Electrospray Research Articles

Bioactivity-Guided Isolation of Antistroke Compounds from Gymnadenia conopsea (L.) R. Br.

A bioactivity-guided separation strategy was used to identify novel antistroke compounds from Gymnadenia conopsea (L.) R. Br., a medicinal plant. As a result, 4 undescribed compounds (1-2, 13, and 17) and 13 known compounds, including 1 new natural product (3), were isolated from G. conopsea. The structures of these compounds were elucidated through comprehensive spectroscopic techniques, such as 1D/2D nuclear magnetic resonance (NMR) spectroscopy, high-resolution electrospray ionization mass spectrometry (HRESIMS), and quantum chemical calculations. An oxygen-glucose deprivation/reoxygenation (OGD/R)-injured rat pheochromocytoma (PC12) cell model was used to evaluate the antistroke effects of the isolates. Compounds 1-2, 10-11, 13-15, and 17 provided varying degrees of protection against OGD/R injury in the PC12 cells at concentrations of 12.5, 25, and 50 µM. Among the tested compounds, compound 17 demonstrated the most potent neuroprotective effect, which was equivalent to that of the positive control drug (edaravone). Then, transcriptomic and bioinformatics analyses were conducted to reveal the regulatory effect of compound 17 on gene expression. In addition, quantitative real-time PCR (qPCR) was performed to verify the results of the transcriptomic and bioinformatics analyses. These results suggest that the in vitro antistroke effect of compound 17 may be associated with the regulation of the Col27a1 gene. Thus, compound 17 is a promising candidate for the development of novel antistroke drugs derived from natural products, and this topic should be further studied.

Simultaneous determination of 13 biogenic amines and their metabolites in liquid fermented food by HPLC-QTRAP-MS without derivatization

Biogenic amines and their metabolites (BAs) are among the most frequently detected compounds in liquid fermented foods, raising significant concerns about the potential risks they pose. To rapidly and selectively determine BAs, this study proposed and validated a method for the simultaneous determination of 13 BAs in liquid fermented foods using high performance liquid chromatography-triple quadrupole/linear ion trap mass spectrometry (HPLC-QTRAP-MS) without derivatization. The simultaneous separation and determination of histamine (HIS), tyramine (TYR), putrescine (PUT), octopamine (OCT), 2-phenylethylamine (2-PHE), dopamine (DOP), spermidine (SPD), epinephrine (EPI), agmatine (AGM), 5-hydroxytryptamine (5-HYD), tryptamine (TRY), L-noradrenaline (L-NOR), cadaverine (CAD) were achieved using a Waters Atlantis Premier BEH Z-HILIC (1.7 μm particle size, 100 mm × 2.1 mm id) column with a mobile phase consisting of water (containing 0.025 % formic acid) and acetonitrile (containing 0.1 % formic acid). The analysis of target compounds was performed with electrospray ionization (ESI) in positive ion mode, multiple reaction monitoring (MRM), information dependent acquisition (IDA), enhanced product ion (EPI), and multi-step mode analysis combined with EPI library searching. To enhance the extraction efficiency of BAs, factors such as extraction solvent, filter membranes, extraction methods, pH, oscillation speed, time and temperature were systematically investigated. The results demonstrated that the method exhibited low limits of detection (LOD) and quantification (LOQ), ranging from 0.05 to 2.00 µg/L and 0.16 to 6.60 µg/L, respectively. The method also showed satisfactory reproducibility, with intra-day and inter-day relative standard deviations ranging from 0.90 % to 3.80 % and 2.65 % to 8.27 %, respectively. Additionally, it had a broad linear range from 0.05 to 200.00 µg/L with excellent linearity (R>0.99) and an average recovery rate between 65.68 % and 115.14 %. Overall, the results demonstrated that the established method was convenient to operate, offered a short analysis time, and achieved high accuracy and sensitivity. It met the qualitative and quantitative requirements for detecting 13 BAs in liquid fermented food, thus providing strong technical support for BAs detection.

Brown Carbon Emissions from Biomass Burning under Simulated Wildfire and Prescribed-Fire Conditions.

