Effective Dispersion Research Articles

Towards mass production of graphene-reinforced inconel 718 by powder injection moulding

Powder Injection Moulding (PIM) offers a promising avenue for economically producing intricate, graphene-reinforced superalloy parts with complex geometries, overcoming current limitations in their industrialization for engineering applications. The organic binder used in PIM has the potential to be the graphene dispersion media in the superalloy powder saving the need for other processes. However, this addition method needs to be comprehensively evaluated due to the inherent challenges within the PIM process. This study pioneers the utilization of PIM to fabricate Inconel 718 superalloy, incorporating varying levels of reduced graphene oxide (rGO). The effective dispersion of rGO during mixing and its prevalence after debinding and sintering stages have been demonstrated by combining several characterization methods. Graphenic species are identified in all the process stages, though in the sintered microstructure these are commonly accompanied by niobium carbides, which indicates that rGO is partly degraded during the PIM process by reacting with the matrix elements. The encouraging results of this work establish the grounds to produce graphene-reinforced superalloys by PIM and call for further investigation, which can be extended to other metal alloys and ceramics.

Preparation of nanohydroxyapatite with diverse morphologies and optimization of its effective aqueous colloidal dispersions for biomedical applications

Hydroxyapatite (HAp) is a bioactive and important material for medical applications. Therefore, search for new possibilities in combining hydroxyapatite with other compounds opens a promising path for creating innovative biomaterials. For this purpose, the preparation of effective aqueous colloidal dispersions based on nanohydroxyapatite (nHAp) of varying degrees of crystallinity and morphology was investigated. Nanohydroxyapatite was prepared by co-precipitation with post-processed freeze-drying, hot-air drying, sintering, and hydrothermal synthesis with tri-sodium citrate. The prepared nanosized powders were analyzed by using X-ray powder diffraction, scanning, and transmission electron microscopy techniques. The influence of post-processing techniques, such as lyophilization, freezing, hot-air drying, and sintering, on the crystallinity and morphology of prepared nanohydroxyapatite suspensions was investigated. Aqueous nanohydroxyapatite colloidal dispersions were prepared using deionized water and tri-sodium citrate solution (0.01 % wt.) with an ultrasonic homogenizer. The study demonstrated that the most effective aqueous colloidal dispersion of nHAp (stable for at least 14 days) can only be obtained using a tri-sodium citrate solution together with freeze-drying. When the material shows higher crystallinity and a more clearly rod-like shape, even tri-sodium citrate does not help maintain the stability of the colloids for a long time. These findings are significant for future investigation involving the preparation of new materials based on nHAp, such as hydrogels, membranes, scaffolds, cement, and composites for biomedical applications. They can be applied in theranostics and drug delivery systems.

Inkjet Printing of High-Color-Purity Blue Organic Light-Emitting Diodes with Host-Free Inks.

Inkjet printing technology offers a unique approach to producing direct-patterned pixels without fine metal masks for active matrix displays. Organic light-emitting diodes (OLEDs) consisting of thermally activated delayed fluorescence (TADF) emitters facilitate efficient light emission without heavy metals, such as platinum and iridium. Multi-resonance TADF molecules, characterized by their small full width at half maxima (FWHM), are highly suitable for the requirements of wide color-gamut displays. Herein, host-free TADF inks with a low concentration of 1 mg/mL were developed and inkjet-printed onto a seeding layer, concurrently serving as the hole-transporting layer. Attributed to the proof-of-concept of host-free inks printed on a mixed seeding layer, a maximum external quantum efficiency of 13.1% (improved by a factor of 21.8) was achieved in the inkjet-printed OLED, with a remarkably narrow FWHM of only 32 nm. Highly efficient energy transfer was facilitated by the effective dispersion of the sensitizer around the terminal emitters.

