Donor Compartment Research Articles

3D printed permeation module to monitor interaction of cell membrane transporters with exogenic compounds in real-time

A new design of permeation module based on 3D printing was developed to monitor the interaction of exogenic compounds with cell membrane transporters in real-time. The fluorescent marker Rhodamine 123 (Rho123) was applied as a substrate to study the activity of the P-glycoprotein membrane transporter using the MDCKII-MDR1 genetically modified cell line. In addition, the inhibitory effect of verapamil (Ver), a prototype P-glycoprotein inhibitor, was examined in the module, demonstrating an enhanced Rho123 transfer and accumulation into cells as well as the applicability of the module for P-glycoprotein inhibitor testing. Inhibition was demonstrated for different ratios of Rho123 and Ver, and their competition in terms of interaction with the P-glycoprotein transporter was monitored in real-time. Employing the 3D-printed module, permeation testing was shortened from 8 h in the conventional module to 2 h and evaluation based on kinetic profiles in every 10 min was possible in both donor and acceptor compartments. We also show that monitoring Rho123 levels in both compartments enables calculate the amount of Rho123 accumulated inside cells without the need of cell lysis.

Transdermal Transport In Vitro of Domperidone by Compartmental Modeling Approach

Transdermal delivery can be alternatively chosen for domperidone to improve its low oral bioavailability. Development drugs into transdermal formulation need information about the transport mechanism of the drug. The purpose of this study was to develop models of domperidone transdermal transport in vitro based on compartmental modeling for understanding the domperidone transport mechanism. Domperidone solution (0,5 g/L in a citric buffer, pH 5) was filled into the donor compartment. The comparative study also conducted to examine the effect of different pH on domperidone transdermal transport in pH 1 (4g/L in 0,1 M HCl). The shed snake-skin and cellophane membrane were pretreated for 1 hour with chemical enhancers (oleic acid in propylene glycol) and assembled between the donor and the receptor compartment of the vertical diffusion cell. The receptor compartment was filled in with phosphate-buffered saline at a pH of 6.8. The permeation study was performed for 8 hours.
 Samples concentration was assayed by the UV-Spectrophotometry method. The cumulative permeation profiles of domperidone were analyzed using WinSAAM. Three and four-compartmental models were proposed with the one lag compartment. The evaluation of the appropriate number of compartments in the transport model was examined based on the visual goodness of fit (GOF) and the Corrected Akaike’s Information Criterion (AICc) values. Four-compartmental models with one lag compartment were the best model describing percutaneous domperidone transport either in pH donor of 5 or pH 1. The model indicates domperidone transport follows into two parallel routes, including a lag compartment.

The role of temperature in the formation of human-mimetic artificial cell membranes using droplet interface bilayers (DIBs).

Droplet interface bilayers (DIBs) have recently started to be used as human-mimetic artificial cell membranes. DIBs are bilayer sections created at the interface of two aqueous droplets, such that one droplet can be used as a donor compartment and the other as an acceptor compartment for the quantification of molecular transport across the artificial cell membrane. However, synthetic phospholipids are overwhelmingly used to create DIBs instead of naturally derived phospholipids, even though the diverse distribution of phospholipids in the latter is more biomimetic. We present the first systematic study of the role of temperature in DIB formation, which shows that the temperature at which DIBs are formed is a key parameter for the formation of DIBs using naturally derived phospholipids in a microfluidic platform. The phospholipids that are most abundant in mammalian cell membranes (phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylserine (PS), and phosphatidylinositol (PI)) only form DIBs when the temperature is above the phase transition temperature (Tm). Similarly, DIB formation usually only occurs above the highest Tm of a single phospholipid in a bespoke formulation. In addition, we show a new phenomenon wherein the DIB "melts" without disintegrating for bilayers formed predominantly of phospholipids that occupy cylindrical spaces. We also demonstrate differences in DIB formation rates as well as permeability of these biomimetic membranes. Given the difficulties associated with making DIBs using naturally derived phospholipids, we anticipate this work will illuminate the role of phospholipid phase transition in mono- and bilayer formation and lay the foundation for DIBs to be used as human-mimetic artificial cell membranes.

