Electron-donating Substituents Research Articles

Recent advances on anticancer and antimicrobial activities of directly-fluorinated five-membered heterocycles and their benzo-fused systems.

Due to the importance of the fluorinated heterocycles as main components of marketed drugs where 20% of the anticancer and antibiotic drugs contain fluorine atoms, this review describes the reported five-membered heterocycles and their benzo-fused systems having directly connected fluorine atom(s). The in vivo and in vitro anticancer and antimicrobial activities of these fluorinated heterocycles are well reported. Some fluorinated heterocycles were found to be lead structures for drug design developments where their activities were almost equal to or exceeded the potency of the reference drugs. In most cases, the fluorine-containing heterocycles showed promising safety index via their reduced cytotoxicity in non-cancerous cell lines. SAR study assigned that fluorinated heterocycles having various electron-donating or electron-withdrawing substituents significantly affected the anticancer and antimicrobial activities.

Effects of the nature of donor substituents on the photophysical and electroluminescence properties of derivatives of perfluorobiphenyl: donor–acceptor versus donor–acceptor–donor type AIEE/TADF emitters

The synthesis and properties of a group of organic electroactive compounds based on electron-deficient perfluorobiphenyl (PFBP) are described.

Insight into the Chemical Stability of N-Heterocyclic Ammonium Groups for Anion-Exchange Polyelectrolytes

The chemical stability of cationic groups, not only related to alkaline degradation but also to electrochemical degradation at high potentials, is the key factor that limits the durability of anion exchange membranes (AEMs) and anion exchange ionomers (AEIs) [1]. In recent years, quaternary ammonium (QA) groups represented by N-heterocyclic ammonium (NHA) groups display excellent ionic conductivity and superior alkaline stability, which makes NHA groups promising candidates to be applied in AEMs and AEIs [2]. However, electrochemical degradation of NHA groups has been neglected in previous research, even though the electrochemical oxidation of phenyl QAs was found in the ionomer at the oxygen evolution potentials [3]. In short, the mechanism by which effect of substituents affects the durability of NHAs cations, including alkaline stability and electrochemical stability, is unclear yet, and NHA groups must be attached to the polymer backbones by substituents to achieve their applications.In this work, the chemical stability of NHA is comprehensively studied. To investigate the relationship between alkaline durability and structure, we report a systematic study on the alkaline stability of 24 representative NHA groups at different hydration numbers (λ). The electronic effect of substituents on NHA groups and degradation mechanisms of NHA groups are systematically investigated by 1H nuclear magnetic resonance (1H NMR) and density functional theory (DFT) calculations, showing that the NHA groups with electron-donating substituents exhibit outstanding alkaline stability and linking NHA groups with the polymer backbone via γ-position could be a rational design for highly alkaline stable AEMs and AEIs. Furthermore, a constant voltage is applied to the QAs electrolyte solution to measure the electrochemical stability by simulating the real operating environment of and AEM water electrolyzers. Compared to structural changes before and after voltage application, NHA exhibits worse stability than alkyl QAs, involving the radical degradation and electrochemical degradation. These results above give us a clearer picture while designing the polymer used for electrochemical devices, which is that a careful balance needs to be established between alkaline and electrochemical durability, especially under the high potential and harsh alkaline environment.

Defluorinative Alkylboration of Alkenes Enabled by Dual Photoredox and Copper Catalysis.

A regioselectivity reversed three-component defluorinative alkylboration of alkenes with trifluoromethyls and bis(pinacolato)diboron via dual photoredox/copper catalysis is reported. The mild conditions are compatible with a wide array of nonactivated trifluoromethyl aromatics bearing electron-donating or electron-neutral substituents, trifluoroacetamides, and various nonactivated terminal and internal alkenes, enabling straightforward access to synthetically valuable γ-gem-difluoroalkyl boronates with high efficiency. Furthermore, this protocol is applicable to alkene-tethered trifluoromethyl aromatics to furnish gem-difluoromethylene-containing cyclic compounds. Synthetic applications and preliminary mechanistic studies are also presented.

