Electrochemical Biosensor Research Articles

Integrating Wireless Remote Sensing and Sensors for Monitoring Pesticide Pollution in Surface and Groundwater.

Water constitutes an indispensable resource crucial for the sustenance of humanity, as it plays an integral role in various sectors such as agriculture, industrial processes, and domestic consumption. Even though water covers 71% of the global land surface, governments have been grappling with the challenge of ensuring the provision of safe water for domestic use. A contributing factor to this situation is the persistent contamination of available water sources rendering them unfit for human consumption. A common contaminant, pesticides are not frequently tested for despite their serious effects on biodiversity. Pesticide determination in water quality assessment is a challenging task because the procedures involved in the extraction and detection are complex. This reduces their popularity in many monitoring campaigns despite their harmful effects. If the existing methods of pesticide analysis are adapted by leveraging new technologies, then information concerning their presence in water ecosystems can be exposed. Furthermore, beyond the advantages conferred by the integration of wireless sensor networks (WSNs), the Internet of Things (IoT), Machine Learning (ML), and big data analytics, a notable outcome is the attainment of a heightened degree of granularity in the information of water ecosystems. This paper discusses methods of pesticide detection in water, emphasizing the possible use of electrochemical sensors, biosensors, and paper-based sensors in wireless sensing. It also explores the application of WSNs in water, the IoT, computing models, ML, and big data analytics, and their potential for integration as technologies useful for pesticide monitoring in water.

Combining WO3@AuNPs with Poly(amidoamine) Allows Sensitive Electrochemical Detection of DR1 Based on Dual Signal Amplification.

Down-regulator of transcription 1 (DR1) is considered as a biomarker of hashimoto's thyroiditis (HT), which is a risk factor for thyroid cancer. Here, a label-free electrochemical biosensor for DR1 detection was constructed based on polyamidoamine (PAMAM) polymer and the nanocomposite (WO3@AuNPs) composed of tungsten trioxide (WO3) and gold nanoparticles (AuNPs). WO3@AuNPs was obtained by combining monolayer WO3 nanosheets, which has high conductivity, and AuNPs. The modification of WO3@AuNPs can not only increase the conductivity of the electrode but also provide more active sites for signaling units, thus greatly improve the sensitivity of the sensor. The polymer PAMAM is biocompatible and non-immunogenic, and its end functional group can bind to the target molecules, providing them with more binding sites and thus improving the sensitivity of the sensor. Under optimal conditions, the label-free biosensor showed a good linear relationship between the logarithm of DR1 concentration and the impedance in the range of 10 fg ⋅ mL-1 to 100 ng ⋅ mL-1, with a detection limit as low as 0.3 fg ⋅ mL-1. Besides, this label-free electrochemical platform exhibited satisfactory selectivity and anti-interference capability in human serum samples. Therefore, this method has considerable potential in clinical detection of DR1.

Innovations in microRNA-based electrochemical biosensors for essential hypertension.

Innovations in microRNA-based electrochemical biosensors for essential hypertension.

A "2-in-1" Bioanalytical System Based on Nanocomposite Conductive Polymers for Early Detection of Surface Water Pollution.

This work proposes an approach to the formation of receptor elements for the rapid diagnosis of the state of surface waters according to two indicators: the biochemical oxygen demand (BOD) index and toxicity. Associations among microorganisms based on the bacteria P. yeei and yeast S. cerevisiae, as well as associations of the yeasts O. polymorpha and B. adeninivorans, were formed to evaluate these indicators, respectively. The use of nanocomposite electrically conductive materials based on carbon nanotubes, biocompatible natural polymers-chitosan and bovine serum albumin cross-linked with ferrocenecarboxaldehyde, neutral red, safranin, and phenosafranin-has made it possible to expand the analytical capabilities of receptor systems. Redox polymers were studied by IR spectroscopy and Raman spectroscopy, the contents of electroactive components were determined by atomic absorption spectroscopy, and electrochemical properties were studied by electrochemical impedance and cyclic voltammetry methods. Based on the proposed kinetic approach to modeling individual stages of bioelectrochemical processes, the chitosan-neutral red/CNT composite was chosen to immobilize the yeast association between O. polymorpha (ks = 370 ± 20 L/g × s) and B. adeninivorans (320 ± 30 L/g × s), and a bovine serum albumin (BSA)-neutral composite was chosen to immobilize the association between the yeast S. cerevisiae (ks = 130 ± 10 L/g × s) and the bacteria P. yeei red/CNT (170 ± 30 L/g × s). After optimizing the composition of the receptor systems, it was shown that the use of nanocomposite materials together with associations among microorganisms makes it possible to determine BOD with high sensitivity (with a lower limit of 0.6 mg/dm3) and detect the presence of a wide range of toxicants of both organic and inorganic origin. Both receptor elements were tested on water samples, showing a high correlation between the results of biosensor analysis of BOD and toxicity and the results of standard analytical methods. The results obtained show broad prospects for creating sensitive and portable bioelectrochemical sensors for the early warning of environmentally hazardous situations based on associations among microorganisms and nanocomposite materials.

