Efficient Organic Light-emitting Diodes Research Articles

Modulation of Intermolecular Interactions in Organic Emitters for Highly Efficient Organic Light-Emitting Diodes.

The adverse aggregated-caused quenching (ACQ) problem of most electroluminescent materials existing in highly doped thin films is one of the key factors impeding the commercialization of high-efficiency organic light-emitting diodes (OLEDs) panel. Whereas, by delicately constructing and modulating moderate intermolecular interactions, some aggregates have been demonstrated to present distinct luminescent properties such as tunable emission spectra, improved photoluminescence quantum yields, different emission mechanism and enhanced horizontal transition dipole ratio (Θ) of emitting layer, providing feasible solution for ACQ problem. The luminescence from newly generated emissive state in aggregates is different from the traditional "isolated" molecules in organic electronics and will possess novel properties and applications. Herein, we summarize the different types of intermolecular interactions within emitter aggregates exhibiting distinct luminescent mechanisms, as well as their effects on photoluminescent and electroluminescent properties, offering reliable reference for the advancement of highly efficient OLEDs utilizing aggregated emitters.

Efficient near-infrared organic light-emitting diodes with emission from spin doublet excitons

The development of luminescent organic radicals has resulted in materials with excellent optical properties for near-infrared emission. Applications of light generation in this range span from bioimaging to surveillance. Although the unpaired electron arrangements of radicals enable efficient radiative transitions within the doublet-spin manifold in organic light-emitting diodes, their performance is limited by non-radiative pathways introduced in electroluminescence. Here we present a host–guest design for organic light-emitting diodes that exploits energy transfer with up to 9.6% external quantum efficiency for 800 nm emission. The tris(2,4,6-trichlorophenyl)methyl-triphenyl-amine radical guest is energy-matched to the triplet state in a charge-transporting anthracene-derivative host. We show from optical spectroscopy and quantum-chemical modelling that reversible host–guest triplet–doublet energy transfer allows efficient harvesting of host triplet excitons.

Fast Transfer of Triplet to Doublet Excitons from Organometallic Host to Organic Radical Semiconductors.

Spin triplet exciton formation sets limits on technologies using organic semiconductors that are confined to singlet-triplet photophysics. In contrast, excitations in the spin doublet manifold in organic radical semiconductors can show efficient luminescence. Here the dynamics of the spin allowed process of intermolecular energy transfer from triplet to doublet excitons are explored. A carbene-metal-amide (CMA-CF3) is employed as a model triplet donor host, since following photoexcitation it undergoes extremely fast intersystem crossing to generate a population of triplet excitons within 4ps. This enables a foundational study for tracking energy transfer from triplets to a model radical semiconductor, TTM-3PCz. Over 74% of all radical luminescence originates from the triplet channel in this system under photoexcitation. It is found that intermolecular triplet-to-doublet energy transfer can occur directly and rapidly, with 12% of triplet excitons transferring already on sub-ns timescales. This enhanced triplet harvesting mechanism is utilized in efficient near-infrared organic light-emitting diodes, which can be extended to other opto-electronic and -spintronic technologies by radical-based spin control in molecular semiconductors.

Rational Design of Coumarin-Based Hybridized Local and Charge-Transfer Blue Emitters for Solution-Processed Organic Light-Emitting Diodes.

