Eco-friendly Corrosion Inhibitor Research Articles

Experimental and theoretical insights into Artemisia Stems aqueous extract as a sustainable and eco-friendly corrosion inhibitor for mild steel in 1M HCl environment.

The present research demonstrates an innovative investigation of environmentally friendly mild steel (M-steel) corrosion inhibition using the artemisia stems aqueous extract (ASAEx) as an inhibitor in hydrochloric acid 1M. The standard extraction technique of hydrodistillation was used for producing the aqueous solutions of ASAEx. To assess the ratios of the chemical components, phytochemical screening was used to identify the stems of this plant. We used a variety of methods and techniques in our research on corrosion inhibition, including weight loss measures, surface analysis methods like XPS and SEM/EDS, electrochemical testing like PDP and EIS, as well as computational lead compound evaluation. Maximum inhibitory efficacy was achieved with 400mg/L ASAEx in 1M HCl at 303K, i.e. 90%. The PDP investigation verified the mixed-kind inhibitor status of the ASAEx extract. To describe the surface of M-steel, fitting and synthetic data were used to identify a constant phase element (CPE). SEM surface analysis was also used to detect the ASAEx effect on the surface of M-steel. X-ray photoelectron spectroscopy (XPS) analysis shows the presence of trace molecules of ASAEx on M-steel surface characterizing the bands in Maj-ASAEx (major compound of ASAEx). Density functional theory (DFT) and molecular dynamics simulations (MDs) were used in computational chemistry to clarify the adsorption mechanism and inhibitory impact.

Synthesis and characterization of selenium-polyvinyl alcohol nanoparticles as eco-friendly corrosion inhibitor for carbon steel in 1.0 M H2SO4

Selenium nanoparticles capped with polyvinyl alcohol (Se-PVA NPs) have been synthesized by chemical reduction using ascorbic acid as a reducing agent. The synthesized nanoparticles were characterized using XRD, DLS, zeta potential, FT-IR, and TEM analysis and found to be stable. The solution of Se-PVA NPs was used as a carbon steel corrosion inhibitor in 1.0 M H2SO4. The effect of the presence of Se-PVA NPs in the corrosion medium was studied by potentiodynamic polarization and gravimetric analyses In the presence of Se-PVA NPs with a concentration of 600 ppm at 303 K, corrosion inhibition efficiency values of 92.86 % and 92.3 % were recorded by potentiodynamic polarization and gravimetric analysis methods, respectively. Over the Se-PVA NPs concentration range 100–600 ppm, it was found that increasing the concentration increases the inhibition efficiency, while the temperature has an adverse effect, inhibition efficiency values of 80.0 % was recorded at 323 K for the 600 ppm Se-PVA NPs solution. The potentiodynamic polarization measurements suggested that Se-PVA NPs work as a mixed-type inhibitor. The corrosion inhibition process was confirmed by testing the used specimens’ metal surface using SEM and AFM techniques, which showed that the acidic medium’s negative impact (distortion and roughness) on the carbon steel surface was reduced significantly in the presence of Se-PVA NPs. The inhibitor’s adsorption on the metal surface was studied. It obeys the Langmuir isotherm with a mixed-type adsorption process. The related kinetic and thermodynamic parameters were investigated.

Origanum Grosii Extracts as Novel Eco-Friendly Corrosion Inhibitors for Mild Steel In HCl Medium.

Two green inhibitors extracted from an endemic species (Origanum grosii (Og)) using two solvents of different polarity (water and ethanol), OgW (aqueous extract) and OgE (ethanolic extract), were used for the anticorrosion of mild steel (M steel) in a 1 M HCl medium. Anticorrosive performance of OgW and OgE was assessed using standard electrochemical techniques, EIS/PDP measurements, weight loss method and SEM/EDX surface analysis. The results show that OgW achieves a maximum inhibition efficiency of 92 % and that the extract in aqueous medium (more polar) is more efficient than the extract in ethanolic medium (less polar). Both extracts act as mixed inhibitors and their corrosion process is predominantly governed by a charge transfer. Concentration and temperature effect was studied and shown that they are two antagonistic parameters for the evolution of inhibitory effectiveness of both OgW and OgE. The adsorption isotherms of the two inhibitors OgE and OgW obey to the Langmuir adsorption model. Moreover, the examination of SEM images and EDX spectra support a deposit of both extracts on the metal surface by an adsorption phenomenon. Besides, theoretical approach of the molecular structures of the major compounds M-OgW and M-OgE and inhibition efficiency was examined via DFT calculations and molecular dynamics simulations and it was consistent with the experimental findings.

