Electrocatalytic Oxygen Reduction Research Articles

Biomass N/P co‐doped porous carbon plates for electrocatalytic oxygen reduction

AbstractNitrogen and phosphorus co‐doped porous carbon plate (NPCP) was prepared by simple pyrolysis carbonization and alkali activation of biomass duckweed NPCP displays the largest specific surface area (SSA) of 2023 m2 g−1, and is rich in pyridine N and P doping, which makes the metal‐free carbon have excellent electrocatalytic oxygen reduction performance. The best NPCP2 shows a half‐wave potential of 0.19 V vs. Ag/AgCl in alkaline electrolyte, and its activity is equivalent to that of commercial platinum carbon (Pt/C). In addition, it shows excellent methanol toxicity resistance and continuous catalytic stability. The experimental results show that the heteroatom doping method obtained by biomass hydroponics has great advantages and great application value in the catalytic field of porous carbon materials.

Periodic Defect Boundary-Mediated Activity of Electrocatalytic Oxygen Reduction Reactions of Fe-N-C Catalysts

Periodic Defect Boundary-Mediated Activity of Electrocatalytic Oxygen Reduction Reactions of Fe-N-C Catalysts

Periodic Defect Boundary-Mediated Activity of Electrocatalytic Oxygen Reduction Reactions of Fe-N-C Catalysts

Periodic Defect Boundary-Mediated Activity of Electrocatalytic Oxygen Reduction Reactions of Fe-N-C Catalysts

Boron carbon nitride as efficient oxygen reduction reaction support

The electrocatalytic oxygen reduction reaction (ORR) is crucial for energy conversion systems such as fuel cells and metal-air batteries. Boron carbon nitrogen (BCN) is a novel functional material with a high specific surface area, excellent corrosion resistance, and outstanding electrochemical stability. These properties make BCN an effective ORR catalyst and a promising support for metal catalysts. This study leveraged the strong interaction between BCN and metals to anchor platinum nanoparticles (Pt NPs) onto the BCN surface (Pt/BCN), significantly enhancing the durability of traditional Pt/C catalysts in ORR. The half-wave potential of Pt/BCN is 0.927 V, higher than Pt/XC-72R (0.857 V) and commercial Pt/C (0.879 V). Notably, after 10,000 durability test cycles, the mass activity (MA) of Pt/XC-72R and commercial Pt/C decreased by 67 % and 75 %, respectively. Even after 50,000 cycles, Pt/BCN exhibited only a 54 % decrease in MA. Experimental data and density functional theory calculations confirmed increased electron transfer from Pt to the BCN support, indicating a strong electronic metal-support interaction (EMSI) between Pt and BCN. This strong EMSI effectively anchored the Pt NPs, preventing migration and aggregation during the ORR process. Consequently, our research introduces a novel electrocatalyst support material with significant potential for ORR and broader applications.

Dimensional Upgrade Induced Enriched Active Sites and Intensified Intramolecular Electron Donor–Acceptor Interaction to Boost Oxygen Reduction Electrocatalysis

AbstractConjugated 2D covalent organic frameworks (2D‐COFs) have garnered interest as potential cost‐efficient noble‐metal‐free electrocatalysts, owing to their structural flexibility, well‐defined molecular architecture, high compatibility, and environmental sustainability. However, their suboptimal activity, primarily attributed to their low active site utilization and limited electron transfer ability, considerably impedes their implementation in real‐world electrocatalytic systems. Herein, the molecular dimensionality of a 2D‐COF containing tris‐triazine ring (2D‐Tr‐COF) is upgraded to generate its 3D counterpart (3D‐Tr‐COF), enabling a direct comparison between 2D‐ and 3D‐ COFs. These findings reveal that slightly altering the spatial structure in plane (from 2D to 3D) by substituting amine building blocks leads to significant variations in molecular architecture and performance for oxygen reduction reaction. The results indicate that 3D‐Tr‐COF with enlarged lattice spacing, more active species, and reduced conjugated degree, possesses enriched active sites. Moreover, the intensified intramolecular electron donor–acceptor interaction between the tris‐triazine ring and its neighboring imino linkage of 3D‐Tr‐COF optimizes the electronic/band structure and facilitates the charge transfer, resulting in enhanced intrinsic activity compared to 2D‐Tr‐COF. The extensively optimized 3D‐Tr‐COF demonstrates a half‐wave potential of 0.833 V, on par with the state‐of‐the‐art Pt/C. These findings offer valuable insights into dimension modulation strategies for COF‐based electrocatalyst designing.

