Earth Materials Research Articles

Quantification and Optimization of Compaction Energy Used in Earth Construction: Case of Static and Dynamic Compaction

Earth construction is a sustainable and environmentally friendly approach to building. In addition to their good thermal performance, earth materials are abundant, inexpensive, and readily available, reducing the need for resource-intensive materials like concrete and steel. Regarding the construction process of earth structures, which is based on compaction, there is often a difference between the laboratory compaction process and the onsite one. The energy consumed onsite to produce earth structures is still approximative and uncontrolled, which affects considerably the mechanical performances of earth walls. Then, the investigation of the optimal compaction energy is necessary. To optimize the on-site compaction energy used in rammed earth (RE), an experimental study is carried out to compare the dynamic compaction usually applied to produce RE walls to the static compaction using a mechanical press. By considering increasing dynamic and static energies, the physical and mechanical properties are analyzed for each case. The obtained results show that RE walls can be replaced by prefabricated pressed earth blocks where the compaction energy is reduced by 60% and the compressive strength is enhanced by 70% using static compaction, thus achieving 4 MPa without stabilization. This solution allows to reduce the execution time and to control the quality of earth buildings.

Existing evidence on the potential of soils constructed from mineral wastes to support biodiversity: a systematic map.

The development of cities and transport infrastructure produces a large volume of mineral waste (e.g. excavated earth material). At the same time, cities are increasingly trying to develop green infrastructures, given the ecosystem services they provide to people, but this comes with considerable economic and environmental costs associated with the transfer of fertile soil from rural areas to cities. In a circular economy approach, the reuse of mineral waste to build fertile soil is a substantial opportunity to reduce the economic and environmental costs of both mineral waste management and green infrastructure development. Soils constructed from these materials (constructed Technosols) must be able to support vegetation growth and become a suitable living environment for soil organisms. This requires ecological engineering to maximise the potential of constructed soils for biodiversity, both from a taxonomic and functional perspective. In this context, we systematically mapped the evidence related to the ability of soils constructed from mineral wastes to support biodiversity. We gathered published and grey literature through searches in two publications databases (Scopus and Web of Science Core Collection), one search engine (Google Scholar), nine organisational websites and through a call for literature. Titles, abstracts, and full-texts were successively screened using eligibility criteria. All included studies were described with coded variables and a database was produced. The extent of evidence was assessed and knowledge clusters and gaps were identified. The searches yielded 9265 articles, and 153 articles were retained after the screening process. More than half of these articles were from European countries, with France leading the field with 40 articles, followed by Spain (15 articles) and Italy (10 articles). Most of the articles (75%) were produced after 2015. The main reasons for constructing soils from mineral waste were for mine rehabilitation (35%), waste recycling (16%) and experimental purpose (15%). The 153 articles were divided into 1962 studies, a study being a combination of a taxon, an intervention (i.e. soil construction) and a measured outcome. Among these studies, the most studied biological group is plants (69% of studies) and especially herbaceous species (32%), followed by microorganisms (17%) and invertebrates (14%). The most used type of mineral waste is mine waste (31% of studies) followed by excavated soil (16%) and demolition waste (14%). Finally, the most frequently measured outcome is plant growth (42% of studies), followed by organism abundance (16%) and diversity (10%). Three main knowledge clusters were identified which could be addressed in the future for full synthesis of the results: (1) How welldo plants grow in soils constructed from mineral wastes? (2) What is the potential of soils constructed from mineral wastes to support biodiversity? and (3) How do microbial communities develop in soils constructed from mineral wastes? There is a lack of studies investigating several biological groups at the same time: only 6 articles out of 153 investigated the response of both plants, invertebrates and microorganisms to soil construction. More research is therefore needed on the ability to support a diversity of organisms.