Exploring Ginkgo biloba Extract's Green Corrosion Inhibition Effects on Q235 Steel in H2SO4 Environments

The corrosion inhibition properties of Ginkgo biloba extract on Q235 steel in 0.5M H2SO4 solution were comprehensively investigated using weight loss measurements, electrochemical techniques, surface characterization, and quantum chemical calculations. The results demonstrate that Ginkgo biloba extract acts as an effective green corrosion inhibitor, with inhibition efficiencies reaching up to 96.54% at a concentration of 0.7g/L. The inhibition efficiency increased with increasing extract concentration and temperature. FTIR and LC/MS analyses revealed that the extract contains various phytochemical constituents, including flavonoids, terpenoids, and other polyphenolic compounds, which contribute to its corrosion inhibition properties. The adsorption of the extract compounds on the steel surface followed the Langmuir adsorption isotherm, with a negative value of the standard free energy of adsorption, indicating a spontaneous and stable adsorption process involving both physisorption and chemisorption. SEM and XPS analyses confirmed the formation of a protective film by the adsorbed extract compounds, which acts as a barrier, preventing the direct contact between the aggressive solution and the steel substrate. The film also alters the wettability of the metal surface, making it more hydrophobic and further enhancing the corrosion inhibition efficiency. Quantum chemical calculations showed that flavonoids, particularly quercetin, contribute significantly to the corrosion inhibition performance due to their high reactivity, strong dipole moment, and stable adsorption on the Fe(110) surface. These findings provide valuable insights into the development of sustainable and eco-friendly corrosion inhibitors for the protection of metal structures in acidic environments.

Evaluating the efficacy of newly synthesized amino acid derivatives as corrosion inhibitors in acidic solutions

Three benzimidazole derivatives, with tryptophan (BIT), tyrosine (BIY), and histidine (BIH) amino acid units, have remarkable protective properties as eco-friendly corrosion inhibitors for steel under severe acidic conditions. At a temperature of 303 K, the corrosion inhibition efficiency of BIT, BIY, and BIH at a concentration of 10 mM is 90.09 %, 92.53 %, and 93.43 %, respectively. Electrochemical tests indicate that the adsorption of these substances on the substrate leads to an increase in charge transfer resistance and interfacial electric double layer thickness. This effectively hinders the dissolution of metal and the evolution of hydrogen. The analysis of the surface structure and appearance using SEM-EDS indicates that the inhibitors have the ability to create a protective coating through both chemical and physical bonding, effectively protecting the metal from corrosive substances. Theoretical calculations, such as Density Functional Theory (DFT) and Natural Bond Orbital (NBO) analysis, along with FUKUI analysis, help identify active sites and adsorption configuration. This enhances our understanding of the corrosion mitigation mechanism. These findings align with the experimental conclusion that the formation of a stable protective film contributes to superior inhibition performance against acidic corrosion conditions.

Corrosion Inhibition by Musa paradisia ca Peel Extract for SS 304 in 1 M Hydrochloric Acid Solution

Objectives: To study the corrosion inhibition of Musa paradisiaca peel (MPP) extract for stainless steel (SS) 304. Method: The corrosion rate of stainless steel was studied by weight loss measurements in a 1 M hydrochloric acid solution at different concentrations of MPP inhibitor and at various temperatures, e.g., 298 K, 303 K, and 308 K. Scanning electron microscopy (SEM) was used to study the morphology of the films created on the stainless steel surface in various immersion media at various immersion times. Both potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) examined inhibition efficiency. Langmuir adsorption isotherm studied inhibitor surface adsorption SS 304. Findings: The corrosion rate and inhibition efficiency depend on the concentration of the inhibitor and the temperature. When there is an increase in the concentration of the inhibitor, inhibition efficiency increases, e.g., at 50 mg/l concentration, 77% inhibition efficiency, and at 200 mg/l concentration, 87% inhibition efficiency at 298 K. When temperature increases, inhibition efficiency decreases, e.g., at 200 mg/l concentration, 87% at 298 K, 85% at 303 K, and 83% at 308 K. Novelty: This article provides an eco-friendly corrosion inhibitor for stainless steel 304. Musa paradisiaca peel extract inhibitor was previously used for iron, mild steel, and carbon steel but was not used for stainless steel 304 in 1 M HCl. Keywords: Corrosion, Stailess stell, Inhibitor, Acid

