Electron Spin Resonance Measurements Research Articles

Small changes, big impact: radical formation of perylene monoimides in photoredox catalysis

The use of organic molecules as photosensitizers in photoredox catalysis is an attractive research field as it has the potential to replace conventionally used photosensitizers, which are based on rare metals. In the context of light‐driven hydrogen evolution catalysis, the radical formation of two perylene monoimide dyes (PMIs) was studied by means of electron paramagnetic resonance (EPR) and UV/Vis spectroscopy. The PMIs were reduced and oxidized both photochemically and electrochemically to study the changes in absorption and EPR signature. A distinct differentiation between the two PMIs as well as a comparison between the oxidative and reductive processes can be made by EPR measurements. UV/Vis measurements showed different features under redox conditions. This study addresses a gap in understanding the radical intermediate formation during photocatalytic processes.

Frequency multiplexing enables parallel multi-sample EPR

Electron paramagnetic resonance (EPR) spectroscopy stands out as a powerful analytical technique with extensive applications in the fields of biology, chemistry, physics, and material sciences. It proves invaluable for investigating the molecular structure and reaction mechanisms of substances containing unpaired electrons, such as metal complexes, organic and inorganic radicals, and intermediate states in chemical reactions. However, despite their remarkable capabilities, EPR systems face significant limitations in terms of sample throughput, as current commercial systems only target the analysis of one sample at a time. Here we introduce a novel scheme for conducting ultra-high frequency continuous-wave EPR (CW EPR) targeting the EPR spectroscopy of multiple microliter volume samples in parallel. Our proof-of-principle prototype involves two decoupled detection cells equipped with high qualty factor Q=104\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$Q=104$$\\end{document} solenoidal coils tuned to 488 and 589 MHz, ensuring a significant frequency gap for effective radio frequency (RF) decoupling between the channels. To further enhance electromagnetic decoupling, an orthogonal alignment of the coils was adopted. The paper further presents an innovative radiofrequency circuit concept that utilizes a single physical RF channel to simultaneously conduct parallel EPR on up to eight cells. Parallel EPR experiments on two BDPA samples, each with a sample volume of 18.3 μL, registered signal-to-noise ratios of 255 and 252 for the two EPR measurement cells, with no observable coupling. The showcased prototype, built using cost-effective commercially available fabrication technology, is readily scalable and represents an initial step with promising potential for advancing sample screening with high-throughput parallel EPR.

The Dynamic Plasticity of P. aeruginosa CueR Copper Transcription Factor upon Cofactor and DNA Binding.

Bacteria use specialized proteins, like transcription factors, to rapidly control metal ion balance. CueR is a Gram-negative bacterial copper regulator. The structure of E. coli CueR complexed with Cu(I) and DNA was published, since then many studies have shed light on its function. However, P. aeruginosa CueR, which shows high sequence similarity to E. coli CueR, has been less studied. Here, we applied room-temperature electron paramagnetic resonance (EPR) measurements to explore changes in dynamics of P. aeruginosa CueR in dependency of copper concentrations and interaction with two different DNA promoter regions. We showed that P. aeruginosa CueR is less dynamic than the E. coli CueR protein and exhibits much higher sensitivity to DNA binding as compared to its E. coli CueR homologue. Moreover, a difference in dynamical behavior was observed when P. aeruginosa CueR binds to the copZ2 DNA promoter sequence compared to the mexPQ-opmE promoter sequence. Such dynamical differences may affect the expression levels of CopZ2 and MexPQ-OpmE proteins in P. aeruginosa. Overall, such comparative measurements of protein-DNA complexes derived from different bacterial systems reveal insights about how structural and dynamical differences between two highly homologous proteins lead to quite different DNA sequence-recognition and mechanistic properties.

Theoretical study on the mechanism of alcohol photooxidation on Nb2O5 surface.

