Dynamical Backaction Research Articles

Photon-pressure strong coupling between two superconducting circuits

The nonlinear, parametric coupling between two harmonic oscillators has been used in the field of optomechanics for breakthrough experiments regarding the control and detection of mechanical resonators. Although this type of interaction is an extremely versatile resource and not limited to coupling light fields to mechanical resonators, there have only been, very few reports of implementing it within other systems so far. Here, we present a device consisting of two superconducting LC circuits, parametrically coupled to each other by a magnetic flux-tunable photon-pressure interaction. We observe dynamical backaction between the two circuits, photon-pressure-induced transparency and absorption, and enter the parametric strong-coupling regime, enabling switchable and controllable coherent state transfer between the two modes. As result of the parametric interaction, we are also able to amplify and observe thermal current fluctuations in a radio-frequency LC circuit close to its quantum ground-state. Due to the high design flexibility and precision of superconducting circuits and the large single-photon coupling rate, our approach will enable new ways to control and detect radio-frequency photons and allow for experiments in parameter regimes not accessible to other platforms with photon-pressure interaction.

Spin-cooling of the motion of a trapped diamond.

Observing and controlling macroscopic quantum systems has long been a driving force in quantum physics research. In particular, strong coupling between individual quantum systems and mechanical oscillators is being actively studied1-3. Whereas both read-out of mechanical motion using coherent control of spin systems4-9 and single-spin read-out using pristine oscillators have been demonstrated10,11, temperature control of the motion of a macroscopic object using long-lived electronic spins has not been reported. Here we observe a spin-dependent torque and spin-cooling of the motion of a trapped microdiamond. Using a combination of microwave and laser excitation enables the spins of nitrogen-vacancy centres to act on the diamond orientation and to cool the diamond libration via a dynamical back-action. Furthermore, by driving the system in the nonlinear regime, we demonstrate bistability and self-sustained coherent oscillations stimulated by spin-mechanical coupling, which offers the prospect of spin-driven generation of non-classical states of motion. Such a levitating diamond-held in position by electric field gradients undervacuum-can operate as a 'compass' with controlled dissipation and has potential use in high-precision torque sensing12-14, emulation of the spin-boson problem15 and probing of quantum phase transitions16. In the single-spin limit17 and using ultrapure nanoscale diamonds, it could allow quantum non-demolition read-out of the spin of nitrogen-vacancy centres at ambient conditions, deterministic entanglement between distant individual spins18 and matter-wave interferometry16,19,20.

Optomechanical Microwave Amplification without Mechanical Amplification

High-gain and low-noise signal amplification is a valuable tool in various cryogenic microwave experiments. A microwave optomechanical device, in which a vibrating capacitor modulates the frequency of a microwave cavity, is one technique that is able to amplify microwave signals with high gain and large dynamical range. Such optomechanical amplifiers typically rely on strong backaction of microwave photons on the mechanical mode achieved in the sideband-resolved limit of optomechanics. Here, we observe microwave amplification in an optomechanical cavity in the extremely unresolved sideband limit. A large gain is observed for any detuning of the single pump tone within the cavity linewidth, a clear indication that the amplification is not induced by dynamical backaction. By being able to amplify for any detuning of the pump signal, the amplification center frequency can be tuned over the entire range of the broad cavity linewidth. Additionally, by providing microwave amplification without mechanical amplification, we predict that using this scheme it is possible to achieve near-quantum-limited microwave amplification despite a large thermal occupation of the mechanical mode.