Protein-derived carbon dots as green corrosion inhibitors for carbon steel in sulfuric acid solution

At present, the development of eco-friendly corrosion inhibitors (CIs) is considered an important and attractive method for controlling the corrosion of metals in acidic media. In this study, protein-derived carbon dots (P-CDs) were prepared via hydrothermal reaction using protein as the raw material, and the corrosion inhibition performances of P-CDs for carbon steel (CS) were investigated systematically. The electrochemical test results showed that the corrosion inhibition efficiency of 500 mg/L P-CDs on CS reached 95.1 % in 0.5 M H2SO4, and the corrosion inhibition efficiency was enhanced to 98.1 % after 8 h of immersion time. The composition and characterization of P-CDs was analysed using Fourier Transform Infrared Spectroscopy (FTIR), Ultraviolet Spectroscopy (UV), X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Atomic force microscopy (AFM) and scanning electron microscopy (SEM) characterization showed that the surface of CS with P-CDs was smoother than that without P-CDs, and that P-CDs was able to adsorb on the surface of CS to form a protective layer, thereby inhibiting corrosion. Adsorption studies indicate that P-CDs form a protective layer on the surface of CS through both physisorption and chemisorption. Overall, these findings demonstrate that P-CDs exhibit superior protective effects against the corrosion of CS in 0.5 M H2SO4.

Turmeric (Curcuma longa) Extract Characterization for Corrosion Inhibitor using Microwave-Assisted Extraction

<p>Metallic corrosion, the deterioration process induced by the interaction between metals and corrosive environments, poses a significant challenge to material integrity and longevity. Corrosion inhibitors have been identified as an effective approach among various mitigation strategies. Natural extracts, such as those derived from turmeric/<em>Curcuma longa</em>, have garnered attention for their potential as eco-friendly corrosion inhibitors. This study endeavors to extract, characterize, and evaluate turmeric extract's efficacy as a corrosion inhibitor within a 30% acetic acid solution. Employing microwave-assisted extraction with a 96% ethanol solvent facilitated the isolation of the extract, which was subsequently subjected to qualitative analysis through phytochemical screenings and Gas Chromatography-Mass Spectrometry (GC-MS). These analyses confirmed the presence of antioxidative phytochemicals, including alkaloids, terpenoids, turmeronoids, curcumin, sesquiterpenoids, and phenols. The corrosion inhibitory properties of turmeric extract were assessed via immersion and flow loop experiments, revealing a notable reduction in corrosion rates—from 0.1540 mm/year to 0.0801 mm/year in immersion tests and from 5.3747 mm/year to 2.9369 mm/year in flow loop tests. Such outcomes underscore turmeric extract's potential as a viable corrosion inhibitor, attributed primarily to the chemical interactions facilitated by curcumin's phenolic and carbonyl groups with the metal surface, thereby enhancing protective efficacy. The inhibitor efficiency was quantified at 47.9743% and 45.3565% for immersion and flow loop tests, highlighting the extract's substantial inhibitory performance.</p>

Detailed DFT/MD simulation, QSAR modeling, electrochemical, and surface morphological studies of self-assembled surfactants as eco-friendly corrosion inhibitors for copper in 1 M HNO3 solution

Three novel self-assembled phenyl pyrazole cationic surfactant derivatives, coded as SA-6, SA-12, and SA-18, were synthesized, structure confirmed, and examined as eco-friendly corrosion inhibitors for Cu in 1 M HNO3 electrolyte using open circuit potential (OCP), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) measurements. The efficacy of these surfactants was pointedly influenced by dosage (5 × 10−5 M − 1 × 10−3 M), attaining a maximum of 90.9 %, 92.9 %, and 94.5 % for SA-6, SA-12, and SA-18, respectively, at 1 × 10−3 M. The fact that the highest shift in corrosion potential (Ecorr) is so minor suggests that the compounds under investigation are inhibitors of the mixed type (anodic/cathodic). The high value of Kads and the negative ΔGadso value (−35.0, −35.8, and −36.8 kJ mol−1) suggests that the SA-6, SA-12, and SA-18 inhibitors have a strong and spontaneous tendency to adsorbed onto the Cu substrate. The development of the self-assembled surfactant defensive film on the Cu substrate was morphologically verified by atomic force microscopy (AFM). The studied self-assembled surfactants adsorbed physically and chemically according to Langmuir isotherm model. Quantitative structure–activity relationship (QSAR) was used to construct the prediction model for SA-6, SA-12, and SA-18′s anti-corrosion properties, while density functional theory (DFT) calculations were used to determine the chemical descriptors linked to the frontier molecular orbitals (FMOs). It was shown that the results of the computational and electrochemical experiments were highly consistent.

