Electromagnetic Waves Research Articles

Damage evolution, acoustic emission and electromagnetic radiation of rock under uniaxial cyclic loading

Uniaxial cyclic loading compression experiments are conducted with synchronous monitoring of acoustic emission (AE) and electromagnetic radiation (EMR). The AE and EMR characteristics of rocks during cyclic loading are analyzed. Subsequently, the Kaiser and Felicity effects of AE and EMR are disclosed. Moreover, the b-value and fractal dimension are calculated to explore the cracking mechanism of rock materials. These results show that the AE and EMR are active during the 1st and 2nd loading cycles, and sparse during the 3rd and 4th loading cycles where the AE and EMR are only generated when the stress exceeds the previous peak stress due to the Kaiser effect. In the 5th loading cycle, AE and EMR accelerate and peak at rock failure. The variation of EMR-based FR is consistent with that for AE under cyclic loading. Hence, the FR associated with EMR is also well correlated with stress memory. The AE and EMR-based FR is greater than 1 in the 2nd-4th loading cycles, and less than 1 in the 5th cycle, indicating that FR can be used to reflect the damage evolution of rocks. The b-value and fractal dimension increase in the 1st-4th loading cycles, and turn to decrease in the 5th loading cycle. This pattern serves as a precursor to identify the rock failure.

Preparation and research of high electromagnetic wave transmission type concrete in 5G frequency band

In urban areas with many buildings, the transmission of 5G signals can be greatly absorbed or reflected, leading to decreased effectiveness of transmission. To address the issues mentioned above, the functional admixture formed by the mixture of nanocrystalline cellulose (NCC) and diammonium hydrogen phosphate (DAP) is added into concrete in this study, the electromagnetic transmission performance (ETP) and mechanical properties of concrete are enhanced simultaneously for the first time, and the electromagnetic transmission coefficient of concrete is doubled. When NCC and DAP are mixed, the electromagnetic transmission coefficient of concrete improved by 117.65%-124.35%, among which, when 0.5wt% DAP and 4wt% NCC are mixed, the electromagnetic transmission coefficient of concrete is the highest, and some frequency bands are as high as 70%, meeting the requirements of electromagnetic wave transmitting materials. In addition, the compressive strength of concrete containing 4wt% NCC and 0.5wt% DAP increases by 24.3% compared to concrete containing only 4wt% NCC.

Numerical study of mid-infrared broadband perfect absorber based on dielectric/aluminium doped zinc oxide multilayer films

We propose a lithography-free wide-angle polarization-insensitive ultra-broadband absorber by using multilayer films consist of five pairs of aluminium doped zinc oxide (AZO) and a dielectric film which is supposed to be fabricated on glass substrate. The absorption spectrum of the proposed model is calculated by using transfer matrix method.The analytic results show that the absorptivity is larger than 95% with normal incidence light in the wavelength range from 7.5μm to 20μm and having high transmittance at the visible wavelength range from 0.4μm to 0.8μm range. Further, the effect of incident angle and polarization on the absorption spectrum are also investigated. The absorption spectrum of the proposed design is highly tunable on changing the damping constant of the AZO film. The electric field and magnetic distributions at different wavelengths show that the absorption is mainly originated due to the constructive interference of electromagnetic waves in the multilayer films. Such physical mechanism of broadening bandwidth based on increasing the carrier concentration of the highly visible transparent conducting films have pave a new direction for the design of tunable broadband absorber in different frequency band. Meanwhile, this broadband absorber is a good candidate for the potential applications in daytime radiation cooling system in the mid-infrared frequency band and also used as transparent conducting electrode in solar cell applications.

Frequency shifting of plasmon polariton defect modes in a non-Hermitian finite heterostructure

A finite photonic layered system alternating usual media with a dispersive metamaterial with two central layers in a PT- symmetric arrangement is investigated under the oblique incidence of an electromagnetic wave. We have found a defect mode within the gap, and we have studied its optical properties under the influence of gain and loss distributed in these central layers. As a consequence of PT-symmetry in the system, we find that exceptional points can be attracted to or repelled from each other depending on which side of the frequency band under study. Below the plasmon frequency, repulsion occurs between pairs of exceptional points, while above it they attract each other.

