Effect Of Moisture Research Articles

The response of ostracod faunal assemblages to hydrology, lake level, and carbon cycling in a Jamaican marl lake: a palaeolimnological investigation

Abstract. Ostracod taxa from shallow freshwater lakes are sensitive to a range of limnological factors including temperature, hydrological habitat, lake level, and the distribution of aquatic plants. Ostracod assemblages preserved in Quaternary lake sediments can be used to reconstruct limnological change and are therefore potentially valuable palaeoenvironmental proxies. However, lack of autecological information about some taxa may limit the validity of such reconstructions. We use fossil ostracod assemblages recovered from radiocarbon-dated late Holocene sediments from Wallywash Great Pond, a small, shallow freshwater lake in southwestern Jamaica, to reconstruct limnological change over the past ∼ 1800 years. We circumvent ongoing taxonomic and ecological uncertainties associated with the identification of fossil ostracod taxa by drawing on observations of the ecology of ostracods found living in Jamaican water bodies. By combining this information with limnological data from the extant lake, and with sedimentological and isotopic data from the lake sediments, we show that a published interpretation of ostracod assemblages for the late Quaternary of Wallywash Great Pond is simplistic, at least for the late Holocene section of the sediment record. We conclude that changes in ostracod assemblages are linked to variations in the input of undersaturated groundwater to the northern part of the lake from which the core was recovered. These variations, which were driven by changes in the precipitation / evaporation ratio (effective moisture), also controlled sedimentation, with reduced effective moisture and a decline in undersaturated groundwater input favouring marl precipitation, whereas organic sediments are linked to increased effective moisture and enhanced groundwater input. Our findings suggest that the dramatic shifts in ostracod assemblages at this site are a complex response to changes in hydrology, sedimentology, and carbonate saturation rather than being a simple indicator of lake-level change. Combining ostracod assemblage data with the results of other palaeolimnological analyses also allows more detailed reconstructions to be made for this lake, and such a multiproxy approach is recommended for similar lakes elsewhere.

Numerical Investigation on Flowability of Pulverized Biomass Using the Swelling Bed Model

Numerical investigations on the flowability of pulverized biomass are crucial for agriculture, aiding in optimizing biomass use, crop residue management, soil health improvement, and environmental impact mitigation. Rising interest in biomass and conversion processes necessitates deeper property understanding and technological process optimization. Moisture content is a key parameter influencing biomass quality. In this paper, computer simulations of shear tests depending on the moisture content using the discrete element method were carried out and compared with experimental results. An experimental study and modeling for Jenike’s direct shearing apparatus was carried out. A swelling bed model was proposed to account for the effect of moisture. The swelling bed model assumed an increase in biomass grain vorticity proportional to the moisture content. The model was solved using the discrete element method (DEM). The model considers the effect of moisture on the values of Young’s and Kirchoff’s moduli for biomass grains. The model assumed that moisture is not present in surface form, the total amount of moisture is absorbed into the interior of the material grains, and the volume of a single grain increases linearly with an increase in the volume of the absorbed moisture. The tested materials were pulverized sunflower husks, apple pomace, distiller’s dried grains with solubles (DDGS), meat and bone meal (MBM), and sawdust. Samples with moisture contents of 0%, 10%, 20%, and 30% were tested. The best agreement of the model with the experimental data was observed for the most absorbent materials in which moisture was not present in surface form, such as apple pomace, DDGS, and sawdust. Research data are important for the proper design of biomass storage, transportation equipment, and utilization as feedstock for bioenergy production or soil enrichment.

Effects of water additive and moisture on the performance of Dion-Jacobson perovskite [C6H4(CH2NH3)2](CH2NH3)3Pb4I13 solar cells

This work applies comprehensively researches on the influence of water as an additive in precursor solution, and the moisture (65 % relative humidity) on the performance of Dion-Jacobson (DJ) perovskite [C6H4(CH2NH3)2] (CH2NH3)3Pb4I13 solar cells. The results indicate that 3 %−15 % (v/v) water as an additive has minor effect on the power conversion efficiency (PCE) of fresh prepared solar cells, but it can improve the resistance of device to humidity. More importantly, with an appropriate ratio of water additive and moister action time, the perovskite film shows a smoother surface, higher coverage, and better crystallinity, resulting in an optimal PCE of ∼ 8 %, compared to ∼ 1 % of fresh prepared one. Our results are helpful to understand the effect of water and moisture on DJ perovskite solar cells, may contributing to develop rational strategies to improve devices’ stability under humidity ambient.

