Electronic Environment Research Articles

L10-PtCo and L12-Pt3Co Intermetallics for Oxygen Reduction Reaction: The Influence of Composition and Structure on Properties.

Pt-based intermetallics are regarded as highly efficient electrocatalysts for oxygen reduction reaction (ORR). However, Pt-based intermetallics with different Pt: M atomic ratios have different atomic arrangements and crystal structures, which will change the electronic structure and coordination environment of Pt, thus affecting the electrocatalytic activity. In this work, we prepared L12-Pt3Co and L10-PtCo intermetallic catalysts by modulating the molar ratio of Pt and Co precursors using a thermal annealing method. The mass activity (MA) of L10-PtCo is 0.52 A mg-1 Pt at 0.9 V, which is 1.44 times larger than that of L12-Pt3Co (0.36 A mg-1 Pt). In addition, the MA of L10-PtCo decreases by 17.31 % after 10,000 CV cycles, which is smaller than that of L12-Pt3Co (25.00 % loss in MA), showing excellent structural stability. Theoretical calculations reveal that compared to L12-Pt3Co, L10-PtCo has more electrons transferred to the Pt sites, which further optimizes the electronic structure of Pt and reduces the d-band center, leading to the increase of the electrocatalytic performance. This work provides new insights into the study of Pt-based intermetallics with different Pt: M ratios, which is helpful for the screening and preparation of high-performance Pt-based intermetallics.

STAGES OF THE ADMINISTRATIVE PROCEDURE OF STATE ACCREDITATION IN THE FIELD OF HIGHER EDUCATION

The article is devoted to the consideration of the features of the procedural activity carried out within the framework of state accreditation in the field of higher education. The purpose of the article is to identify problematic issues and develop proposals for improving the regulatory acts governing the relevant administrative procedure. The author’s definition of accreditation expertise is formulated as a special procedure for studying educational activities for a specific educational program, conducted by competent experts with special knowledge in the field of education, within the framework of which accreditation indicators and educational activities of the organisation are compared, which allows determining its quality. The need to exclude from the subject of accreditation expertise such indicators as the average score of the unified state examination of students accepted based on its results for training in higher education programmes, as well as the average score of entrance examinations, is substantiated, since these indicators cannot be attributed to the indicators of the quality of educational activities for a specific educational programme of higher school. The integration of the electronic educational environment of educational institutions with the Federal State Information System “the unified identification and authentication system” is proposed. The necessity of specifying individual deadlines within the stage of accreditation expertise is substantiated, which will help to ensure the right of an educational organisation to timely receive the result of the state service for accreditation of educational activities.

Online interaction of teachers in the system of formation of research skills of students with special educational needs

The article describes the features of creating and using an electronic educational environment for online interaction of teachers. The well-founded importance of online experience exchange between teaching staff for the organization of research activities of students involved in inclusive education. The content of electronic educational modules for teacher collaboration in Google Class is described. The stages of the "World Cafe" as a modern form of interaction between teachers and a practical psychologist in an educational institution, which involves taking into account the educational opportunities of students with different nosologies, are revealed. Based on the results of diagnosing the professional competencies of the teachers of the control and experimental groups, the effectiveness of the proposed online interaction of pedagogical workers with the psychological service of the educational institution was determined.

Magnetic Anisotropic Effects in Charged Aza[10]annulene Analogs with a Non-planar Carbon Framework.

Classically, aromaticity portrays the unique stability and peculiar reactivities of cyclic planar conjugated systems with (4n+2) π electrons. Understanding the electronic environments in new chemical frameworks through experimental and theoretical validation is central to this ever-expanding theme in chemical science. Such investigations in curved π-surfaces have special significance as they can unravel the variations when the planarity requirement is slightly lifted. In this report, we discuss the synthesis,spectroscopicand theoretical studies involving a new group of cyclazine analogs having a charged aza[10]annulene periphery, centrally locked through a sp3 carbon. Magnetic anisotropic effects arising from electron delocalization through its curved π-surface were mapped through a specific set of chemical groups introduced through this sp3 carbon. The nucleus-independent chemical shift calculations revealed negative chemical shift values, indicating the aromatic nature of the aza[10] annulene rim. This is corroborated by a clockwise diatropic ring current, evident from anisotropy-induced current density analysis. Variations in the chemical shift of NMR signals in these systems were also computationally examined through isotropic chemical shielding surface analysis.

