Electron Transport Research Articles

Polypyrrole deposited on the core-shell structured nitrogen-doped porous carbon@Ag-MOF for signal amplification detection of chloride ions.

An electrochemical platform for signal amplification probing chloride ions (Cl-) is constructed by the composite integrating core-shell structured nitrogen-doped porous carbon@Ag-based metal-organic frameworks (NC@Ag-MOF) with polypyrrole (PPy). It isbased on the signal of solid-state AgCl derived from Ag-MOF, sinceboth NC and PPy have good electrical conductivityand promote the electron transport capacity of solid-state AgCl. NC@Ag-MOF was firstly synthesized with NC as the scaffold and then, PPy was anchored on NC@Ag-MOF by chemical polymerization. The composite NC@Ag-MOF-PPy was utilized to modify theelectrode, which exhibited a higher peak current and lower peak potential during Ag oxidation compared with those of Ag-MOF and NC@Ag-MOF-modified electrodes. More importantly, in the coexistence of chloride (Cl-) ions in solution, theNC@Ag-MOF-PPy-modified electrode displayed a fairly stable and sharp peak of solid-state AgCl with the peak potentials gradually approaching zero, which might effectively overcome the background interference caused by electroactive substances. Theoxidation peak currents of solid-state AgCl increased linearly with the concentrationof Cl- ions in a broad range of 0.15µM-40mM and 40-250mM, with detection limits of 0.10µM and 40mM, respectively. Thepractical applicability for Cl- ions determinationwas demonstrated usinghuman serum and urinesamples. Theresults suggest that NC@Ag-MOF-PPy composite could be a promising candidate for the construction of the electrochemical sensor.

Plasma Dynamics and Electron Transport in a Hall-Thruster-Representative Configuration with Various Propellants: I—Variations with Discharge Voltage and Current Density

The results from a wide-ranging parametric investigation into the behavior of the collisionless partially magnetized plasma discharge of three propellants—xenon, krypton, and argon—are reported in this two-part article. These studies are performed using high-fidelity reduced-order particle-in-cell (PIC) simulations in a 2D configuration that represents an axial–azimuthal cross-section of a Hall thruster. In this part I paper, we discuss the effects of discharge voltage and current density (mass flow rate). Our parametric studies assess the spectra of the resolved instabilities under various plasma conditions. We evaluate the ability of the relevant theories from the literature to explain the variations in the instabilities’ characteristics across the studied plasma parameter space and for various propellants. Moreover, we investigate the changes in the electrons’ cross-magnetic-field transport, as well as the significance of the contribution of different momentum terms to this phenomenon across the analyzed cases. In terms of salient observations, the ion acoustic instability (IAI)-related modes are found to be dominant across the simulation cases, with the ion transit time instability also seen to develop at low current density values. Across the explored parameter space, the instabilities have the main contributions to the electrons’ transport within the plume region. The peak of the electric momentum force term, representing the effect of the instabilities, overall shifts toward the plume as either the current density or the discharge voltage increases. The numerical findings are compared against relevant experimental observations reported in the literature.

Non-thermal electrons in an eruptive solar event: Magnetic structure, confinement, and escape into the heliosphere

Filament eruptions and coronal mass ejections (CMEs) reveal large-scale instabilities of magnetic structures in the solar corona. Some of them are accompanied by radio emission, which at decimetric and longer wavelengths is a signature of electron acceleration that may be different from the acceleration in impulsive flares. The radio emission is part of the broadband continua at decimetre and metre wavelengths called type IV bursts. In this article we investigate a particularly well-observed combination of a filament eruption seen in Halpha and at extreme ultraviolet (EUV) wavelengths and a moving type IV burst on 2021 August 24. The aim is to shed light on the relationship between the large-scale erupting magnetic structure and the acceleration and transport of non-thermal electrons. We used imaging observations of a moving radio source and associated burst groups with the refurbished Nan c ay Radioheliograph and whole-Sun radio spectrography from different ground-based and space-borne instruments, in combination with X-ray, radio, and in situ electron observations at tens of keV from Solar Orbiter and EUV imaging by SDO/AIA. The radio sources are located with respect to the erupting magnetic structure traced by the filament (EUV 30.4 nm), and the timing of the electrons detected in situ is compared with the timing of the different radio emissions. We find that the moving radio source is located at the top of the erupting magnetic structure outlined by the filament, which we interpret as a magnetic flux rope. The flux rope erupts in a strongly non-radial direction, guided by the overlying magnetic field of a coronal hole. The electrons detected at Solar Orbiter are found to be released mainly in two episodes, 10 to 40 minutes after the impulsive phase. The releases coincide with two groups of radio bursts, which originate respectively on the flank and near the top of the erupting flux rope. The observation allows an unusually clear association between a moving type IV radio burst, an erupting magnetic flux rope as core structure of a CME, and particle releases into the heliosphere. Non-thermal electrons are confined in the flux rope. Electrons escape to the heliosphere mainly in two distinct episodes, which we relate to magnetic reconnection between the flux rope and ambient open field lines.