[Ce3+-Pr3+-Nd3+]:CsPbI2.2Br0.8 stable energy system for photonic and electrical performance upgradation in multitudinous applications

Adopting an integrated and consolidated strategy to energy generation, conversion, and storage is linked to energy sustainability in the modern day. Current investigation explores the lanthanide triple doping mechanism coupled with temperature optimization using (cerium, praseodymium, and neodymium)-oxide to modify CsPbI2.2Br0.8 forming the stable [Ce3+-Pr3+-Nd3+]:CsPbI2.2Br0.8 (CPN:CPVSK) hetero-system. CPN:CPVSK thin films have remarkable optical output for the prolonged duration of 28 days with the band gap energy spanning around 1.64–1.67 eV. These thin films have cubic phase with the 65.44 nm average crystallite size and these thin films have excellent surficial binding without any holes or cracks. CPN:CPVSK was employed as an active light trapping material inside perovskite solar cells processed and analyzed at ambient conditions. The temperature increment from 100 to 200 °C subsequently lead to improvement in efficiency from 6.91% to 15.5% with considerable improvement in fill factor. CPN:CPVSK effectively generated pure H2 with the minor overpotential and Tafel slope values of 132 mV and 122.3 mV dec−1 while the O2 production activity was unappreciable. CPN:CPVSK is a potential material for battery application with the excellent unit capacity of 354 mA H g−1 and lower Rs of 0.44 Ω. Rare earth doped perovskite material is a sustainable, cost effective, and facile to prepare with the greater candidature for practical applications.

Terra Forma Speculative Mapping

This visual essay discusses an object-map of Paris basin soil and subsoil, commissioned for the Element Terre exhibition within the Architecture and Landscape Biennial 2022 (Versailles, France). To create this map, we contacted actors and researchers whose work is related to soil: earth scientists, materials specialists, and human habitat specialists. Using a model from the book Terra Forma: A Book of Speculative Maps, we designed a specific reference system, the ‘soil’ model, to map entities, movements and conflicts in the underground environment(s). The resulting map aims to reveal what is going on beneath our feet, what is hidden from view, to go beyond representations that are limited to the surface.

Geophysical exploration to assess leachate percolation and aquifer protectivity within hydrogeological units at a major open dump in Eket, Nigeria

Leachate contamination was investigated with geo-electrical methodologies at a major open dump in Eket, Southern Nigeria. The open dump is heavily polluted, degrades the environment, and has released toxins into the atmosphere. To model leachate percolation, vertical electrical soundings (VES) and electrical resistivity tomography (ERT) surveys, constrained by well lithological information, were undertaken at the site. The field equipment used for the geo-electrical investigations was the ABEM Terrameter SAS 1000 and its accessories. WINRESIST software was employed to process the sounding data and RES2DINV was employed to generate 2D tomograms indicating subsurface heterogeneity. Results obtained from sounding data showed that the subsurface had three lithological units (motley topsoil, fine sand and coarse sand), with coarse sand being the main hydrogeological unit comprising water-bearing formations. The first layer’s resistivity ranged from 84.9 – 625.4 Ωm with a mean of 360.4 Ωm; the second layer’s resistivity ranged from 7.5 – 1008.1 Ωm with a mean of 142.9 Ωm, and the third layer’s resistivity values ranged from 11.6 – 745.6 with a mean of 205.5 Ωm. The 2D resistivity tomograms indicated that leachate had percolated into groundwater resources. This is concerning as groundwater is the major water resource within the area. Measures of the Dar-Zarrouk indices and electrical reflection co-efficient indicated that the highly heterogenous region had moderate aquifer protective capacity and moderate aquifer potentiality. To mitigate contamination at the site, sanitary landfills, phyto-remediation, impermeable liners, or impermeable earth materials should be employed to diminish the rate of leachate percolation.

Comparison of preloading by fill surcharge and ground water lowering based on a case study

AbstractPreloading by fill surcharge is a widespread and rather simple ground improvement method for the anticipation of settlements brought on by additional loads from new constructions. The magnitude as well as the area of surcharge is adapted to the final construction, whereas in general about 120–140 % of the final load is applied as surcharge load. Both factors have an influence on the effective depth for which soil improvement and an anticipation of settlements is possible, respectively. In case of large construction areas with significant loads, for which a greater depth effect needs to be considered, a large earth volume for surcharge is necessary. It is a cost‐intensive and environmental‐relevant aspect, when earth material is not available in sufficient amount and near distance of the construction site. In order to avoid this, it was investigated whether lowering the in situ groundwater level and thus increasing the effective stresses over depth could be a possible alternative. Therefore, a case study was carried out to examine these two different types of preloading techniques and their efficacy based on known subsoil conditions. Furthermore, the influence of the possible anisotropy of hydraulic conductivity in the weak soil layer on the preloading process was investigated.