Co-doped hollow nanospheres with low Pt loading for electrocatalytic oxygen reduction and zinc-air batteries

Preparing high-performance catalysts for oxygen reduction reaction (ORR) with low Pt loading is crucial to promote the development of clean energy storage devices such as metal air batteries. Herein, Co/N-HCMs support material with isolated Co atoms and hollow flower-like structure could be prepared by a self-sacrificing template strategy. Co/N-HCMs are then used to anchor Pt to obtain PtCo/N-HCMs catalyst with low Pt loading. Thanks to its improved specific surface area, hierarchical porous structure, and reinforced metal-support interactions, the obtained PtCo/N-HCMs deliver high onset potential of 0.99 V and half-wave potential of 0.82 V, and an excellent durability. When used as air cathode catalyst, PtCo/N-HCMs-based Zinc-air battery (ZAB) exhibits a power density of up to 202 mW cm−2, which is significantly better than ZAB assembled with commercial Pt/C. This study provides an effective strategy for preparing high-performance electrocatalysts with low precious metal content for use as the cathode of metal-air batteries.

Metal-support spin orders: Crucial effect on electrocatalytic oxygen reduction

Magnetic property (e.g. spin order) of support is of great importance in the rational design of heterogeneous catalysts. Herein, we have taken the Ni-supported ferromagnetic (FM) CrBr3 support (Nix/CrBr3) to thoroughly investigate the effect of spin-order on electrocatalytic oxygen reduction reaction (ORR) via spin-polarized density functional theory calculations. Specifically, Ni loading induces anti-FM coupling in Ni–Cr, leading to a transition from FM-to-ferrimagnetic (FIM) properties, while Ni–Ni metallic bonds create a robust FM direct exchange, benefiting the improvement of the phase transition temperature. Interestingly, with the increase in Ni loading, the easy magnetic axis changes from out-of-plane (2D-Heisenberg) to in-plane (2D-XY). The adsorption properties of Nix/CrBr3, involving O2 adsorption energy and configuration, are not governed by the d-band center but strongly correlate with magnetic anisotropy. It is noteworthy that the applied potential and electrolyte acidity triggers spin-order transition phenomena during the ORR and induces the catalytic pathway change from 4e− ORR to 2e− ORR with the excellent onset potential of 0.93 V/reversible hydrogen electrode, comparable to the existing most excellent noble-metal catalysts. Generally, these findings offer new avenues to understand and design heterogeneous catalysts with magnetic support.

Hierarchical porous Mn-Nx-doped carbons with ultrahigh surface area for effective electrocatalytic oxygen reduction

A MnCl2-ZnCl2 molten salt pyrolysis combining with silica template strategy was developed to produce hierarchical porous N-doped carbons with ultrahigh surface area of 3006 m2/g, employing phenol formaldehyde resin@silica as the precursors. The resultant Mn-Nx-doped carbons showcased remarkable electrocatalytic performance for oxygen reduction reaction (ORR) in 0.1 M KOH, attaining a notable ORR half-wave potential of 0.84 VRHE. It also indicated higher open circuit and power density in home-made zinc-air batteries. This research offers a distinctive molten salt pyrolysis and template combining approach to generate ultrahigh-surface-area carbons with advanced electrocatalytic capabilities.

Cyanogel-Induced Facile Synthesis of Palladium Hydride for Electrocatalytic Oxygen Reduction.