Triaxial strain enhanced thermoelectric performance and conversion efficiency in Tl3TaSe4

Thermoelectric (TE) materials have garnered significant attention due to their potential in converting waste heat into useful electrical energy. Strain engineering has emerged as a promising strategy for tailoring the properties of materials, offering opportunities to optimize TE performance. In this study, we employ first-principles calculations to investigate the electronic and thermal transport properties of cubic Tl3TaSe4 under triaxial strain. Our results demonstrate that tensile strain can reduce the effective mass of carriers and contribute to high carrier mobility. The phonon calculation and AIMD simulation reveal excellent dynamic stability and thermal stability of Tl3TaSe4 both with and without strain. The red shift phenomenon of phonon vibration modes and the higher portion of phonon DOS in the low frequency region indicate that tensile strain enhances the anharmonicity of Tl3TaSe4. In addition, triaxial tensile strain can effectively reduce the heat capacity, group velocity, and phonon lifetime, while enhancing the anharmonicity of Tl3TaSe4, which contributes to the lower κl. Compared to the condition without strain, the room temperature κl of Tl3TaSe4 under 1 % and 2 % tensile strain is reduced by about 43 % and 79 %, respectively. Furthermore, the tensile strain exhibits a positive enhancement effect on the ZT value of Tl3TaSe4. At 700 K, the optimal ZT values of p-type and n-type Tl3TaSe4 under 2 % tensile strain are 1.31 and 0.94, respectively, which are three times higher than that of 0.4 and 0.33 without strain. Finally, the TE conversion efficiency of Tl3TaSe4 under 2 % tensile strain is 6.8 %, which is higher than BiCuSeO and α-Cu2+xSe, and comparable to SnSe. Our results demonstrate the effectiveness of triaxial tensile strain in enhancing the phonon scattering, reducing the κl, and improving the TE properties of Tl3TaSe4.

Electric-Field-Driven Localization of Molecular Nanowires in Wafer-Scale Nanogap Electrodes.

As integrated circuits continue to scale toward the atomic limit, bottom-up processes, such as epitaxial growth, have come to feature prominently in their fabrication. At the same time, chemistry has developed highly tunable molecular semiconductors that can perform the functions of ultimately scaled circuit components. Hybrid techniques that integrate programmable structures comprising molecular components into devices however are sorely lacking. Here we demonstrate a wafer-scale process that directs the localization of a conductive polymer, Mw = 20 kg mol-1 polyaniline, from dilute solutions into 50 nm vertical nanogap device architectures using electric-field-driven self-assembly. The resulting metal-polymer-metal junctions were characterized by electron microscopy, Raman spectroscopy and transport measurements demonstrating that our technique is highly selective, assembling conductive polymers only in electrically activated nanogaps. Our results represent a step toward scalable hybrid nanoelectronics that seamlessly integrate established lithographic top-down fabrication with bottom-up synthesized molecular functional circuit components.

Giant Enhancement of Hole Mobility for 4H-Silicon Carbide through Suppressing Interband Electron-Phonon Scattering.