Broadband dispersion compensation and high birefringence photonic crystal fiber for CWDM/DWDM networks

In this study, we propose a new design based on photonic crystal fibers (PCFs) for broadband dispersion compensation in telecommunication networks. The proposed design has a hexagonal structure arrangement of air-holes rings of different diameters between the silica core and the cladding. The PCF properties like effective area, nonlinearity, dispersion slope, confinement loss, and birefringence are reported and discussed. For the best performance we present three designs A, B and C. Simulation results show that the three designs cover the six-telecommunication optical bands O-, E-, S-, C-, L- and U- bands (wavelengths ranging from 1260 to 1675 nm). Design A achieves a large negative dispersion value of about − 1716 ps/(nm.km) with relative dispersion slope equals to that of conventional single-mode optical fibers (SMFs) of about 0.0036 nm−1, which makes it very suitable for long-haul DWDM transmission systems. With a little modification in the core, designs B and C achieve much higher confinement ability and achieve a very large birefringence value for polarization mode dispersion and sensing applications. Design C is engineered to have exact opposite dispersion of SMF with zero dispersion at the wavelength 1310 nm, which makes it a promising design in CWDM transmission system. The numerical values have been investigated using the full vector finite element method.

Innovative dispersion techniques of graphene nanoplatelets (GNPs) through mechanical stirring and ultrasonication: Impact on morphological, mechanical, and thermal properties of epoxy nanocomposites

Graphene nanoplatelets (GNPs) have attracted tremendous interest due to their unique properties and bonding capabilities. This study focuses on the effect of GNP dispersion on the mechanical, thermal, and morphological behavior of GNP/epoxy nanocomposites. This study aims to understand how the dispersion of GNPs affects the properties of epoxy nanocomposite and to identify the best dispersion approach for improving mechanical performance. A solvent mixing technique that includes mechanical stirring and ultrasonication was used for producing the nanocomposites. Fourier transform infrared spectroscopy was used to investigate the interaction between GNPs and the epoxy matrix. The measurements of density and moisture content were used to confirm that GNPs were successfully incorporated into the nanocomposite. The findings showed that GNPs are successfully dispersed in the epoxy matrix by combining mechanical stirring and ultrasonication in a single step, producing well-dispersed nanocomposites with improved mechanical properties. Particularly, the nanocomposites at a low GNP loading of 0.1 wt%, demonstrate superior mechanical strength, as shown by increased tensile properties, including improved Young's modulus (1.86 GPa), strength (57.31 MPa), and elongation at break (4.98). The nanocomposite with 0.25 wt% GNP loading performs better, according to the viscoelastic analysis and flexural properties (113.18 MPa). Except for the nanocomposite with a 0.5 wt% GNP loading, which has a higher thermal breakdown temperature, the thermal characteristics do not significantly alter. The effective dispersion of GNPs in the epoxy matrix and low agglomeration is confirmed by the morphological characterization. The findings help with filler selection and identifying the best dispersion approach, which improves mechanical performance. The effective integration of GNPs and their interaction with the epoxy matrix provides the doorway for additional investigation and the development of sophisticated nanocomposites. In fields like aerospace, automotive, and electronics where higher mechanical performance and functionality are required, GNPs' improved mechanical properties and successful dispersion present exciting potential.

THE DECLINE OF INFORMATION RESISTANCE AS A PREREQUISITE FOR THE PRACTICE OF POLITICAL MANIPULATION

In this publication, based on the behavioral approach, conceptualization and discursive method, a study is carried out of the possibilities and characteristics of the influence of an objectively developing information array, distributed in accordance with modern communication trends, on the cognitive and emotional processes of the mentality of consumers of an information product in general and on the function of information resistance in particular. As a hypothesis, a statement is formulated according to which, in conditions of objective growth of generated information and the introduction of information (digital, network) addictions into the psyche, in combination with the inertia of perception inherent in the human brain, information resistance decreases, which increases the likelihood of the successful use of manipulative practices as a variation of suggestive communication. A definition of information resistance is given as resistance to the effects of unverified and/or unreliable information. The determinants of the vector of falling information resistance are revealed and studied, such as inertia of perception, pandemic dispersion of digital dependence, information overload. The validity of the correlation between the rate of decrease in information resistance and the effective dispersion of manipulations is substantiated. The leading varieties of modern manipulative practices, which are generated, among other things, by a decrease in information resistance, are characterized - the spread of deepfakes, the synthesis of cybersimulacra (including astroturfing and sockpuppeting), the imposition of behavioral patterns of reference groups, the cultivation and popularization of ersatz culture. Based on the results of the study, a position is formulated according to which a decrease in the level of information resistance, associated with a decline in the intellectual functions of human consciousness, activates primitive archaic forms of consciousness. It is noted that due to the reduction of cognitive methods of adaptation to the surrounding world to the simplest irrational forms, space opens up for the implementation of power relations through emotionally charged manipulations.

