Effect Of Different Substrates Research Articles

Surface-mediated construction of diverse coordination-dominated nanostructures with 4-azidobenzoic acid molecule

The coordination reactions of 4-Azidobenzoic Acid (ABA) molecules on different active surfaces are studied by scanning tunneling microscopy and density functional theory calculations. ABA molecules deposited on Ag(111)/Ag(100)/Cu(100) held at room temperature lead to the decomposition of azide groups and the release of a N2 molecule per ABA molecule. Two residual segments of ABA molecules can interact with one Ag/Cu adatom to form a coordination dimer through the N-Ag/Cu-N coordination bond on different substrates. Different orientations with different symmetries can result in different nanostructures based on the dimers. Interestingly, the residual segments of ABA molecules can generate four Cu adatoms as the coordination center on Cu(100) to form a novel coordination complex after annealing, which is the first report for trapping four adatoms as a coordination center. The number and the species of adatoms captured can be changed to alter coordination structures. It expounds that various regulatory effects of different substrates lead to the diversity of nanostructures dominated by coordination bonds.

Efecto de diferentes sustratos en la aclimatación y costos de plantas micropropagadas de caña flecha (Gynerium sagitatum Aubl)

Con el fin de reducir los costos de adaptación ex vitro de plantas micropropagadas de caña flecha (Gynerium sagitatum Aubl.) cultivar “Criolla”, el efecto de tres sustratos (Turba, turba + arena y turba + cascarilla de arroz) sobre la supervivencia, el crecimiento y el costo de las plantas asociado al sustrato fueron evaluados. Las plantas fueron micropropagadas en medio MS semisólido adicionado con 0,5 mg L-1 de BAP. Después de remover el medio de cultivo, las plantas fueron transferidas en bandejas plásticas de 72 alveolos dispensadas con la mezcla de sustrato respectiva. Las bandejas fueron cubiertas con tapas plásticas transparentes durante 3 días. Las plantas fueron mantenidas en una casa malla con polisombra del 50% de luminosidad y dos riegos diarios de 1 minuto cada uno por nebulización durante 8 semanas. El diseño utilizado fue el de bloques al azar, los datos fueron analizados con ANOVA y los promedios separados con la prueba de separación de medias de Tukey. Los resultados permitieron evidenciar que la mezcla de sustrato formada por turba + arena resultó en incrementos significativos en el porcentaje de supervivencia, altura de planta y redujo en >35% el costo final de las plantas asociado al uso de sustrato durante la adaptación a las condiciones ex vitro.

The Physiological Parameters of Three Cordyline terminalis Cultivars as Influenced by Substrate and Deficit Irrigation

The effect of different substrates and deficit-irrigation intervals were explored on the physiological parameters of 3 Cordyline terminalis cultivars in a factorial experiment with 3 factors including 4 substrates, 3 irrigation intervals (2, 7, and 10 days) and 3 cultivars (green, red, and tricolor) in 3 replications. The results showed that plants had the highest growth under the irrigation interval of 2 days and the lowest growth under the irrigation interval of 10 days. The highest growth was obtained from plants grown in garden soil, and among cultivars, “tricolor” exhibited the highest growth, plant height, and leaf number. The interaction between substrate and irrigation interval revealed that plants grown in garden soil and irrigated every other day produced the highest chlorophyll and carotenoid content. Trilateral effects of “substrate × irrigation interval × cultivar” indicated that the highest catalase activity was related to “garden soil + perlite × irrigation interval of 10 days × Green.”

Effect of different substrates on Si and Ta co-doped Ga2O3 films prepared by pulsed laser deposition

In this study, the structure, morphology, electrical and optical properties of Si and Ta co-doped gallium oxide (Ga2O3) films deposited on (1 0 0) Ga2O3, (0 0 0 1) sapphire and quartz substrates by pulsed laser deposition are analyzed. The Si and Ta co-doped Ga2O3 film on Ga2O3 substrate possessed the best crystal quality with a high carrier concentration of 1.12 × 1020 cm−3 and a conductivity of 2.13 S·cm−1 compared to the sapphire and quartz substrates. The Si and Ta co-doped Ga2O3 films on different substrates exhibited high transmittance (>73%) above 300 nm and smooth film surface. The optical gap of Si and Ta co-doped Ga2O3 films on Ga2O3, sapphire and quartz substrates decreases from 4.89 to 4.85 eV, and the corresponding Urbach energy increases from 0.396 to 0.704 eV, so the homoepitaxial Si and Ta co-doped Ga2O3 film possess the best quality.