Brillouin cavity optomechanics sensing with enhanced dynamical backaction

Based on the dispersive interaction between a high quality factor microcavity and nano-objects, whispering-gallery-mode microcavities have been widely used in highly sensitive sensing. Here, we propose a novel method to enhance the sensitivity of the optical frequency shift and reduce the impact of the laser frequency noise on the detection resolution through Brillouin cavity optomechanics in a parity-time symmetric system. The optical spring effect is sensitive to the perturbation of optical modes around the exceptional point. By monitoring the shift of the mechanical frequency, the detection sensitivity for the optical frequency shift is enhanced by 2 orders of magnitude compared with conventional approaches. We find the optical spring effect is robust to the laser frequency noise around the exceptional point, which can reduce the detection limitation caused by the laser frequency instability. Thus, our method can improve the sensing ability for nano-object sensing and other techniques based on the frequency shift of the optical mode.

Green's-function formulation for studying the backaction cooling of a levitated nanosphere in an arbitrary structure

In this paper, we present a formulation based on the Green's function to study the backaction cooling of a levitated nanosphere in an arbitrary structure. This formulation has enabled us to study the dynamical backaction effect and the possibility of cooling in the absence of a cavity or when the nanosphere is trapped outside a cavity and excites a continuum of electromagnetic modes. We also investigate the roles of the Stokes and anti-Stokes processes, separately, and show that the anti-Stokes process is not necessarily the sole cooling agent. This is in sheer contrast with the intracavity cooling scenario.

Quantum-Limited Measurements Using an Optical Cavity with Modulated Intrinsic Loss.

We analyze a cavity optomechanical setup, in which the position of an oscillator modulates the internal optical loss. We show that, in contrast to systems with a fixed internal loss, in such a setup, quantum-limited position measurements can be performed and formulate conditions under which it is possible. Additionally, under these conditions the setup exhibits a number of potential benefits for practical operation, including the complete absence of dynamical backaction and optomechanical instability, rejection of classical laser noise, and thermal fluctuations of cavity frequency from the measurement record. We address a few potential experimental implementations of this setup.

Dueling dynamical backaction in a cryogenic optomechanical cavity

Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optomechanical spring effect and the latter governing the optomechanical damping. At high enough optical input powers, we show that the photothermal force drives the mechanical resonator into self-oscillations for a pump beam detuned to the lower-frequency side of the optical resonance, contrary to what one would expect for a radiation-pressure-dominated optomechanical device. Using a fully nonlinear model, we fit the hysteretic response of the optomechanical cavity to extract its properties, demonstrating that this non-sideband-resolved device exists in a regime where photothermal damping could be used to cool its motion to the quantum ground state.

Optomechanical Cooling in a Continuous System

Radiation-pressure-induced optomechanical coupling permits exquisite control of micro- and mesoscopic mechanical oscillators. This ability to manipulate and even damp mechanical motion with light---a process known as dynamical backaction cooling---has become the basis for a range of novel phenomena within the burgeoning field of cavity optomechanics, spanning from dissipation engineering to quantum state preparation. As this field moves toward more complex systems and dynamics, there has been growing interest in the prospect of cooling traveling-wave phonons in continuous optomechanical waveguides. Here, we demonstrate optomechanical cooling in a continuous system for the first time. By leveraging the dispersive symmetry breaking produced by inter-modal Brillouin scattering, we achieve continuous mode optomechanical cooling in an extended 2.3-cm silicon waveguide, reducing the temperature of a band of traveling-wave phonons by more than 30 K from room temperature. This work reveals that optomechanical cooling is possible in macroscopic linear waveguide systems without an optical cavity or discrete acoustic modes. Moreover, through an intriguing type of wavevector-resolved phonon spectroscopy, we show that this system permits optomechanical control over continuously accessible groups of phonons and produces a new form of nonreciprocal reservoir engineering. Beyond this study, this work represents a first step towards a range of novel classical and quantum traveling-wave operations in continuous optomechanical systems.

Strong thermomechanical squeezing in a far-detuned membrane-in-the-middle system

We demonstrate 8.5 dB thermal squeezing of a membrane oscillator using the dynamical backaction effect and electrostatic feedback in an optomechanical membrane-in-the-middle setup. We show that strong squeezing can be obtained even in the far detuning regime of a sideband-resolved system. By using the dielectrophoretic force of a metallic needle kept in close proximity to the membrane, we implement the one-quadrature active feedback scheme to prevent the divergence of the amplified quadrature and surpass the 3 dB limit of mechanical squeezing. We also discuss different regions of the sideband spectrum where strong squeezing can be obtained. Although the demonstration here is classical, this technique is equally applicable to prepare the mechanical oscillator in a quantum squeezed state.

