Electric Polarization Research Articles

Janus tetragonal Mn2BN monolayer: A 2D polar half-metal with coexistent ferroelectricity and magnetism

The integration of ferroelectricity, ferromagnetism, and half-metallicity in two-dimensional (2D) materials is pivotal for advancing spintronic device technologies. However, the progress in identifying such materials is limited, and we here propose a compelling approach by constructing asymmetry structures (Janus) based on known 2D magnets, namely, the Janus tetragonal Mn2BN monolayer as a promising polar half-metal. The asymmetric arrangement of B and N atoms, coupled with comparable atomic sizes and evident electronegativity, ensures structural stability and inherent polarization, while the dominance of Mn atoms governs magnetism. The robust ferromagnetic order stems from a strong super-exchange interaction, evident in the significant hybridization between Mn d and B/N p orbitals. The Mn2BN monolayer exhibits a wide spin bandgap (1.09 eV), a substantial electric polarization (9.15 μC cm−2), and a sizable magnetic anisotropic energy (238 μeV/Mn) and maintains stable ferromagnetic order to ∼800 K. These properties position it as a promising candidate for next-generation multifunctional devices in spintronics.

Broadband high-contrast-grating-type waveplates for the terahertz range

The high-contrast-grating waveplates utilizing high contrast between silicon and air refractive indexes were developed in order to perform as a quarter wave and a half wave plate in the selected THz frequency range. The waveplates possessed anti-reflective properties due to the specific inclination of the walls both in parallel and in perpendicular direction to grating axis, efficiently suppressing the reflection losses caused by air-dielectric interface for both transverse magnetic and transverse electric polarizations. Moreover, significant reduction of the transmittance gap was achieved between both polarizations while mitigating overall Fabry-Perot effect. Validation of the concepts was carried out by measuring transmission amplitude and phase spectra of the fabricated samples in a broadband of THz time-domain spectroscopy and vector-network-analysis systems considering also some real applications.

Ultrasound-triggerennd piezocatalytic conductive Guar gum/PEDOT: PSS/BTO composite hydrogels for bacterial-infected skin wound healing

Open skin wounds are susceptible to infections by multidrug-resistant bacteria, which can lead to delayed wound healing or worsening of symptoms. Therefore, there is an urgent need to develop a comprehensive strategy that addresses bacterial infections while simultaneously promoting wound healing for optimal clinical outcomes. In this study, we aimed to combine the benefits of antibacterial piezoelectric catalysis action and controlled electrical stimulation to promote skin tissue repair. Initially, piezoelectric catalytic BaTiO3(BTO) nanoparticles were coated with polydopamine (PDA) to improve the interface compatibility between inorganic and organic phase. Subsequently, a novel conductive composite hydrogel termed PPGSCH was synthesized by doping PDA@BTO into poly (3, 4-ethylenedioxythiophene) -poly (styrene sulfonate) (PEDOT: PSS) hydrogel. Traditional dye degradation experiments and EPR tests found that PDA@BTO nanoparticles exhibited superior piezoelectric catalytic efficiency compared with the pristine BTO. Rheological tests and electrical conductivity tests demonstrated better electrical adaptability and mechanical stability of PPGSCH. Remarkably, under the synergism of piezoelectricity and electric polarization induced by ultrasound (US), the antibacterial rate of PPGSCH exceeded 90% in vitro. Furthermore, when subjected to 0.5 W/cm2 US irradiation, it can generate moderate levels of reactive oxygen (ROS) and micro current, promoting the proliferation and migration of mouse fibroblasts. Animal experiments on infected skin wounds in mice showed that PPGSCH could reduce inflammation, accelerate angiogenesis, and ultimately expedite the infected wound healing. This work opens up new possibilities for enhancing the repair of infected skin wounds.

