Domain-swapped Dimer Research Articles

Structure and stability of recombinant bovine odorant-binding protein: I. Design and analysis of monomeric mutants.

Bovine odorant-binding protein (bOBP) differs from other lipocalins by lacking the conserved disulfide bond and for being able to form the domain-swapped dimers. To identify structural features responsible for the formation of the bOBP unique dimeric structure and to understand the role of the domain swapping on maintaining the native structure of the protein, structural properties of the recombinant wild type bOBP and its mutant that cannot dimerize via the domain swapping were analyzed. We also looked at the effect of the disulfide bond by designing a monomeric bOBPs with restored disulfide bond which is conserved in other lipocalins. Finally, to understand which features in the microenvironment of the bOBP tryptophan residues play a role in the defining peculiarities of the intrinsic fluorescence of this protein we designed and investigated single-tryptophan mutants of the monomeric bOBP. Our analysis revealed that the insertion of the glycine after the residue 121 of the bOBP prevents domain swapping and generates a stable monomeric protein bOBP-Gly121+. We also show that the restored disulfide bond in the GCC-bOBP mutant leads to the noticeable stabilization of the monomeric structure. Structural and functional analysis revealed that none of the amino acid substitutions introduced to the bOBP affected functional activity of the protein and that the ligand binding leads to the formation of a more compact and stable state of the recombinant bOBP and its mutant monomeric forms. Finally, analysis of the single-tryptophan mutants of the monomeric bOBP gave us a unique possibility to find peculiarities of the microenvironment of tryptophan residues which were not previously described.

A Potential Structural Switch for Regulating DNA-Binding by TEAD Transcription Factors

TEA domain (TEAD) transcription factors are essential for the normal development of eukaryotes and are the downstream effectors of the Hippo tumor suppressor pathway. Whereas our earlier work established the three-dimensional structure of the highly conserved DNA-binding domain using solution NMR spectroscopy, the structural basis for regulating the DNA-binding activity remains unknown. Here, we present the X-ray crystallographic structure and activity of a TEAD mutant containing a truncated L1 loop, ΔL1 TEAD DBD. Unexpectedly, the three-dimensional structure of the ΔL1 TEAD DBD reveals a helix-swapped homodimer wherein helix 1 is swapped between monomers. Furthermore, each three-helix bundle in the domain-swapped dimer is a structural homolog of MYB-like domains. Our investigations of the DNA-binding activity reveal that although the formation of the three-helix bundle by the ΔL1 TEAD DBD is sufficient for binding to an isolated M-CAT-like DNA element, multimeric forms are deficient for cooperative binding to tandemly duplicated elements, indicating that the L1 loop contributes to the DNA-binding activity of TEAD. These results suggest that switching between monomeric and domain-swapped forms may regulate DNA selectivity of TEAD proteins.

Molecular and Structural Characterization of a Novel Escherichia coli Interleukin Receptor Mimic Protein.

ABSTRACTUrinary tract infection (UTI) is a disease of extremely high incidence in both community and nosocomial settings. UTIs cause significant morbidity and mortality, with approximately 150 million cases globally per year. Uropathogenic Escherichia coli (UPEC) is the primary cause of UTI and is generally treated empirically. However, the rapidly increasing incidence of UTIs caused by multidrug-resistant UPEC strains has led to limited available treatment options and highlights the urgent need to develop alternative treatment and prevention strategies. In this study, we performed a comprehensive analysis to define the regulation, structure, function, and immunogenicity of recently identified UPEC vaccine candidate C1275 (here referred to as IrmA). We showed that the irmA gene is highly prevalent in UPEC, is cotranscribed with the biofilm-associated antigen 43 gene, and is regulated by the global oxidative stress response OxyR protein. Localization studies identified IrmA in the UPEC culture supernatant. We determined the structure of IrmA and showed that it adopts a unique domain-swapped dimer architecture. The dimeric structure of IrmA displays similarity to those of human cytokine receptors, including the interleukin-2 receptor (IL-2R), interleukin-4 receptor (IL-4R), and interleukin-10 receptor (IL-10R) binding domains, and we showed that purified IrmA can bind to their cognate cytokines. Finally, we showed that plasma from convalescent urosepsis patients contains high IrmA antibody titers, demonstrating the strong immunogenicity of IrmA. Taken together, our results indicate that IrmA may play an important role during UPEC infection.

