Emission Quantum Yield Research Articles

One Pot Synthesis of New Benzimidazole Derivatives with Exceptionally High Luminescence Quantum Efficiency.

There are different approaches to the synthesis of benzimidazole. In this article, five new benzimidazole derivatives, BMPO, Me-BMPO, Di-MeBMPO, F-BMPO and Cl-BMPO where (BMPO=3-[(1H)-benzo[d]imidazol-2-yl]pyridin-2(1H)-one), have been prepared. Another study was carried out on luminescence properties and their potential applications for the detection of transition metal ions. From the one-pot synthesis approach, all the derivatives of the benzimidazole compounds were obtained. The compounds were characterized using HRMS, 1HNMR, 13CNMR, and X-ray crystallography. Herein, a mechanism has been deciphered by predicting the release of HCl(g). All compounds showed a strong deep blue emission when dissolved in dimethylacetamide (DMA), with emission wavelengths at 423, 428, 435, 423, and 421 nm, and half-times of 3.64, 2.77, 2, 19, 3.42 and 3.52 ns, respectively. In addition, their emission quantum yields were determined to be 72, 50, 42, 73 and 80%. Five new benzimidazole derivatives, BMPO, Me-BMPO, Di-MeBIPO, F-BIPO, and Cl-BIPO, have been successfully synthesized by the one-pot synthesis method, and their structures are characterized and confirmed. The compounds exhibited exceptional luminescence by emitting a strong blue light in DMA with high fluorescence quantum yields between 42~80%.

Quantitative determination of Penicillamine in pharmaceutical samples by Copper-Modified Drug-Based carbon dots utilizing a turn ON-OFF-ON strategy

In the present work, a sensitive and simple method is developed for sensing and quantifying Penicillamine (PA) in pharmaceutical samples utilizing a copper-conjugated carbon dots probe. The proposed method employed a turn ON-OFF-ON strategy with carbon dots fluorescence quenching by addition of copper and fluorescence recovery of up to 91 % by addition of PA. Expired moxifloxacin tablet powder was used as a novel carbon precursor during the synthesis of the carbon dots (MOX–CDs) which involved a single-step solvothermal procedure. The prepared MOX–CDs demonstrated excitation independent yellowish green fluorescence emission (Quantum yield ≈ 51 %) with the maximum excitation and emission wavelengths being observed at 410 nm and 510 nm respectively. The suggested strategy for assaying PA offered a detection limit of 0.14 µM (S/N = 3) and a linear response from 2.5 µM to 50 µM (R2 = 0.9987). In addition to offering merits like accuracy and sensitivity, the proposed probe also provides a method for solid waste treatment by reprocessing expired moxifloxacin powder.

Structural and Photophysical Differences in Crystalline Trigonal Planar Copper Iodide Complexes with 1,2-Bis(methylpyridin-2-yl)disilane Ligands.

We synthesized trigonal planar Cu(I) iodide complexes with 1,2-bis(methylpyridin-2-yl)disilane ligands L1-L4 and investigated how the substitution position of the methyl group on the pyridine ring in σ-π conjugation affects their structure and physical properties. The structures were characterized by NMR, elemental analysis, and single-crystal X-ray diffraction. In the crystalline state, the methylpyridyl groups of CuIL1-CuIL3 were coordinated with Cu(I) in an anticlinal conformation relative to the Si-Si σ bond, whereas those of CuIL4 were coordinated with Cu(I) in a synperiplanar conformation relative to the Si-Si σ bond. The conformational difference in the crystalline state was influenced by the N-Cu-N bite angle and the emission wavelength. CuIL1-CuIL3 exhibited blue-green emission (λem: 476-494 nm), and CuIL4 exhibited green-yellow emission (λem: 512 nm) with high emission quantum yields (Φ: 0.59-0.86) in the crystalline state at 293 K. These Cu(I) complexes exhibited thermally activated delayed fluorescence from the S1 state at 293 K and phosphorescence from the T1 state at 77 K in the crystalline state. The optical properties in the crystalline state were discussed by DFT and TD-DFT calculations. These complexes also displayed aggregation-induced emission in THF-water solution (fw > 80%), although they did not show emission in dehydrated THF.