Al-N3 Bridge Site Enabling Interlayer Charge Transfer Boosts the Direct Photosynthesis of Hydrogen Peroxide from Water and Air.

Manipulating the electronic environment of the reactive center to lower the energy barrier of the rate-determining water oxidation step for boosting the direct generation of H2O2 from water, air, and sunlight is fascinating yet remains a grand challenge. Driven by a first-principles screening across a series of metal single atoms in carbon nitride, we report a class of an Al-N3 bridge site enabling interlayer charge transfer in carbon nitride nanotubes (CNNT-Al) for the highly efficient photosynthesis of H2O2 directly from water, oxygen, and sunlight. We demonstrate that the interlayered Al-N3 bridge site in CNNT-Al is able to activate the neighboring surface N atom for promoting the rate-determining step of the two-electron water oxidation to H2O2. It is also able to act as a bridge for enhancing the vertical interlaminar charge transfer due to the hybridization between the 3s and 3p states of the interstitial Al atom and the conduction band of two adjacent carbon nitride layers. Collectively, these factors lead to a highest photocatalytic mass activity of 1410.2 μmol g-1 h-1 (with a photocatalyst concentration of 1 g L-1) for direct photosynthesis of H2O2 out of all CN-based photocatalysts and a 7-fold higher solar-to-chemical conversion efficiency (0.73%) compared to that of the natural photosynthesis of typical plants (∼0.1%). Most importantly, the CNNT-Al-based flow reactor can steadily produce H2O2 for 200 h and be directly used for the on-site degradation of organic dye in water. The CNNT-Al-based flow reactor can also kill a 10 times higher concentration of bacteria in deionized water than that in natural water with 100% efficiency, which makes our design economically appealing for practical water treatment.

Gradient-Wettable Multiwedge Patterned Surface for Effective Transport of Droplets against the Temperature Gradient.

With the rapid advancement of electronic integration technology, the requirements for the working environment and stability of the heat dissipation equipment have become increasingly stringent. Consequently, studying a high-efficiency gas-liquid two-phase heat transfer surface holds significant importance. Aiming at the limited liquid transport performance caused by the temperature gradient in the heat transfer process, this paper combines the wetting gradient with the shape gradient and proposes a gradient-wettable multiwedge patterned surface, where droplets can be transported over long distances and at high velocities. In this paper, the effect of the average wetting gradient on droplet transport performance is investigated by designing a multiwedge hydrophilic pattern and adjusting the wetting properties of the hydrophobic region. The study focuses on the temperature gradient resistance of gradient-wettable, multiwedge patterned surfaces, providing a mechanistic explanation of the surface's ability to resist temperature gradients through theoretical analysis. It is shown that the gradient wettability multiwedge patterned surface has better resistance to the temperature gradient that hinders the droplet movement, and the droplets can still achieve transport of ∼38 mm at an average speed of ∼158 mm/s under the temperature gradient of 0.59 °C/mm. The research in this paper provides some insights into the application of temperature gradient resistance on heat transfer surfaces and contributes to heat dissipation methods for electronic integrated environments.

Hybrid 2D/3D carbon framework confined Si with optimized reaction kinetics for highly stable Li-Ion storage

Three-dimensional (3D) conductive skeletons can optimize electron/Li-ion migration kinetics and alleviate stress accumulation for silicon (Si)-based electrodes. In this study, the modified carbon nanotubes (MCNs) are used as a stress-buffering and high-speed conducting framework, and a hierarchical structure of 3D MCNs interspersed with flour-derived 2D N-doped C layer is designed for Si anode via molecular self-assembly and in-situ carbonization strategies. Experimental and theoretical calculations show that the charge redistribution occurred in the fabricated SiOx and N-doped C interfaces, which induced an electric field response and increased the interfacial electron/Li-ion transfer rate. Multiphysics simulations show that the 2D/3D hierarchical structures of carbon can optimize the physicochemical properties, such as a favorable local electronic environment, flexible stress dissipation mechanisms and good thermal stability. The prepared electrode with 77.1 wt% Si@SiOx shows a low volume expansion rate of 23 % and has an excellent Li-ion storage capability (972.1 mAh g−1 at 4000 mA g−1). Moreover, the structural stability of fabricated Si-based electrodes is enhanced, achieving 0.04 % per cycle capacity decay for 500 cycles at 2000 mA g−1. Such integrating the 2D/3D carbon framework to manipulate Si interfacial properties provides fundamental research for other electrodes plagued by significant volume expansion.