A Rigid Hinge Region Is Necessary for High-Affinity Binding of Dimannose to Cyanovirin and Associated Constructs

Mutations in the hinge region of cyanovirin-N (CVN) dictate its preferential oligomerization state. Constructs with the Pro51Gly mutation preferentially exist as monomers, whereas wild-type cyanovirin can form domain-swapped dimers under certain conditions. Because the hinge region is an integral part of the high-affinity binding site of CVN, we investigated whether this mutation affects the shape, flexibility, and binding affinity of domain B for dimannose. Our studies indicate that the capability of monomeric wild-type CVN to resist mechanical perturbations is enhanced when compared to that of constructs in which the hinge region is more flexible. Our computational results also show that enhanced flexibility leads to blocking of the binding site by allowing different rotational isomeric states of Asn53. Moreover, at higher temperatures, this observed flexibility leads to an interaction between Asn53 and Asn42, further hindering access to the binding site. On the basis of these results, we predicted that binding affinity for dimannose would be more favorable for cyanovirin constructs containing a wild-type hinge region, whereas affinity would be impaired in the case of mutants containing Pro51Gly. Experimental characterization by isothermal titration calorimetry of a set of cyanovirin mutants confirms this hypothesis. Those possessing the Pro51Gly mutation are consistently inferior binders.

Characterization of a Single b-type Heme, FAD, and Metal Binding Sites in the Transmembrane Domain of Six-transmembrane Epithelial Antigen of the Prostate (STEAP) Family Proteins

Six-transmembrane epithelial antigen of the prostate 3 (Steap3) is the major ferric reductase in developing erythrocytes. Steap family proteins are defined by a shared transmembrane domain that in Steap3 has been shown to function as a transmembrane electron shuttle, moving cytoplasmic electrons derived from NADPH across the lipid bilayer to the extracellular face where they are used to reduce Fe(3+) to Fe(2+) and potentially Cu(2+) to Cu(1+). Although the cytoplasmic N-terminal oxidoreductase domain of Steap3 and Steap4 are relatively well characterized, little work has been done to characterize the transmembrane domain of any member of the Steap family. Here we identify high affinity FAD and iron biding sites and characterize a single b-type heme binding site in the Steap3 transmembrane domain. Furthermore, we show that Steap3 is functional as a homodimer and that it utilizes an intrasubunit electron transfer pathway through the single heme moiety rather than an intersubunit electron pathway through a potential domain-swapped dimer. Importantly, the sequence motifs in the transmembrane domain that are associated with the FAD and metal binding sites are not only present in Steap2 and Steap4 but also in Steap1, which lacks the N-terminal oxidoreductase domain. This strongly suggests that Steap1 harbors latent oxidoreductase activity.

Insights into stabilizing interactions in the distorted domain-swapped dimer of Salmonella typhimurium survival protein.

The survival protein SurE from Salmonella typhimurium (StSurE) is a dimeric protein that functions as a phosphatase. SurE dimers are formed by the swapping of a loop with a pair of β-strands and a C-terminal helix between two protomers. In a previous study, the Asp230 and His234 residues were mutated to Ala to abolish a hydrogen bond that was thought to be crucial for C-terminal helix swapping. These mutations led to functionally inactive and distorted dimers in which the two protomers were related by a rotation of 167°. New salt bridges involving Glu112 were observed in the dimeric interface of the H234A and D230A/H234A mutants. To explore the role of these salt bridges in the stability of the distorted structure, E112A, E112A/D230A, E112A/H234A, E112A/D230A/H234A, R179L/H180A/H234A and E112A/R179L/H180A/H234A mutants were constructed. X-ray crystal structures of the E112A, E112A/H234A and E112A/D230A mutants could be determined. The dimeric structures of the E112A and E112A/H234A mutants were similar to that of native SurE, while the E112A/D230A mutant had a residual rotation of 11° between the B chains upon superposition of the A chains of the mutant and native dimers. The native dimeric structure was nearly restored in the E112A/H234A mutant, suggesting that the new salt bridge observed in the H234A and D230A/H234A mutants was indeed responsible for the stability of their distorted structures. Catalytic activity was also restored in these mutants, implying that appropriate dimeric organization is necessary for the activity of SurE.