Eco-friendly preparation of polyimide/boron nitride composite films with excellent thermal conductivity and mechanical properties

Polyimide/hexagonal boron nitride (PI/BN) composite films have attracted interest as heat dissipation materials for advanced microelectronic devices. However, conventional preparations of PI/BN composite films employ harmful and expensive high-boiling organic solvents. In this work, thermally conductive PI/BN composite films were, for the first time, prepared using a nontoxic, eco-friendly, and inexpensive aqueous solvent. BN was ultrasonically exfoliated in a mixed solvent of water and tert-butanol to obtain aqueous BN suspensions, in which a poly(amic acid) salt (PAAS) was synthesized. The PAAS/BN suspensions were then drop-casted, and thermally imidized into PI/BN composite films. The PI/BN films exhibited excellent in-plane and out-of-plane thermal conductivities (up to 15.043 W/mK and 1.142 W/mK, respectively), which is attributed to the effective exfoliation and dispersion of BN in the aqueous solvent. Furthermore, these films exhibited high tensile strength, flexibility, and thermal stability.

Adsorption mechanism of the novel amphoteric dispersant and its effect on structure and properties of hydration products

The novel amphoteric dispersant (NAD) was prepared by free radical polymerization of acrylic acid (AA), vinyl butylpolyoxyethylene ether (VBPE), N,N-dimethyl-methacryloxyethyl-aminopropyl sulfonate (DMAPS) and acrylate sulfated starch (ASS). It is characterized that the introduction of zwitterionic monomer as side groups and modified starch as branch chains. The chemical structure and its effects on the fluidity, strength, durability and microstructure of cement-based composites containing clay were tested. The results indiacted that zwitterions can improve the chelating adsorption capacity and eliminate the influence of chloride ions, while modified starch branch chain can improve the effect of slow coagulation and water retention. NAD has excellent dispersing and mud resistance effect, which makes the interface of cement hydration products clear, regular shape, uniform distribution and compact structure.The dispersion mechanism was proposed and it is think that NAD was mainly adsorbed on the interface of cement particles by zwitterion chelation adsorption and on the interface of the mud particles by anion groups. Meanwhile, the polyoxyethylene and the starch branch chains synergistic to form spatial barrier layer, showing excellent effects on blocking mud water absorption, improving dispersing and regulating hydration products structure. The research results have positive significance for the developing highly effective anti-mud dispersants.

Ultra-small gold nanoparticles embedded cyclodextrin metal-organic framework composite membrane to achieve antibacterial and humidity-responsive functions

Cyclodextrin metal-organic framework (CD-MOF) is an edible and porous material that can serve as a template for synthesizing small-sized metal nanoparticles. However, its highly hydrophilic nature has limited its wider application. Herein, ultra-small gold nanoparticles (U-AuNPs) were loaded into CD-MOF to produce a composite material Au@CD-MOF. The CD-MOF was utilized as a template to control the size of the AuNPs. The synthesized Au@CD-MOF was easily dispersible in aqueous medium and its released U-AuNPs exhibited effective water dispersion stability within 120 days. Additionally, compared to gold nanoparticles prepared using traditional methods (T-AuNPs), the U-AuNPs exhibited superior antibacterial properties. Furthermore, hydrophilic Au@CD-MOF was incorporated into a hydrophobic polydimethylsiloxane (PDMS) matrix (Au@CD-MOF/PDMS) to achieve a humidity-responsive antibacterial function. The composite membrane exhibited remarkable responsiveness to humidity, showing almost no release of U-AuNPs at 0 % humidity. However, it exhibited approximately 89 % release within 1 h, and complete release of U-AuNPs was observed within 4 h under 100 % humidity. These findings highlight the successful preparation of a humidity-responsive antibacterial composite membrane, which has great potential applications in various scenarios, particularly in the field of antibacterial food packaging.

