Dose Control Research Articles

Far-Ultraviolet C Disinfection Reduces Oxidative Damage to the Cornea Compared to Povidone-Iodine Disinfection

Far-ultraviolet C (far-UVC) light shows promise for pathogen control but its safety and efficacy for corneal disinfection remain unclear. In this study, safe far-UVC dosages were investigated for corneal disinfection and its germicidal performance and oxidative damage potential to 5% povidone-iodine (PVP-I) were compared. Rat corneas were exposed to varying 222 nm far-UVC doses (3–60 mJ/cm2) and assessed for ocular damage, apoptosis, and oxidative stress to determine the safe dose of far-UVC. Far-UVC at 30 mJ/cm2 induced corneal apoptosis and oxidative damage, but 15 mJ/cm2 caused no apoptosis or oxidative damage. At this optimized dose (9 mJ/cm2), far-UVC achieved 90.5% sterilization, exceeding 5% PVP-I (80.8%), with significantly less oxidative damage and cell death in the cornea. In conclusion, our study demonstrates that the use of 5% povidone-iodine (PVP-I) for disinfection results in significant oxidative damage to the corneal tissue. However, a safe dosage of far-UVC light exhibited a promising disinfection effect without causing oxidative damage to the corneal tissue. Far-UVC offers a promising alternative for corneal disinfection but requires careful dosage control (≤30 mJ/cm2) to avoid ocular surface harm.

Tunable, self-contained gene dosage control via proteolytic cleavage of CRISPR-Cas systems.

Gene therapy holds great therapeutic potential. Yet, controlling cargo expression in single cells is limited due to the variability of delivery methods. We implement an incoherent feedforward loop based on proteolytic cleavage of CRISPR-Cas activation or inhibition systems to reduce gene expression variability against the variability of vector delivery. We demonstrate dosage control for activation and inhibition, post-delivery tuning, and RNA-based delivery, for a genome-integrated marker. We then target the RAI1 gene, the haploinsufficiency and triplosensitivity of which cause two autism-related syndromes, Smith-Magenis-Syndrome (SMS) and Potocki-Lupski-Syndrome, respectively. We demonstrate dosage control for RAI1 activation in HEK293s, Neuro-2As, and mouse cortical neurons via AAVs and lentiviruses. Finally, we activate the intact RAI1 copy in SMS patient-derived cells to an estimated two-copy healthy range, avoiding the harmful three-copy regime. Our circuit paves the way for viable therapy in dosage-sensitive disorders, creating precise and tunable gene regulation systems for basic and translational research.

Co-MOF-derived N-doped carbon nanosheet arrays on biomass carbon fiber membrane for highly sensitive detection of luteolin

Rapid and accurate determination of luteolin (LU) content is important for drug dosage control, treatment and prevention of disease. Traditional chromatographic and spectroscopic methods are gradually replaced by more sensitive and rapid electrochemical detection. 3D carbonized eggshell fiber membrane (3D CEFM) with good electrical conductivity and mechanical stability is prepared at high temperatures. To enhance the sensing performance of LU, nitrogen-doped carbon nanosheet arrays/3D CEFM (Co-NC NSAs/3D CEFM) derived from ZIF-67 nanosheet arrays (ZIF-67 NSAs) are prepared on the surface of 3D CEFM. Due to the synergistic effect, the Co-NC NSAs (thickness ∼ 1 μm, height ∼ 3 μm) provides a shorter electron transport path, while the 3D CEFM (pore size ∼5 μm) offers good electrical conductivity and a large solution contact area. Co-NC NSAs/3D CEFM electrode has a sensitivity of 1.31 μA·μM−1·cm−2 in the 0–60 μM LU and a limit of detection (LOD) of 0.04 μM (S/N = 3). Meanwhile, the electrode demonstrated recoveries of 98.0 % to 103.5 % in real samples, with a relative standard deviation (RSD) of 1.2 to 2.3 %. These results indicate that the electrode has significant potential for practical applications.

Implementing Optogenetic-Controlled Bacterial Systems in Drosophila melanogaster for Alleviation of Heavy Metal Poisoning.

