Municipal Wastewater Treatment Plant Effluents Research Articles

Insights on Microplastic Contamination from Municipal and Textile Industry Effluents and Their Removal Using a Cellulose-Based Approach.

The rampant use of plastics, with the potential to degrade into insidious microplastics (MPs), poses a significant threat by contaminating aquatic environments. In the present study, we delved into the analysis of effluents from textile industries, a recognized major source of MPs contamination. Data were further discussed and compared with a municipal wastewater treatment plant (WWTP) effluent. All effluent samples were collected at the final stage of treatment in their respective WWTP. Laser diffraction spectroscopy was used to evaluate MP dimensions, while optical and fluorescence microscopies were used for morphology analysis and the identification of predominant plastic types, respectively. Electrophoresis was employed to unravel the prevalence of negative surface charge on these plastic microparticles. The analysis revealed that polyethylene terephthalate (PET) and polyamide were the dominant compounds in textile effluents, with PET being predominant in municipal WWTP effluents. Surprisingly, despite the municipal WWTP exhibiting higher efficiency in MP removal (ca. 71% compared to ca. 55% in textile industries), it contributed more to overall pollution. A novel bio-based flocculant, a cationic cellulose derivative derived from wood wastes, was developed as a proof-of-concept for MP flocculation. The novel derivatives were found to efficiently flocculate PET MPs, thus allowing their facile removal from aqueous media, and reducing the threat of MP contamination from effluents discharged from WWTPs.

Evaluation of microplastic particle transmission in a microfiltration process using fluorescence measurements: Effect of pore size and flux

Microplastic (MP) pollution in the aquatic environment is widespread, with a significant fraction of these particles originating from municipal wastewater treatment plant (WWTP) effluents. Whereas membrane filtration processes are touted as an effective MP removal strategy, the rejection of irregularly-shaped plastic particles, similar to those found in WWTPs, is poorly understood. Here, we characterize the filtration of irregularly-shaped MP particles (∼10 μm) through Durapore® microfiltration membranes (0.45 and 5 μm pore sizes). These particles were produced via ball-milling/sieving processes from a fluorescent polyethylene feedstock, enabling particle concentrations to be quantified using a standard fluorometric plate reader. Permeate samples from the 0.45 μm membrane exhibited low fluorescent intensities relative to feed samples, implying minimal MP transmission. Conversely, appreciable MP transmission through the 5 μm membrane was noted, with sizable MPs (∼2–7 μm) found in the permeate. This transmission was exacerbated at higher fluxes which emphasizes how operating conditions can govern MP retention. Post-filtration analyses demonstrated that particle capture occurred largely at the feed-membrane interface, where greater MP intrusion into the membrane was seen at the larger pore size. These results reaffirm the importance of choosing an appropriate membrane/membrane pore size and operating conditions to maximize MP retention in WWTPs.

Micropollutant elimination by sustainable technologies: Coupling activated carbon with solar photo-Fenton as pre-oxydation step

This study evaluates the effectiveness of coupling solar photo-Fenton (SPF) with granular activated carbon (GAC) filtration to remove three selected micropollutants (benzotriazole, carbamazepine and diclofenac) from municipal wastewater treatment plant (WWTP) effluent. SPF was first studied stand-alone at natural pH with simulated and real irradiation in raceway pond reactors (RPR) in different water matrices. The scenario with the poorest removal was the use of real WWTP effluent as water matrix; the removal achieved was 25 % of benzotriazole, 57 % of carbamazepine and up to 80 % of diclofenac (6 mg L−1 of iron, 40 mg L−1 of H2O2, 15 cm depth, 0.49 kJ L−1). In the second phase, fresh and regenerated GAC were studied in different water matrices, showing that the complex matrices had a higher influence on the regenerated GAC. Thus, the breakthrough of regenerated GAC was achieved quicker than fresh GAC. The aim of the work was to extend the GAC lifetime by a pre-oxidation process; thus, SPF was applied for 5 minutes (0.05–0.08 kJ L−1) as a first step. GAC lifetime was extended between 2 and 12 times thanks to the pre-treatment by SPF, equaling the lifetime of the regenerated GAC to the fresh one in the more complex matrix.

Environmentally Relevant Antibiotic Concentrations Exert Stronger Selection Pressure on River Biofilm Resistomes than AMR-Reservoir Effluents.