4H-silicon carbide (4H-SiC) possesses a high Baliga figure of merit, making it a promising material for power electronics. However, its applications are limited by low hole mobility. Herein, we found that the hole mobility of 4H-SiC is mainly limited by the strong interband electron-phonon scattering using mode-level first-principles calculations. Our research indicates that applying compressive strain can reverse the sign of crystal-field splitting and change the ordering of electron bands close to the valence band maximum. Therefore, the interband electron-phonon scattering is severely suppressed and the electron group velocity is significantly increased. The out-of-plane hole mobility of 4H-SiC can be greatly enhanced by ∼200% with 2% uniaxial compressive strain applied. This work provides new insights into the electron transport mechanisms in semiconductors and suggests a strategy to improve hole mobility that could be applied to other semiconductors with hexagonal crystalline geometries.

UPF1 deficiency enhances mitochondrial ROS which promotes an immunosuppressive microenvironment in pancreatic ductal adenocarcinoma

Upstream frameshift 1 (UPF1) is an RNA helicase involved in a number of mRNA regulatory processes including nonsense-mediated decay. Mutations in the UPF1 locus that reduce its expression have been associated with adenosquamous carcinoma of the pancreas, a particularly aggressive form of the disease. To determine the effect of Upf1 suppression in a murine model of pancreatic adenocarcinoma, we silenced with shRNA Upf1 in cells derived from an autochthonous tumor in an LSL-Kras G12D/+ ; Trp53 R172H/+ ; Pdx-1 Cre/+ mouse (KPC) and orthotopically implanted these cells in the pancreas of C57BL/6 mice. Tumors derived from Upf1-deficient cells were markedly larger than those derived from control cells, a difference observed only in immunocompetent mice. The immune infiltrate of Upf1-deficient tumors was enriched in myeloid-derived suppressor cells (MDSCs) and depleted of CD8 + cells compared to control KPC tumors. Upf1-deficient KPC cells secreted inflammatory cytokines including G-CSF and CXCL2, known to recruit MDSCs. Cytokine secretion from Upf1-deficient KPC cells was induced by increased levels of mitochondrial reactive oxygen species (ROS), which in turn were due to an increase in complex I activity in the electron transport chain. Thus, Upf1 helicase deficiency leads to increased mitochondrial complex I activity which produces ROS that signals for cytokine release that drives immune suppression and enhanced tumor growth.

Activating Excellent Electromagnetic Wave Absorption of Micromorphology-Optimized Cu/C Nanocomposite Fibers via a Metal-Organic Framework Template-Assisted Strategy.

Morphological engineering is crucial for conceiving high-efficiency electromagnetic wave (EMW) absorption materials. However, for carbon fiber-based composites, the management of micromorphology is significantly astricted by complex fabrication. It remains highly challenging to clarify the micromorphological influences on the EMW loss mechanism of carbon fiber-based absorption materials. In this work, micromorphology-optimized Cu/C nanocomposite fibers are prepared by virtue of a metal-organic framework (MOF) template-assisted strategy. Through skillfully grafting the morphology-regulation capacity of MOFs onto composite fibers, the Oswald maturation and particle distribution issues of Cu nanoparticles are settled, and the efficient electron transport pathways are established by the bead-like structure of the fiber matrix. Compared to prepared conventional Cu/C nanocomposite fibers, the MOF template-assisted strategy stimulates a remarkable leap in EMW absorption performance. The minimum reflection loss value of Cu/C-40 can reach -64.5 dB, 15.96 times lower than that of a conventional sample (Cu/C-2). The maximum effective absorption bandwidth extends to 6.08 GHz, contrasting the ineffective performance of Cu/C-2. Systematic research demonstrates that the enabled graphite-catalytic function of Cu nanoparticles collaborated with an optimized conductive network structure plays a pivotal role in creating field-induced leakage currents, facilitating conductive loss, the primary contributor to EMW dissipation. This work establishes a correlation mechanism between micromorphology and EMW loss, presenting a compelling example of customizable carbon fiber-based absorbers.

