moderate fluorosis were divided into two groups: 1) Perla-Dent® group and 2) Opalustre® group. Each buccal surface of incisors was sectioned to obtain samples 3x3 mm. The samples were then mounted in acrylic blocks. The enamel surface of the blocks was polished, after the microabrasion materials and desensitizing agent were applied according to the manufacturer's instructions. All samples were analyzed by Vickers microhardness tester and scanning electron microscopy (SEM). Results. Both experimental groups presented a decrease in the microhardness values, with statistically significant differences (p&lt;0.0001) when comparing the baseline and after treatments values. To compare the microhardness values after both microabrasion and desensitizing treatment in the study groups, it was observed that the Perla-Dent® group obtained lower values than the Opalescence® group with a statistically significant difference (p&lt;0.0001). The representative images of study groups in SEM showed the enamel surface morphology after Perla-Dent® treatment more irregular and a very marked relief than that observed in enamel surface morphology after Opalustre® treatment. Conclusion. The surface of the enamel was more affected with Perla-Dent® treatment than with Opalustre® treatment and the placement of UltraEz® agent does not recover its baseline microhardness.

Characterization of Fluorotic Enamel After Microabrasion and Desensitizing Agent

Introduction. Enamel microabrasion is a procedure used for removing a superficial layer of enamel that has some alteration of color and/or texture caused by dental fluorosis. The purpose of this study was to compare the microhardness and micromorphology of the fluorotic enamel surface after microabrasion with 6.6% hydrochloric acid and silica or 18% hydrochloric acid and evaluate the effect of desensitizing agent exposure on the treated enamel. Materials and Methods. Twenty anterior teeth with moderate fluorosis were divided into two groups: 1) Perla-Dent® group and 2) Opalustre® group. Each buccal surface of incisors was sectioned to obtain samples 3x3 mm. The samples were then mounted in acrylic blocks. The enamel surface of the blocks was polished, after the microabrasion materials and desensitizing agent were applied according to the manufacturer's instructions. All samples were analyzed by Vickers microhardness tester and scanning electron microscopy (SEM). Results. Both experimental groups presented a decrease in the microhardness values, with statistically significant differences (p&lt;0.0001) when comparing the baseline and after treatments values. To compare the microhardness values after both microabrasion and desensitizing treatment in the study groups, it was observed that the Perla-Dent® group obtained lower values than the Opalescence® group with a statistically significant difference (p&lt;0.0001). The representative images of study groups in SEM showed the enamel surface morphology after Perla-Dent® treatment more irregular and a very marked relief than that observed in enamel surface morphology after Opalustre® treatment. Conclusion. The surface of the enamel was more affected with Perla-Dent® treatment than with Opalustre® treatment and the placement of UltraEz® agent does not recover its baseline microhardness.

Clinical performance of a combined approach for the esthetic management of fluorosed teeth: Three-year results.

The long-term clinical performance of combined therapy including enamel microabrasion and vital bleaching is debatable due to the abrasion of outer enamel surface. The aim of this longitudinal cohort study was to evaluate the 3-year clinical performance of enamel microabrasion in combination with vital tooth bleaching for the esthetic management of fluorosed teeth. Fifteen patients with 176 fluorosed incisors and canines were included in this study. All the teeth were treated with enamel microabrasion (Opalustre, Ultradent), and at-home bleaching technique (10% Opalescence PF, Ultradent). Fluorosed teeth were evaluated at baseline, after microabrasion, after combined therapy, and at 3-year follow-up in terms of esthetic criteria (esthetic appearance, brown stains, and opaque white areas), side effects, and patient satisfaction using visual analog scales. The data were statistically analyzed (α = 0.05). Fluorosed teeth revealed significantly better esthetic appearance after microabrasion and combined therapy and at 3-year follow-up compared to those at baseline (P P Conclusions: The combined therapy was effective in the esthetic management of fluorosed teeth. However, a significant relapse was observed in the esthetic appearance and brown stains of these patients after 3 years, which also reduced patient satisfaction.