Coordination, hydration, and diffusion of vanadyl cations in negatively charged polymer membranes

Charged polymer membranes that selectively transport ions are crucial for advancing electrochemical technologies for water purification, resource recovery, and energy generation/storage. Recent studies suggest that the ion selectivity trends of such membranes are due to ion dehydration at the membrane/solution interface, where ions that require less energy to shed their hydration can partition more favorably into the membrane. However, direct evidence of ion dehydration in polymer membranes at relevant conditions is scarce, with claims based primarily on correlations between ion hydration energies and membrane transport properties. The objective of this study was to investigate the electronic environment, local coordination, and hydration of vanadyl counter-ion in negatively charged membranes with broadly varying water content via x-ray absorption spectroscopy. The results highlight that vanadyl counter-ions maintain similar oxidation state, electronic state, and coordination number in the membranes as in aqueous solutions of vanadyl sulfate and that vanadyl dehydration is unlikely in these membranes. However, as the membrane water content decreases, the vanadyl diffusion coefficient decreases and the activation energy of diffusion increases. We attribute these significant changes in membrane transport properties to increased Coulombic interactions between vanadyl and the fixed charge groups, resulting from a decreased dielectric constant of the membrane, rather than to ion dehydration at the membrane/solution interface. This study represents significant progress in understanding the mechanisms that govern ion transport in charged polymer membranes over a broad range of water content, highlighting the critical role of Coulombic interactions between the fixed charges and mobile ions.

Surface electric fields-enhanced biochar: A dual-action adsorbent and PMS activator for sulfamethoxazole removal

Integrating adsorption with advanced oxidation processes offers significant advantages over conventional single-stage wastewater treatment methodologies. Herein, this study successfully synthesized nitrogen-boron codoped metal-free biochar at 700 °C (700NBBC). 700NBBC effectively eliminates sulfamethoxazole (SMX) from water through a synergistic adsorption-oxidation process, showcasing robust resistance to interference and broad pH tolerance. Characterizations and experimental outcomes indicate that 700NBBC primarily adsorbs SMX through a monolayer surface chemical adsorption mechanism and activates persulfate (PMS) to oxidize SMX via a non-radical mechanism, which includes the generation of singlet oxygen (1O2) and electron transfer processes. Density functional theory calculations elucidate that N and B doping regulate the local electronic environment at biochar surface, enhancing the adsorption energy between biochar and PMS while effectively catalyzing PMS cleavage to generate 1O2. This research offers fresh perspectives on the critical role of heteroatom doping in regulating reactive oxygen species generation within biochar.

Spiral-Concave Prussian Blue Crystals with Rich Steps: Growth Mechanism and Coordination Regulation.

Investigating the formation and transformation mechanisms of spiral-concave crystals holds significant potential for advancing innovative material design and comprehension. We examined the kinetics-controlled nucleation and growth mechanisms of Prussian Blue crystals with spiral concave structures, and constructed a detailed crystal growth phase diagram. The spiral-concave hexacyanoferrate (SC-HCF) crystals, characterized by high-density surface steps and a low stress-strain architecture, exhibit enhanced activity due to their facile interaction with reactants. Notably, the coordination environment of SC-HCF can be precisely modulated by the introduction of diverse metals. Utilizing X-ray absorption fine structure spectroscopy and in situ ultraviolet-visible spectroscopy, we elucidated the formation mechanism of SC-HCF to Co-HCF facilitated by oriented adsorption-ion exchange (OA-IE) process. Both experimental data, and density functional theory confirm that Co-HCF possesses an optimized energy band structure, capable of adjusting the local electronic environment and enhancing the performance of the oxygen evolution reaction. This work not only elucidates the formation mechanism and coordination regulation for rich steps HCF, but also offers a novel perspective for constructing nanocrystals with intricate spiral-concave structures.