We investigated the light-absorption properties of brown carbon (BrC) as part of the Georgia Wildland-Fire Simulation Experiment. We constructed fuel beds representative of three ecoregions in the Southeastern U.S. and varied the fuel-bed moisture content to simulate either prescribed fires or drought-induced wildfires. Based on decreasing fire radiative energy normalized by fuel-bed mass loading (FREnorm), the combustion conditions were grouped into wildfire (Wild), prescribed fire (Rx), and wildfire involving duff ignition (WildDuff). The emitted BrC ranged from weakly absorbing (WildDuff) to moderately absorbing (Rx and Wild) with the imaginary part of the refractive index (k) values that were well-correlated with FREnorm. We apportioned the BrC into water-soluble (WSBrC) and water-insoluble (WIBrC). Approximately half of the WSBrC molecules detected using electrospray-ionization mass spectrometry were potential chromophores. Nevertheless, k of WSBrC was an order of magnitude smaller than k of WIBrC. Furthermore, k of WIBrC was well-correlated with FREnorm while k of WSBrC was not, suggesting different formation pathways between WIBrC and WSBrC. Overall, the results signify the importance of combustion conditions in determining BrC light-absorption properties and indicate that variables in wildland fires, such as moisture content and fuel-bed composition, impact BrC light-absorption properties to the extent that they influence combustion conditions.

Solar Light CO2 Photoreduction Enhancement by Mononuclear Rhenium(I) Complexes: Characterization and Mechanistic Insights.

The catalytic efficacy of a novel mononuclear rhenium(I) complex in CO2 reduction is remarkable, with a turnover number (TONCO) of 1517 in 3 h, significantly outperforming previous Re(I) catalysts. This complex, synthesized via a substitution reaction on an aromatic ring to form a bromo-bipyridine derivative, L1 = 2-bromo-6-(1H-pyrazol-1-yl)pyridine, and further reacting with [Re(CO)5Cl], results in the facial-tricarbonyl complex [ReL1(CO)3Cl] (1). The light green solid was obtained with an 80% yield and thoroughly characterized using cyclic voltammetry, nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy. Cyclic voltammetry under CO2 atmosphere revealed three distinct redox processes, suggesting the formation of new electroactive compounds. The studies on photoreduction highlighted the ability of the catalyst to reduce CO2, while NMR, FTIR, and electrospray ionization (ESI) mass spectrometry provided insights into the mechanism, revealing the formation of solvent-coordinated complexes and new species under varying conditions. Additionally, computational studies (DFT) were undertaken to better understand the electronic structure and reactivity patterns of 1, focusing on the role of the ligand, the spectroscopic features, and the redox behavior. This comprehensive approach provides insights into the intricate dynamics of CO2 photoreduction, showcasing the potential of Re(I) complexes in catalysis.

Unravelling structural insights into ligand-induced photoluminescence mechanisms of sulfur dots.

Sulfur dots (S-QDs) hold promise as a new category of metal-free, luminescent nanomaterials, yet their practical application faces challenges primarily due to a limited understanding of their structure and its impact on their optical properties. Herein, by employing a spectrum of aliphatic and aromatic ligands, we identify the surface structure and composition of S-QDs while delineating the pivotal role of ligands in inducing photoluminescence. Thiol-functionalized ligands, such as 4-mercapto benzoic acid and glutathione, notably promote the formation of both green and blue luminescent S-QDs, boosting a high quantum yield of up to 56%. Further investigation on the synthesis of S-QDs with 4-mercapto benzoic acid unveils the dual role of H2O2: etching sulfur powder and oxidizing the -SH group to -SO2H. These oxidized ligands passivate the S-QD surface through hydrogen bonding. Electrospray ionization mass spectrometry analysis unveils the presence of distinct sulfur species such as [S4(C6H5SO2H)4(H2O)2H]+ and [S6(C6H5SO2H)6(H2O)3H]+, while XPS analysis confirms the existence of zerovalent sulfur and oxidized sulfur species including SO32- and SO42-. Further detailed spectroscopic examination demonstrates that S-QDs predominantly exist as aggregated entities, with the emission wavelength correlating with the degree of aggregation. The absence of photoluminescence in aggregations devoid of ligands underscores the critical role of ligands in the photoluminescence genesis of S-QDs.