Drosophila melanogaster (fruit fly) is an animal model chassis in biological and genetic research owing to its short life cycle, ease of cultivation, and acceptability to genetic modification. While the D. melanogaster chassis offers valuable insights into drug efficacy, toxicity, and mechanisms, several obvious challenges such as dosage control and drug resistance still limit its utility in pharmacological studies. Our research combines optogenetic control with engineered gut bacteria to facilitate the precise delivery of therapeutic substances in D. melanogaster for biomedical research. We have shown that the engineered bacteria can be orally administered to D. melanogaster to get a stable density of approximately 28,000 CFUs/per fly, leading to no detectable negative effects on the growth of D. melanogaster. In a model of D. melanogaster exposure to heavy metal, these orally administered bacteria uniformly express target genes under green light control to produce MtnB protein for binding and detoxifying lead, which significantly reduces the level of oxidative stress in the intestinal tract of Pb-treated flies. This pioneering study lays the groundwork for using optogenetic-controlled bacteria in the model chassis D. melanogaster to advance biomedical applications.

Lidocaine-Loaded Iontophoresis-Driven Fiber-Based Microneedle Patch for Controllable and Long-Lasting Transdermal Local Analgesia

AbstractThe acute pain induced by clinical procedures, such as venipuncture, dental operations, and dermatological treatments, as well as postoperative pain, drives the advancement of anesthetic techniques aimed at alleviating discomfort. This situation underscores the ongoing significance of effective pain management strategies within the field of anesthesia. This paper presents an integrated iontophoresis (ITP)-driven fiber-based microneedle patch (IFMP) regulated by a smartphone for controllable, long-lasting lidocaine transdermal delivery. The IFMP integrates pure cotton fiber canvas-based dissolving microneedles (MNs) with ITP into a patch, with the MNs tips and gel layers significantly increasing the drug-loading capacity, achieving a one-step drug administration strategy of “dissolution, diffusion, and ITP.” Lidocaine is released via the microchannels of MNs by passive diffusion. Additionally, an electric current initiates active ITP for lidocaine delivery, creating synergy. User-requirement-based drug release by precisely modulating electrical signals in rat pain models is described herein. A smartphone application enables precise dosage control. It offers three different delivery modes: single-dose, pulse delivery, and sustained-release, ensuring rapid onset, and long-lasting pain relief. This versatility makes the system suitable for various pain conditions. The IFMP represents a promising system for patient-controlled local analgesia treatment, enabling active and long-term local self-controlled pain management in a safe and regulated manner. Graphical Abstract The iontophoresis-driven fiber-based microneedle patch combines fiber-based dissolving microneedles with iontophoresis, facilitating controlled lidocaine release through diffusion and electrical activation for enhanced effect. Precise modulation of electrical signals allows user-requirement-based drug release in rat pain models. A smart application supports precise dosing in single-dose, pulse, or sustained-release modes, ensuring efficient and prolonged pain management.

Efficient partial denitrification-anammox process enabled by a novel denitrifier with truncated nitrite reduction pathway

Partial denitrification coupled with anaerobic ammonium oxidation (PD-anammox) is a promising technology for cost-effective nitrogen removal from wastewater. Nitrite availability is crucial to anammox performance but often limited by the slow partial denitrification process. Here we report an efficient PD-anammox system driven by the novel denitrifier Bacillus velezensis C1–3 with truncated nitrite reduction pathway. Whole-genome sequencing analysis revealed that the lack of nitrite reductase genes nirS/nirK and norBC in strain C1–3 enabled nitrite accumulation without the need for precise control of carbon dosage. By coupling it with anammox sludge, over 79 % total nitrogen (TN) removal was stably achieved, under a TN loading rate of 660 mg/L/d and a carbon/nitrogen ratio below 1.0. Mechanism explorations indicate that the niche differentiation of C1–3 and anammox bacteria facilitated their mutualism while avoiding nitrite competition. This study demonstrates a novel strategy for establishing efficient PD-anammox process by harnessing the unique metabolic deficiency of denitrifiers, shedding light on the development of stable and sustainable biological nitrogen removal technologies with minimal carbon footprint.

The Impact of Polychlorinated Biphenyls on the Development of Zebrafish (Danio rerio).