Hybridized local and charge-transfer (HLCT) with the utilization of both singlet and triplet excitons through the "hot excitons" channel have great application potential in highly efficient blue organic light-emitting diodes (OLEDs). The proportion of charge-transfer (CT) and locally excited (LE) components in the relevant singlet and triplet states makes a big difference for the high-lying reverse intersystem crossing process. Herein, three novel donor (D)-acceptor (A) type HLCT materials, 7-([1,1'-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)-3-phenyl-1H-isochromen-1-one (pPh-7P), 7-([1,1'-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)-3-methyl-1H-isochromen-1-one (pPh-7M), and 6-([1,1'-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)-3-methyl-1H-isochromen-1-one (pPh-6M), were rationally designed and synthesized with diphenylamine derivative as donor and oxygen heterocyclic coumarin moiety as acceptors. The proportions of CT and LE components were fine controlled by changing the connection site of diphenylamine derivative at C6/C7-position and the substituent at C3-position of coumarin moiety. The HLCT characteristics of pPh-7P, pPh-7M, and pPh-6M were systematically demonstrated through photophysical properties and density functional theory calculations. The solution-processed doped OLEDs based on pPh-6M exhibited deep-blue electroluminescence with the maximum emission wavelength of 446 nm, maximum luminance of 8755 cd m-2, maximum current efficiency of 5.83 cd A-1, and maximum external quantum efficiency of 6.54 %. The results reveal that pPh-6M with dominant 1LE and 3CT components has better OLED performance.

Deterioration of Li-doped phenanthroline-based charge generation layer for tandem organic light-emitting diodes

Understanding the deterioration of the charge generation layer (CGL) is an uprising issue for efficient and stable tandem organic light-emitting diodes. Here, we comprehensively investigated the change in the electrical characteristics of Li-doped CGLs according to different stress conditions and compared the stability of Li diffusion in two phenanthroline-based electron transport materials. Through current density–voltage and capacitance-frequency measurements, it was revealed that electrical stress and thermal stress affect CGL’s electrical properties differently. Moreover, the exponential trap distribution model analysis informed that the Li diffusion is expedited toward narrowing depletion width in the CGL. Diffusion of Li and thermal effect to the diffusion was experimentally observed by X-ray photoelectron spectroscopy (XPS) depth profiling. We also evaluated variations in the operating voltage of tandem devices that differed only in nCGL. Overall, Li diffusion occurs more favorably in sparse Bphen film with weak binding energy rather than closely packed BPPB film with strong binding energy, which highlights that atomic geometry and morphological characteristics are crucial for the stability of tandem devices.

Deep-Blue and Fast Delayed Fluorescence from Carbene-Metal-Amides for Highly Efficient and Stable Organic Light-Emitting Diodes.

Linear gold complexes of the "carbene-metal-amide" (CMA) type are prepared with a rigid benzoguanidine amide donor and various carbene ligands. These complexes emit in the deep-blue range at 424 and 466nm with 100% quantum yields in all media. The deep-blue thermally activates delayed fluorescence originates from a charge transfer state with an excited state lifetime as low as 213ns, resulting in fast radiative rates of 4.7×106s-1. The high thermal and photo-stability of these carbene-metal-amide (CMA) materials enabled the authors to fabricate highly energy-efficient organic light-emitting diodes (OLED) in host-guest architectures. Deep-blue OLED devices with electroluminescence at 416 and 457nm with practical external quantum efficiencies of up to 23% at 100cdm-2 with excellent color coordinates CIE (x; y)=0.16; 0.07 and 0.17; 0.18 are reported. The operating stability of these OLEDs is the longest reported to date (LT50=1h) for deep-blue CMA emitters, indicating a high promise for further development of blue OLED devices. These findings inform the molecular design strategy and correlation between delayed luminescence with high radiative rates and CMA OLED device operating stability.

Inverted device architecture for high efficiency single-layer organic light-emitting diodes with imbalanced charge transport

Many wide-gap organic semiconductors exhibit imbalanced electron and hole transport, therefore efficient organic light-emitting diodes require a multilayer architecture of electron- and hole-transport materials to confine charge recombination to the emissive layer. Here, we show that even for emitters with imbalanced charge transport, it is possible to obtain highly efficient single-layer organic light emitting diodes (OLEDs), without the need for additional charge-transport and blocking layers. For hole-dominated emitters, an inverted single-layer device architecture with ohmic bottom-electron and top-hole contacts moves the emission zone away from the metal top electrode, thereby more than doubling the optical outcoupling efficiency. Finally, a blue-emitting inverted single-layer OLED based on thermally activated delayed fluorescence is achieved, exhibiting a high external quantum efficiency of 19% with little roll-off at high brightness, demonstrating that balanced charge transport is not a prerequisite for highly efficient single-layer OLEDs.