Theoretical modeling of the solid-state photocatalysis is one of the important issues as various useful photocatalysts have been developed to date. In this work, we investigated the mechanism of the alcohol photooxidation on niobium oxide (Nb2O5) which was experimentally developed, using the density functional theory (DFT)/time-dependent (TD)DFT calculations based on the cluster model. The alcohol adsorption and the first hydrogen transfer from hydroxy group to surface occur in the ground state, while the second hydrogen transfer from CH proceeds in the excited states during the photoirradiation of UV or visible light. The spin crossing was identified and the low-lying triplet states were solved for the reaction pathway. The photoabsorption in the visible light region was characterized as the charge transfer transition from O 2p of alcohol to Nb 4d of the Nb2O5 surface. The spin density and the natural population analysis indicated the generation of spin density in the moiety of carbonyl compound and its dissipation to the interface of the surface, which partly explains the electron paramagnetic resonance measurement. It was confirmed that the rate determining step is the desorption of carbonyl compound and water molecule in agreement with the experimental rate equation analysis. The present findings with the theoretical modeling will provide useful information for the further studies of the solid-state photocatalysis.

Copper(II) coordination to the intrinsically disordered region of SARS-CoV-2 Nsp1

The intrinsically disordered C-terminal peptide region of severe acute respiratory syndrome coronavirus 2 nonstructural protein-1 (Nsp1-CT) inhibits host protein synthesis by blocking messenger RNA (mRNA) access to the 40S ribosome entrance tunnel. Aqueous copper(II) ions bind to the disordered peptide with micromolar affinity, creating a possible strategy to restore protein synthesis during host infection. Electron paramagnetic resonance (EPR) and tryptophan fluorescence measurements on a 10-residue model of the disordered protein region (Nsp1-CT10), combined with advanced quantum mechanics calculations, suggest that the peptide binds to copper(II) as a multidentate ligand. Two optimized computational models of the copper(II)-peptide complexes were derived: One corresponding to pH 6.5 and the other describing the complex at pH 7.5 to 8.5. Simulated EPR spectra based on the calculated model structures are in good agreement with experimental spectra.

Mechanism of Anti-Trypanosoma cruzi Action of Gold(I) Compounds: A Theoretical and Experimental Approach

In the search for a more effective chemotherapy for the treatment of Chagas’ disease, caused by Trypanosoma cruzi parasite, the use of gold compounds may be a promising approach. In this work, four gold(I) compounds [AuCl(HL)], (HL = bioactive 5-nitrofuryl containing thiosemicarbazones) were studied. The compounds were theoretically characterized, showing identical chemical structures with the metal ion located in a linear coordination environment and the thiosemicarbazones acting as monodentate ligands. Cyclic voltammetry and Electron Spin Resonance (ESR) studies demonstrated that the complexes could generate the nitro anion radical (NO2−) by reduction of the nitro moiety. The compounds were evaluated in vitro on the trypomastigote form of T. cruzi and human cells of endothelial morphology. The gold compounds studied showed activity in the micromolar range against T. cruzi. The most active compounds (IC50 of around 10 μM) showed an enhancement of the antiparasitic activity compared with their respective bioactive ligands and moderate selectivity. To get insight into the anti-chagasic mechanism of action, the intracellular free radical production capacity of the gold compounds was assessed by ESR and fluorescence measurements. DMPO (5,5-dimethyl-1-pirroline-N-oxide) spin adducts related to the bioreduction of the complexes and redox cycling processes were characterized. The potential oxidative stress mechanism against T. cruzi was confirmed.

Thermophysical properties of equiatomic CrMnFeCoNi, CrFeCoNi, CrCoNi, and CrFeNi high- and medium-entropy alloys

High- and medium-entropy alloys have emerged as promising materials with significant potential for diverse technical applications. Notably, their use in the field of energy technology has attracted particular interest, where thermophysical properties play a pivotal role. In this context, this study aims to investigate the thermophysical properties, namely thermal expansion behavior, thermal diffusivity, specific heat capacity, thermal conductivity, and the electric resistivity of single-phase face-centered cubic alloys between 300K and 773K. In addition to thermal conductivity, the electric resistivity was measured. Based on the Wiedemann-Franz law, electronic and phononic contributions to the overall thermal conductivity were evaluated. Complementary insights into the electronic state of the investigated materials were obtained by electron spin resonance measurements, revealing the presence of short-range ordering in all alloys. The specific heat capacity is found to dominate the thermal conductivity. Furthermore, the study shows the decisive influence of chemical complexity on the thermophysical properties. Notably, the observed influences extend to the electronic thermal conductivity, pointing out the correlation between composition and heat transport properties. This comprehensive investigation provides a foundation for understanding and tailoring the thermophysical behavior of the studied alloys, offering valuable insights for their targeted deployment in advanced energy applications.