Freshwater environments are primary receiving systems of wastewater and effluents, which carry low concentrations of antibiotics and antimicrobial-resistant (AMR) bacteria and genes. Aquatic microbial communities are thus exposed to environmentally relevant concentrations of antibiotics (ERCA) that presumably influence the acquisition and spread of environmental AMR. Here, we analyzed ERCA exposure with and without the additional presence of municipal wastewater treatment plant effluent (W) and swine manure run-off (M) on aquatic biofilm resistomes. Microscopic analyses revealed decreased taxonomic diversity and biofilm structural integrity, while metagenomic analysis revealed an increased abundance of resistance, virulence, and mobile element-related genes at the highest ERCA exposure levels, with less notable impacts observed when solely exposed to W or M effluents. Microbial function predictions indicated increased gene abundance associated with energy and cell membrane metabolism and heavy metal resistance under ERCA conditions. In silico predictions of increased resistance mechanisms did not correlate with observed phenotypic resistance patterns when whole communities were exposed to antimicrobial susceptibility testing. This reveals important insight into the complexity of whole-community coordination of physical and genetic responses to selective pressures. Lastly, the environmental AMR risk assessment of metagenomic data revealed a higher risk score for biofilms grown at sub-MIC antibiotic conditions.

Microparticles in Wild and Caged Biota, Sediments, and Water Relative to Large Municipal Wastewater Treatment Plant Discharges.

Anthropogenically modified microparticles including microplastics are present in municipal wastewater treatment plant (WWTP) effluents; however, it is unclear whether biotic exposures are elevated downstream of these outfalls. In the fall of 2019, the present study examined whether microparticle levels in resident fish, environmental samples, and caged organisms were elevated near the Waterloo and Kitchener WWTP outfalls along the Grand River, Ontario, Canada. Wild rainbow darters (Etheostoma caeruleum) were collected from a total of 10 sites upstream and downstream of both WWTPs, along with surface water and sediment samples to assess spatial patterns over an approximately 70-km river stretch. Amphipods (Hyalella azteca), fluted-shell mussels (Lasmigona costata), and rainbow trout (Oncorhynchus mykiss) were also caged upstream and downstream of one WWTP for 14 or 28 days. Whole amphipods, fish digestive tracts, and mussel tissues (hemolymph, digestive glands, gills) were digested with potassium hydroxide, whereas environmental samples were processed using filtration and density separation. Visual identification, measurement, and chemical confirmation (subset only) of microparticles were completed. Elevated abiotic microparticles were found at several upstream reference sites as well as at one or both wastewater-impacted sites. Microparticles in amphipods, all mussel tissues, and wild fish did not show patterns indicative of increased exposures downstream of effluent discharges. In contrast, elevated microparticle counts were found in trout caged directly downstream of the outfall. Across all samples, cellulose fibers (mainly blue and clear colors) were the most common. Overall, results suggest little influence of WWTP effluents on microparticles in biota but rather a ubiquitous presence across most sites that indicates the importance of other point and nonpoint sources to this system. Environ Toxicol Chem 2024;43:1047-1061. © 2024 His Majesty the King in Right of Canada and The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. Reproduced with the permission of the Minister of Environment and Climate Change Canada.

Carbon-negative and high-rate nutrient recovery from municipal wastewater using mixotrophic Scenedesmus acuminatus

The efficiency of mixotrophic microalgae in enhancing the recovery of waste nutrients has been well established; however, the recovery rate is crucial in meeting the needs of field applications. This study evaluated the impact of media characteristics on nutrient recovery under mixotrophic conditions. The mixotrophic N recovery rate with S. acuminatus in modified BG-11 reached 2.59 mg L−1h−1. A mixotrophic growth optimization strategy was applied to achieve a high-rate nutrient recovery from municipal wastewater treatment plant effluents. The contribution of waste chemical oxygen demand (COD) to nutrient recovery was assessed using secondary effluent (SE) under heterotrophy. The results highlighted a significant increase in total nitrogen (TN) and total phosphorus (TP) recovery rates when glucose was supplied, indicating the additional carbon requirements for efficient nutrient recovery. The TN and TP recovery rates under mixotrophic conditions with the addition of trace metals and high cell density were enhanced by 91.94% and 92.53%, respectively, resulting in recovery rates of 3.43 mg L−1h−1 and 0.30 mg L−1h−1. The same conditions were used for nutrient recovery from primary effluent (PE), and the results were more satisfactory as the TN and TP recovery rates reached 4.79 and 0.55 mg L−1h−1, respectively. Additionally, the study estimated the carbon footprints (C-footprints) and areal footprints of mixotrophy-based nitrogen recovery. The findings revealed carbon footprints and areal footprints of −15.93 ± 4.57 tCO2e t−1 N recovery and 0.53 ± 0.19 m3 m−2d−1 wastewater, respectively. This high-rate nutrient recovery, achieved under a carbon-negative (C-negative) budget through mixotrophy, presents a novel strategy for efficiently recovering resources from municipal wastewater, thus facilitating resource recycling and ensuring environmental sustainability.

