Electrochemiluminescence Behavior Research Articles

Optically Pure Co(III) Complex Absorbed by Electrochemiluminescence-Active Covalent Organic Framework as an Enantioselective Recognition Platform to Give Opposite Responses Toward Amino Alcohol Enantiomers.

Although covalent organic frameworks (COFs) accompanied by electrochemiluminescence (ECL) behavior have been introduced in recent years, they are still rarely applied for ECL-based enantioselective sensing, especially giving high recognition efficiency. In the current study, an achiral ionic COF comprised of the pyridinium unit is synthesized in the linkage of the carbon-nitrogen cation bond through the Zincke reaction. Interestingly, the synthesized ionic COF can generate clear ECL owing to the presence of electroactive species. Then, the ECL-active achiral COF is employed to absorb the chiral Co(III) complex for enantioselective sensing. As a result, the developed ECL sensor displays discriminative responses toward amino alcohol enantiomers. When the chiral Co(III) complex with (R)-configuration is used, the examined (S)-amino alcohols result in ECL enhancement, whereas (R)-amino alcohols lead to ECL quenching. The maximum ECL intensity ratio between (S)- and (R)-amino alcohols is up to 47.7. In addition, the recognition mechanism is investigated in detail. Finally, a good linear relation between enantiomeric composition and ECL intensity is developed and appropriate for the accurate analysis of the enantiomeric purities of unknown samples. In short, we believe that this study constructs an effective strategy to combine the respective advantages of COFs and ECL for high-efficiency enantioselective sensing.

Ionic Covalent-Organic Frameworks Composed of Anthryl-Extended Viologen as a Kind of Electrochemiluminescence Luminophore.

Nowadays, covalent-organic frameworks (COFs) integrated with the electrochemiluminescence (ECL) behavior are highly desired owing to the significant advantages including multifunctionality, high sensitivity, and low background noise. Here, two ionic COFs (iCOFs) consisting of the anthryl-extended viologen as the backbone were designed and synthesized via the Zincke reaction. It is found for the first time that the as-prepared iCOFs accompanied by potassium persulfate as the coreactant can provide a clear ECL response in a water-bearing medium. The maximum ECL emissions of the iCOFs were in agreement with the photoluminescence spectra. Besides, cyclic voltammetry and electron paramagnetic resonance measurements reveal that the pyridinium unit was electrochemically reduced to afford the free radical. Then, it reacted with SO4·- to generate the excited-state [iCOF]*. Finally, [iCOF]* quickly returned to its ground state coupled with a clear ECL emission, yielding a maximum ECL quantum efficiency of 23.4% compared with tris(2,2'-bipyridyl) ruthenium(II) as the benchmark. In brief, the current study opens a way to develop a kind of ECL emitter that holds great potential in sensing, imaging, and light-emitting devices.

Selective detection of ketamine in human urine samples by electrochemiluminescence sensor based on conductive molecular imprinted polypyrrole: A hydrogen peroxide‐free electrochemiluminescence assay

AbstractA new sensor was fabricated for the determination of ketamine (Ket) in urine samples based on enhanced electrochemiluminescence (EECL) behavior of luminol on a carbon paste electrode (CPE) modified with the conductive molecularly imprinted polymer (CMIP) film. The FESEM technique was applied to demonstrate the rod shape morphology of CMIP. Unlike the common luminol system, EECL signal of luminol no need to addition of hydrogen peroxide and it might find application in efforts to avoid instability of hydrogen peroxide or its interference with the analytes of interest. The EECL emission has been optimized by an investigation of the applied potentials, electrochemical polymerization conditions, template and modifier concentrations, and the pH solution. Under the optimum conditions, the EECL signal depended linearly on the Ket concentration within a range from 0.1 to 1.25 μM with a limit of detection (LOD) of 0.08 μM. The sensor exhibited very good recovery percentages ranging from 92% to 101% in urine samples, while precisions were ≤3%. These results suggested that the proposed sensor would be applicable for analysis Ket in complex matrixes without interfering of other drugs (anesthetics) and thus has the potential to be used in clinical application.