Stand-off concealed firearm detection using motion tracking and convolutional neural networks

<p>The standoff detection of concealed firearms is crutial in managing public security in public spaces. Currently employed standoff concealed weapon detection techniques employ electromagnetic wave imaging which has been found to be extremely slow and may require expensive hardware and may not be applicable in public open spaces. Inorder to maintain safety in open spaces, artificial intelligence enabled video surveillance systems have been widely adopted. This poses an opportunity to explore video surveillance cameras as concealed weapon detectors. A review of existing video surveillance based automated weapon detection approaches discovered that the focus was on the detection of unconcealed firearms leaving a gap in the detection of concealed firearms. This study addresses the aforementioned gap by providing a standoff concealed firearm detection approach on video based on skeletal-based human motion tracking and convolutional neural networks. The motion of armed and unarmed persons was tracked using a depth camera and further classified using convolutional neural networks model. The developed model reported 100% accuracy, precision and recall scores. These results outperformed results obtained from traditional machine learning models therefore highlighting the superior capability of the proposed approach for concealed firearm detection on video to complement the efforts of human video surveillance operators.</p>

Novel flexible magnetoelastic biosensor based on PDMS/FeSiB/QD composite film for the detection of African swine fever virus P72 protein.

African swine fever (ASF) is a highly contagious and severe hemorrhagic disease caused by the African swine fever virus (ASFV). The continuous spread of ASFV affects the safety of the global meat supply; therefore, the establishment of sensitive and specific detection methods for ASFV has become an important hot spot in food safety. Herein, we developed a flexible magnetoelastic (ME) biosensor based on PDMS/FeSiB/QDs composite films for the detection of ASFV P72 protein. Based on the high luminescence performance of CsPbBr3 quantum dots and the excellent magnetoelastic effect of FeSiB, flexible ME biosensors convert stress signals generated by antibody-antigen-specific binding into optical and electromagnetic signals. The nanostructures covalently linked by quantum dots and PDMS provide biomodification sites for ASFV P72 antibodies, simplifying the functionalization modification process compared to the case of conventional biosensors. The deformation of the PDMS film is amplified, and the conversion of surface stress signals to electrical signals is enhanced by exposing the biosensor to a uniform magnetic field. The experimental results proved that the flexible ME biosensor has a wide linear range of 10 ng mL-1-100 μg mL-1, and the detection limit is as low as 0.079 ng mL-1. Moreover, the flexible ME biosensor also shows good stability, sensitivity and specificity, confirming the potential for early disease screening.

Activating Excellent Electromagnetic Wave Absorption of Micromorphology-Optimized Cu/C Nanocomposite Fibers via a Metal-Organic Framework Template-Assisted Strategy.

Morphological engineering is crucial for conceiving high-efficiency electromagnetic wave (EMW) absorption materials. However, for carbon fiber-based composites, the management of micromorphology is significantly astricted by complex fabrication. It remains highly challenging to clarify the micromorphological influences on the EMW loss mechanism of carbon fiber-based absorption materials. In this work, micromorphology-optimized Cu/C nanocomposite fibers are prepared by virtue of a metal-organic framework (MOF) template-assisted strategy. Through skillfully grafting the morphology-regulation capacity of MOFs onto composite fibers, the Oswald maturation and particle distribution issues of Cu nanoparticles are settled, and the efficient electron transport pathways are established by the bead-like structure of the fiber matrix. Compared to prepared conventional Cu/C nanocomposite fibers, the MOF template-assisted strategy stimulates a remarkable leap in EMW absorption performance. The minimum reflection loss value of Cu/C-40 can reach -64.5 dB, 15.96 times lower than that of a conventional sample (Cu/C-2). The maximum effective absorption bandwidth extends to 6.08 GHz, contrasting the ineffective performance of Cu/C-2. Systematic research demonstrates that the enabled graphite-catalytic function of Cu nanoparticles collaborated with an optimized conductive network structure plays a pivotal role in creating field-induced leakage currents, facilitating conductive loss, the primary contributor to EMW dissipation. This work establishes a correlation mechanism between micromorphology and EMW loss, presenting a compelling example of customizable carbon fiber-based absorbers.

