Electrospun Fibers Research Articles

Enhanced sensing properties of optical ammonia sensor based on electrospun fibers containing Eosin-Y and silver nanoparticles

This study presents a highly sensitive fluorescence intensity-based gas sensor specifically designed to detect ammonia. Eosin-Y fluorescent dye and silver nanoparticles are incorporated into` cellulose acetate to fabricate fibers membrane using the electrospinning technique, which serves as the foundation for the optical ammonia sensors. Afterward, this sensor is illuminated by a 405 nm LED for monitoring purposes, resulting in changes to both intensity and wavelength. The sensitivity of the optical ammonia sensor is evaluated by comparing the fluorescence intensity recorded for pure nitrogen with that for 1000 ppm ammonia, expressed as the ratio I0/I1000 ppm. The sensor's ability to detect ammonia is evaluated based on the differences in fluorescence intensities between nitrogen and ammonia environments. The proposed optical ammonia gas sensor utilizes Eosin-Y molecules as indicator compounds. Notably, the sensor, constructed from an electrospun fiber membrane, demonstrates an exceptional response of 50.9 at 1000 ppm in an ammonia gas environment at room temperature, representing the highest response achieved to date in an ammonia gas sensor utilizing Eosin-Y molecules. Experimental findings highlight the enhanced sensitivity of the proposed Eosin-Y-containing electrospun fibers compared to traditional Eosin-Y-based dyes for optical ammonia sensing. The development of an optical ammonia sensor utilizing electrospun fibers embedded with fluorescent dye presents a promising opportunity, offering practical applicability due to its cost-effectiveness and straightforward manufacturing process. Finally, the innovative optical ammonia sensor approach can be applied across various fields, including environmental, industrial, and medical applications.

Microtubular and high porosity design of electrospun PEGylated poly (lactic-co-glycolic acid) fibrous implant for ocular multi-route administration and medication

Electrospun fibers have been gaining popularity in ocular drug delivery and cellular therapies. However, most of electrospun fibers are planar-shape membrane with large dimension relative to intraocular space, making difficult to use as therapeutic implants. Herein, fibrous microtubes with a hollow center were fabricated by electrospinning using linear diblock mPEG2000-PLGA. Uniform microfibers with 0.809 μm diameter was tailored using Box-Behnken Design model for electrospinning process optimization. The microtubes were 1 mm long with a 0.386 mm diameter. Their suitability for intraocular administration was demonstrated by both injection via a 22-gauge needle and implant via integration of intraocular lens into the vitreous or anterior chamber of eyes, respectively. Electrospun mPEG2000-PLGA had higher porosity, smaller specific surface area, and smaller water contact angle, than that of PLGA. Macroscopically, mPEG2000-PLGA microfibers can maintain overall geometry upon exposure to aqueous buffer for 12 h while having high water uptake and exhibited good elasticity. Hydrolysis with 90 % polymeric degradation in 10.5 weeks underlied sustained slow release of anti-inflammatory drug dexamethasone. PEGylation of PLGA imparted preferential cell adhesion with markedly higher growth of human retinal epithelial cells than lens epithelial ones. This study highlights the potential utility of implantable electrospun PLGA-based microtubes for multiple intraocular delivery routes.

Prolonging Cyclamen Flower Vase Life via 8-HQS and AgNO3 Treatments in a Controlled Release System

The current study applied electrospun fibers containing 8-hydroxyquinoline-5-sulfonic acid (8-HQS) (100, 150, and 200 mg L−1) and silver nitrate (AgNO3) (15 and 20 mg L−1) to enhance the longevity and qualitative parameters of two cyclamen cultivars. The results indicated that the vase life of the flowers treated with 20 mg L−1 AgNO3 and 200 mg L−1 8-HQS was higher than that of the other treatments (16 days). Cyclamens treated with 8-HQS (100 mg L−1) + AgNO3 (15 mg L−1) and 8-HQS (100 mg L−1) + AgNO3 (20 mg L−1) had lower polyphenol oxidase (PPO) activity than the control group. Also, it was observed that the higher phenylalanine ammonia-lyase (PAL) enzyme activity of cyclamens in the 8-HQS (150 mg L−1) + AgNO3 (15 mg L−1) treatment was longer than that of the other treatments and control groups. Treatment with 100 mg L−1 8-HQS and 20 mg L−1 AgNO3 showed higher peroxidase (POD) activity than the different treatments. This research indicated that adding AgNO3 and 8-HQS to electrospun fibers is a promising method for enhancing the longevity and maintaining the quality of these cut flowers.