Penetration of Flurbiprofen from a Locally Applied Sore Throat Lozenge and Spray into Cadaveric Human Pharynx Tissue: A Novel ex vivo Model and Microautoradiography Method.

ObjectiveFlurbiprofen 8.75 mg lozenge and spray are used for symptomatic relief of sore throat, with a rapid onset of analgesia suggesting a localized mechanism of action. Building on previous studies, this investigation aimed to use microautoradiography to visualize the depth penetration of radiolabeled flurbiprofen into human pharynx tissue using an ex vivo model. Quantification of flurbiprofen in the tissue was performed to provide a quantitative representation of flurbiprofen distribution through the tissue.MethodsCadaveric human pharynx tissue was mounted between the donor and receiver compartments of a Franz diffusion cell. After that 8.75 mg spray and dissolved lozenge formulations, containing radiolabeled flurbiprofen, were added to the donor compartment of a Franz diffusion cell. After incubation for one hour, the pharynx tissue was removed, processed, and sectioned both horizontally and vertically. The sections were placed within an imaging cassette to determine the penetration of radiolabeled flurbiprofen visually, before being solubilized to quantify the amount of flurbiprofen present in each section.ResultsIn the horizontally sectioned samples, flurbiprofen was present in the top layers of all replicates and decreased in intensity throughout the tissue. Of the applied dose, 48.0–99.9% of flurbiprofen was detected in the top one-third of the pharynx tissue, closest to the dosing site, and 0–14.8% of flurbiprofen was detected within the deepest third of pharynx tissue, furthest from the dosing site. In the vertically sectioned tissue samples, radiolabeled flurbiprofen was found at a high intensity at the dosing site and reduced in intensity throughout the thickness of the tissue. Lateral penetration of flurbiprofen was also seen in tissue dosed with the spray.ConclusionOur findings demonstrate that lozenge and spray formulations of flurbiprofen can penetrate throughout the layers of cadaveric human pharynx tissue in an ex vivo model, as visualized by microautoradiography.

In vitro pH dependent passive transport of ketoprofen and metformin.

The kinetics of passive transport of ketoprofen and metformin, as model substances for high and low permeability, respectively, across the artificial membrane under the influence of the pH of donor solution was investigated. There was an upward trend in the apparent permeation coefficient (Papp) of ketoprofen with the decrease in pH to a value close to pKa. At the pH value below pKa the permeation coefficient had lower value, due to the higher retention of ketoprofen in the artificial membrane. Metformin is a low permeable compound, and the highest permeation values were recorded at pH 7.4. Two dissociation constants determine that metformin at physiological pH exists as a hydrophilic cationic molecule, i.e. predominantly in ionized form. At pH values below 2.8, metformin mainly exists in diprotonated form, and it was, thus, very poorly permeable. The highest retention, i.e. affinity of both ketoprofen and metformin to the membrane, was at the lowest pH values, which is explained by different mechanisms. At higher pH values of donor compartment the substances showed significantly less affinity to the membrane. The obtained values of apparent permeation coefficients at studied pH values showed good correlation with the obtained experimental values by other in vitro methods.

Pulmonary surfactant and drug delivery: Vehiculization, release and targeting of surfactant/tacrolimus formulations

This work explores the potential for strategizing pulmonary surfactant (PS) for drug delivery over the respiratory air-liquid interface: the interfacial delivery. The efficacy of PS- and interface-assisted drug vehiculization was determined both in vitro and in vivo using a native purified porcine PS combined with the hydrophobic anti-inflammatory drug Tacrolimus (TAC), a calcineurin inhibitor. In vitro assays were conducted in a novel double surface balance setup designed to emulate compression-expansion dynamics applied to interfacially connected drug donor and recipient compartments. In this setup, PS transported TAC efficiently over air-liquid interfaces, with compression/expansion breathing-like dynamics enhancing rapid interface-assisted diffusion and drug release. The efficacy of PS-assisted TAC vehiculization was also evaluated in vivo in a mouse model of lipopolysaccharide (LPS)-induced acute lung injury (ALI). In anesthetized mice, TAC combined with PS was intra-nasally (i.n) instilled prior administering i.n. LPS. PS/TAC pre-treatment caused greater TAC internalization into a higher number of lung cells obtained from bronchoalveolar lavages (BAL) than TAC pre-treatment alone. Additionally, the PS/TAC combination but not TAC or PS alone attenuated the LPS-induced pro-inflammatory effects reducing cells and proteins in BAL fluid. These findings indicated that PS-mediated increase in TAC uptake blunted the pro-injurious effects of LPS, suggesting a synergistic anti-inflammatory effect of PS/drug formulations. These in vitro and in vivo results establish the potential utility of PS to open novel effective delivery strategies for inhaled drugs.