Forensic analysis of red lipsticks using ATR-FTIR spectroscopy and chemometrics

Lipsticks are used on routine basis, and due to its prevalence, it can be encountered at the crime scene as trace transferred evidence. Analyses of such exhibits can provide corroborative evidence to link the suspect with the victim or with the crime scene. In the present study, 38 different red shade lipsticks of 20 different manufacturers were analyzed using ATR-FT-IR (attenuated total reflectance-Fourier transform-infrared) spectroscopy. Chemometric methods: PCA (principal component analysis) and PCA-LDA (linear discriminant analysis), applied to provide objective interpretation of results resulted in 100% discriminating power and 81.48% correct classification respectively. The effects of different substrates on lipstick analyses, lipstick wear time for one day, and exposure to different environmental conditions were also studied. More research is required for linking lipstick smudges on different substrates with their source of origin using chemometric methods.

Substrates and Fertilization of Mamacadela

The Cerrado has fruit species of great potential of use in commercial systems of agricultural production. They are obliged to carry out studies on the production of seedlings, contributing to a perpetuation of these species. The objective of this study was to evaluate the effect of different substrates and different doses of Basacote® on the emergence and early development of B. gaudichaudii plants. The experiment was conducted in a greenhouse in the experimental area of the Goiano Federal Institute-Campus Ceres. Experiment 1 was composed of six treatments (six compositions) and experiment 2 consisted of 5 treatments (five doses of Basacote®). The experimental design was a randomized complete block with four replicates and 12 plants per experimental plot. The variables analyzed were emergence, height, lap diameter, number of leaves, root system length, survival rate and fresh and dry matter of the aerial part and root system. The substrate composed of bovine manure + Plantmax® + soil provides better conditions for growth and development of mamacadella plants. The mamacadela seedlings do not tolerate high levels of organic matter in the substrate. For the production of Brosimum gaudichaudii seedlings the use of the 6.48 g dose of Basacote® plant-1 is indicated.

Effect of Different Substrates on Soil Microbial Community Structure and the Mechanisms of Reductive Soil Disinfestation.

Reductive soil disinfestation (RSD) has recently attracted much attention owing to its effectiveness for controlling pathogens. In this study, we aimed to evaluate the effects of different C/N substrates on RSD and to explore the changes in microbial community structure during RSD treatment. The experimental set up included 10 groups, as follows: CK, without substrates; RSD treatments with alfalfa (Medicago sativa L.)[AL], maize (Zea mays Linn. Sp.) straw [MS], and rice (Oryza sativa L.) straw [RS], with three levels of addition (0.5% [L], 2% [M], and 5% [H]), yielding ALL, ALM, ALH, MSL, MSM, MSH, RSL, RSM, and RSH groups. Compared with CK, RSD treatments significantly increased the content of -N, and effectively eliminated the accumulated -N in the soil. The relative abundances of organic acid producers, including Clostridium, Coprococcus, and Oxobacter, in all RSD groups were significantly higher than those in the CK by day 21. Moreover, on day 21, Aspergillus and Fusarium in all RSD groups were significantly lower than those in the CK. In summary, RSD treatments clearly increased the relative abundances of organic acid generators and effectively inhibited pathogens; however, when the C/N was too low and the amount of addition too high, ammonia poisoning and rapid growth of some microorganisms (e.g., Pseudallescheria and Arthrographis) may occur.

Effect of different substrates on the mass production of vivo plantlets of smooth cayenne cultivar of pineapple (Ananas comosus) in the western highlands of Cameroon

Effect of different substrates on the mass production of vivo plantlets of smooth cayenne cultivar of pineapple (Ananas comosus) in the western highlands of Cameroon

Rapid identification of Sr on surfaces of metals, porous medium, transparent materials using single-shot laser-induced breakdown spectroscopy

Rapid threat analysis is essential in radiological terror scenes to protect workers and the public. 90Sr, a potential dirty bomb material, has been stolen multiple times. A conventional radiation detection is slow for detecting 90Sr that only emits β-ray. It rigorously interacts with matters and rarely reaches a detector. For fast analysis over large area after confirming the presence of radioactive Sr, laser-induced breakdown spectroscopy can be an attractive method. This study investigates the effect of different substrates on identifying Sr on their surface using single-shot. The thin layer of Sr on the forensic samples makes the single-shot analysis essential. The substrates include metallic (aluminium, stainless steels), porous (mortar, polyester), and transparent materials (poly(ethyl benzene-1, 4-dicarboxylate)). SrCO3, SrTiO3, and SrF2 are 3 target compounds selected based on historical theft cases. The limits of detection range over 1.09–19.06 μg/cm2. Stainless steel shows the lowest LOD at 407.77 nm for SrCO3 and SrF2. Higher standard error is explained by more heterogeneous Sr distribution. The transparent material shows the highest error. Additionally, potential ways to distinguish chemical compounds are suggested using Ti peaks and SrF vibration band. The applicability is discussed by comparing surface concentrations of Sr from terror and natural background.

