Domain-swapped Dimer Research Articles

Experimental and theoretical study on converting myoglobin into a stable domain-swapped dimer by utilizing a tight hydrogen bond network at the hinge region.

Various factors, such as helical propensity and hydrogen bonds, control protein structures. A frequently used model protein, myoglobin (Mb), can perform 3D domain swapping, in which the loop at the hinge region is converted to a helical structure in the dimer. We have previously succeeded in obtaining monomer–dimer equilibrium in the native state by introducing a high α-helical propensity residue, Ala, to the hinge region. In this study, we focused on another factor that governs the protein structure, hydrogen bonding. X-ray crystal structures and thermodynamic studies showed that the myoglobin dimer was stabilized over the monomer when keeping His82 to interact with Lys79 and Asp141 through water moleclues and mutating Leu137, which was located close to the H-bond network at the dimer hinge region, to a hydrophilic amino acid (Glu or Asp). Molecular dynamics simulation studies confirmed that the number of H-bonds increased and the α-helices at the hinge region became more rigid for mutants with a tighter H-bond network, supporting the hypothesis that the myoglobin dimer is stabilized when the H-bond network at the hinge region is enhanced. This demonstrates the importance and utility of hydrogen bonds for designing a protein dimer from its monomer with 3D domain swapping.

The Molecular Mechanism of Domain Swapping of the C-Terminal Domain of the SARS-Coronavirus Main Protease

In three-dimensional domain swapping, two protein monomers exchange a part of their structures to form an intertwined homodimer, whose subunits resemble the monomer. Several viral proteins domain swap to increase their structural complexity or functional avidity. The main protease (Mpro) of the severe acute respiratory syndrome (SARS) coronavirus proteolyzes viral polyproteins and has been a target for anti-SARS drug design. Domain swapping in the α-helical C-terminal domain of Mpro (MproC) locks Mpro into a hyperactive octameric form that is hypothesized to promote the early stages of viral replication. However, in the absence of a complete molecular understanding of the mechanism of domain swapping, investigations into the biological relevance of this octameric Mpro have stalled. Isolated MproC can exist as a monomer or a domain-swapped dimer. Here, we investigate the mechanism of domain swapping of MproC using coarse-grained structure-based models and molecular dynamics simulations. Our simulations recapitulate several experimental features of MproC folding. Further, we find that a contact between a tryptophan in the MproC domain-swapping hinge and an arginine elsewhere forms early during folding, modulates the folding route, and promotes domain swapping to the native structure. An examination of the sequence and the structure of the tryptophan containing hinge loop shows that it has a propensity to form multiple secondary structures and contacts, indicating that it could be stabilized into either the monomer- or dimer-promoting conformations by mutations or ligand binding. Finally, because all residues in the tryptophan loop are identical in SARS-CoV and SARS-CoV-2, mutations that modulate domain swapping may provide insights into the role of octameric Mpro in the early-stage viral replication of both viruses.

Crystal Structure of a Bivalent Antibody Fab Fragment

We determined the crystal structure to 1.8 Å resolution of the Fab fragment of an affinity-matured human monoclonal antibody (HC84.26.5D) that recognizes the E2 envelope glycoprotein of hepatitis C virus (HCV). Unlike conventional Fabs, which are monovalent monomers, Fab HC84.26.5D assembles into a bivalent domain-swapped dimer in which the two VL/VH modules are separated by ~25 Å. In solution, Fab HC84.26.5D exists predominantly as a dimer (~80%) in equilibrium with the monomeric form of the Fab (~20%). Dimerization is mediated entirely by deletion of a single residue, VHSer113 (Kabat numbering), in the elbow region linking the VH and CH1 domains. In agreement with the crystal structure, dimeric Fab HC84.26.5D is able to bind two HCV E2 molecules in solution. This is only the second example of a domain-swapped Fab dimer from among >3000 Fab crystal structures determined to date. Moreover, the architecture of the doughnut-shaped Fab HC84.26.5D dimer is completely different from that of the previously reported Fab 2G12 dimer. We demonstrate that the highly identifiable shape of dimeric Fab HC84.26.5D makes it useful as a fiducial marker for single-particle cryoEM analysis of HCV E2. Bivalent domain-swapped Fab dimers engineered on the basis of HC84.26.5D may also serve as a means of doubling the effective size of conventional Fab–protein complexes for cryoEM.