Complex roles of Rabs and SNAREs in the secretory pathway and plant development: a never-ending story.

Membrane trafficking is critical for cell compartmentation which allows the maintenance of specialised environments required for specific cellular activities. To achieve this goal, cells need to tightly regulate vesicle transport between donor and acceptor compartments. Several different protein families are involved: among them the SNAREs (65 genes) and the small GTPases Rabs (57 genes) show the highest number of isoforms and will be in the spotlight. We will focus on the roles of these proteins in the ER-Golgi-plasma membrane pathway to illustrate how Rabs and SNAREs are involved to achieve specific set of functions. LAY DESCRIPTION: Protein and lipid transport between the different compartments inside cells are critical for many physiological functions of organisms. To achieve this goal, cells have developed several vesicular transport systems between these compartments. Numerous different protein families are involved in these processes among which two protein families are the focus of the review in plant cells: the SNAREs and the small GTPases Rabs. These proteins are essentially controlling the different steps of the transport processes to warrant that proteins and lipids will reach the right compartments. The SNAREs are encoded by 65 genes meaning that plant cells synthesise 65 different SNARE proteins, and the small GTPases Rabs are encoded by 57 genes meaning that plant cells synthesise 57 different GTPases Rabs proteins. This high number of proteins illustrates the complexity of the vesicular transport systems existing between plant cell compartments. The review discusses the different roles of these proteins in these processes and particularly in the functioning of the secretory pathway which contributes to transport proteins and lipids to the cell surface. The review describes how the Rabs and SNAREs proteins are involved to achieve their respective set of functions in the different transport pathways of plant cells, and illustrates the tremendous complexity of these mechanisms.

Radiation causes tissue damage by dysregulating inflammasome-gasdermin D signaling in both host and transplanted cells.

Radiotherapy is a commonly used conditioning regimen for bone marrow transplantation (BMT). Cytotoxicity limits the use of this life-saving therapy, but the underlying mechanisms remain poorly defined. Here, we use the syngeneic mouse BMT model to test the hypothesis that lethal radiation damages tissues, thereby unleashing signals that indiscriminately activate the inflammasome pathways in host and transplanted cells. We find that a clinically relevant high dose of radiation causes severe damage to bones and the spleen through mechanisms involving the NLRP3 and AIM2 inflammasomes but not the NLRC4 inflammasome. Downstream, we demonstrate that gasdermin D (GSDMD), the common effector of the inflammasomes, is also activated by radiation. Remarkably, protection against the injury induced by deadly ionizing radiation occurs only when NLRP3, AIM2, or GSDMD is lost simultaneously in both the donor and host cell compartments. Thus, this study reveals a continuum of the actions of lethal radiation relayed by the inflammasome-GSDMD axis, initially affecting recipient cells and ultimately harming transplanted cells as they grow in the severely injured and toxic environment. This study also suggests that therapeutic targeting of inflammasome-GSDMD signaling has the potential to prevent the collateral effects of intense radiation regimens.