Optoelectronic forces with quantum wells for cavity optomechanics in GaAs/AlAs semiconductor microcavities

Radiation pressure, electrostriction, and photothermal forces have been investigated to evidence backaction, non-linearities and quantum phenomena in cavity optomechanics. We show here through a detailed study of the relative intensity of the cavity mechanical modes observed when exciting with pulsed lasers close to the GaAs optical gap that optoelectronic forces involving real carrier excitation and deformation potential interaction are the strongest mechanism of light-to-sound transduction in semiconductor GaAs/AlAs distributed Bragg reflector optomechanical resonators. We demonstrate that the ultrafast spatial redistribution of the photoexcited carriers in microcavities with massive GaAs spacers leads to an enhanced coupling to the fundamental 20 GHz vertically polarized mechanical breathing mode. The carrier diffusion along the growth axis of the device can be enhanced by increasing the laser power, or limited by embedding GaAs quantum wells in the cavity spacer, a strategy used here to prove and engineer the optoelectronic forces in phonon generation with real carriers. The wavelength dependence of the observed phenomena provide further proof of the role of optoelectronic forces. The optical forces associated to the different intervening mechanisms and their relevance for dynamical backaction in optomechanics are evaluated using finite-element methods. The results presented open the path to the study of hitherto seldom investigated dynamical backaction in optomechanical solid-state resonators in the presence of optoelectronic forces.

Interaction-modulated tunneling dynamics in a mixture of Bose–Einstein condensates

We study the interaction-modulated tunneling dynamics of a Bose-Einstein condensate (BEC) in a deep double-well potential, where the tunneling between the two wells is modulated by another BEC trapped in a harmonic potential symmetrically positioned at the center of the double-well potential. The inter-species interactions couple the dynamics of the two BECs, which give rise to interesting features in the tunneling oscillations. Adopting a two-mode approximation for the BEC in the double-well potential and coupling it with the Gross-Pitaevskii equation of the harmonically trapped BEC, we numerically investigate the coupled dynamics of the BEC mixture, and map out the phase diagram of the tunneling dynamics. We show that the dynamical back action of the BEC in the harmonic trap leads to strong non-linearity in the oscillations of the BEC in the double-well potential, which enriches the system dynamics, and enhances macroscopic self trapping. The transition between the Josephson oscillation and the self-trapping dynamics can be identified by monitoring the oscillation frequency of the double-well BEC. Our results suggest the possibility of tuning the tunneling dynamics of BECs in double-well potentials.

Engineering the optical spring via intra-cavity optical-parametric amplification

The ‘optical spring’ results from dynamical back-action and can be used to improve the sensitivity of cavity-enhanced gravitational-wave detectors. The effect occurs if an oscillation of the cavity length results in an oscillation of the intra-cavity light power having such a phase relation that the light's radiation pressure force amplifies the oscillation of the cavity length. Here, we analyse a Michelson interferometer whose optical-spring cavity includes an additional optical-parametric amplifier with adjustable phase. We find that the phase of the parametric pump field is a versatile parameter for shaping the interferometer's spectral density.