Nonlinear analysis of unimorph piezoelectric nanobeam with a variable cross-section and flexoelectric effect

An analytical method is presented to investigate the nonlinear electromechanical coupling response of an unimorph piezoelectric nanobeam with a variable cross-section, taking into account the flexoelectric effect. Considering the geometric nonlinearity, strongly nonlinear governing equation with variable coefficients is derived using the energy variation method and solved by the differential quadrature method. The nonlinear effects of geometric nonlinearity, electromechanical loadings, flexoelectric effect and width ratio on the electromechanical coupling response are analyzed in detail. The results show that under different loadings, the flexoelectric parameter and width ratio have distinct effects on the electromechanical response of the piezoelectric variable cross-section nanobeam. When the mechanical loads are applied on the nanobeam, a larger flexoelelctric parameter results in a greater bending deflection and higher output of electric field and polarization. The width ratio of variable cross-section can also influence the bending deflection, but its impact on the output of electric field and polarization is limited. When the applied voltage loads are applied to the nanobeam, the bending direction can be controlled by the applied voltage, flexoelectric parameter or width ratio. Due to the strongly nonlinear governing equation, these results in this study differ significantly from those of piezoelectric nanobeam with uniform cross-section. This study can contribute to the understanding of electromechanical coupling response in piezoelectric variable cross-section nanobeam with flexoelectric effect. Additionally, it can be helpful in guiding the structure optimization of piezoelectric nanodevices.

Two-Dimensional Os2Se3 Nanosheet: A Ferroelectric Metal with Room-Temperature Ferromagnetism.

Two-dimensional (2D) ferroelectric metals (FEMs) possess intriguing characteristics, such as unconventional superconductivity and the nonlinear anomalous Hall effect. However, their occurrence is exceedingly rare due to mutual repulsion between ferroelectricity and metallicity. In addition, further incorporating other features like ferromagnetism into FEMs to enhance their functionalities poses a significantly greater challenge. Here, via first-principles calculations, we demonstrate a case of an FEM that features a coexistence of room-temperature ferromagnetism, ferroelectricity, and metallicity in a thermodynamically stable 2D Os2Se3. It presents a vertical electric polarization of 3.00 pC/m that exceeds those of most FEMs and a moderate polarization switching barrier of 0.22 eV per formula unit. Moreover, 2D Os2Se3 exhibits robust ferromagnetism (Curie temperature TC ≈ 527 K) and a sizable magnetic anisotropy energy (-30.87 meV per formula unit). Furthermore, highly magnetization-dependent electrical conductivity is revealed, indicative of strong magnetoelectric coupling. Berry curvature calculation suggests that the FEM might exhibit nontrivial band topology.

Ultrathin tunable UWB metasurface absorber design by exciting plasmonic modes in bilayer graphene stack

This work presents a graphene-based ultra-wideband (UWB) tunable metasurface absorber (MSA) consisting of top patterned graphene (Gpat) and bottom continuous graphene (Gcont) separated by a 2 μm thick silicon dioxide (SiO2) substrate. An absorptivity (Af) ≥ 90 % from 0.1 to 14 THz (fractional bandwidth = 197.2 %) has been achieved in three steps: (i) Fabry-Perot cavity mode has been generated near 0.1 THz using bilayer graphene stack, (ii) multiple plasmonic modes have been excited by engraving resonant slots on Gpat and (iii) plasmonic coupling strength has been enhanced between Gpat and Gcont by adjusting SiO2 substrate's thickness. The excited plasmonic modes show high absorption due to the generation of localized surface plasmon polariton (LSPP) waves. The fourfold symmetry in design nullifies the effect of the polarization angle (ϕ). Interestingly, the orthogonal modes' excitation helps to achieve similar Af response under both transverse electric and transverse magnetic polarizations for incidence angle (θ) up to 60°. Further, an effective DC biasing mechanism has been devised to tune the chemical potential (μc) of the interconnected Gcont, which ensures common DC bias between unit cells. A DC voltage from 0 to 10.2 V can vary μc (Bottom) from 0 to 1 eV to provide frequency tunability.

Enhancements of electric field and afterglow of non-equilibrium plasma by Pb(ZrxTi1−x)O3 ferroelectric electrode

Manipulating surface charge, electric field, and plasma afterglow in a non-equilibrium plasma is critical to control plasma-surface interaction for plasma catalysis and manufacturing. Here, we show enhancements of surface charge, electric field during breakdown, and afterglow by ferroelectric barrier discharge. The results show that the ferroelectrics manifest spontaneous electric polarization to increase the surface charge by two orders of magnitude compared to discharge with an alumina barrier. Time-resolved in-situ electric field measurements reveal that the fast polarization of ferroelectrics enhances the electric field during the breakdown in streamer discharge and doubles the electric field compared to the dielectric barrier discharge. Moreover, due to the existence of surface charge, the ferroelectric electrode extends the afterglow time and makes discharge sustained longer when alternating the external electric field polarity. The present results show that ferroelectric barrier discharge offers a promising technique to tune plasma properties for efficient plasma catalysis and electrified manufacturing.