Controlled Delivery of Apomorphine Through Buccal Mucosa, Towards a Noninvasive Administration Method in Parkinson's Disease: A Preclinical Mechanistic Study

Apomorphine (APO), a potent treatment for Parkinson's disease, is only administered parenterally either as intermittent injections or as an infusion. This is due to extensive hepatic “first pass” metabolism. Prolonged delivery through buccal mucosa may be potential substitute for parenteral infusions. To investigate this concept of buccal mucosal delivery, permeability ex vivo studies were performed through excised porcine buccal mucosa by utilizing Ussing diffusion chamber. Permeability rates were assessed for APO from simulated saliva medium at pH 7.4 as well as with utilization of different permeability modifying methods. Lowering the pH to 5.9 decreased permeability rate six-fold, while addition of ethanol : propylene glycol solution elevated it four-fold. Addition of nano-scale lipospheres to the donor compartment delayed the accumulation of APO at the receiver side, prolongating the lag-time from one to approx. three hours. These findings were strengthened by results obtained with co-administration of permeability markers (standards) atenolol and metoprolol. Simulation of the obtained permeability rates to in vivo setup in human showed therapeutically relevant plasma levels when using the outcomes of the current study. These findings verify the novel concept of APO prolonged release buccal administration as a noninvasive substitute for parenteral infusions in treating Parkinson's disease.

Design and development of a novel fused filament fabrication (FFF) 3D printed diffusion cell with UV imaging capabilities to characterise permeation in pharmaceutical formulations

The present work aimed at designing and developing a novel 3D printed diffusion cell capable of UV imaging using the fused filament fabrication (FFF) method. UV imaging has proven to be very versatile in the area of pharmaceutics giving insights into various phenomena including the dissolution behaviour of dosage forms, intrinsic dissolution rates and the drug precipitation processes. A 3D printed diffusion cell in the similitude of a Franz cell was successfully printed using polylactic acid (PLA) filaments equipped with quartz for the imaging area. A model ibuprofen (IBU) gel formulation was tested by introducing the dosage form through the 3D printed donor compartment. The drug concentration permeated through the skin mimic (silicone membrane) was determined from the 3D printed receptor compartment using UV imaging in real-time. The results showed successful UV imaging of the permeation of IBU gel in the novel diffusion cell potentially negating further analytical testing such as the HPLC process required for Franz cell tests thereby reducing costs. Potential interactions between the drug and filament used in the 3D printed process suggests although this concept can be moved towards commercialisation, care should be taken with choice of filament used in the 3D printing process.

Autophagosome Biogenesis in Plants: An Actin Cytoskeleton Perspective.

At the subcellular level, the cytoskeleton regulates cell structure, organelle movement, and cytoplasmic streaming. Autophagy is a process to remove unwanted biomaterials or damaged organelles through double membrane compartments known as autophagosomes. Autophagosome biogenesis requires vesicle trafficking between donor and acceptor compartments, membrane expansion, and fusion, which is very likely to be regulated by the cytoskeleton. Recent studies have demonstrated that by knocking out key actin-regulating proteins, autophagosome biogenesis is inhibited. However, the formation of ATG8 positive structures are not affected when the entire actin network is disrupted. Here, we discuss this paradox and propose the function of the actin cytoskeleton in plant autophagy.

Regular Solution Theory for Polymer Permeation Transients: A Toolkit for Understanding Experimental Waveshapes.

The accurate measurement of permeation is important at the product design stage for a variety of industries as diverse as conveyance methods for oil and gas produced fluids, such as mixtures of carbon dioxide, methane, hydrogen sulfide, water, and hydrocarbons, and in polymer-lined, unbonded flexible risers and flow lines through connectors and valves, hydrogen and methane gas carrying domestic lines, hydrogen storage tanks, sulfur hexafluoride circuit breakers for high power-carrying lines, oxygen through display technology, and drug delivery. It would also be appropriate to monitor the permeation rate through the polymer, composite, and elastomeric layers during the in-service times where applications allow. In the future, any alteration in the short term and long-term transport rates could be analyzed in terms of an initial alteration or degradation of the polymeric materials and, in some cases, metallic components. Crucially, such measurements would serve as an early warning system of any change in a polymeric material that could result in the loss of function of the fluid of a gas containing barrier material. Most experimental determinations are made through recording flux transients (varying flux) through permeation cells in which a polymer membrane or film separates a donor compartment (usually an infinite supply) and an acceptor compartment and in which membrane transport is considered to be slow. Treatment of the resulting experimental data is usually, but not always, undertaken through comparison with a steady-state model based on Fickian diffusion through the membrane, so as to extract the membrane permeability, the diffusion coefficient of the permeant, and the solubility of the permeant in the membrane phase. However, in spite of these measurements being undertaken routinely using closed cell manometric or continuous flow methods, there is a lack of literature in which experimental flux transients are provided, and in several cases, it is clear that the experimental data do not conform to the expected model of slow, Fickian diffusion through the membrane, even though experiments are performed at temperatures much higher than the glass transition temperature of the polymer membrane. In this paper, we first re-examine the classical model for an infinite source and extend it to account for (1) molecular interactions between membrane and permeant, using regular solution theory, (2) slow transport in the acceptor phase, and (3) slow kinetics across the membrane|acceptor interface. We demonstrate that all three aspects can cause permeation flux transients to exhibit unusual, nonclassical waveshapes, which have nevertheless been experimentally realized without rationalization. This enables the development of an algorithmic toolkit for the interpretation of permeation flux transients, so as to provide reliable and accurate data analysis for experimentalists.

