Double-skin composite (DSC) panels can offer high strength and robustness while improving the convenience of construction, with great potential for application in high rise buildings and nuclear power plants. In DSC panels, the stability of the outer surface steel plates are governed by the constraints of the in-fill concrete and the discrete shear connectors, i.e., the ratio of connector spacing (B) and surface steel plate thickness (t). In this paper, tests were performed on 10 specimens to assess the buckling behavior of DSC panels. The arrangement of the shear studs and the B/t ratio were varied in the tests. The results show that the arrangement and spacing of the shear studs can considerably influence the buckling shapes and loading capacity of the steel plates. Three-dimensional finite element (FE) models were developed to simulate the behavior of DSC panels subject to compression, and the FE results were found to be in good agreement with the observed buckling behavior during tests. A theoretical model based on Euler's equation was also proposed to predict the buckling stress of steel plates, and it showed reasonable agreement with the experimental measurements and FE results. The formula proposed in this paper can be used for determining the number or spacing of shear studs in DSC walls.
Read full abstract