Electrochemiluminescence in “Planar” Micropore for Application in Single Cell Cytokine Biosensing

The immune response is a complex process involving interactions mediated by cellular secretions (cytokines). These key proteins dictate each cell’s behavior and are thus important markers to decipher the immune response. Produced in very low quantities, at the single cell level, their efficient detection is still a bottleneck for the complete understanding of the immune process.Since the early 2000s, biosensors based on micro and nanopores have emerged for the detection and identification of biomolecules [1]. However, the main challenge of such biosensors remains the appropriate functionalization of pores for selectivity. Previsouly, we developed a contactless electrofunctionalization technique (CLEF) for the localized functionalization of the inner walls of a pore, drilled in a silicon membrane covered with SiO2 [2]. The main advantage of this technique is that it only functionalizes the pore and not the surrounding membrane. The functionalization mechanism is inspired by bipolar electrochemistry (BPE) where a voltage is applied between two electrodes positioned at each side of the pore, allowing electrochemical reactions exclusively at the restriction site, which is polarized under the applied voltage.More recently, we have adapted CLEF to « planar » micropores i.e. restrictions in microfluidic channels, which are easier to integrate into microfluidic devices. We have successfully performed, inside of a silicon planar micropore, i) the bipolar electropolymerization of pyrrole [3] and ii) the bipolar electrochemiluminescence (ECL) [4,5], in a locally controlled manner. In this work, we aim to combine bipolar functionalization and bipolar ECL to conceive relevant biosensors for cytokine detection. To take into account the ECL requirements, polymers with higher over oxidation potential are selected. To achieve efficient localized BPE on Si, dedicate microfluidic design with two different canal thicknesses were developed and tested.As a proof of concept, we illustrate reproducible analytes detection by ECL on silicon inside of a microfluidic device. The specific biorecognition of these analytes is achieved via aptamer and antibody recognition.Two different strategies of functionalization were evaluated in terms of stability of the ECL behavior: 1) direct copolymerization of thiophene derivatives on bare Si and 2) copolymerization on electrodeposited Au. Moreover, since our final goal is to achieve detection of single cell secretions, the microfluidic setup was also simulated using a multiphysics simulation to ensure the device’s capability to trap and isolate single cells.This platform should allow further development of devices for the detection of various cytokines at the single cell level.Ref :[1] M. Tsutsui, et al., Sci. Rep. 2017, 17371[2] A. Bouchet et al. 2009 Small, 5: 2297-2303.[3] Abdulghani Ismail et al. Adv.Mater. Technol.2021, 6, 2001154[4] Silvia Voci et al. 2020 J. Electrochem. Soc. 167 137509[5] Abdulghani Ismail et al., Analytical Chemistry 2019 91 (14), 8900-8907 Figure 1

Electrocatalytic amplification of coreactant electrochemiluminescence using redox mediators

Electrochemiluminescence (ECL) has emerged as a sensitive analytical technique with a wide range of applications. While recent studies have begun to explore the role of redox mediators to facilitate ECL systems, this work extends these foundational insights by developing a comprehensive theoretical framework that supports, generalizes, and rationalizes mechanistic pathways borrowed from molecular electrocatalysis. This advancement is demonstrated through the electrocatalytic amplification of coreactant ECL within the [Ru(bpy)3]2+/TPrA system, utilizing a water-soluble redox-active Ir(III) complex as an electrocatalyst. Our investigation unveils previously uncharted mechanisms that enable the enhancement of Ru complex ECL at low electrode potentials, crucially without requiring the direct oxidation of [Ru(bpy)3]2+ or TPrA at the electrode, thus offering a deeper understanding of ECL activation through moelcular electrocatalysis. Through an integrated approach combining electrochemical analysis, spectroscopic investigation, and finite element modeling, we elucidate how the redox mediator critically modulates ECL efficiency by controlling the kinetics of radical species production and decay. The mediation by the Ir(III) complex not only governs the generation of TPrA radicals and excited [Ru(bpy)3]2+ states, thereby enhancing ECL intensity, but also the conditions under which ECL can be quenched. Further exploration of the mediator's redox characteristics provides predictive insights into ECL behavior, underscoring the mediator's redox potential as pivotal in determining ECL onset, peak potential, and intensity. This refined understanding paves the way for tailoring ECL systems for enhanced performance in analytical, imaging, and biomedical applications through the judicious selection of redox mediators.