Novel fire-resistant SiBCN fiber paper with efficient electromagnetic interference shielding and Joule-heating performance

Since electromagnetic interference (EMI), icing, and fire incidents greatly threaten aviation safety, multifunctional EMI shielding materials are urgently required in the aviation industry. However, developing highly efficient EMI shielding materials that combine fire resistance and thermal management remains a significant challenge. Here, a novel fire-resistant SiBCN ceramic fiber paper with excellent EMI shielding and Joule heating performance was fabricated via electrospinning followed by cross-linking, pyrolysis, and annealing. Compared with the SiBCN fiber paper prepared at 800 °C with poor EMI shielding performance, the total shielding effectiveness (SET) of the SiBCN fiber paper annealed at 1400 °C significantly increased to 21 dB, with specific shielding effectiveness (SSE/t) as high as 3317 dB•cm2•g−1, due to the precipitation of “island-like” conductive turbostratic C, facilitating the synergistic effects of conduction loss, dipole polarization, and interfacial polarization, resulting in high efficiently attenuation of the electromagnetic waves (EMW). Furthermore, the fiber paper demonstrated excellent fire-resistant and Joule-heating performance, with a rapid electrothermal conversion response and a high saturation temperature of 300 °C at 12 V. Therefore, this work proposes a novel strategy for designing multifunctional ceramic fiber paper with integrated EMI shielding, fire resistance, and Joule heating performance for aircraft safety.

RGO aerogel embedded with organic–inorganic hybrid perovskite for lightweight broadband electromagnetic wave absorption

rGO aerogel embedded with organic–inorganic hybrid perovskite for lightweight broadband electromagnetic wave absorption

Resonant switching current detector based on underdamped Josephson junctions

Current-biased Josephson junctions can act as detectors of electromagnetic radiation. At optimal conditions, their sensitivity is limited by fluctuations causing stochastic switching from the superconducting to the resistive state. This work provides a quantitative description of a stochastic switching current detector, based on an underdamped Josephson junction. It is shown that activation of a Josephson plasma resonance can greatly enhance the detector responsivity in proportion to the quality factor of the junction. The ways of tuning the detector for achieving optimal operation are discussed. For realistic parameters of Nb/AlOx/Nb tunnel junctions, the sensitivity and noise-equivalent power (NEP) can reach values of S≃5×1012 (V/W) and NEP≃2×10−23 (WHz−1/2), respectively. These outstanding characteristics facilitate both bolometric and single-photon detection in microwave and terahertz ranges. Published by the American Physical Society 2024

Photosensitized Oxidation of Free and Peptide Tryptophan to N-Formylkynurenine.

The oxidation of proteins and, in particular, of tryptophan (Trp) residues leads to chemical modifications that can affect the structure and function. The oxidative damage to proteins in photochemical processes is relevant in the skin and eyes and is related to a series of pathologies triggered by exposure to electromagnetic radiation. In this work, we studied the photosensitized formation of N-formylkynurenine (NFKyn) from Trp in different reaction systems. We used two substrates: free Trp and a peptide of nine amino acid residues, with Trp being the only oxidizable residue. Two different photosensitizers were employed: Rose Bengal (RB) and pterin (Ptr). The former is a typical type II photosensitizer [acts by producing singlet oxygen (1O2)]. Ptr is the parent compound of oxidized or aromatic pterins, natural photosensitizers that accumulate in human skin under certain pathological conditions and act mainly through type I mechanisms (generation of radicals). Experimental data were collected in steady photolysis, and the irradiated solutions were analyzed by chromatography (HPLC). Results indicate that the reaction of Trp with 1O2 initiates the process leading to NFKyn, but different competitive pathways take place depending on the photosensitizer and the substrate. In Ptr-photosensitization, a type I mechanism is involved in secondary reactions accelerating the formation of NFKyn when free Trp is the substrate.