Catechin as a functional additive in electrospun PCL/gelatin/nHA nanocomposite fibers for tissue engineering applications

AbstractThe promise of polymeric nanocomposite fibers in the biomedical field is well‐documented due to their adjustable properties and versatility. Electrospun fiber mats, which mimic the extracellular matrix, are particularly noted for their potential in tissue regeneration and repair. In this study, we investigate the role of catechin, a flavonoid, in enhancing cellular response to electrospun nanocomposite fibers of polycaprolactone (PCL), gelatin, and nanohydroxyapatite (nHA). Nanocomposite fibers were fabricated with varying concentrations of catechin and comprehensive analyses of the composite fibers were performed to evaluate their structural and chemical properties. In vitro, assays were performed to examine cell viability and ascertain the influence of catechin on cellular responses to these nanocomposite fibers. Simultaneously, in vivo studies assessed tissue responses to these materials. The findings revealed that incorporating catechin into PCL/gelatin/nHA nanocomposite fibers improved cellular responses in vitro as demonstrated by enhanced cell viability. Furthermore, in vivo investigations displayed positive tissue responses with these fibers, indicating their capacity to enhance cell growth and accelerate tissue regeneration. This study elucidates the potential of catechin as an integral component in designing polymeric nanocomposite fibers, potentially broadening the scope of their biomedical applications.

Development and characterization of orodispersible films containing amlodipine besylate and rosuvastatin calcium based on electrospun fibers

Amlodipine besylate (AML) and rosuvastatin calcium (ROS) are commonly used in the treatment of cardiovascular diseases such as hypertension, dyslipidemia, and coroner artery disease. Orodispersible films (ODFs) have received considerable attention in pharmaceutical development studies as they significantly improve patient compliance. The aim of this study was to develop an ODF formulation containing AML and ROS simultaneously as an electrospun fiber fixed dose preparation. Polymer solutions were evaluated for surface tension, viscosity, and conductivity properties. Preformulation studies were conducted to optimize the electrospinning process. Two different formulations, designated ODF-1 and ODF-2 were the focus of this study. Fiber characterization studies, such as scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), mechanical properties were performed to assess these two formulations. Furthermore, ODF characterizations, such as disintegration and wetting time, homogeneity of contents, and in vitro dissolution studies were carried out. All formulations exhibited suitable mechanical properties, facilitating easy storage and handling. ODF characterizations revealed rapid disintegration and wetting times for all formulations with over 90 % dissolution in 5 min for both AML and ROS. The overall evaluation of all experiments suggests that ODF-1 may more desirable mechanical properties and a more stable dissolution profile compared to ODF-2. Furthermore, individual ODFs loaded with AML or ROS (AML-ODF-1 and ROS-ODF-1) were prepared by ODF-1 preparation method and then characterized to compare the results with fixed dose ODF results. In conclusion, a promising formulation strategy has been developed to obtain an electrospun fiber ODF formulation containing AML and ROS that is reproducible and suitable for industrial production.