A self-reinforced luminescence signal amplification strategy to construct electrochemiluminescence immunosensor for carcinoembryonic antigen sensing

Carcinoembryonic antigen (CEA) is a disease biomarker that reflects the presence of various cancers and tumors in the human body. Sensitive detection of CEA concentration in the blood is beneficial for the clinical diagnosis and treatment evaluation of cancer. Electrochemiluminescence (ECL) sensors used for disease pre-screening are usually subjected to various complex chemical modifications for real-time analysis and detection of CEA concentration in the blood. The ECL behavior of a novel self-reinforced ECL complexes Zn-MOF-Ru-TEA coreacting at the anode is reported in this paper. The self-reinforced ECL complexes Zn-MOF-Ru-TEA are synthesized using one-pot method. Compared with the redox reaction of TEA in the PBS buffer, the energy and charge transport distance provided by Ru(bpy)32+ and TEA molecules in the pore size of Zn-MOF are greatly shortened, so the ECL efficiency of Ru(bpy)32+ is effectively improved. The Cu+/Cu2+ ion pair cycle in the signal label CuNiOS/Au NPs can react with TEA enriched in Zn-MOF-Ru-TEA to produce more reactive radicals, which realizes the amplification strategy of the ECL signal caused by Cu+-triggered probes. Under optimal conditions, the linear range of CEA detection is 10−5 ng·mL−1 to 80 ng·mL−1, and the detection limit is 3.43 fg·mL−1. This is the first time that a Ru(bpy)32+/TEA self-reinforced ECL system has been proposed for CEA detection, which has the advantages of low limit of detection and high sensitivity and offers the potential for the application of sensitive determination of biomarkers.

Electrochemiluminescence Sensor Based on TPEA‐RuMOF: For Highly Selective and Sensitive Detection of Copper Ions

AbstractIn this study, we present the novel combination of AE‐TPEA with RuMOF to construct an electrochemiluminescence (ECL) sensor using a TPEA‐RuMOF composite material specifically for copper ions (Cu2+) detection. Using K2S2O8 as a co‐reactant, we explored the ECL behavior of the TPEA‐RuMOF modified electrode, enabling the quantitative detection of Cu2+. Remarkably, this sensor exhibited a wide linear range from 1×10−5 to 1×10−9 M (R2=0.998) and boasted a detection limit as low as 0.41 nM, which is considerably below the EPA (Environmental Protection Agency) permissible copper ion concentration in drinking water of <1.3 mg/L. our synthesized probe offers enhanced stability and selectivity in copper ion detection. This indicates its considerable potential for high‐performance copper ion detectors. We further validated the analytical applicability of this sensor using river water samples.

Ultrastable Luminol-OH--(Ni-WOx-CNT) ECL System with High Strength and Its Applications in Sensing.

In traditional luminol electrochemiluminescence (ECL) systems, hydrogen peroxide (H2O2) and dissolved oxygen (DO) are the commonly used coreactants to generate reactive oxygen species (ROS) for ECL emission. However, the self-decomposition of hydrogen peroxide and the limited solubility and content of oxygen in solution undoubtedly restrict the luminescence efficiency and stability of the luminol ECL system. Inspired by the ROS-mediated ECL mechanism, we pioneered hydroxide ion as an advanced luminol ECL coreactant using nickel-doped and carbon nanotube-modified tungsten oxide (Ni-WOx-CNT) as the coreactant accelerator. Owing to the excellent catalytic activity of Ni-WOx-CNT, amounts of ROS were generated from OH- at a low excitation voltage, which subsequently reacted with luminol anion radicals and triggered intense ECL signals. Experiments confirmed an impressive ECL behavior in terms of high luminescent intensity (85,563 a.u.) and super stability over 1300 consecutive tests; both are superior to those recently reported luminol-H2O2 and luminol-DO systems with smaller ECL intensities and consecutive tests less than 25 times. To validate the feasibility and versatility of the developed system in sensor, traditional three-electrodes system and closed bipolar electrodes system with various sensing strategies of direct oxidation, "gate-effect" of molecularly imprinted polymer, immune reaction, and enzyme-catalyzed reaction were proposed to monitor uric acid (UA), C-reactive protein (CRP), immunoglobulin G (IgG), and glucose (Glu). The superior sensing performances confirmed the great application potential of the developed ROS-mediated ECL system.