Effective dispersal patterns in prairie plant species across human-modified landscapes.

Effective dispersal among plant populations is dependent on vector behaviour, landscape features and availability of adequate habitats. To capture landscape feature effects on dispersal, studies must be conducted at scales reflecting single-generation dispersal events (mesoscale). Many studies are conducted at large scales where genetic differentiation is due to dispersal occurring over multiple generations, making it difficult to interpret the effects of specific landscape features on vector behaviour. Genetic structure at the mesoscale may be determined by ecological and evolutionary processes, such as the consequences of vector behaviour on patterns of gene flow. We used chloroplast haplotypes and nuclear genome SNP surveys to identify landscape features influencing seed and pollen dispersal at a mesoscale within the Rogue River Valley in southern Oregon. We evaluated biotic and abiotic vector behaviour by contrasting two annual species with differing dispersal mechanisms; Achyrachaena mollis (Asteraceae) is a self-pollinating and anemochoric species, and Plectritis congesta (Caprifoliaceae) is biotically pollinated with barochoric seeds. Using landscape genetics methods, we identified features of the study region that conduct or restrict dispersal. We found chloroplast haplotypes were indicative of historic patterns of gene flow prior to human modification of landscapes. Seed dispersal of A. mollis was best supported by models of isolation by distance, while seed-driven gene flow of P. congesta was determined by the distribution of preserved natural spaces and quality habitat. Nuclear genetic structure was driven by both pollen and seed dispersal, and both species responded to contemporary landscape changes, such as urban and agricultural conversion, and habitat availability.

Self-assembled peptide nanotubes (SPNTs)/SnO2 nanocomposites for high-performance NO2 sensing at room temperature

Nitrogen dioxide (NO2) is a major pollutant that poses significant risks to sustainable human life. As a result, a growing focus has been placed on the development of highly selective and sensitive gas sensors for NO2. Traditional cutting-edge non-organic NO2 gas detectors often necessitate stringent production conditions and potentially harmful materials, which are not environmentally friendly, and these shortcomings have limited their widespread practical use. To overcome these challenges, we synthesized self-assembled peptide nanotubes (SPNTs) through a molecular self-assembly process. The SPNTs were then combined with SnO2 in varying proportions to construct NO2 gas sensors. The design of this sensor ensured efficient electron transfer and leverage the extensive surface area of the SPNTs for enhanced gas adsorption and the effective dispersion of SnO2 nanoparticles. Notably, the performance of the sensor, including its sensitivity, response time, and recovery rate, along with a lower detection threshold, could be finely tuned by varying the SPNTs content. This approach illustrated the potential of bioinspired methodologies, using peptide self-assemblies, to develop integrated sensors for pollutant detection, providing a significant development in environmentally conscious sensor technology.

Large optoelectronic chromatic dispersion in PN-type silicon photodiodes and photovoltaic cells.

Optoelectronic chromatic dispersion (OED) is a significant source of effective chromatic dispersion in photodiodes. We present an experimental and theoretical study of OED in PN-type Si photodiodes and photovoltaic cells and report on a very large effective chromatic dispersion in these devices. As measured with the modulation phase-shift technique at a frequency of 4 kHz for these slow devices, the OED spectral sensitivity for a commercial Si photodiode is approx. 0.02 deg/nm in the 720-850 nm wavelength band and increases to 0.25 deg/nm at λ = 1µm. For a Si photovoltaic cell, the OED is approx. 0.09 deg/nm in this spectral region. These values translate into an effective chromatic dispersion parameter of approx. 1012ps/(n m ×k m) for these sub-millimeter device lengths, which is over eight orders of magnitude larger than high-dispersion materials such as chalcogenide glass. The enormous dispersion in these sub-millimeter sized silicon-based devices can be utilized for on-chip optoelectronic sensors such as wavelength monitoring and spectroscopy. The substantial OED of photovoltaic cells can be utilized for the characterization and optimization and new applications for optical sensing with these self-powered devices.