The keratin-10 binding region of the pneumococcal serine rich repeat protein (PsrP) forms a domain-swapped dimer and intermolecular β-sheets – implications for biofilm formation ofStreptococcus pneumoniae

The keratin-10 binding region of the pneumococcal serine rich repeat protein (PsrP) forms a domain-swapped dimer and intermolecular β-sheets – implications for biofilm formation of<i>Streptococcus pneumoniae</i>

Domain-Swapping Switch Point in Ste20 Protein Kinase SPAK.

The related protein kinases SPAK and OSR1 regulate ion homeostasis in part by phosphorylating cation cotransporter family members. The structure of the kinase domain of OSR1 was determined in the unphosphorylated inactive form and, like some other Ste20 kinases, exhibited a domain-swapped activation loop. To further probe the role of domain swapping in SPAK and OSR1, we have determined the crystal structures of SPAK 63-403 at 3.1 Å and SPAK 63-390 T243D at 2.5 Å resolution. These structures encompass the kinase domain and different portions of the C-terminal tail, the longer without and the shorter with an activating T243D point mutation. The structure of the T243D protein reveals significant conformational differences relative to unphosphorylated SPAK and OSR1 but also has some features of an inactive kinase. Both structures are domain-swapped dimers. Sequences involved in domain swapping were identified and mutated to create a SPAK monomeric mutant with kinase activity, indicating that monomeric forms are active. The monomeric mutant is activated by WNK1 but has reduced activity toward its substrate NKCC2, suggesting regulatory roles for domain swapping. The structure of partially active SPAK T243D is consistent with a multistage activation process in which phosphorylation induces a SPAK conformation that requires further remodeling to build the active structure.

The crystal structure of heme acquisition system A from Yersinia pseudotuberculosis (HasAypt): Roles of the axial ligand Tyr75 and two distal arginines in heme binding

Some Gram-negative pathogens utilize an extracellular heme-binding protein called hemophore to satisfy their needs for iron, a metal element essential for most living things. We report here crystal structures of heme acquisition system A from Yersinia pseudotuberculosis (HasAypt) and its Y75A mutant. The wild-type HasAypt structure revealed that the heme iron is coordinated with Tyr75 and a water molecule. The heme-bound water molecule makes extensive hydrogen bond network that includes Arg40 and Arg144 on the distal heme pocket. Arg40, highly conserved for HasAs from Yersinia species, forms a salt bridge with the propionate side chain of heme, and makes π–π stacking and hydrophobic interactions with porphyrin plane. Interestingly, similar Arg–heme interactions are also found for periplasmic heme transporter, PhuT, suggesting that this is an example of a convergent evolution and one of the important interactions for bacterial heme transportation. Heme titration, heme binding kinetics, and the crystal structures of wild-type and Y75A proteins show that, although Tyr75 is primarily important for heme capturing, other interactions with Arg40, Arg144, and hydrophobic residues also contribute for heme acquisition. We also found that HasAypt can form a dimer in solution. The structure of the domain-swapped Y75A HasAypt dimer shows the presence of two low-spin heme molecules coordinated with His84 and His140, and displacement of the Arg40 loop of dimeric Y75A HasAypt results in deformation of the heme-binding pocket. A similar rearrangement of the distal heme loop might occur in heme transfer from HasAypt to HasRypt.

Using Molecular Dynamics Simulations as an Aid in the Prediction of Domain Swapping of Computationally Designed Protein Variants

In standard implementations of computational protein design, a positive-design approach is used to predict sequences that will be stable on a given backbone structure. Possible competing states are typically not considered, primarily because appropriate structural models are not available. One potential competing state, the domain-swapped dimer, is especially compelling because it is often nearly identical with its monomeric counterpart, differing by just a few mutations in a hinge region. Molecular dynamics (MD) simulations provide a computational method to sample different conformational states of a structure. Here, we tested whether MD simulations could be used as a post-design screening tool to identify sequence mutations leading to domain-swapped dimers. We hypothesized that a successful computationally designed sequence would have backbone structure and dynamics characteristics similar to that of the input structure and that, in contrast, domain-swapped dimers would exhibit increased backbone flexibility and/or altered structure in the hinge-loop region to accommodate the large conformational change required for domain swapping. While attempting to engineer a homodimer from a 51-amino-acid fragment of the monomeric protein engrailed homeodomain (ENH), we had instead generated a domain-swapped dimer (ENH_DsD). MD simulations on these proteins showed increased B-factors derived from MD simulation in the hinge loop of the ENH_DsD domain-swapped dimer relative to monomeric ENH. Two point mutants of ENH_DsD designed to recover the monomeric fold were then tested with an MD simulation protocol. The MD simulations suggested that one of these mutants would adopt the target monomeric structure, which was subsequently confirmed by X-ray crystallography.

