Ammonia Removal Efficiency Research Articles

Influence of Ammonia Concentration on Struvite Production and Ammonia Removal Efficiency in Continuous Flow Crystallizer Reactor

Influence of Ammonia Concentration on Struvite Production and Ammonia Removal Efficiency in Continuous Flow Crystallizer Reactor

Comparative Study of Ammonium and Orthophosphate Removal Efficiency with Natural and Modified Clay-Based Materials, for Sustainable Management of Eutrophic Water Bodies

Comparative Study of Ammonium and Orthophosphate Removal Efficiency with Natural and Modified Clay-Based Materials, for Sustainable Management of Eutrophic Water Bodies

Ammonia removal and nitrogen preferences evaluation of indigenous Malaysian microalga Halamphora sp. on white shrimp Penaeus vannamei wastewater

Ammonia is ubiquitous in aquaculture systems and its removal is important for maintaining water quality and the health of the cultured animals. Microalgae are effective at removing ammonia from water, but the effectiveness of different microalgae species may vary. In this study, indigenous Malaysian microalgae isolated from shrimp ponds were screened for their ability in removing ammonia from synthetic culture media. The most efficient microalga’s nitrogen preferences and its growth and nitrogen removal in the early and late stages of shrimp culture wastewater were explored. It was found that four microalgae species namely Halamphora sp. BpSpD2, Chaetoceros sp. BpSpD3, Chlorella sp. BpSpG3 and Desertifilum sp. BpSpC1 were able to eradicate ammonia after 14 days of cultivation. Further investigation showed that Halamphora sp. BpSpD2 was able to remove 100 % ammonia within 5 days of culture. The nitrogen preferences of Halamphora sp. BpSpD2 indicated a preference for ammonia over nitrate as evidenced by the higher growth and removal efficiency of the treatments. Nitrogen removal efficiency of over 70 % was observed in treating 4 to 12 mg L-1 of TAN and nitrate. When tested in shrimp-cultured wastewater, Halamphora sp. showed a higher growth and 100% ammonia removal efficiency in the late stage of shrimp-culture wastewater. It also effectively removed 59% to 80% of nitrogen throughout both the early and late stages of shrimp culture wastewater. The results suggested that the microalga Halamphora sp. BpSpD2 has a significant potential to treat the effluent of an aquaculture system containing high concentrations of ammonia and nitrate.

Molecular ecological insights into the synergistic response mechanism of nitrogen transformation, electron flow and antibiotic resistance genes in aerobic activated sludge systems driven by sulfamethoxazole and/or trimethoprim stresses

The prevalence of antibiotics poses a serious challenge to biological nitrogen removal in wastewater. In this study, the effects of sulfamethoxazole and/or trimethoprim (15 mg/L∼30 mg/L) on treatment performance, nitrogen transformation and antibiotic resistance genes (ARGs) were investigated in aerobic activated sludge systems to elucidate the metabolic mechanism under high antibiotic stress. 15 mg/L single antibiotic stress improved total nitrogen removal performance due to the persistence of nitrifiers and enrichment of denitrifiers, with an optimum removal efficiency of 96.5%. Up-regulation of all denitrifying genes, coupled with enhanced electron transfer of Complex II and III, contributed to the emergence of aerobic denitrification. The increased expression of antioxidant genes also alleviated intracellular pressure. Whereas combined antibiotic stress induced the significant down-regulation of denitrifying bacteria and genes (nirKS and nosZ), and suppressed the electron supply for denitrification by restraining genes related to Complex Ⅰ and energy supply by tricarboxylic acid cycle, driving the collapse of activated sludge system, with ammonia and total nitrogen removal efficiencies dropping to below 40% and 20%, respectively. The dominant genera in system changed from TM7a to Thiothrix and Sphaerotilus with increasing antibiotic concentration and type. Moreover, antibiotic stress promoted a slight enrichment of ARGs, especially those encoding efflux mechanisms. Cooperative relationships (> 93%) dominated among ARGs, and Klebsiella was identified as the crucial host. ARGs regulating antibiotic efflux were more likely to be co-expressed with functional genes. These results may provide a theoretical basis for establishing promising strategies to mitigate antibiotic-caused process deterioration.