Characterization of Asphalt Filler Mastics with Industrial By-Products as Fillers under the Coupled Effect of Aging and Moisture

An asphalt mix comprises asphalt binder and aggregates of different sizes (coarse and fine) and filler. Even with a smaller share, filler plays a crucial role in the performance of asphalt-filler mastics. The study is motivated by the growing need to preserve natural resources and aims to investigate the utilization of four different industrial by-products/wastes (electric arc furnace slag filler, basic oxygen furnace slag filler, tire pyrolysis char filler, and plastic pyrolysis char filler, and one conventional natural stone aggregate filler (NSAF) in asphalt-filler mastics. Four conditioning environments were used to characterize the chemo-rheological properties of the mastics formulated by these five different fillers: unaged, long-term aged, freeze-thaw, and freeze-thaw of long-term aged mastics. To understand the significance of filler attributes in the filler-asphalt mastic performance, a correlation between various filler characteristics (specific surface area, Rigden voids, methylene blue value, and hydrophilic coefficient) and the mastic properties (multiple stress creep and recovery, linear amplitude sweep, binder yield energy test, and Fourier transform infrared spectroscopy) was also attempted. The fatigue life and elastic recovery of the mastics were negatively affected by the combined effects of aging and moisture. The filler characteristics showed a negligible-to-low association with fatigue parameters and a good correlation with rutting performance. The use of these industry co-products/by-products as fillers is supported by the superior rutting and fatigue performance of steel slag and pyrolytic char fillers compared with the traditional NSAF.

Drying kinetic, thermodynamic and quality analyses of infrared drying of truffle slices.

Kinetic and thermodynamic parameters are the most important part for making a suitable tool for drying agricultural products. Moreover, calculation of the energy required for the drying of product, the properties of the rehydration ratio, the food appearance changes, and the evaluation of the microstructure of food are crucial. Since the thermodynamic properties of truffle slices have not yet been reported, this study aims to establish a mathematical model to describe drying process of agriculture product, evaluate the effective moisture diffusion coefficient (Deff), determining the activation energy (Ea) to elucidate the thermodynamic characteristics, measure color characteristics, and rehydration ratio (RR) during the drying process of truffle slices. Truffle slices were dried in an infrared (IR) dryer at four temperatures of 50-80°C and two thicknesses of 0.5 and 1cm. The best model to describe the drying process of truffle slices was Midilli etal.'s model. The value of Deff, SEC, and RR were in the range of 3.06 × 10-8 to 2.48 × 10-7 m2/s, 79.68-191.271kWh/kg, and 5.99-7.49, respectively. The Deff of truffle slices increased with the above-mentioned parameters of the samples. The Ea obtained was 26.62-27.43kJ/mol. The results indicated that enthalpy and entropy decreased with increasing drying temperature, while Gibbs free energy improved. The enthalpy, entropy, and Gibbs free energy values changed between 24.48-25.28kJ/mol, -130.47 to -122.63 J/mol °K, and 63.97-70.17kJ/mol, respectively. In addition, the results of color attributes decreased with increasing temperature, while chroma oppositely increased.

Effects of Vermicomposting on Compost Quality and Heavy Metals：A Meta-analysis

In order to comprehensively evaluate the effects of vermicomposting on compost quality and the conversion of heavy metals under different control conditions, 109 studies were reviewed. The effects of earthworm species, pre-compost time, ventilation methods, initial C/N, initial pH, and initial moisture of the raw materials on compost quality and the heavy metal toxicity were quantitatively discussed during the vermicomposting process through Meta-analysis. The results showed that the six subgroups of factors all showed obvious influences on the compost quality and heavy metal toxicity. After vermicomposting, the contents of NO3--N (116.2%), TN (29.1%), TP (31.2%), and TK (15.0%) were significantly increased, whereas NH4+-N (-14.8%) and C/N (-36.3%) were significantly decreased. Meanwhile, the total amount of Cu and Cr of the final compost and their bioavailability were significantly reduced. Considering the influences of grouping factors on compost quality and heavy metals, it is recommended to adjust the initial moisture of pile materials to 70%-80%, C/N to 30-85, and pH to 6-7 and to conduct pre-composting for 0-15 d; additionally, vermicomposting should be naturally placed when the composting is aimed at promoting the compost quality. If the main purpose is to weaken the perniciousness of heavy metals in the raw material, it is recommended to adjust the initial moisture of the material to 50%-60%, C/N to less than 30, and pH to 7-8; to conduct no pre-compost; regularly turn the piles; and use the earthworm Eudrilus eugeniae for vermicomposting.