Deciphering the Influence of Zwitterionic Surfactants on Pluronic Co-assemblies: A Synergistic Odyssey through Spectroscopic, Microscopic, and Scattering Techniques.

Fundamental investigations into the photophysical properties and microenvironmental features of pluronic-zwitterionic surfactant mixed assemblies are essential for advancing our understanding of molecular interactions at the nanoscale, setting the stage for innovative solutions in drug delivery, diagnostics, and other applications of pluronic-zwitterionic surfactant assemblies. This investigation explores the intricate photophysics of pluronic-zwitterionic surfactant mixed assemblies, utilizing the twisted intramolecular charge transfer state forming styryl dye trans-2-[(4-dimethylamino) styryl] benzothiazole as a probe. By comparing the behaviors of two distinct poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) block copolymers with block composition of (PEO)132-(PPO)50-(PEO)132 [F108] and (PEO)100-(PPO)65-(PEO)100 [F127] at concentrations of 5 and 10 wt %, this study systematically examines the impact of the addition of zwitterionic surfactants. Through a comprehensive set of analytical techniques, including UV-visible absorption, steady-state emission, and time-resolved fluorescence emission studies, significant alterations in the emission spectra and quantum yields were observed upon the addition of zwitterionic surfactants. These modifications suggest a dynamic equilibrium for the transitioning of dye molecules between various microenvironments within the assemblies. Additionally, dynamic light scattering, zeta potential (ζ), nuclear Overhauser effect spectroscopy, small-angle neutron scattering, cryogenic transmission electron microscopy, field emission scanning electron microscopy, and fluorescence lifetime imaging microscopy analyses have shed light on the substantial impact of surfactant incorporation on the structural properties of assemblies.

Synthesis, structure, photo- and electroluminescent properties of methyl- and alkoxy-substituted 4-methyl-N-[2-(phenyliminomethyl)phenyl]benzenesulfamides and their zinc(II) complexes

A series of novel Zn(II) bischelate complexes based on azomethines of 2-(N-tosylamino)benzaldehyde and aromatic amines (aniline, 4-methylaniline, 4-methoxyaniline, 2-methoxylaniline, and 4-ethoxylanine) were designed and synthesized with the aim of studying their photo- and electro-luminescent properties. The structures of the synthesized azomethines and their complexes were studied by elemental analysis, infrared (IR) and proton nuclear magnetic resonance (1H NMR) spectroscopy. The structure of the Zn(II)-complexes was determined using X-ray diffraction analysis. In the solid state, azomethines exhibit bright luminescence in the yellow part of the spectrum with high emission efficiency and quantum yields of approximately 50%. Zinc complexes based on them exhibit noticeable luminescence in the solid state and in solutions of methylene chloride. Compared to azomethines, the luminescence maxima of Zn(II) complexes are hypsochromically shifted, and they exhibit pronounced blue-green luminescence. The OLED devices based on zinc(II) complexes emit strong bluish-green light with a peak maximum at 478-490 nm. The device with the best parameters has a maximum luminance of 2103 cd/m2, a current efficiency of 14.0 cd/A, and an overall efficiency of 4.8%, with a turn-on voltage of 3.6 V.

Recent Advances of Organic-Inorganic Hybrid Fluorescent Hyperbranched Polymer: Synthesis, Performance Regulation Strategies and Applications.

The organic-inorganic hybrid fluorescent hyperbranched polymer, including hyperbranched polysiloxane and hyperbranched polyborate, have attracted much attention due to their excellent optical properties and wide range of applications. Hyperbranched polysiloxane and polyborates, prepared by introducing Si or B elements into organic polymer chains at the molecular level through rational molecular design and novel synthesis methods, exhibit outstanding photophysical properties as an indispensable branch of organic-inorganic hybrid fluorescent materials. Herein, this review highlights the recent research progress on hyperbranched polysiloxanes and hyperbranched polyborates, including strategies for regulating their emission wavelengths, quantum yields, and fluorescence lifetimes, potential emission mechanisms, and various applications. Finally, some challenges and promising future directions in the field of organic-inorganic hybrid fluorescent polymers are summarized.