Direct glycosylation analysis of intact monoclonal antibodies combining ESI MS of glycoforms and MALDI-in source decay MS of glycan fragments

Monoclonal antibody (mAb) glycoengineering has the potential to improve the efficacy of biopharmaceuticals by fine-tuning specific biological properties. Glycosylation analysis is key to monitoring the glycoengineering process. Various mass spectrometry (MS)-based methods are available to characterize mAb glycosylation at different structural levels, but comprehensive analysis is typically time-consuming and costly. Here, we present an approach that combines conventional intact mass measurement of glycoforms by direct infusion ESI-MS with an advanced MALDI-in-source decay FT-ICR MS method for direct analysis of glycans in intact mAbs, without the need for enzymatic release and separation. Using a sodium-doped MALDI matrix, glycans were directly released as ISD fragment ions from the intact mAbs during the ionization process. Measurement of 0,2A fragment signals yielded reproducible glycan profiles that were consistent with conventional methods, yet was achieved with unprecedented speed, providing complementary information to that obtained through intact mass measurement. The methods were applied to standard and glycoengineered trastuzumab and rituximab, allowing rapid glycosylation profiling and structural analysis of glycans by tandem MS of selected ISD fragment ions. This fast approach can facilitate the early-phase development of glycoengineering processes by constraining further in-depth analyses. We envision a broader applicability in studies focused on glycosylation changes in mAbs.

In-Depth Mass Spectrometry Study of Vanadium(IV) Complexes with Model Peptides.

Investigating the speciation of vanadium complexes in the presence of potential biomolecular targets under physiological conditions remains challenging, and further experimental techniques are needed to better understand the mechanism of action of potential metallodrugs. The interaction of two model peptides (angiotensin I and angiotensin II) with three well-known oxidovanadium(IV) compounds with antidiabetic and/or anticancer activity, [VIVO(pic)2(H2O)], [VIVO(ma)2], and [VIVO(dhp)2] (where pic, ma, and dhp are picolinate, maltolate, and 1,2-dimethyl-3-hydroxy-4(1H)-pyridinonate anions, respectively), was investigated by ESI-MS/MS (electrospray ionization tandem mass spectrometry) and complemented by EPR (electron paramagnetic resonance) spectroscopy measurements and theoretical calculations at the DFT (density functional theory) level. The results demonstrated that vanadium-peptide bonds are preserved after HCD (higher energy collisional dissociation) fragmentation, allowing for the identification of binding sites through a detailed analysis of the fragmentation spectra. Angiotensin I (AT1) and angiotensin II (AT2) exhibited different coordination behaviors. AT1, with two His residues (His6, His9), prefers to form [AT1 + VOL] adducts with both histidine residues coordinated to the metal ion, while AT2, which has only His6, can bind the metal in a monodentate fashion, forming also [AT2 + VOL2] adducts. Insights from this study pave the way to ESI-MS/MS investigations of more complex systems, including target proteins and further development of vanadium-based drugs.

Fast, Easy, and Reproducible Fingerprint Methods for Endotoxin Characterization in Nanocellulose and Alginate-Based Hydrogel Scaffolds.

Nanocellulose- and alginate-based hydrogels have been suggested as potential wound-healing materials, but their utilization is limited by the Food and Drug Administration (FDA) requirements regarding endotoxin levels. Cytotoxicity and the presence of endotoxin were assessed after gel sterilization using an autoclave and UV treatment. A new fingerprinting method was developed to characterize the compounds detected in cellulose nanocrystal (CNC)- and cellulose-nanofiber (CNF)-based hydrogels using both positive- and negative-ion mode electrospray ionization Fourier transform ion cyclotron resonance mass spectroscopy (ESI FT-ICR MS). These biobased hydrogels were used as scaffolds for the cultivation and growth of human dermal fibroblasts to test their biocompatibility. A resazurin-based assay was preferred over all other biocompatibility methodologies since it allowed for the evaluation of viability over time in the same sample without causing cell lysis. The CNF dispersion of 6 EU mL-1 was slightly above the limits, and it did not affect the cell viability, whereas CNC hydrogels induced a reduction of metabolic activity by the fibroblasts. The chemical structure of the detected endotoxins did not contain phosphates, but it encompassed hydrophobic sulfonate groups, requiring the development of new high-pressure sterilization methods for the use of cellulose hydrogels in medicine.