Anatase TiO2/Defective UiO-66 porous octahedral S-scheme heterojunctions toward optimized photocatalytic performance

Photocatalysis is an alternative for antibiotics removal from wastewater for the sustainable development of human society. However, applying photocatalysts for antibiotics (e.g., tetracycline) degradation under practical conditions is highly restricted by the low reaction efficiency due to the prompt charge recombination. Constructing porous heterojunctions is an efficient way to regulate the electron transfer path and accelerate charge migration efficiency. Herein, TiO2/defective UiO-66 porous octahedral S-scheme heterojunctions are successfully fabricated through an in-situ growth strategy. The strong interaction and charge migration behavior between TiO2 and defective UiO-66 have been studied using X-ray photoelectron spectroscopy and electron paramagnetic resonance measurements. The photocatalytic removal efficiency of tetracycline is notably improved by forming TiO2/defective UiO-66 porous heterojunctions. The promoted photocatalytic performance can be ascribed to the strong interaction between TiO2 and defective UiO-66, and the accelerated charge separation and transfer efficiency due to the formation of S-scheme heterojunctions, thus generating abundant reactive oxygen species, including O2− and OH. The optimized 38-TiO2/UiO-66-300 can eliminate 97.9 % of tetracycline in 60 min with a reaction constant rate of 0.0425 min−1, which is approximately 4 and 10 times that of pristine TiO2 and UiO-66-300, respectively. This work provides an alternate strategy for preparing highly active heterojunction photocatalysts for environmental applications.

Surface dielectric resonator for in vivo EPR measurements

This research report describes a novel surface dielectric resonator (SDR) with a flexible connector for in vivo electron paramagnetic resonance (EPR) spectroscopy. Contrary to the conventional cavity or surface loop-gap resonators, the newly developed SDR is constructed from a ceramic dielectric material, and it is tuned to operate at the L-band frequency band (1.15 GHz) in continuous-wave mode. The SDR is designed to be critically coupled and capable of working with both very lossy samples, such as biological tissues, and non-lossy materials. The SDR was characterized using electromagnetic field simulations, assessed for sensitivity with a B1 field-perturbation method, and validated with tissue phantoms using EPR measurements. The results showed remarkably higher sensitivity in lossy tissue phantoms than the previously reported multisegment surface-loop resonators. The new SDR can provide potential new insights for advancements in the application of in vivo EPR spectroscopy for biological measurements, including clinical oximetry.

Protonated g-C3N4/oxygen-doped g-C3N4 S-scheme homojunction fabricated by electrostatic self-assembly for photocatalytic hydrogen evolution and tetracycline hydrochloride degradation

S-scheme photocatalytic systems with high redox ability and separation efficiency of photoexcited charge carriers supply considerable prospects for environmental optimization and sustainable energy development. However, coupling well-suited reduction and oxidation components for target reactions remains a challenge worth exploring. Herein, an efficient S-scheme system for H2 generation and tetracycline hydrochloride (TCH) photodegradation based on protonated g-C3N4 (PCN) coupling with oxygen-doped g-C3N4 (OCN) is fabricated via a facile electrostatic self-assembly strategy. Intimate interfacial interactions originating from the ultrathin nanostructure and staggered energy band arrangement for the S-scheme charge transfer pathway provide compelling advantages for the highly efficient separation of photoinduced electron-hole pairs in the as-designed PCN/OCN homojunction. The in-situ irradiated X-ray photoelectron spectroscopy (ISI-XPS) techniques and electron paramagnetic resonance (EPR) measurements are applied to confirm the successful construction and the validity of the S-scheme charge transfer pathway. The obtained PCN/OCN composites with optimal ratio achieve a decent H2 generation rate of 6184.7 μmol g−1 h−1 outpacing the single PCN by approximately 4.8-fold, and 90.5 % TCH photodegradation efficiency is also realized within 90 min. This work provides a delicate fresh round of elevation for the exploration of an effective photocatalytic system.

Latched detection of zeptojoule spin echoes with a kinetic inductance parametric oscillator.