Efficient copolymerization of ethylene with norbornene mediated by phosphine-sulfonate palladium catalysts

A series of tBu-/Ar-substituted phosphine-sulfonate palladium catalysts Pd1-Pd6 {[κ2(P, O)-(tBu)ArP(C6H4SO2O)]Pd(Me)(DMSO)} (1: Ar = Ph; 2: Ar = 4-OMe-C6H4; 3: Ar = 4-CF3-C6H4; 4: Ar = 2-OMe-C6H4; 5: Ar = 2,5- (OMe)2-C6H3; 6: Ar = 2,4-(OMe)2-C6H3) were prepared to copolymerize ethylene with norbornene and its polar derivatives. Installing electron-donating OMe substituent on the nonchelating P-bound aryl was proven to enhance the properties of catalysts. The position and number of OMe substituent significantly influenced the copolymerization results. The E-NB copolymers generated from these catalysts showed both high comonomer incorporations (≥19.3 mol%) and high copolymer molecular weights (≥24.6 kg⋅mol−1), which has been proven to be difficult to achieve using this catalyst system. And for the obtained copolymers, their norbornene incorporations and Tg values conformed to a linear relationship. More importantly, these catalysts can efficiently mediate the copolymerizations of ethylene and polar norbornenes, along with high activities (up to 1.0 × 106 g⋅mol−1⋅h−1), high molecular weights (up to 182 kg⋅mol−1), and high incorporations (up to 36.7 mol%). This work provided an efficient method to synthesis cyclic olefin copolymer using late transition metal catalysts.

Suzuki-Miyaura Cross-Coupling Reaction Using Palladium Catalysts Supported on Phosphine Periodic Mesoporous Organosilica.

Phosphine periodic mesoporous organosilicas (R-P-PMO-TMS: R=Ph, tBu), which possess electron-donating alkyl substituents on the phosphorus atom, were synthesized using bifunctional compounds with alkoxysilyl- and phosphino groups, bis[3-(triethoxysilyl)propyl]phenylphosphine borane (1 a) and bis[3-(triethoxysilyl)propyl]-tert-butylphosphine borane (1 b). Immobilization of Pd(0) species was performed to give R-P-Pd-PMO-TMS: R=Ph (2 a), tBu (3 a), respectively. The Pd(0) immobilized 2 a and 3 a were applicable as catalysts for Suzuki-Miyaura cross-coupling reactions of aryl chlorides with phenylboronic acid. It was revealed that 3 a bearing more electron-donating tBu groups exhibited higher catalytic activity. Various functional groups including both electron withdrawing and donating substituents were compatible in the system. The recyclability of 3 a was examined to support its moderate utility for the recycle use.

Regioselective modification at the 2,3- and 6-positions of chitosan with phenylcarbamates for chromatographic enantioseparation

Chitosan derivatives with two different phenylcarbamate pendants at the 6-position and 2,3-positions of the glucosamine unit were synthesized by triphenylmethyl as a protective group. The regioselective chitosan derivatives were prepared corresponding to coated-type chiral packed materials (CPMs), which were evaluated with thirteen chiral compounds by high-performance liquid chromatography (HPLC). The regioselective chitosan derivatives (4aⅠ/4aⅡ, 4bⅠ/4bⅡ) bearing electron-withdrawing 3,5‑chloro or 4‑chloro at the 6-position can recognize 7 or 8 of the 13 enantiomers and achieve baseline separation for enantiomers 5 and 7. They exhibited better chiral recognition abilities than the other derivatives with different substituents at the 6-position and the same 3,5-dimethylphenyl substituent at the 2,3-postion. In comparison to Chit-1 featuring a 3,5-dimethylphenyl substituent at the 2,3- and 6-positions, it was observed that the combination of both an electron-withdrawing and an electron-donating substituent of the regioselective chitosan derivatives (4aⅠ/4aⅡ, 4bⅠ/4bⅡ) showed better or similar enantioseparation abilities for racemic Compounds 7 and 6, respectively. The molecular weight-performance relationship of the regioselective chitosan derivatives was investigated in detail. It was found that with increasing molecular weight, the derivatives 4aⅡ and 4bⅡ all possessed greater enantioseparation power for 4 enantiomers, such as enantiomers 4, 7, 11, and 15, than the corresponding derivatives with low molecular weights. The molecular docking simulation results showed that excellent enantioseparation power significantly depended on the combination and interaction of multiple factors, such as steric hindrance, and polarity of the substituents on the CPMs and enantiomers.