Assessment of Syzygium cumini (Jamblang) fruit extract as an ecofriendly corrosion inhibitor for low-carbon steel in 3.5% NaCl medium

Assessment of Syzygium cumini (Jamblang) fruit extract as an ecofriendly corrosion inhibitor for low-carbon steel in 3.5% NaCl medium

From Waste to Protection: A Green Industrial Recycling Approach to Generate an Eco-Friendly Corrosion Inhibitor for 304 Stainless Steel in Saline Solutions

From Waste to Protection: A Green Industrial Recycling Approach to Generate an Eco-Friendly Corrosion Inhibitor for 304 Stainless Steel in Saline Solutions

Electrochemical analysis of corrosion inhibition shallot leaf (Allium cepa) extract on mild steel in acidic medium at different immersion times

Plant derivatives as eco-friendly corrosion inhibitors are currently greatly interested in much research. Shallot leaf (Allium cepa) was utilized in 0.1M HCl as a corrosion inhibitor of mild steel. The functional groups present in the macerated extract were subsequently identified using an FTIR test. Electrochemical tests such as tafel polarization and EIS were carried out to determine the corrosion inhibition performance of shallot leaf extract on the SS400 steel. The results of the electrochemical analysis show that shallot leaf extract can inhibit mild steel up to 94% at a concentration of 500 ppm. Furthermore, the addition of SLE reduces surface damage of mild steel, which can be seen by SEM.

Electrochemical studies, adsorption behavior, and spectroscopic analysis of vanadyl complex of bis(1-(pyridin-2-yl)ethylidene)malonohydrazide as efficient eco-friendly corrosion inhibitor for low carbon steel in 1M HCl

Corrosion is a destructive attack that can effect on a substance. One of the most important problems is corrosion losses, which can cause a loss of 10% of the metallic output every year. A novel VO+2 complex of N1, N3-bis(1-(pyridin-2-yl)ethylidene)malonohydrazide [(VO)2(L)(OH)2].H2O has been prepared and utilized as corrosion controller for Low carbon steel (LCS) in hydrochloric acid solution. Chemical (Weight loss (WL)), electrochemical (electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PP)) are utilized to examine the effectiveness of prepared [(VO)2(L)(OH)2].H2O (VOL). The inhibition efficacy improved with increasing the VOL doses. The maximum efficacy of the investigated inhibitor is 96.1% at 21×10−6 M. However, at 21×10−6 M, the efficacy decreased from 96.1% to 84.4% when the temperature elevated from 298 to 318 K. The adsorption of VOL on the LCS surface was used to explain the inhibition. According to the values of ∆G°ads, which ranged from 25.8 to 21.5 kJ mol−1, the adsorption of the VOL on the LCS surface is physical adsorption. Analyzing the polarization curves of synthesized inhibitors revealed that they were mixed-type inhibitors. LCS was found to be surface inhibited when coated with a thin film of inhibitors, and surface morphology was assessed by different techniques such as scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and atomic force microscope (AFM), and X-ray photoelectron spectroscopy (XPS). Density functional theory (DFT) was employed to explain the nature of the interface among VOL and LCS surfaces. It was found that all of these used tests agreed with each other.

Water-soluble N-methylpolypyrrole nanoparticles as a highly efficient eco-friendly corrosion inhibitor for carbon steel in 3.5 wt% NaCl solution