Understanding the Role of NHC Ditopic Ligand Substituents in the Molecular Diversity and Emissive Properties of Silver Complexes.

Silver bis(carbene) complexes featuring ditopic N-heterocyclic carbene (NHC) ligands have been synthesized which enable the assembly of supramolecular architectures via reaction with silver triflate. Through a systematic exploration of crystal structures and emissive properties, this study investigates the impact of the substituents on the NHC ditopic ligands [R-Im-2-Z-py], where R = Me, benzyl (Bz), or 2-naphthylmethyl (NaphCH2), and Z = H or Cl in the structural framework and emissive properties observed in the silver bis(carbene) or polynuclear species. Remarkably diverse structural motifs emerge in both of them, predominantly influenced by the choice of R wingtip and second by the Z substituent. Also the emissive quantum yield of the complexes is mostly governed by the selection of the R wingtip and further modulated by the Z substituent. Several of the mono and polynuclear complexes exhibit complex emissive profiles, including the observation of dual emission phenomena. Particularly noteworthy is the complex [Ag(NHC)]2]OTf (R = Bz, Z = Cl), which demonstrates an exceptionally intense single blue emission with a remarkable solid-state quantum yield (Φ) of 24%.

Green Synthesis of Luminescent Carbon Dots from Ficus benghalensis Aerial Roots for Bioimaging.

In this work, carbon quantum dots (CQDs) were prepared using a one-step hydrothermal green synthesis method from a low-cost and eco-friendly renewable biomass, specifically the Ficus benghalensis aerial roots (FB-AR). For the past two decades, CQDs have been noted for their tunable emission spectrum, quantum yield, biocompatibility, photostability, and unique optoelectronic properties such as photoluminescence (PL), and fluorescence. The synthesized Ficus benghalensis carbon quantum dots (FB-CQDs) were characterized for their physical, structural, and chemical properties using XRD, Raman, HRTEM, XPS, FTIR, TG-DTG, UV-visible, and photoluminance analysis. XPS analysis confirmed the presence of phytoconstituent functionalities and the composition of components. The FB-CQDs, which exhibit long-range emissions, have potential applications in various biological and therapeutic fields. Their bioimaging capability is tested in Escherichia coli bacteria. However, despite their promising characteristics, the FB-CQDs showed no antibacterial inhibition against Escherichia coli and Staphylococcus aureus, likely due to its carbonization temperature.

Spacer Twisting Strategy to Realize Ultrabright Near-Infrared II Polymer Nanoparticles for Fluorescence Imaging-Guided Tumor Phototheranostics.

Conjugated polymers are becoming popular near-infrared II (NIR-II) phototheranostic agents (PTAs) due to their numerous advantages, such as high photostability, large molar extinction coefficients, and excellent photothermal properties. However, the strong π-π interactions between the chains of the conjugated polymers resulted in their generally low NIR-II emission quantum yields (QY). Therefore, the synthesis of conjugated polymers with high QY is an interesting but challenging task. Herein, we proposed a spacer twisting strategy to realize ultrabright NIR-II polymer nanoparticles for fluorescence imaging-guided tumor phototheranostics. Theoretical calculations indicated that the polymer PY-IT has the largest dihedral angle between the largely π-conjugated skeleton and the spacer, which can effectively inhibit intermolecular π-π stacking, resulting in an improved QY as high as 16.5% in nanoparticles. In addition, PY-IT NPs can effectively perform NIR-II imaging and photothermal treatment of tumors. The work presents some valuable guides for achieving ultrabright NIR-II polymeric PTAs with high QY.

Observation of Three-Photon Cascaded Emission from Triexcitons in Giant CsPbBr3 Quantum Dots at Room Temperature.

Colloidal semiconductor nanocrystals have long been considered a promising source of time-correlated and entangled photons via the cascaded emission of multiexcitonic states. The spectroscopy of such cascaded emission, however, is hindered by efficient nonradiative Auger-Meitner decay, rendering multiexcitonic states nonemissive. Here we present room-temperature heralded spectroscopy of three-photon cascades from triexcitons in giant CsPbBr3 nanocrystals. We show that this system exhibits second- and third-order correlation function values, g(2)(0) and g(3)(0,0), close to unity, identifying very weak binding of both biexcitons and triexcitons. Combining fluorescence lifetime analysis, photon statistics, and spectroscopy, we can readily identify emission from higher multiexcitonic states. We use this to verify emission from a single emitter despite high emission quantum yields of multiply excited states and comparable emission lifetimes of singly and multiply excited states. Finally, we present potential pathways toward control of the photon number statistics of multiexcitonic emission cascades.