Efeito do lodo de esgoto na produção e nutrição de mudas de angico-vermelho (<em>Parapiptadenia rigida</em> (Benth.) Brenan)

O objetivo do trabalho foi avaliar o efeito de diferentes substratos, contendo lodo de esgoto, no teor de macro e micronutrientes em tecidos vegetais (raiz e parte aérea) de mudas de Parapiptadenia rigida (Benth.) Brenan. Os tratamentos foram: T1 (50% substrato comercial Plantmax® + 50% cama de equino (composto orgânico), T2 (20% lodo de esgoto + 80% composto orgânico), T3 (40% lodo de esgoto + 60% composto orgânico) e T4 (60% lodo de esgoto + 40% composto orgânico). Decorridos 180 dias após a semeadura foram mensuradas as características biométricas de altura da parte aérea, diâmetro do colo, massa seca da parte aérea e radicular, e o índice de qualidade de Dickson. Também foram determinados os teores de macro e micronutrientes no sistema radicular e na parte aérea das mudas cultivadas. Observou-se que a ordem crescente do teor total dos macronutrientes avaliados no sistema radicular foi de N > K > Mg > Ca > P > S e na parte aérea Ca > N > K > P > Mg > S; para os micronutrientes, o teor no sistema radicular e na parte aérea foi de Fe > Zn > Mn > B > Cu. O uso do lodo de esgoto como substrato proporcionou mudas de melhor qualidade nutricional, com melhor crescimento e aumento de biomassa aérea e radicular.

A 3D‑scaffold of PLLA induces the morphological differentiation and migration of primary astrocytes and promotes the production of extracellular vesicles.

The present study analyzed the ability of primary rat astrocytes to colonize a porous scaffold, mimicking the reticular structure of the brain parenchyma extracellular matrix, as well as their ability to grow, survive and differentiate on the scaffold. Scaffolds were prepared using poly-L-lactic acid (PLLA) via thermally-induced phase separation. Firstly, the present study studied the effects of scaffold morphology on the growth of astrocytes, evaluating their capability to colonize. Specifically, two different morphologies were tested, which were obtained by changing the polymer concentration in the starting solution. The structures were characterized by scanning electron microscopy, and a pore size of 20 µm (defined as the average distance between the pore walls) was detected. For comparison, astrocytes were also cultured in the traditional 2D culture system that we have been using since 2003. Then the effects of different substrates, such as collagen I and IV, and fibronectin were analyzed. The results revealed that the PLLA scaffolds, coated with collagen IV, served as very good matrices for astrocytes, which were observed to adhere, grow and colonize the matrix, acquiring their typical morphology. In addition, under these conditions, they secreted extracellular vesicles (EVs) that were compatible in size with exosomes. Their ability to produce exosomes was also suggested by transmission electron microscopy pictures which revealed both EVs and intracellular structures that could be interpreted as multivesicular bodies. The fact that these cells were able to adapt to the PLLA scaffold, together with our previous results, which demonstrated that brain capillary endothelial cells can grow and differentiate on the same scaffold, could support the future use of 3D brain cell co-culture systems.

Evaluate on substrates for mass production of entomopathogenic fungus Beauveria bassiana (Balsamo)