Two independently folding units of Plasmodium profilin suggest evolution via gene fusion.

Gene fusion is a common mechanism of protein evolution that has mainly been discussed in the context of multidomain or symmetric proteins. Less is known about fusion of ancestral genes to produce small single-domain proteins. Here, we show with a domain-swapped mutant Plasmodium profilin that this small, globular, apparently single-domain protein consists of two foldons. The separation of binding sites for different protein ligands in the two halves suggests evolution via an ancient gene fusion event, analogous to the formation of multidomain proteins. Finally, the two fragments can be assembled together after expression as two separate gene products. The possibility to engineer both domain-swapped dimers and half-profilins that can be assembled back to a full profilin provides perspectives for engineering of novel protein folds, e.g., with different scaffolding functions.

Limited Proteolysis Reveals That Amyloids from the 3D Domain-Swapping Cystatin B Have a Non-Native β-Sheet Topology

3D domain-swapping proteins form multimers by unfolding and then sharing of secondary structure elements, often with native-like interactions. Runaway domain swapping is proposed as a mechanism for folded proteins to form amyloid fibres, with examples including serpins and cystatins. Cystatin C amyloids cause a hereditary form of cerebral amyloid angiopathy whilst cystatin B aggregates are found in cases of Unverricht-Lundborg Syndrome, a progressive form of myoclonic epilepsy. Under conditions that favour fibrillisation, cystatins populate stable 3D domain-swapped dimers both in vitro and in vivo that represent intermediates on route to the formation of fibrils. Previous work on cystatin B amyloid fibrils revealed that the α-helical region of the protein becomes disordered and identified the conservation of a continuous 20-residue elongated β-strand (residues 39–58), the latter being a salient feature of the dimeric 3D domain-swapped structure. Here we apply limited proteolysis to cystatin B amyloid fibrils and show that not only the α-helical N-terminal of the protein (residues 1–35) but also the C-terminal of the protein (residues 80–98) can be removed without disturbing the underlying fibril structure. This observation is incompatible with previous models of cystatin amyloid fibrils where the β-sheet is assumed to retain its native antiparallel arrangement. We conclude that our data favour a more generic, at least partially parallel, arrangement for cystatin β-sheet structure in mature amyloids and propose a model that remains consistent with available data for amyloids from either cystatin B or cystatin C.

Domain-Swapped Dimer of Pseudomonas aeruginosa Cytochrome c551: Structural Insights into Domain Swapping of Cytochrome c Family Proteins

Cytochrome c (cyt c) family proteins, such as horse cyt c, Pseudomonas aeruginosa cytochrome c 551 (PA cyt c 551), and Hydrogenobacter thermophilus cytochrome c 552 (HT cyt c 552), have been used as model proteins to study the relationship between the protein structure and folding process. We have shown in the past that horse cyt c forms oligomers by domain swapping its C-terminal helix, perturbing the Met–heme coordination significantly compared to the monomer. HT cyt c 552 forms dimers by domain swapping the region containing the N-terminal α-helix and heme, where the heme axial His and Met ligands belong to different protomers. Herein, we show that PA cyt c 551 also forms domain-swapped dimers by swapping the region containing the N-terminal α-helix and heme. The secondary structures of the M61A mutant of PA cyt c 551 were perturbed slightly and its oligomer formation ability decreased compared to that of the wild-type protein, showing that the stability of the protein secondary structures is important for domain swapping. The hinge loop of domain swapping for cyt c family proteins corresponded to the unstable region specified by hydrogen exchange NMR measurements for the monomer, although the swapping region differed among proteins. These results show that the unstable loop region has a tendency to become a hinge loop in domain-swapped proteins.

Insights into Herpesvirus Tegument Organization from Structural Analyses of the 970 Central Residues of HSV-1 UL36 Protein

The tegument of all herpesviruses contains a capsid-bound large protein that is essential for multiple viral processes, including capsid transport, decapsidation at the nuclear pore complex, particle assembly, and secondary envelopment, through mechanisms that are still incompletely understood. We report here a structural characterization of the central 970 residues of this protein for herpes simplex virus type 1 (HSV-1 UL36, 3164 residues). This large fragment is essentially a 34-nm-long monomeric fiber. The crystal structure of its C terminus shows an elongated domain-swapped dimer. Modeling and molecular dynamics simulations give a likely molecular organization for the monomeric form and extend our findings to alphaherpesvirinae. Hence, we propose that an essential feature of UL36 is the existence in its central region of a stalk capable of connecting capsid and membrane across the tegument and that the ability to switch between monomeric and dimeric forms may help UL36 fulfill its multiple functions.