Impact of alkyl chains, electron donor substituents and acidic group on aggregation-induced emission of carboxylic acid functionalized quinoxalines

We report an optical study of quinoxaline-based luminogens derived from 2,3-bis(aryl)-quinoxaline-6-carboxylic acid (1a, 1b, and 2) in solution and solid state. These compounds were fluorescent in solid films and in solutions with emission bands ranging from blue to green (445–517 nm). They showed a positive solvatochromism in the PL spectra, indicative of intramolecular charge transfer (ICT) in the excited state. 1a, 1b, and 2 exhibited Aggregation-Induced Enhanced Emission (AIEE) characteristics with a drastic change in properties by increasing alkyl chains and donor alkoxy groups. Their carboxylate potassium salts had a blueshift emission compared to the acid carboxylic form and a significant quenching in PL intensity in protic polar solvents. The salt of 1a presented an Aggregation-Induced Emission (AIE) profile, its weak fluorescence in water had an expressive enhancement by adding THF. Theoretical calculations were also carried out considering implicit solvent effects. The optimized structures of compounds and their simulated UV–vis absorption spectra showed no significant differences in water and acetonitrile. These results are in good agreement with the solvatochromism experiments. The calculated HOMO-LUMO energy gaps were 3.47 eV in both solvents, and the energy levels for HOMO and LUMO are slightly lower in water.

Hydroamination of alkynes catalyzed by NHC-Gold(I) complexes: the non-monotonic effect of substituted arylamines on the catalyst activity.

Imines are valuable key compounds for synthesizing several nitrogen-containing molecules used in biological and industrial fields. They have been obtained, as highly regioselective Markovnikov products, by reacting several alkynes with arylamines in the presence of three new N-Heterocyclic carbene gold(I) complexes (3b, 4b, and 6b) together with the known 1-2b and 7b gold complexes as well as silver complexes 1-2a. Gold(I) complexes were investigated by means of NMR, mass spectroscopy, elemental analysis, and X-ray crystallographic studies. Accurate screening of co-catalysts and solvents led to identifying the best reaction conditions and the most active catalyst (2b) in the model hydroamination of phenylacetylene with aniline. Complex 2b was then tested in the hydroamination of alkynes with a wide variety of arylamines yielding a lower percentage of product when arylamines with both electron-withdrawing and electron-donating substituents were involved. Computational studies on the rate-determining step of hydroamination were conducted to shed light on the significantly different yields observed when reacting arylamines with different substituents.

Synthesis of New Structural Analogues of Natural Integrastatins with a Basic Epoxybenzo[7,8]oxocine Skeleton: Combined Experimental and Computational Study

AbstractIn this work, the cyclization reactivity of various 3-acetyl-2-methylpyridines (including 3-acetyl-2-methylquinoline) containing both electron donor and acceptor substituents with salicylaldehyde into epoxybenzooxocino[4,3-b]pyridine derivatives was studied. The reactions were carried out in mild (under room temperature or reflux in 2-propanol) and harsh (in a sealed glass ampoule) conditions. It was shown that 3-acetyl-2-methylpyridines with an aryl substituent in the 4-position do not react with salicylaldehyde either under normal convection heating conditions or under more severe conditions. This effect was explained by the steric hindrance of the substituents using quantum chemical calculations. It was found that electron donor substituents in 3-acetyl-2-methylpyridines significantly facilitate cyclization in epoxybenzooxocino[4,3-b]pyridines. The presence of electron acceptor substituents (NO2 group for example) in the 5-position of pyridine prevents cyclization under normal conditions, but gives a rather high conversion to oxocinopyridines under more specific conditions. This effect is quantum-chemically explained by the decrease in the basicity of pyridine. Pyridines with two pairs of methyl groups in ortho-positions to the acetyl group are capable to form mixtures of regioisomeric epoxybenzooxocinopyridines. Further, epoxybenzooxocinopyridines with methyl and acetyl groups can form a mixture of diastereomeric bisoxocins under more specific conditions. All 17 initial pyridines were studied quantum-chemically in order to understand what features of their structure and properties affect the success of the cyclization reaction and the yield of the target product. The pyridine molecules were calculated by the DFT RB3LYP/6-311++G(d,p) method taking into account the alcohol solvent within the CPCM model using Gaussian-2016 program. It was shown that the absence of steric hindrances in the form of bulky substituents in 4-position of pyridines is the main factor affecting the success of the cyclization reaction. Also, the yield of the target product is affected by the CH-acidity of the methyl group in 2-position, which, in turn, is affected by electron-donating and electron-withdrawing substituents in the 5- and 6-positions.