Polychlorinated biphenyls (PCBs) are a group of 209 highly stable molecules that were used extensively in industry. Although their commercial use ceased in 1979, they are still present in many aquatic ecosystems due to improper disposal, oceanic currents, atmospheric deposition, and hydrophobic nature. PCBs pose a significant and ongoing threat to the development and sustainability of aquatic organisms. In areas with PCB exposure high mortality rates of organisms inhabiting them are still seen today, posing a significant threat to local species. Zebrafish were exposed to a standard PCB mixture (Aroclor 1254) for the first 5 days post fertilization, as there is a gap in knowledge during this important developmental period for fish (i.e., organization of the body). This PCB mixture was formally available commercially and has a high prevalence in PCB-contaminated sites. We tested for the effects of PCB dosage (control (embryo water only; 0 mg/L), methanol (solvent control; 0 mg/L); PCB 1 (0.125 mg/L), PCB 2 (0.25 mg/L), PCB 3 (0.35 mg/L), and PCB 4 (0.40 mg/L)) on zebrafish survival, rate of metamorphosis, feeding efficiency, and growth. We found significant, dose-dependent effects of PCB exposure on mortality, feeding efficiency, and growth, but no clear effect of PCBs on the rate of zebrafish metamorphosis. We identified a concentration in which there were no observable effects (NOEC), PCB concentration above the NOEC had a significant impact on life-critical processes. This can further inform local management decisions in environments experiencing PCB contamination.

Investigation of Dual-Loaded Doxorubicin and Sorafenib Liposomes Co-Modified with Glycyrrhetinic Acid and Cell-Penetrating Peptide TAT.

Combining Doxorubicin (DOX) with sorafenib (SF) is a promising strategy for treating Hepatocellular Carcinoma (HCC). However, strict dosage control is required for both drugs, and there is a lack of target selectivity. This study aims to develop a novel nano-drug delivery system for the combined use of DOX and SF, aiming to reduce their respective dosages, enhance therapeutic efficacy, and improve target selectivity. DOX/SF co-loaded liposomes (LPs) were prepared using the thin-film hydration method. The liposomes were modified with 1,2-distearoyl-sn-glycero-3-phospho-ethanolamine (DSPE)- polyethylene glycol (PEG2000), DSPE-PEG1000-cell penetrating peptide TAT, and Glycyrrhetinic Acid (GA). The basic properties of the liposomes were characterized. CCK-8 cell viability assays were conducted using HepG2, MHCC97-H, and PLC cell models, and apoptosis experiments were performed using HepG2 cells to determine if this delivery system could reduce the respective dosages of DOX and SF and enhance HCC cytotoxicity. Liposome uptake experiments were performed using HepG2 cells to validate the target selectivity of this delivery system. A GA/TAT-DOX/SF-LP liposomal nano drug delivery system was successfully constructed, with a particle size of 150 nm, a zeta potential of -7.9 mV, a DOX encapsulation efficiency of 92%, and an SF encapsulation efficiency of 88.7%. Cellular experiments demonstrated that this delivery system reduced the required dosages of DOX and SF, exhibited stronger cytotoxicity against liver cancer cells, and showed better target selectivity. A simple and referenceable liposomal nano drug delivery system has been developed for the combined application of DOX and SF in hepatocellular carcinoma treatment.

Imprinting as Basis for Complex Evolutionary Novelties in Eutherians.

The epigenetic phenomenon of genomic imprinting is puzzling. While epigenetic modifications in general are widely known in most species, genomic imprinting in the animal kingdom is restricted to autosomes of therian mammals, mainly eutherians, and to a lesser extent in marsupials. Imprinting causes monoallelic gene expression. It represents functional haploidy of certain alleles while bearing the evolutionary cost of diploidization, which is the need of a complex cellular architecture and the danger of producing aneuploid cells by mitotic and meiotic errors. The parent-of-origin gene expression has stressed many theories. Most prominent theories, such as the kinship (parental conflict) hypothesis for maternally versus paternally derived alleles, explain only partial aspects of imprinting. The implementation of single-cell transcriptome analyses and epigenetic research allowed detailed study of monoallelic expression in a spatial and temporal manner and demonstrated a broader but much more complex and differentiated picture of imprinting. In this review, we summarize all these aspects but argue that imprinting is a functional haploidy that not only allows a better gene dosage control of critical genes but also increased cellular diversity and plasticity. Furthermore, we propose that only the occurrence of allele-specific gene regulation mechanisms allows the appearance of evolutionary novelties such as the placenta and the evolutionary expansion of the eutherian brain.