Gamma-ray irradiation as an effective method for mitigating antibiotic resistant bacteria and antibiotic resistance genes in aquatic environments

The prevalence of antibiotic resistance genes (ARGs) in municipal wastewater treatment plants (MWTPs) has emerged as a significant environmental concern. Despite advanced treatment processes, high levels of ARGs persist in the secondary effluent from MWTPs, posing ongoing environmental risks. This study explores the potential of gamma-ray irradiation as a novel approach for sterilizing antibiotic-resistant bacteria (ARB) and reducing ARGs in MWTP secondary effluent. Our findings reveal that gamma-ray irradiation at an absorbed dose of 1.6 kGy effectively deactivates all culturable bacteria, with no subsequent revival observed after exposure to 6.4 kGy and a 96-h incubation in darkness at room temperature. The removal efficiencies for a range of ARGs, including tetO, tetA, blaTEM-1, sulI, sulII, and tetW, were up to 90.5% with a 25.6 kGy absorbed dose. No resurgence of ARGs was detected after irradiation. Additionally, this study demonstrates a considerable reduction in the abundances of extracellular ARGs, with the transformation efficiencies of extracellular tetracycline and sulfadiazine resistance genes decreasing by 56.3–81.8% after 25.6 kGy irradiation. These results highlight the effectiveness of gamma-ray irradiation as an advanced and promising method for ARB sterilization and ARG reduction in the secondary effluent of MWTPs, offering a potential pathway to mitigate environmental risks associated with antibiotic resistance.

Influence of ozonation and UV/H2O2 on the genotoxicity of secondary wastewater effluents

The implementation of novel wastewater treatment technologies, including Advanced Oxidation Processes (AOPs) such as ozonation and ultraviolet radiation (UV) combined with hydrogen peroxide (H2O2), can be a promising strategy for enhancing the quality of these effluents. However, during effluent oxidation AOPs may produce toxic compounds that can compromise the water reuse and the receiving water body. Given this possibility, the aim of this study was to evaluate the genotoxic potential of secondary effluents from two different Wastewater Treatment Plants (WWTP) that were subjected to ozonation or UV/H2O2 for periods of 20 (T1) and 40 (T2) minutes. The genotoxic potential was carried out with the Comet assay (for clastogenic damage) and the Micronucleus assay (for clastogenic and aneugenic damage) in HepG2/C3A cell culture (metabolizing cell line). The results of the comet assay revealed a significant increase in tail intensity in the Municipal WWTP (dry period) effluents treated with UV/H2O2 (T1 and T2). MN occurrence was noted across all treatments in both Pilot and Municipal WWTP (dry period) effluents, whereas nuclear buds (NBs) were noted for all Pilot WWTP treatments and UV/H2O2 treatments of Municipal WWTP (dry period). Moreover, the UV/H2O2 (T1) treatment of Municipal WWTP (dry period) exhibited a noteworthy incidence of multiple alterations per cell (MN + NBs). These findings imply that UV/H2O2 treatment demonstrates higher genotoxic potential compared to ozonation. Furthermore, seasonal variations can have an impact on the genotoxicity of the samples. Results of the study emphasize the importance of conducting genotoxicological tests using human cell cultures, such as HepG2/C3A, to assess the final effluent quality from WWTP before its discharge or reuse. This precaution is essential to safeguard the integrity of the receiving water body and, by extension, the biotic components it contains.

