Structure Of Electrical Double Layer Research Articles

(Invited) Solid/Electrolyte Interface Under Confinement in Divalent Water-in-Salt Electrolytes

Concentrated aqueous electrolytes (water-in-salt electrolytes, WiSEs) have gained increasing attention in the last few years because they display much wider electrochemical stability windows (upwards of 3V) than the thermodynamic limit of water (1.23V), making them exciting candidates for a variety of electrochemical systems including aqueous batteries. Importantly, it is the ions directly at the electrode/electrolyte interface that are key to explaining this unexpected reactivity. The electrode/electrolyte interface is classically thought of as the electrical double layer (EDL), or the ion arrangement at an interface that builds up to neutralize the surface potential. WiSEs present very different EDL structures than do classical dilute electrolytes. However, most work has focused on monovalent WiSEs, primarily motivated by Li-battery applications using lithium bis(trifluoromethylsulphonyl)imide (LiTFSI).In this work, we aim to understand how divalent ions within the WiSE regime alter both the short-range and long-range signatures of the EDL under confinement. For most of the above applications, reactions occur within the pore-space of a porous electrode, which exhibit confined, overlapping EDLs. Therefore, we use confinement as a tool to probe both the short-range layering structure (<10 nm) and electrostatic decay length (~10-100 nm) away from a charged interface with Surface Forces Apparatus (SFA) measurements.Using WiSEs comprising LiTFSI, Zn(TFSI)2, and mixtures of the two salts, we first establish the bulk structure of these electrolytes using Wide Angle X-Ray Scattering and Raman Spectroscopy, which reveal that the anion and cation are closely associated in all electrolytes, regardless of cation valency. Additionally, clusters of ions are formed in all electrolytes, however, the clusters are suppressed with increasing divalent ion fraction. Under confinement, SFA results demonstrate that the thickness of the adsorbed layer of ions at a solid/electrolyte interface grows with increasing divalent ion fraction. Multiple interfacial layers are formed following this adlayer, and these layers seem dependent on anion size, rather than cation. Importantly, all electrolytes exhibit very long electrostatic decay lengths that are insensitive to valency. This work contributes significant fundamental understanding regarding the structure and charge-neutralization mechanism in this class of electrolytes both in the bulk and under confinement at an interface.

Mechanism of overscreening breakdown by molecular-scale electrode surface morphology in asymmetric ionic liquids

The interfacial nature of the electric double layer (EDL) assumes that electrode surface morphology significantly impacts the EDL properties. Since molecular-scale roughness modifies the structure of EDL, it is expected to disturb the overscreening effect and alter differential capacitance (DC). In this paper, we present a model that describes EDL near atomically rough electrodes with account for short-range electrostatic correlations. We provide numerical and analytical solutions for the analysis of conditions for the overscreening breakdown and DC shift estimation. Our findings reveal that electrode surface structure leads to DC decrease and can both break or enhance overscreening depending on the relation of surface roughness to electrostatic correlation length and ion size asymmetry.

Anionic Surfactant-Modulated Electrode-Electrolyte Interface Promotes H2O2 Electrosynthesis.

Conventional strategies for highly selective and active hydrogen peroxide (H2O2) electrosynthesis primarily focus on catalyst design. Electrocatalytic reactions take place at the electrified electrode-electrolyte interface. Well-designed electrolytes, when combined with commercial catalysts, can be directly applied to high-efficiency H2O2 electrosynthesis. However, the role of electrolyte components is equally crucial but is significantly under-researched. In this study, anionic surfactant n-tetradecylphosphonic acid (TDPA) and its analogs are used as electrolyte additives to enhance the selectivity of the two-electron oxygen reduction reaction. Mechanistic studies reveal that TDPA assembled over the electrode-electrolyte interface modulates the electrical double-layer structure, which repels interfacial water and weakens the hydrogen-bond network for proton transfer. Additionally, the hydrophilic phosphonate moiety affects the coordination of water molecules in the solvation shell, thereby directly influencing the proton-coupled kinetics at the interface. The TDPA-containing catalytic system achieves a Faradaic efficiency of H2O2 production close to 100% at a current density of 200mA cm-2 using commercial carbon black catalysts. This research provides a simple strategy to enhance H2O2 electrosynthesis by adjusting the interfacial microenvironment through electrolyte design.