A Comparison of Conventional Blocks and Stabilized Earth Blocks as Building Materials in Uganda

In Uganda, the high cost of conventional cement and sand blocks has driven the widespread adoption of alternative building materials, such as wattle bricks, compressed earth blocks, and burnt bricks. Among these, compressed earth blocks have gained popularity due to their eco-friendly, energy-efficient, and biodegradable nature. Made by compressing damp soil at high pressure, these blocks offer an environmentally sustainable solution by minimizing deforestation and eliminating the need for firewood, which is often used in the production of traditional bricks. This study employed a case study methodology and utilized deliberate sampling to gather data, which was then analyzed using SPSS v20. The findings revealed that Stabilized Earth Materials (SEMs) have a stronger positive correlation with user satisfaction compared to conventional blocks, with a satisfaction rating of 0.651 for SEMs versus 0.602 for conventional blocks. Additionally, the study showed that SEMs had a notable impact on reducing construction costs, with a 4.8% cost difference in favor of SEMs. Based on these results, it is recommended that construction managers should consider increasing the use of stabilized earth materials. This shift could not only lead to significant cost reductions but also improve the overall quality of construction, making it a more sustainable and viable option for Uganda’s building industry.

Earth at risk: An urgent call to end the age of destruction and forge a just and sustainable future.

Human development has ushered in an era of converging crises: climate change, ecological destruction, disease, pollution, and socioeconomic inequality. This review synthesizes the breadth of these interwoven emergencies and underscores the urgent need for comprehensive, integrated action. Propelled by imperialism, extractive capitalism, and a surging population, we are speeding past Earth's material limits, destroying critical ecosystems, and triggering irreversible changes in biophysical systems that underpin the Holocene climatic stability which fostered human civilization. The consequences of these actions are disproportionately borne by vulnerable populations, further entrenching global inequities. Marine and terrestrial biomes face critical tipping points, while escalating challenges to food and water access foreshadow a bleak outlook for global security. Against this backdrop of Earth at risk, we call for a global response centered on urgent decarbonization, fostering reciprocity with nature, and implementing regenerative practices in natural resource management. We call for the elimination of detrimental subsidies, promotion of equitable human development, and transformative financial support for lower income nations. A critical paradigm shift must occur that replaces exploitative, wealth-oriented capitalism with an economic model that prioritizes sustainability, resilience, and justice. We advocate a global cultural shift that elevates kinship with nature and communal well-being, underpinned by the recognition of Earth's finite resources and the interconnectedness of its inhabitants. The imperative is clear: to navigate away from this precipice, we must collectively harness political will, economic resources, and societal values to steer toward a future where human progress does not come at the cost of ecological integrity and social equity.

Assessment of hygrothermal performance of raw earth envelope at overall building scale

Environmental challenges in the building sector have made raw earth a significant ecological alternative. The development of sustainable materials and a clear understanding of their behaviour are essential for sustainable construction. This work aims to respond to this societal issue.This investigation uses a HAM-BES cosimulation methodology that integrates dynamic thermal simulation code (TRNSYS) with a hygrothermal transfer model developed by Luikov and solved by Comsol Multiphysics. The study aims to investigate the energy needs of different building envelopes in several climates where there is raw-earth architecture. A comparison between a cob monolayer envelope and a polystyrene insulated polystyrene insulated brick multilayer envelope has been carried out. This study shows that the raw earth monolayer wall has a higher energy need for oceanic and tropical climate with, respectively, 14 and 19%. A decrease in demand has been found for the desert climate. Moreover, it was shown that the coupling of heat and mass transfers results in a notable reduction in energy demand that can reach 11.5% annually and up to 23% quarterly for tropical climate. These findings highlight the efficiency of raw earth materials and stress the importance of thoroughly understanding and incorporating heat and mass transfer dynamics in the evaluation of sustainability for biobased and earth-based construction materials.