Cationic or Neutral: Dependence of Photophysical Properties of Bis-Alkynylphosphonium Pt(II) Complexes on Ancillary Ligand.

A series of D-π-A alkynylphosphonium salts with different linker between donor and acceptor groups was used to synthesize two series of trans-bis-alkynylphosphonium Pt(II) complexes with different ancillary ligands (triphenylphosphine, P series, and cyanide, CN series). The nature of the ancillary ligand manages the overall charge and emission properties of the complexes obtained. In addition, the variation of the linker in alkynylphosphonium ligands allows fine-tuning the luminescence wavelength. Dicationic series P is unstable in solution under UV excitation, whereas in the solid state, these complexes are the first example of phosphorescent trans-phosphine-bis-alkynyl Pt(II) compounds. Neutral series CN demonstrates bright emission in solution, including dual emission for 2CN complex with biphenyl linker in alkynylphosphonium ligand. However, in the solid state for the CN series drastic decrease in the emission quantum yield compared to the P series was observed. DFT calculations reveal the complicated emission nature for the both P and CN series with various contributions of 3ILCT, 3LLCT and 3MLCT states. However, in the naphthyl-containing derivatives 3P and 3CN, the dominating 3LC character with some admixture of CT states is postulated.

Controllable 1,4-Palladium Aryl to Aryl Migration in Fused Systems─Application to the Synthesis of Azaborole Multihelicenes.

Herein, we report the first 1,4-Pd aryl to aryl migration/Miyaura borylation tandem reaction in fused systems. The Pd shift occurred in the bay region of the dibenzo[g,p]chrysene building blocks, giving rise to a thermodynamically controlled mixture of 1,8- and 1,9-borylated compounds that allowed the preparation of regioisomeric azaborole multihelicenes from the same starting material. The outcome of this synthesis can be controlled by the choice of reaction conditions, allowing the migration process to be turned off in the absence of an acetate additive and the target multiheterohelicenes to be prepared in a regioselective manner. The target compounds show bright green fluorescence in dichloromethane with emission quantum yields (Φ) of up to 0.29, |glum| values up to 2.7 × 10-3, and green or green-yellow emission in the solid state, reaching Φ of 0.22. Single crystal X-ray diffraction analyses gave insight into their molecular structures and the packing arrangement. Evaluation of aromaticity in these multihelicenes revealed a nonaromatic character of the 2H-1,2-azaborole constituent rings.

Versatile Nanolights From Silicon, Carbon and Oxygen Hybrid System for Optical Applications

AbstractSilicon, carbon and oxygen hybrid nanomaterials (i.e., SiCOHNs) have recently drawn extensive attention as versatile photoluminescence (PL) nanosystems. The collective advantages of silicon‐ and carbon‐based nanostructures have resulted in SiCOHNs with tunable and photostable PL properties, abundant possibilities for surface modification, and low biotoxicity. Although SiCOHNs have shown great potential in diverse applications, such as bioimaging, biosensing, drug delivery and information encryption, discovering novel SiCOHNs with explicit nanostructures and elucidating the fundamental mechanisms of their PL properties for bioapplications are highly desirable. In this review, on the preparation of SiCOHNs on the basis of the synthesis conditions and precursors are first focused. Next, the manipulation of the emission wavelength, quantum yield and RTP of SiCOHNs is discussed. On the basis of previous reports and the recent experimental/theoretical results, the primary structure of SiCOHNs is clarified and deduced their possible PL mechanism. SiCOHNs possess bacterial uptake efficiency and/or anticancer capacity, promoting various biomedical applications and proof‐of‐concept applications in anti‐counterfeiting. Finally, current challenges and future trends are summarized as a roadmap for the development of SiCOHNs‐based optical applications.