Tuning electrochemical water activation over NiIr single-atom alloy aerogels for stable electrochemiluminescence

The anodic oxygen evolution reaction is a well-acknowledged side reaction in traditional aqueous electrochemiluminescence (ECL) systems due to the generation and surface aggregation of oxygen at the electrode, which detrimentally impacts the stability and efficiency of ECL emission. However, the effect of reactive oxygen species generated during water oxidation on ECL luminophores has been largely overlooked. Taking the typical luminol emitter as an example, herein, we employed NiIr single-atom alloy aerogels possessing efficient water oxidation activity as a prototype co-reaction accelerator to elucidate the relationship between ECL behavior and water oxidation reaction kinetics for the first time. By regulating the concentration of hydroxide ions in the electrolyte, the electrochemical oxidation processes of both luminol and water are finely tuned. When the concentration of hydroxide ions in electrolyte is low, the kinetics of water oxidation is attenuated, which limits the generation of oxygen, effectively mitigates the influence of oxygen accumulation on the ECL strength, and offers a novel perspective for harnessing side reactions in ECL systems. Finally, a sensitive and stable sensor for antioxidant detection was constructed and applied to the practical sample detection.

Enhancing electrochemiluminescence for chloramphenicol detection based on the synergistic effect of doped Ti3C2 with ultrasound

Chloramphenicol (CAP) is known to be harmful to the environment and food, posing a threat to human health. Developing an effective and convenient method for detecting CAP is crucial. An electrochemiluminescence (ECL) biosensor has been designed for sensitive detection of CAP. The improved ECL behavior was attributed to the synergistic effect of N and P co-doped Ti3C2-Apt1 (N, P-Ti3C2-Apt1) nanoprobes and high intensity focused ultrasound (HIFU) pretreatment. The doping of N and P could improve the electrochemical performance of Ti3C2. HIFU pretreatment generated more reactive oxygen species (ROS) in the luminol-O2 system. N, P-Ti3C2 could aggregate and catalyze ROS, causing an increase in ECL intensity. Furthermore, N, P-Ti3C2 as a carrier loaded more aptamer, which could recognize CAP with high specificity. The detection limit was 0.01 ng/mL. This biosensor has been successfully applied in milk and environmental water samples, highlighting its potential in the field of food and environmental analysis.

An electrochemiluminescence sensor based on lanthanide bimetallic MOFs with a “cascade sensitization mechanism” for the sensitive detection of CA242

Lanthanide metal-organic frameworks (Ln-MOFs) broaden the optical sensing applications of lanthanide ions due to the antenna effect between organic ligands and metals. However, the sensitization ability of the ligand to metal ions is limited, and maximizing the sensitization of the electrochemiluminescence behavior of Eu3+ is still a challenge for the application of Ln-MOFs. Therefore, under the guidance of the “cascade sensitization mechanism” based on the antenna effect sensitizing the electrochemiluminescence of bimetallic Ln-MOFs, we proposed Eu/Tb-MOFs with high luminescence intensity as a signal probe. According to the antenna effect, the conjugated structure and high extinction coefficient of the benzene ring of 2-amino terephthalic acid (NH2-BDC) can enhance the ECL luminescence intensity of Eu/Tb-MOFs. Tb3+ can act as an energy bridge between NH2-BDC and Eu3+, buffering the energy gap. The bimetallic sensitization is formed between Tb3+ and Eu3+, which can inhibit the reverse internal flow of energy and ensure the high luminous efficiency of Eu3+. In addition, the nanosphere mixed valence Fe3O4 as a co-reactant accelerator promotes the formation of transient free radical SO4•- through the valence change of Fe2+/Fe3+. The ECL immunosensor constructed by luminophores Eu/Tb-MOFs and nanosphere Fe3O4 provided a new explanation for the ECL self-luminous of Eu/Tb-MOFs.

Cyanuric Acid-Functionalized Perovskite Nanocrystals toward Low Interface Impedance, High Environmental Stability, and Superior Electrochemiluminescence.