Maximizing fiber content in 3D-printed earth materials: Printability, mechanical, thermal and environmental assessments

Earth building materials are experiencing a new renaissance with novel avenues in advanced manufacturing methods such as 3D printing. However, current mix designs are still limited to little to no fiber reinforcement, which can improve ductility and thermal resistivity of the fabricated building assemblies. This research develops 3D printable earth-fiber composites while maximizing natural fiber content for low-carbon and high-performance materials in additive manufacturing. A range of mix designs are formulated and characterized for their printability, mechanical, thermal, and environmental carbon storage performance. The results of this work present successfully developed novel earthen mixtures with natural fiber content ranging from commonplace “cob” (2%wt fiber) to newly developed “light fiber clay” (up to13%wt fiber content and 49% by total volume), incorporating a range of agrowastes products, including wheat straw, hemp, banana, and kenaf fibers. The performance assessment results showcase meaningful improvement of the fiber-reinforced mix designs as opposed to the earthen counterparts, with up to 125% higher compressive strength and up to 86% lower thermal conductivity. The significance of this work lies in the advancement of sustainable and circular materials and assemblies for future manufacturing of socially equitable built environments.

Principal components analysis and K-means clustering of till geochemical data: Mapping and targeting of prospective areas for lithium exploration in Västernorrland Region, Sweden

To achieve the demand for elements used for the green transition energy, such as lithium, it is necessary to recognize the spatial distribution of the concentrations of these elements in different earth materials such as bedrock and soil and to identify areas with anomalous concentrations of such elements (i.e., mineralization) for further exploration and hopefully exploitation. This study carried out multivariate statistical analyses on compositional (i.e., element concentration) data from till samples to recognize areas that likely contain lithium pegmatite mineralization in the Västernorrland region, central Sweden. We applied principal components analysis (PCA) and K-means clustering techniques to reveal regional-scale patterns in the till geochemical data. We demonstrate that these two methods have potential for recognition of geochemical anomalies related to the underlying bedrock geology as well as to mineralization. The results of PCA- and K-means clustering were validated using known occurrences of lithium mineralization. Two different datasets were compared; one containing all available geochemical data and the second containing only available trace elements in the dataset and it was found that anomalous clusters of samples defined by K-means clustering have anomalous multi-element signatures defined by robust PCA. This demonstrated that principal components are the continuous solutions to the discrete cluster members for the K-means clustering. The results show that both PCA and K-means clustering of till geochemical datasets at the early stages of exploration and target generation may reveal useful information that can be used to identify potential areas for more detailed mapping or exploration activities.

Rare earth-modified yellow carbon dots for long-term imaging in cells and zebrafish

Carbon dot (CDs) materials are typically hindered by aggregation-caused quenching (ACQ) effect. However, there are limitations in terms of their development and application. The introduction of aggregation-induced emission (AIE) characteristics into CDs has emerged as a viable solution to this challenge. In this work, we synthesized a novel yellow fluorescence (FL) rare earth-doped AIE CDs (named Y-CDs), which integrate the benefits of AIE materials, rare earth materials, and CDs. Y-CDs exhibit bright yellow FL, good temperature sensitivity and pH response properties. In cell imaging, Y-CDs showed excellent targeting capability towards the nuclear in HeLa cells. Y-CDs also showed excellent biocompatibility and safety in imaging of zebrafish embryos and zebrafish. Even on the 10th day following culture of zebrafish embryos, the digestive system and lens of zebrafish can be accurately located and imaged. The work presented here suggests the great potential of replacing commercial dyes with Y-CDs for highly specific nuclear labeling and bioimaging.

Thermal properties of a raw earth-flax fibers building material

The aim of this paper is to investigate the thermal behavior of composite building materials comprised of silt and flax fibers, considering various initial conditions. The experiments were conducted on flax fibers alone, examining factors such as moisture content variation, fibers arrangement, and density. Subsequently, the thermal properties of the earth-flax fiber composite were studied, taking into account the influence of water content and fibers mass content. The thermal properties of both flax fibers and raw earth-flax fibers composite specimens were determined using the experimental unsteady-state method. The results indicate that the thermal conductivity and heat capacity of flax fibers increase with density, temperature, and moisture content. Regardless of fibers density and arrangement of fibers, linear relationships have been established for both thermal conductivity and heat capacity as functions of temperature. Additionally, it was demonstrated that the heat capacity and the thermal conductivity increase with water content, regardless of the percentage of added fibers. Moreover, mixing randomly flax fibers with compacted raw earth material has improved the thermal properties of the composite. This improvement pertains to its insulating capacity, ability to store heat, and, subsequently, its contribution to the thermal comfort provided by such earth composite material when used as a building material.