Ag+-Induced Assembly of Pt Clusters for Photocatalytic Hydrogen Production.

Cluster-assembled nanowires provide a unique strategy for the preparation of high-performance nanostructures. However, existing preparations are limited by complex processes and harsh reaction conditions. Here, Ag+ ions were utilized as a novel structure-directing agent to generate the self-assembly of Pt clusters to form ultrafine nanowires with a diameter of less than 5 nm. Electrospray ionization mass spectrometry (ESI-MS) and extended X-ray absorption fine structure (EXAFS) characterizations demonstrated that every Ag+ bridged two [Pt3(CO)3(μ2-CO)3]n2- clusters through coordination and formed a sandwich-like structure of [Pt3(CO)3(μ2-CO)3]nAg[Pt3(CO)3(μ2-CO)3]m3-. As a result, multiple sandwich-like structures of [Pt3(CO)3(μ2-CO)3]nAg[Pt3(CO)3(μ2-CO)3]m3- were established by Ag+ to form Pt nanowire superstructures {[Pt3(CO)6]nAg[Pt3(CO)6]mAg[Pt3(CO)6]x}∞ (abbreviated as Ag-Pt NWS). Our results demonstrate that the Pt nanowire superstructures showed promising cocatalytic performance for photocatalytic H2 production with the involvement of Ag+, which promises a desirable way to develop advanced functional nanomaterials.

Rearrangement of Proline Complexes with Zn2+: An Infrared Multiple Photon Dissociation and Theoretical Investigation.

Complexes of proline (Pro) cationized with Zn2+ and Cd2+ were examined by infrared multiple photon dissociation (IRMPD) action spectroscopy using light generated from a free electron laser. Complexes of intact Pro with CdCl+, CdCl+(Pro), a complex of (Zn+Pro-H)+ where a proton has been lost, as well as Zn+(Pro-H)(Pro) were formed by electrospray ionization. In order to identify the structures formed experimentally, the IRMPD spectra were compared to those calculated from optimized structures at the B3LYP/6-311+G(d,p) level for zinc complexes and B3LYP/def2-TZVP level with an effective core potential on cadmium for the CdCl+(Pro) system. For the latter complex, the main binding motif observed has a zwitterionic proline ligand structure, [CO2-]cc, where the metal binds to the two carboxylate oxygens. In contrast, for Zn+(Pro-H)(Pro), both ligands interact with zinc via a [N,CO-][N,CO] binding motif, where binding is observed at the carbonyl oxygens and nitrogens for both ligands, consistent with previous work. In both cases, contributions from different puckers of the proline ring may contribute. For (Zn+Pro-H)+, we identify that the structure is actually ZnH+(Pro-2H), in which the proline has been dehydrogenated and one of the hydrogens has migrated to form a covalent bond with Zn, which verifies a previous report relying on a single OH stretch band.

Online Supercritical Fluid Chromatography Hyphenated to Fourier Transform Ion Cyclotron Resonance Mass Spectrometry with Quadrupole Detection for Microalgae Bio-Oil Characterization.

Microalgae are an attractive feedstock for biofuel production thanks to their renewable nature, high growth rate, and ability to use anthropogenic CO2. The conversion of microalgae by hydrothermal liquefaction (HTL) leads to a solid residue, a gaseous phase, and a biocrude. However, the bio-oil is rich in heteroatoms and requires upgrading processes to be used as biofuels. For these treatments to be effective, detailed knowledge of the sample is crucial. The bio-oil was characterized by direct introduction into a Fourier transform ion cyclotron resonance mass spectrometer (DI-FTICR MS) with an electrospray ionization source (ESI). Thousands of molecular formulas were assigned with a high level of confidence, mainly compounds with nitrogen and oxygen atoms. Additionally, the bio-oil was analyzed by coupling supercritical fluid chromatography (SFC) and FTICR to combine the separation power of SFC to the high performances of a 12 T FTICR. Quadrupole detection (2ω) was used in FTICR to have a high resolving power with a lower transient time. The coupling allowed the separation of many isomers along the chromatogram, showing the isomeric complexity of microalgae bio-oils. Moreover, classes of compounds were separated according to their heteroatom class thanks to the SFC separation. In this work, the advantages of DI-FTICR MS and SFC-FTICR MS proved complementary, and DI was useful to study the bio-oil at the molecular scale thanks to the high performances, while SFC proved useful for the characterization at the isomeric scale. This demonstrated the significant potential of this new online hyphenated technique for the characterization of complex matrices.