The present investigation entitled “Mass Production of entomopathogenic fungai Beauveria bassiana (Metsch.) on liquid and solid media” was carried out at Bio Control Laboratory, Department of Entomology, Sardar Vallabhbhai Patel University of Agriculture and Technology, Meerut during 2018-19. In all there were eight treatments including control replicated thrice in a randomized block design. The results obtained in the study are summarized. The effect of different substrates for the mass production of Beauveria bassiana spore/ml was significantly higher recorded. Data recorded on 7, 14, 21, 28, 35 after the day after inoculation of various treatments in the, T10 Savoured dextrose broth (SDB), was the best treatment by bringing down the B. Bassiana production up to (49.48) spore/ml in liquid medium during the 2018-19 years. The other treatments in order of spore producing was with T11 Potato dextrose broth (PDB) (38.52), in liquid medium and solid medium in the treatment and T8 Cowpea Vigna unguiculata + Molasses + 1% YE + 1.0 g Dextrose (28.73), followed by with T7 Black gram Vigna mungo + Molasses + 1% YE + 1.0 g Dextrose (27.52 spore/ml, T5 Cowpea Vigna unguiculata + Molasses + 1% YE (17.53 spore/ml), T4 Black gram Vigna mungo + Molasses + 1% YE (14.87 spore/ml), T2 Cowpea Vigna unguiculata + Molasses (10.50 spore/ml), T1 Black gram Vigna mungo + Molasses (8.35 spore/ml), T9 Gram Cicer aeritinum + Molasses + 1% YE + 1.0 g Dextrose (3.92 spore/ml), T6 Gram Cicer aeritinum + Molasses + 1% YE (2.85 spore/ml) and T3 Gram Cicer aeritinum + Molasses respectively.

Substrates with organic residues in Fritillaria cirrhosa seedlings for bulbus production

China is abundant in organic residues from agricultural and forestry efforts. Bulbus Fritillaria cirrhosa D. Don (BFC) is a precious wild herb of Liliaceae that grows in the Tibetan area of China and the bulbs are used as a source of medicine. The shortage of germplasm resources restricts the development of traditional Chinese medicinal materials, so improved cultivation methods are urgently needed. The objective of this study was to study the effects of different substrates on the growth of F. cirrhosa seedlings. Sawdust and vermi-compost are common organic residues and were selected as nursery materials to supplement efforts to cultivate Fritillaria cirrhosa D. Don from ripe seeds and bulbs. The experiments were conducted in a plastic greenhouse in Ya’an of Sichuan Province from January to May 2013. Vegetative parameters of leaf length, leaf width, seedling fresh weight, seedling dry weight, and bulb size and fresh weight were measured. Additionally, the emergence ratio and preservation rate were calculated. The following results were obtained: (1) Sowing seeds of F. cirrhosa with 70% vermi-compost and 30% sawdust gave the best emergence rate, leaf length (60 days after seedling emergence, 60 DAS), and bulb dry weight (at harvest, 93 DAS). (2) The leaf nitrogen content (60 DAS) was positively correlated with the nitrogen content of bulbs (at harvest, 93 DAS). From the data, we concluded that forestry residues such as sawdust and vermi-compost can serve as excellent growing substrates of BFC seedlings.

Effects of different substrates on nitrogen and phosphorus removal in horizontal subsurface flow constructed wetlands.

This study aimed to explore the nitrogen and phosphorus removal performance of the horizontal submerged constructed wetland (HSCW) with Ti-bearing blast furnace slag (T). Another two HSCWs, with the converter steelmaking slag (G) and the stone (S) as wetland substrates, respectively, were simultaneously running as control. The results showed that the nitrogen and phosphorus removal capacities of the T-HSCW were generally better than those of another two HSCWs. When the hydraulic retention time (HRT) was 6days, the effluent concentrations of ammonia nitrogen (NH4+-N) and total nitrogen (TN) were 6.66mgL-1 and 14.02mgL-1, respectively, and the removal rates of NH4+-N and TN reached 77.54% and 71.07%, respectively. The T-HSCW had better removal efficiency of phosphorus. The effluent concentration of total phosphorus (TP) was lower than 0.3mgL-1, and the maximum removal rate could reach 98%. Through the characterization of the three substrates before and after experiments, it was found that the removal of nitrogen and phosphorus by T and G mainly relied on chemical adsorption, while S mainly relied on physical adsorption. Ti could also promote the absorption of nitrogen by plants and increase the nitrogen removal capacity of T-HSCWs.

Effects of different substrates on microbial electrolysis cell (MEC) anodic membrane: biodiversity and hydrogen production performance.