An in vitro dissolution–digestion–permeation assay for the study of advanced drug delivery systems

Advanced drug delivery systems (ADDS) are widely explored to overcome poor aqueous solubility of orally administered drugs. However, the prediction of their in vivo performance is challenging, as in vitro models typically do not capture the interplay between processes occurring in the gut. In additions, different models are used to evaluate the different systems. We therefore present a method that allows monitoring of luminal processing (dissolution, digestion) and its interplay with permeation to better inform on the absorption of felodipine formulated as ADDS. Experiments were performed in a µFLUX-apparatus, consisting of two chambers, representing the intestinal and serosal compartment, separated by Caco-2 monolayers. During dissolution–digestion–permeation experiments, ADDS were added to the donor compartment containing simulated intestinal fluid and immobilized lipase. Dissolution and permeation in both compartments were monitored using in situ UV-probes or, when turbidity interfered the measurements, with HPLC analysis.The method showed that all ADDS increased donor and receiver concentrations compared to the condition using crystalline felodipine. A poor correlation between the compartments indicated the need for an serosal compartment to evaluate drug absorption from ADDS. The method enables medium-throughput assessment of: (i) dynamic processes occurring in the small intestine, and (ii) drug concentrations in real-time.

The Significance of Utilizing In Vitro Transfer Model and Media Selection to Study the Dissolution Performance of Weak Ionizable Bases: Investigation Using Saquinavir as a Model Drug.

This study investigated the dissolution behavior of BCS class II ionizable weak base Saquinavir and its mesylate salt in the multi-compartment transfer setup employing different composition of dissolution media. The dissolution behavior of Saquinavir was studied by using a two-compartment transfer model representing the transfer of drug from the stomach (donor compartment) to the upper intestine (acceptor compartment). Various buffers like phosphate, bicarbonate, FaSSIF, and FeSSIF were employed. The dissolution was also studied in the concomitant presence of the additional solute, i.e., Quercetin. Further, the dissolution profiles of Saquinavir and its mesylate salt were simulated by GastroPlusTM, and the simulated dissolution profiles were compared against the experimental ones. The formation of in situ HCl salt and water-soluble amorphous phosphate aggregates was confirmed in the donor and acceptor compartments of the transfer setup, respectively. As the consequence of the lower solubility product of HCl salt of Saquinavir, the solubility advantage of mesylate salt was vanished leading to the lower than the predicted dissolution in the acceptor compartment. However, the formation of water-soluble aggregates in the presence of the phosphate salts was observed leading to the higher than the predicted dissolution of the free base in the transfer setup. Interestingly, the formation of such water-soluble aggregates was found to be hindered in the concomitant presence of an ionic solute resulting in the lower dissolution rates. The in situ generation of salts and aggregates in the transfer model lead to the inconsistent prediction of dissolution profiles by GastroPlusTM.