Optimized sizing of a pumping system using the Scilab software

Climate change represents, today, one of the greatest challenges regarding the availability of water resources for the cultivation of food and raw materials of plant origin that the world's population so badly needs. Sugarcane, due to its high added value to produce several products and whose accumulation of sucrose is mainly due to a perfect dosage of water, brought to light the need to obtain new irrigation strategies, thus aiming at a more sustainable, efficient and economical management of water consumption in this sector. As an alternative to this challenge, drip irrigation stood out, which allowed not only a more precise control of water dosage, but also essential nutrients for the development of sugarcane. Taking advantage of this, a sugar and alcohol plant in the interior of the state of São Paulo, whose identity will be preserved, made several investments to implement this system on its farms and one of these projects will be discussed in detail about the dimensioning of the entire piping network. which involves the pumping system, from water collection to discharge into a storage tank, responsible for supplying the dripping, using a pre-dimensioned pump and respecting the specifications defined by the client for this work. In addition, the free software Scilab was used to implement the piping and pumping sizing procedure, as an extra tool, in addition to development in Excel.

Supramolecular Nano-Tracker for Real-Time Tracking of Drug Release and Efficient Combination Therapy.

Real-time tracking of drug release from nanomedicine in vivo is crucial for optimizing its therapeutic efficacy in clinical settings, particularly in dosage control and determining the optimal therapeutic window. However, most current real-time tracking systems require a tedious synthesis and purification process. Herein, a supramolecular nano-tracker (SNT) capable of real-time tracking of drug release in vivo based on non-covalent host-guest interactions is presented. By integrating multiple cavities into a single nanoparticle, SNT achieves co-loading of drugs and probes while efficiently quenching the photophysical properties of the probe through host-guest complexation. Moreover, SNT is readily degraded under hypoxic tumor tissues, leading to the simultaneous release of drugs and probes and the fluorescence recovery of probes. With this spatial and temporal consistency in drug loading and fluorescence quenching, as well as drug release and fluorescence recovery, SNT successfully achieves real-time tracking of drug release in vivo (Pearson r = 0.9166, R2 = 0.8247). Furthermore, the released drugs can synergize effectively with fluorescent probes upon light irradiation, achieving potent chemo-photodynamic combination therapy in 4T1-bearing mice with a significantly improved survival rate (33%), providing a potential platform to significantly advance the development of nanomedicine and achieve optimal therapeutic effects in the clinic.

Assessment of sulfuric acid as pH control agent in catalytic nitrate reduction in drinking waters

H2SO4 was thoroughly assessed as an alternative to CO2 as pH controller, as it allows for to a much precise dosage control. Catalytic nitrate reduction tests using a Pd-Cu catalyst supported on a carbon black were performed using both Milli-Q grade and real natural drinking waters spiked with NO3– in batch reactors. Conversion and selectivity results were equivalent to those obtained for CO2 use, obtaining total NO3– conversion and final NH4+ selectivity around 30 % for a pH range of 5.5–6 using a 0.05 M H2SO4 solution. Good stability of the catalyst in natural drinking water with the higher salt content studied was observed through reaction cycles, despite the presence of SO42- in the reaction medium, with total NO3– conversion after four reaction cycles and final NH4+ concentration of less than 16 mg/L were obtained, making H2SO4 a promising alternative to CO2 as pH controller in the catalytic NO3– reduction.

Self-Assembly of Polymers and Their Applications in the Fields of Biomedicine and Materials.

Polymer self-assembly can prepare various shapes and sizes of pores, making it widely used. The complexity and diversity of biomolecules make them a unique class of building blocks for precise assembly. They are particularly suitable for the new generation of biomaterials integrated with life systems as they possess inherent characteristics such as accurate identification, self-organization, and adaptability. Therefore, many excellent methods developed have led to various practical results. At the same time, the development of advanced science and technology has also expanded the application scope of self-assembly of synthetic polymers. By utilizing this technology, materials with unique shapes and properties can be prepared and applied in the field of tissue engineering. Nanomaterials with transparent and conductive properties can be prepared and applied in fields such as electronic displays and smart glass. Multi-dimensional, controllable, and multi-level self-assembly between nanostructures has been achieved through quantitative control of polymer dosage and combination, chemical modification, and composite methods. Here, we list the classic applications of natural- and artificially synthesized polymer self-assembly in the fields of biomedicine and materials, introduce the cutting-edge technologies involved in these applications, and discuss in-depth the advantages, disadvantages, and future development directions of each type of polymer self-assembly.

Impact of metabolic and bariatric surgery on weight loss and insulin requirements in type 1 and insulin-treated type 2 diabetes.