Terahertz electric-field-driven dynamical multiferroicity in SrTiO3

The emergence of collective order in matter is among the most fundamental and intriguing phenomena in physics. In recent years, the dynamical control and creation of novel ordered states of matter not accessible in thermodynamic equilibrium is receiving much attention1–6. The theoretical concept of dynamical multiferroicity has been introduced to describe the emergence of magnetization due to time-dependent electric polarization in non-ferromagnetic materials7,8. In simple terms, the coherent rotating motion of the ions in a crystal induces a magnetic moment along the axis of rotation. Here we provide experimental evidence of room-temperature magnetization in the archetypal paraelectric perovskite SrTiO3 due to this mechanism. We resonantly drive the infrared-active soft phonon mode with an intense circularly polarized terahertz electric field and detect the time-resolved magneto-optical Kerr effect. A simple model, which includes two coupled nonlinear oscillators whose forces and couplings are derived with ab initio calculations using self-consistent phonon theory at a finite temperature9, reproduces qualitatively our experimental observations. A quantitatively correct magnitude was obtained for the effect by also considering the phonon analogue of the reciprocal of the Einstein–de Haas effect, which is also called the Barnett effect, in which the total angular momentum from the phonon order is transferred to the electronic one. Our findings show a new path for the control of magnetism, for example, for ultrafast magnetic switches, by coherently controlling the lattice vibrations with light.

Synthesis, crystal structure, DFT calculations, NBO, Fukui function, NCI-RDG, Hirshfeld surface analysis, NLO properties and molecular docking analysis on (E)-N'-(3-methoxybenzylidene)-2-(quinolin-8-yloxy) acetohydrazide

In this study, we present the synthesis and characterization of a novel organic compound, (E)-N'-(3-methoxybenzylidene)-2-(quinolin-8-yloxy) acetohydrazide. Our characterization includes single crystal X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and UV–visible spectroscopy. We also conducted Hirshfeld surface (HS) analysis to investigate intermolecular interactions. The compound crystallizes in the triclinic system with space group P−1. We employed density functional theory (DFT) with the B3LYP function and the 6–311 G (d, p) basis set to calculate its electronic properties. Additionally, we explored its nonlinear optical (NLO) behavior, determining the electric dipole moment (μ), polarizability (α), and hyperpolarizability (β), second-order hyperpolarizabilities (γ) using the same basis set. To evaluate the NLO properties of MBQA, we conducted frontier molecular orbitals (FMO) analysis, examined HOMO-LUMO energies, determined the energy band gap, studied the density of states (DOS), and assessed global chemical reactivity descriptors. We also performed a molecular electrostatic potential (MEP) simulation to identify optimal sites for both electrophilic and nucleophilic attacks. Our analysis further included a reduced density gradient (RDG) analysis to investigate various types of intermolecular interactions in MBQA, such as repulsive, attractive, and Van der Waals interactions while also distinguishing between strong and weak interactions. To understand the molecular stability and interactions, we conducted natural bond orbital (NBO) analysis, which provided insights into hyperconjugative interactions, charge delocalization and electron density ED among the molecular components. Finally, we assessed the biological activity of the MBQA molecule by predicting its potential pharmacological activities using the prediction of activity spectra for substances (PASS) and conducting molecular docking analyses. This comprehensive study provides valuable insights into the structural, electronic, and biological properties of (E)-N'-(3-methoxybenzylidene)-2-(quinolin-8-yloxy) acetohydrazide (MBQA).