Genome Analysis of a Potential Novel Vibrio Species Secreting pH- and Thermo-Stable Alginate Lyase and Its Application in Producing Alginate Oligosaccharides.

Alginate lyase is an attractive biocatalyst that can specifically degrade alginate to produce oligosaccharides, showing great potential for industrial and medicinal applications. Herein, an alginate-degrading strain HB236076 was isolated from Sargassum sp. in Qionghai, Hainan, China. The low 16S rRNA gene sequence identity (<98.4%), ANI value (<71.9%), and dDDH value (<23.9%) clearly indicated that the isolate represented a potential novel species of the genus Vibrio. The genome contained two chromosomes with lengths of 3,007,948 bp and 874,895 bp, respectively, totaling 3,882,843 bp with a G+C content of 46.5%. Among 3482 genes, 3332 protein-coding genes, 116 tRNA, and 34 rRNA sequences were predicted. Analysis of the amino acid sequences showed that the strain encoded 73 carbohydrate-active enzymes (CAZymes), predicting seven PL7 (Alg1-7) and two PL17 family (Alg8, 9) alginate lyases. The extracellular alginate lyase from strain HB236076 showed the maximum activity at 50 °C and pH 7.0, with over 90% activity measured in the range of 30-60 °C and pH 6.0-10.0, exhibiting a wide range of temperature and pH activities. The enzyme also remained at more than 90% of the original activity at a wide pH range (3.0-9.0) and temperature below 50 °C for more than 2 h, demonstrating significant thermal and pH stabilities. Fe2+ had a good promoting effect on the alginate lyase activity at 10 mM, increasing by 3.5 times. Thin layer chromatography (TLC) and electrospray ionization mass spectrometry (ESI-MS) analyses suggested that alginate lyase in fermentation broth could catalyze sodium alginate to produce disaccharides and trisaccharides, which showed antimicrobial activity against Shigella dysenteriae, Aeromonas hydrophila, Staphylococcus aureus, Streptococcus agalactiae, and Escherichia coli. This research provided extended insights into the production mechanism of alginate lyase from Vibrio sp. HB236076, which was beneficial for further application in the preparation of pH-stable and thermo-stable alginate lyase and alginate oligosaccharides.

SIL-IS LC-ESI-MS/MS method for simultaneous quick detection of amoxicillin and clavulanic acid in human plasma: Development, validation and its application to a pharmacokinetics study.

A liquid chromatography electrospray ionization tandem mass spectrometry method with amoxicillin-d4 as the stable isotope-labeled internal standard for simultaneous quick detection of amoxicillin and clavulanic acid in human plasma was developed and validated. Chromatographic separations were performed on a Hedera ODS-2 column (2.1 × 150 mm, 5μm). The mobile phases for gradient elution were aqueous solution containing 0.2% acetic acid (AA) (mobile phase A) together with organic phase solution (acetonitrile and methanol mixed solution, mobile phase B). Mass spectrometry was performed using negative electrospray ionization in multiple reaction monitoring mode. The target fragment ion pairs of amoxicillin, clavulanic acid and amoxicillin-d4 were m/z 364.1 → 223.1, 198.1 → 135.9 and 368.1 → 227.1, respectively. The linear ranges of this method were 40-5,000 ng/ml for amoxicillin and 30-2,500 ng/ml for clavulanic acid, with coefficient of determination > 0.9900. This method validation included selectivity, standard curve, lower limit of quantitation, accuracy, precision, recovery, matrix effect (hemolytic matrix and hyperlipidemic matrix), carryover, stability, dilution reliability and incurred sample reanalysis study. A successful application of this method was realized in a pharmacokinetic study after administration of amoxicillin-clavulanic acid potassium granules.