When strongly pumped at twice their resonant frequency, nonlinear resonators develop a high-amplitude intracavity field, a phenomenon known as parametric self-oscillations. The boundary over which this instability occurs can be extremely sharp and thereby presents an opportunity for realizing a detector. Here, we operate such a device based on a superconducting microwave resonator whose nonlinearity is engineered from kinetic inductance. The device indicates the absorption of low-power microwave wavepackets by transitioning to a self-oscillating state. Using calibrated pulses, we measure the detection efficiency to zeptojoule energy wavepackets. We then apply it to measurements of electron spin resonance, using an ensemble of 209Bi donors in silicon that are inductively coupled to the resonator. We achieve a latched readout of the spin signal with an amplitude that is five hundred times greater than the underlying spin echoes.

Highly efficient peroxymonosulfate activation by CoFe2O4@attapulgite–biochar composites: Degradation properties and mechanism insights

Sulfate radical-based advanced oxidation processes (SR-AOPs) have been considered as a promising approach for degrading organic pollutants. Herein, CoFe2O4 anchored on attapulgite-biochar composites (CoFe2O4@ATP–BC) were synthesized by a sol-gel co-pyrolysis method and showed excellent catalytic performance, reusability and stability in activating peroxymonosulfate (PMS) for the degradation of Rhodamine B (RhB). The effects of PMS concentration, catalyst dosage, temperature, initial pH, NOM and inorganic ions on the removal of RhB were investigated. The radical quenching experiments and electron paramagnetic resonance (EPR) measurement confirmed that 1O2, O2∙− and surface-bound ∙OH and SO4∙− were major reactive oxygen species (ROS) in the RhB degradation by CoFe2O4@ATP–BC/PMS system, indicating that radical and non-radical degradation pathways were both involved. The possible catalytic mechanism of PMS by CoFe2O4@ATP–BC was proposed including the interface reaction and bulk reaction. The main degradation intermediates were identified by liquid chromatograph-mass spectrometry (LC-MS), and three possible degradation pathways of RhB were deduced accordingly. In general, the CoFe2O4@ATP–BC/PMS system provided fundamentals of theoretical and applied research to further develop supported bimetallic oxides for advanced oxidation treatment of organic wastewater.

Dihydropyrazine-reductant effects on band bending at PEDOT:PSS/perovskite interfaces in tin halide perovskite solar cells

This study investigates the effects of reducing treatment by 1,4-bis(trimethylsilyl)-2,3,5,6-tetramethyl-1,4-dihydropyrazine (TM-DHP) additives on band bending in the perovskite surface near poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole-selective contacts in tin-based-perovskite solar cells. We took electron spin resonance (ESR) spectroscopy measurements of PEDOT:PSS/tin perovskite stacks in the dark and under one-sun illumination. The findings indicate that downward band bending is formed in the tin perovskite layer near the PEDOT:PSS layer. This downward bending is not favorable in terms of surface passivation and hole selectivity. On the other hand, upward band bending occurs in stacks including tin perovskite layers with TM-DHP additives, indicating that TM-DHP prevents oxidation of tin perovskite, thus unfavorable downward band bending. ESR measurements of PEDOT:PSS/tin perovskite stacks without TM-DHP under illumination suggest reduction in the number of polarons caused by electron transport from perovskite layers toward PEDOT:PSS, which is driven by the unfavorable downward band bending. However, such electron transport toward PEDOT:PSS is prevented in PEDOT:PSS/tin perovskite stacks with TM-DHP. These findings, which demonstrate TM-DHP effects on interface band bending, are important for realizing highly efficient and stable tin perovskite solar cells.

Construction of Ideal One-Dimensional Spin Chains by Topochemical Dehydration/Rehydration Route.

One-dimensional (1D) Heisenberg antiferromagnets are of great interest due to their intriguing quantum phenomena. However, the experimental realization of such systems with large spin S remains challenging because even weak interchain interactions induce long-range ordering. In this study, we present an ideal 1D S = 5/2 spin chain antiferromagnet achieved through a multistep topochemical route involving dehydration and rehydration. By desorbing three water molecules from (2,2'-bpy)FeF3(H2O)·2H2O (2,2'-bpy = 2,2'-bipyridyl) at 150 °C and then intercalating two water molecules at room temperature (giving (2,2'-bpy)FeF3·2H2O 1), the initially isolated FeF3ON2 octahedra combine to form corner-sharing FeF4N2 octahedral chains, which are effectively separated by organic and added water molecules. Mössbauer spectroscopy reveals significant dynamical fluctuations down to 2.7 K, despite the presence of strong intrachain interactions. Moreover, results from electron spin resonance (ESR) and heat capacity measurements indicate the absence of long-range order down to 0.5 K. This controlled topochemical dehydration/rehydration approach is further extended to (2,2'-bpy)CrF3·2H2O with S = 3/2 1D chains, thus opening the possibility of obtaining other low-dimensional spin lattices.