Effect of alkali metal cations in alkaline iron battery electrodes

Abstract Rechargeable alkaline iron batteries (e.g. Ni-Fe and Fe-air) have been extensively studied recently as viable energy storage systems for renewable energy sources. However, inherent issues such as passivation of the iron and parasitic hydrogen evolution reaction (HER) on the electrode surface limit their full capability. Multiple approaches to improving iron electrode performance have been conducted, few of which focused on electrolyte composition. While alkali metal (AM) cations on the electrolyte do not directly participate in the electrochemical reactions, their intrinsic characteristics can dictate the performance of the electrode. Investigating the interface interactions and electrical double layer (EDL) structure can provide a deeper insight into the operation of iron electrodes in an alkaline solution. In this work, we investigated the effect of alkali metal cations (Li+, Na+, K+, Cs+) in the electrolyte solution in inhibiting passivation and HER on electrodeposited iron on carbon paper (Fe/CP) electrodes. The electrochemical measurements show that the iron redox and HER activities of the electrode increased with increasing cation size in the electrolyte. The non-covalent interactions between hydrated alkali metal cations and adsorbed OH species resulted to the formation of quasi-adsorbed clusters which can block active sites on the electrode surface. Furthermore, the concentration of these clusters decreases with increasing cation size which resulted to higher EDL capacitance and ECSA values of the electrode. The results of this work provide a better understanding of the surface reactions on iron electrodes and can help in developing novel techniques for suppressing passivation and parasitic HER on rechargeable alkaline iron batteries.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long‐Lasting Zinc Metal Batteries

AbstractRegulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL‐regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long‐lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N‐dimethyl‐1H‐imidazole‐1‐sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O‐induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de‐solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high‐performance zinc metal batteries.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-Lasting Zinc Metal Batteries.

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

Electrolyte‐Tailored Heterostructured Zinc Metal Anodes with Tunable Electric Double Layer for Fast‐Cycling Aqueous Zinc Batteries

AbstractThe structures and properties of the electric double layer (EDL) on zinc (Zn) anodes significantly influence the cycling and rate performance of aqueous Zn batteries (ZBs). Here, a strategy is reported to regulate the EDL structure through work function (Wf) engineering to effectively enhance the electrochemical performance of ZBs, which is enabled by electrolyte‐tailored growth of heterogenous metal with a large Wf on the Zn anode. The metal‐to‐metal charge transfer in heterostructured Zn metal induced by the disparity of Wf increases the surface charge density, which enriches the Zn ions and shortens the thickness of EDL. The compressed EDL weakens the repulsive force of Zn deposits to achieve a tightly stacked and dendrite‐free Zn deposition. Besides, the formed H2O‐deficient EDL structure enables the inorganic‐rich solid electrolyte interphase (SEI) with high Zn‐ion conductivity to inhibit the notorious parasitic reactions and improve the electrode reaction kinetics. Consequently, the Zn||Zn symmetric cells demonstrate an ultra‐long cycling life over 2700 cycles (the cumulative capacity reaches 5400 mA h cm−2) at a high current density of 50 mA cm−2. The Zn anodes show a high average Coulombic efficiency of 99.70% over 3650 cycles. The Zn||MnO2 full cells exhibit excellent practical‐level performance under cyclic continuous mode (3000‐cycle life at high rates) and cyclic intermittent mode (1170‐cycle life with 83.05% capacity retention). Practical pouch cells are also demonstrated with outstanding cycling performance.

A first-principles study of the formation and regulation of the electric double layers at Cu (0 0 1)/mineral oil interfaces

Copper-mineral oil interfaces are key components of oil-impregnated power transformers and are commonly believed to be one of their weak points. The formation of an electric double layer (EDL) at this interface as a result of charge accumulation and transfer is crucial to its insulating properties, but a molecular-level understanding of this phenomenon remains unclear. To understand this fundamental aspect, we have investigated the effect of different EDLs on the electric potential and interfacial potential barrier between copper and mineral oil by using first principle calculations. Based on the calculations, the EDL is shown to reduce the interfacial potential barrier and enhance the diffusion of oil molecules at the interface when the copper side is negatively charged and the mineral oil side is positively charged. In contrast, when the copper side is positively charged and the mineral oil side is negatively charged, the corresponding EDL can increase the interfacial potential barrier and reduce the diffusion of oil molecules at this interface. Our findings shed light on the relationship between the structure of EDLs and their electrical properties in oil-impregnated power transformers.