Dynamics of the Aspiration of Charged Droplets into a LC-ESI-MS System.

Electrospray ionization (ESI) enables coupling between liquid chromatography (LC) and mass spectrometry (MS). Since it is a gentle ionization method, it is frequently used for the analysis of large biomolecules. In recent years, several experimental setups have demonstrated that the use of ESI results in the formation of charged droplets that are aspirated into the vacuum systems of mass spectrometers. This results in a variety of consequences, such as instrument contamination, which can impede the analytical performance. We investigate the signatures of aspirated charged droplets with a commercial LC-ESI-MS system at analytical conditions. Previous observations without LC coupling are reproduced and show that significant droplet aspiration is probably taking place at analytical LC-ESI-MS conditions. This common phenomenon likely decreases the instrument sensitivity. Analyte can be released by isolation and fragmentation of droplet fragments; thus, aspirated droplets can mask analyte even in the mass analyzer region. The complex morphology of droplet MS/MS mass spectra is highly reproducible at the same experimental conditions. This implies the existence of distinct molecular reaction pathways of the droplet fragments. To assess the effect of droplet aspiration on analytical applications, relevant method and ion source parameters, which are commonly varied during method optimization, were investigated. Further variations of the solvent composition revealed that the aspirated droplets and their fragmentation are particularly sensitive to the solvent composition and thus also to the LC solvent gradient in an analytical experiment.

Iron-Containing Seed Particles Enhance α-Pinene Secondary Organic Aerosol Mass Concentration and Dimer Formation.

Secondary organic aerosol (SOA) comprises the majority of submicron particles and is important for air pollution, health, and climate. When SOA mixes with inorganic particles containing transition metals (e.g., Fe), chemical reactions altering physicochemical properties can occur. Here, we study Fe's impact on the formation and chemical composition of SOA formed via dark α-pinene ozonolysis on either (NH4)2SO4 or Fe-containing (NH4)2SO4 seed particles and aged at varying relative humidities (RHs). Aerosol composition was determined using online extractive electrospray ionization mass spectrometry, providing high-resolution chemical and temporal identification of monomers and dimers in the SOA. At high RH, Fe's presence resulted in higher particulate SOA mass concentrations (117 ± 14 μg m-3) than those formed in its absence (70 ± 1 μg m-3). Enhanced mass is coupled with more dimers (C15-20's), attributed to Fenton-driven oligomerization reactions. Experiments with Fe3+-containing seeds showed similar chemical composition and enhanced SOA mass, suggesting a dark reduction pathway to form Fe2+ in the presence of SOA. Overall, Fe's presence at high RH lowers SOA volatility and enhances particulate organic mass and condensed phased reactions of higher volatility species that would normally not participate in SOA formation, which may be important when considering its formation in air quality and climate models.

Pharmaceutical metabolite identification in lettuce (Lactuca sativa) and earthworms (Eisenia fetida) using liquid chromatography coupled to high-resolution mass spectrometry and in silico spectral library.

Pharmaceuticals released into the aquatic and soil environments can be absorbed by plants and soil organisms, potentially leading to the formation of unknown metabolites that may negatively affect these organisms or contaminate the food chain. The aim of this study was to identify pharmaceutical metabolites through a triplet approach for metabolite structure prediction (software-based predictions, literature review, and known common metabolic pathways), followed by generating in silico mass spectral libraries and applying various mass spectrometry modes for untargeted LC-qTOF analysis. Therefore, Eisenia fetida and Lactuca sativa were exposed to a pharmaceutical mixture (atenolol, enrofloxacin, erythromycin, ketoprofen, sulfametoxazole, tetracycline) under hydroponic and soil conditions at environmentally relevant concentrations. Samples collected at different time points were extracted using QuEChERS and analyzed with LC-qTOF in data-dependent (DDA) and data-independent (DIA) acquisition modes, applying both positive and negative electrospray ionization. The triplet approach for metabolite structure prediction yielded a total of 3762 pharmaceutical metabolites, and anin silico mass spectral library was created based on these predicted metabolites. This approach resulted in the identification of 26 statistically significant metabolites (p < 0.05), with DDA + and DDA - outperforming DIA modes by successfully detecting 56/67 sample type:metabolite combinations. Lettuce roots had the highest metabolite count (26), followed by leaves (6) and earthworms (2). Despite the lower metabolite count, earthworms showed the highest peak intensities, closely followed by roots, with leaves displaying the lowest intensities. Common metabolic reactions observed included hydroxylation, decarboxylation, acetylation, and glucosidation, with ketoprofen-related metabolites being the most prevalent, totaling 12 distinct metabolites. In conclusion, we developed a high-throughput workflow combining open-source software with LC-HRMS for identifying unknown metabolites across various sample types.