Hygrothermal buckling analysis of thin rectangular FGM plate with variable thickness

PurposeThis paper aims to contribute novel insights into the analysis of thin functionally graded material (FGM) plates with variable thickness, considering both temperature-dependent and independent material properties, focusing on critical linear buckling temperature rise and the effect of critical linear moisture for various moisture concentrations.Design/methodology/approachThe study derives stability and equilibrium equations for thin rectangular FGM plates under hygrothermal loading, employing classical plate theory (CPT). Buckling behavior is examined using Galerkin’s method to obtain pre-buckling force resultants.FindingsThe findings highlight significant increases in critical buckling temperature with aspect ratio, distinct temperature sensitivity between materials and increasing moisture susceptibility with larger aspect ratios. These insights inform material selection and design optimization for FGM plates under hygrothermal loading, enhancing engineering applications.Research limitations/implicationsThis research primarily focuses on hypothetical scenarios and mathematical model development and analysis.Originality/valueThis paper presents original contributions in the field by addressing the hygrothermal buckling analysis of thin FGM rectangular plates with variable thickness, utilizing CPT, thereby enriching the understanding of structural behavior in varying environmental conditions.

Microbial transformation mechanisms of particulate organic carbon to mineral-associated organic carbon at the chemical molecular level: Highlighting the effects of ambient temperature and soil moisture

Soil dissolved organic matter (DOM), an important component of active soil organic carbon (C), plays a crucial role in controlling C transformation. However, the role of DOM in mediating the conversion of particulate organic C (POC) into mineral-associated organic C (MAOC) at the molecular level remains unclear. In this study, the microbial conversion of POC to MAOC at the molecular level was investigated at different ambient temperatures and soil moisture levels. An increase in ambient temperature led to the conversion of POC to labile C, whereas MAOC increased with soil moisture. CHO, CHNO, and CHOS increased with soil moisture and temperature. The highest temperature (35 °C) promoted conversion of lignin/cram (carboxyl-rich alicyclic molecules)-like molecules into aromatic components with the highest intragroup transformation of DOM (74%). The highest soil moisture (60%) favoured the conversion of refractory substances into aliphatic/peptide and lipid components with the highest intergroup transformation (28%). Compared to fungi, bacteria were the main driving force for DOM transformation. Therefore, changes in ambient temperature and soil moisture control the microbial formation and transformation of different C fractions (i.e. POC and MAOC) via DOM differently at the molecular level.

Microbial population and yield of rice–wheat system under variable irrigation and nutrient management

A field experiment was conducted during rainy (kharif) season of 2018–19 and winter (rabi) season of 2019–20 at the Water Management Research Farm of CSK Himachal Pradesh Agricultural University, Palampur, Kangra, Himachal Pradesh to study the effect of moisture and nutrient management practices on different soil microbial entities and crop yields in rice (Oryza sativa L.)–wheat (Triticum aestivum L.) system. Experiment was laid out in a split-plot design with 3 replications. Treatments comprised of 3 irrigation levels, viz. Recommended critical stages regimes; Irrigation at 0.8 CPE (cumulative pan evaporation) (rice) and 0.6 CPE (wheat); Irrigation at 1.0 CPE (rice) and 1.0 CPE (wheat) assigned to main-plots and 4 nutrient management practices, viz. Inorganic; Organic; Natural farming; and Integrated management allotted to sub-plots. Irrigation at critical stages resulted in significantly higher rice yield, bacterial, azotobacter, phosphate solubilizing bacteria (PSB), actinomycetes population. However, fungi population increased under higher moisture regimes. In case of wheat crop, irrigation at 1.0 CPE resulted in a significantly higher yield (7.5% higher over irrigation at critical stages) in both the years of study. Organic and integrated nutrient management practices being statistically at par with each other recorded significantly higher microbial population. A significantly higher fungi population was, however, recorded with natural farming. The highest crop yields were obtained with integrated nutrient management (3.4 t/ha rice and 3.6 t/ha wheat in second year). The best combination for rice was irrigation at critical stages along with integrated nutrient management. Whereas, for wheat irrigation at 1.0 CPE with same nutrient management proved to be the best. Hence it is recommended to follow integrated nutrient management and irrigation at critical stages in rice and at 1.0 CPE in wheat for higher productivity as well as for improved biological properties of soil.