Perovskite nanocrystals (PNs) have received much attention as luminescence materials in the field of electrochemiluminescence (ECL). However, as one key factor for determining the optoelectronic properties of the surface state of PNs, the surface passivation layer of PNs has enormous difficulty in simultaneously meeting the requirements of high ECL efficiency, conductivity, and stability. Herein, an effective surface modification strategy with cyanuric acid (CA) is used to solve such issue. As confirmed, the CA molecules are chemically anchored onto the surface of PNs via the Lewis interaction between π electrons of the triazine ring and the empty orbit of Pb2+. Benefiting from the above interaction, the electrochemical impedance of PNs is decreased greatly without the loss of light-emitting efficiency. Moreover, the stability of PNs under O2 exposure is improved by almost sixfold. These improvements are confirmed to be beneficial for enhancing the ECL behaviors of PNs under electrochemical operation. Upon cathode ECL driving conditions in aqueous media, the ECL intensity and efficiency of PNs are increased to 200 and 170%, respectively. This work provides a new modification strategy to holistically improve the ECL performance of PNs, which is instructive to exploring robust perovskite nanomaterials for electrochemical applications.

Rapid and sensitive electrochemiluminescence detection using easily fabricated sensor with an integrated two-electrode system.

The electrochemiluminescence (ECL) behavior of a tri(2,2'-bipyridyl)ruthenium(ii) (Ru(bpy)32+)/tripropylamine (TPrA) system was investigated in sensor chips with two kinds of integrated two-electrode systems, which included screen-printed electrodes (SPE) and physical vapor deposition (PVD) electrodes. Firstly, under excitation with an optimal transient potential (TP) within 100 ms, the ECL assay could be carried out on the microchips using an Au & Au electrode system, emitting strong and stable light signal. Secondly, on the PVD chip, the ECL intensity initiated by optimal TP was eight times stronger than the peak light signal emitted by the linear sweep voltammetry model. Finally, the logarithmic ECL intensities exhibited a linear increase with the logarithmic concentrations of Ru(bpy)32+ in both the SPE and PVD chips without any reference electrode (RE). Typically, the integration of an interdigital two-electrode system in the microchip significantly enhanced the ECL sensitivity of Ru(bpy)32+ because the large relative area between the working electrode (WE) and counter electrode (CE) achieved a highly efficient mass transfer. This improvement enabled the establishment of a reliable linear relationship across a wide concentration range, spanning from 1 pM to 1 μM (R2 = 0.998). Therefore, the exceptional ECL response of the Ru(bpy)32+/TPrA system on microfluidic chips using a two-electrode system and the TP excitation model has been demonstrated. This suggests that ECL chips without a RE have broad potential for the rapid and sensitive detection of multiple targets.

Complex electrochemiluminescence patterns shaped by hydrodynamics at a rotating bipolar electrode.

Electrochemiluminescence (ECL) is a powerful analytical approach that enables the optical readout of electrochemical processes. Over the last few years, ECL has gained considerable attention due to its large number of applications, including chemical sensing, bioanalysis and microscopy. In these fields, the promotion of ECL at bipolar electrodes has offered unprecedented opportunities thanks to wireless electrochemical addressing. Herein, we take advantage of the synergy between ECL and bipolar electrochemistry (BE) for imaging light-emitting layers shaped by hydrodynamics, polarization effects and the nature of the electrochemical reactions taking place wirelessly on a rotating bipolar electrode. The proof-of-principle is established with the model ECL system [Ru(bpy)3]2+/tri-n-propylamine. Interestingly, the ECL-emitting region moves and expands progressively from the anodic bipolar pole to the cathodic one where ECL reactants should neither be generated nor ECL be observed. Therefore, it shows a completely unusual behavior in the ECL field since the region where ECL reagents are oxidized does not coincide with the zone where ECL light is emitted. In addition, the ECL patterns change progressively to an "ECL croissant" and then to a complete ring shape due to the hydrodynamic convection. Such an approach allows the visualization of complex light-emitting patterns, whose shape is directly controlled by the rotation speed, chemical reactivity and BE-induced polarization. Indeed, the bipolar electrochemical addressing of the electrode breaks the circular symmetry of the reported rotating system. This unexplored and a priori simple configuration yields unique ECL behavior and raises new curious questions from the theoretical and experimental points of view in analytical chemistry. Finally, this novel wireless approach will be useful for the development of original ECL systems for analytical chemistry, studies of electrochemical reactivity, coupling microfluidics with ECL and imaging.