Palladium hydride (PdHx) is one of the well-known electrocatalytic materials, yet its synthesis is still a challenge through an energy-efficient and straightforward method. Herein, we propose a new and facile cyanogel-assisted synthesis strategy for the preparation of PdH0.649 at a mild environment with NaBH4 as the hydrogen source. Unlike traditional inorganic Pd precursors, the unique Pd-CN-Pd bridge in Pdx[Pd(CN)4]y ⋅ aH2O cyanogel offers more favourable spatial sites for insertion of H atoms. The characteristic three-dimensional backbone of cyanogel also acts as a support scaffold resulting in the interconnected network structure of PdH0.649. Due to the incorporation of H atoms and interconnected network structure, the PdH0.649 achieves a high half-wave potential of 0.932 V, a high onset potential of 1.062 V, and a low activation energy, as well as a long-term lifetime for oxygen reduction reaction. Theoretical calculation demonstrates a downshift of the d-band centre of Pd in PdH0.649 owing to the dominant Pd-H incorporation that weakens the binding energies of the *OH intermediate species. Zn-air batteries (ZAB) based on PdH0.649 exhibits high power density, competitive open circuit voltage, and good stability, exceeding that of commercial Pt black. This work not only opens up a new avenue for the development of high-efficiency Pt-free catalysts but also provides an original approach and insight into the synthesis of PdHx.

Fe-N co-doped carbon nanofibers with Fe3C decoration for water activation induced oxygen reduction reaction

ABSTRACT Proton activity at the electrified interface is central to the kinetics of proton-coupled electron transfer (PCET) reactions in electrocatalytic oxygen reduction reaction (ORR). Here, we construct an efficient Fe3C water activation site in Fe-N co-doped carbon nanofibers (Fe3C-Fe1/CNT) using an electrospinning-pyrolysis-etching strategy to improve interfacial hydrogen bonding interactions with oxygen intermediates during ORR. In situ Fourier transform infrared spectroscopy and density functional theory studies identified delocalized electrons as key to water activation kinetics. Specifically, the strong electronic perturbation of the Fe–N4 sites by Fe3C disrupts the symmetric electron density distribution, allowing more free electrons to activate the dissociation of interfacial water, thereby promoting hydrogen bond formation. This process ultimately controls the PCET kinetics for enhanced ORR. The Fe3C-Fe1/CNT catalyst demonstrates a half-wave potential of 0.83 V in acidic media and 0.91 V in alkaline media, along with strong performance in H2-O2 fuel cells and Al-air batteries.

A Janus dual-atom catalyst for electrocatalytic oxygen reduction and evolution

A Janus dual-atom catalyst for electrocatalytic oxygen reduction and evolution

Magnetic Order Transition of a Two-Dimensional Square-Lattice Electrocatalyst Assembled by Fe-N4 Units: Crucial Role on Oxygen Reduction.

Herein, we theoretically investigate the effect of magnetic orders on electrocatalytic oxygen reduction reaction (ORR) properties on the Fe-N4 site-embedded two-dimensional (2D) covalent organic framework (Fe-N4@COF-C3N2) under realistic environments. The Fe-N4@COF-C3N2 shows a 2D square-lattice (sql) topology with three magnetic order states: one ferromagnetic state (FM) and two antiferromagnetic states (AFM1 and AFM2). Specially, the electrocatalyst in the AFM2 state shows a remarkable onset potential of 0.80 V/reversible hydrogen electrode (RHE) at pH 1, superior to the existing most excellent noble-metal catalysts. Thermodynamically, the onset potential for the 4e- ORR is 0.64 V/RHE at pH 1, with a magnetic state transition process of FM → AFM1 → FM → FM → FM, while at pH 13, the onset potential for the 4e- ORR is 0.54 V/RHE, with the magnetic transition process of FM → FM → AFM1 → FM → FM. Generally, this finding will provide new avenues to rationally design the Fe-N4 electrocatalyst.

Linker Mediated Electronic-State Manipulation of Conjugated Organic Polymers Enabling Highly Efficient Oxygen Reduction.

Conjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure-performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc-CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc-CPs) are judiciously crafted via in situ assembling square-planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde-based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5-thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene-2,5-dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc-CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron-withdrawing linkers (i.e., TDA and bTDA) drives the delocalization of Co d-orbital electrons, thereby downshifting the Co d-band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR-relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular-level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms.

Linker Mediated Electronic‐State Manipulation of Conjugated Organic Polymers Enabling Highly Efficient Oxygen Reduction

AbstractConjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure‐performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc‐CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc‐CPs) are judiciously crafted via in situ assembling square‐planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde‐based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5‐thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene‐2,5‐dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc‐CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron‐withdrawing linkers (i.e., TDA and bTDA) drives the delocalization of Co d‐orbital electrons, thereby downshifting the Co d‐band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR‐relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular‐level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms.