Organic doped red room-temperature afterglow materials based on 2,3,5-triarylfuro[3,2-b]pyridines through Förster-resonance energy transfer

A series of novel 2,3,5-triarylfuro[3,2-b]pyridines are designed and acquired to be used as the guest molecules in organic doped room-temperature phosphorescence (RTP) system. Phenyl(pyridin-2-yl)methanone which can provide the rigid and tight microenvironment is chosen as the host molecule, which enables the two-component doped materials to emit RTP emissions of 0.5–8 s with 41–565 ms phosphorescence lifetimes and 2.9–19.4 % phosphorescence quantum efficiencies through constricting the non-radiative decay of triplet excitons. Furthermore, using commercial dyes Erythrosin B sodium salt and Eosin Y sodium salt as the third component and energy acceptor, the three-component materials emit bright red afterglows of 2 s with delayed lifetimes of 252–286 ms and emission quantum yields of 5.1–5.6 %, which are demonstrated to come from the triplet-to-singlet Förster-resonance energy transfer (FRET) from phosphorescence emission of 2,3,5-triarylfuro[3,2-b]pyridine derivative to fluorescence emission of commercial dye. This work not only provides valuable reference for the development of furo[3,2-b]pyridine-based afterglow materials, but also proves that the strategy of the FRET process provides new possibilities for molecules that can only emit fluorescence to participate in constructing afterglow materials.

Efficient Blue Emission in Organic–Inorganic Metal Halide (TEA)2InCl5 Triggered by Bi3+‐Doping

AbstractLead‐free 0D In‐based organic–inorganic metal halides (OIMHs) have attracted tremendous attention because of their nontoxicity, environmental stability, and excellent photoluminescence properties. However, it remains controversial and unclear whether the luminous division exists in ns2 doping In‐based materials, as the majority of In‐based materials are considered non‐luminous. Herein, a series of Bi3+‐doped (TEA)2InCl5 (TEA = tetraethylammonium) crystals are synthesized and it is determined that the blue emission stemmed from Bi ions. Remarkably, the photoluminescence quantum yield (PLQY) of the blue emission at 469 nm reached 69.69% under 371 nm excitation, exceeding those of previously reported Bi3+‐doped OIMHs. In addition, pristine and Bi3+‐doped compounds exhibited excellent structure and optical stability under humid conditions. This study provides new insights into the photoluminescence properties of In‐based OIMHs, especially regarding the high‐efficiency emission of Bi3+‐doped materials.

Raising Near-Infrared Photoluminescence Quantum Yield of Au42 Quantum Rod to 50% in Solutions and 75% in Films.

Highly emissive gold nanoclusters (NCs) in the near-infrared (NIR) region are of wide interest, but challenges arise from the excessive nonradiative dissipation. Here, we demonstrate an effective suppression of the motions of surface motifs on the Au42(PET)32 rod (PET = 2-phenylethanethiolate) by noncoordinative interactions with amide molecules and accordingly raise the NIR emission (875/1045 nm peaks) quantum yield (QY) from 18% to 50% in deaerated solution at room temperature, which is rare in Au NCs. Cryogenic photoluminescence measurements indicate that amide molecules effectively suppress the vibrations associated with the Au-S staple motifs on Au42 and also enhance the radiative relaxation, both of which lead to stronger emission. When Au42 NCs are embedded in a polystyrene film containing amide molecules, the PLQY is further boosted to 75%. This research not only produces a highly emissive material but also provides crucial insights for the rational design of NIR emitters and advances the potential of atomically precise Au NCs for diverse applications.

POE-Mediated Tunable Quantum Yield of Carbon Dots-Derived From Agapanthus Africanus (L.) Hoffmann Leaves.