A transcription blocker isolated from a designed repeat protein combinatorial library by in vivo functional screen

A highly diverse DNA library coding for ankyrin seven-repeat proteins (ANK-N5C) was designed and constructed by a PCR-based combinatorial assembly strategy. A bacterial melibiose fermentation assay was adapted for in vivo functional screen. We isolated a transcription blocker that completely inhibits the melibiose-dependent expression of α-galactosidase (MelA) and melibiose permease (MelB) of Escherichia coli by specifically preventing activation of the melAB operon. High-resolution crystal structural determination reveals that the designed ANK-N5C protein has a typical ankyrin fold, and the specific transcription blocker, ANK-N5C-281, forms a domain-swapped dimer. Functional tests suggest that the activity of MelR, a DNA-binding transcription activator and a member of AraC family of transcription factors, is inhibited by ANK-N5C-281 protein. All ANK-N5C proteins are expected to have a concave binding area with negative surface potential, suggesting that the designed ANK-N5C library proteins may facilitate the discovery of binders recognizing structural motifs with positive surface potential, like in DNA-binding proteins. Overall, our results show that the established library is a useful tool for the discovery of novel bioactive reagents.

The principal mRNA nuclear export factor NXF1:NXT1 forms a symmetric binding platform that facilitates export of retroviral CTE-RNA.

The NXF1:NXT1 complex (also known as TAP:p15) is a general mRNA nuclear export factor that is conserved from yeast to humans. NXF1 is a modular protein constructed from four domains (RRM, LRR, NTF2-like and UBA domains). It is currently unclear how NXF1:NXT1 binds transcripts and whether there is higher organization of the NXF1 domains. We report here the 3.4 Å resolution crystal structure of the first three domains of human NXF1 together with NXT1 that has two copies of the complex in the asymmetric unit arranged to form an intimate domain-swapped dimer. In this dimer, the linkers between the NXF1 LRR and NTF2-like domains interact with NXT1, generating a 2-fold symmetric platform in which the RNA-binding RRM, LRR and NTF2-like domains are arranged on one face. In addition to bulk transcripts, NXF1:NXT1 also facilitates the export of unspliced retroviral genomic RNA from simple type-D retroviruses such as SRV-1 that contain a constitutive transport element (CTE), a cis-acting 2-fold symmetric RNA stem–loop motif. Complementary structural, biochemical and cellular techniques indicated that the formation of a symmetric RNA binding platform generated by dimerization of NXF1:NXT1 facilitates the recognition of CTE-RNA and promotes its nuclear export.

Carbon monoxide binding properties of domain-swapped dimeric myoglobin.

Myoglobin (Mb) is a monomeric oxygen storage hemoprotein, and has been shown to form a domain-swapped dimer. In this study, monomeric and dimeric carbon monoxide (CO)-bound Mb (MbCO) exhibited similar absorption spectra. The CO stretching frequencies of MbCO were observed at 1,932 and 1,944 cm(-1) for both monomeric and dimeric MbCO. The resonance Raman (RR) bands for the stretching between the heme iron and axial ligands were observed at the same frequencies for the monomer and dimer of deoxygenated Mb (deoxyMb) and MbCO, respectively (ν Fe-His, 220 cm(-1); ν Fe-C, 507 cm(-1)), showing that the Fe-His bond strength of deoxyMb and the Fe-CO bond strength of MbCO did not change by the dimerization. Time-resolved RR measurements showed that the dynamics of the structural changes at the heme active site after CO photo-dissociation of MbCO was similar between monomeric and dimeric Mb [monomer, (5.2 ± 1.8) × 10(6) s(-1); dimer, (6.2 ± 1.1) × 10(6) s(-1) at room temperature]. These results show that the heme coordination structure, the protein environment around the bound CO, and the protein relaxation character are similar between monomeric and dimeric MbCO. Although the active site structure was similar between the monomer and dimer, the CO binding rate constant of dimeric Mb [(1.01 ± 0.03) × 10(6) M(-1) s(-1) at 20 °C] was about twice larger than that of the monomer [(0.52 ± 0.02) × 10(6) M(-1) s(-1) at 20 °C], presumably due to the expansion of the channel between the Xe3 cavity and the solvent by the dimerization.