Recovery of ferrous ammonium phosphate fertilizer from source-separated urine by electrocoagulation using response surface methodology (RSM)

This study focuses on the recovery of ferrous ammonium phosphate (FAP) from source-separated urine, presenting significant findings in waste management using the electrocoagulation method. The optimization of parameters such as current density (100-300A/m2), initial pH (5-9), and process time (2-6h) was carried out using the Box-Behnken method. The results revealed important insights regarding chemical oxygen demand (COD), ammonium (NH4+), and phosphate (PO4-3) removal efficiency. For instance, under a pH of 9 and a processing time of 4h, the COD removal efficiency reached up to 56.4%. The precipitation of NH4+ was achieved to be 70% under a pH of 7 and a current density of 100A/m². Moreover, the effects of these parameters on the removal of phosphate ions and the formation of ferrous ammonium phosphate (FAP) were observed. The characterization of the recovered FAP was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDX) analyses, providing a detailed examination of the material's structure. As a result, optimizing pH and current density in FAP production played a critical role in the effective removal of pollutants from source-separated urine. These findings contribute significantly to sustainable waste management and recovery processes.

Sludge enrichment and intermittent gradient aeration: Modulating microbial communities for start-up of partial nitrification in a sequencing batch reactor (SBR)

A novel approach has been proposed integrating sludge enrichment with intermittent gradient aeration to achieve partial nitrification (PN). Results indicated that this method suppressed nitrite-oxidizing bacteria (NOB) activity while maintained ammonia-oxidizing bacteria (AOB) activity, achieving an 82.87 % nitrite accumulation rate (NAR) during startup. During stable operation, specific ammonia oxidation rate and specific nitrite oxidation rate reached 18.44 and 2.67 mg N/g MLVSS/h, respectively. Shortening anoxic time from 30 to 20 min enhanced ammonia removal efficiency by 12.5 %, increasing NAR to 89.55 %. Further reduction to 5 min yielded 38.46 % and 91.88 %, respectively. AOB abundance enriched from 0.62 % to 22.28 %, with the AOB-to-NOB ratio jumping from 0.22 to 59.58. This research presented a rapid and effective strategy for achieving PN.

Optimizing anoxic/oxic intervals in intermittent aeration for STHP-AD filtrate treatment: Restoring partial nitrification and community dynamics in the SPNAD system

Currently, partial nitrification (PN) processes are commonly used to improve efficiency in high ammonia nitrogen wastewaters. However, initiating and restoring damaged PN performance is crucial for optimizing nitrogen removal efficiency without the use of chemical additives. In this study, a simultaneous partial nitrification and denitrification coupled with anammox (SPNAD) sequencing batch biofilm reactor was constructed to treat anaerobic digestion after sludge thermal hydrolysis pretreatment (STHP-AD) filtrate. The PN performance was successfully recovered through optimizing the operation mode of anoxic/oxic alternation within 120 days. Result showed that Nitrosomonas increased from 0.68 % to 3.43 %, while Nitrospira decreased to 0.06 %. The PN recovery also promoted anammox, with the only anammox bacterium of Candidatus Brocadia, detected in the mixing and biofilm sludge of 1.73 % and 1.41 %, respectively. The autotrophic denitrifying bacteria Thermomonas (increasing from 0.47 % to 23.85 %) and Truepera (rising from 2.31 % to 6.54 %) rapidly accumulated. After adjusting to the anoxic/oxic alternation ratio, the hydraulic retention time was shortened from 50 h to 37.5 h, and the oxic time was reduced to half of the initial operation. The PN recovery and anammox enrichment resulted in improving nitrogen removal approximately 20 %. Eventually, the SPNAD system realizes stable and efficient nitrogen removal with the influent nitrogen loading rate of 0.43 kgN/(m3·d), the ammonium removal efficiency of 94.73 ± 3.27 %, and the nitrogen removal efficiency of 72.98 ± 1.27 %. In this study, a new strategy using intermittent aeration while appropriately extending the oxic time was proposed to restore the system’s ability to treat STHP-AD filtrate after PN disruption.