Photo-induced time-dependent controllable wettability of dual-responsive multi-functional electrospun MXene/polymer fibers

Switchable wettability potential in smart fibers is of paramount importance in various applications. Light-induced controllable changes in surface wettability have a significant role in this area. Herein, smart waterborne homopolymer, functional copolymer with different polarity and flexibility, and multi-functional terpolymer particles containing a time-dependent dual-responsive acrylated spiropyran, as a polymerizable monomer, were successfully synthesized through eco-friendly single-step emulsifier-free emulsion polymerization. Presence of 10 wt% of butyl acrylate and dimethylaminoethyl methacrylate relative to methylmethacrylate as functional comonomers decreased the Tg of the samples almost 20 ℃ and increased their polarity. The optical properties of the particles were investigated, and the UV–vis and fluorescence spectroscopy results showed that not only polarity and flexibility of the polymer chains may have a positive effect on improving the optical properties, but also the simultaneous presence of functional groups has a synergistic effect. The smart polymer particles with flexibility and polarity features exhibited higher absorption and emission compared to other samples. Inspired by these findings, multi-functional smart polymer fibers were prepared using the electrospinning method. The smart multi-functional electrospun fibers containing few-layer Ti3C2 MXenes were synthesized to improve the fibers’ properties and change the surface wettability due to the hydrophilic functional groups of MXene. Field-emission scanning electron microscopy images displayed the successful preparation of few-layer MXenes. Smooth and bead-free fibers with bright red fluorescence emission under UV irradiation were shown using fluorescence microscopy. The study on the surface wettability of fibers revealed that UV and visible light irradiation induced reversible time-dependent changes in the wettability of the smart multi-functional MXene/polymer electrospun fibers from hydrophobic to hydrophilic, reaching a water contact angle of 10° from an initial water contact angle of 100° under UV light and also changing to superhydrophilic state with passing time. Upon visible light exposure, the fibers returned to their original state. Furthermore, the fibers demonstrated a high stability over five alternating cycles of UV and visible light irradiation. This study shows that the fabrication of time-dependent smart fibers, utilizing the flexibility and polarity in the presence of MXenes, significantly improves and controls surface wettability changes. The outstanding dynamically photo-switchable wettability of these fibers may offer exciting opportunities in various applications, especially in the separation of oil from water contaminants.

Spinning a Sustainable Future: Electrospun Polysaccharide-Protein Fibers for Plant-Based Meat Innovation.

This study aims to evaluate the feasibility of producing electrospun fibers by combining polysaccharides, zein, and poly(ethylene oxide) (PEO) to simulate the fibers applied in plant-based meat analogs. The rheological properties of biopolymer solutions were evaluated, and the electrospun fibers were characterized according to their morphology, structural interactions, and thermal analysis. The results indicated that the fibers prepared in a ratio of 90:10 of zein/carrageenan from the mixture of a solution containing 23 wt.% of zein with a solution containing 1 wt.% of carrageenan and with the addition of 1 wt.% of PEO presented a promising structure for application as fibers in meat analogs because they have a more hydrophilic surface. Thus, they have good moisture retention. In addition, they have good thermal stability at high temperatures, which is crucial to achieve a consistent and pleasant texture. Furthermore, it was observed that adding zein and PEO helps with the spinnability of the polysaccharides, producing fibers with good homogeneity.

Vaginal Tissue Engineering via Gelatin-Elastin Fiber-Reinforced Hydrogels.

The vagina is a fibromuscular tube-shaped organ spanning from the hymenal ring to the cervix that plays critical roles in menstruation, pregnancy, and female sexual health. Vaginal tissue constituents, including cells and extracellular matrix components, contribute to tissue structure, function, and prevention of injury. However, much microstructural function remains unknown, including how the fiber-cell and cell-cell interactions influence macromechanical properties. A deeper understanding of these interactions will provide critical information needed to reduce and prevent vaginal injuries. Our objectives for this work herein are to first engineer a suite of biomaterials for vaginal tissue engineering and second to characterize the performance of these biomaterials in the vaginal microenvironment. We successfully created fiber-reinforced hydrogels of gelatin-elastin electrospun fibers infiltrated with gelatin methacryloyl hydrogels. These composites recapitulate vaginal material properties, including stiffness, and are compatible with the vaginal microenvironment: biocompatible with primary vaginal epithelial cells and in acidic conditions. This work significantly advances progress in vaginal tissue engineering by developing novel materials and developing a state-of-the-art tissue engineered vagina.