Crystal structure and physicochemical characterization of a phytocystatin from Humulus lupulus: Insights into its domain-swapped dimer

Phytocystatins are a family of plant cysteine-protease inhibitors of great interest due to their biotechnological application in culture improvement. It was shown that their expression in plants increases resistance to herbivory by insects and improves tolerance to both biotic and abiotic stress factors. In this work, owing to the economical relevance of the source organism, a phytocystatin from hop (Humulus lupulus), Hop1, was produced by heterologous expression in E. coli Lemo21 (DE3) cultivated in auto-inducing ZYM-5052 medium and purified by immobilized metal ion affinity and size exclusion chromatography. Thermal denaturation assays by circular dichroism showed that Hop1 exhibited high melting temperatures ranging from 82 °C to 85 °C and high thermal stability at a wide pH range, with ΔG25's higher than 12 kcal/mol. At 20 °C and pH 7.6, the dimeric conformation of the protein is favored according to size exclusion chromatography and analytical ultracentrifugation data, although monomers and higher order oligomers could still be detected in a lesser extent. The crystal structure of Hop1 was solved in the space groups P 2 21 21 and C 2 2 21 at resolutions of 1.80 Å and 1.68 Å, respectively. In both models, Hop1 is folded as a domain-swapped dimer where the first inhibitory loop undergoes a significant structural change and interacts with their equivalent from the other monomer forming a long antiparallel beta strand, leading to loss of inhibitory activity.

A WW Tandem-Mediated Dimerization Mode of SAV1 Essential for Hippo Signaling

SUMMARYThe canonical mammalian Hippo pathway contains a core kinase signaling cascade requiring upstream MST to form a stable complex with SAV1 in order to phosphorylate the downstream LATS/MOB complex. Though SAV1 dimerization is essential for the trans-activation of MST, the molecular mechanism underlying SAV1 dimerization is unclear. Here, we discover that the SAV1 WW tandem containing a short Pro-rich extension immediately following the WW tandem (termed as “WW12ex”) forms a highly stable homodimer. The crystal structure of SAV1 WW12ex reveals that the Pro-rich extension of one subunit binds to both WW domains from the other subunit. Thus, SAV1 WW12ex forms a domain-swapped dimer instead of a WW2 homodimerization-mediated dimer. The WW12ex-mediated dimerization of SAV1 is required for the MST/SAV1 complex assembly and MST kinase activation. Finally, we show that several cancer-related SAV1 variants disrupt SAV1 dimer formation, and thus, these mutations may impair the tumor-suppression activity of SAV1.

Structure and assembly of ESCRT-III helical Vps24 filaments.

ESCRT-III proteins mediate a range of cellular membrane remodeling activities such as multivesicular body biogenesis, cytokinesis, and viral release. Critical to these processes is the assembly of ESCRT-III subunits into polymeric structures. In this study, we determined the cryo-EM structure of a helical assembly of Saccharomyces cerevisiae Vps24 at 3.2-Å resolution and found that Vps24 adopts an elongated open conformation. Vps24 forms a domain-swapped dimer extended into protofilaments that associate into a double-stranded apolar filament. We demonstrate that, upon binding negatively charged lipids, Vps24 homopolymer filaments undergo partial disassembly into shorter filament fragments and oligomers. Upon the addition of Vps24, Vps2, and Snf7, liposomes are deformed into neck and tubular structures by an ESCRT-III heteropolymer coat. The filamentous Vps24 homopolymer assembly structure and interaction studies reveal how Vps24 could introduce unique geometric properties to mixed-type ESCRT-III heteropolymers and contribute to the process of membrane scission events.