A maser based on dynamical backaction on microwave light

The work of Braginsky introduced radiation pressure dynamical backaction, in which a mechanical oscillator that is parametrically coupled to an electromagnetic mode can experience a change in its rigidity and it's damping rate. The finite cavity electromagnetic decay rate can lead to either amplification or cooling of the mechanical oscillator, and lead in particular to a parametric oscillatory instability, associated with regenerative oscillations of the mechanical oscillator, an effect limiting the circulating power in laser gravitational wave interferometers. These effects implicitly rely on an electromagnetic cavity whose dissipation rate vastly exceeds that of the mechanical oscillator, a condition naturally satisfied in most optomechanical systems. Here we consider the opposite limit, where the mechanical dissipation is engineered to dominate over the electromagnetic one, essentially reversing role of electromagnetic and mechanical degree of freedom. As a result, the electromagnetic field is now subject to dynamical backaction: the mechanical oscillator provides a feedback mechanism which modifies the damping rate of the electromagnetic cavity. We describe this phenomenon in the spirit of Braginsky's original description, invoking finite cavity delay and highlighting the role of dissipation. Building on previous experimental work, we demonstrate this dynamical backaction on light in a superconducting microwave optomechanical circuit. In particular, we drive the system above the parametric instability threshold of the microwave mode, leading to maser action and demonstrate injection locking of the maser, which stabilizes its frequency and reduces its noise.

A dissipative quantum reservoir for microwave light using a mechanical oscillator

Isolation of a system from its environment is often desirable, from precision measurements to control of individual quantum systems; however, dissipation can also be a useful resource. Remarkably, engineered dissipation enables the preparation of quantum states of atoms, ions or superconducting qubits as well as their stabilization. This is achieved by a suitably engineered coupling to a dissipative cold reservoir formed by electromagnetic modes. Similarly, in the field of cavity electro- and optomechanics, the control over mechanical oscillators utilizes the inherently cold, dissipative nature of the electromagnetic degree of freedom. Breaking from this paradigm, recent theoretical work has considered the opposite regime in which the dissipation of the mechanical oscillator dominates and provides a cold, dissipative reservoir to an electromagnetic mode. Here we realize this reversed dissipation regime in a microwave cavity optomechanical system and realize a quasi-instantaneous, cold reservoir for microwave light. Coupling to this reservoir enables to manipulate the susceptibility of the microwave cavity, corresponding to dynamical backaction control of the microwave field. Additionally, we observe the onset of parametric instability, i.e. the stimulated emission of microwaves (masing). Equally important, the reservoir can function as a useful quantum resource. We evidence this by employing the engineered cold reservoir to implement a large gain (above 40 dB) phase preserving microwave amplifier that operates 0.87 quanta above the limit of added noise imposed by quantum mechanics. Such a dissipative cold reservoir forms the basis of microwave entanglement schemes, the study of dissipative quantum phase transitions, amplifiers with unlimited gain-bandwidth product and non-reciprocal devices, thereby extending the available toolbox of quantum-limited microwave manipulation techniques.

Correlated anomalous phase diffusion of coupled phononic modes in a sideband-driven resonator.

The dynamical backaction from a periodically driven optical cavity can reduce the damping of a mechanical resonator, leading to parametric instability accompanied by self-sustained oscillations. Here we study experimentally and theoretically new aspects of the backaction and the discrete time-translation symmetry of a driven system using a micromechanical resonator with two nonlinearly coupled vibrational modes with strongly differing frequencies and decay rates. We find self-sustained oscillations in both the low- and high-frequency modes. Their frequencies and amplitudes are determined by the nonlinearity, which also leads to bistability and hysteresis. The phase fluctuations of the two modes show near-perfect anti-correlation, a consequence of the discrete time-translation symmetry. Concurrently, the phase of each mode undergoes anomalous diffusion. The phase variance follows a power law time dependence, with an exponent determined by the 1/f-type resonator frequency noise. Our findings enable compensating for the fluctuations using a feedback scheme to achieve stable frequency downconversion.

Self-sustained coherent phonon generation in optomechanical cavities

Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing.