Response of Moisture and Temperature Diffusivity on an Orthotropic Hygro-thermo-piezo-elastic Medium

This research explores the complex interaction between piezoelectric waves and heat-moisture diffusion within a semi-infinite piezoelectric material under hygro-thermal conditions. By employing a two-dimensional Cartesian framework, novel governing equations for a thermo-piezoelectrically orthotropic medium influenced by moisture effects are developed. Accurate representations for key parameters are obtained by utilizing normal mode analysis. The investigation examines the influence of critical factors like moisture content, diffusivity, and temperature diffusivity on the spatial distribution of various physical fields. Additionally, a particular scenario of significance is highlighted. These results have the potential to improve sensor, actuator, and energy-harvesting device performance and dependability.

The feasibility of using effective packaging to protect wooden furniture from moisture effects "An applied study on samples of wood"

The feasibility of using effective packaging to protect wooden furniture from moisture effects "An applied study on samples of wood"

Influence of root canal moisture on the penetration of TotalFill bioceramic sealer into the dentinal tubules: A confocal laser scanning microscopy study

Abstract Introduction: Bioceramic (BC) sealers exhibit multiple desirable biologic and physical properties. The aim of this study was to evaluate the effect of root canal moisture on the depth of TotalFill BC sealer penetration into dentinal tubules at different levels using a confocal laser scanning microscope (CLSM). Materials and Methods: The manuscript of this laboratory study has been written according to preferred reporting items for laboratory studies in endodontology 2021 guidelines. Forty single-rooted extracted human premolars were decoronated using a low-speed diamond disc, followed by root canal preparation using nickel–titanium files under copious irrigation. The samples were randomly allocated for obturation into four groups n = 10 based on the sealer and root canal moisture status. Group A: TotalFill BC sealer in wet canal, Group B: TotalFill BC sealer in dry canal, Group C: AH Plus sealer in wet canal, and Group D: AH Plus sealer in dry canal. The roots were sectioned at three different distances from the apex. The root segments were examined using CLSM to measure the extent of sealer penetration into the dentinal tubules. The data underwent analysis through a three-way mixed ANOVA test, followed by post hoc assessments (P < 0.05). Results: In wet canals, the tubular penetration of TotalFill BC sealer was notably greater than that of AH plus, with a statistically significant difference. However, AH Plus sealer had a statistically significant tubular penetration in the dry canals compared to the wet. Greater sealer penetration was observed at 5 mm from the apex, followed by 3 mm, and the least penetration depth was found at 1 mm from the apex. Conclusions: The presence of root canal moisture and distance from the apex had a significant impact on the penetration of TotalFill BC sealer into the dentinal tubules.

Structural, soil-water, and dynamic characteristics of clay with different moisture and temperature histories

Variations in the hydro-mechanical properties of pavement subgrade soils are complex under long-term, repeated, and interlaced moisture and temperature (M-T) effects, such as wetting-drying (WD) and freeze-thaw (FT) processes. This study compares the soil structure, soil-water characteristic curves, and accumulated plastic strain (ɛ p) of compacted Heilongjiang clay with three different M-T histories. Experimental results demonstrated that (i) after M-T actions, structural pores develop while textural pores shrink, leading to a reduction in the water retention capacity and an increase in the desaturation rate. Following the stabilization of the M-T effects, the soil structure and soil-water characteristics of specimens with different M-T histories become similar; (ii) at high moisture content (w), ɛ p is more sensitive to moisture changes (including w and suction, s). Following the FT cycles, ε p and ε pa (the difference between the ε p at 5000th and 3000th cyclic loading) become more sensitive to moisture changes; (iii) after M-T effects, the ε pa-w relationship is nonlinear while the ε pa-logs relationship is linear. Different M-T histories generated differences in only the ε p at the beginning of the FT processes while such differences disappear after M-T effects have stabilized. The experimental data presented in this paper could prove valuable in understanding the behaviors of pavement soils under complex environmental conditions.