Self‐Adjustment of Intrinsic Reaction Intermediate on Atomically Dispersed Co2–N6 Binuclear Sites Achieving Boosted Electrocatalytic Oxygen Reduction Performance

AbstractIsolated dual‐atom catalysts (DACs) have sparked enormous research enthusiasm in new energy community due to their great potentials to substitute the state‐of‐the‐art Pt‐based catalysts. Nevertheless, explicitly unraveling the underlying catalytic mechanisms is of critical significance for performance enhancement, yet remains a huge challenge. Herein, the study reports a reliable hard template‐mediated strategy to accomplish the construction of atomically isolated binuclear Co2‐N6 sites stabilized by ultrathin hollow carbon nanospheres (abbreviated as Co2‐DAs@CHNSs). Systematic spectroscopy characterization and theoretic calculations uncover that the Co2‐N6 sites follow a self‐adjusting mechanism caused by the intrinsic OH intermediate. The involvement of the ‐OH energy‐level modifier is found to induce the electron redistribution and alternation of antibonding orbital fillings for the generated Co2‐N6‐OH site, leading to reduced potential‐determining step (PDS) energy barrier, and thus boosted intrinsic activity. Consequently, the well‐managed Co2‐DAs@CHNSs afford outstanding oxygen reduction reaction (ORR) activity with a half‐wave potential of 0.87 V in alkaline electrolyte, overmatching the Pt benchmark. Furthermore, the Co2‐DAs@CHNSs‐assembled aqueous and all‐solid‐state rechargeable zinc–air batteries (ZABs) demonstrate high power density, large specific capacity, and robust stability. The findings offer an innovative avenue to rationally manipulate the electronic structures of active sites for DACs via a powerful self‐ligand modification strategy.

Highly Dispersed Mn-Doped Ceria Supported on N-Doped Carbon Nanotubes for Enhanced Oxygen Reduction Reaction.

The weak adsorption of oxygen on transition metal oxide catalysts limits the improvement of their electrocatalytic oxygen reduction reaction (ORR) performance. Herein, a dopamine-assisted method is developed to prepare Mn-doped ceria supported on nitrogen-doped carbon nanotubes (Mn-Ce-NCNTs). The morphology, dispersion of Mn-doped ceria, composition, and oxygen vacancies of the as-prepared catalysts were analyzed using various technologies. The results show that Mn-doped ceria was formed and highly dispersed on NCNTs, on which oxygen vacancies are abundant. The as-prepared Mn-Ce-NCNTs exhibit a high ORR performance, on which the average electron transfer number is 3.86 and the current density is 24.4% higher than that of commercial 20 wt % Pt/C. The peak power density of Mn-Ce-NCNTs is 68.1 mW cm-2 at the current density of 138.9 mA cm-2 for a Zn-air battery, which is close to that of 20 wt % Pt/C (69.4 mW cm-2 at 106.1 mA cm-2). Density functional theory (DFT) calculations show that the oxygen vacancy formation energies of Mn-doped CeO2(111) and pure CeO2(111) are -0.55 and 2.14 eV, respectively. Meanwhile, compared with undoped CeO2(111) (-0.02 eV), Mn-doped CeO2(111) easily adsorbs oxygen with the oxygen adsorption energy of only -0.68 eV. This work provides insights into the synergetic effect of Mn-doped ceria for facilitating oxygen adsorption and enhancing ORR performance.

N-doped carbon nanotube arrays Encapsuled with cobalt‑nickel alloy as superior free-standing electrodes for ultrahigh-rate hydrogen peroxide production

Electrocatalytic oxygen reduction via the two-electron pathway (2e−-ORR) is an environmentally friendly and promising route for hydrogen peroxide (H2O2) production. Carbon-based catalysts with transition metal species have been widely investigated due to their high tunability. However, the H2O2 production performance of such catalysts is still far from the requirement of practical applications, owing to their contradiction between durability and ORR activity/selectivity. In this work, metal alloy is encapsulated within the free-standing N-doped carbon nanotube arrays, named NiCo-CNTs-x (x represents the duration of the cation substitution process in hours), to precisely regulate the activity and selectivity of nitrogen sites on the surface of the carbon layer, meanwhile hindering the dissolution of alloy inside the CNTs, thus realizing long-term stability and high-activity catalysis for 2e−-ORR. Therefore, the NiCo-CNTs-30 demonstrates high activity (onset potential around 0.7 V) and selectivity (greater than 85% within the range of 0–0.8 V), and delivers a high yield of 11.7 mg L−1 h−1 with no current decay or structural damage within 24 h, showcasing its exceptional long-term stability. The catalyst can also effectively degrade organic dyes, making it highly promising for industrial applications.