Generalized analysis of quantum noise and dynamic backaction in signal-recycled Michelson-type laser interferometers

We analyze the radiation pressure induced interaction of mirror motion and light fields in Michelson-type interferometers used for the detection of gravitational waves and for fundamental research in table-top quantum optomechanical experiments, focusing on the asymmetric regime with a (slightly) unbalanced beamsplitter and a (small) offset from the dark port. This regime, as it was shown recently, provides new interesting features, in particular a stable optical spring and optical cooling on cavity resonance. We show that generally the nature of optomechanical coupling in Michelson-type interferometers does not fit into the standard dispersive/dissipative dichotomy. In particular, a symmetric Michelson interferometer with signal-recycling but without power-recycling cavity is characterized by a purely dissipative optomechanical coupling; only in the presence of asymmetry, additional dispersive coupling arises. In gravitational waves detectors possessing signal- and power-recycling cavities, yet another, "coherent" type of optomechanical coupling takes place. We develop here a generalized framework for the analysis of asymmetric Michelson-type interferometers which also covers the possibility of the injection of carrier light into both ports of the interferometer. Using this framework, we analyze in depth the "anomalous" features of the Michelson-Sagnac interferometer which where discussed and observed experimentally in previous works [1-3].

Molecular cavity optomechanics as a theory of plasmon-enhanced Raman scattering

The exceptional enhancement of Raman scattering by localized plasmonic resonances in the near field of metallic nanoparticles, surfaces or tips (SERS, TERS) has enabled spectroscopic fingerprinting down to the single molecule level. The conventional explanation attributes the enhancement to the subwavelength confinement of the electromagnetic field near nanoantennas. Here, we introduce a new model that also accounts for the dynamical nature of the plasmon-molecule interaction. We thereby reveal an enhancement mechanism not considered before: dynamical backaction amplification of molecular vibrations. We first map the system onto the canonical Hamiltonian of cavity optomechanics, in which the molecular vibration and the plasmon are parametrically coupled. We express the vacuum optomechanical coupling rate for individual molecules in plasmonic 'hot-spots' in terms of the vibrational mode's Raman activity and find it to be orders of magnitude larger than for microfabricated optomechanical systems. Remarkably, the frequency of commonly studied molecular vibrations can be comparable to or larger than the plasmon's decay rate. Together, these considerations predict that an excitation laser blue-detuned from the plasmon resonance can parametrically amplify the molecular vibration, leading to a nonlinear enhancement of Raman emission that is not predicted by the conventional theory. Our optomechanical approach recovers known results, provides a quantitative framework for the calculation of cross-sections, and enables the design of novel systems that leverage dynamical backaction to achieve additional, mode-selective enhancements. It also provides a quantum mechanical framework to analyse plasmon-vibrational interactions in terms of molecular quantum optomechanics.

Net on-chip Brillouin gain based on suspended silicon nanowires

The century-old study of photon–phonon coupling has seen a remarkable revival in the past decade. Driven by early observations of dynamical back-action, the field progressed to ground-state cooling and the counting of individual phonons. A recent branch investigates the potential of traveling-wave, optically broadband photon–phonon interaction in silicon circuits. Here, we report continuous-wave Brillouin gain exceeding the optical losses in a series of suspended silicon beams, a step towards selective on-chip amplifiers. We obtain efficiencies up to the highest to date in the phononic gigahertz range. We also find indications that geometric disorder poses a significant challenge towards nanoscale phonon-based technologies.

Dynamical backaction cooling with free electrons.

The ability to cool single ions, atomic ensembles, and more recently macroscopic degrees of freedom down to the quantum ground state has generated considerable progress and perspectives in fundamental and technological science. These major advances have been essentially obtained by coupling mechanical motion to a resonant electromagnetic degree of freedom in what is generally known as laser cooling. Here, we experimentally demonstrate the first self-induced coherent cooling mechanism that is not mediated by an electromagnetic resonance. Using a focused electron beam, we report a 50-fold reduction of the motional temperature of a nanowire. Our result primarily relies on the sub-nanometre confinement of the electron beam and generalizes to any delayed and spatially confined interaction, with important consequences for near-field microscopy and fundamental nanoscale dissipation mechanisms.