Determining the Quintet Lifetimes in Side-ring Substituted [Fe(terpy)2]2+ Complexes

We previously studied the effect of 4' substitution in iron(II)-bis-terpyridine complexes, showing that the photoexcited high-spin quintet-state is stabilized by electron-donating substituents. In this paper we explore the effects of electron-donating ( X = NH2 , Cl ) and withdrawing ( X = NO2 ) substituents in the 5,5" positions on the stability and lifetime of the quintet-state. We used a simple densitiy-functional theory (DFT) based method that had been proven fairly accurate in the case of 4' substitution to estimate the energy barrier of the quintet-singlet transition and thereby predict the quintet state lifetime. We synthetized the complexes and used ultrafast transient optical absorption spectroscopy to experimentally determine the quintet lifetimes, in order to test the applicability of these quantum-chemistry based predictive methods for these side-ring substitution cases. UV-Visible spectra of the complexes have shown that the metal-to-li­gand charge transfer (MLCT) and ligand-localized transitions of these complexes change according to the previous observations. We have shown that in the 5,5" positions, electron withdrawing groups stabilize the quintet state, while donating groups destabilize it. This is in stark contrast to the effects previously observed for the 4' case, and indicates that unlike the latter case, the simple concept of inductive and mesomeric effects may not be adequate to describe the changes due to 5,5" substitution, warranting further study of the area.

Influence of bulky peripheral substituents on subphthalocyanine derivatives: Implications for photocatalytic and photoelectrochemical hydrogen production

A series of novel subphthalocyanine (SubPc) derivatives with bulky electron-donating substituents were synthesized for visible light-induced photocatalytic and photoelectrochemical hydrogen production. SubPc derivatives were decorated with bulky thiophenoxy (coded SubPc 1–2) and phenoxy (coded SubPc 3–4) substituents to compare the influence of the nature of the peripheral bulky substituents on the photophysical and photocatalytic activity of SubPc. The highest photocatalytic performance was obtained from SubPc 4, having diphenyl phenoxy substituents with an H2 production rate of 7.233 mmol g-1h−1. The photocatalytic hydrogen evolution activities of all SubPc sensitized TiO2 photocatalysts enhanced approximately four times in the presence of Pt co-catalyst. The photocatalysts showed remarkable long-term stability and reproducibility of H2 evolution over 24-hour irradiation. SubPc 4-based photocatalytic system reached a considerable catalytic activity with the H2 production of 16.022 mmol g−1 and a turnover number (TON) value of 34,089 for 24 h irradiation. Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) studies were carried out to better understand the photocatalytic abilities of SubPc derivatives and develop a symbiotic connection with experimental investigations. The results highlight the importance of peripheral substituents in modifying electron density, dipole moment, and HOMO-LUMO energy levels and improving SubPc derivative light-harvesting performance. The presence of 2,6-diisopropyl on SubPc derivatives (SubPc 2 and 4) caused a significant change in the properties, resulting in favourable electron transport characteristics and, therefore, improving photocatalytic performance. Furthermore, the incorporation of TiO2, as shown in SubPc 1@TiO2 and SubPc 2@TiO2, resulted in a modest reduction in chemical hardness, implying increased charge transfer inside the molecule and, as a consequence, enhancing its efficacy as a sensitizer. These theoretical discoveries provide a solid foundation for the customized design and optimization of SubPc derivatives for effective photocatalytic applications.

Dimensionality Engineering of Lead Organic Chalcogenide Semiconductors.

Two-dimensional (2D) metal organic chalcogenides (MOCs) such as silver phenylselenolate (AgSePh) have emerged as a new class of 2D materials due to their unique optical properties. However, these materials typically exhibit large band gaps, and their elemental and structural versatility remain significantly limited. In this work, we synthesize a new family of 2D lead organic chalcogenide (LOC) materials with excellent structural and dimensionality tunability by designing the bonding ability of the organic molecules and the stereochemical activity of the Pb lone pair. The introduction of electron-donating substituents on the benzenethiol ligands results in a series of LOCs that transition from 1D to 2D, featuring reduced band gaps (down to 1.7 eV), broadband emission, and strong electron-phonon coupling. We demonstrated a prototypical single crystal photodetector with 2D LOC that showed the dimensionality engineering on the transport property of LOC semiconductors. This study paves the way for further development of the synthesis and optical properties of novel organic-inorganic hybrid 2D materials.