Spiral‐Concave Prussian Blue Crystals with Rich Steps: Growth Mechanism and Coordination Regulation

AbstractInvestigating the formation and transformation mechanisms of spiral‐concave crystals holds significant potential for advancing innovative material design and comprehension. We examined the kinetics‐controlled nucleation and growth mechanisms of Prussian Blue crystals with spiral concave structures, and constructed a detailed crystal growth phase diagram. The spiral‐concave hexacyanoferrate (SC‐HCF) crystals, characterized by high‐density surface steps and a low stress‐strain architecture, exhibit enhanced activity due to their facile interaction with reactants. Notably, the coordination environment of SC‐HCF can be precisely modulated by the introduction of diverse metals. Utilizing X‐ray absorption fine structure spectroscopy and in situ ultraviolet‐visible spectroscopy, we elucidated the formation mechanism of SC‐HCF to Co‐HCF facilitated by oriented adsorption‐ion exchange (OA‐IE) process. Both experimental data, and density functional theory confirm that Co‐HCF possesses an optimized energy band structure, capable of adjusting the local electronic environment and enhancing the performance of the oxygen evolution reaction. This work not only elucidates the formation mechanism and coordination regulation for rich steps HCF, but also offers a novel perspective for constructing nanocrystals with intricate spiral‐concave structures.

Operando Spectroelectrochemistry Unravels the Mechanism of CO2 Electrocatalytic Reduction by an Fe Porphyrin.

Iron porphyrins are molecular catalysts recognized for their ability to electrochemically and photochemically reduce carbon dioxide (CO2). The main reduction product is carbon monoxide (CO). CO holds significant industrial importance as it serves as a precursor for various valuable chemical products containing either a single carbon atom (C1), like methanol or methane, or multiple carbon atoms (Cn), such as ethanol or ethylene. Despite the long-established efficiency of these catalysts, optimizing their catalytic activity and stability and comprehending the intricate reaction mechanisms remain a significant challenge. This article presents a comprehensive investigation of the mechanistic aspects of the selective electroreduction of CO2 to CO using an iron porphyrin substituted with four trimethylammonium groups in the para position [(pTMA)FeIII-Cl]4+. By employing infrared and UV/Visible spectroelectrochemistry, changes in the electronic structure and coordination environment of the iron center can be observed in real-time as the electrochemical potential is adjusted, offering new insights into the reaction mechanisms. Catalytic species were identified, and evidence of a secondary reaction pathway was uncovered, potentially prompting a re-evaluation of the nature of the catalytically active species.

C3N4/Se-CNTs as Advanced Metal-Free Catalysts for the Photoassisted Electrocatalytic Oxygen Evolution Reaction.

Photoassisted electrocatalysis is a frontier direction of electrocatalysis for promoting energy conversion. In this work, a metal-free C3N4/Se-CNTs is reported as a novel catalyst for photoassisted electrocatalytic oxygen evolution reaction (OER). C3N4 has an appropriate bandgap, high specific surface area, and long-term stability. CNTs can modulate the electronic environment of C3N4 by strong π-π interaction and greatly enhance the separation efficiency of photogenerated carriers. The distributed Se nanoparticles in CNTs can further increase the charge transfer ability. As a metal-free catalyst, the C3N4/Se-CNTs exhibits an overpotential of 231 mV at a current density of 10 mA cm-2 and a small Tafel slope of 52 mV dec-1 under illumination, which ranks among the best catalysts for photoassisted OER performance, surpassing most noble and transition metal-based catalysts. The result demonstrates the great potential of C3N4-based catalysts in the photoassisted OER process and provides a new perspective to explore the excellent metal-free OER catalysts.

Valence Band-Tunable NiFe Electrocatalyst Triggered by the Dynamic Mo Exudation and Re-Deposition for Superior High Current Density Oxygen Evolution Reaction.

Developing energy- and time-efficient strategies to derive high-performance non-precious electrocatalysts for anodic oxygen evolution reaction (OER), especially stably working at industrial-demanding current density, is still a big challenge. In this work, a concise molten salt erosion scenario was devised to rapidly modulate the smooth surface of the commercial NiMo foam substrate into the rough, electronically coupled, and hierarchically porous Ni/Fe/Mo(oxy)hydroxide catalyst layer assembled by the nanosphere array. This self-supported catalyst is super-hydrophilic for the alkaline electrolyte and distinguished by a balanced Mo leaching/surface-readsorption process to tune the metal d band center and electronic perturbation. The altered electronic environment with the favored OER intermediate adsorption behavior attains the outstanding OER activity in terms of a very small overpotential of 230.21 mV at 10 mA cm-2 and an ultra-long stability for 1179.45 h to sustain the initial commercial-level current density of ca. 1000 mA cm-2. This superb performance transcends most of the edge-cutting transition metal peers reported recently and can satisfy the standards of industrial applications. This industrial-compatible synthesis technology holds profound implications for hydrogen production via water splitting and other electrochemical applications.