Enhanced anammox-mediated nitrogen removal in bioelectrochemical systems at prolonged negative electrode potentials.

Bioelectrochemical anaerobic ammonium oxidation (anammox) systems allow eco-friendly removal of nitrogen from reject wastewater coming from biogas processing as the anammox bacteria have previously shown to have c-type cytochromes acting in the extracellular electron transport (EET) mechanism between the bacteria and electrode. The anammoxosome compartment present in anammox bacteria features a highly curved membrane and contains tubular structures along with electron-dense particles that contain iron, which could enhance the process of EET and enhance nitrogen removal by properly applied potentials. In this study, nitrogen removal was investigated in the electrostimulated anammox nitrogen removal (EANR) cells operated comparatively at open circuit and at applied potentials of - 300mV, - 500mV, and - 700mV vs. Ag/AgCl. At peak performance (at - 700mV vs. Ag/AgCl), the EANR showed up to 140% higher specific nitrogen removal rate (11.2 ± 0.3g N/m2/day) compared to the control reactors without applied potential (8.3 ± 0.2g N/m2/day). The microbial community on the cathode with the applied potential had a higher relative proportion of unclassified Candidatus Brocadia (7.5%) compared to inoculum (> 0.01%), in contrast to cathode without potential (0.74%) and control (0.2%). The EANR system demonstrated to achieve ammonium and nitrite removal efficiencies of 91% and 53%, respectively, during a 24-h test cycle from an initial TN concentration of ~ 100mg N/L. After 150h, it achieved complete removal of all nitrogen compounds, reaching a 100% removal efficiency. The EANR would be very useful in the establishment of field-scale bilateral anammox-bioelectrochemical technology combining microbial fuel cell bioanodes and EANR biocathodes for wastewater treatment.

Optimizing Synthesis of Anionic Surfactant‐Modified Carbon Black for Enhanced Ammonium Adsorption

The increasing levels of ammonium in wastewater pose serious environmental issues, highlighting the urgent need for effective adsorbents to facilitate its removal. Although conventional biological treatment methods have certain drawbacks, adsorption using carbonaceous materials, such as carbon black produced from waste tires, presents a promising alternative for ammonium removal. However, the use of these materials has not been thoroughly investigated. This study focuses on optimizing the synthesis of carbon black modified with anionic surfactants to improve its capacity for ammonium adsorption. Utilizing Response Surface Methodology (RSM) and a Box‐Behnken design, the optimization process examined key variables, including reaction time, surfactant concentration, carbon black dosage, and surfactant type. Comprehensive characterization of the adsorbent was conducted to analyze its surface properties, functional groups, morphology, and elemental composition. The regression models produced highly accurate results with an R2 value of 0.9437. The optimal synthesis conditions were identified as a 12.30‐hour reaction time, a surfactant concentration of 8 mmol/L of sodium dodecylbenzene sulfonate, and a carbon black dosage of 30 g, achieving an ammonium removal efficiency of 84.80%. This study offers a scalable solution for ammonium removal in wastewater, promising practical applications and future sustainable waste management research.