Synthesis of palladium complexes containing benzimidazole core and their catalytic activities in direct C[sbnd]H functionalization of five-membered heterocyclic bioactive motifs

Herein, we reported the synthesis of nine new PEPPSI-Pd(II)–N-heterocyclic carbene (NHC) complexes 3a-h containing benzimidazole core and examined their catalytic activities in the direct arylation of heteroaromatic species with aryl bromides and arylchlorides. Nine new Pd benzimidazole complexes were synthesized and their structures were elucidated by 1H and 13C NMR spectroscopy, FT-IR spectroscopy, and elemental analysis methods. In the 13C NMR spectra, NCHN peaks of Pd(II) complexes were observed between 159.7–161.5 ppm. Further, direct arylation reaction, using KOAc as base and DMAc as solvent under inert conditions, were carried out with the synthesized complexes in the presence of various aryl bromides and chlorides, and 2-acetyl furan, and furfuryl acetate 2-acetylthiophene and N-methylpyrrole-2- carboxaldehyde. Moreover, moderate to hig yields were obtained in the direct arylation of heteroarenes and aryl bromides under 1 mol% catalyst loading at 150 °C for 2 h loading conditions. The results showed that electron-donating and electron-withdrawing substituents on the aryl halides might produce coupling products in good yields in the presence of complexes 2a-d. Taken together, our findings are expected to contribute to the synthesis and design of palladium complexes containing benzimidazole core structures.

Tuning the Nucleophilicity and Electrophilicity of Group 10 Elements through Substituent Effects: A DFT Study.

In this study, a series of electron donor (-NH2, -NMe2 and -tBu) and electron-withdrawing substituents (-F, -CN and -NO2) were used to tune the nucleophilicity or electrophilicity of a series of square planar Ni2+, Pd2+ and Pt2+ malonate coordination complexes towards a pentafluoroiodobenzene and a pyridine molecule. In addition, Bader's theory of atoms in molecules (AIM), noncovalent interaction plot (NCIplot), molecular electrostatic potential (MEP) surface and natural bond orbital (NBO) analyses at the PBE0-D3/def2-TZVP level of theory were carried out to characterize and discriminate the role of the metal atom in the noncovalent complexes studied herein. We hope that the results reported herein may serve to expand the current knowledge regarding these metals in the fields of crystal engineering and supramolecular chemistry.

Electrochemical characterization of redox activity and stability of various tris(2,2‘-bipyridine) derived complexes of iron(II) in aqueous solutions

Tris(2,2'-bipyridine) Fe(II) complexes with different 4,4'-placed substituents were studied electrochemically in aqueous solutions. Digital simulation of the experimental cyclic voltammograms enabled the evaluation of the redox potentials, electrochemical kinetics as well as complex stability. The substituent effect on the formal potential of the complexes was investigated, showing that electron-withdrawing substituents shift the formal potential to a positive direction from the potential of the unsubstituted [Fe(II)(bpy)3]2+ complex (0.875 V vs. Ag/AgCl). Respectively electron-donating substituents shift the formal potential to a negative direction. The most positive formal potential (0.97 V vs. Ag/AgCl) was obtained with 4,4'-dicarboxyl substituted and the lowest 0.56 V vs. Ag/AgCl with 4,4'-di-OMe substituted [Fe(II)(bpy)3]2+. We show here that the stability of the compounds in the oxidized form can be evaluated by voltammetry. None of the studied complexes was stable enough for flow battery applications, but knowledge of their decomposition rates was obtained via simulations, considering that all oxidized species undergo a chemical reaction, resulting in a loss of redox-active species. The counterion of the complex affected the solubility and stability of the complex, as the presence of tetrafluoroborate resulted in faster decomposition than the presence of sulfate. Battery testing of the most stable Fe(II) complex revealed a voltage drop upon discharge, lowering the energy efficiency. Battery cycling showed a capacity decay most likely related to the chemical reaction occurring to the oxidized species. Even though the studied complexes are not suitable for aqueous flow battery applications as such, knowledge of a substituent, counterion, and electrolyte effect on their performance is needed to develop these complexes further and to improve their stability via structural design. We show here that voltammetry is a suitable tool for fast initial evaluation of the stability of the materials.

New Insights into Selective Singlet Oxygen Production via the Typical Electroactivation of Oxygen for Water Decontamination.