Narrow-emitting pyridoimidazole functionalized N-heterocyclic carbene based tetradentate Pt(II) complexes for blue phosphorescent organic light-emitting diodes

Two novel classes of N-heterocyclic carbene (NHC) based tetradentate Pt(II) complexes possessing bulky benzyl groups and pyridoimidazole ligands were designed and synthesized to produce efficient blue phosphorescent organic light-emitting diodes (PHOLEDs). Two blue Pt(II) complexes are reported, namely, platinum (II) [2-(3-(1-(4-(tert-butyl)benzyl)-1H-imidazo [4,5-b]pyridin-3(2H)-yl)phenoxy)-9-(pyridin-2-yl)-9H-carbazole] (Pt(t-BuBnOCzPy)) and platinum (II) [3-(3-(1-benzyl-1H-imidazo [4,5-b]pyridin-3(2H)-yl)phenoxy)-9-(4-(tert-butyl)pyridin-2-yl)-9H-carbazole] (Pt(BnOCz4t-BuPy)), respectively. Notably, pyridoimidazole and bulky benzyl groups efficiently reduced steric hindrance, vibrational peaks, and intermolecular interactions. The photophysical and electrochemical properties of the two Pt(II) complexes were analytically examined experimentally and theoretically. The complexes exhibited blue electroluminescence (EL) emission at 466 nm with a small full-width half maximum (FWHM) of 26 nm and completely suppressed vibrational emission peaks. Blue PHOLEDs, at 5 wt% Pt(t-BuBnOCzPy) and Pt(BnOCz4t-BuPy) doping ratios exhibited maximum external quantum efficiencies (EQEmax) of 19 and 18.6 %, maximum power efficiencies (PEmax) of 25.5 and 24.9 cd m−2, and maximum current efficiencies (CEmax) of 24.3 and 24.3 cd m−2 with Commission International de I'Eclairage (CIEx,y) color coordinates of (0.13, 0.17) and (0.13, 0.17), respectively. These superior results suggest that the designed benzylated NHC pyridoimidazole tetradentate Pt(II) complexes provide a novel means of reducing steric hindrance and intermolecular interactions.

Development and synthesis of anthracene-based fluorescence material for non-doped OLEDs

Efficient organic blue materials are essential to develop highly efficient organic light-emitting diodes. However, there is a challenge to commercialize efficient blue compounds due to the fundamentally wide band gap and the lack of pure blue emitters. In this study, the new anthracene-based fluorescent emitter, (4-(10-(4-(9H-carbazol-9-yl)-2-methylphenyl)anthracen-9-yl)-3-methylphenyl)diphenylphosphine oxide (CZm-AN-mPO) was designed and synthesized. The thermal, photophysical and electrochemical properties of the CZm-AN-mPO were systematically investigated. The CZm-AN-mPO exhibits a deep-blue emission at 425 nm and AIE property with a relatively narrow full-width at half maximum of 34 nm. The CZm-AN-mPO based non-doped devices show pure blue emission. The optimized OLEDs indicated maximum external efficiencies of 4.3% and 4.2% at emission layer thickness of 20 nm and 40 nm, respectively.

ExROPPP: Fast, accurate, and spin-pure calculation of the electronically excited states of organic hydrocarbon radicals.

Recent years have seen an explosion of interest in organic radicals due to their promise for highly efficient organic light-emitting diodes and molecular qubits. However, accurately and inexpensively computing their electronic structure has been challenging, especially for excited states, due to the spin-contamination problem. Furthermore, while alternacy or "pseudoparity" rules have guided the interpretation and prediction of the excited states of closed-shell hydrocarbons since the 1950s, similar general rules for hydrocarbon radicals have not to our knowledge been found yet. In this article, we present solutions to both of these challenges. First, we combine the extended configuration interaction singles method with Pariser-Parr-Pople (PPP) theory to obtain a method that we call ExROPPP (Extended Restricted Open-shell PPP) theory. We find that ExROPPP computes spin-pure excited states of hydrocarbon radicals with comparable accuracy to experiment as high-level general multi-configurational quasi-degenerate perturbation theory calculations but at a computational cost that is at least two orders of magnitude lower. We then use ExROPPP to derive widely applicable rules for the spectra of alternant hydrocarbon radicals, which are completely consistent with our computed results. These findings pave the way for highly accurate and efficient computation and prediction of the excited states of organic radicals.