To investigate the effects of different substrates on the biodiversity and hydrogen production performance of microbial electrolysis cell (MEC) anodic membranes, the vital electroactive microorganisms (e.g. in MEC hydrogen production) were worth identifying. In the present study, single-factor experiments were performed. Sodium acetate, sodium propionate, sodium butyrate, glucose and starch served as different substrates for MEC anodic culture experiments under the same condition. The effects of different substrates on the bioactivity, biomass and hydrogen production performance of MEC anodic films were analyzed. Also, the effects of different microbial communities on hydrogen production were studied using 16S rRNA sequencing. According to the experimental results, all the five substrates here can serve as hydrogen-producing raw materials for MEC. All indicators revealed that sodium acetate, sodium propionate and sodium butyrate are excellent biofilm culture materials. The serious acidification of glucose and starch was identified at the same substrate concentration, and the environment of the culture medium was difficult to control, which affected the growth and metabolism of electroactive microorganisms. In comparison, sodium acetate was the best, achieving a maximum output of 23.4 mA and a maximum hydrogen content of 25.85%. The other four were ranked as sodium butyrate > sodium propionate > glucose > starch. According to the results of high-throughput sequencing, when sodium acetate, sodium propionate, sodium butyrate, glucose and starch served as substrates, the number of operational taxonomic units reached 464, 728, 636, 784, and 1,083, respectively. Furthermore, when MEC was cultured with sodium acetate, sodium propionate and sodium butyrate as substrates, the electroactive microorganism Desulfuromonas in the Proteobacteria would contribute the most to producing hydrogen. The relative abundance of the five substrates was ranked as sodium acetate > sodium butyrate > sodium propionate > glucose > starch, suggesting that the MEC anodic film cultured with sodium acetate as the substrate exhibited the best hydrogen production performance, and the starch showed the worst. It is noteworthy that Desulfuromonas was the most abundant species according to sequencing results. When glucose and starch served as substrates, they exhibited high biodiversity. The anodic membranes cultured with sodium acetate, sodium propionate and sodium butyrate were not as good as those cultured with glucose and starch, yet the electroactive microorganisms were up-regulated.

Simulation of the effects of different substrates, temperature, and substrate roughness on the mechanical properties of Al2O3 coating as tritium penetration barrier

Residual thermal stress in the system is a serious problem that affects the application of tritium permeation barrier coatings in fusion reactors. The stress not only determines the adhesion between coating and substrate, but also changes the properties of the material. In this study, finite element analysis was used to investigate the relationship between the residual thermal stress and the mechanical properties of Al2O3 tritium penetration barrier systems. Moreover, the residual thermal stress influenced by factors such as different substrates, temperature, and substrate roughness was also analyzed. The calculation showed that the hardness and elastic modulus increased with increasing compressive stress. However, the hardness and elastic modulus decreased with increasing tensile stress. The systems composed of Al2O3 coatings and different substrates exhibited different trends in mechanical properties. As the temperature increased, the hardness and the elastic modulus increased in an Al2O3/316L stainless steel system; the trend was opposite in an Al2O3/Si system. Apart from this, the roughness of the substrate surface in the system could magnify the change in hardness and elastic modulus of the coating. Results showed that all these factors led to variation in the mechanical properties of Al2O3 tritium permeation barrier systems. Thus, the detailed reasons for the changes in mechanical properties of these materials need to be analyzed.

Structural and tribological characterization of amorphous and crystalline titanium-nickel coatings

The interest in titanium-nickel (TiNi) alloys has increased with the discovery of the versatile properties of these alloys. In this study, the structural, mechanical and tribological properties of amorphous and crystalline TiNi coatings were investigated. The TiNi coatings were deposited with magnetron sputtering system. The crystallization process was conducted in a vacuum heat treatment furnace. The structural properties of the coatings were investigated with XRD, SEM and EDS analyses. Micro-hardness and pin-on-disc wear tests were used to obtain the mechanical and tribological properties of the coatings. AISI D2 steel, AISI 52100 steel, Aluminum 2024 alloy and copper were used as substrate materials, hence the effects of different substrates were also investigated. The highest coating hardness was obtained as 8.5 GPa and the lowest coefficient of friction value was obtained as 0.18. The tribological tests showed that the amorphous and crystalline TiNi coatings have different coefficient of friction and wear rate and using different substrate affects these properties.

Screening of new yeast Pichia manchurica for arabitol production.

Arabitol has several applications in food and pharmaceutical industries as a natural sweetener, dental caries inhibitor, and texturing agent. Newly isolated yeast strains from seawater, sugarcane plantation soil samples, and Zygosaccharomyces rouxii 2635 from MTCC were tested for arabitol production. The yield of arabitol was found to be higher in seawater isolate (24.6 g L-1 ) compared to two soil isolates (22.5 g L-1 ) and Z. rouxii (19.4 g L-1 ). Based on ITS 26S rDNA sequence analysis, the seawater isolate was identified as Pichia manchurica. In the present study, the effect of different substrates, trace elements, nitrogen sources, pH, and temperature on arabitol production was examined. Three different carbon sources viz. glucose, arabinose, and galactose were studied. Glucose was determined to be the best substrate for arabitol production (27.6 g L-1 ) followed by arabinose (13.7 g L-1 ) and galactose (7.7 g L-1 ). Maximum production of arabitol was observed at pH 6.0 (34.7 g L-1 ). In addition, arabitol production was high (35.7 g L-1 ) at temperature of 30 °C. Among the different concentrations of ammonium sulfate tested (3, 4.5, 6, 7.5, and 9 g L-1 ) concentration of 6 g L-1 resulted in higher arabitol Individual metal ions had no effect on arabitol production by this strain as compared to control. Results obtained in this study identify ways for improved arabitol production with natural isolates using microbial processes.