Selective production of singlet oxygen (1O2) as an electrophilic oxidant is crucial for the precise control of chemical targets in environmental fields. Herein, we proposed a strategy to construct a redox interface on electrodes, which can in situ produce inorganic metal hydroperoxides with appropriate oxidative ability during oxygen activation. Benefiting from atomic Cu sites (CuN4) in a copper-carbon aerogel electrode, almost complete production of 1O2 was achieved, thereby refraining the competitive formation of other reactive oxygen species. The fast electron transfer rate between CuN4 and electrogenerated H2O2 promoted the in situ formation of copper hydroperoxide (N4-Cu-OOH), thereby selectively and efficiently oxidizing intermediate O2•- to 1O2. The optimized production of 1O2 was up to 2583 μmol L-1 without additional chemical reagents. We further considered the high production of 1O2 for efficiently removing electron-rich organic pollutants from a complex water matrix. Fast kinetics was achieved and considered for removing various pollutants with electron-donating substituents in a nonradical oxidation pathway. The BPA degradation efficiency is less susceptible to the coexisting natural organic matter (NOM) and inorganic ions. Specifically, the kinetic constant for BPA removal is 34 times higher than that for a nanoparticle of a copper-carbon electrode while producing a hydroxyl radical. Our findings highlight the innovative interfacial surface engineering of an electrocatalytic O2 activation system to selectively generate 1O2 for future potential applications.

Cobalt-Catalyzed Bis-Borylation of Quinolines: The Importance of the Cobalt Triplet State.

We report herein a mild stereo- and regioselective dearomatization of quinolines using the simple low valent HCo(N2 )(PPh3 )3 complex that exhibits labile ligands. Conditions to form selectively, at room temperature, high-valued 1,4-bis-borylated tetrahydroquinolines from simple starting heteroaromatic compounds have been developed. The efficient and selective functionalization of a large scope of quinolines bearing various electron-donating or electron-withdrawing substituents is presented, as well as the post-modification of the resulting C-B bond. NMR and labelling studies are consistent with a cascade mechanism pathway, starting from an in situ generated paramagnetic bis-quinoline cobalt(I) hydride complex. A first quinoline dearomatization followed by a cobalt(I)-catalyzed Markovnikov hydroboration of the remaining double bond allows the introduction of the boronic ester group only at C4 position. DFT calculations particularly highlight the importance of the cobalt triplet state throughout the reaction pathway, and bring some rationalization for the observed C4 selective borylation.

Computationally design aspects of superbasic amidine-arsinine 1-oxide binary frameworks

Novel Brønsted superbases (1–10) were designed on the basis of arsinine 1-oxide core by changing the species of proton absorption site, type and situation of electron-donating substituents in the gas phase and CH3CN medium. The conjugate acids of the designed structures are stabilized through positive charge distribution and/or formation of an intramolecular hydrogen bond. To explore the various structural aspects of the designed molecules for reaching the higher basicity values in gas phase and solution phase in CH3CN solvent, proton affinity (PA), gas phase basicity (GB), pKa, and Nucleus-IndependentChemicalShifts 1 Å above the arsinine 1-oxide ring center along with zz axis (NICS(1)zz) parameters as well as natural bond orbital (NBO) charges calculated and obtained for each structure. The basicity strength of proposed structures was evaluated using B3LYP/6–311 + G(d,p) level of theory. The protonation of all designed structures was studied from both possible sites in gas and CH3CN phase and PA, GB, pKa, and NICS(1)zz values were calculated for each case. It was found that most designed compounds demonstrate superbasicity characteristics and especially amidine-arsinine 1-oxide core structure including two phosphazene electron donating groups (10) shows highest superbasicity properties. The most important finding of the study was the considerable synergistic effect between amidine and arsinine 1-oxide moieties for creating remarkable basicity strength. Aromaticity alterations of the arsinine 1-oxide ring also was monitored during protonation process.

Photoinitiated Rearrangement of Aromatic Azides to 2-Aminonicotinates.

This study describes a one-pot photoinduced method for azepine synthesis and their subsequent rearrangement into pyridines. The rearrangement of the azepine, formed during photolysis, occurs due to both thermal and photochemical activation of the reaction. This requires an electron-donating substituent at the second position of the azepine and an electron-withdrawing substituent at the third position of the azepine. A reaction mechanism has been proposed to explain the role of water and the nature of the azepine substituents.