Electrochemical biosensor based on the integration of maple leaf-like gold nanocrystal and truncated aptamer for detection of α-amanitin with high sensitivity, selectivity and rapidity

This study reports the fabrication of three-dimensional gold nanocrystals as sensing material in the presence of l-glutathion and high-performance aptamer with 20 bases of α-amanitin via truncation and optimization of along aptamer. The resulting maple leaf–like gold nanocrystal (ML-Au) exhibits an improved catalytic activity due to more exposed high-index facets. The use of truncated aptamer increases the sensitivity by 15 times and reduces the reaction time by two times compared with those of original aptamer. An α-amanitin electrochemical biosensor constructed by integrating ML-Au nanocrystals with truncated aptamer exhibits high sensitivity, selectivity and rapidity. An increase of the α-amanitin concentration in the range of 1 × 10−14–1 × 10−9 M causes a linear decrease in the amperometric current with a limit of detection of 2.9 × 10−15 M (S/N = 3). The proposed analytical method is satisfactorily used for electrochemical sensing of α-amanitin in urine and wild mushroom samples.

Detection of fucosylated extracellular vesicles miR-4732-5p related to diagnosis of early lung adenocarcinoma by the electrochemical biosensor

Our preliminary investigation has identified the potential of serum fucosylated extracellular vesicles (EVs) miR-4732-5p in the early diagnosis of lung adenocarcinoma (LUAD) by a fucose-captured strategy utilizing lentil lectin (LCA)-magnetic beads and subsequent screening of high throughput sequencing and validation of real-time quantitative polymerase chain reaction (RT-qPCR). Considering the relatively complicated procedure, expensive equipment, and stringent laboratory condition, we have constructed an electrochemical biosensor assay for the detection of miR-4732-5p. miR-4732-5p is extremely low in serum, down to the fM level, so it needs to be detected by highly sensitive electrochemical methods based on the Mg2+-dependent DNAzyme splitting nucleic acid lock (NAL) cycle and hybridization chain reaction (HCR) signal amplification. In this study, signal amplification is achieved through the dual amplification reactions using NAL cycle in combination with HCR. In addition, hybridized DNA strands bind to a large number of methylene blue (MB) molecules to enhance signaling. Based on the above strategy, we further enhance our signal amplification strategies to improve detection sensitivity and accuracy. The implementation of this assay proceeded as follows: initially, miR-4732-5p was combined with NAL, and then Mg2+-dependent DNAzyme splitted NAL to release auxiliary DNA (S1) strands, which were subsequently captured by the immobilized capture probe DNA (C1) strands on the electrode surface. Following this, abundant quantities of DNA1 (H1) and DNA2 (H2) tandems were generated by HCR, and S1 strands then hybridized with the H1 and H2 tandems through base complementary pairing. Finally, MB was bonded to the H1 and H2 tandems through π–π stacking interaction, leading to the generation of a signal current upon the detection of a potential capable of inducing a redox change of MB by the electrode. Furthermore, we evaluated the performance of our developed electrochemical biosensor assay. The results demonstrated that our assay is a reliable approach, characterized by its high sensitivity (with a detection limit of 2.6 × 10−17 M), excellent specificity, good accuracy, reproducibility, and stability. Additionally, it is cost-effective, requires simple operation, and is portable, making it suitable for the detection of serum fucosylated extracellular vesicles miR-4732-5p. Ultimately, this development has the potential to enhance the diagnostic efficiency for patients with early-stage LUAD.