Metabolic and Bariatric Surgery (MBS) is effective in improving metabolic outcomes and reducing weight in patients with obesity and diabetes, with less explored benefits in type 1 diabetes (T1D). This study aimed to evaluate the impact of MBS on weight loss and insulin requirements in T1D patients compared to insulin-treated type 2 diabetes (T2D) patients over a 5-year period. This retrospective analysis included patients who underwent primary sleeve gastrectomy (SG) or Roux-en-Y gastric bypass (RYGB) with a confirmed preoperative diagnosis of either T1D or insulin-treated T2D. Primary endpoints focusing on weight loss and secondary outcomes assessing changes in insulin dosage and glycemic control. After 5 years, weight loss was similar across groups, with total weight loss at 14.2% for T1D and 17.6% for insulin-treated T2D in SG, and 22.6% for T1D vs. 26.8% for insulin-treated T2D in RYGB. Additionally, there was a significant reduction in median daily insulin doses from 140.5 units at baseline to 77.5 units at 1 year postoperatively, sustained at 90 units at 5 years. The differential impact of MBS procedure was also highlighted, where RYGB patients showed a more pronounced and enduring decrease in insulin requirements compared to SG.

Swellable Microneedles in Drug Delivery and Diagnostics.

This manuscript explores the transformative potential of swellable microneedles (MNs) in drug delivery and diagnostics, addressing critical needs in medical treatment and monitoring. Innovations in hydrogel-integrated MN arrays facilitate controlled drug release, thereby expanding treatment options for chronic diseases and conditions that require precise dosage control. The review covers challenges, such as scalability, patient compliance, and manufacturing processes, as well as achievements in advanced manufacturing, biocompatibility, and versatile applications. Nonetheless, limitations in physiological responsiveness and long-term stability remain, necessitating further research in material innovation and integration with digital technologies. Future directions focus on expanding biomedical applications, material advancements, and regulatory considerations for widespread clinical adoption.

Dynamic impacts of short-term bath administration of enrofloxacin on juvenile black seabream Acanthopagrus schlegelii

Dynamic impacts of short-term enrofloxacin (ENR) exposure on juvenile marine fish are not well understood, and the underlying mechanisms remain unclear. We therefore investigated the accumulation and elimination of ENR in the liver of juvenile black seabream Acanthopagrus schlegelii. Meanwhile, the dynamic alterations of biochemical parameters and liver transcriptomes after short-term bath immersion and withdrawal treatment were explored. The results indicated that the contents of ENR in the liver were significantly increased after bath administration for 24 h, and then quickly declined to very low concentrations along with the decontamination time increasing. Judging from the changes in biochemical indicators and liver transcriptomic alterations, 0.5 and 1 mg/L ENR exposure for 24 h triggered oxidative stress, impairment of immune system, as well as aberrant lipid metabolism via differential molecular pathways. Interestingly, biochemical and transcriptome analysis as well as integrated biomarker response (IBR) values showed that more significant changes appeared in 1 mg/L ENR group at decontamination periods, which indicated that the impact of high dose ENR on juvenile A. schlegelii may persist even after depuration for 7 days. These results revealed that the risk of short-term bath of 1 mg/L ENR should not be overlooked even after depuration period. Therefore, attention should be paid to the dosage control when administering the drug to juvenile A. schlegelii, and the restoration of physiological disturbance may be an important factor in formulating a reasonable treatment plan.

Automatic Control of Polymer Dosage Using Floc Images in Sludge Dewatering Plant

This study introduces a novel method for estimating floc conditions in sludge dewatering plants by employing image analysis and automatic control of polymer dosage. While previous research has focused on drinking water treatment plants, few reports address polymer dosage optimization using image analysis in sludge dewatering plants. The challenge lies in the high sludge dry solids hindering individual floc recognition due to overlap. The study aims to estimate floc conditions by focusing on gap areas between flocs and implementing automatic polymer dosage control accordingly. The proposed method uses images from an Internet Protocol camera and semantic segmentation to identify the floc gap area. For validation of the estimation method, variations of over and under polymer dosage scenarios were investigated and compared with commonly used floc area methods. The findings indicate that the gap area estimation effectively reproduces the theory of polymer cohesion. Automatic polymer dosage control based on this method demonstrates stable operation in both scenarios. Notably, automatic control outperformed manual operation during continuous operation, resulting in a significant reduction in polymer dosage and a notable increase in heating efficiency compared to manual control. This study presents an efficient approach to optimize polymer dosage in sludge dewatering plants, utilizing image analysis for real-time monitoring and control. By focusing on the gap area between flocs, the method enhances accuracy in estimating floc conditions, thereby improving overall dewatering efficiency. The findings highlight the practical benefits of implementing automatic control systems in sludge treatment plants, potentially reducing costs and environmental impact.