Assessing the Noncovalent Interaction of Deucravacitinib and Ethanol with Special Reference to an Independent Gradient Model Based on Hirshfeld Partition.

The current study begins by optimizing the deucravacitinib molecule in the gas phase at the ωB97XD/cc-pVDZ level of theory using density functional theory and proceeds to study its intramolecular interactions. Further, a molecule of EtOH was introduced at different locations on the deucravacitinib molecule, and the noncovalent interactions arising from them were also investigated using several computational tools. In this way, eight deucravacitinib-EtOH systems (1-8) were identified and their electronic environment was studied after evaluating their binding energy. Using natural bond orbital analysis, the localization of charges between the donor and acceptor fragments in these interacting systems was examined. The nature of interactions was analyzed using the reduced gradient approach (NCI analysis), and few hydrogen bonding interactions (intermolecular and intramolecular) were found in each system. The strength of these hydrogen bonding interactions was further investigated by using theoretical tools such as atoms in molecules analysis and independent gradient model based on Hirshfeld partition analysis. The binding energy of deucravacitinib with EtOH was decomposed into energy components based on the domain-based local pair natural orbital coupled cluster technique using LED analysis. The results from the hydrogen bonding interaction analysis using different computational tools were found to be consistent with the calculated order of binding energy of systems 1-8 and they also pointed toward the higher stability of system 3.

Incorporation of Pd Single-Atom Sites in Perovskite with an Excellent Selectivity toward Photocatalytic Semihydrogenation of Alkynes.

Semihydrogenation is a crucial industrial process. Noble metals such as Pd have been extensively studied in semihydrogenation reactions, owing to their unique catalytic activity toward hydrogen activation. However, the overhydrogenation of alkenes to alkanes often happens due to the rather strong adsorption of alkenes on Pd active phases. Herein, we demonstrate that the incorporation of Pd active phases as single-atom sites in perovskite lattices such as SrTiO3 can greatly alternate the electronic structure and coordination environment of Pd active phases to facilitate the desorption of alkenes rather than further hydrogenation. Furthermore, the incorporated Pd sites can be well stabilized without sintering by a strong host-guest interaction with SrTiO3 during the activation of H species in hydrogenation reactions. As a result, the Pd incorporated SrTiO3 (Pd-SrTiO3) exhibits an excellent time-independent selectivity (>99.9 %) and robust durability for the photocatalytic semihydrogenation of phenylacetylene to styrene. This strategy based on incorporation of active phases in perovskite lattices will have broad implications in the development of high-performance photocatalysts for selective hydrogenation reactions.

High Coverage Sub-Nano Iridium Cluster on Core-Shell Cobalt-Cerium Bimetallic Oxide for Highly Efficient Full-pH Water Splitting.

The construction of sub-nanometer cluster catalysts (<1nm) with almost complete exposure of active atoms serves as a promising avenue for the simultaneous enhancement of atom utilization efficiency and specific activity. Herein, a core-shell cobalt-cerium bimetallic oxide protected by high coverage sub-nanometer Ir clusters (denoted as Ir cluster@CoO/CeO2) is constructed by a confined in situ exsolution strategy. The distinctive core-shell structure endows Ir cluster@CoO/CeO2 with enhanced intrinsic activity and high conductivity, facilitating efficient charge transfer and full-pH water splitting. The Ir cluster@CoO/CeO2 achieves low overpotentials of 49/215, 52/390, and 54/243mV at 10mAcm-2 for hydrogen evolution reaction/oxygen evolution reaction (HER/OER) in 0.5m H2SO4, 1.0m PBS, and 1.0m KOH, respectively. The small decline in performance after 300h of operation renders it one of the most effective catalysts for full-pH water splitting. DFT calculations indicate that oriented electron transfer (along the path from Ce to Co and then to Ir) creates an electron-rich environment for surface Ir clusters. The reconstructed interface electronic environment provides optimized intermediates adsorption/desorption energy at the Ir site (for HER) and at the Ir-Co site (for OER), thus simultaneously speeding up the HER/OER kinetics.