How Does HIV Env Structure Informs Vaccine Design?

BackgroundThe DHVI Division of Structural Biology seeks to use atomic level structural information for design of an effective HIV-1 vaccine. Through visualization of the HIV-1 envelope (Env) and its interactions with the human immune system, we obtain structural information that we translate into the rational development vaccine immunogensMethodsWe use negative stain electron microscopy (NSEM), cryo-electron microscopy (cryo-EM), and x-ray crystallography as the major structural techniques for visualization of HIV-1 Env, and combine these with biochemical and biophysical studies, as well as computational methods to obtain a basic understanding of the functions and interactions of the HIV-1 Env.Results:1.The DHVI NSEM pipeline runs on a daily basis to quality control vaccine immunogens for animal studies and other applications. Offering rapid sample turnover and economical operations, the NSEM pipeline is the most widely utilized resource of the DHVI Division of Structural Biology. Over the last year, the NSEM team has focused efforts on improving operational speed and data processing allowing high-quality visualization of a large variety of samples including HIV-1 Env immunogens, antibodies, nanoparticles, and VLPs. In the last year we have also expanded our NSEM studies to the analyses of serum samples and mucosal fluids.2.To understand the mechanism of HIV-1 entry we have determined structures of HIV-1 entry intermediates. We have determined a 3.8 Å resolution structure of a single CD4 bound to a closed HIV-1 Env trimer revealing new contacts of CD4 with Env. We have also structurally characterized an Env designed to prevent CD4-induced rearrangements by targeted disruption of an allosteric network modulating Env conformational changes.3.We have structurally characterized the HIV-1 glycan-V3 targeting DH270 Broadly Neutralizing Antibody Lineage. The structures revealed movements in the V1 loop and interactive glycans, shifts in antibody orientations, antibody VH-VL orientations, and antibody elbow angles, as the lineage progressed to maturation.4.We have solved a structure in complex with the HIV-1 Env immunogen Man5-enriched CH505.N279K.G458Y.SOSIP.664 of the unmutated common ancestor (UCA) of the HIV-1 CD4-binding site targeting CH235 Broadly Neutralizing Antibody Lineage. The structure revealed interactions of the N279K and G458Y mutations with the CDR L3 loop of CH235 UCA thus providing a structural understanding of the role of these mutations in facilitating binding to the CH235 UCA. (see also Henderson et al abstract)5.Using NSEM and cryo-EM we have characterized the structural properties of a novel class of 2G12-mimetic, yet non domain-swapped Fab dimer glycan-reactive (FDG) antibodies. These studies showed that the Fab-dimerized 2G12-like motif is more common than previously thought, and that creation of a Fab-dimerized paratope for an HIV-1 neutralizing antibody does not require VH domain-swapping.6.Finally, the structural team is an integral part of the CHAVD Kalma Immunogen Design Team, wherein we are defining the structural basis of bnAb affinity maturation to guide sequential immunogen design.Conclusions:These results highlight the power of structural information on HIV-1 vaccine design, from leveraging a basic understanding of HIV-1 entry mechanism for immunogen design, to rapid visualization of Env immunogens by NSEM for quality control, discovery of novel antibody interactions, and atomic level visualization of antibody/Env interactions.

Intrinsically Disordered Regions of the DNA-Binding Domain of Human FoxP1 Facilitate Domain Swapping

Forkhead box P (FoxP) proteins are unique transcription factors that spatiotemporally regulate gene expression by tethering two chromosome loci together via functional domain-swapped dimers formed through their DNA-binding domains. Further, the differential kinetics on this dimerization mechanism underlie an intricate gene regulation network at physiological conditions. Nonetheless, poor understanding of the structural dynamics and steps of the association process impedes to link the functional domain swapping to human-associated diseases. Here, we have characterized the DNA-binding domain of human FoxP1 by integrating single-molecule Förster resonance energy transfer and hydrogen–deuterium exchange mass spectrometry data with molecular dynamics simulations. Our results confirm the formation of a previously postulated domain-swapped (DS) FoxP1 dimer in solution and reveal the presence of highly populated, heterogeneous, and locally disordered dimeric intermediates along the dimer dissociation pathway. The unique features of FoxP1 provide a glimpse of how intrinsically disordered regions can facilitate domain swapping oligomerization and other tightly regulated association mechanisms relevant in biological processes.