Multisensory supplementary instructional material in earth and space science

This study determined the effect of the developed multisensory supplementary instructional material in enhancing scientific knowledge of grade 9 learners. Moreover, the study assessed significant difference between the pre-and post-assessment scores of the learners who used the instructional material and the significant relationship between the perceived acceptability of the multisensory supplementary instructional material and the students’ level of scientific knowledge. Using descriptive-developmental research, it involved 30 grade 9 students during the school year 2022-2023. A cognitive diagnostic test in terms of remembering, understanding, applying, analyzing, evaluating, and creating was used to identify the least-mastered competency among the topics. Pre-and post-assessment, which measured the scientific knowledge of the students, went through internal and external validation of the panel of examiners and group of teachers. Results revealed a significant difference between the pre-and post-assessment scores of the students as to content and epistemic knowledge whereas there is no significant difference found in the procedural knowledge. It can be inferred that the students enhanced their scientific knowledge after the utilization of the multisensory supplementary instructional material. However, there is no significant relationship obtained between the students’ perception on the acceptability of the material to their level of scientific knowledge.

Numerical Simulation of Sandwiched Perovskite-Based Solar Cell Using Solar Cell Capacitance Simulator (SCAPS-1D)

Due to the superb characteristics of its light-harvesting, the Perovskite sensitizer ABX3 (A = CH3NH3, B = Pb, Sn, and X = Cl, Br, I) has recently attracted great attention. Perovskite is composed of inexpensive and earth abundant materials. It is processable at low temperature preferably via the printing techniques. In addition, the charges in the bulk material after light absorption that enhances low loss in energy charge generation and collection were generated freely. In this research work, Solar cell capacitance simulator (SCAPS-1D) was used to harnessing the real device hybrid Perovskite (PSC) solar cell with material parameters obtained from literatures and experiment used in the definition panel and the arrangement of an hybrid (FTO/ZnO/CZTS/PSCS/CZTS/HTM) model in the SCAPS-1D simulator. From the simulated results obtained the Band gap diagram and other curves were constructed. The efficiency greater than twenty percent (>20%) was achieved, which shows that having a combination of two different absorbers were achievable and calling for great attention from the researchers.

Development and validation of a general-purpose ReaxFF reactive force field for earth material modeling.

ReaxFF reactive force field bridges the gap between nonreactive molecular simulations and quantum mechanical calculations and has been widely applied during the past two decades. However, its application to earth materials, especially those under high T-P conditions relevant to Earth's interior, is still limited due to the lack of available parameters. Here, we present the development and validation of a ReaxFF force field containing several of the most common elements in Earth's crust, i.e., Si/Al/O/H/Na/K. The force field was trained against a large data set obtained from density functional theory (DFT) calculations, including charges, bond/angle distortion curves, equation of states, ion migration energy profiles, and condensation reaction energies. Different coordination environments were considered in the training set. The fitting results showed that the current force field can well reproduce the DFT data (the Pearson correlation coefficient, Rp, is 0.95). We validated the force field on mineral-water interfaces, hydrous melts/supercritical geofluids, and bulk crystals. It was found that the current force field performed excellently in predicting the structural, thermodynamic, and transport properties of various systems (Rp = 0.95). Moreover, possible applications and future development have been discussed. The results obtained in this study suggest that the current force field holds good promise to model a wide range of processes and thus open opportunities to advance the application of ReaxFF in earth material modeling.