Pengaruh Waktu Aerasi terhadap Peningkatan Efisiensi Penghilangan Amonia di Air Lindi pada Sistem Ammonia Stripper

Talang Gulo Final Disposal Site (FDS) has a Leachate Treatment Plant (LTP) equipped with denitrification and nitrification facilities which function to reduce the concentration of ammonia (NH3) in leachate according to predetermined environmental quality standards. Research samples were taken in the form of leachate using the grab sampling method in accordance with SNI 6989.59:2008. The results of the research showed that the aeration time for the ammonia stripper of 3 hours, 6 hours and 12 hours both gave the highest value for the ammonia stripper efficiency percentage variable. The highest ammonia removal efficiency is aeration time of 12 hours. However, if we look at the operating efficiency of the ammonia stripper, the removal of ammonia by using an aeration time of 12 hours does not provide a significant improvement when compared to a treatment with an aeration time of 6 hours. This means that the operating time is 6 hours faster, the 6 hour variation can provide an ammonia removal efficiency of more than 90%

Removal of sulfamethoxazole in an algal-bacterial membrane aerated biofilm reactor: Microbial responses and antibiotic resistance genes

Antibiotics are frequently detected in wastewater, but often are poorly removed in conventional wastewater treatment processes. Combining microalgal and nitrifying bacterial processes may provide synergistic removal of antibiotics and ammonium. In this research, we studied the removal of the antibiotic sulfamethoxazole (SMX) in two different reactors: a conventional nitrifying bacterial membrane aerated biofilm reactor (bMABR) and algal-bacterial membrane aerated biofilm reactor (abMABR) systems. We investigated the synergistic removal of antibiotics and ammonium, antioxidant activity, microbial communities, antibiotic resistance genes (ARGs), mobile genetic elements (MGEs), and their potential hosts. Our findings show that the abMABR maintained a high sulfamethoxazole (SMX) removal efficiency, with a minimum of 44.6 % and a maximum of 75.8 %, despite SMX inhibition, it maintained a consistent 25.0 % ammonium removal efficiency compared to the bMABR. Through a production of extracellular polymeric substances (EPS) with increased proteins/polysaccharides (PN/PS), the abMABR possibly allowed the microalgae-bacteria consortium to protect the bacteria from SMX inactivation. The activity of antioxidant enzymes caused by SMX was reduced by 62.1–98.5 % in the abMABR compared to the bMABR. Metagenomic analysis revealed that the relative abundance of Methylophilus, Pseudoxanthomonas, and Acidovorax in the abMABR exhibited a significant positive correlation with SMX exposure and reduced nitrate concentrations and SMX removal. Sulfonamide ARGs (sul1 and sul2) appeared to be primarily responsible for defense against SMX stress, and Hyphomicrobium and Nitrosomonas were the key carriers of ARGs. This study demonstrated that the abMABR system has great potential for removing SMX and reducing the environmental risks of ARGs.

Enhancement of cold-adapted heterotrophic nitrification and denitrification in Pseudomonas sp. NY1 by cupric ions: Performance and mechanism

Cupric ions can restrain biological nitrogen removal processes, which comprise nitrite reductase and nitric oxide reductase. Here, Pseudomonas sp. NY1 can efficiently perform heterotrophic nitrification and aerobic denitrification with cupric ions at 15 °C. At optimal culturing conditions, low cupric ion levels accelerated nitrogen degradation, and ammonium and nitrite removal efficiencies increased by 2.33%–4.85% and 6.76%–12.30%, respectively. Moreover, the maximum elimination rates for ammonium and nitrite increased from 9.48 to 10.26 mg/L/h and 6.20 to 6.80 mg/L/h upon adding 0.05 mg/L cupric ions. Additionally, low cupric ion concentrations promoted electron transport system activity (ETSA), especially for nitrite reduction. However, high concentrations of cupric ions decreased the ETSA during nitrogen conversion processes. The crucial enzymes ammonia monooxygenase, nitrate reductase, and nitrite reductase possessed similarly trends as ETSA upon exposure to cupric ion. These findings deepen the understanding for the effect of cupric ions on nitrogen consumption and bioremediation in nitrogen-polluted waters.