Electron Transfer from Encapsulated Fe3C to the Outermost N‐Doped Carbon Layer for Superior ORR

AbstractEncapsulating Fe3C in carbon layers has emerged as an innovative strategy for protecting Fe3C while preserving its high oxygen reduction activity. However, fundamental questions persist regarding the active sites of encapsulated Fe3C due to the restricted accessibility of oxygen molecules to the metal sites. Herein, the intrinsic electron transfer mechanisms of Fe3C nanoparticles encapsulated in N‐doped carbon materials are unveiled for oxygen reduction electrocatalysis. The precision‐structured C1N1 material is used to synthesize N‐doped carbons with encapsulated Fe3C, significantly enhancing catalytic activity (EONSET = 0.98 V) and achieving near‐100% operational stability. In anion‐exchange membrane fuel cells, an excellent peak power density of 830 mW cm−2 is reached at 60 °C. The experimental and computational results revealed that the presence of Fe3C cores dynamically triggers electron transfer to the outermost carbon layer. This phenomenon amplifies the oxygen reduction reaction performance at N sites, contributing significantly to the observed catalytic enhancement.

Surface state modulation of carbon dots for efficient generation of hydrogen peroxide

Electrocatalytic dual electron oxygen reduction to hydrogen peroxide (2e ORR) is considered a special and sustainable method for on-site continuous production of hydrogen peroxide. Oxygen doped carbon based materials have demonstrated their superiority in the generation of H2O2. However, there is still a lack of direct experimental evidence to determine the true active site on complex carbon surfaces. In this work, we introduce only carboxyl functional groups on the surface of carbon dots by a mild and simple synthesis method to study the specific COOH functional groups on the generation of H2O2. The H2O2 selectivity was correlated with the contents of COOH functional groups. In alkaline environments, the citric acid modified CDs (CA-OCDs) own excellent catalytic ability for 2e ORR, showing a maximum starting potential of 0.829 V (vs. RHE) and a high selectivity of 89.7 % over a wide potential range of 0.2–0.7 V (vs. RHE). In actual H2O2 production, the Faraday efficiency (FE) of CA-OCDs can be up to 97 %, and the yield achieves 838 mmol gcatalyst−1 h−1. This work provides an effective and simple strategy for designing efficient carbon-based catalysts for sustainable H2O2 electrosynthesis.

Steering sp-Carbon Content in Graphdiynes for Enhanced Two-Electron Oxygen Reduction to Hydrogen Peroxide.

Compared to sp2-hybridized graphene, graphdiynes (GDYs) composed of sp and sp2 carbon are highly promising as efficient catalysts for electrocatalytic oxygen reduction into oxygen peroxide because of the high catalytic reactivity of the electron-rich sp-carbon atoms. The desired catalytic capacity of GDY, such as catalytic selectivity and efficiency, can theoretically be achieved by strategically steering the sp-carbon contents or the topological arrangement of the acetylenic linkages and aromatic bonds. Herein, we successfully tuned the electrocatalytic activity of GDYs by regulating the sp-to-sp2 carbon ratios with different organic monomer precursors. As the active sp-carbon atoms possess electron-sufficient π orbitals, they can donate electrons to the lowest unoccupied molecular orbital (LUMO) orbitals of O2 molecules and initiate subsequent O2 reduction, GDY with the high sp-carbon content of 50 at % exhibits excellent capability of catalyzing O2 reduction into H2O2. It demonstrates exceptional H2O2 selectivity of over 95.0 % and impressive performance in practical H2O2 production, Faraday efficiency (FE) exceeding 99.0 %, and a yield of 83.3 nmol s-1 cm-2. Our work holds significant importance in effectively steering the inherent properties of GDYs by purposefully adjusting the sp-to-sp2 carbon ratio and highlights their immense potential for research and applications in catalysis and other fields.