Structural Insights into RNA Dimerization: Motifs, Interfaces and Functions.

In comparison with the pervasive use of protein dimers and multimers in all domains of life, functional RNA oligomers have so far rarely been observed in nature. Their diminished occurrence contrasts starkly with the robust intrinsic potential of RNA to multimerize through long-range base-pairing (“kissing”) interactions, self-annealing of palindromic or complementary sequences, and stable tertiary contact motifs, such as the GNRA tetraloop-receptors. To explore the general mechanics of RNA dimerization, we performed a meta-analysis of a collection of exemplary RNA homodimer structures consisting of viral genomic elements, ribozymes, riboswitches, etc., encompassing both functional and fortuitous dimers. Globally, we found that domain-swapped dimers and antiparallel, head-to-tail arrangements are predominant architectural themes. Locally, we observed that the same structural motifs, interfaces and forces that enable tertiary RNA folding also drive their higher-order assemblies. These feature prominently long-range kissing loops, pseudoknots, reciprocal base intercalations and A-minor interactions. We postulate that the scarcity of functional RNA multimers and limited diversity in multimerization motifs may reflect evolutionary constraints imposed by host antiviral immune surveillance and stress sensing. A deepening mechanistic understanding of RNA multimerization is expected to facilitate investigations into RNA and RNP assemblies, condensates, and granules and enable their potential therapeutical targeting.

The Human Cytochrome c Domain-Swapped Dimer Facilitates Tight Regulation of Intrinsic Apoptosis.

Oxidation of cardiolipin (CL) by cytochrome c (cytc) has been proposed to initiate the intrinsic pathway of apoptosis. Domain-swapped dimer (DSD) conformations of cytc have been reported both by our laboratory and by others. The DSD is an alternate conformer of cytc that could oxygenate CL early in apoptosis. We demonstrate here that the cytc DSD has a set of properties that would provide tighter regulation of the intrinsic pathway. We show that the human DSD is kinetically more stable than horse and yeast DSDs. Circular dichroism data indicate that the DSD has a less asymmetric heme environment, similar to that seen when the monomeric protein binds to CL vesicles at high lipid:protein ratios. The dimer undergoes the alkaline conformational transition near pH 7.0, 2.5 pH units lower than that of the monomer. Data from fluorescence correlation spectroscopy and fluorescence anisotropy suggest that the alkaline transition of the DSD may act as a switch from a high affinity for CL nanodiscs at pH 7.4 to a much lower affinity at pH 8.0. Additionally, the peroxidase activity of the human DSD increases 7-fold compared to that of the monomer at pH 7 and 8, but by 14-fold at pH 6 when mixed Met80/H2O ligation replaces the lysine ligation of the alkaline state. We also present data that indicate that cytc binding shows a cooperative effect as the concentration of cytc is increased. The DSD appears to have evolved into a pH-inducible switch that provides a means to control activation of apoptosis near pH 7.0.

Thermodynamic Control of Domain Swapping by Modulating the Helical Propensity in the Hinge Region of Myoglobin.

Domain swapping is an exception to Anfinsen's dogma, and more than one structure can be produced from the same amino acid sequence by domain swapping. We have previously shown that myoglobin (Mb) can form a domain-swapped dimer in which the hinge region is converted to a helical structure. In this study, we showed that domain-swapped dimerization of Mb was achieved by a single Ala mutation of Gly at position 80. Multiple Ala mutations at positions 81 and 82 in addition to position 80 facilitated dimerization of Mb by stabilization of the dimeric states. Domain swapping tendencies correlated well with the helical propensity of the mutated residue in a series of Mb mutants with amino acids introduced to the hinge region. These findings demonstrate that a single mutation in the hinge loop to modify helical propensity can control oligomer formation, providing new ideas to create high-order protein oligomers using domain swapping.