Efficient removal of ammonia from aqueous solution using coal-based carbon membrane via electrochemical oxidation in the present of chloride ion

To tackle the escalating issue of ammonia nitrogen water pollution, developing efficient removal technologies holds paramount significance. In this work, an electrochemical membrane reactor (EMR) was constructed for the decontamination of ammonia nitrogen wastewater using the coal-based carbon membrane (CCM) as the flow-through anode. The removal efficiency and degradation mechanism of ammonia nitrogen by EMR during the treatment were investigated. It was found that, under applied voltage and in the presence of chloride ions, the CCM exhibited excellent chlorine evolution performance, and as a result, the EMR had excellent ammonia nitrogen removal efficiency. The removal of ammonia nitrogen by the flow-through EMR was following the pseudo-first-order kinetics. Analysis revealed that various operating parameters, including applied voltage, chloride ion concentration, flow rate, pH value, and initial ammonia concentration, all significantly influenced the ammonia nitrogen treatment performance of EMR. At optimal operation conditions (feed concentration of 30 mg/L, applied voltage of 2.8 V, NaCl concentration of 0.1 mol/L and flow rate of 2 ml/min), the EMR achieved a removal rate of 100 % for ammonia nitrogen with a low energy consumption (EC) of 0.0380 kW•h/g-NH4-N. The degradation mechanism analysis revealed that the primary means of ammonia removal relied on indirect oxidation mediated by OCl·, which was generated by the oxidation of Cl- on the surface of CCM within the solution under the influence of the electric field. Furthermore, the EMR demonstrated good applicability across various water matrices. In conclusion, the EMR holds considerable potential for the decontamination of ammonia nitrogen-containing wastewater.

Substrate preference of Tetrasphaera in dual PAOs synergistic EBPR system and its phosphorus removal performance

In this study, an alternated anaerobic/aerobic sequencing batch reactor (SBR) was employed to investigate the effect of the substrate conversion from casein hydrolysate (Cas aa) to a mixture of amino acids (glutamate, aspartate, glycine and proline) on the efficacy of nitrogen and phosphorus removal in an enhanced biological phosphorus removal (EBPR) system characterized by dual polyphosphate-accumulating organisms (PAOs), mainly focusing on the substrate preference of fermentative PAOs. The results indicated that a stable removal efficiency was found to be above 90 % as the substrate was converted to the mixture of amino acids. Meanwhile, the removal efficiency of ammonium eventually increased to over 95 % in stage III, despite an increase of ammonia nitrogen by hydrolysis with the rising proportion of mixed amino acids in influent. Moreover, shortening the anaerobic duration did not significantly affect the phosphorus removal performance, even enhancing anaerobic phosphorus release capacity. Nevertheless, the ammonia nitrogen removal was influenced. 16 s rRNA high-throughput sequencing results demonstrated that the detected fermentative PAO like Tetrasphaera in the EBPR system exhibited a clear preference for utilizing mixed amino acids and could cooperate with traditional PAO like Accumulibacter for phosphorus removal. In addition, the fermentation of amino acids mixture by Tetrasphaera was more pronounced and its abundance increased under the condition of a shorter anaerobic duration, leading to a relatively stable and high abundance of Accumulibacter in the presence of sufficient substrates from Tetrasphaera. However, considering the nitrogen removal performance and steady operation of the EBPR system, a longer anaerobic duration was more reasonable.

Response of nitrifiers to gradually increasing pH conditions in a membrane nitrification bioreactor: Microbial dynamics and alkali-resistant mechanism