A comparative assessment of drying kinetics, energy consumption, mathematical modeling, and multivariate analysis of Indian borage (Plectranthus amboinicus) leaves

AbstractIn the current study, four drying methods, namely microwave (MD), vacuum (VD), hot air (HAD), and freeze drying (FD), were compared for drying of Indian borage (Plectranthus amboinicus) leaves for optimum energy consumption and bioactive compounds' retention. Effective moisture diffusivity for MD was about 100 times more than that of HAD and VD. MD at 600 W showed minimum specific energy consumption (4.04 kWh/kg), proving the most suitable drying condition. Moreover, it showed desirable energy values in terms of maximum specific moisture extraction rate (0.265 kg moisture/kWh) and maximum drying efficiency (15.85%). Bioactive compounds' retention in terms of phenols, antioxidants, and flavonoids was better in MD, followed by FD. Mathematical modeling of drying kinetics data revealed proper fitting of three drying models, namely, Aghbashlo, Modified Page‐II, and Page model, for explaining the drying behavior of Indian borage leaves. Multivariate characterization using principal component analysis revealed that FD and MD had a strong effect on bioactive compounds' retention, while VD and HAD showed least effect. Hence, based on optimum energy utilization and bioactive compounds' retention, MD at 600 W was selected for efficient drying of Indian borage leaves.Practical applicationsDrying of Indian borage leaves using microwave drying (MD) resulted in quicker drying with retention of bioactive compounds and color of dried leaves. The energy aspects were also favorable for industrial scale‐up. With due consideration to capacity enhancement in MD, it can prove to be a promising source of drying for culinary, medicinal, and aromatic plants.

Enhancing the Humidity Resistance of Triboelectric Nanogenerators: A Review.

Triboelectric nanogenerators (TENGs) are sustainable energy resources for powering electronic devices from miniature to large-scale applications. However, their output performance and stability can deteriorate significantly when TENGs are exposed to moisture or humidity caused by the ambient environment or human physiological activities. This review provides an overview of the recent research advancements in enhancing the humidity resistance of TENGs. Various approaches have been reviewed including encapsulation techniques, surface modification of triboelectric materials to augment hydrophobicity or superhydrophobicity, the creation of fibrous architectures for effective moisture dissipation, leveraging water assistance for TENG performance enhancement, and other strategies like charge excitation. These research efforts contribute to the improvement of environmental adaptability and lead to expanded practical TENG applications both as energy harvesters and self-powered sensors. The efficacy of these strategies and future challenges are also discussed to facilitate the continued development of resilient TENGs in high humidity environments.

Comparison of microwave assisted foam drying processes to improve the physicochemical properties and to reduce GHG values of the melon powder processes

AbstractIn this study, in the process of valorizing melon biomass into food powder at 360, 540, 720 and.900 W power values; Drying rate, moisture rate, effective moisture diffusion, SMER-SEC energy consumption and greenhouse gas emission (GHG) values of production processes were investigated. It was determined that the average drying rates of the samples varied between 0.2393–0.9376 g moisture/g dry matter.minute. According to microwave power values, the effective moisture diffusion values of the products were found to vary between 5.47 × 10–7-2.27 × 10–6 m2/s. It was determined that the average SMER values of the drying processes varied between 0.024–0.047 kg/kWh and SEC values varied between 21.12–40.93 kWh/kg. According to the drying processes, NOX, SO2 and CO2 values were calculated to vary between 0.210–1.106, 0.00–2.919 and 49.50–200.168 g, respectively. It was found that the most suitable microwave power in terms of drying kinetics, energy consumption and greenhouse gas values was 900 W.

Study of Palm Oil Shell Utilization as Metallurgical Coke with Variation of Bondcrete Additive

Coke, an essential ingredient in the steel and metallurgical industries, is typically derived from bituminous coal. However, in Indonesia, where bituminous coal is rare, coke production is dependent on coal imports due to the high moisture content of local coal. An alternative approach is to use biomass, such as palm oil processing waste, for "biomass coke" to produce a more environmentally friendly coke with lower greenhouse gas emissions. Palm kernel shell waste rich in lignocellulose proved suitable for this purpose due to its compressive strength and carbon content. Pyrolysis, a technique for creating porous micro-structured carbon from palm kernel shells, was used to produce this coke substitute, offering a more sustainable energy source with a lower carbon footprint than fossil fuels. Bio-coke exhibits low moisture content (5.84%) and ash content (13.20%) due to the moisture and ash reduction effects of bondcrete adhesive during combustion. It also demonstrates substantial compressive strength (14 mPa), a high calorific value (6795 cal/g), and a favorable pore structure with a large surface area, indicating a positive influence of bondcrete adhesive on coke properties without compromising energy potential.