Liquid-colloid-solid modular assembly for three-dimensional electrochemical biosensing of small molecules

Electrochemical biosensors hold promise for advanced analytical applications in modern life analysis due to their miniaturization and cost-effectiveness. Nevertheless, their implementation in complex biological systems necessitates overcoming challenges related to timeliness, sensitivity, and interference resistance. Here, we developed a novel DNA hydrogel three-dimensional electron transporter through liquid-colloid-solid assembly, integrating electronic mediators and employing porous electrode covers with 3D printing technology. Our approach facilitated the fabrication of a high-performance electrochemical sensor for small molecule detection, leveraging target-specific aptamers and catalytic hairpin assembly (CHA) elements within the DNA hydrogel, which exhibited outstanding selectivity, sensitivity, and universality, achieving detection limits of 0.047 nM for kanamycin and 2.67 pM for ATP. Furthermore, this sensor could detect kanamycin in real samples, demonstrating good accuracy and robust anti-interference capabilities in human serum. Our work not only possesses substantial application value in clinical sample analysis but also represents a breakthrough in traditional strategies, thereby contributing to advancements in the application of electrochemical biosensors for life analysis.

Development of ratiometric DNA biosensors with improved accuracy, precision, and signal-to-noise ratio

Ratiometric DNA biosensors, which utilize DNA as the recognition element and integrate dual signals from diverse sensing platforms including fluorescence, electrochemistry, and surface-enhanced Raman scattering (SERS), have demonstrated remarkable proficiency in detecting a wide range of targets. In this review, we showcase the significant progress achieved by ratiometric biosensors. Firstly, ratiometric biosensors have made notable advancements in analyzing real samples. These include the analysis of pH values near cancer cells, quantification of miRNA in human cell lysates, detection of human telomerase RNA in cell extracts, and performing DNA logic-gated in situ bioimaging on cell membranes. Secondly, excellent sensitivity has been attained through the utilization of effective amplification methods such as RCA, HCR, and CHA, among others. Thirdly, the construction of stable reference signals has resulted in significantly improved precision for ratiometric biosensors. This breakthrough has overcome matrix effects, enabling reliable detection in real samples with high selectivity. This review provides a comprehensive overview of recent advancements in strategies employed by ratiometric DNA biosensors. We present three types of biosensors based on distinct sensing platforms: fluorescent, electrochemical, and SERS biosensors. Additionally, we discuss future directions and primary challenges in the development of ratiometric DNA biosensors.

Electrochemical Sensors and Biosensors for Identification of Viruses: A Critical Review.

Due to their life cycle, viruses can disrupt the metabolism of their hosts, causing diseases. If we want to disrupt their life cycle, it is necessary to identify their presence. For this purpose, it is possible to use several molecular-biological and bioanalytical methods. The reference selection was performed based on electronic databases (2020-2023). This review focused on electrochemical methods with high sensitivity and selectivity (53% voltammetry/amperometry, 33% impedance, and 12% other methods) which showed their great potential for detecting various viruses. Moreover, the aforementioned electrochemical methods have considerable potential to be applicable for care-point use as they are portable due to their miniaturizability and fast speed analysis (minutes to hours), and are relatively easy to interpret. A total of 2011 articles were found, of which 86 original papers were subsequently evaluated (the majority of which are focused on human pathogens, whereas articles dealing with plant pathogens are in the minority). Thirty-two species of viruses were included in the evaluation. It was found that most of the examined research studies (77%) used nanotechnological modifications. Other ones performed immunological (52%) or genetic analyses (43%) for virus detection. 5% of the reports used peptides to increase the method's sensitivity. When evaluable, 65% of the research studies had LOD values in the order of ng or nM. The vast majority (79%) of the studies represent proof of concept and possibilities with low application potential and a high need of further research experimental work.

A novel aptamer-antibody sandwich electrochemical sensor for detecting ADAR1 in complex biological samples

Human adenosine deaminase acting on RNA1 (ADAR1) is an adenosine-to-inosine (A-to-I) RNA-editing enzyme involved in various types of cancer progression. ADAR1 has emerged as a novel prognostic biomarker for cancer. This study describes the application of a newly identified 70-nt DNA aptamer (Apt38483) against ADAR1 to develop a portable and simple electrochemical biosensor platform for the rapid and sensitive detection of ADAR1 in cell lysates. We selected an ADAR1-specific DNA aptamer from a randomized 70-nt single-stranded DNA library using a competitive in vitro selection method. ADAR1 in the cell lysate was sandwiched onto a bare carbon working electrode of an electro-chemically printed chip between the ADAR1 antibody and gold nanoparticles (40 nm) conjugated with Apt38483, followed by electrochemical analysis using differential pulse voltammetry (DPV) for sensor demonstration. A highly sensitive change in current was observed for as little as 0.53 nM ADAR1 in human embryonic kidney cell lysate. Thus, the merging of a novel DNA aptamer probe for ADAR1 with an electrochemical transduction method enabled the development of a simple, low-cost, and rapid method for the direct measurement of ADAR1 in cell lysates and indicated great potential for the development of an ADAR1 analysis platform, which would be useful in cancer prognosis.