Binary mixture of ionic liquid and span 80 for oil spill remediation: Synthesis and performance evaluation

The synthesis of new surfactants helps to mitigate the environmental and financial effects of oil spills by providing efficient cleanup options. Herein, this study provides the development of a binary mixture of Span 80 and Choline myristate [Cho][Mys], a surface-active ionic liquid (SAIL) as green dispersant for oil spill remediation. The synergistic interaction at a 60:40 (w/w) ratio significantly lowered the critical micelle concentration (cmc) to 0.029 mM. Dispersion efficiency tests with Arab crude oil showed optimal performance at a 60:40 ratio of Span 80 and [Cho][Mys] (1:25 dispersant to oil ratio, v/v), achieving 81.16 % dispersion effectiveness in the baffled flask test. The binary mixture demonstrated superior emulsion stability (6 h) and the lowest interfacial tension (1.12 mN/m). Acute toxicity experiments revealed the dispersant's practical non-toxicity with an LC50 value of 600 mg/L. Overall, this environmentally benign surfactant combination shows promise as a safe and effective oil spill dispersant.

Ultrahigh-strengthened intragranular κ-Al2O3 nanoparticles dispersed Mo composite prepared via SPS sintering of core-shell Mo nanocomposite powder

Oxide dispersion strengthening (ODS) is an effective method to improve the mechanical properties of Mo-based materials. However, the mechanical properties of traditional ODS-Mo composites are always limited by the coarsening and intergranular distribution of second-phase particles. In this work, an effective nano-reinforcement dispersion strategy was developed to fabricate an ODS-Mo composite with ultrafine grain and intragranular distribution of second-phase particles. Core-shell structural Mo nanocomposite powders, with internally distributed sub-10 nm Al2O3 dispersoids, were prepared by nano atomization doping (AD) followed by a chemical vapor transport growth strategy. Then, ODS-Mo composites with ultra-fine Mo grain (below 700 nm) and high-density intragranular κ-Al2O3 (below 20 nm) nanoparticles were prepared via spark plasma sintering (SPS), in which a coherent interface between κ-Al2O3 and Mo matrix was formed. The composites present remarkably improved hardness (above 500 HV), bend strength, and compressive yield strength (above 1664 MPa) at room temperature, with a suitable strain to fracture of 27.1 %. The calculation of strengthening mechanisms indicates that the enhancement was mainly attributed to the intragranular κ-Al2O3 nanoparticles. This nano-sized reinforcement distributed within the grain can more effectively pin dislocations and achieve dispersion strengthening in ODS-Mo composites. Therefore, this strategy can efficiently construct intragranular second-phase nanoparticles and open up new avenues to fabricate high-performance ODS-Mo composites.

Bead milling liberates the antioxidant properties of nanosized tubers of Vernonia guineensis Benth (Asteraceae)

Vernonia guineensis Benth. (Asteraceae), locally known as ‘African ginseng’, is an herbaceous plant with various therapeutic properties, sold by herbalists, and used in several traditional African preparations. Nanosizing has the capability to potentiate those preparations in their pharmacological properties. Premilling and extensive grinding using a planetary ball mill were used to reduce the size of V. guineensis tubers towards antioxidant studies. Water was used as an environmental friendly, cost effective solvent and dispersant to generate a nanocolloidal suspension of V. guineensis tubers. Size and size distribution were determined via photon correlation spectroscopy at room temperature which allows discussion on stability by Zeta potential and polydispersity index. Phytochemical screening shows presence of alkaloids, coumarins, polyphenol, saponins, tanins, terpenes, and anthraquinones. The distribution curve in water shows a polydispersed system with large hydrodynamic particles of size close to 1000 nm and a Z-average of 484.5 nm. The preparation separate in two phases with polydispersity index 0.217 for the supernatant and 0.543 for the suspension. In the supernatant and suspension, the particles zeta potential were -12.3 mV and -13.7mV respectively. The Mastersizer analysis indicates that there are smaller particles in volume in the supernatant than in the suspension. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity shows an increase in antioxidant activity, compared to that of ascorbic acid, in the nanoformulated state. These findings allow us to conclude on the potential of size reduction when compared to solvent extraction in pharmacologic preparations.