Absorptive Dissolution Testing: An Improved Approach to Study the Impact of Residual Crystallinity on the Performance of Amorphous Formulations

Amorphous solid dispersions typically improve the oral bioavailability of poorly soluble drugs. However, residual crystallinity is always a concern, in terms of potential impact on the product stability and performance. Consequently, in vitro tools that allow biorelevant assessment of residual crystallinity are of interest. The goal of the present study was to use absorptive dissolution testing to evaluate the impact of different levels of crystallinity in an amorphous formulation on membrane mass transport kinetics and supersaturation-time profiles. Partial crystallinity was induced in commercially available tacrolimus formulations by exposure to moderate temperature and high relative humidity. A hollow fiber membrane was coupled to a dissolution vessel to create an absorptive dissolution testing apparatus, and concentration-time profiles were simultaneously monitored during dissolution (donor compartment) and after absorption across the membrane (receiver compartment). The coupled dissolution-absorption measurements indicated that residual crystallinity impacted the absorption profiles in a manner that depended on the volume of fluid used for the dissolution measurement. A high percentage of residual crystallinity hampered the drug release from the formulation. Higher supersaturation in nonsink dissolution conditions improved mass transfer rates; however, the presence of seed crystals led to rapid desupersaturation. Further systematic studies to delineate the interplay between the rate of absorption and desupersaturation revealed that for a given dissolution rate, the crystallization rate would supersede the absorption rate only at high supersaturations. Thus, seeds have a lower impact on absorption when the overall supersaturation generated is lower. This study underscores the importance of considering competing physical processes when evaluating amorphous formulations. A further consideration highlighted is that different fluid volumes may impact the absorption profile for supersaturating dosage forms. Absorptive dissolution testing appears to be a potentially valuable tool to mechanistically investigate amorphous solid dispersion formulation release and phase behavior under more biorelevant conditions.

Three-Compartment Model Analysis with Minimal Sampling Points in the Caco-2 Permeability Assay.

The purpose of this study was to establish a modified method of three-compartment model analysis that minimized the sampling frequency. A Caco-2 permeability assay was performed on ten structurally diverse compounds with passive diffusion. A three-compartment model was analyzed by a conventional method and a method with fewer sampling points, called the simplified method, using concentration-time profiles in the donor, intracellular, and receiver compartments. The concentration-time profiles in all compartments were well described by the conventional method. The calculated unbound fraction of intracellular (fu2) and apparent permeability coefficient (Papp) were 0.0107-1.22 and 0.886-146 × 10-6 cm/s, respectively. The simplified method also described the concentration profiles in the compartments of all ten compounds except one, ibuprofen. The difference in values calculated by the simplified method compared to the conventional method was between -7 and 7% for fu2 and between -6 and 42% for Papp. These results suggested that the parameter values from the simplified method were comparable with those from the conventional method. The simplified method may be a promising approach to improve the throughput of three-compartment model analyses of Caco-2 permeability assays in the early stages of drug discovery.

Donor Site Morbidity in Phalloplasty Reconstructions: Outcomes of the Radial Forearm Free Flap.

Background:The radial artery forearm free flap (RFFF) is the workhorse technique for phallus reconstruction. The RFFF provides good cosmesis and potential sensory recovery. However, the donor site is large in comparison to other applications of the RFFF which may increase the potential for donor site morbidity, such as nerve injury, delayed wound healing, and decreased hand strength. This study systematically reviewed the current literature to assess the donor site morbidity associated with RFFF phalloplasty (RFFFP).Methods:A systematic review utilizing Preferred Reporting Items for Systematic Review and Meta-Analyses guidelines was completed of the current literature pertaining to donor site morbidity after RFFFP. Two investigators independently reviewed the literature to determine eligibility for inclusion. Two hundred sixty-seven studies were reviewed and 10 were included in the final analysis after application of exclusion criteria.Results:Nine hundred forty flap reconstructions were identified. Gender affirming surgery was the indication in 77.7% (n = 730) of patients. The overall donor site complication rate was 7.9% (n = 74). Skin graft failure occurred in 41 patients (4.5%) and was the most frequent complication. Donor site infection (n = 3, 15.8%), hematoma (n = 1, 0.8%), neuroma (n = 1, 10%), compartment syndrome (n = 1, 0.8%), decreased strength or sensation (n = 15, 4.9%), lymphedema or limb swelling (n = 10, 3.9%), and contracture (n = 2, 6.5%) were also found.Conclusions:The most common donor site complication after RFFFP is skin graft failure. Decreased forearm sensation and strength affected a significant proportion of patients within each reported cohort. Prospective studies should continue to evaluate donor site morbidity with objective measures, such as grip strength evaluation, and long-term follow-up for vascular changes following radial artery harvest.