Functional electrospun polylactic acid core-shell thermochromic fibers with modified cellulose nanocrystals for enhanced temperature-responsive applications

Core-shell electrospun fibers with thermochromic materials are suitable for temperature sensing due to their customizable properties. However, the beneficial effect of bio-based thermochromic fibers incorporating sustainable nanomaterials needs to be further demonstrated, especially regarding their thermal stability and mechanical properties. In this study, core-shell structured nanofibers were produced through a co-axial electrospinning process using polylactic acid (PLA) and surface-modified cellulose nanocrystals (mCNCs) as the shell, and crystal violet lactone (CVL), bisphenol A, and 1-dodecanol as the core. Chemical characterization confirmed the successful grafting of vinyl siloxane within mCNCs, enhancing CNC dispersion in the PLA matrix. The thermochromic fibers exhibited smooth, uniform surfaces, with minimal impact of mCNCs on the glass transition temperature (Tg). Compared with neat electrospun PLA fibers, mCNC-added fibers showed improved thermal stability. Although the core material negatively affected mechanical properties, mCNCs enhanced tensile strength and Young’s modulus. The fibers demonstrated rapid and sensitive responses to temperature changes from 0 to 20 ˚C, indicating their potential as effective temperature sensors with improved properties.

Tough, Slippery, and Low-Permeability Multilayer Hydrogels Modified by Anisotropic Fiber Membrane for Soft Tissue Replacement.

Hydrogels with sustained lubrication, high load-bearing capacity, and wear resistance are essential for applications in soft tissue replacements and soft material devices. Traditional tough or lubricious hydrogels fail to balance the lubrication and load-bearing functions. Inspired by the gradient-ordered multilayer structures of natural tissues (such as cartilage and ligaments), a tough, smooth, low-permeability, and low-friction anisotropic layered electrospun fiber membrane-reinforced hydrogel was developed using electrospinning and annealing recrystallization. This hydrogel features a stratified porous network structure of varying sizes with tightly bonded interfaces, achieving an interfacial bonding toughness of 1.6 × 103 J/m2. The anisotropic fiber membranes, mimicking the orderly fiber structures within soft tissues, significantly enhance the mechanical properties of the hydrogel with a fracture strength of 20.95 MPa, a Young's modulus of 29.64 MPa, and a tear toughness of 37.94 kJ/m2 and reduce its permeability coefficient (6.1 × 10-17 m4 N-1 s-1). Meanwhile, the hydrogel demonstrates excellent solid-liquid phase load-bearing characteristics, which can markedly improve the tribological performance. Under a contact load of 4.1 MPa, the anisotropic fiber membrane-reinforced hydrogel achieves a friction coefficient of 0.036, a 219% reduction compared with pure hydrogels. Thus, the superior load-bearing and lubricating properties of this layered hydrogel underscore its potential applications in soft tissue replacements, medical implants, and other biomedical devices.

Spider silk inspired ultrafine carbon nanotubes-crosslinked porous carbon fibers for Zn-air batteries

There is a critical need for the development of low-cost, highly efficient, and stable bifunctional oxygen electrocatalysts for the advancement of Zn-air battery (ZAB). This study presents an Fe-, Ni-, and N-co-doped porous carbon material (FeNiN-CF-15) synthesized through the pyrolysis of a mixture combining the melamine and electrospun fibers. This material comprises carbon fiber substrates and spider silk-like ultrafine carbon nanotubes (CNTs) catalytically grown from FeNi alloys. With a high N doping level (12.9 at%), large specific surface area (385.18 m2 g−1), and conductive carbon network composed of CNTs, the new electrocatalyst exhibits outstanding bifunctional oxygen electrocatalytic performances. Specifically, it achieves a half-wave potential of 0.853 V for oxygen reduction reaction (ORR) and 1.571 V for oxygen evolution reaction (OER) at 10 mA cm−2. The exceptional ORR/OER electrocatalytic activity enables the FeNiN-CF-15-based liquid ZAB to deliver a high initial energy efficiency of 62.12 %, narrow charging/discharging voltage gap of 0.742 V, and robust cycling stability within 960 cycles for 320 h at 5 mA cm−2. Additionally, the reported electrocatalyst is proven competent for use in a flexible ZAB.