Double layer capacitors in dye sensitized solar cells with large charge and energy storage capacity and controlled shape of output voltage signals.

The output signals in natural dyes-based solar cells (DSSC) can be either rising or decaying depending on the type of ions present in the system; these ions called added ions, are introduced by the additives: mordant and brighteners. The photon-dye interaction produces electrons, which eventually reach the electrode giving place to a superficially charged electrode in contact with an electrolyte where are the added ions. This combination produces, automatically, an electrical double-layer EDL structure which has important effects on the performance of the system: a) the added ions control, to a large extent, the initial shape of the output signal, giving rise to rising or decaying profiles; b) it is possible to store large amounts of energy and charge at high electric fields. This structure is found in many other systems that have a surface charged in contact with an electrolyte like piezoelectric materials in human body. This assertion was supported by determining important parameters such as the force between charged surfaces on both sides of the interface, the charge density, the energy density, and the capacitance. The Debye length has very small values then, many important quantities depend on this; it is possible to obtain large values for energy UDL ~ 3.6x105 Jm-3 and charge density ρDL ≈ 1.1x107 Cm-3 for double layer capacitors; these values are orders of magnitude larger than the corresponding values for electrostatic capacitors: Uelec ≈ 4.5x10-3 Jm-3 and ρelec ≈ 1.2 Cm-3. A non-linear model was also developed to fit unstable oscillations found in the output profiles produced by abrupt lighting.

Measurement of the double-layer capacitance of Pt(111) in acidic conditions near the potential of zero charge

Quantifying the charge density stored at the Pt(111)/aqueous interface using the double-layer capacitance close to the potential of zero charge (Cdl,PZC) at 0.30 VNHE is of critical importance to elucidating the structure of the electrical double layer (EDL) in the absence of any competing adsorption processes. Marked discrepancies in the values of Cdl for this interface exist in the literature, which we show are likely attributable to the measurement technique used. To directly observe the predicted Gouy-Chapman capacitance minimum at the PZC in the double-layer window between 0.40-0.55 VRHE, anomalously low electrolyte concentrations (0.1 mM HClO4) are needed. The measurement of accurate values of Cdl,PZC is made highly non-trivial by the extremely large solution resistances (∼80-100 kΩ) measured in this required dilute electrolyte as well as the non-negligible deviations from ideal capacitive behaviour (i.e., constant phase element behaviour) displayed even by this well-ordered model electrochemical system. We provide here a comparison between using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and alternating current-cyclic voltammetry (AC-CV) in determining Cdl,PZC for the Pt(111)/HClO4 interface, for different concentrations of the electrolyte. In particular, even when using optimized experimental parameters, we show that the estimated values of Cdl,PZC at 0.1 mM HClO4 still display a marked discrepancy depending on the technique used, ranging from 27-41 μF cm−2. At higher HClO4 concentrations, the discrepancies are much less pronounced. Importantly, however, the measured deviation from Gouy-Chapman theory, as quantified by the Parsons-Zobel plot slope, remains consistent across these techniques, implying that the EDL structure of the Pt(111)/aqueous interface continues to prove anomalous and enigmatic.

Electric Double Layer Oriented Eutectic Additive Design toward Stable Zn Anodes with a High Depth of Discharge.

ZnSO4-based electrolytes for aqueous zinc ion batteries fail to meet practical application metrics due to hydrogen evolution reaction (HER) and dendrite growth. In this work, a highly polarized eutectic additive, glycerophosphorylcholine (GPC) is rationally designed, to regulate the electric double layer (EDL) structure for stable Zn anodes with a high depth of discharge (DOD). On one hand, GPC molecules with abundant hydroxyl groups can precisely regulate the hydrogen bond network in EDL to suppress HER. On the other hand, the enrichment of GPC at the interface is positively responsible for the negative charge density on the Zn surface, which leads to the formation of a robust ZnxPyOz-rich solid-electrolyte interphase and terminates dendrite growth in the charge-rich sites. This EDL-oriented eutectic additive engineering enables highly reversible and selectively (002)-textured Zn anodes to operate for over 1450h at a high DOD of 45.3%. Meanwhile, a high-capacity (185.7mAhg-1) aqueous Zn||VS2 full cell shows remarkable cycling stability over 220 cycles with an excellent capacity retention of 90.4% even at a low current density of 0.1Ag-1 (0.5C). This work sheds light on electrolyte design and interface engineering for high-performance aqueous batteries.