Self-heating effects and switching dynamics in graphene multiterminal Josephson junctions

We experimentally investigate the electronic transport properties of a three-terminal graphene Josephson junction. We find that self-heating effects strongly influence the behavior of this multiterminal Josephson junction (MTJJ) system. We show that existing simulation methods based on resistively and capacitively shunted Josephson junction networks can be significantly improved by taking into account these heating effects. We also investigate the phase dynamics in our MTJJ by measuring its switching current distribution and find correlated switching events in different junctions. We show that the switching dynamics is governed by phase diffusion at low temperatures. Furthermore, we find that self-heating introduces additional damping that results in overdamped I−V characteristics when normal and supercurrents coexist in the device. Published by the American Physical Society 2024

Modulating Buried Interface to Achieve an Ultra‐High Open Circuit Voltage in Triple Cation Perovskite Solar Cells

AbstractThis work proposes a methodology to increase the open‐circuit voltage of perovskite solar cells via modulating the buried interface using π‐conjugated molecules, featuring a push‐pull electronic structure configuration. In the planar perovskite solar cells using tin oxide nanocrystal as an electron transport layer, the 2‐methyl‐1‐aminobenzene derivatives with 4‐(Heptafluoropropan)‐2‐methylaniline notable not only reduce the interfacial energy barrier but also passivate the defects at the buried interface. This modulation enhances the open circuit voltage of Cs0.05(FA0.85MA0.15)0.95Pb(I0.85Br0.15)3 (bandgap ≈1.60 eV) perovskite solar cell to a high value of 1.241 V and thus the power conversion efficiency to 24.16% under standard testing condition. An even higher efficiency of 25.11% can be achieved when employing in the Cs0.05MA0.05FA0.9PbI3 (bandgap ≈1.54 eV) perovskite solar cell. The open circuit voltage (1.241 V) is among the highest in triple‐cation perovskite solar cells which reaches 95% Shockley–Queisser limit. A solar‐to‐CO conversion efficiency of 11.76% can be achieved in the fabricated perovskite solar minimodule driven carbon dioxide electrolyzer. This demonstrates the potential of utilizing perovskite solar cells for CO2 conversion as a clean and green energy environment.

Versatile Method for Preparing Two-Dimensional Metal Dihalides.

Ever since the ground-breaking isolation of graphene, numerous two-dimensional (2D) materials have emerged with 2D metal dihalides gaining significant attention due to their intriguing electrical and magnetic properties. In this study, we introduce an innovative approach via anhydrous solvent-induced recrystallization of bulk powders to obtain crystals of metal dihalides (MX2, with M = Cu, Ni, Co and X = Br, Cl, I), which can be exfoliated to 2D flakes. We demonstrate the effectiveness of our method using CuBr2 as an example, which forms large layered crystals. We investigate the structural properties of both the bulk and 2D CuBr2 using X-ray diffraction, along with Raman scattering and optical spectroscopy, revealing its quasi-1D chain structure, which translates to distinct emission and scattering characteristics. Furthermore, microultraviolet photoemission spectroscopy and electronic transport reveal the electronic properties of CuBr2 flakes, including their valence band structure. We extend our methodology to other metal halides and assess the stability of the metal halide flakes in controlled environments. We show that optical contrast can be used to characterize the flake thicknesses for these materials. Our findings demonstrate the versatility and potential applications of the proposed methodology for preparing and studying 2D metal halide flakes.

Chloroplastic ascorbate modifies plant metabolism and may act as a metabolite signal regardless of oxidative stress.

Ascorbate is a major plant metabolite that plays crucial roles in various processes, from reactive oxygen scavenging to epigenetic regulation. However, to what extent and how ascorbate modulates metabolism is largely unknown. We investigated the consequences of chloroplastic and total cellular ascorbate-deficiencies by studying chloroplastic ascorbate-transporter mutant lines lacking PHOSPHATE TRANSPORTER 4; 4 (PHT4; 4) , and the ascorbate-deficient vtc2-4 mutant of Arabidopsis (Arabidopsis thaliana). Under regular growth conditions, both ascorbate deficiencies caused minor alterations in photosynthesis, with no apparent signs of oxidative damage. In contrast, metabolomics analysis revealed global and largely overlapping alterations in the metabolome profiles of both ascorbate-deficiency mutants, suggesting that chloroplastic ascorbate modulates plant metabolism. We observed significant alterations in amino acid metabolism, particularly in arginine metabolism, activation of nucleotide salvage pathways, and changes in secondary metabolism. In addition, proteome-wide analysis of thermostability revealed that ascorbate may interact with enzymes involved in arginine metabolism, the Calvin-Benson cycle, and several photosynthetic electron transport components. Overall, our results suggest that, independently of oxidative stress, chloroplastic ascorbate modulates the activity of diverse metabolic pathways in vascular plants and may act as an internal metabolic signal.