Chitosan synergizes with bismuth-based metal-organic frameworks to construct double S-type heterojunctions for enhancing photocatalytic antimicrobial activity

In recent years, photocatalytic technology has been introduced to develop a new kind antimicrobial agents fighting antibiotic abusing and related drug resistance. The efforts have focused on non-precious metal photocatalysts along with green additives. In the present work, a novel bis-S heterojunctions based on the coupling of polysaccharide (CS) and bismuth-based MOF (CAU-17) s synthesized through a two-step method involving amidation reaction under mild conditions. The as prepared photocatalyst literally extended the light response to the near-infrared region. Owing to its double S-type heterostructure, the lifetime of the photocarriers is significantly prolonged and the redox capacity are enhanced. As a result, the as prepared photocatalyst indicated inhibition up to 99.9 % under 20 min of light exposure against Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria as well as drug-resistant bacteria (MRSA). The outstanding photocatalytic performance is attributed to the effective charge separation and migration due to the unique double S heterostructure. Such a double S heterostructure was confirmed through transient photocurrent response, electrochemical impedance spectroscopy tests and electron spin resonance measurements. The present work provides a basis for the simple synthesis of high-performance heterojunction photocatalytic inhibitors, which extends the application of CAU-17 in environmental disinfection and wastewater purification.

A Co-doped Ag3PO4 photocatalyst: Efficient degradation of organic pollutants and enhancement mechanism

In this study, an efficient Co-doped Ag3PO4 photocatalyst was prepared by the deposition method. Compared with Ag3PO4, the degradation efficiency of the optimal sample CAP-2 (the mole ratio of Co/Ag was 0.057 %) for MO (20 mgL−1) increased from 53.4 % to 95.0 % within 20 min, and the degradation efficiency for phenol (20 mgL−1) increased from 57.9 % to 91.8 % within 80 min. Moreover, the CAP-2 sample performed excellent mineralization ability and stable recycling capacity. Free radical capture experiments and electron spin resonance (ESR) measurements indicated that holes (h+) and superoxide radicals (⋅O2−) were the main active radicals. Doping Co ions broadened the optical absorption, introduced impurity level to promote the separation of carriers, and generated additional ⋅O2− owing to the mutual conversion of Co3+ and Co2+, thus considerably improving Ag3PO4 photocatalytic performance. This work provides a new reference for doping metal ions modified semiconductor photocatalysts to efficiently degrade organic pollutants.

Machine Learning Isotropic g Values of Radical Polymers.

Methods for electronic structure computations, such as density functional theory (DFT), are routinely used for the calculation of spectroscopic parameters to establish and validate structure-parameter correlations. DFT calculations, however, are computationally expensive for large systems such as polymers. This work explores the machine learning (ML) of isotropic g values, giso, obtained from electron paramagnetic resonance (EPR) experiments of an organic radical polymer. An ML model based on regression trees is trained on DFT-calculated g values of poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) (PTMA) polymer structures extracted from different time frames of a molecular dynamics trajectory. The DFT-derived g values, gisocalc, for different radical densities of PTMA, are compared against experimentally derived g values obtained from in operando EPR measurements of a PTMA-based organic radical battery. The ML-predicted giso values, gisopred, were compared with gisocalc to evaluate the performance of the model. Mean deviations of gisopred from gisocalc were found to be on the order of 0.0001. Furthermore, a performance evaluation on test structures from a separate MD trajectory indicated that the model is sensitive to the radical density and efficiently learns to predict giso values even for radical densities that were not part of the training data set. Since our trained model can reproduce the changes in giso along the MD trajectory and is sensitive to the extent of equilibration of the polymer structure, it is a promising alternative to computationally more expensive DFT methods, particularly for large systems that cannot be easily represented by a smaller model system.

Exploring the Effect of V2O5 and Nb2O5 Content on the Structural, Thermal, and Electrical Characteristics of Sodium Phosphate Glasses and Glass-Ceramics.