Reconstruction of Electric Double Layer on the Anode Interface by Localized Electronic Structure Engineering for Aqueous Zn Ion Batteries

AbstractThe electric double layer (EDL) at the electrode/electrolyte interface plays a crucial role to the electrochemical reactions of zinc ion batteries. For Zn anode, the EDL consists of H2O dipoles, which can cause Zn corrosion and passivation. Herein, the localized electronic‐rich (LER) structure performing as soild electrolyte interphase (SEI) changes the electron distribution, leading to the rapid capture of Zn2+, thus promoting the desolvation of the cH2O shell. Moreover, the LER generates an electrostatic repulsion effect to SO42−. Consequently, a unique H2O‐poor EDL is reconstructed with the distribution of Zn2+‐H2O‐SO42−, which inhibits side reactions and improves the deposition kinetics of Zn2+. In situ Raman intuitively confirms that the zinc‐ion‐flux is uniform during the whole electroplating process. LER as regulator for EDL structure, leads to smooth and fast Zn2+ deposition. The performance enhancement is demonstrated by LER@Zn//LER@Zn cells, which exhibit exceptional lifespan for 4800 h. Furthermore, the LER@Zn///MnO2 cell shows improved cycling stability over 1500 cycles, with a high capacity of 124 mAh g−1 at 5 C.

Positively Charged Amino Acid-Modulated Interfacial Chemistry and Deposition Textures for Highly Reversible Zinc Anodes.

Interfacial active water molecule-induced parasitic reactions and stochastic Zn2+ transport-caused dendrite issue significantly impede the implementation of aqueous Zn-ion batteries. Herein, three positively charged amino acids, namely arginine, histidine, and lysine, were utilized as adsorption-type electrolyte additives to enhance the stability and reversibility of Zn anodes. Combined theoretical and experimental analyses verified that these amino acid cations can synergistically modulate the interfacial microenvironment and promote orientational Zn deposition. The adsorbed amino acid cations reconfigured the interfacial electric double layer structure, forming SO42-- and H2O-poor interfaces, thereby retarding hydrogen evolution and corrosion side reactions. Simultaneously, the preferential adsorption of the amino acid cations at specific facets induced crystallographic orientational Zn deposition along unterminated facets. Three deposition architectures, namely planar texture, subvertical alignment, and vertical erection, were obtained, all effectively inhibiting dendrite formation. Consequently, symmetric cells with the three amino acid cations exhibited high stripping/plating reversibility of over 2000 cycles at 5 mA cm-2. Moreover, MnO2-based full cells exhibited markedly improved stabilities compared with their additive-free counterparts.

Demulsification of W/O emulsions induced by terahertz pulse electric fields-driven hydrogen bond disruption of water molecules

Demulsifying highly stable W/O emulsions, composed of heavy oil and water, is crucial for simplifying crude oil processing, reducing production costs, and mitigating environmental pollution. In these emulsions, aromatic components in the oil phase stack via π-π interactions, while hydrogen bonds stabilize the water phase. This leads to the creation of a strong oil-water interface through electrostatic attraction, ultimately hindering water droplet coalescence and oil-water separation. In this study, a 1.0 THz pulse electric field is introduced to effectively disrupt the hydrogen bond network among water molecules by inducing hydrogen bond resonance. This disruption contributes to increased water mobility in the oil phase, weakened stability of the oil-water interface film, and facilitates efficient water droplet coalescence in the oil phase. The results show that throughout the demulsification process, the average number of hydrogen bonds per water molecule rapidly decreases from 1.41 to 1.08 within 100 ps. The upper and lower limits of hydrogen bond lifetimes decrease by 8.12 ps and 3.24 ps, respectively. This indicates a significant disruption in the stability of hydrogen bonds between water molecules. Concurrently, the terahertz pulse electric field disrupts the initially stable oil-water interface film of the emulsion system, leading to a noteworthy reduction in the oil-water interface tension from 54.3 to 39.2 mN·m−1. The self-diffusion coefficient of water molecules increases from 1.33 to 2.62 Å2·ps−1, signifying that water molecules are more inclined to penetrate the interfacial region between the two phases. Additionally, the terahertz pulse electric field induces alterations in the arrangement of water molecules, resulting in the rearrangement of electrons in the water phase and disrupting the originally stable electrical double layer structure of the oil-water interface. This study provides novel insights into the development of efficient and environmentally friendly electric demulsification technologies, holding significant potential for widespread industrial applications.