Nitrification and nitrifiers are pH-sensitive especially under the alkaline environment in the activated sludge system. However, it is unclear how nitrifiers and nitrification respond to long-term alkaline environment. This study employed a continuous flow membrane nitrification bioreactor to investigate the dynamics of nitrification efficiency and microbial community adaptation under a 320-day alkaline operation. Results showed that activated sludge adapted remarkably to a progressive increase in pH from 7.5 to 10.0, achieving robust nitrification with average ammonia removal efficiencies of 96.6 ± 2.2%. Subsequently, an integrated alkali-resistant mechanism of nitrifiers was proposed. Specifically, under the long-term operation of pH 10.0, certain bacteria secreted enhanced extracellular acidic polysaccharides (i.e., up to 10.95 ± 0.27 mg·g−1 MLVSS in soluble extracellular polymeric substances (EPS)) and acidic organic compounds (e.g., humic acids increased by 1.47-fold in tightly bounded EPS) to neutralize external alkalinity. Moreover, significant enrichments in both the ammonia oxidizing bacteria Nitrosomonas (by 1.3%) and the nitrite oxidizing bacteria Nitrospira (by 5.4%) were observed in a 170-day operation of pH 10.0 condition. Meanwhile, norank_f__JG30-KF-CM45 (2.0%) and Rhodobacter (0.9%) also contributed to ammonia removal at pH 10.0. On the cellular-level, bacteria enabled to maintain intracellular pH stabilization primarily through cation/proton antiporters, evidenced by significant increases in NhaA, TrkA and KefB activities by 98.0%, 151.7% and 115.2%, respectively. A 43.1% increase in carbonic anhydrase activity also facilitated consumption of aqueous OH− ions through biomineralization, leading to CaCO3 deposition on microbial surface. These findings further enhanced understandings of physiological adaptation of nitrifiers in the long-term alkaline activated sludge system.

Comammox rather than AOB dominated the efficient autotrophic nitrification-denitrification process in an extremely oxygen-limited environment

The discovery of complete ammonia oxidizer (comammox) has challenged the traditional understanding of the two-step nitrification process. However, their functions in the oxygen-limited autotrophic nitrification-denitrification (OLAND) process remain unclear. In this study, OLAND was achieved using comammox-dominated nitrifying bacteria in an extremely oxygen-limited environment with a dissolved oxygen concentrations of 0.05 mg/L. The ammonia removal efficiency exceeded 97 %, and the total nitrogen removal efficiency reached 71 % when sodium bicarbonate was used as the carbon source. The pseudo-first- and second-order models were found to best fit the ammonia removal processes under low and high loads, respectively, suggesting distinct ammonia removal pathways. Full-length 16S rRNA gene sequencing and metagenomic results revealed that comammox-dominated under different oxygen levels, in conjunction with anammox and heterotrophic denitrifiers. The abundance of enzymes involved in energy metabolism indicates the coexistence of anammox and autotrophic nitrification-heterotrophic denitrification pathways. The binning results showed that comammox bacteria engaged in horizontal gene transfer with nitrifiers, anammox bacteria, and denitrifiers to adapt to an obligate environments. Therefore, this study demonstrated that comammox, anammox, and heterotrophic denitrifiers play important roles in the OLAND process and provide a reference for further reducing aeration energy in the autotrophic nitrogen removal process.

Can natural zeolite improve the removal of micropollutants in a nitrifying sequencing batch reactor? Insights on bioreactor performance, kinetics, and microbial community using Ibuprofen and Diclofenac as model micropollutants

This study presents the effect of natural zeolite (NZ) on a nitrifying sequencing batch reactor for removing ibuprofen (IBP) and diclofenac (DFC) in the long term, including kinetics and microbial community. The research was conducted in two 2 L liquid-volume bioreactors, one with 5 g/L of NZ. Nitrogen load rates ranging between 5.8 and 8.5 mg N/L h were studied. Bioreactors were operated for 217 days, with IBP and DFC concentrations ranging between 20 and 2000 μg/L. The results showed that using NZ in a nitrifying SBR only improves IBP removal at low concentrations (40 μg/L). IBP and DFC do not affect the nitrification efficiency or kinetic of ammonia removal. In the presence of IBP and DFC, NZ also favored a higher relative abundance in the genus Nitrosomonas and the Bradyrhizobiaceae family (responsible for nitrite-oxidizing activity), allowing higher IBP degradations at low IBP concentrations. Finally, IBP and DFC stimulated heterotrophic nitrification.