Poling induced changes in polarization domain structure of polymer ferroelectrics for application in organic thin film transistors

While electrical poling of organic ferroelectrics has been shown to improve device properties, there are challenges in visualizing accompanying structural changes. We observe poling induced changes in ferroelectric domains by applying differential phase contrast (DPC) imaging in the scanning transmission electron microscope, a method that has been used to observe spatial distributions of electromagnetic fields at the atomic scale. In this work, we obtain DPC images from unpoled and electrically poled polyvinylidene fluoride trifluorethylene films and compare their performance in polymer thin film transistors. The vertically poled films show uniform domains throughout the bulk compared to the unpoled film with a significantly higher magnitude of the overall polarization. Thin film transistors comprising a donor–acceptor copolymer as the active semiconductor layer show improved performance with the vertically poled ferroelectric dielectric film compared with the unpoled ferroelectric dielectric film. A poling field of 80–100 MV/m for the dielectric layer yields the best performing transistors; higher than 100 MV/m is seen to degrade the transistor performance. The results are consistent with a reduction in deleterious charge carrier scattering from ferroelectric domain boundaries or interfacial dipoles arising from electrical poling.

Thermally tunable nonreciprocal radiation in lithography-free vanadium dioxide-dielectric-Weyl semimetal stack

Nonreciprocal thermal radiation (NTR) holds great promise in revolutionizing energy harvesting and conversion process, has become a hot topic of various research fields ranging from renewable energy, molecular sensing, to thermal circuitry and camouflage. Despite intensive effort into enhance the nonreciprocal response, static manipulation of NTR has limited the potential application, dynamic control of thermal radiation is highly demanded. Here, by using a multilayered stack comprised of vanadium dioxide (VO2) thin film, germanium (Ge) spacer layer, Weyl semimetal (WSM) layer terminated by molybdenum (Mo) substrate, we propose a thermally tunable nonreciprocal emitter. The effects of the incident angle (θi), azimuthal angle (ϕi), and the thickness of each layer for the VO2/Ge/WSM stack on the characteristics of thermal radiation have been discussed thoroughly. Dominant peaks and dips of nonreciprocity have been obtained with an incident angle of θi=60° and azimuthal angle of ϕi=0°. A switching effect between the near-unity nonreciprocity (”ON”) and zero nonreciprocity (”OFF”) states are induced when the temperature increases from 20 °C to 68 °C. It is shown that the magnitude and sign of the nonreciprocity can be managed simultaneously for transverse electric (s-) and transverse magnetic (p-) polarizations. The proposed structure shows good near-unity nonreciprocity stability in a wide range of θi and ϕi. This structurally lithography-free nonreciprocal thermal emitter not only provides the ability to tune nonreciprocal radiative properties, but also leads to the possible development of power scavenging and conversion devices.

First study of quantitative relationship between electric polarization and electromagnetic interference (EMI) shielding effectiveness of CFRP

This study investigates the electric polarization, including direct current (DC) and alternating current (AC), and electromagnetic interference (EMI) shielding capabilities within the microwave range (2.5–3.9 GHz) of cross-ply continuous carbon fiber-reinforced polymer (CFRP) composites, constructed by stacking prepreg composites. The DC conductivity of CFRP was evaluated using a multimeter, while the AC relative permittivity was measured with electronic test equipment (LCR meter). To describe the relationship between shielding effectiveness and polarization behavior, the EMI shielding of CFRP was assessed using the waveguide method, presenting a quantitative description of this relationship for the first time. Results indicate a decrease in DC conductivity with increasing specimen thickness due to increasing defects. Conversely, AC permittivity increases with specimen thickness, attributed to a rise in charged carriers and associated carrier-atom interactions. Skin depth δ, at a given thickness, follows a trend of initial decrease and subsequent increase with rising frequency; at a given frequency, it increases with decreasing specimen thickness. The interaction between CFRP and radiation is primarily reflective, with the reflection coefficient being much higher than the absorption coefficient across the frequency range, escalating with specimen thickness. Shielding effectiveness (SET) and absorption loss (SEA) display an initial increase followed by a decrease with rising frequency, whereas reflection loss (SER) sees a slight increase. For the smallest thickness, SEA per unit thickness exceeds 3120 dB/m and 7960 dB/m using specimen and carbon thickness, respectively. The absorption loss predominantly arises from the interaction of the electric field with electric dipoles formed by carrier-atom interaction at defects.

Frequency-Dependent Microelectrophoresis Study of Colloids with Tunable Surface Charge.