Investigating the impact of metal ion variations in terephthalate metal–organic frameworks on the organic solvent nanofiltration performance of mixed matrix membranes

Nano-fillers integrated into mixed matrix membranes (MMMs) present promising alternatives for organic solvent nanofiltration (OSN). In this work, our objective is to enhance OSN performance by incorporating terephthalate metal-organic frameworks (M-BDC, where M = Zr or Cu) into a P84 matrix to fabricate M-BDC/P84 composite MMMs. This work focuses on the influence of metal cluster variation on particle size, pore size distribution, and specific surface area of M-BDC, while systematically investigating the impact of M-BDC addition on OSN performance and underlying separation mechanisms. The synthesized membranes underwent comprehensive characterization using SEM, XRD, ATR-FTIR, contact angle, zeta potential, and thermogravimetric analysis. Significantly, all MMMs exhibited superior permeance and methyl blue (MB) rejection compared to P84 membranes. This enhancement is attributed to the improved interfacial contact between M-BDC and P84, as well as their effective dispersion within the membrane matrix. Interestingly, comparative analysis between Cu-BDC/P84 and Zr-BDC/P84 MMMs revealed the latter's superior permeance, attributed to its larger pore size and surface area. The resulting MMMs demonstrated outstanding MB rejection (>96.7%) with ethanol permeance of 21.5 and 19.0 LMH/Bar for Zr-BDC/P84 and Cu-BDC/P84 MMMs, respectively. Furthermore, the stable performance of M-BDC-based MMMs during prolonged MB/ethanol operation underscores their potential significance in the field of OSN, providing valuable insights for future membrane design and application.

Influence of carbon nanotubes on printing quality and mechanical properties of 3D printed cementitious materials

This paper presents the impact of incorporating carbon nanotubes (CNTs) into the 3D printing of cementitious materials, along with the effective dispersion of CNTs. Compared to the control mix, adding CNTs with superplasticizer significantly enhanced the printing quality by reducing the error in height of two-layers from 38% to 30% and an 81% enhancement in the buildability. Moreover, rheology properties revealed shear-thinning behaviour with lower viscosity, resulting in improved flowability. The progressive increase in CNT concentrations up to 0.2% yielded a noteworthy improvement in the mechanical properties. At 28 days, the incorporation of 0.2% CNTs resulted in a significant increase in the flexural strength, compressive strength, and Young's modulus by 99%, 72%, and 43%, respectively, compared to the mix containing silica fume. Microstructural investigation of the CNT-cement matrix revealed nanoscale crack bridges formed by CNTs, reinforcing the cementitious material and improving its mechanical properties.

Effect of Sonication Batch on Electrical Properties of Graphitic-Based PVDF-HFP Strain Sensors for Use in Health Monitoring.