Water Proofing System in Concrete Structures

Water proof structure is a design concept that aims to repel water and prevent any moisture from seeping into the materials used in construction. This type of structure is particularly important in areas prone to heavy rainfall or flooding, as it helps maintain the integrity and durability of the building. Water proof concrete is formulated with additives and admixtures that create a barrier against water infiltration, making it ideal for areas prone to high levels of humidity or moisture. By incorporating this technology into construction projects, builders can ensure that their structures remain protected from the damaging effects of moisture, such as mold growth, deterioration of building materials, and potential structural issues. The use of abstract damp proof concrete represents a forward-thinking approach to building design and can greatly enhance the durability and longevity of a building.Crystalline admix water proofing with water stops, water proofing with Atactic Polypropylene membrane, and injection are the water proofing systems most commonly used in basements. Using non-shrinking cementitious grout for waterproofing, concrete must have crystalline admixtures made of cementitious powder and water. For toilets in non-sunken places, water proofing with an elastomeric cementitious coating is used. In sunken areas, brick jelly cement concrete with inherent water proofing compound is used.In this paper it deals with the different types of water proofing system..

Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and mechanical properties of flax fiber composites

AbstractNatural fibers are a sustainable alternative to synthetic fibers due to their high weight‐specific Young's moduli and strengths. However, the mechanical properties of natural fibers are very sensitive to their moisture content. Therefore, chemical treatments are often applied to natural fibers to lower their water absorption and enhance fiber‐matrix interaction. The aim is to study the effects of fiber modifications with sodium hydroxide, silane, and siloxane on the water uptake and tensile properties of flax fiber composites produced via prepreg technology. In addition, the effect of moisture on the composites' tensile properties was investigated by conditioning one part of the tensile specimens according to DIN EN 2823 (at 70°C and 85% relative humidity). The NaOH treatment was the only modification that had positive effects on the Young's modulus and tensile strength in the unconditioned and conditioned state. The increase of the tensile modulus and strength are most likely due to changes in flax fiber composition, crystallinity of the cellulose and the rougher fiber surface of NaOH modified fibers. This shows that chemical treatment of natural fibers may improve the performance level of natural fiber composites and prevent a loss in their mechanical properties in humid environments.Highlights Flax fiber modifications with sodium hydroxide, silane, and siloxane. Flax fiber composite production via prepreg technology. Water uptake after conditioning at 70°C and 85% relative humidity. Tensile tests before and after conditioning. SEM images of modified flax fibers.

Buyer aware: Three new failure modes in TOPCon modules absent from PERC technology

The n-type tunnel oxide passivated contact (TOPCon) technology is going to be the leading industrial technology in 2024. However, there are still concerns about the reliability of TOPCon when used in the field, especially in glass/backsheet modules. This work investigates the impact of damp heat (DH) on the performance TOPCon and PERC glass/backsheet modules by varying bills of materials (BOM), such as polyolefin elastomer (POE), ethyl-vinyl acetate (EVA), and polymer backsheet options. It is found that PERC modules remain stable, with a maximum power loss (Pmax) of only 1–2%rel after 1000 h of DH testing, regardless of the BOM used. However, TOPCon modules experienced significant degradation with a drop in Pmax ranging from 4 to 65%rel after the same testing duration. Despite utilizing POE, an expensive encapsulant with a significantly lower water vapour transmission rate than EVA and devoid of acetic acid formation, a severe performance decline was observed in a specific POE variant within TOPCon modules, with a loss of power of up to 65%rel. Three types of failures were observed in TOPCon modules: point-localized failure, failure at/around the interconnection of ribbon wires and busbars, and failure throughout the whole area of cells/modules. These failures likely result from electrochemical reactions involving moisture, cell metallization, ribbon wires, contaminants, soldering flux, and additives released from POE. The observed findings underline two crucial points: 1) the vulnerability and potential failure of TOPCon solar cells when exposed to high humidity and contaminants, and 2) the high risk associated with certain POE types, which could potentially adversely affect TOPCon cells. Hence, it is crucial to exercise utmost caution and precision in handling and selecting encapsulation materials for TOPCon modules. Accordingly, urgent and extensive research efforts are crucial to substantially increase our comprehension and fortify the reliability of TOPCon cells against the pernicious effects of moisture and other contaminants.