Nonaqueous poly(methyl methacrylate) (PMMA) colloidal suspensions in a solvent that is simultaneously matched in both density and refractive index have been important for real-space studies of colloidal self-assembly, but their complex electrostatic character remains largely unexplored. Electrophoresis is a powerful tool for determining the surface potential and charge of the colloidal suspension; however, because of refractive index matching, standard electrophoresis measurements are not feasible. We carry out microscope-based microelectrophoresis measurements on PMMA colloids in cyclohexyl bromide and cis-trans decalin to measure particle charge as a function of salt concentration in both DC and frequency-variable AC fields. The colloid charge depends on salt concentration and reverses sign near 0.35 μM, providing evidence that solution ions are actively modifying the colloid surface. The frequency dependence of the electrophoretic mobility yields the characteristic time scale for electric double-layer polarization and provides intriguing evidence for Manning condensation and polyion formation.

Statistical field theory of polarizable polymer chains with nonlocal dipolar interactions.

The electromechanical response of polymeric soft matter to applied electric fields is of fundamental scientific interest as well as relevant to technologies for sensing and actuation. Several existing theoretical and numerical approaches for polarizable polymers subject to a combined applied electric field and stretch are based on discrete monomer models. In these models, accounting for the interactions between the induced dipoles on monomers is challenging due to the nonlocality of these interactions. On the other hand, the framework of statistical field theory provides a continuous description of polymer chains that potentially enables a tractable way to account for these interactions. However, prior formulations using this framework have been restricted to the case of weak anisotropy of the monomer polarizability. This paper formulates a general approach based in the framework of statistical field theory to account for the nonlocal nature of the dipolar interactions without any restrictions on the anisotropy or nonlinearity of the polarizability of the monomer. The approach is based on three key elements: (1) the statistical field theory framework, in which the discrete monomers are regularized to a continuous dipole distribution, (2) a replacement of the nonlocal dipole-dipole interactions by the local electrostatics partial differential equationwith the continuous dipole distribution as the forcing, and (3) the use of a completely general relation between the polarization and the local electric field. Rather than treat the dipole-dipole interactions directly, the continuous description in the field theory enables the computationally tractable nonlocal-to-local transformation. Further, it enables the use of a realistic statistical-mechanical ensemble wherein the average far-field applied electric field is prescribed, rather than prescribing the applied field at every point in the polymer domain. The model is applied, using the finite element method, to study the electromechanical response of a polymer chain in the ensemble with fixed far-field applied electric field and fixed chain stretch. The nonlocal dipolar interactions are found to increase, over the case where dipole-dipole interactions are neglected, the magnitudes of the polarization and electric field by orders of magnitude as well as significantly change their spatial distributions. Next, the effect of the relative orientation between the applied field and the chain on the local electric field and polarization is studied. The model predicts that the elastic response of the polymer chain is linear, consistent with the Gaussian approximation, and largely unchanged by the orientation of the applied electric field, though the polarization and local electric field distributions are significantly impacted.

Enhanced deep ultraviolet light emission from AlGaN based nanowire with bowtie antenna array

The performance of conventional AlGaN based deep ultraviolet nanostructure has been hindered by low light emission efficiency. In this study, we demonstrate that the integration of a plasmonic aluminum (Al) bowtie antenna array with a high AlN content AlGaN based nanowire can potentially achieve a 42% and 45% enhancement in light emission at 275 nm under transverse electric (TE) and transverse magnetic (TM) polarization excitation, respectively. This enhancement is realized by carefully optimizing the nanowire diameter, as well as the size and position of the Al bowtie antenna array. The optimized dimensions of the nanowire facilitate light emission enhancement at 275 nm through dielectric resonance. Moreover, the integrated nanowire/antenna array system further increases light emission efficiency by exploiting local surface plasmon resonances. This integrated system holds promise for designing nano-photonic devices with precisely controlled responses.