Theory of Refraction, Ray–Wave Tilt, Hidden Momentum, and Apparent Topological Phases in Isotropy-Broken Materials Based on Electromagnetism of Moving Media

The mysterious nature of electromagnetic momentum in materials is considered one of the most significant challenges in physics, surpassing even Hilbert’s mathematical problems. In this paper, we demonstrate that the difference between the Minkowski and Abraham momenta, which consists of Roentgen and Shockley hidden momenta, is directly related to the phenomenon of refraction and the tilt of rays from the wavefront propagation direction. We show that individual electromagnetic waves with non-unit indices of refraction (n) appear as quasistatic high-k waves to an observer in the proper frames of the waves. When Lorentz transformed into the material rest frames, these high-k waves are Fresnel–Fizeau dragged from rest to their phase velocities, acquiring longitudinal hidden momentum and related refractive properties. On a material level, all electromagnetic waves belong to Fresnel wave surfaces, which are topologically classified according to hyperbolic phases by Durach and determined by the electromagnetic material parameters. For moving observers, material parameters appear modified, leading to alterations in Fresnel wave surfaces and even the topological classes of the materials may appear differently in moving frames. We discuss the phenomenon of electromagnetic momentum tilt, defined as the non-zero angle between Abraham and Minkowski momenta or, equivalently, between the rays and the wavefront propagation direction. This momentum tilt is only possible in isotropy-broken media, where the E and H fields can be longitudinally polarized in the presence of electric and magnetic bound charge waves. The momentum tilt can be understood as a differential aberration of rays and waves when observed in the material rest frame.

Preparation of coal gangue foam concrete modified by nanomaterials: Physical properties, pore structure, and electromagnetic properties

In this study, coal gangue foam concrete (CGFC) was modified with nanomaterials to optimize its electromagnetic wave (EWV) absorption performance. Single-factor test was carried out to explore the effects of nano-silica (NS) and nano-calcium carbonate (NC) on the physical characteristics, hydration products and microstructure of CGFC. The results showed that the compressive strength of CGFC was the optimal when NS and NC were mixed with 1.5 wt% each, in which case the volume water absorption also decreased to the lowest value of 20.61 %. Additionally, compared with the control group, the incorporation of NS significantly accelerated the cement hydration rate. Moreover, the synergistic effect after the addition of NC promoted the cement hydration to generate more ettringite and C-S-H gel, and partly reduced the average pore size of CGFC, thereby improving the pore structure. Finally, the attenuation constant of the composite material can reach 187.92, and the reflection loss can reach −35.6 dB, demonstrating its excellent electromagnetic wave absorption ability.

A novel oxide ceramic matrix composite with integrated high-temperature EMW absorption and mechanical performance

Oxide ceramic matrix composites (OCMC) are extensively used as thermal structural materials due to good high-temperature resistance, mechanical properties, and oxidation resistance, but they are rarely regarded as electromagnetic wave absorbing materials due to the high resistivity of oxide ceramics/fibers. However, high-performance Al2O3 fiber can be used to design and fabricate OCMC with integrated high-temperature microwave absorbing and mechanical properties by introducing dielectric material into Si-based ceramic matrix. The N610/Si3N4-SiOC composites have the prior mechanical performance because the uniformly distributed Si3N4 matrix made the fiber bear effectively. After that, the Sc2O3 modified SiOC matrix was filled into inter- and intra-fascicular pores forming interfacial polarization, dipole polarization, multiple reflection and scattering to attenuate the incident electromagnetic wave (EMW). The effective absorption bandwidth (EAB) and the minimum reflection coefficient (RCmin) of N610/Si3N4-SiOC(Sc) composites at the thickness of 2.75 mm reach 3.0 GHz and −42 dB in the X band, respectively. In addition, the EMW absorption performance of the composite is relatively stable with EABmax and RCmin of 3.5 GHz and −41 dB in 4–18 GHz at high temperatures. This work provides a strategy for designing and fabricating OCMC with excellent mechanical properties and EMW absorption properties.