Uncovering the cation effects on the electroreduction of CO2 on Pd/C catalysts − an SEIRAS study

Electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) has long been known to be affected by the electrolyte cations, yet the interpretations of these effects remain controversial. In this work, taking advantage of the unique catalytic characteristics of Pd, we investigated the cation effects on the CO2RR. It was found that the productions of formate and carbon monoxide (CO) are accelerated, and the competitive hydrogen evolution reaction (HER) is suppressed on Pd surfaces by larger cations. Detailed ATR-SEIRAS measurements revealed the promotion of CO2RR comes from two aspects. First, the CO2 molecules can be concentrated at the electrode–electrolyte interface by larger cations through electrostatic interaction. Second, a stronger interfacial electric field brought by the larger cations can accelerate the CO2RR and stabilize the negatively charged intermediates. The potential-dependent spectral transitions of adsorbed CO and interfacial water shed new light on the cation-dependent electric double layer structures. In light of these findings, the cation effects on the formate and CO pathways at different overpotentials were further revealed.

Steering Selectivity in Electrocatalytic Furfural Reduction via Electrode-Electrolyte Interface Modification.

Electrocatalytic reduction of biomass-derived furfural (FF) represents a sustainable route to produce furfuryl alcohol (FA) and 2-methylfuran (MF) as a value-added chemical and a biofuel, respectively. However, achieving high selectivity for MF as well as tuning the selectivity between FA and MF within one reaction system remain challenging. Herein, we have reported an electrode-electrolyte interface modification strategy, enabling FA and MF selectivity steering under the same reaction conditions. Specifically, by modifying copper (Cu) electrocatalysts with butyl trimethylammonium bromide (BTAB), we achieved a dramatic shift in selectivity from producing FA (selectivity: 83.8%; Faradaic efficiency, FE: 68.9%) to MF (selectivity: 80.1%; FE: 74.8%). We demonstrated that BTAB adsorption over Cu modulates the electrical double layer (EDL) structure, which repels interfacial water and weakens the hydrogen-bond (H-bond) network for proton transfer, thus impeding FF-to-FA conversion by suppression of the hydrogen atom transfer (HAT) process. On the contrary, FF-to-MF conversion was less affected. This work shows the potential of engineering of the electrode-electrolyte interface for selectivity control in electrocatalysis.

Tailoring the Chemical/Electrochemical Response in a Quasi−Solid Polymer Electrolyte Enables the Simultaneous In Situ Construction of Superior Cathodic and Anodic Interfaces

AbstractAlthough the flexibility of the quasi−solid polymer electrolyte favors its surface conformal to the electrode, interfacial damage originating from side reactions between the electrolyte and the electrode remains dominant for battery failure. The design of quasi−solid electrolytes compatible with both aggressive nickel−rich cathode and lithium metal anode persists critical to the application of quasi−solid high−voltage lithium metal batteries (LMBs). Herein, a chemical/electrochemical response strategy is proposed to construct simultaneously stable cathodic and anodic interfaces relying on the synergistic effect of 1,4,7,10,13,16−hexaoxacyclooctadecane (18C6) and LiNO3. The distinctive [18C6Li]+NO3− cluster modifies electric double layer structure by specific adsorption on the electrode, thereby regulating the interfacial layer composition and construction. The NO3− on electrode preferentially decomposes to improve the interfacial performances, leaving the [18C6Li]+ to cut off the side reaction. Furthermore, the 18C6 coordinates with detrimental transition metal ions from NMC811 cathode and converts into useful clusters alleviating the knock−on effect. Thus, the quasi−solid electrolyte with 18C6 and LiNO3 enables Li||NMC811 coin cell to cycle stably over wide operation temperature (0−55 °C), especially, achieving high capacity retention of 79.2% after 300 cycles at 30 °C. This chemical/electrochemical response strategy projects new insights into the design of smart reactive electrolytes for high−voltage LMBs.