Ratiometric electrochemical biosensor based on Cu(II) modified covalent organic framework for the ultra-sensitive and specific detection of glutathione

As a vital biological polypeptide molecule, glutathione (GSH) is involved in the regulation of various life activities. Accurate and sensitive detection of GSH in human body is of great significance for the preliminary diagnosis of related diseases. In this research, Cu(II) modified TADH COF, which has been prepared by Cu2+ post-synthesis modification of the COF obtained through a condensation reaction of 1,3,5-(4-aminophenyl) benzene (TAPB) and 2,5-dihydroxy-1,4-benzenedicarboxaldehyde (DHTP), and methylene blue (MB) molecules are combined to construct a ratiometric electrochemical sensor for achieving specific and ultra-sensitive detection of GSH. As a stable and active covalent organic framework material, TADH COF possesses the special O(–OH) and N(CN) binding sites, which can load and coordinate with Cu2+ effectively. The obtained Cu(II)-TADH COF serves as a sensitive electrode material for sensing GSH due to “extrusion effect” caused CuCl solid-state electrochemical signal degeneration by the specific binding of Cu and GSH while MB provides a stable electrical signal in the electrochemical sensing process as an internal reference for eliminating errors and making the detection results more accurate. The constructed electrochemical sensing platform Cu(II)-TADH COF/MB/GCE exhibited an ultrahigh sensitivity with a limit of detection (LOD) of 0.0093 nM (S/N = 3), wide linear range of 0.05 nM–40 μM and high accuracy. For the detection of GSH in real samples including human blood, serum and urine samples, the sensor also showed excellent sensing performance. This is the first research on ratiometric electrochemical sensing platform for the ultra-sensitive detection of glutathione based on covalent organic frameworks, which provides an original and novel strategy for the electrochemical detection of GSH with COF materials.

Nucleic acid aptamer-based electrochemical sensor for the detection of serum P-tau231 and the instant screening test of Alzheimer's disease.

The instant screening of patients with a tendency towards developing Alzheimer's disease (AD) is significant for providing preventive measures and treatment. However, the current imaging-based technology cannot meet the requirements in the early stage. Developing biosensor-based liquid biopsy technology could be overcoming this bottleneck problem. Herein, we developed a simple, low-cost, and sensitive electrochemical aptamer biosensor for detecting phosphorylated tau protein threonine 231 (P-tau231), the earliest and one of the most efficacious abnormally elevated biomarkers of AD. Gold nanoparticles (AuNPs) were electrochemically synthesized on a glassy carbon electrode as the transducer, exhibiting excellent conductivity, and were applied to amplify the electrochemical signal. A nucleic acid aptamer was designed as the receptor to capture the P-tau231 protein, specifically through the formation of an aptamer-antigen complex. The proposed biosensor showed excellent sensitivity in detecting P-tau 231, with a broad linear detection range from 10 to 107pg/mL and a limit of detection (LOD) of 2.31pg/mL. The recoveries of the biosensor in human serum ranged from 97.59 to 103.26%, demonstrating that the biosensor could be used in complex practical samples. In addition, the results showed that the developed biosensor has good repeatability, reproducibility, and stability, which provides a novel method for the early screening of AD.

Copper ferrite nanoparticles anchored laser-induced graphene as novel nanoenzyme for the electrochemical catalyzing and sensing of β-estradiol in serum