Synergizing Electron and Ion Transports of Ti3C2TX MXene Fiber via Dot‐Sheet Heterostructure and Covalent Ti─C─Ti Cross‐Linking for Efficient Charge Storage and Thermal Management

AbstractTi3C2TX MXene with the merits of metallic conductivity, superhigh volumetric capacitance, and efficient absorption of the electromagnetic wave is considered a promising building block for fiber fabrication; nevertheless, the simultaneous improvement in electrochemical charge storage and electrical conductivity/thermal management is seldom achieved for MXene‐based fibers due to the contradictory in material design. Typically, aligned and densified packing of MXene fibers is highly desired for an enhanced intra‐/inter‐flake electron transport; however, the narrowed inter‐layer spacing restricts the kinetics of ion diffusion (the intercalation/de‐intercalation of electrolyte ions) and diminishes the accessible active sites for charge storage. Herein, the electron and ion transports of Ti3C2TX MXene fiber are synergized via a unique dot‐sheet heterostructure covalently bonded by Ti─C─Ti which provides the optimal inter‐layer spacing for rapid ion diffusion and enhances the intra‐/inter‐flake cross‐linking for fast electron transport. As a result, the obtained fiber offers an improved conductivity of 2405 S cm−1, a desirable capacitance of 1597 F cm−3, an impressive energy density of 19.8 mWh cm−3 for the assembled supercapacitor, superior Joule heating performance, and a photo‐thermal temperature. These remarkable attributes enable their practical applications in energy‐supply scenarios, such as powering LEDs and wearable thermal management.

Multi-component attached carbon matrix composites with superior electromagnetic wave absorption performance and multifunctional applications

The preparation of highly absorbing and high-performance electromagnetic wave-absorbing materials remains a significant challenge. In this paper, carbon matrix composites modified with sodium inorganic salts (CMS) have been successfully prepared by using the solvent evaporation method in combination with the hydrothermal treatment and high temperature carbonization processes. The composition of the product can be manipulated by varying the material ratios, which in turn affects the interface and dielectric properties of the material. Sodium carbonate (Na2CO3) was produced as a transition phase between sodium silicate and carbon matrix due to high temperature. According to differential charge density a significant charge accumulation found between the interfacial of Na2CO3 and carbon layer is helpful to polarization. The synergistic effect of polarization and conduction loss due to the formation of multiple heterogeneous interfaces and carbon matrix results in excellent electromagnetic wave absorption performance. The minimum reflection loss (RLmin) is −55.49 dB when the thickness is 3.1 mm. Furthermore, CMS composites exhibit notable flame retardancy and thermal insulation properties, rendering them suitable for a diverse range of applications. These remarkable achievements provide new ideas for the design and development of efficient electromagnetic wave absorption materials.

Enhancement of Electromagnetic Wave Attenuation through Polarization Loss Induced by Hybridization of Rare‐Earth 4f and Mo‐4d Orbitals in Liquid Plasma

AbstractThe incorporation of large‐sized rare earth (RE) elements with high coordination characteristics into transition metal dichalcogenide (TMD) absorbers while preserving a high 1T phase content during post‐processing poses a significant challenge. To address this, a novel strategy involving the confinement of RE elements within the 1T‐MoS2 lattice via liquid plasma assistance, is proposed. This approach effectively mitigates the environmental impact on the 1T phase of MoS2, yielding a remarkable 1T phase content of 82.69% for Ce20‐D7 (20 wt.% Cerium trinitrate and 7 kV applied voltage). Combining experimental and theoretical investigations reveals that the multi‐orbital characteristics of RE elements facilitate hybridization between the RE‐4f and Mo‐4d orbitals on the MoS2 surface, leading to the occupation of weakly bound electrons in bonding orbitals with short‐distance motion, enhanced inter‐orbital electron‐electron interactions, and induced polarization loss. Notably, the results demonstrate that the Pr15‐D7 sample (15 wt.% praseodymium nitrate and 7 kV applied voltage) exhibits an effective absorption bandwidth (EAB) of 7.12 GHz at 2.6 mm, with a minimum reflection loss of ‐52.02 dB while the Ce20‐D7 sample achieves an EAB of 6.96 GHz at 2.7 mm. These findings provide valuable insights for the rational design and development of high‐performance TMD absorbers leveraging RE‐modified materials.