STING Activation and its Role in IFN Production

The immune system’s ability to respond to foreign DNA is a highly conserved mechanism. One crucial part of this mechanism is Stimulator of Interferon Genes (STING), a central innate immune protein located in the endoplasmic reticulum. It is a pattern recognition receptor that is activated in response to intracellular infection and, ultimately, mediates type 1 interferon (IFN) production. Encoded by the gene TMEM173, STING is expressed in T‐cells, monocytes, natural killer cells, and dermal fibroblasts.. It is composed of four transmembrane helices and a cytoplasmic ligand binding and signaling domain, which form a domain‐swapped dimer assembly. The STING pathway is initiated when double‐stranded DNA (dsDNA) is sensed, causing cyclic‐GMP‐AMP‐synthase (cGAS) to cyclize GTP and ATP and produce 2′3′‐cyclic‐GMP‐AMP (cGAMP), the main ligand that activates STING. Upon STING activation, the ligand‐binding domain closes, inducing a 180 degree rotation of the ligand‐binding domain relative to the transmembrane domain. The C‐terminal tail of STING has been found to autoinhibit the protein by blocking the polymerization interface of inactive STING, preventing auto activation. The conformational change made in response to cGAMP releases the CTT, exposing the polymer interface and allowing disulfide link formation. Alternatively, STING can be activated by bacterial cyclic‐di‐GMP in a cooperative manner, with cyclic‐di‐GMP serving as a partial antagonist of the cGAMP signaling pathway. Structural and biochemical studies have provided elegant insight into the mechanism of differential of STING by cGAMP and cDi‐GMP. STING activates tank binding kinase 1 (TBK1) which phosphorylates transcription factor IRF‐3 and causes it to translocate to the nucleus. Gain‐of‐function mutations of TMEM173 causing elevated transcription of IFNs have been proven to cause autoimmune syndromes such as systemic lupus erythematosus and, most recently, three mutations of TMEM173 have been found to directly cause STING‐associated vasculopathy with onset in infants (SAVI). New research proposes a therapeutic strategy that uses molecules that induces a different STING conformation than cGAMP‐bound STING as a STING inhibitor. This method would prevent constitutive STING activation in autoimmune syndromes while being less immunosuppressive than previously proposed therapies involving STING inhibition. The Walton High School MSOE Center for Biomolecular Modeling SMART Team has designed a 3‐D model of STING using a recently published cryo‐electron microscopy structure that reveals the transmembrane domain structure to further investigate and examine the structure‐function relationship of STING.Support or Funding InformationMSOE Center for Biomolecular Modeling

The crystal structure of the heme d1 biosynthesis-associated small c-type cytochrome NirC reveals mixed oligomeric states in crystallo.

Monoheme c-type cytochromes are important electron transporters in all domains of life. They possess a common fold hallmarked by three α-helices that surround a covalently attached heme. An intriguing feature of many monoheme c-type cytochromes is their capacity to form oligomers by exchanging at least one of their α-helices, which is often referred to as 3D domain swapping. Here, the crystal structure of NirC, a c-type cytochrome co-encoded with other proteins involved in nitrite reduction by the opportunistic pathogen Pseudomonas aeruginosa, has been determined. The crystals diffracted anisotropically to a maximum resolution of 2.12 Å (spherical resolution of 2.83 Å) and initial phases were obtained by Fe-SAD phasing, revealing the presence of 11 NirC chains in the asymmetric unit. Surprisingly, these protomers arrange into one monomer and two different types of 3D domain-swapped dimers, one of which shows pronounced asymmetry. While the simultaneous observation of monomers and dimers probably reflects the interplay between the high protein concentration required for crystallization and the structural plasticity of monoheme c-type cytochromes, the identification of conserved structural motifs in the monomer together with a comparison with similar proteins may offer new leads to unravel the unknown function of NirC.