An ultra-wideband three-way power divider based on spoof surface plasmon polaritons

In this paper, an ultra-wideband spoof surface plasmon polaritons’ (SSPPs) power divider with simplest odds ratio (1:3) composed of hexagonal ring unit cells is proposed. The creation of electromagnetic waves with high confinement in a collision between periodically decorated metal and dielectric is a fundamental property of SSPPs. Flexibility, low loss, decreasing cross coupling, and ability for integration are other advantages of SSPP transmission lines. In order to realize the proposed 3-way power divider, first, a novel low loss and compact subwavelength hexagonal unit cell is presented. Next, a plasmonic waveguide is designed. To decrease the dielectric losses, the effect of different substrates on transmission coefficient is investigated too. In the best condition, we have a transmission line with an excellent operation in the frequency range of 3 to 11.8 GHz with a fractional bandwidth (FBW) of 119%. Then, an equal and in-phase 3-way power divider with good isolation between three output ports is designed in a wide frequency range of 2.5–8 GHz with an FBW of 105%. Finally, the proposed 3-way power divider is fabricated and tested in the laboratory. A good agreement between simulations and measurement results proves the functionality of design properly. The ultra wide-bandwidth, low loss, flexibility, and stable performance of this power divider prove its high capability compared with the state-of-the-art references. The proposed power divider can be utilized in developing an integrated plasmonic feeding network of antenna arrays in microwave and millimeter wave frequency bands.

Effects of physicochemical properties of different substrates on characters and yield of maize

A reasonable method was used to analyze the effects of different substrates on the characters and yield of maize, and to improve the quality and yield of maize. The effects of the maize characters and yield of national Fluvo-aquic soil fertility and fertilizer efficiency monitoring base were analyzed from 6 aspects: fertilization and combined application, fertilization and density coupling, controlled release fertilizer (CRF), fertilization level, fertilization depth and proportion, and the amount of organic manure (chicken manure). Data processing is done by using Excel2003 and SPSS17.0 software, and multiple comparisons are made by using Duncan’s new multiple range test method. The experiment of the influence factor of fertilization and combined application shows that the combination of NPK+ organic fertilizer (constant and high) can increase maize character ratio and NPK+ high-amount organic manure can increase maize yield. The experiment of the influence factor of fertilization and density coupling shows that the maize characters reached the optimum under the condition of high fertilizer. The yield of maize is highest when the density is 60000 plants /hm2 and the amount of fertilizer is 10.71kg, 3.57kg and 8.93kg per 667m2. The experiment of the influence factor of controlled release fertilizer shows that the characters of CRF V and CRF VI are the best. The control time of CRF III, CRF V, CRF VI, and CRF IV compound fertilizer is long, which can increase maize yield. The experiment of the influence factor of fertilizer level shows that the best character of maize is achieved by using the controlled release fertilizer of Agricultural University 450 kg/hm2 and two-topdressing 600 kg/hm2. In the process of corn production, the use of A-40 treatment (Volfertile controlled release fertilizer 600kg/hm2) and the one-time application of base fertilizer can increase the yield of maize. The experiment of the influence factor of fertilization depth and proportion show that the best combination is that seed fertilizer 20% urea, 40% diammonium phosphate and potassium sulfate were applied under the surface of 8cm and base fertilizer 40% urea, 60% diammonium phosphate and potassium sulfate were applied under the surface of 16cm. It can improve the character and yield of maize at the same time. The experiment of the influence factor of organic manure (chicken manure) shows that the amount of organic fertilizer (chicken manure) 26923kg per hectare with fertilizing 35kg per plot is the best amount of fertilizer, and the yield of maize increases. The proposed method can comprehensively and accurately analyze the effects of different substrates on the character and yield of maize, which can promote rational fertilization in maize and improve the quality and yield of maize steadily.