Synergizing Electron and Ion Transports of Ti3C2TX MXene Fiber via Dot‐Sheet Heterostructure and Covalent Ti─C─Ti Cross‐Linking for Efficient Charge Storage and Thermal Management

AbstractTi3C2TX MXene with the merits of metallic conductivity, superhigh volumetric capacitance, and efficient absorption of the electromagnetic wave is considered a promising building block for fiber fabrication; nevertheless, the simultaneous improvement in electrochemical charge storage and electrical conductivity/thermal management is seldom achieved for MXene‐based fibers due to the contradictory in material design. Typically, aligned and densified packing of MXene fibers is highly desired for an enhanced intra‐/inter‐flake electron transport; however, the narrowed inter‐layer spacing restricts the kinetics of ion diffusion (the intercalation/de‐intercalation of electrolyte ions) and diminishes the accessible active sites for charge storage. Herein, the electron and ion transports of Ti3C2TX MXene fiber are synergized via a unique dot‐sheet heterostructure covalently bonded by Ti─C─Ti which provides the optimal inter‐layer spacing for rapid ion diffusion and enhances the intra‐/inter‐flake cross‐linking for fast electron transport. As a result, the obtained fiber offers an improved conductivity of 2405 S cm−1, a desirable capacitance of 1597 F cm−3, an impressive energy density of 19.8 mWh cm−3 for the assembled supercapacitor, superior Joule heating performance, and a photo‐thermal temperature. These remarkable attributes enable their practical applications in energy‐supply scenarios, such as powering LEDs and wearable thermal management.

Hif1α-dependent mitochondrial acute O2 sensing and signaling to myocyte Ca2+ channels mediate arterial hypoxic vasodilation

Vasodilation in response to low oxygen (O2) tension (hypoxic vasodilation) is an essential homeostatic response of systemic arteries that facilitates O2 supply to tissues according to demand. However, how blood vessels react to O2 deficiency is not well understood. A common belief is that arterial myocytes are O2-sensitive. Supporting this concept, it has been shown that the activity of myocyte L-type Ca2+channels, the main ion channels responsible for vascular contractility, is reversibly inhibited by hypoxia, although the underlying molecular mechanisms have remained elusive. Here, we show that genetic or pharmacological disruption of mitochondrial electron transport selectively abolishes O2 modulation of Ca2+ channels and hypoxic vasodilation. Mitochondria function as O2 sensors and effectors that signal myocyte Ca2+ channels due to constitutive Hif1α-mediated expression of specific electron transport subunit isoforms. These findings reveal the acute O2-sensing mechanisms of vascular cells and may guide new developments in vascular pharmacology.

High-Capacity and Ultra-Long-Life Mg-Metal Batteries Enabled by Intercalation-Conversion Hybrid Cathode Materials.

The advancement of rechargeable Mg-metal batteries (RMBs) is severely impeded by the lack of suitable cathode materials. Despite the good cyclic stability of intercalation-type compounds, their specific capacity is relatively low. Conversely, the conversion-type cathodes can deliver a higher capacity but often suffer from poor cycling reversibility and stability. Herein, a WSe2/Se intercalation-conversion hybrid material with elemental Se uniformly distributed into WSe2 nanosheets is fabricated via a simple solvothermal method for high-performance RMBs. The uniformly introduced Se confined in WSe2 nanosheets can not only efficiently improve the conductivity of the hybrid cathodes, facilitating the fast electron transport and ion diffusion, but also provide additional specific capacity. Besides, the WSe2 can effectively inhibit the detrimental Se dissolution and polyselenide shuttle, thereby activating the activity of Se and improving its utilization. Consequently, the synergy of intercalation and conversion mechanisms endows WSe2/Se hybrids with superior reversible capacity of 252mAhg-1at 0.1Ag-1 and ultra-long cyclability of up to 5000 cycles at 2.0Ag-1 with capacity retention of 78.1%. This work demonstrates the feasibility of the strategy by integrating intercalation and conversion mechanisms for developing high-performance cathode materials for RMBs.