Research on the Depth Treatment of Municipal Wastewater Treatment Plant Effluent Using Artificial Wetlands Planted with Different Types of Plants

Research on the Depth Treatment of Municipal Wastewater Treatment Plant Effluent Using Artificial Wetlands Planted with Different Types of Plants

Solar-assisted photodegradation of pesticides over pellet-shaped TiO2-kaolin catalytic macrocomposites at semi-pilot-plant scale: Elucidation of photo-mechanisms and water matrix effect

The behavior of novel pellet-shaped bulky titania-kaolin photocatalysts is herein evaluated for its application in the solar-assisted photocatalytic treatment of a bio-recalcitrant pesticide mix (imidacloprid, pyrimethanil and methomyl) in solar lab-scale and semi-pilot scale raceway pond photoreactors. The photocatalyst consists of 1 cm long titania-kaolin macro-composites that combine some advantages of both nanoparticulate and supported catalysts without being either. This opening the opportunity to extend the use of this photocatalyst to complex wastewater effluents. In addition, their stability and reusability potential was also evaluated, and reactive species leading to the solar-degradation of each pesticide were also identified using radical scavengers. Total removal of pesticides (2 mg L−1 each) with an optimal pellets dosage of 34.8 g L−1 was addressed, whether in ultrapure water (180–270 min of solar irradiation) or in two basic pH Municipal Wastewater Treatment Plant (MWWTP) effluents (≤300 min of solar irradiation) where methomyl was always the most recalcitrant pesticide. Lower Total Organic Carbon (TOC) removal (≈53–56%) was also found under the effect of these complex MWWTP effluents than in ultrapure water (>60%). Those results are very promising when comparing to the almost negligible TOC removal achieved with the Titania powder under basic MWWTP effluents due to the strong effect of particle aggregation. Very good photocatalyst stability and durability was shown along three consecutive cycles after applying a low-cost recovery protocol consisting of several washing and drying cycles without addressing a significant photoefficiency loss (TOC≈60-56%). The application of scavengers revealed that hydroxyl radical generated from photoinduced holes was the dominant species in the degradation of pyrimethanil and methomyl whereas reactive oxygen species formed from conduction band electrons were mainly involved in the photo-oxidation of imidacloprid.

Target and Suspect Screening Integrated with Machine Learning to Discover Per- and Polyfluoroalkyl Substance Source Fingerprints.

This study elucidates per- and polyfluoroalkyl substance (PFAS) fingerprints for specific PFAS source types. Ninety-two samples were collected from aqueous film-forming foam impacted groundwater (AFFF-GW), landfill leachate, biosolids leachate, municipal wastewater treatment plant effluent (WWTP), and wastewater effluent from the pulp and paper and power generation industries. High-resolution mass spectrometry operated with electrospray ionization in negative mode was used to quantify up to 50 target PFASs and screen and semi-quantify up to 2,266 suspect PFASs in each sample. Machine learning classifiers were used to identify PFASs that were diagnostic of each source type. Four C5-C7 perfluoroalkyl acids and one suspect PFAS (trihydrogen-substituted fluoroethernonanoic acid) were diagnostic of AFFF-GW. Two target PFASs (5:3 and 6:2 fluorotelomer carboxylic acids) and two suspect PFASs (4:2 fluorotelomer-thia-acetic acid and N-methylperfluoropropane sulfonamido acetic acid) were diagnostic of landfill leachate. Biosolids leachates were best classified along with landfill leachates and N-methyl and N-ethyl perfluorooctane sulfonamido acetic acid assisted in that classification. WWTP, pulp and paper, and power generation samples contained few target PFASs, but fipronil (a fluorinated insecticide) was diagnostic of WWTP samples. Our results provide PFAS fingerprints for known sources and identify target and suspect PFASs that can be used for source allocation.

Peroxydisulfate activation using magnetic graphite intercalation compounds: A promising system for pharmaceuticals removal in treated wastewater matrix

The release of contaminants of emerging concern (CECs) from the effluents of municipal wastewater treatment plants (MWWTPs) into the environment is a major problem because of its influence on both the environment and human health. The Fenton system has been demonstrated to remove CECs from different aqueous matrices effectively. However, the Fenton system has been considered to be efficient at acidic pH, which hinders its application in MWWTPs. Herein, the Fenton-like oxidation catalyzed by iron species intercalated between carbon layers of graphite (as a recyclable catalyst) was studied to remove amoxicillin, as a model pharmaceutical, from effluents of MWWTPs. Response surface methodology (RSM) was used to optimize system parameters, including catalyst loading, peroxydisulfate (PDS) dosage, and reaction time. Amoxicillin removal in the proposed system reached more than 99% by utilizing a catalyst dosage of 2 g/L and 5 mM of PDS at neutral pH. Sensitivity analysis of model parameters indicated that the amoxicillin removal was highly sensitive to the dosage of the catalyst, while the model is less sensitive to PDS dosage and reaction time. The results indicated that the PDS activation employing magnetic graphite intercalation compounds could be used as a promising system for pharmaceutical removal from MWWTP effluents.