Vibrational response of a sandwich microplate considering the impact of flexoelectricity and based on a novel porous-FGM formulation

Flexoelectricity indicates a unique characteristic of insulators and dielectric materials that results in electrical polarization induction in response to the non-uniform strain gradient. The impact of this property is bolder on the microscale and nanoscale rather than the macroscale. This article is conducted to derive the governing equations of motion for a flexoelectric-multilayer structure and evaluate its vibrational behavior in response to various variable variations. The model includes a functionally graded (FG) porous core which is confined between two flexoelectricity-based face sheets at both sides and a Vlasov type of foundation. To gain the governing equations, the new type of power law for porous material beside Hamilton’s principle (HP) and modified couple stress theory (MCST) is implemented. Capturing the effects of length scale parameter, different materials, aspect and thickness ratios, porosity index, foundation parameter and boundary conditions (B.C.s) on the normalized natural frequency (NNF) of such a multilayer model based on the novel FG porous material formulation serve as the main novelty of this article. According to the results, it is revealed that the lateral ratio enhancement causes NNF and stiffness reduction in the model. Furthermore, among all considered B.C.s, simply support (SSSS) and clamped support (CCCC) refer to the lowest and the highest NNF respectively. The content of the recent article serves as a good source to provide a better understanding of the vibrational response of high stiffness-to-weight ratio structures to different variable variations.

Material extrusion 3D printing of large-scale SiC honeycomb metastructure for ultra-broadband and high temperature electromagnetic wave absorption

Electromagnetic (EM) wave absorbing materials have been widely used in various equipment to reduce the interference caused by EM waves. However, current EM wave absorbing materials are limited by narrow absorption bandwidth under high temperatures due to a lack of structural design. Herein, SiC ceramic and large-scale SiC honeycomb metastructure were monolithically fabricated by material extrusion 3D printing. The real permittivity and imaginary permittivity of as-obtained SiC ceramic approached 10 and 2.3 within the frequency of 2–18 GHz. After optimized structure design, the as-obtained SiC honeycomb metastructure exhibited broadband EM performance of −10 dB effective bandwidth from 4.85 to 39.49 GHz (34.64 GHz) when the incident angle was 60° at room temperature. Moreover, the as-obtained SiC honeycomb structure had a stable broadband −10 dB effective bandwidth of above 35 GHz when the incident angle is 60° even after in-situ 1000 °C and ex-situ 1600 °C erosion in the air atmosphere. Broadband EM wave absorption under oblique incident wave was also achieved from 30° to 60° both in transverse electric (TE) polarization and transverse magnetic (TM) polarization. This novel strategy unravels the potential of additive manufacturing of high-performance EM wave absorbers for high temperature environment applications.

An enhanced strain response in micrometer-thick BNT-ST thin films

Lead-free Bi0.5Na0.5TiO3-SrTiO3 (BNT-ST) thin films with various thicknesses were deposited on the Pt(111)/Ti/SiO2/Si(100) substrates employing a sol-gel technique with a two-step annealing process. Despite the variations in thickness, the films exhibited a consistent polycrystalline structure, evidenced by identical diffraction peaks, albeit with differences in intensity. An imprint became evident in micro-thick films, increasing with film thickness. Also, the emergence of self-polarization was observed in thicker films detected by piezoresponse force microscopy. Noteworthy is the pronounced influence of film thickness on strain response, with the 1.38 μm-thick films demonstrating a large strain of 1.18%. The outstanding strain response can be attributed to the notable contribution of electric field-induced phase transition and polarization dynamics. This work provides a promising potential application of micrometer-thick BNT-ST thin films in advanced actuator devices.

Topology-induced local electric polarization in 2D thiophene-based covalent organic frameworks for boosting photocatalytic H2 evolution

Topology-induced local electric polarization in 2D thiophene-based covalent organic frameworks for boosting photocatalytic H2 evolution

Electric polarization near vortices in the extended Kitaev model

We formulate a Majorana mean-field theory for the extended JKΓ Kitaev model in a magnetic Zeeman field of arbitrary direction, and apply it for studying spatially inhomogeneous states harboring vortices. This mean-field theory is exact in the pure Kitaev limit and captures the essential physics throughout the Kitaev spin liquid phase. We determine the charge profile around vortices and the corresponding quadrupole tensor. The quadrupole-quadrupole interaction between distant vortices is shown to be either repulsive or attractive, depending on parameters. We predict that electrically biased scanning probe tips enable the creation of vortices at preselected positions. Our results paves the way for the electric manipulation of Ising anyons in Kitaev spin liquids.