Ultra-thin SnS2 nanosheets grown on carbon nanofibers with high-performance in sodium-ion energy storage

SnS2 with two-dimensional layered structure has great application promising in the energy storage system due to its super high theoretical capacity. However, the serious volume expansion and low intrinsic conductivity are difficult to meet the commercial application of SnS2 in sodium-ion batteries (SIBs). Herein, SnS2/CNF was successfully prepared by simple electrospinning technique and hydrothermal method. Based on the synergistic effect between ultra-thin nanosheets and carbon nanofibers (CNF), the anode material not only shortened the path of electron transport, but also accelerated the sodium ion reaction kinetics, thus showed outstanding stability and reversibility SIBs. The SnS2/CNF displayed the excellent rate properties (352 mAh g-1 at 5 A g-1) as well as stable long term cycle performance (338 mAh g-1 at 3 A g-1 after 500 cycles). Furthermore, the SnS2/CNF//AC sodium-ion hybrid capacitor (SIHCs) exhibits excellent energy density and power density of 97 Wh kg-1/54 W kg-1. The capacity retention is 81 % after 2500 cycles at 1 A g-1. The SIHCs could light up to 100 LEDs easily, which thus exhibited great practical application potential in energy storage device.

Modeling and Simulation of MAPbI3-Based Solar Cells with SnS2 as the Electron Transport Layer (ETL) and MoS2 as the Hole Transport Layer (HTL)

Modeling and Simulation of MAPbI₃-Based Solar Cells with SnS₂ as the Electron Transport Layer (ETL) and MoS₂ as the Hole Transport Layer (HTL)

Protocellular Heme and Iron-Sulfur Clusters.

ConspectusCentral to the quest of understanding the emergence of life is to uncover the role of metals, particularly iron, in shaping prebiotic chemistry. Iron, as the most abundant of the accessible transition metals on the prebiotic Earth, played a pivotal role in early biochemical processes and continues to be indispensable to modern biology. Here, we discuss our recent contributions to probing the plausibility of prebiotic complexes with iron, including heme and iron-sulfur clusters, in mediating chemistry beneficial to a protocell. Laboratory experiments and spectroscopic findings suggest plausible pathways, often facilitated by UV light, for the synthesis of heme and iron-sulfur clusters. Once formed, heme displays catalytic, peroxidase-like activity when complexed with amphiphiles. This activity could have been beneficial in two ways. First, heme could have catalytically removed a molecule (H2O2) that could have had degradative effects on a protocell. Second, heme could have helped in the synthesis of the building blocks of life by coupling the reduction of H2O2 with the oxidation of organic substrates. The necessity of amphiphiles to avoid the formation of inactive complexes of heme is telling, as the modern-day electron transport chain possesses heme embedded within a lipid membrane. Conversely, prebiotic iron-sulfur peptides have yet to be reported to partition into lipid membranes, nor have simple iron-sulfur peptides been found to be capable of participating in the synthesis of organic molecules. Instead, iron-sulfur peptides span a wide range of reduction potentials complementary to the reduction potentials of hemes. The reduction potential of iron-sulfur peptides can be tuned by the type of iron-sulfur cluster formed, e.g., [2Fe-2S] versus [4Fe-4S], or by the substitution of ligands to the metal center. Since iron-sulfur clusters easily form upon stochastic encounters between iron ions, hydrosulfide, and small organic molecules possessing a thiolate, including peptides, the likelihood of soluble iron-sulfur clusters seems to be high. What remains challenging to determine is if iron-sulfur peptides participated in early prebiotic chemistry or were recruited later when protocellular membranes evolved that were compatible with the exploitation of electron transfer for the storage of energy as a proton gradient. This problem mirrors in some ways the difficulty in deciphering the origins of metabolism as a whole. Chemistry that resembles some facets of extant metabolism must have transpired on the prebiotic Earth, but there are few clues as to how and when such chemistry was harnessed to support a (proto)cell. Ultimately, unraveling the roles of hemes and iron-sulfur clusters in prebiotic chemistry promises to deepen our understanding of the origins of life on Earth and aids the search for life elsewhere in the universe.