β-estradiol is one of the most active hormones in steroids, and it plays a vital role in the human reproductive and non-reproductive systems. Compared with other methods for detecting β-estradiol, electrochemical biosensors are economical, simple, sensitive, and rapid. Herein, spinel copper ferrite nanoparticles and laser-induced graphene (LIG) were employed to functionalize screen-printed carbon electrodes (SPCE) for the first time, and it demonstrated that they have a synergistic effect on the catalysis of β-estradiol. Differential pulse voltammetry (DPV) was used to detect the changes in the peak current generated by the oxidation of β-estradiol. The nanoparticles were characterized by Fourier infrared spectroscopy, transmission electron microscope, scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), and X-ray Diffraction (XRD), and the composition elements and morphology of the nanoparticles were explained. The linear range of β-estradiol detected by this method is 0.1 ∼ 100 μM, R2 = 0.9992, and the detection limit is 3 nM. The sensor has good selectivity, reproducibility, repeatability, stability, and anti-interference performance. In rat serum, the recovery of the sensor at 100, 10, and 1 μM β-estradiol was 105 % ∼ 110 %, with relative standard deviations of 2.3 % ∼ 4.0 % (N = 3). This study shows that the sensor can be applied to detect actual samples and has potential application value for female reproductive-related diseases.

Label-free and label-based electrochemical detection of disease biomarker proteins.

Biosensors, analytical devices integrating biological sensing elements with physicochemical transducers, have gained prominence as rapid and convenient tools for monitoring human health status using biochemical analytes. Due to its cost-effectiveness, simplicity, portability, and user-friendliness, electrochemical detection has emerged as a widely adopted method in biosensor applications. Crucially, biosensors enable early disease diagnosis by detecting protein biomarkers associated with various conditions. These biomarkers offer an objective indication of medical conditions that can be accurately observed from outside the patient. This review comprehensively documents both label-free and labelled detection methods in electrochemical biosensor techniques. Label-free detection mechanisms elicit response signals upon analyte molecule binding to the sensor surface, while labelled detection employs molecular labels such as enzymes, nanoparticles, and fluorescent tags. The selection between label-free and labelled detection methods depends on various factors, including the biomolecular compound used, analyte type and biological binding site, biosensor design, sample volume, operational costs, analysis time, and desired detection limit. Focusing on the past six years, this review highlights the application of label-free and labelled electrochemical biosensors for detecting protein biomarkers of diseases.

Electrochemical xanthine biosensor based on carbon nanofiber and ferrocene carboxylic acid for the assessment of fish freshness

Electrochemical xanthine biosensor based on carbon nanofiber and ferrocene carboxylic acid for the assessment of fish freshness

Copper @ eggshell nanocomposite/chitosan gelified carbon paste electrode as an electrochemical biosensor for l-tyrosine analysis as a biomarker in the serum of normal and liver disease patients

L-Tyrosine (L-Tyr), an amino acid, has emerged as a potential biomarker for the detection and monitoring of liver cirrhosis (LC) and hepatocellular carcinoma (HCC). By analysing the serum levels of L-Tyr, healthcare professionals can gain insights into the progression and development of these liver diseases. The utilization of L-Tyr as a biomarker holds potential for early detection and timely intervention, improving patient outcomes and treatment options. In this study we developed a novel nanocomposite based on eggshell waste and copper nanoparticles to modify carbon paste electrode (CPE) using chitosan gel as a binder for sensitive estimation of L-Tyr in human serum samples. The use of chitosan gel avoids the insulating effect of paraffin oil that was usually used for fabrication of CPE and enhance the sensitivity and selectivity of the modified electrode. Square wave voltammetry (SWV) was used to optimize the electrochemical parameters of the oxidation of L-Tyr onto the surface of the fabricated electrode (CuNPs@ESh/CS/CPE). The prepared composite was characterized using X-ray diffraction (XRD), Fourier Transform − Infrared spectroscopy (FT-IR), UV–VIS spectroscopy and scan electron microscopy (SEM) and electrochemical impedence spectroscopy (EIS). The fabricated biosensor could estimate L-Tyr levels in controls, LC and HCC patients’ serum with high accuracy and sensitivity. The obtained results demonstrated the presence of significant difference in L-Tyr levels in the three studied groups. This indicates that L-Tyr amino acid may serve as a crucial biomarker for the evaluation of such liver diseases.

Nanostructured Metal Oxide-Based Electrochemical Biosensors in Medical Diagnosis.

Nanostructured metal oxides (NMOs) provide electrical properties such as high surface-to-volume ratio, reaction activity, and good adsorption strength. Furthermore, they serve as a conductive substrate for the immobilization of biomolecules, exhibiting notable biological activity. Capitalizing on these characteristics, they find utility in the development of various electrochemical biosensing devices, elevating the sensitivity and selectivity of such diagnostic platforms. In this review, different types of NMOs, including zinc oxide (ZnO), titanium dioxide (TiO2), iron (II, III) oxide (Fe3O4), nickel oxide (NiO), and copper oxide (CuO); their synthesis methods; and how they can be integrated into biosensors used for medical diagnosis are examined. It also includes a detailed table for the last 10 years covering the morphologies, analysis techniques, analytes, and analytical performances of electrochemical biosensors developed for medical diagnosis.