Bibliometric analysis of scientific publications on the websites of agricultural institutions of higher and additional education of the Russian Federation

The study of scientific activities of educational institutions of the agro-industrial complex is based on information from their websites and on scientometric indicators. Research work is reflected on all the studied websites and contains data on the topics of scientific research, the work of dissertation councils and data on patents and inventions. The electronic information environment is widely used, digital libraries are being developed, and links to digital library systems are provided. All higher educational institutions have scientific periodicals; the results of scientific research are presented in electronic form. Insufficient completeness of document archives, the spread of materials across the categories of the website, and limited availability of full-text databases are noted. An analysis of the publication activity of organizations was conducted on the basis of the Russian Science Citation Index (RSCI). According to the number of authors with publications in the RSCI, Russian Timiryazev State Agrarian University, Kuban State Agrarian University named after I.T. Trubilin and Vyatka State Agrotechnological University are distinguished with 3219, 300 and 1520 authors, respectively. Publications of employees of the Kuban State Agrarian University, Russian Timiryazev State Agrarian University, Omsk State Agrarian University named after P.A. Stolypin and Ryazan State Agrotechnological University named after P.A. Kostychev have a high citation rate in RSCI. When analysing the dynamics of the number of publications of educational institutions from 2019 to 2023, according to RSCI data, a general trend of increasing the number of scientific publications in agrarian universities was revealed.

Phosphorus‐Enhanced Bimetallic Single‐Atom Catalysts for Hydrogen Evolution

AbstractSingle‐atom catalysts (SACs), where individual metal atoms are anchored on support, hold great promise for electrocatalytic hydrogen evolution reactions (HERs). The inherent simplicity of the single‐atom center restricts opportunities for further enhancement. Binuclear SACs, incorporating two different metal sites, can further improve HER kinetics. However, the underlying mechanisms of the HER at the binuclear sites are complex and not fully understood, hampering the design of new efficient catalyst structures. Here, a comprehensive investigation is presented into phosphorus‐doped iron and cobalt bimetallic SACs supported on nitrogen‐doped graphitic carbon (P/FeCo‐NC), focusing on the potential mechanisms underpinning their enhanced HER activity. P/FeCo‐NC exhibits overpotentials of 38 and 95 mV at 10 mA cm2 in 0.5 m H2SO4 and 1 m KOH, respectively, nearing the acidic performance of commercial Pt/C (33 mV). Theoretical studies reveal that the phosphorus bridge significantly alters the electronic properties of the Fe active sites, while the adjacent Co atoms modulate the electronic environment, further optimizing the hydrogen adsorption‐free energy toward more favorable kinetics. This work highlights the structure‐activity relationships of bimetallic SACs and opens perspectives for future applications.

SPR Effect Enables Flexible Electronic Environment and Activity of Cd0.7In2.2S4-30 for High-Performance Pyro-PEC Catalytic Capability.

Plasma-semiconductor systems hold significant promise in the field of photoelectrocatalysis. In this study, the pyroelectric material cadmium indium sulfide (Cd0.7In2.2S4-30) and Pt were used as catalysts, and a temperature gradient was introduced to investigate the influence of surface plasmon resonance (SPR) effect on the pyroelectric and photocatalytic performance. Interestingly, under the influence of the SPR effect, Cd0.7In2.2S4-30 demonstrates a 1.6-fold and 1.4-fold increase in current density under photocatalytic and pyro-photoelectrocatalytic conditions at 1.23 V vs RHE, respectively. Furthermore, under the protection of surface metal Pt, a notable enhancement in the charge separation efficiency and stability of the photoelectrode material is observed. The combination of outstanding performance reveals that Pt noble metal ions, influenced by the SPR effect, generate a localized electric field at the adjacent semiconductor interface, enhancing the charge transfer capability between metal nanoparticles and the semiconductor, thereby promoting electron-hole separation and improving semiconductor photocatalytic activity. Additionally, the SPR effect increases the yield of high-energy pyro-electrons on plasma metal and facilitates their effective transfer to the semiconductor, thereby promoting the generation of thermally induced electrons. This study reveals the multifaceted of SPR effects on the behaviors of semiconductors and provides an opportunity to rationally design metal-semiconductor photocatalytic materials for efficient solar energy conversion.