Abstract
Electromagnetic (EM) wave absorbing materials have been widely used in various equipment to reduce the interference caused by EM waves. However, current EM wave absorbing materials are limited by narrow absorption bandwidth under high temperatures due to a lack of structural design. Herein, SiC ceramic and large-scale SiC honeycomb metastructure were monolithically fabricated by material extrusion 3D printing. The real permittivity and imaginary permittivity of as-obtained SiC ceramic approached 10 and 2.3 within the frequency of 2–18 GHz. After optimized structure design, the as-obtained SiC honeycomb metastructure exhibited broadband EM performance of −10 dB effective bandwidth from 4.85 to 39.49 GHz (34.64 GHz) when the incident angle was 60° at room temperature. Moreover, the as-obtained SiC honeycomb structure had a stable broadband −10 dB effective bandwidth of above 35 GHz when the incident angle is 60° even after in-situ 1000 °C and ex-situ 1600 °C erosion in the air atmosphere. Broadband EM wave absorption under oblique incident wave was also achieved from 30° to 60° both in transverse electric (TE) polarization and transverse magnetic (TM) polarization. This novel strategy unravels the potential of additive manufacturing of high-performance EM wave absorbers for high temperature environment applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