Generation of photosynthetic biomaterials by loading electrospun fibres with the green microalgae, Chlamydomonas reinhardtii

Hypoxic environments within tissues, characterised by low concentrations of oxygen, are a major limitation in certain biomedical applications such as wound healing and tissue engineering. Electrospun fibrous mats have demonstrated potential for use in these applications as they can absorb fluids and physically protect tissues, can be loaded with active compounds (i.e., antimicrobial or therapeutics) and have been shown to support cell migration, adhesive and proliferation. Here, we report electrospun fibrous mats which have been functionalised to overcome the limitations of hypoxia. Specifically, the successful incorporation of the photosynthetic green microalgae Chlamydomonas reinhardtii into electrospun fibrous mats based on polycaprolactone, polylactic acid, and cellulose acetate is demonstrated for the first time. The exploration of various culture conditions found that maximal C. reinhardtii growth occurred under constant light exposure over 24 h at 26 °C. Once laden with C. reinhardtii, the monitoring of material health found that the biomaterials developed were photosynthetically active over a period of 7 days, and capable of generating high concentrations of oxygen to the local environment. Overall, the findings reported here present C. reinhardtii-laden electrospun mats as strong candidates for oxygen-generating materials for potential use in biomedical applications.

Antimicrobial and antioxidative electrospun cellulose acetate-essential oils nanofibrous membranes for active food packaging to extend the shelf life of perishable fruits

Food preservation is critical to meeting the growing demand for fresh foods. We construct novel active packaging using active chemicals to extend the shelf life of fresh fruit and vegetables. In our study, we harnessed electrospinning technology to manufacture cellulose acetate nanofibers (CANFs) using natural, highly volatile cinnamon bark oil (CNO) and clove bud oil (CBO). The CNO and CBO loaded electrospun fibers were characterized and applied as active packaging membrane to evaluate the impact on shelf life of fresh grapes and tomatoes. Scanning electron microscopy (SEM), fourier-transform infrared spectroscopy (FT-IR), and gas chromatography–mass spectrometry (GC–MS) analysis indicated a uniform volatile component distribution, average fiber diameters, regulated release kinetics, and substantial antioxidant, and antibacterial activities. The use of 50 % w/w CNO and CBO-loaded CANFs as an active food packaging membrane for a shelf-life study of fresh grapes and tomatoes at 4 °C confirmed the microbiological safety of consumption for 40 days compared to 15 days in control samples, with a lesser reduction in physiochemical properties despite sensory evaluation revealing a shelf-life extension until 30 days.The efficacy and potential benefits of sustainable and effective packaging strategies are highlighted in this study, making it a promising alternative for preserving perishable tomatoes and grapes.

Electrospun Fiber‐Based Tubular Structures as 3D Scaffolds to Generate In Vitro Models for Small Intestine

AbstractRecently, in vitro models emerge as valuable tools in biomedical research by enabling the investigation of complex physiological processes in a controlled environment, replicating some traits of interest of the biological tissues. This study focuses on the development of tubular polymeric scaffolds, made of electrospun fibers, aimed to generate three‐dimensional (3D) in vitro intestinal models resembling the lumen of the gut. Polycaprolactone (PCL) and polyacrylonitrile (PAN) are used to produce tightly arranged ultrafine fiber meshes via electrospinning in the form of continuous tubular structures, mimicking the basement membrane on which the epithelial barrier is formed. Morphological, physical, mechanical, and piezoelectric properties of the PCL and PAN tubular scaffolds are investigated. They are cultured with Caco‐2 cells using different biological coatings (i.e., collagen, gelatin, and fibrin) and their capability of promoting a compact epithelial layer is assessed. PCL and PAN scaffolds show 42% and 50% porosity, respectively, with pore diameters and size suitable to impede cell penetration, thus promoting an intestinal epithelial barrier formation. Even if both polymeric structures allow Caco‐2 cell adhesion, PAN fiber meshes best suit many requirements needed by this model, including highest mechanical strength upon expansion, porosity and piezoelectric properties, along with the lowest pore size.