PPCPs in coastal wastewater treatment plant effluent and uptake by Pacific oysters (Crassostrea gigas): Findings from a laboratory experiment

Municipal wastewater treatment plant (WWTP) effluent is a primary source of pharmaceuticals and personal care products (PPCPs) to the marine environment, as most of these compounds are not fully removed during the treatment process. Continual discharge from WWTPs into coastal areas may act as a stressor by continually exposing organisms to a suite of PPCPs. To quantify organismal exposure to PPCP mixtures, we conducted a 12-week lab experiment that exposed Pacific oysters to effluent from two Oregon coastal WWTPs of different discharge capacities (permitted as <1 million gallons/day and >1 million gallons/day; or < or >3.785 million liters/day) at a dilution of 25 %. Composite samples of weekly collected effluent and a subset of freeze-dried oysters from experiment week 12 were analyzed for PPCPs. Though challenges with food availability inhibited our ability to confidently identify effects of the contaminants on growth and fitness, the experiment allowed us to examine uptake of contaminants from effluent into an estuarine bivalve of commercial importance. We detected 30 PPCPs and three alkylphenols in effluent and 13 PPCPs and four alkylphenols in oyster tissue, indicating high rates of release from secondary treatment and significant potential for marine organism exposure to and uptake of PPCPs in rural coastal areas.

Response of heavy-metal and antibiotic resistance genes and their related microbe in rice paddy irrigated with treated municipal wastewaters

Paddy irrigation with secondary effluents from municipal wastewater treatment plants (MWTPs) is a well-established practice to alleviate water scarcity. However, the reuse might lead to more complicated contamination caused by interactions between residual antibiotics in effluents and heavy metals in paddy soil. To date, no information is available for the potential effects of dual stress of heavy metals and antibiotics on heavy-metal resistance genes (MRGs) and antibiotic resistance genes (ARGs). Here, this study investigated the response of heavy metal and antibiotic resistance genes, and related microorganisms to the dual threat of antibiotics and heavy metals under the long-term MWTP effluent irrigation for rice paddy using metagenome. The results showed that there was not a negative effect on rice consumption if MWTP effluent was used to irrigate rice for a long time. The concentration of antibiotics could reshape the ARGs and MRG profiles in rice paddy soil. The findings revealed the co-occurrence of ARGs and MRGs in rice paddy soils, thus highlighting the need for simultaneous elimination of antibiotics and heavy metals to effectively reduce ARGs and MRGs. Acn and sul1 genes encoding Iron and sulfonamides resistance mechanisms are the most abundant MRG and ARG, respectively. Network analysis revealed the possibility that IntI1 plays a role in the co-transmission of MRG and ARG to host microbes, and that Proteobacteria are the most dominant hosts for MRG, ARG, and integrons. The presence of antibiotics in irrigated MWTP effluents has been found to stimulate the proliferation of heavy metal and antibiotic resistances by altering soil microbial communities. This study will enhance our comprehension of the co-selection between ARGs and MRGs, as well as reveal the concealed environmental impacts of combined pollution. The obtained results have important implications for food safety and human health in rice.

Water Reclamation from Primary Municipal Wastewater Treatment Plant Effluent by Membrane Distillation

In this work, Direct Contact Membrane Distillation (DCMD) was applied for the treatment of municipal wastewater collected from the primary clarifier of a municipal wastewater treatment plant (MWWTP). The water flux at 60℃ and 20℃ for the feed and permeate side, respectively was 51 kg/m2h in treating the primary effluent. Meanwhile, the electrical conductivity of distillate was in the good range at 1.5 – 1.8 S/cm. Most of the representative parameters for water reuse (SS, nitrate, nitrite, phosphate, total coliform, and turbidity) in the primary effluent were completely removed in MD module operation with PTFE (polytetrafluoroethylene)/ PP (polypropylene) bi-composite membrane. However, limited rejection rate was observed only in ammonia removal due to the volatility of ammonia. Pretreatment of the primary MWWTP effluent by NaOCl showed only 15% decline in water flux for 28 hours of continuous operation. Periodic membrane cleaning with 3% HCl applied for non-pretreated feed recovered initial permeate flux up to 80 - 95% and yielded highly purified distillate in long-term operation of MD system.