Alfalfa Mosaic Virus and White Clover Mosaic Virus Combined Infection Leads to Chloroplast Destruction and Alterations in Photosynthetic Characteristics of Nicotiana benthamiana

Alfalfa mosaic virus (AMV) is one of the most widely distributed viruses; it often exhibits combined infection with white clover mosaic virus (WCMV). Even so, little is known about the effects of co-infection with AMV and WCMV on plants. To determine whether there is a synergistic effect of AMV and WCMV co-infection, virus co-infection was studied by electron microscopy, the double-antibody sandwich enzyme-linked immunosorbent assay (DAS-ELISA), and real-time fluorescence quantitative PCR (RT-qPCR) of AMV and WCMV co-infection in Nicotiana benthamiana. Meanwhile, measurements were carried out on the photosynthetic pigments, photosynthetic gas exchange parameters, and chlorophyll fluorescence parameters. The results showed that the most severe disease development was induced by AMV and WCMV co-infection, and the disease grade was scale 7. N. benthamiana leaves induced mottled yellow-green alternating patterns, leaf wrinkling, and chlorosis, and chloroplasts were observed to be on the verge of disintegration. The relative accumulation of AMV CP and WCMV CP was significantly increased by 15.44-fold and 10.04-fold upon co-infection compared to that with AMV and WCMV single infection at 21 dpi. In addition, chlorophyll a, chlorophyll b, total chlorophyll, the net photosynthetic rate, the water use efficiency, the apparent electron transport rate, the PSII maximum photochemical efficiency, the actual photochemical quantum yield, and photochemical quenching were significantly reduced in leaves co-infected with AMV and WCMV compared to AMV- or WCMV-infected leaves and CK. On the contrary, the carotenoid content, transpiration rate, stomatal conductance, intercellular CO2 concentration, minimal fluorescence value, and non-photochemical quenching were significantly increased. These findings suggest that there was a synergistic effect between AMV and WCMV, and AMV and WCMV co-infection severely impacted the normal function of photosynthesis in N. benthamiana.

Endless Dirac nodal lines and high mobility in kagome semimetal Ni3In2Se2 : a theoretical and experimental study

Kagome-lattice crystal is crucial in quantum materials research, exhibiting unique transport properties due to its rich band structure and the presence of nodal lines and rings. Here, we investigate the electronic transport properties and perform first-principles calculations for Ni3In2Se2kagome topological semimetal. First-principles calculations of the band structure without the inclusion of spin-orbit coupling (SOC) shows that three bands are crossing the Fermi level (EF), indicating the semi-metallic nature. With SOC, the band structure reveals a gap opening of the order of 10 meV.Z2index calculations suggest the topologically nontrivial natures (ν0;ν1ν2ν3) = (1;111) both without and with SOC. Our detailed calculations also indicate six endless Dirac nodal lines and two nodal rings with aπ-Berry phase in the absence of SOC. The temperature-dependent resistivity is dominated by two scattering mechanisms:s-dinterband scattering occurs below 50 K, while electron-phonon (e-p) scattering is observed above 50 K. The magnetoresistance (MR) curve aligns with the theory of extended Kohler's rule, suggesting multiple scattering origins and temperature-dependent carrier densities. A maximum MR of 120% at 2 K and 9 T, with a maximum estimated mobility of approximately 3000 cm2V-1s-1are observed. Ni3In2Se2is an electron-hole compensated topological semimetal, as we have carrier density of electron (ne) and hole (nh) arene≈nh, estimated from Hall effect data fitted to a two-band model. Consequently, there is an increase in the mobility of electrons and holes, leading to a higher carrier mobility and a comparatively higher MR. The quantum interference effect leading to the two dimensional (2D) weak antilocalization effect (-σxx∝ln(B)) manifests as the diffusion of nodal line fermions in the 2D poloidal plane and the associated encircling Berry flux of nodal-line fermions.