Multifunctional Deep-Blue Thermally Activated Delayed Fluorescence Based on an Oxygen-Bridged Boron Acceptor for Highly Efficient Organic Light-Emitting Diodes.

Until now, thermally activated delayed fluorescence (TADF) materials based on bridged boron-based acceptors have been primarily developed as dopants. However, in this study, we synthesized and characterized multifunctional deep-blue TADF materials─t-OBO-DMAC and t-OBO-DPAC─using bridged boron-based acceptors in combination with dimethylacridine or diphenylacridine as donors. These materials serve as both dopants and hosts. Theoretical calculations and experimentally measured photophysical properties of t-OBO-DMAC reveal a smaller singlet-triplet energy difference, higher photoluminescence quantum yield, and more efficient reverse intersystem crossing compared to t-OBO-DPAC. When evaluated as TADF emitters, t-OBO-DMAC and t-OBO-DPAC exhibited maximum external quantum efficiency (EQE) of 14.4 and 7.3% with deep-blue color coordinates of (0.14, 0.11) and (0.15, 0.07), respectively. Both materials were further assessed as hosts in various configurations, including host-only, TADF, phosphorescent, and phosphor-sensitized fluorescence (PSF)-emitting systems. Notably, t-OBO-DMAC demonstrated a high maximum EQE of 13.9% with deep-blue color coordinates of (0.15, 0.07) in a nondoped host-only device. Remarkably, both materials achieved EQEs exceeding 20% in the PSF devices. Our study marks a critical advancement in the field that breaks the conventional boundaries of the dopant and host and demonstrates unprecedented multifunctionalities for advanced organic light-emitting diodes.

New Phenanthro[9,10-d]oxazole-Based Fluorophores with Hybridized Local and Charge-Transfer Characteristics for Highly Efficient Blue Non-Doped OLEDs with Negligible Efficiency Roll-Off.

It is vital to develop highly efficient non-doped blue organic light-emitting diodes (OLEDs) with high color purity and low-efficiency roll-off for applications in display and lighting. Herein, two blue D-A fluorophores TPA-PO and TPA-DPO are designed and synthesized, in which phenanthro[9,10-d]oxazole (PO) acts as the acceptor and triphenylamine as the donor. TPA-PO and TPA-DPO display good thermal stability and efficient luminescence efficiency in neat film. Results based on photophysical property and theoretical calculation demonstrate that TPA-PO and TPA-DPO possess the hybridized local and charge-transfer (HLCT) feature, which can utilize the triplet exciton to achieve highly efficient electroluminance (EL). The non-doped OLEDs with TPA-PO/TPA-DPO as pure emissive layer show the uniform EL emission peak at 468 nm, corresponding to CIE coordinates of (0.168, 0.187) and (0.167, 0.167), respectively. The TPA-DPO-based non-doped OLEDs provide the maximum external quantum efficiency (EQE) of 7.99 % and high exciton utility efficiency of 48.4 %~72.6 %. Moreover, the TPA-DPO-based device exhibits low-efficiency roll-off, still maintaining the EQE of 6.03 % at the high luminance of 5000 cd m-2. Those findings state clearly that PO is a promising building block of blue fluorophore with a potential HLCT feature to be applied in non-doped OLEDs.

A Boron, Nitrogen, and Oxygen Doped π-Extended Helical Pure Blue Multiresonant Thermally Activated Delayed Fluorescent Emitter for Organic Light Emitting Diodes That Shows Fast kRISC Without the Use of Heavy Atoms.