Neuron specific enolase assay based on the perovskite CoSn(OH)6 for enhancing the anodic electrochemiluminescence of luminol

Electrochemiluminescence (ECL) is a widely applied technique for trace detection and analysis, but the stability of luminophores and external environmental factors strongly influence the analysis results. Herein, a low-potential ECL sensing platform based on enhanced nanomaterial catalysis for the traditional system luminol-H2O2 is proposed for the detection of neuron specific enolase (NSE). In this strategy, Au nanoparticles modified with three-dimensional graphitic phase carbon nitride (3DCNA) were used as a solid platform for antibodies (Ab2), which not only solved the problem of accumulation between traditional two-dimensional nanosheets but also had good biocompatibility, ensuring the accuracy of the analysis results. CoSn(OH)6, benefiting from its inherently higher catalytic activity and greater number of adsorption sites on perovskite hydroxide, can catalyze the oxidationreduction reaction of H2O2 to improve the ECL behavior of luminol and lower the applied voltage to reduce damage to biological activity. Owing to these exceptional properties, this proposed sandwich ECL immunosensor was explored for the primary diagnosis of SCLC by detecting NSE with a detection limit of 0.18 pg mL–1. It exhibited satisfactory linearity in the range of 0.0005 ng mL–1 to 100 ng mL–1 with favorable stability, excellent specificity, and good reproducibility. This study provides an important reference for low-potential ECL with promising application prospects in actual clinical analysis and detection.

Synergistic Multieffect Catalytic Amplified Cathodic Electrochemiluminescence Biosensor via Target Binding-Induced Aptamer Conformational Changes for the Ultrasensitive Detection of Synthetic Cathinone.

Signal amplification is a powerful approach to increasing the detection sensitivity of electrochemiluminescence (ECL). Here, we developed synergistic multieffect catalytic strategies based on CuCo2O4 nanorod combination of Ag NPs as coreaction accelerators to fabricate an efficient covalent organic framework (PTCA-COF)-based ternary ECL biosensor. Concretely, the high redox reversibility of Co3+/Co2+ and Cu2+/Cu+ would constantly promote the decomposition of S2O82- for ECL emission. Meanwhile, the introduction of Ag NPs with excellent electrocatalytic activity further realized multiple amplification of the ECL signal. Furthermore, the good hydrogen evolution reaction (HER) ability of Ag@CuCo2O4 nanorods could accelerate the proton transmission rate of the system to amplify ECL behavior. In the presence of the target synthetic cathinone 4-chloroethcathinone (4-CEC) as the quenching ECL signal-response probe, the Ferrocene (Fc)-labeled aptamer folded into the conformationally limited stem-loop structure, bringing Fc near the ECL luminophore and resulting in quenched ECL emission. The quenching effect was connected with target-induced aptamer conformational changes and consequently reflected the target concentration. Under optimum conditions, the proposed biosensor realized a highly sensitive assay for 4-CEC with a large dynamic range from 1.0 × 10-12 to 1.0 × 10-6 g/L and a detection limit as low as 2.5 × 10-13 g/L. This study integrated multiple amplification strategies for efficient ECL enhancement, which provided a novel approach to constructing highly bioactive and sensitive sensors.

Aggregation-Induced Enhanced Electrochemiluminescence from Tris(bipyridine)ruthenium(II) Derivative Nanosheets for the Ultrasensitive Detection of Human Telomerase RNA.

The traditional tris(bipyridine)ruthenium(II) complex suffers from the notorious aggregation-caused quenching effect, which greatly compromises its electrochemiluminescence (ECL) efficiency, thus hindering further applications in biosensing and clinical diagnosis. Here, the ultrathin tetraphenylethylene-active tris(bipyridine)ruthenium(II) derivative nanosheets (abbreviated as Ru-TPE NSs) are synthesized through a protein-assisted self-assembly strategy for ultrasensitive ECL detection of human telomerase RNA (hTR) for the first time. The synthesized Ru-TPE NSs exhibit the aggregation-induced enhanced ECL behavior and excellent water-dispersion. Surprisingly, up to a 106.5-fold increase in the ECL efficiency of Ru-TPE NSs is demonstrated compared with the dispersed molecules in an organic solution. The restriction of intramolecular motions is confirmed to be responsible for the significant ECL enhancement. Therefore, this proposed ECL biosensor shows high sensitivity and excellent selectivity for hTR based on Ru-TPE NSs as efficient ECL beacons and the catalytic hairpin assembly as signal amplification, whose detection limit is as low as 8.0fm, which is far superior to the previously reported works. Here, a promising analytical method is provided for early clinical diagnosis and a new type of efficient ECL emitters with great application prospects is represented.