3D domain swapping in the TIM barrel of the α subunit of Streptococcus pneumoniae tryptophan synthase.

Tryptophan synthase catalyzes the last two steps of tryptophan biosynthesis in plants, fungi and bacteria. It consists of two protein chains, designated α and β, encoded by trpA and trpB genes, that function as an αββα complex. Structural and functional features of tryptophan synthase have been extensively studied, explaining the roles of individual residues in the two active sites in catalysis and allosteric regulation. TrpA serves as a model for protein-folding studies. In 1969, Jackson and Yanofsky observed that the typically monomeric TrpA forms a small population of dimers. Dimerization was postulated to take place through an exchange of structural elements of the monomeric chains, a phenomenon later termed 3D domain swapping. The structural details of the TrpA dimer have remained unknown. Here, the crystal structure of the Streptococcus pneumoniae TrpA homodimer is reported, demonstrating 3D domain swapping in a TIM-barrel fold for the first time. The N-terminal domain comprising the H0-S1-H1-S2 elements is exchanged, while the hinge region corresponds to loop L2 linking strand S2 to helix H2'. The structural elements S2 and L2 carry the catalytic residues Glu52 and Asp63. As the S2 element is part of the swapped domain, the architecture of the catalytic apparatus in the dimer is recreated from two protein chains. The homodimer interface overlaps with the α-β interface of the tryptophan synthase αββα heterotetramer, suggesting that the 3D domain-swapped dimer cannot form a complex with the β subunit. In the crystal, the dimers assemble into a decamer comprising two pentameric rings.

Enthalpically-driven ligand recognition and cavity solvation of bovine odorant binding protein

Lipocalins are a widely distributed family of extracellular proteins typically involved in the transport of small hydrophobic molecules. To gain new insights into the molecular basis that governs ligand recognition by this ancient protein family, the binding properties of the domain-swapped dimer bovine odorant binding protein (bOBP) and its monomeric mutant bOBP121G+ were characterized using calorimetric techniques and molecular dynamics simulations. Thermal unfolding profiles revealed that the isolated bOBP subunits behave as a cooperative folding unit. In addition, bOBP and bOBP121G+ exhibited similar ligand binding properties, characterized by a non-classical hydrophobic effect signature. The energetic differences in the binding of bOBP to 1-hexen-3-ol and the physiological ligand 1-octen-3-ol were strikingly larger than those observed for the interaction of other lipocalins with congeneric ligands. MD simulations revealed that the recurrent opening of transient pores in the submicrosecond timescale allows a profuse exchange of water molecules between the protein interior and the surrounding solvent. This picture contrasts with other lipocalins whose ligand-free binding cavities are devoid of solvent molecules. Furthermore, the simulations indicated that internal water molecules solvate the protein cavity suboptimally, forming fewer hydrogen bonds and having lower density and higher potential energy than bulk water molecules. Upon ligand occupation, water molecules were displaced from the binding cavity in an amount that depended on the ligand size. Taken together, calorimetric and MD-simulation results are consistent with a significant contribution of cavity desolvation to the enthalpically-driven interaction of bOBP with its hydrophobic ligands.

Engineering the hCRBPII Domain-Swapped Dimer into a New Class of Protein Switches.

Protein conformational switches or allosteric proteins play a key role in the regulation of many essential biological pathways. Nonetheless, the implementation of protein conformational switches in protein design applications has proven challenging, with only a few known examples that are not derivatives of naturally occurring allosteric systems. We have discovered that the domain-swapped (DS) dimer of hCRBPII undergoes a large and robust conformational change upon retinal binding, making it a potentially powerful template for the design of protein conformational switches. Atomic resolution structures of the apo- and holo-forms illuminate a simple, mechanical movement involving sterically driven torsion angle flipping of two residues that drive the motion. We further demonstrate that the conformational "readout" can be altered by addition of cross-domain disulfide bonds, also visualized at atomic resolution. Finally, as a proof of principle, we have created an allosteric metal binding site in the DS dimer, where ligand binding results in a reversible 5-fold loss of metal binding affinity. The high resolution structure of the metal-bound variant illustrates a well-formed metal binding site at the interface of the two domains of the DS dimer and confirms the design strategy for allosteric regulation.