Advanced Treatment of the Municipal Wastewater by Lab-Scale Hybrid Ultrafiltration

In this study, hybrid ultrafiltration which involves adsorption onto activated carbon and/or coagulation was tested for the removal of ibuprofen, caffeine and diclofenac from the municipal wastewater treatment plant effluent (c0 = 2–3 µg/L). Ultrafiltration was tested in combination with powdered activated carbon dose of 5 mg/L separately or with coagulants (FeCl3, dose 4 mg Fe (III)/L and, natural coagulant isolated from bean seeds, dose 33 µL/L). In addition to the removal of organic micropollutants, the removal of As, Cr, Cu and Zn was also tested (c0~100 µg/L). The research was conducted on a laboratory pilot plant (capacity 30 L/h, in-out dead-end filtration, flux of 80 L/m2h). The best results were obtained for caffeine when adsorption on PAC is combined with a FeCl3 (removal efficiency 42–87%). The addition of a natural coagulant did not show benefits for the removal of organic micropollutants compared to the other tested processes, but both coagulants had similar effects on the content of metals and As Hybrid membrane processes proved to be the most efficient for Zn (44–87%) and Cr (33–87%) removal. The lowest efficiency was determined for As (˂19%). Ultrafiltration with PAC and coagulants removed 5–33% of effluent organic matter, depending on the type of coagulant; 57–87% of total nitrogen and PAC/FeCl3/UF was also partially effective for removing total phosphorus (11–39%).

Chemically Modified TiO2 Photocatalysts as an Alternative Disinfection Approach for Municipal Wastewater Treatment Plant Effluents

Among key issues in municipal wastewater treatment plants (MWTP) is the existence of pathogenic bacteria in the discarded effluents. Conventional disinfectants (ozone, UV irradiation, chlorine) have been insufficient in providing safe water due to the development of undesirable and noxious by-products. TiO2 comprises an attractive alternative to conventional methods because of its versatility and recently explored biocidal efficiency. As a result, within the framework of this study, chemically modified, visible active nanocrystalline TiO2 powders (N-TiO2, N,S-TiO2, and Ag@N-TiO2) were prepared via a low-cost, feasible sol-gel method for the treatment of real municipal wastewater effluents. Wastewater samples were acquired from the outlet of the treatment of Antiparos (Cyclades, Greece) MWTP during the summer period in which a great number of seasonal habitants and tourists usually visit the island, resulting in at least a doubling of the population. All synthesized powders were thoroughly characterized using various morphological and spectroscopic techniques, such as FE-SEM, XRD, micro-Raman, FTIR, DLS, UV-DRS, and XPS. Photocatalytic evaluation experiments were initially conducted towards Rhodamine B degradation under visible light irradiation. Among all studied powders, Ag@N-TiO2 indicated the highest efficiency, reaching total degradation (100%) of RhB within 240 min due to its smaller crystallite size (1.80 nm), enhanced surface area (81 m2g−1), and reduced energy band gap (Eg = 2.79 eV). The effect of the produced powders on the disinfection as assessed in terms of fecal indicator microorganisms (E. coli and total coliforms) inactivation was also examined in a semi-pilot scale-up photocatalytic reactor. Ag@N-TiO2 nanopowder was also found substantially more active for both groups of bacteria, leading to complete inactivation in less than 35 min, probably due to the higher production of H2O2/•OH, as emerged from the photocatalytic mechanism study. In addition, Ag@N-TiO2 nanoparticles demonstrated excellent photocatalytic and disinfection stability even after five subsequent recycling trials (8.34% activity loss and complete inactivation, respectively). The results of the present study demonstrate the feasibility for Ag@N-TiO2 to be utilized as a viable, eco-friendly approach for the photocatalytic pathogenic bacteria inactivation as an alternative disinfection approach for municipal wastewater treatment plant effluents with intense seasonal fluctuations in volume.