Modeling the Electric Double Layer at the Liposome Vesicle via Classical Density Functional Theory: Solution of Poisson's Equations for Curved Membranes.

The electric double layer at the liposome vesicle membrane has been investigated by a modified fundamental-measure theory in the framework of the restricted primitive model. An analytical equation has been obtained for the mean electrostatic potential (MEP) by solving Poisson's equation for curved membranes. This study investigates the influence of vesicle size, membrane thickness, surface charges, and electrolyte concentration on the structure, composition, and width of electric double layers (EDLs) on the inner and outer membrane walls. Our findings indicate that a thin and denser layer of ions is formed at the concave wall of the membrane (inner wall) compared to that at the outer membrane. As expected, the width of the diffuse layer decreases with the concentration and surface charge. Also, when the surface charges on both concave and convex walls are the same, the absolute value of MEPs on the inner membrane, concave wall, is greater than that on the convex wall. We have also investigated the diffuse potential, which decreases with concentration, membrane thickness, and cavity size, whereas it increases with surface charges. As we expect, the contact density of counterions at the inner concave wall of the vesicle cavity is always greater than the corresponding value at the convex wall, whereas this trend reverses for co-ions. Also, the contact density of counterions (co-ions) at the inner wall decreases (increases) with cavity size, whereas it increases at the outer wall (decreases). Finally, depletion of co-ions occurs at the membrane walls with enhancement in surface charges.

Utilizing the Adsorbability of Pseudoboehmite for Tailoring the Stability of an Aluminum Sulfate Alkali-free Accelerator for Shotcrete.

Shotcrete is widely used in tunnels, bridges, culverts, and other large-scale projects. The accelerator is an additive employed to expedite the setting time of shotcrete. Previous research primarily concentrated on enhancing the early strength of accelerators, whereas their long-term stability has been inadequately investigated. In this study, pseudoboehmite (PB) and amorphous aluminum hydroxide (AAH) were incorporated into the accelerator to enhance its stability over a period of 90 days without any signs of crystallization or delamination. Furthermore, the accelerator exhibited an initial setting time of 170 s, a final setting time of 550 s, and a compressive strength of 11.58 MPa after 1 day. The mechanism of effects was studied by isothermal calorimetry, FTIR, XRD, TG-DTG, and SEM analysis. The enhancement in stability is attributed to the distinctive adsorption and thixotropic properties of PB, which facilitate the formation of an electrical double-layer structure in acidic solutions. The expedited setting and hardening are primarily due to the equilibrium between Al3+, SO42-, and Ca2+ ions, which accelerates the hydration process of cement. This research offers a methodology for developing a high-performance, alkali-free liquid accelerator.

Influence of electric double layer rigidity on CO adsorption and electroreduction rate

Understanding the structure of the electric double layer (EDL) is critical for designing efficient electrocatalytic processes. However, the interplay between reactant adsorbates and the concentrated ionic species within the EDL remains an aspect that has yet to be fully explored. In the present study, we employ electrochemical CO reduction on Cu as a model reaction to reveal the significant impact of EDL structure on CO adsorption. By altering the sequence of applying negative potential and elevating CO pressure, we discern two distinct EDL structures with varying cation density and CO coverage. Our findings demonstrate that the EDL comprising densely packed cations substantially hinders CO adsorption on the Cu as opposed to the EDL containing less compact cations. These two different EDL structures remained stable over the course of our experiments, despite their identical initial and final conditions, suggesting an insurmountable kinetic barrier present in between. Moreover, we show that the size and identity of cations play decisive roles in determining the properties of the EDL in CO electroreduction on Cu. This study presents a refined adaptation of the classical Gouy-Chapman-Stern model and highlights its catalytic importance, which bridges the mechanistic gap between the EDL structure and cathodic reactions.