Metal corrosion is a significant problem in industrial units that can disrupt operations and increase costs. A corrosion inhibitor (CI) is an effective solution to this issue. Organic compounds are suitable and efficient CIs for carbon steel (CS) against corrosion. Among them, intrinsically conducting polymers (ICPs) are gaining traction in numerous industries due to their eco-friendliness, low cost, high stability, and simple production process. One of the major obstacles associated with employing ICPs as CI is their limited solubility in aqueous media. The present study aimed to synthesize water-soluble N-methylpolypyrrole (NmPPy) nanoparticles through a facile, rapid, and cost-effective approach. The successful synthesis of the NmPPy nanoparticles has been confirmed through characterization using scanning electron microscopic (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV–vis spectra. The effectiveness of NmPPy nanoparticles in protecting CS against corrosion in a 3.5 wt% NaCl solution with varying concentrations at ambient temperature was evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) measurements. The findings from the study indicate that the NmPPy nanoparticles exhibit a noteworthy corrosion protection capacity for CS. At a concentration of 300 mg L−1, the NmPPy acted as a mixed-type inhibitor and yielded around 95% inhibition efficiency. Moreover, the adsorption behavior of the particles followed the Langmuir isotherm model with chemical adsorption. Surface morphology analysis techniques, including scanning Kelvin probe (SKP), field-emission scanning electron microscopy (FESEM), and energy-dispersive X-ray spectroscopy (EDX), have confirmed the development of a protective film on the CS. The analysis indicates that the CS has a smooth surface, and the NmPPy nanoparticles exhibit high inhibition efficiency. Therefore, the water-soluble NmPPy nanoparticles effectively inhibit CS corrosion in NaCl solution. They hold immense promise for the future development of advanced protective materials.

Exploring metasequoia glyptostroboides leaf extract as an eco-friendly corrosion inhibitor for Q235 steel

This study demonstrates the excellent capability of Metasequoia glyptostroboides leaf extracts to act as effective and eco-friendly corrosion inhibitors for Q235 mild steel surfaces across simulated 1 M hydrochloric acid conditions, attributable to diverse terpenoid and polyphenolic phytochemicals. Gas chromatographic profiling indicated multiple bioactive compounds including 13.92% camphene, 15.59% naringenin and 9.12% trans-caryophyllene. Weight loss analysis showed 500 ppm optimal extract concentration attaining 83.62% inhibition. Potentiodynamic scans revealed predominately anodic control with corrosion currents reducing from 432 to 92 μA/cm2 alongside enhanced polarization resistances from 19.7 to 132 Ω/cm2 substantiate surface protective film depositions. FTIR and UV-Vis spectroscopy indicates chelating flavonoids aid inhibition through iron complexation. SEM micrographs displayed smoother substrate morphology versus cracked unmodified surfaces while atomic force metrology reduced roughness from 853 nm to 352 nm. Incremental EDX nitrogen peaks and contact angle escalations from 36° to 72° further supplements molecular adsorption phenomena. Remarkable performance retention even at higher temperatures above 50% at 338 K and detailed mechanistic interpretations conclusively verify Metasequoia's candidature as abundant natural sources for sustainable anticorrosion formulations across industrial usage contexts.

1,4-Phenylenediamine-based Schiff bases as eco-friendly and efficient corrosion inhibitors for mild steel in HCl medium: Experimental and theoretical approaches

The application of Schiff bases as corrosion inhibitors is one of the economic, practical, and effective techniques to retard metal corrosion in aggressive environment. The continuous exploration of novel, lower-cost, more efficient, and eco-friendly corrosion inhibitors is an everlasting pursuit of excellence. In this study, two 1,4-phenylenediamine-based single Schiff base isomers, (E)-4-((pyridin-2-yl-methylene)amino)aniline (PMAA2) and (E)-4-((pyridin-3-ylmethylene)amino)aniline (PMAA3), were synthesized by one-step reaction. The corrosion inhibition mechanism and structure–activity relationship of PMAA2 and PMAA3 for mild steel in HCl solution were analyzed using electrochemical and weight loss experiments, morphology analysis, density functional theory (DFT) calculation, and molecular dynamic (MD) simulation. The results demonstrated that the corrosion inhibition efficiency of PMAA2 and PMAA3 exhibited an increasing trend with the elevation of inhibitor concentration while showing a slight decrease with the temperature rise. The optimal corrosion inhibition efficiency for 800 mg L−1 PMAA2 and PMAA3 in 1.0 mol L−1 HCl solution is 90.88 % and 91.78 % at 303 K respectively by using weight loss experiment. The electrochemical experiment results indicated that PMAA2 and PMAA3 are mixed-type corrosion inhibitors, with a preponderant control of anodic dissolution. Both the thermodynamics of adsorption and the kinetic of corrosion reaction were evaluated and discussed in detail. Their adsorption upon mild steel complies with Langmuir adsorption isotherm and is involved in phys- and chemisorption concurrently. The results from surfacemorphologyanalysis exhibited that a dense protective film on the surface of mild steel is formed through inhibitor adsorption, which results in changes in the hydrophilicity and hydrophobicity of the metal surface. The calculations of DFT and Fukui index also indicated that both the neutral and pronated species of PMAA2 and PMAA3 possess donor–acceptor interactions with the surface iron atoms through both forward and back-donations. Furthermore,MD simulations further revealed that the neutral molecules as neat-flat and parallel orientation are adsorbed strongly on the Fe (110) surface but the pronated species perform in bent fashion on the Fe (110) surface. Based on the experimental analysis and the theoretical calculation, a possible adsorption and corrosion inhibition mechanism was proposed rationally. These findings display good correlations between the experimental investigation and the theoretical computation and are of fundamental importance to understanding the adsorption and corrosion inhibition mechanisms of the inhibitors.