RARE EARTH METALS: KEY COMPONENTS OF MODERN TECHNOLOGIES

Purpose. The aim of the article is to conduct a comprehensive analysis of the supply routes for rare earth elements and forecast the development of the market for these elements in the current conditions arising from the war and other factors. Methodology of research. The scientific research methodology was used in the process of writing the article to determine generalised synthetic indicators on strategic ways of development and diversification of rare earth elements supply, as well as statistical and graphical methods to analyse the rare earth elements market and forecast supply and demand using time series. Graphs were used to visualise this data. Findings. It has been found that lithium, cobalt, neodymium and graphite, as well as other elements, are becoming increasingly important in modern technologies and everyday life, which leads to an increase in demand for these rare earth elements. The market for rare earth elements is analysed and demand is forecasted to grow in the future due to the development of green technologies and high-tech devices. The ways of developing and diversifying the supply of rare earth elements are investigated, which made it possible to consider them critical due to possible shortages, supply restrictions and the lack of local concentrations for mining. The global REE market is dominated by Chinese production of REE oxides. That is why, in order to avoid potential risks in the supply of rare earth materials, it is important to consider alternative sources and modern processing technologies to meet demand and ensure further production of rare earth elements. Originality. The article analyses the ways of supplying rare earth elements and their important role in modern technologies. A forecast is made, with an analysis of the market for rare earth materials, which will grow in connection with the transition to a climate-neutral economy. The work is relevant because it is the first to analyse the integrated use of rare earth elements in technologies such as lithium-ion battery technology, fuel cell (FCs) technology and permanent magnet motors. Potential risks in the supply of rare earth materials were determined and ways to avoid them were proposed. Practical value. The practical significance of this research is that in the 20th century, rare earth elements became a key to the production of electronics and other technologies. China, which has significant REE resources, controls a large share of global production, which leads to geopolitical tensions in the supply sector. The results of the study can be used to analyse and forecast the ways of supplying rare earth materials, as well as to solve issues related to future challenges and the development of competition for resources. Key words: rare earth elements (REEs); critical material; lithium-ion battery technology; Fuel cells (FCs) technology; permanent magnet motors; statistical method; forecasting.

Improvement of Mechanical Properties of Compressed Earth Blocks with Stabilising Additives for Self-Build of Sustainable Housing

Earth building technologies are increasingly being used to promote a natural and sustainable construction model and to empower self-building in resource-limited areas. This work focuses on investigating the use of different types of stabilising additives in compressed earth blocks (CEBs). To this end, empirical studies and laboratory analyses of earth samples taken from different sites in Ecuador were combined. Once the most suitable earth for use as a building material was determined, four types of CEBs were produced using equipment designed ad hoc to encourage self-building: earth-based, fibre additives, cementitious additives, and additives of other origin. The panels were characterised by means of compression tests to analyse their mechanical behaviour, obtaining the most promising results for the additivated samples with the highest percentage of cement and for the sample containing ground reeds, with a compressive strength of 3.3 MPa and 0.7 MPa, respectively. These samples were then subjected to more extensive tests using digital image correlation to analyse their full field strains and cracks, where the samples stabilised with cement showed a more homogeneous and consistent behaviour. Finally, an economic and comparative study with conventional construction systems was carried out to demonstrate the feasibility of using the proposed earth materials for cleaner and more economical buildings, mainly due to cost savings and lower pollution in terms of transport when using local resources.

Downward migrating microplastics in lake sediments are a tricky indicator for the onset of the Anthropocene.

Plastics are a recent particulate material in Earth's history. Because of plastics persistence and wide-range presence, it has a great potential of being a global age marker and correlation tool between sedimentary profiles. In this research, we query whether microplastics can be considered among the array of proxies to delimit the Anthropocene Epoch (starting from the year 1950 and above). We present a study of microplastics deposition history inferred from sediment profiles of lakes in northeastern Europe. The sediments were dated with independent proxies from the present back to the first half of the 18th century. Regardless of the sediment layer age, microplastic particles were found throughout the cores in all sites. Depending on particles' aspect ratio, less elongated particles were found deeper, while more elongated particles and fibers have reduced mobility. We conclude that interpretation of microplastics distribution in the studied sediment profiles is ambiguous and does not strictly indicate the beginning of the Anthropocene Epoch.

Towards Production of Cost-Effective Modification of SmCo5-Type Alloys Suitable for Permanent Magnets.

SmCo5 constitutes one of the strongest classes of permanent magnets, which exhibit magnetocrystalline anisotropy with uniaxial character and enormous energy and possess high Curie temperature. However, the performance of SmCo5 permanent magnets is hindered by a limited energy product and relatively high supply risk. Sm is a moderately expensive element within the lanthanide group, while Co is a more expensive material than Fe, making SmCo5-based permanent magnets among the most expensive materials in the group. Subsequently, the need for new materials with less content in critical and thus expensive resources is obvious. A promising path of producing new compounds that meet these requirements is the chemical modification of established materials used in PM towards the reduction of expensive resources, for example, reducing Co content with transition metals (like Fe, Ni) or using as substitutes raw rare earth materials with greater abundance than global demand, like Ce and La. Important instruments to achieve these goals are theoretical calculations, such as ab initio methods and especially DFT-based calculations, in predicting possible stable RE-TM intermetallic compounds and their magnetic properties. This review aims to present the progress of recent years in the production of improved SmCo5-type magnets.