Influence of Solvent Relative Permittivity in Swab Spray Mass Spectrometry.

The influence of solvent properties on ion generation by swab spray ionization was investigated. The ability of a variety of solvents of different relative permittivity, surface tension, and viscosity to form a stable and reproducible electrospray was examined. It is demonstrated that in swab spray ionization, a crucial balance between solvent composition, applied potential, and the solvent flow fed to the swab head must be maintained. The solvent composition was found to significantly affect the shape of the Taylor cone and the emerging cone jet, which eventually have an impact on the resulting ion yield. The results indicate that the relative permittivity of solvents measured under standard conditions is the main factor governing jet shaping, and consequently, the ionization efficacy. Short jets, which are required for maximum ion yield, were observed for solvents with relative permittivity εr higher than 25. Solvents exhibiting lower relative permittivity required the addition of 20% to 60% methanol to limit the jet length and to avoid the ineffective dripping pulsation. The observed effects were compared to conventional electrospray ionization and paper spray ionization.

Antinociceptive in vivo activity and chemical profiling by UHPLC-MS/MS of stem bark and leaves extracts of Ficus maxima Mill. (Moraceae)

Ethnopharmacological relevanceFicus maxima is a medicinal plant extensively used in traditional medicine by Indigenous peoples across Central and South America. It is a member of the family Moraceae, subgenus Pharmacosycea, employed in treating various conditions, including intestinal parasites, gingivitis, internal inflammations, and snake bites. Despite its significant pharmacological potential, the species remains underrepresented in scientific literature. Aim of the studyThis study aimed to evaluate the in vivo antinociceptive properties of leaf (ELFM) and stem bark (EBFM) extracts from Ficus maxima. Additionally, the chemical composition of these extracts was determined using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Materials and methodsPlant material was collected in Abaetetuba, Pará, Brazil, in October 2013 and subjected to static maceration to obtain crude ELFM and EBFM. Bio-guided fractionation was performed by sequential liquid-liquid partitioning with hexane (Hex), dichloromethane (DCM), and ethyl acetate (EtOAc), yielding the following fractions: ELFM-Hex and EBFM-Hex, ELFM-DCM and EBFM-DCM, and ELFM-EtOAc and EBFM-EtOAc. The biological activity of EBFM, ELFM, and their respective fractions were evaluated using the formalin-induced pain test and the hot plate test, followed by an assessment of their mechanisms of action. The UHPLC-MS/MS analysis was conducted using electrospray ionization (ESI) in both positive and negative modes. Metabolite annotation was facilitated by MS/MS libraries and molecular networks constructed on the GNPS platform. ResultsThe reactivity time to formalin in the neurogenic phase was reduced from 84.7 ± 7.6 s (100%) to 37.3 ± 4.7 s (44%), 33.1 ± 6.3 s (39%), 40.7 ± 7.4 s (48%), 57.2 ± 2.6 s (77%), 49.7 ± 4.1 s (58%), 46.8 ± 8.1 s (55%), and 52.4 ± 5.3 s (61%) after treatment with ASA, morphine, EBFM, ELFM, ELFM-Hex, ELFM-DCM, and ELFM-EtOAc at doses of 30 mg/kg, respectively. In the inflammatory phase, the reactivity time to formalin was reduced from 124.3 ± 25.9 s (100%) to 49.7 ± 4.7 s (40%), 9.8 ± 4.3 s (8%), 32.5 ± 8.5 s (26%), 59.8 ± 16.8 s (48%), and 54.4 ± 7.3 s (44%) after treatment with ASA, morphine, EBFM, ELFM, and ELFM-Hex at doses of 30 mg/kg, respectively. A reversal of the antinociceptive action of EBFM and ELFM was observed in the inflammatory phase after treatment with atropine, a muscarinic antagonist, and naloxone, an opioid antagonist, respectively. In the hot plate test, EBFM showed Antinociceptive Activity (AA) of 62.6 ± 9.2% after 90 min; however, there was a reversal of AA to 8.6 ± 2.8% when naloxone was used. The UHPLC-MS/MS metabolite analysis revealed the presence of loliolide (3), luteolin (13), lupeol (14), gallic acid (15), chlorogenic acid (16), pygenic acid A (17), and other metabolites from the alkaloids and fatty acids classes.