Identification of Effects of Parylene-C Coating on Electrospun Fibers

As various healthcare technologies such as regenerative medicine, precision medicine, and alternative approaches to animal testing develop, the interest in the use and application of nano- and microfibers is steadily increasing. In this study, the effect of parylene-C coating on electrospun fibers was investigated, and a pattern coating method was developed to expand the potential utilization of parylene-C-coated electrospun fibers. An SEM analysis demonstrated that parylene-C was successfully deposited on the electrospun fibers without any failure such as pinholes or air bubbles. Biocompatibility was investigated through cell tests, which indicated that the coated fibers were non-toxic and supported cell growth well. Tensile tests demonstrated a significant increase in the elastic modulus of the parylene-C-coated fibers, with it nearly quadrupling compared to the original PCL fibers, and the fracture strength almost doubled. At the same time, hydrophobicity was well maintained without any statistically significant changes. In particular, a non-adhesive magnet–metal masking was proposed in order to selectively coat the electrospun fibers with parylene-C with a specific pattern. Furthermore, it was presented that the magnet–metal mask-based coating electrospun nanofibers with parylene-C could be used in the fabrication of hybrid fibers composed of different diameters and materials.

Silybin-Functionalized PCL Electrospun Fibrous Membranes for Potential Pharmaceutical and Biomedical Applications.

Silybin is a natural flavonolignan with potential anticancer, antioxidant, and hepatoprotective properties. In the present study, various loadings of silybin (1, 3, and 5 wt%) were encapsulated in poly-ε-caprolactone (PCL) fibers by electrospinning, in order to produce new pharmaceutical composites with improved bioactive and drug delivery properties. The morphological characteristics of the composite fibrous structures were evaluated by scanning electron microscopy (SEM), and the encapsulation efficiency and the release rate of silybin were quantified using a UV-Vis spectrophotometer. The analysis of the membranes' thermal behavior by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) revealed the existence of interaction between PCL and silybin. An investigation of the cytocompatibility of the composite membranes revealed that normal cells displayed an unimpeded proliferation in the respective silybin concentrations; however, tumor cell growth demonstrated a dose-dependent inhibition. Furthermore, an effective antioxidant activity against hydrogen peroxide-induced oxidative stress in HEK-293 cells was observed for the prepared electrospun fibrous mats.

The effect of electric field uniformity on electrospun jet evolution and fiber morphology

Electric field distribution has a considerable impact on jet motion and resultant fibers’ diameter and morphology in electrospinning process. This study aims to explore the effect of electric field uniformity on jet evolution and fiber morphology by using auxiliary electrodes. Four disc auxiliary electrodes with different external diameters were designed. A high-speed photography equipment was employed to capture the jet motion. The morphology the fibers obtained from different locations of the jet were observed by the SEM to investigate jets evolution under different electric fields. The three-dimensional electric field were calculated by the ANSYS Maxwell software to simulate and quantify the electric field distribution throughout the electrospinning process. The results show that the larger diameter of the auxiliary electrode creates more uniform electric field distribution, smaller jet straight lengths, larger whipping amplitude, and lower the jet velocity. These factors result in finer and more uniform fibers. It was found that the morphology of fiber surface, beads shape and size also influenced by the uniformity of electric field distribution. This research indicates that a controllable uniform electric field was essential in preparing high-performance fibers.

Seaweed Superheroes: Cystoseira barbata-Incorporated Electrospun Fibers for Lead Ion Sequestration.