Na-V-P-Nb-based materials have gained substantial recognition as cathode materials in high-rate sodium-ion batteries due to their unique properties and compositions, comprising both alkali and transition metal ions, which allow them to exhibit a mixed ionic-polaronic conduction mechanism. In this study, the impact of introducing two transition metal oxides, V2O5 and Nb2O5, on the thermal, (micro)structural, and electrical properties of the 35Na2O-25V2O5-(40 - x)P2O5 - xNb2O5 system is examined. The starting glass shows the highest values of DC conductivity, σDC, reaching 1.45 × 10-8 Ω-1 cm-1 at 303 K, along with a glass transition temperature, Tg, of 371 °C. The incorporation of Nb2O5 influences both σDC and Tg, resulting in non-linear trends, with the lowest values observed for the glass with x = 20 mol%. Electron paramagnetic resonance measurements and vibrational spectroscopy results suggest that the observed non-monotonic trend in σDC arises from a diminishing contribution of polaronic conductivity due to the decrease in the relative number of V4+ ions and the introduction of Nb2O5, which disrupts the predominantly mixed vanadate-phosphate network within the starting glasses, consequently impeding polaronic transport. The mechanism of electrical transport is investigated using the model-free Summerfield scaling procedure, revealing the presence of mixed ionic-polaronic conductivity in glasses where x < 10 mol%, whereas for x ≥ 10 mol%, the ionic conductivity mechanism becomes prominent. To assess the impact of the V2O5 content on the electrical transport mechanism, a comparative analysis of two analogue series with varying V2O5 content (10 and 25 mol%) is conducted to evaluate the extent of its polaronic contribution.

Heteropentanuclear {Ru(II)Cu(II)4} Kuratowski Complexes Assembled from a Ruthenium(II) Precursor Complex to Study Competing Exchange Interactions in M(II)(ta)2 Networks [ta(-) = 1,2,3-Triazolate

We report a directed two-step synthesis toward pentanuclear Kuratowski complexes. First, six 5,6-dimethylbenzo[1,2,3]triazole ligands (Me2btaH) are coordinated to a single Ru(II) ion, providing a topologically ideal template for the addition of further metal ions. The synthesis and crystal structures of [RuCu4X4(Me2bta)6] [X = acetylacetonate (acac) and tris(3,5-dimethyl-1-pyrazolyl)borate (Tp*)] are described. Both represent new members of the family of so-called Kuratowski (K3,3) complexes. The coordination units feature triazolato-bridged metal-centered {MM4} tetrahedra, which are known for frustrated magnetic interactions in both complexes and metal-organic frameworks. The novel Ru(II)-centered complexes were synthesized in order to investigate the influence of the presence or absence of a paramagnetic central metal ion in the Kuratowski complex. Superconducting quantum interference device and electron spin resonance measurements demonstrate that small deviations in bond lengths and valence angles can lead to the formation of pairs of magnetic exchange-coupled Cu(II) ions. Which Cu(II) ions pair up can be predicted in Jahn-Teller active compounds by the overlap of the respective orbitals. These data are compared with those gleaned for M(II)(ta)2 (ta = 1,2,3-triazolate) lattices, in which structurally similar {MM4} tetrahedra constitute the secondary building units.

Azomethine Fe3+ coordination compounds containing carbazole units: Synthetic approach, spectral characterization, and magnetic studies

The main aim of our study is to investigate various types of hybrid systems with a paramagnetic iron (III) ion as a core and photoactive derivatives of carbazole at the periphery. We have synthesized a variety of biligand coordination compounds with the composition [FeL2]A (where L is 2‐[2‐[(E)‐[4‐[4‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)benzoyl]oxy‐2‐phenolate]methyleneamino]ethylamino]ethyl 4‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)benzoate, A− is NO3− (I), Cl− (II), PF6− (III)). These systems were studied by superconducting quantum interference device (SQUID) magnetometry and X‐band electron paramagnetic resonance (EPR) spectroscopy. Magnetic measurements revealed mixed spin states (high spin [HS], low spin [LS]) of Fe (III) ions at room temperatures. Estimates of the corresponding spin contributions were made. It was found that all samples exhibit AFM exchange interactions between iron (III) ions. The ground spin state at 2.0 K was established and analyzed. EPR measurements confirmed the HS states of iron (III) and revealed two types of them: with weak distorted and strong low‐symmetry octahedral crystal fields.