Narrowband emissive multiresonant thermally activated delayed fluorescence (MR-TADF) emitters are a promising solution to achieve the current industry-targeted color standard, Rec. BT.2020-2, for blue color without using optical filters, aiming for high-efficiency organic light-emitting diodes (OLEDs). However, their long triplet lifetimes, largely affected by their slow reverse intersystem crossing rates, adversely affect device stability. In this study, a helical MR-TADF emitter (f-DOABNA) is designed and synthesized. Owing to its π-delocalized structure, f-DOABNA possesses a small singlet-triplet gap, ΔEST, and displays simultaneously an exceptionally faster reverse intersystem crossing rate constant, kRISC, of up to 2 × 106 s-1 and a very high photoluminescence quantum yield, ΦPL, of over 90% in both solution and doped films. The OLED with f-DOABNA as the emitter achieved a narrow deep-blue emission at 445nm (full width at half-maximum of 24nm) associated with Commission Internationale de l'Éclairage (CIE) coordinates of (0.150, 0.041), and showed a high maximum external quantum efficiency, EQEmax, of ≈20%.

Bright, efficient, and stable pure-green hyperfluorescent organic light-emitting diodes by judicious molecular design

To fulfill ultra-high-definition display, efficient and bright green organic light-emitting diodes with Commission Internationale de l’Éclairage y-coordinate ≥ 0.7 are required. Although there are some preceding reports of highly efficient devices based on pure-green multi-resonance emitters, the efficiency rolloff and device stabilities for those pure-green devices are still unsatisfactory. Herein, we report the rational design of two pure-green multi-resonance emitters for achieving highly stable and efficient pure-green devices with CIEx,ys that are close to the NTSC and BT. 2020 standards. In this study, our thermally activated delayed fluorescence OLEDs based on two pure-green multi-resonance emitters result in CIEy up to 0.74. In hyperfluorescent device architecture, the CIExs further meet the x-coordinate requirements, i.e., NTSC (0.21) and BT. 2020 (0.17), while keeping their CIEys ~ 0.7. Most importantly, hyperfluorescent devices display the high maximum external quantum efficiencies of over 25% and maximum luminance of over 105 cd m−2 with suppressed rolloffs (external quantum efficiency of ~20% at 104 cd m−2) and long device stabilities with LT95s of ~ 600 h.

Novel indolocarbazole-based bipolar host materials for fabricating green phosphorescent organic light-emitting diodes with high efficiency and low roll-off

Herein we report two novel host materials, viz., 2-(dibenzo [b,d]furan-2-yl)indolo [3,2,1-jk]carbazole (ICz-DBF) and 3-(indolo [3,2,1-jk]carbazol-2-yl)furo [2,3-b:5,4-b']dipyridine (ICz-PFP), for fabricating highly stable and efficient organic light-emitting diodes (OLEDs). Green phosphorescent OLEDs (PhOLEDs) based on ICz-DBF and ICz-PFP exhibited less efficiency roll-off than those based on 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP) host, and especially, the ICz-DBF-based device achieved a high external quantum efficiency (EQE) of 20.5 %. Bipolar hosts composed of indolocarbazole (ICz) exhibit strong molecular rigidity, high triplet energy, and fast electron transport properties; therefore, they act as acceptors, but dibenzofuran (DBF) and dipyridofuran (PFP) substitutions endow them with controlled electron-donating characteristics. The bipolar properties of the new host materials were demonstrated by single-carrier device analysis, confirming the effectiveness of our research strategy for developing hosts for high-quality OLEDs.

Role of Bridging Groups in Regulating the Luminescence and Charge Transfer Properties of Thermally Activated Delayed Fluorescence Molecules: A Theoretical Perspective.