The efficient removal of lead ions at low concentrations is paramount in combating the significant threat posed by water pollution resulting from industrial activities and population growth. In this study, electrospun C. barbata/PAN fibers were developed to efficiently remove lead(II) ions from water. The morphology, structure, and mechanical properties of the fibers were examined, highlighting that the augmentation of the surface area through the conversion of C. barbata into the polymer fibers facilitates increased metal bonding sites during sorption. C. barbata/PAN fibers exhibited superior characteristics, including higher surface area, smaller pore size, and increased pore volume, compared to powdered C. barbata. The effects of factors such as shaking time, algae percentage, sorbent amount, pH, metal concentration, and temperature on Pb(II) sorption were investigated by the batch method. At an initial ion concentration of 100 μg L-1 and pH 4.0, C. barbata (5 wt %)/PAN fiber demonstrated a notable sorption efficiency of 89-90% (270 μg/g) after 60 min. The equilibrium data align with the Freundlich and Dubinin-Radushkevich isotherm models, whereas the pseudo-second-order kinetic model provides the most suitable description. The characterization of fibers after sorption revealed that carboxyl, hydroxyl, and sulfonyl groups play an active role in Pb(II) sorption.

Antibacterial and Antibiofilm Properties of Native Australian Plant Endophytes against Wound-Infecting Bacteria.

The wound management field faces significant challenges due to antimicrobial resistance (AMR) and the complexity of chronic wound care. Effective wound treatment requires antimicrobial dressings to prevent bacterial infections. However, the rise of AMR necessitates new antimicrobial agents for wound dressings, particularly for addressing bacterial pathogens like methicillin-resistant Staphylococcus aureus (MRSA). Endophytic fungi, known for producing diverse bioactive compounds, represent a promising source of such new agents. This study tested thirty-two endophytic fungi from thirteen distinct Australian native plants for their antibacterial activity against S. aureus. Ethyl acetate (EtOAc) extracts from fungal culture filtrates exhibited inhibitory effects against both methicillin-sensitive S. aureus ATCC 25923 (MIC = 78.1 µg/mL) and MRSA M180920 (MIC = 78.1 µg/mL). DNA sequence analysis was employed for fungal identification. The most active sample, EL 19 (Chaetomium globosum), was selected for further analysis, revealing that its EtOAc extracts reduced S. aureus ATCC 25923 biofilm formation by 55% and cell viability by 57% to 68% at 12 × MIC. Furthermore, cytotoxicity studies using the brine shrimp lethality test demonstrated low cytotoxicity up to 6 × MIC (25% mortality rate) with an LC50 value of 639.1 µg/mL. Finally, the most active sample was incorporated into polycaprolactone (PCL) fiber mats via electrospinning, with resultant inhibition of S. aureus species. This research underscores the potential of endophytic fungi from Australian plants as sources of substances effective against common wound pathogens. Further exploration of the responsible compounds and their mechanisms could facilitate the development of wound dressings effective against MRSA and innovative biofilm-resistant electrospun fibers, contributing to the global efforts to combat AMR.

Development of quaternized agar-based materials for the coronavirus inactivation

The COVID-19 pandemic has revealed weaknesses in healthcare systems and underscored the need for advanced antimicrobial materials. This study investigates the quaternization of agar, a seaweed-derived polysaccharide, and the development of electrospun membranes for air filtration in facemasks and biomedical applications. Using the betacoronavirus MHV-3 as a model, quaternized agar and membranes achieved a 90–99.99 % reduction in viral load, without associated cytotoxicity. The quaternization process reduced the viscosity of the solution from 1.19 ± 0.005 to 0.64 ± 0.005 Pa.s and consequently the electrospun fiber diameter ranged from 360 to 185 nm. Membranes synthesized based on polyvinyl alcohol and thermally cross-linked with citric acid exhibited lower water permeability. Avoiding organic solvents in the electrospinning technique ensured eco-friendly production. This approach offers a promising way to develop biocompatible and functional materials for healthcare and environmental applications.