Long‐Infrared Broadband Polarization‐Sensitive Absorber with Metasurface Based on Ladder Network

AbstractPlasmonic resonant and metamaterial structures allow for manipulating the polarization properties of electromagnetic waves to achieve polarization beam splitting. Broadband polarization‐sensitive metamaterial absorbers based on surface plasmon polaritons have the advantages of high‐energy utilization and excellent stability, which may replace traditional polarizing devices. Here, an absorber based on a ladder network construction is designed theoretically and investigated experimentally. The absorber can possess almost 92% average absorptivity for TM polarization light in 8–12 µm range (experimental result: 83% from 7 to 11 µm). It is especially sensitive to the polarization angle of incident light, and with the increase of polarization angle, the broadband absorption response can present analogously monotonous reduction. The theoretical and experimental results for TE polarization light are 12% and 25%, respectively. The broadband absorption response performs angle insensitive property under oblique incidence. The proposed metamaterial absorber opens a path to realize broadband polarization‐sensitive absorption based on simple nanostructure. It will possess great potential applications in high‐performance polarimetric photodetectors and imaging fields.

Safety evaluation of electromagnetic exposure for compact wireless charging stations of electric vehicles

ABSTRACT The spatial electromagnetic field of electric vehicle (EV) wireless charging stations may experience a superposition effect, which will increase the electromagnetic radiation. To assess the safety of electromagnetic exposure from wireless charging stations, this study employs a finite element simulation software to construct an electromagnetic environment model for a compact wireless charging station. The model is utilized to compute the superposition effect of spatial electromagnetic fields resulting from the simultaneous charging of multiple wireless chargers. Furthermore, the model assesses the levels of electromagnetic exposure on human models at eight observation points situated within the charging station. Results indicate that the volume average values of spatial magnetic induction strength ( B ) and electric field strength ( E ) are higher when multiple EVs are charged simultaneously than when a single EV is charged, and the electromagnetic radiation received by a human standing between two vehicles is greater than that near one vehicle. At the 22 kW charging power level, the maximum values of B , E and current density at the eight observation points of the charging station are all below the International Commission on Non-Ionizing Radiation Protection limit, demonstrating that the human body is safe in compact wireless charging stations at this power level.

A real-time working memory evaluation system for macaques in microwave fields.

With the development and widespread application of electromagnetic technology, the health hazards of electromagnetic radiation have attracted much attention and concern. The effect of electromagnetic radiation on the nervous system, especially on learning, memory, and cognitive functions, is an important research topic in the field of electromagnetic biological effects. Most previous studies were conducted with rodents, which are relatively mature. As research has progressed, studies using non-human primates as experimental subjects have been carried out. Compared to rodents, non-human primates such as macaques not only have brain structures more similar to those of humans but also exhibit learning and memory processes that are similar. In this paper, we present a behavioral test system for the real-time evaluation of the working memory (WM) of macaques in a microwave environment. The system consists of two parts: hardware and software. The hardware consists of four modules: the operation terminal, the control terminal, the optical signal transmission, and detection module and the reward feedback module. The software program can implement the feeding learning task, the button-pressing learning task, and the delayed match-to-sample task. The device is useful for the real-time evaluation of the WM of macaques in microwave environments, showing good electromagnetic compatibility, a simple and reliable structure, and easy operation.