Domain-Swapping Design by Polyproline Rod Insertion.

During domain swapping, proteins mutually interconvert structural elements to form a di-/oligomer. Engineering this process by design is important for creating a higher order protein assembly with minimal modification. Herein, a simple design strategy is shown for domain-swapping formation by loop deletion and insertion of a polyproline rod. Crystal structures revealed the formation of the domain-swapped dimers and polyproline portion formed a polyproline II (PPII) structure. Small-angle X-ray scattering demonstrated that an extended orientation of domain-swapped dimer was retained in solution. It is found that a multiple of three of inserting proline residue is favored for domain swapping because of the helical nature of PPII. The rigid nature of the polyproline rod enables precise control of the interdomain distance and orientation.

Molecular basis for metabolite channeling in a ring opening enzyme of the phenylacetate degradation pathway

Substrate channeling is a mechanism for the internal transfer of hydrophobic, unstable or toxic intermediates from the active site of one enzyme to another. Such transfer has previously been described to be mediated by a hydrophobic tunnel, the use of electrostatic highways or pivoting and by conformational changes. The enzyme PaaZ is used by many bacteria to degrade environmental pollutants. PaaZ is a bifunctional enzyme that catalyzes the ring opening of oxepin-CoA and converts it to 3-oxo-5,6-dehydrosuberyl-CoA. Here we report the structures of PaaZ determined by electron cryomicroscopy with and without bound ligands. The structures reveal that three domain-swapped dimers of the enzyme form a trilobed structure. A combination of small-angle X-ray scattering (SAXS), computational studies, mutagenesis and microbial growth experiments suggests that the key intermediate is transferred from one active site to the other by a mechanism of electrostatic pivoting of the CoA moiety, mediated by a set of conserved positively charged residues.

Protein surface charge effect on 3D domain swapping in cells for c-type cytochromes

Many c-type cytochromes (cyts) can form domain-swapped oligomers. The positively charged Hydrogenobacter thermophilus (HT) cytochrome (cyt) c552 forms domain-swapped oligomers during expression in the Escherichia coli (E. coli) expression system, but the factors influencing the oligomerization remain unrevealed. Here, we found that the dimer of the negatively charged Shewanella violacea (SV) cyt c5 exhibits a domain-swapped structure, in which the N-terminal helix is exchanged between protomers, similar to the structures of the HT cyt c552 and Pseudomonas aeruginosa (PA) cyt c551 domain-swapped dimers. Positively charged horse cyt c and HT cyt c552 domain swapped during expression in E. coli, whereas negatively charged PA cyt c551 and SV cyt c5 did not. Oligomers were formed during expression in E. coli for HT cyt c552 attached to either a co- or post-translational signal peptide for transportation through the cytoplasm membrane, but not for PA cyt c551 attached to either signal peptide. HT cyt c552 formed oligomers in E. coli in the presence and absence of rare codons. More oligomers were obtained from the in vitro folding of horse cyt c and HT cyt c552 by the addition of negatively charged liposomes during folding, whereas the amount of oligomers for the in vitro folding of PA cyt c551 and SV cyt c5 did not change significantly by the addition. These results indicate that the protein surface charge affects the oligomerization of c-type cyts in cells; positively charged c-type cyts assemble on a negatively charged membrane, inducing formation of domain-swapped oligomers during folding.

The ESCRT-III protein VPS24 forms double stranded filaments composed of domain-swapped dimers

The ESCRT-III protein VPS24 forms double stranded filaments composed of domain-swapped dimers