Rosmarinus officinalis l. Oil as an Eco-Friendly corrosion inhibitor for mild steel in acidic Solution: Experimental and computational studies

In this research, Rosmarinus officinalis L. (ROL) essential oil extracted from the plant was initially introduced as a green anti-corrosion agent for mild steel (MS) in a 1 M HCl solution. The components of the extract were identified using gas chromatography-mass spectrometry (GC–MS) and UV–Vis method. Gravimetric and electrochemical techniques (EIS and PDP) demonstrated that ROL inhibited steel corrosion by 90 % at a concentration of 1.5 g/l. The PDP experiment indicated that ROL essential oil acted as a mixed-type inhibitor with a cathodic predominance. The morphological and elemental characteristics of the metal surface were examined using SEM and EDX, revealing the formation of a corrosion-resistant film on the metal surface. The inhibited corrosive solutions were characterised before and after immersing MS using UV–visible spectrophotometry, indicating the possibility of iron-ROL complex formation. Finally, theoretical calculations using DFT, MC, and MD simulations were conducted and correlated with experimental results.

BMPD-Assisted Enhancement of Corrosion Resistance of Carbon Steel: Experimental and First-Principle DFTB Insights

Green corrosion inhibitors are gaining recognition for their sustainable, cost-effective, and environmentally friendly nature, along with their impressive water solubility and high corrosion inhibition efficiency. They offer a promising solution to combat corrosion issues that plague various industries. However, to harness the full potential of these eco-friendly corrosion inhibitors, a profound understanding of their development and underlying mechanisms is essential. This knowledge is the key to paving the way for the next generation of corrosion protection materials. Herein, a comprehensive study was conducted to understand the adsorption, corrosion inhibition efficiency, and stability of 3-benzoyl-4-hydroxy-2,6-bis(4-methoxyphenyl)-4-phenylcyclohexane-1,1-dicarbonitrile (BMPD). This study investigated the performance of BMPD applied to carbon steel (CS) in 1 M hydrochloric acid (HCl) solution. The corrosion inhibition effect was examined using weight loss, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and theoretical studies. The surface morphology was also characterized and Tafel polarization analysis shows that BMPD is a mixed inhibitor. The results obtained by electrochemical impedance spectroscopy indicate that the inhibitory effect increases with increasing inhibitor concentration. The adsorption of BMPD on a CS surface obeyed the Langmuir adsorption isotherm. Thermodynamic parameters were calculated and discussed. Furthermore, this study involved a comprehensive computational analysis of the BMPD compound. Using quantum chemical calculations and first-principle simulations, we delved into the structural and electronic properties of BMPD as well as the interfacial adsorption mechanisms between the studied molecule and the iron surface.

Experimental Study and Response Surface Methodology of Azo Dye as an Eco-Friendly Corrosion Inhibitor for Stainless Steel in a Chloride Solution

Experimental Study and Response Surface Methodology of Azo Dye as an Eco-Friendly Corrosion Inhibitor for Stainless Steel in a Chloride Solution

An overview of green corrosion inhibitors

Corrosion inhibitors that are eco-friendly have become increasingly important due to growing environmental awareness and various regulations that restrict the use of conventional corrosion inhibitors because of their harmful effects. Natural products are a great source for making eco-friendly corrosion inhibitors since they contain elements such as O, C, N, and S, which are essential for forming organic compounds that adhere to metals or alloys. These compounds form a protective film that prevents corrosion. The use of green chemistry and new synthetic methods for producing green chemicals has led to the development of new green corrosion inhibitors. These inhibitors can adsorb substances, making them effective in a variety of environments while also protecting metals and alloys that are not chemically related.