Mineral composition of mixed saliva in patients with dental fluorosis

The aim of the study was to assess the mineral composition of mixed saliva in dental fluorosis patients undergoing treatment with microabrasion and bleaching. The study included 60 patients aged 18-35 years with various forms of dental fluorosis. Group 1 included 40 patients in which enamel microabrasion was performed, group 2 - 20 patients with microabrasion and bleaching. Mixed saliva composition was analyzed with Olimpus automatic analyzing device. Dental fluorosis treatment in both groups resulted in saliva mineral composition changed associated with enamel demineralization which proves the necessity for calcium and phosphate containing compositions in these treatment groups.

An Ex-vivo Shear and tensile bond strengths of orthodontic molar tubes bonded using different techniques.

BackgroundMolar bonding procedures need continuous improvement to be widely accepted clinically and eventually replace molar bands.Material and MethodsThe purpose of this study was to determine the effects of enamel micro-abrasion and silane coating of the base of molar tubes on shear and tensile bond strengths of orthodontic molar tubes. A total of 200 third molars were randomly allocated into five groups of 40 teeth as follows: group 1: molar tubes bonded to etched teeth (37% phosphoric acid gel; control group); group 2: molar tubes bonded to etched teeth (37% phosphoric acid) with the addition of silane to the base of molar tubes; group 3: molar tubes bonded to teeth pre-treated with 18% hydrochloric acid and pumice (micro-abrasion); group 4: molar tubes bonded to teeth pre-treated with microabrasion with the addition of silane to the base of molar tubes; group 5: molar tubes bonded to teeth pre-treated with microabrasion before conventional acid etching combined with the addition of silane to the base of molar tubes. The bond strength testing was performed using a computer control electromechanical universal testing machine.ResultsThe highest mean shear and tensile bond strengths were recorded in group 5 (13.81±2.54MPa and 13.97±2.29 MPa, respectively). Micro-abrasion alone (group 3) and the combination of enamel micro-abrasion and the addition of silane (group 4) produced bond strength values comparable to the control.ConclusionsEnamel surface pre-treatment (micro abrasion) before conventional acid etching combined with the addition of silane to the base of the molar tube produced the highest bond strengths among all tested groups. Key words:Molar, shear strength, tensile strength, orthodontic appliances.

Microabrasion and composite resin for re-establishing smile esthetics: a case report

Dental hypomineralization such as dental fluorosis has increased in recent times leading to unaesthetic appearance of teeth. There are different treatment possibilities to improve the aesthetic appearance of hypomineralized enamel described in dental literature. The enamel microabrasion has been a feasible alternative, since it is a fast, safe, conservative, and easy to perform, which promotes good esthetic results. Moreover, this technique is a conservative method that improves the appearance of the teeth by restoring bright and superficial smoothness, without causing significant structural loss. The association of different techniques, such as direct composite resin, can provide good esthetic outcomes, but the etiology, intensity, and depth of stain should be considered to minimize dental structure loss. Objective: To describe an easy technique for managing dental fluorosis using enamel microabrasion in association with direct composite resin. Case report: A mixture of hydrochloric acid and silicon carbide was applied according the manufacturer’s instructions. Subsequently, a direct composite resin was applied over the areas where the opacities were more evident. This conservative approach may be considered an interesting alternative treatment to remove fluorosis staining and to improve aesthetic appearance. Conclusion: enamel microabrasion combined with direct composite resin is a conservative and safe alternative method to treat enamel opacities from dental fluorosis. Therefore, this management provides satisfactory aesthetic results for the patient’s smile.

The Microabrasion Technique with Acrylic Bur. Case Report

Introduction: Some important factors for establishing social interactions seem to be the physical attractiveness and facial appearance, and dental color is one of the most important characteristics correlated with the aesthetics. The microabrasion is a conservative, atraumatic and non restorative technique that removes a superficial layer of enamel that has some defects of texture or color such as brown or white opacities. Case description: Case 1. A 35 year old female showed generalized TF grade 4 and 5 fluorosis. The enamel microabrasion consisted of 3 applications in the upper teeth and 2 more applications on the central incisors and on the right lateral teeth. Case 2. A 42 year old male presented TF grade 3 and 4 fluorosis. The enamel microabrasion consisted of four applications in the lower teeth and 2 applications on the upper teeth. Discussion: The success of enamel microabrasion depends on the location and depth of the enamel defect. Before treatment, patients should be informed that they may required a bonded composite restoration or a bleaching treatment, because the depth of the enamel discoloration is uncertain.