DNA binding by FOXP3 domain-swapped dimer suggests mechanisms of long-range chromosomal interactions.

FOXP3 is a lineage-specific transcription factor that is required for regulatory T cell development and function. In this study, we determined the crystal structure of the FOXP3 forkhead domain bound to DNA. The structure reveals that FOXP3 can form a stable domain-swapped dimer to bridge DNA in the absence of cofactors, suggesting that FOXP3 may play a role in long-range gene interactions. To test this hypothesis, we used circular chromosome conformation capture coupled with high throughput sequencing (4C-seq) to analyze FOXP3-dependent genomic contacts around a known FOXP3-bound locus, Ptpn22. Our studies reveal that FOXP3 induces significant changes in the chromatin contacts between the Ptpn22 locus and other Foxp3-regulated genes, reflecting a mechanism by which FOXP3 reorganizes the genome architecture to coordinate the expression of its target genes. Our results suggest that FOXP3 mediates long-range chromatin interactions as part of its mechanisms to regulate specific gene expression in regulatory T cells.

Small-Angle X-Ray Scattering and Biochemical Studies of an Intramolecular Tandem Coiled Coil

Coiled coil has served as an excellent model system for studying protein folding and developing protein-based biomaterials. Most designed coiled coils function as oligomers, namely intermolecular coiled coils. However, less is known about structural and biochemical behavior of intramolecular coiled coils where coiled coil motifs are covalently linked in one polypeptide. Here we prepare a protein which harbors three coiled coil motives with short linkers, termed tandem coiled coil (TCC) and characterize its structural and biochemical behavior in solution. TCC consists of three coiled coil motives whose sequences are derived from Coil-Ser and its domain swapped dimer (DSD). Modifications include positioning E (Glu) residue at “e” and K (Lys) at “g” throughout heptad repeats to enhance ionic interaction among its constituent coiled coil motives. The linkers are four-residue-long with sequence G[S/T]GG to ensure flexibility. Molecular modeling of TCC suggested a compact triple helical bundle structure with the second and the third coiled coil motives forming a canonical coiled coil. TCC exists as a mixture of monomeric and dimeric species in solution. Small-angle X-ray scattering (SAXS) revealed ellipsoidal molecular envelopes for both dimeric and monomeric TCC in solution. The theoretically modeled structures of TCC docked well into the envelopes of both species. Higher ionic strength shifted the equilibrium into monomer with apparently more compact structure. Secondary structure of TCC at various ionic strengths remains unchanged probed by circular dichroism. Taken together, our results suggest that our designed TCC is predominantly monomeric structure through the enhanced ionic interactions, and it is affected by the concentration of ionic species in the buffer.

Domain-swapped cytochrome cb562 dimer and its nanocage encapsulating a Zn-SO4 cluster in the internal cavity.

Protein nanostructures have been gaining in interest, along with developments in new methods for construction of novel nanostructures. We have previously shown that c-type cytochromes and myoglobin form oligomers by domain swapping. Herein, we show that a four-helix bundle protein cyt cb562, with the cyt b562 heme attached to the protein moiety by two Cys residues insertion, forms a domain-swapped dimer. Dimeric cyt cb562 did not dissociate to monomers at 4 °C, whereas dimeric cyt b562 dissociated under the same conditions, showing that heme attachment to the protein moiety stabilizes the domain-swapped structure. According to X-ray crystallographic analysis of dimeric cyt cb562, the two helices in the N-terminal region of one protomer interacted with the other two helices in the C-terminal region of the other protomer, where Lys51-Asp54 served as a hinge loop. The heme coordination structure of the dimer was similar to that of the monomer. In the crystal, three domain-swapped cyt cb562 dimers formed a unique cage structure with a Zn-SO4 cluster inside the cavity. The Zn-SO4 cluster consisted of fifteen Zn2+ and seven SO42- ions, whereas six additional Zn2+ ions were detected inside the cavity. The cage structure was stabilized by coordination of the amino acid side chains of the dimers to the Zn2+ ions and connection of two four-helix bundle units through the conformation-adjustable hinge loop. These results show that domain swapping can be applied in the construction of unique protein nanostructures.