Epigenome editing revealed the role of DNA methylation of T-DMR/CpG island shore on Runx2 transcription

RUNX2 is a transcription factor crucial for bone formation. Mutant mice with varying levels of Runx2 expression display dosage-dependent skeletal abnormalities, underscoring the importance of Runx2 dosage control in skeletal formation. RUNX2 activity is regulated by several molecular mechanisms, including epigenetic modification such as DNA methylation. In this study, we investigated whether targeted repressive epigenome editing including hypermethylation to the Runx2-DMR/CpG island shore could influence Runx2 expression using Cas9-based epigenome-editing tools. Through the transient introduction of CRISPRoff-v2.1 and gRNAs targeting Runx2-DMR into MC3T3-E1 cells, we successfully induced hypermethylation of the region and concurrently reduced Runx2 expression during osteoblast differentiation. Although the epigenome editing of Runx2-DMR did not impact the expression of RUNX2 downstream target genes, these results indicate a causal relationship between the epigenetic status of the Runx2-DMR and Runx2 transcription. Additionally, we observed that hypermethylation of the Runx2-DMR persisted for at least 24 days under growth conditions but decreased during osteogenic differentiation, highlighting an endogenous DNA demethylation activity targeting the Runx2-DMR during the differentiation process. In summary, our study underscore the usefulness of the epigenome editing technology to evaluate the function of endogenous genetic elements and revealed that the Runx2-DMR methylation is actively regulated during osteoblast differentiation, subsequently could influence Runx2 expression.

Nanoparticles for the treatment of spinal cord injury.

Spinal cord injuries lead to significant loss of motor, sensory, and autonomic functions, presenting major challenges in neural regeneration. Achieving effective therapeutic concentrations at injury sites has been a slow process, partly due to the difficulty of delivering drugs effectively. Nanoparticles, with their targeted delivery capabilities, biocompatibility, and enhanced bioavailability over conventional drugs, are garnering attention for spinal cord injury treatment. This review explores the current mechanisms and shortcomings of existing treatments, highlighting the benefits and progress of nanoparticle-based approaches. We detail nanoparticle delivery methods for spinal cord injury, including local and intravenous injections, oral delivery, and biomaterial-assisted implantation, alongside strategies such as drug loading and surface modification. The discussion extends to how nanoparticles aid in reducing oxidative stress, dampening inflammation, fostering neural regeneration, and promoting angiogenesis. We summarize the use of various types of nanoparticles for treating spinal cord injuries, including metallic, polymeric, protein-based, inorganic non-metallic, and lipid nanoparticles. We also discuss the challenges faced, such as biosafety, effectiveness in humans, precise dosage control, standardization of production and characterization, immune responses, and targeted delivery in vivo. Additionally, we explore future directions, such as improving biosafety, standardizing manufacturing and characterization processes, and advancing human trials. Nanoparticles have shown considerable progress in targeted delivery and enhancing treatment efficacy for spinal cord injuries, presenting significant potential for clinical use and drug development.

Integrated high-throughput drug screening microfluidic system for comprehensive ocular toxicity assessment

Traditional experimental methodologies suffer from a few limitations in the toxicological evaluation of the preservatives added to eye drops. In this study, we overcame these limitations by using a microfluidic device. We developed a microfluidic system featuring a gradient concentration generator for preservative dosage control with microvalves and micropumps, automatically regulated by a programmable Arduino board. This system facilitated the simultaneous toxicological evaluation of human corneal epithelial cells against eight different concentrations of preservatives, allowing for quadruplicate experiments in a single run. In our study, the IC50 values for healthy eyes and those affected with dry eyes syndrome showed an approximately twofold difference. This variation is likely attributable to the duration for which the preservative remained in contact with corneal cells before being washed off by the medium, suggesting the significance of exposure time in the cytotoxic effect of preservatives. Our microfluidic system, automated by Arduino, simulated healthy and dry eye environments to study benzalkonium chloride toxicity and revealed significant differences in cell viability, with IC50 values of 0.0033% for healthy eyes and 0.0017% for dry eyes. In summary, we implemented the pinch-to-zoom feature of an electronic tablet in our microfluidic system, offering innovative alternatives for eye research.