Dual-functional Nanomaterials Polyo-phenylenediamine and Ru-Au Complement Each Other to Construct an Electrochemical and Electrochemiluminescent Dual-Mode Aptamer Sensor for Sensitive Detection of Alternariol.

To sensitively monitor trace amounts of alternariol (AOH) in fruits, a dual-mode aptamer sensor utilizing the dual-function nanomaterial PoPD/Ru-Au was developed. This sensor provides both electrochemical (EC) and electrochemiluminescence (ECL) signals, which can greatly avoid the potential false positive of the traditional single signal, thus enhancing the accuracy and reliability of detection results. Polyo-phenylenediamine (PoPD), known for its favorable EC response, can also assist in enhancing the ECL behavior of Ru-Au. Furthermore, Ru-Au demonstrates excellent ECL performance and effectively activates K2S2O8 to amplify the EC response of PoPD. The complementary effect of the two can effectively amplify the final detection signal. Additionally, the PoPD/Ru-Au nanomaterial exhibits excellent electrical conductivity, further enhancing the EC and ECL response signals. The experimental results demonstrate that the EC detection range of AOH was 0.01-100 ng/mL, while the ECL detection range was 0.001-100 ng/mL, both exhibiting a satisfactory linear relationship. Therefore, the mutual verification of the detection results can be highly realized, and the purpose of avoiding wrong detection can be achieved.

Construction of electrochemical and electrochemiluminescent dual-mode aptamer sensors based on ferrocene dual-functional signal probes for the sensitive detection of Alternariol

In this study, a novel dual-mode aptamer sensor was developed using Fca-DNA2 as the quenching electrochemiluminescence (ECL) and electrochemical (EC) signal response probe, and Ru-MOF/Cu@Au NPs were used as the ECL substrate platform to detect Alternariol (AOH) via a competitive reaction between AOH and Fca-DNA2. Compared with the conventional aptamer sensor with a single detection signal, this dual-mode aptamer sensor has the following advantages: (1) Electrodeposition-based rapid synthesis Ru-MOF on the electrode surface. (2) The Signal amplification substance Cu@Au NPs can synergistically catalyze Triethanolamine (TEOA) to amplify ECL behavior. (3) The aptamer sensor employs the dual-functional material Fca, which can detect both ECL and EC signals, increasing the result accuracy. Both ECL and EC methods have excellent detection performance for AOH in the detection range of 0.1 pg/mL to 100 ng/mL, with detection limits of 0.014 and 0.083 pg/mL, respectively, and are expected to be used for sensitive AOH detection in real samples.

Unique Electrochemiluminescent Behavior of two Quinolones, Enoxacin and Nadifloxacin, and their Sensing Application

This research looked at the electrochemiluminescence (ECL) signals of two quinolones: Enoxacin (Enox) and Nadifloxacin (Nadf), which were investigated in H3BO3-Na2B4O7 buffered solutions containing the co-reactant K2S2O8. Based on the fluorescence (FL) spectra, ECL spectra, and corresponding ECL experiments, a possible mechanism of the ECL reaction was proposed. The effect of experimental conditions on quinolone ECL behavior was studied and optimized, so we revealed the value of organic molecules as ECL luminophores. According to calculations, Nadifloxacin has a smaller LUMO-HOMO band gap than Enoxacin, making it more suitable for use as a luminophore. Furthermore, we discovered a quenching effect of lead ion (Pb2+) on the ECL signal of Nadifloxacin, and we focused on the Pb2+ quenching mechanism in this system and made reasonable guesses. We invented a novel technique for ECL detection of Pb2+ with high sensitivity and selectivity. This method demonstrates the potential application of ECL in pollution management.