In this study, flexible nanocomposites made from PVDF-HFP reinforced with carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) are manufactured using a sonication and solvent casting method for monitoring purposes. More specifically, the effect of the volume batch under the sonication process is explored. For CNT-based composites, the electrical conductivity decreases as the batch volume increases due to less effective dispersion of the CNTs during the 30-min sonication. The maximum electrical conductivity achieved in this type of sensor is 1.44 ± 0.17 S/m. For the GNP-based nanocomposites, the lower the batch volume is, the more breakage of nanoplatelets is induced by sonication, and the electrical response decreases. This is also validated by AC analysis, where the characteristic frequencies are extracted. Here, the maximum electrical conductivity measured is 8.66 ± 1.76 S/m. The electromechanical results also show dependency on the batch volume. In the CNT-based nanocomposites, the higher gauge factor achieved corresponds to the batch size, where the sonication may be more effective because it leads to a dispersed pathway formed by aggregates connected by tunneling mechanisms. In contrast, in the CNT-based nanocomposites, the GF depends on the lateral size of the GNPs. The biggest GF of all sensors is achieved with the PVDF-HFP/GNP sensors, having a value of 69.36 × 104 at 35% of strain, while the highest GF achieved with a PVDF-HFP/CNT sensor is 79.70 × 103 at 70%. In addition, cycling tests show robust electromechanical response with cycling for two different strain percentages for each type of nanocomposite. The sensor with the highest sensitivity is selected for monitoring two joint movements as proof of the applicability of the sensors manufactured.

Optimizing the structural, thermal, gas sensing and electrical properties of in-situ polymerized poly(thiophene-co-indole)/silicon carbide nanocomposites for energy storage applications

Conducting copolymer nanocomposites of thiophene and indole incorporated with silicon carbide nanoparticles [poly (thiophene-co-indole-SiC) (PPSiC)] has been developed by in-situ copolymerization and these nanocomposites were characterized by different analytical techniques. The FTIR peak at 865 cm−1 signifies the successful incorporation of SiC nanoparticles in the copolymer matrix. The intensity of the UV-Vis absorbance of the copolymer nanocomposites increased with the nanoparticle concentrations, and PPSiC7 showed the highest intensity. This was in correlation with its low optical bandgap energy (3.032 eV) and high refractive index (2.388) value. XRD revealed the consistent positioning of sharp and distinct crystalline peaks of SiC in the copolymer. SEM revealed the effective dispersion of nanoparticles throughout the matrix and uniform dispersion was obtained for PPSiC7 nanocomposite. HR-TEM images validated the presence of spherical-shaped particles in the nanocomposite with the nano-size distribution of SiC. The surface roughness of the copolymer nanocomposite was evident from AFM analysis. TGA and DSC revealed that PPSiC nanocomposites have better thermal properties than the copolymer. AC conductivity increased with frequency and temperature. The PPSiC7 exhibits a maximum conductivity of 1.5×10−2 S/cm at 106 Hz and an activation energy of 0.064 eV. PPSiC nanocomposites demonstrated excellent results in degrading dye and detecting ammonia gas at ambient temperature. All analyses showed that the PPSiC7 nanocomposite exhibited superior properties than the copolymer. These admirable properties can be exploited in developing optoelectronic devices, energy storage devices and gas sensors.

Investigation of different solvents for selective, safe and rapid extraction of curcumin from various food and herbal supplement products: Multivariate strategy and assessment of green profile

In the paper, different extraction solvents including magnetic ionic liquids (MILs), deep eutectic solvents, SUPRAS and surfactant were investigated for the fast, reliable and simple extraction of curcumin in the dispersive liquid–liquid microextraction (DLLME) method prior to UV–Vis spectrophotometric analysis. As a result of preliminary studies, the [Co(C8IM)42+]2[Cl−] MIL was selected as the extraction solvent for the extraction of curcumin from various matrix samples. Optimization of essential factors in the DLLME method was carried out with central composite design (CCD). Effective dispersion of the [Co(C8IM)42+]2[Cl−] MIL in the sample solution was achieved by orbital shaking (OS). After the CCD modelling, the OS-MIL-DLLME method provided linearity in the range of 0.5–225 ng mL−1 with a detection limit of 0.15 ng mL−1 for the model solution. The OS-MIL-DLLME method showed a matrix effect of 7.6 % with an enrichment factor of 135. Validation parameters of the OS-MIL-DLLME method such as selectivity, robustness, intraday/interday precision and recovery test were investigated in detail. The green analytical scale of the method was determined using the analytical greenness calculator tool. The OS-MIL-DLLME method was applied to the foods and herbal supplement products together with the reference method, and quantitative recoveries and statistically reliable results were obtained.