The green synthesis of carbon dots (CDs) from natural sources is a challenging goal. Herein CDs are produced from Agapanthus africanus (L.) Hoffmann leaves by carbonization at 200/300 °C for 2/3h. Samples are named CZ-X-Y, where Z, X, and Y represent carbonization, temperature, and time, respectively. CZ-200-3, CZ-300-2, and CZ-300-3 CDs have average sizes of 3.7 ± 0.7, 5.3 ± 1.2, and 5.1 ± 1.6nm, respectively. Their surface, devoid of chlorophyll, contains ─OH, ─C═O, and ─C(═O)OH groups and sylvite. Isolated CZ-300-3 emits at 400nm (excited at 260nm) and exhibits an emission quantum yield (QY) value of 2 ± 1%. Embedding in the d-U(600)/d-(900) di-ureasil matrices resulted in transparent films with emission intensity maxima at 420/450nm (360nm), and QY values of 7 ± 1/16 ± 2% (400nm). The enhancement of the QY value of the bare CDs agrees withan efficient passivation provided by the hybrid host. The hydrophilic CZ-300-3 CDs also exerted a marked surface modifying role, changing the surface roughness and the wettability of the hybrid films.

Inflated electronic and optical assessment of gC3N4/ZnO nanocomposite as a potential emissive layer material for OLED application

Organo-inorganic nanocomposite materials have been proven to be novel hybrid materials with inflated electronic and optical performance that can be tailored with the judicious selection of the building units or their combinations. Here, hydrothermal, thermal polycondensation, and ultrasonication techniques were used to synthesize pure ZnO, gC3N4, and gC3N4/ZnO with varying weights % such as 10%, 15%, 20%, and 25% of ZnO inorganic filler elements in gC3N4 matrix. The crystalline phase (hexagonal wurtzite) and crystallite size (10.0 nm, 17.6 nm, and 15.90 nm) of the synthesized materials were examined by X-ray diffractometer. The FESEM and HRTEM characterizations revealed the sheet-like gC3N4 and spherical-type ZnO nanoparticle-like microstructures of the samples. The present functional groups, corresponding vibrational frequency, chemical states, and binding energy were investigated using FTIR and XPS spectroscopic methods. Optical parameters such as optical band gap energy (Eg = 3.24 eV), Urbach energy (Eu = 0.41 eV), refractive index (n= 1.99), emission quantum yield (∼ 69.03%), and color purity of the nanocomposites were examined using UV visible and photoluminescence spectroscopic techniques. IV and Hall measurements techniques were used to determine the semiconducting parameters of the optimized sample, such as conductivity (∼62.90×10−5 S/cm), carrier mobility (∼ 44.1 cm2/Volt. Sce), carrier concentrations (∼1.825×1014 cm−3), and sheet resistance (∼1.062×103 Ω/cm2). Due to their excellent optical and electrical behavior, the nanocomposite materials were found to be fairly suitable as a potential emissive layer material for OLED applications.

Golden Guardians: Advanced pH Sensors with Built‐in Antimicrobial Defense

AbstractGold nanoclusters (Au NCs) capped with a small biomolecule, namely (+)‐norephedrine, (Au@Nore) display exceptional performance as fluorescent pH sensors. They display high emission quantum yield (ΦPL of ≈33% in strongly basic media); absence of nanocluster (NC) aggregation and/or induced rigidification of the organic shell; a linear dependency of their emission on the pH in the 8.2–9.5 range; and reversible pH sensing. In addition, excitation at 310 nm, where both the NC and the ligand absorb, enables ratiometric sensing. Studies on the fungus Candida albicans and bacterium Bacillus subtilis demonstrate that while Au@Nore do not cause any impact on the growth of the fungus, it inhibited the growth of the Bacillus, showing the lowest cell viability of 18% at the highest pH values via a mechanism of action involving the disruption of the bacterial wall.

A non-symmetric room-temperature tristriazolotriazine liquid crystal

Tristriazolotriazine (TTT) has emerged as an easily accessible electron-deficient heterocyclic core for discotic liquid crystals (LCs). Materials that are liquid-crystalline at room temperature, i.e., do not crystallize in ambient conditions, are of particular interest when the LC state is prone to offer advantages in optoelectronic devices, e.g., for anisotropic charge or exciton transport, or anisotropic light emission. However, there has been no report of non-symmetric TTT LCs, i.e., with unequal arms. Here, we report two non-symmetric compounds derived from the TTT core. Their non-symmetry, combined with a high number of peripheral alkyl chains, is found to promote Colh mesomorphism over a broad temperature range including room temperature. The non-symmetry also induces an increase in the emission quantum yield, compared to symmetric analogs.