Microplastic emission trends in Turkish primary and secondary municipal wastewater treatment plant effluents discharged into the Sea of Marmara and Black Sea

Wastewater Treatment Plants (WWTPs) are recognized as one of the primary sources of microplastics, a class of contaminants that has lately gained attention. The quantity of MP that WWTPs release into the environment depends on several factors, including the treatment type, season, and population serviced. MP abundance and characterization were explored in 15 WWTP effluent waters, 9 discharged to the Black Sea from Türkiye and 6 to the Marmara Sea, with varying population densities and treatment methods. The mean MP abundance in primary treatment WWTPs (76.25 ± 49.20 MP L−1) was found to be substantially greater than that in secondary treatment WWTPs (20.57 ± 21.56 MP L−1) (p<0.05). MPs in WWTP effluent waters showed significant seasonal and spatial differences (Two Way ANOVA, Tukey, p<0.05). However, no positive correlation was detected between the population serviced and MP abundance in effluent waters. While the fiber was the dominant shape (49.5%) among MPs in effluent waters, ≈80% of the length was <1000 μm. MPs are classified into polymer types as follows: polyethylene terephthalate (34.9%) > polypropylene (32.4%) > polyethylene (19.9%) > polyamide (11%) > polystyrene (1.2%) > polyvinyl chloride (0.6%). With effluent waters from the WWTPs tested, we calculated that 1.24x1010 daily MPs are discharged into the Black Sea while 4.95x1010 MPs are into the Marmara Sea, for a combined annual discharge of 2.26x1013 MPs highlighting that WWTPs are key contributors of MP in Turkish coastal waters.

Removal of pharmaceutical pollutants from effluent by a plant-based metal–organic framework

Emerging organic contaminants (EOCs), such as pharmaceutical compounds, are of growing environmental concern, and there is a need to develop new materials and technologies for their efficient removal. Here we developed a highly porous and stable zirconium–ellagate framework, denoted SU-102, which was used to remove EOCs from water, including real municipal wastewater treatment plant effluent. SU-102 adsorbs cationic EOCs with particularly high efficiencies, and of the 17 pharmaceutical EOCs detected in wastewater treatment plant effluent, all 9 cationic species were removed with efficiencies of at least 79.0–99.6%, emphasizing the importance of framework charge on selectivity. As a second mechanism of EOC removal, SU-102 photodegraded the antibiotic sulphamethazine under visible light. SU-102 is synthesized from ellagic acid, an edible polyphenol building unit, highlighting the possibility of creating stable high-performance multi-functional materials from sustainably sourced plant-based components.

Bisphenol A removal in treated wastewater matrix at neutral pH using magnetic graphite intercalation compounds as persulfate activators.

Effluents of municipal wastewater treatment plants (WWTPs) are major sources for releasing contaminants of emerging concern (CECs) into the aquatic environment, which can result in negative effects on aquatic ecosystems and, as a consequence, on humans. Herein, the graphite intercalation concept was used to synthesize heterogeneous catalysts to degrade bisphenol A (BPA) as a model CEC in municipal WWTP effluents at neutral pH. The catalyst was synthesized using the simple molten salt method and showed several benefits, such as iron leaching prevention and stability in environmental matrices. Different methods were applied to describe the catalyst's structural characteristics. The proposed system removed 99.3% of BPA in 75 min using 2 g/L of the synthesized catalyst and 1.19 g/L (5 mM) persulfate at neutral pH. Quenching experiments showed that catalytic activities and BPA removals were significantly aided by both radical and non-radical pathways through the generation of free radicals and singlet oxygen (1 O2 ). Furthermore, the reuse of recycled synthesized catalyst was investigated on treated urban wastewater, and the results showed that the catalyst could degrade BPA from the wastewater in consecutive cycles, demonstrating its applicability under real conditions. PRACTITIONER POINTS: BPA was effectively removed from the effluents of municipal WWTPs at neutral pH. A new catalyst (magnetic GIC) was fabricated for heterogeneous catalytic systems. The catalyst activates persulfate to generate free radicals and 1 O2 , indicating that radical and non-radical pathways contribute to BPA degradation. The catalyst showed the ability to remove BPA even in the sixth cycle of use, demonstrating its stability and reusability.