Sensitive electrochemical biosensor for rapid detection of sEV-miRNA based turbo-like localized catalytic hairpin assembly

Small extracellular vesicle-associated microRNAs (sEV-miRNAs) have emerged as critical biomarkers for cancer diagnosis, yet the rapid detection of these low-abundance molecules in clinical samples remains a formidable challenge. Herein, a simple turbo-like localized catalytic hairpin assembly (TL-CHA) was proposed for sEV-miR-1246 measurement. This electrochemical sensor achieves dual localization through the ingeniously use of AuNPs and DNA nanowires, which provides rich sites for CHA cascade amplification, significantly enhancing the effective reaction and amplify the detection response. Leveraging this innovative design, this biosensor demonstrated the ability to detect sEV-miRNA at concentrations as low as 5.24 aM in a time frame of 30 min. The precision of the measurements was validated through reverse transcription quantitative polymerase chain reaction. Furthermore, the sensor was used for analyzing plasma samples from gastric cancer patients yielded AUC values of 0.973 for all stages and 0.945 for early stages. This demonstrates the sensor's robust performance in both the staging diagnosis and early screening of gastric cancer. Therefore, this platform has great potential for the clinical cancer diagnosis.

Tracking epithelial-mesenchymal transition in breast cancer cells based on a multiplex electrochemical immunosensor

Epithelial-mesenchymal transition (EMT) promotes tumor cell infiltration and metastasis. Tracking the progression of EMT could potentially indicate early cancer metastasis. A key characteristic of EMT is the dynamic alteration in the molecular levels of E-cadherin and N-cadherin. Traditional assays have limited sensitivity and multiplexing capabilities, relying heavily on cell lysis. Here, we developed a multiplex electrochemical biosensor to concurrently track the upregulation of N-cadherin expression and reduction of E-cadherin in breast cancer cells undergoing EMT. Small-sized gold nanoparticles (Au NPs) tagged with redox probes (thionin or amino ferrocene) and bound to two types of antibodies were used as distinguishable signal tags. These tags specifically recognized E-cadherin and N-cadherin proteins on the tumor cell surface without cross-reactivity. The diphenylalanine dipeptide (FF)/chitosan (CS)/Au NPs (FF-CS@Au) composites with high surface area and good biocompatibility were used as the sensing platforms for efficiently fixing cells and recording the dynamic changes in electrochemical signals of surface proteins. The electrochemical immunosensor allowed for simultaneous monitoring of E- and N-cadherins on breast cancer cell surfaces in a single run, enabling tracking of the EMT dynamic process for up to 60 h. Furthermore, the electrochemical detection results are consistent with Western blot analysis, confirming the reliability of the methodology. This present work provides an effective, rapid, and low-cost approach for tracking the EMT process, as well as valuable insights into early tumor metastasis.

Immobilization-free and label-free electrochemical DNA biosensing based on target-stimulated release of redox reporter and its catalytic redox recycling

Herein, we demonstrate a simple, homogenous and label-free electrochemical biosensing system for sensitive nucleic acid detection based on target-responsive porous materials and nuclease-triggered target recycling amplification. The Fe(CN)63− reporter was firstly sealed into the pores of Fe3O4 nanoparticles by probe DNA. Target DNA recognition triggered the controllable release of Fe(CN)63− for the redox reaction with the electron mediator of methylene blue enriched in the dodecanethiol assembled electrode and thereby generating electrochemical signal. The exonuclease III (Exo III)-assisted target recycling and the catalytic redox recycling between Fe(CN)63− and methylene blue contributed for the enhanced signal response toward target recognition. The low detection limit toward target was obtained as 478 fM and 1.6 pM, respectively, by square wave voltammetry and cyclic voltammetry methods. It also possessed a well-discrimination ability toward mismatched strands and high tolerance to complex sample matrix. The coupling of bio-gated porous nanoparticles, nuclease-assisted target amplification and catalytic redox recycling afforded the sensing system with well-controllable signal responses, sensitive and selective DNA detection, and good stability, reusability and reproducibility. It thus opens a new avenue toward the development of simple but sensitive electrochemical biosensing platform.