Integrating electrochemical pretreatment with microalgae treatment for nitrogen and phosphorus removal and resource recovery from swine wastewater

This study integrates electrochemical pretreatment with microalgae (Scenedesmus obliquus) treatment to enhance nitrogen and phosphorus removal and resource recovery from swine wastewater. By optimizing electrochemical and microalgae treatment conditions, the dilution factor and the hydraulic retention time for microalgae treatment were reduced to 5 times and 7 days, respectively. Under the optimized operational conditions, removal efficiencies of total nitrogen and ammonia could reach over 89 %and 96 %,respectively, and the removal efficiency of total phosphorus was over 99 %. The study also found that aluminum was more suitable than iron for anode as it produced fewer residues. Additionally, the electrochemical pretreatment reduced Cu2+ and Zn2+ concentrations, mitigating negative impacts on microalgal growth. The microalgae biomass harvested from developed processes was rich in saturated fatty acids, which was desirable for biodiesel production. This approach addresses the challenges of nutrient removal for swine wastewater treatment with high quality biomass recovery.

Fulvic acid mediated highly efficient heterotrophic nitrification-aerobic denitrification by Paracoccus denitrificans XW11 with reduced C/N ratio

Reducing the C/N ratio requirements for heterotrophic nitrification-aerobic denitrification (HNAD) is crucial for its practical application; however, it remains underexplored. In this study, a highly efficient HNAD bacterium, Paracoccus denitrificans XW11, was isolated. The HNAD characteristics of XW11 were studied, and the redox mediator fulvic acid (FA) was used to reduce the C/N requirements. Whole-genome sequencing revealed multiple denitrification genes in XW11; however, nitrification genes were not identified, because heterotrophic nitrification-related gene sequences were not included in the database. However, the nitrogen removal related enzyme activity test revealed complete nitrification and denitrification pathways. Reverse transcription PCR showed that the membrane-bound nitrate reductase (NarG), rather than the periplasmic nitrate reductase, was responsible for aerobic denitrification. The conventional nitrite reductase (NirS) also does not mediate nitrite denitrification. When the C/N ratio was 10, the ammonia removal efficiency of the Control was 71.71 % and the addition of FA increased it to 86.12 %. Transcriptomic analysis indicated electron flow from the carbon source to FA without proton transmembrane transport, and the presence of FA constructs another electron transfer system. The redox potential of oxidized FA/reduced FA is 0.3679 V, avoiding competition for electrons from Complex III. Thus, ammonia monooxygenase obtains electrons more easily, thereby promoting nitrification. The enzyme activity test of the nitrification process confirmed this view. In addition, NarG expression increased, and the denitrification process was enhanced. Overall, FA improved HNAD efficiency by facilitating electron transfer to the nitrogen dissimilation process, offering a novel approach to reduce the C/N requirement of HNAD.

A detailed chemical kinetic model for methanol and ammonia co-oxidation under hydrothermal flames: Reaction mechanism and flame characteristics

A detailed chemical kinetic model for ammonia and methanol co-oxidation under hydrothermal flames was established with pressure and thermodynamic corrections. Simulation model was validated by comparing with experimental temperature rise, and methanol and ammonia removal efficiencies. Species evolutions, reaction paths, and reaction sensitivities for pure ammonia combustion, and ammonia and methanol co-oxidation under hydrothermal flames were analyzed. Ammonia concentration begins to decrease only when methanol is consumed in a certain amount in the ammonia and methanol co-oxidation under hydrothermal flames, indicating the addition of methanol promotes the degradation of ammonia. Moreover, reaction heat is more conductive to ignition and the conversion of ammonia to nitrogen than active free radicals provided from methanol. The ignition delay time presents a minimum as a function of ammonia/methanol concentration ratio, with the minimum values of ignition delay time present at approximately ωNH3/ωCH3OH = 1 for different methanol concentrations. Higher preheating temperatures favor more NOX but less N2O formation, while higher ammonia concentrations favor both NOX and N2O formations. The presence of ammonia increases the laminar flame speed and permits a lower extinction temperature, indicating the mixture of methanol and ammonia can improve the stability of hydrothermal flames.