Metabolomics Analysis of Phenolic Composition and Content in Five Pear Cultivars Leaves.

Phenolic compounds are the predominant chemical constituents in the secondary metabolites of plants and are commonly found in pears. In this study, we focused on the analysis of the phenolic composition and antioxidant activity of leaves from five pear cultivars (Cuiguan, Chaohong, Kuerle, Nanguoli, and Yali) and tea leaves (Fudingdabai as the control) using ultra-performance liquid chromatography coupled with electrospray ionization triple quadrupole mass spectrometry. The results indicated significant differences in the amount and composition of phenolic metabolites between tea and pear leaves, as well as among the five pear varieties. Only approximately one-third of the metabolites exhibited higher levels in pear leaves compared to that in tea leaves. The total phenol content in the Yali cultivar was higher than that in the other pear cultivars. Furthermore, specific phenolic metabolites with high expression were identified in the leaves of different groups. The levels of delphinidin 3-glucoside, aesculin, prunin, cosmosiin, quercetin 3-galactoside, isorhamnetin-3-O-glucoside, nicotiflorin, narcissin, chlorogenic acid, and cryptochlorogenic acid were relatively high among the five pear cultivars. (-)-Gallocatechin gallate, 6-methylcoumarin, aesculetin, hesperidin, kaempferol, and caftaric acid were identified as specific metabolic substances unique to each type of pear leaf. Most of the differential metabolites showed positive correlations and were primarily enriched in the flavonoid biosynthesis, flavone and flavonol biosynthesis, and phenylpropanoid biosynthesis pathways. DPPH (1,1-Diphenyl-2-picrylhydrazyl radical) analysis indicated that the Yali cultivar exhibited the highest antioxidant activity compared to other varieties. This systematic analysis of the differences in phenolic metabolite composition and antioxidant activity between pear and tea leaves provides a theoretical foundation for the development and utilization of pear leaf resources.

Determination of azodicarbonamide in flour samples using high-performance liquid chromatography–tandem mass spectrometry with xanthydrol pre-column derivatisation

Azodicarbonamide (ADA) is approved as a food additive in flour products due to its oxidising and bleaching properties. However, it is prohibited in Australia and Europe on account of its toxicity and the risk of causing asthma in humans. A method was developed to determine ADA in actual flour samples. This work presents an optimised methodology based on derivatisation and clean-up procedures followed by ultra-performance liquid chromatography coupled with electrospray ionisation tandem mass spectrometry (UPLC–ESI-MS/MS). The analytical method was successfully validated. An excellent result was obtained for the linearity of matrix-matched calibration curves (R 2 > 0.99) in the concentration range of 0.10–80 mg/kg. The recovery rate varied from 81.7% to 102.3%. The relative standard deviations (RSDs) of repeatability (n = 6) were 1.3–4.1%, and inter-day RSDs (n = 6) were 2.2–4.8%. The limit of detection and the limit of quantification were 0.014 and 0.042 mg/kg, which were significantly lower than the requirement of 45 mg/kg stipulated in the Chinese National Food Safety Standard (GB 2760-2014). The detection rate of ADA in 26 flour samples was 23.1%, with the concentration ranging from 0.023 to 23.2 mg/kg.