Non-Invasive Extraction of Gabapentin for Therapeutic Drug Monitoring by Reverse Iontophoresis: Effect of pH, Ionic Strength, and Polyethylene Glycol 400 in the Receiving Medium

Background: Monitoring of plasma concentrations is a necessity for narrow therapeutic index potent drugs. Development of non-invasive methods can save the patients from the trauma of needles and hence is considered as a research priority. Introduction: Gabapentin, an anti-epileptic drug requires therapeutic monitoring because of its narrow therapeutic index. The objective of the study was to develop a suitable method for the non-invasive extraction of gabapentin for the same. Methods: Transdermal reverse iontophoresis was performed using pig ear skin as a barrier membrane. Three compartment iontophoretic cells were used for the extraction study. Extractions were carried out under low intensity electric field (current intensity- 0.5 mA/cm2, electrical field approximately 5 V). The donor compartment was charged with aqueous gabapentin (10 µg/ml in phosphate buffer of pH 7.4). For studying the effect of receiving vehicle (pH, ionic strength, and enhancer) on the extraction efficiency of gabapentin, the two receiver chambers were charged with media having varying concentration of these factors. Drug content was determined by HPLC. Results: Compared to other pHs, cumulative extraction of gabapentin at pH 5 was significantly higher at both anode and cathode (p<0.001). At low ionic strength, extraction of gabapentin increased linearly with the increase in concentration of ions up to a certain value but at very high ionic strength the pattern reversed. Similar results were obtained with enhancer (polyethylene glycol 400). Extraction increased with increase in polyethylene glycol 400 up to 3% and then decreased. Conclusion: Extraction flux can be optimized by manipulation of the receiver media.

Transport characteristics in a novel in vitro release model for testing the performance of intra-articular injectables

There is a need for bio-predictive and well-characterized in vitro release models in the development of intra-articular depot formulations. Here, the commercially-available Scissor system, a membrane-based two-compartment release testing instrument, was applied to characterize the transport and release of the drug diclofenac employing conditions intended to mimic transport in the synovial joint. The fate of hyaluronic acid and human serum albumin, the main bio-relevant components incorporated in the system, was investigated. A promising strategy for providing sustained drug release upon intra-articular administration are lipid-based preformulations forming non-lamellar liquid crystalline phases in situ. The usefulness of the Scissor system for investigating the initial drug release from these delivery systems was evaluated. The diclofenac release rate upon injection of an aqueous solution was influenced by the composition of the injection site matrix, i.e. the hyaluronic acid content. Hyaluronic acid and human serum albumin were found to escape from the donor compartment into the acceptor medium through the employed polycarbonate membrane. Sustained diclofenac release was obtained by formation of highly viscous liquid crystalline phases upon injection of the lipid-based preformulations. The study shows the feasibility and potential of the Scissor system for testing initial release of intra-articular depot formulations of low-molecular-weight drug compounds.

A MALDI-TOF-based Method for Studying the Transport of BBB Shuttles\u2014Enhancing Sensitivity and Versatility of Cell-Based In Vitro Transport Models

In recent decades, peptide blood-brain barrier shuttles have emerged as a promising solution for brain drugs that are not able to enter this organ. The research and development of these compounds involve the use of in vitro cell-based models of the BBB. Nevertheless, peptide transport quantification implies the use of large amounts of peptide (upper micromolar range for RP-HPLC-PDA) or of derivatives (e.g. fluorophore or quantum-dot attachment, radiolabeling) in the donor compartment in order to enhance the detection of these molecules in the acceptor well, although their structure is highly modified. Therefore, these methodologies either hamper the use of low peptide concentrations, thus hindering mechanistic studies, or do not allow the use of the unmodified peptide. Here we successfully applied a MALDI-TOF MS methodology for transport quantification in an in vitro BBB cell-based model. A light version of the acetylated peptide was evaluated, and the transport was subsequently quantified using a heavy internal standard (isotopically acetylated). We propose that this MALDI-TOF MS approach could also be applied to study the transport across other biological barriers using the appropriate in vitro transport models (e.g. Caco-2, PAMPA).