Organic emitters with a simultaneous combination of aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) characteristics are in great demand due to their excellent comprehensive performances toward efficient organic light-emitting diodes (OLEDs), biomedical imaging, and the telecommunications field. However, the development of efficient AIE-TADF materials remains a substantial challenge. In this work, light-emitting properties of two AIE-TADF molecules with different bridging groups ICz-BP and ICz-DPS are theoretically investigated in the solid state with the combined quantum mechanics/molecular mechanics (QM/MM) method and the thermal vibration correlation function (TVCF) theory. The research indicates that the C═O bridging bond in ICz-BP is more favorable than the S═O bridging bond in ICz-DPS for enhancing the planarity of the acceptor, increasing conjugation, and thereby elevating the transition dipole moment density. Simultaneously, the stacking pattern of ICz-BP in the solid facilitates a reduction in energy gap between S1 and T1 (ΔEST), achieving rapid reverse intersystem crossing rate (kRISC). Furthermore, compared to toluene, the stacking patterns of ICz-BP and ICz-DPS in the solid effectively suppress the out-of-plane wagging vibration of the acceptor, thereby inhibiting the loss of nonradiative energy in the excited state and realizing aggregation-induced emission. Moreover, the charge transport properties of both electrons and holes in ICz-BP are found to be higher than the corresponding rates in ICz-DPS, attributed to the smaller internal reorganization energy of ICz-BP in the solid state. Additionally, the calculations reveal a more balanced charge transport characteristic in ICz-BP, contributing to efficient exciton recombination and emission and ultimately mitigating efficiency roll-off. Based on these computational results, we aim to unveil the relationship between molecular structure and light-emitting properties, aiding in the design and development of efficient AIE-TADF devices.

Highly efficient fluorescent and hybrid white organic light-emitting diodes based on a bimolecular excited system: publisher's note.

This publisher's note contains a correction to Opt. Lett.48, 5771 (2023)10.1364/OL.506371.

Nonuniform Degradation in the Efficiency of Organic Light-Emitting Diodes

Nonuniform Degradation in the Efficiency of Organic Light-Emitting Diodes

Efficient narrowband organic light-emitting diodes based on B,O embedded multi-resonance emitters containing B-N covalent bonds

Multi-resonance (MR) thermally activated delayed fluorescence (TADF) materials emerge rapidly in recent years, and are expected to be an effective solution for ultra-high-resolution displays. Solving the main issues of low yield and dangerous lithium reagent for synthesis, extending the material diversity and figuring out the structure–activity relationship would all be beneficial to promote their commercialization. Herein, two easy-to-access MR-TADF emitters, BO-N1 and BO-N2, are constructed by integrating B,O-based MR polycyclic aromatic with B-N covalent bonds. The B-N covalent bonds are formed through simple amine-directed borylation with high yield over 90 %, which significantly improves yield, simplifies procedure and effectively avoids hazardous lithiation compared to the traditional methods. Two emitters exhibit bright green emissions in doped films with full width at half maximum (FWHM) of 28 and 24 nm, and high photoluminescence quantum yields (PLQY) of 85 % and 90 %. The green electroluminescent device of BO-N2 achieves narrow-band spectrum with FWHM of 29 nm, maximum brightness of 10480 cd m−2 and external quantum efficiency (EQE) of 20.1 %.

Inkjet-printed multilayer structure for low-cost and efficient OLEDs

Inkjet printing is considered a key technology in the fabrication of organic light-emitting diodes (OLEDs), but achieving a fully inkjet-printable OLED structure is still a challenge. Here, we propose the fabrication of OLEDs with an inkjet-printed multilayer structure (i.e. anode/hole injection layer (HIL)/electron blocking layer (EBL)/emitting layer (EML)) by properly developing new HIL and EBL inks to achieve uniform and homogeneous printed thin films. In the fabricated multilayer device, the dissolution process of the EBL, which occurs during the printing of the EML, creates a blurred interface, resulting in device performance that achieves maximum current efficiencies of 20 cd/A and 7 cd/A with ITO and printed polymeric anode, respectively. With the aim of simplifying the structure of the device and mimicking the formation of such a blurred interface, another printed multilayer structure (i.e. anode/printed HIL/printed EBL:EML) was proposed, achieving maximum current efficiencies of 13 and 6 cd/A with ITO and polymeric anode, respectively. Such results represent a compromise between simplifying the fabrication process and achieving good electro-optical properties and thus represent a further step towards the fabrication of a fully inkjet-printed ITO-free OLED.