DNA Recovery Research Articles

Development of an automated flow chemistry affinity-based purification process for DNA-encoded chemistry

An automated flow chemistry platform for DNA-encoded library (DEL) technologies requires the integration of a purification process for DNA-tagged substrates. It facilitates the development of further DEL reactions, building block rehearsal, and library synthesis. Therefore, a recently developed, manual affinity-based batch purification process for DNA-tagged substrates based on dispersive solid-phase extraction (DSPE) was transferred to automated flow chemistry using tailored 3D-printed microfluidic devices and open-source lab automation equipment. The immobilization and purification steps use Watson–Crick base pairing for a compound-encoding single-stranded DNA, which allows for the thorough removal of impurities and contaminations by washing steps and operationally simple recovery of the purified DNA-encoded compounds. This work optimized the annealing step for flow incubation and DNA purification was accomplished by flow DSPE washing/elution steps. The manually performed batch affinity-based purification process was compared with the microfluidic process by determining qualitative and quantitative DNA recovery parameters. It aimed at comparing batch and flow purification processes with regard to DNA recovery and purity to benefit from the high potential for automation, precise process control, and higher information density of the microfluidic purification process for DNA-tagged substrates. Manual operations were minimized by applying an automation strategy to demonstrate the potential for integrating the microfluidic affinity-based purification process for DNA-tagged substrates into an automated DNA-encoded flow chemistry platform.Graphical

Evaluation of commercial kits for isolation and bisulfite conversion of circulating cell-free tumor DNA from blood

BackgroundDNA methylation biomarkers in circulating cell-free DNA (cfDNA) have great clinical potential for cancer management. Most methods for DNA methylation analysis require bisulfite conversion, causing DNA degradation and loss. This is particularly challenging for cfDNA, which is naturally fragmented and normally present in low amounts. The aim of the present study was to identify an optimal combination of cfDNA isolation and bisulfite conversion kits for downstream analysis of DNA methylation biomarkers in plasma.ResultsOf the five tested bisulfite conversion kits (EpiJET Bisulfite Conversion Kit, EpiTect Plus DNA Bisulfite Kit (EpiTect), EZ DNA Methylation-Direct Kit, Imprint DNA Modification Kit (Imprint) and Premium Bisulfite Kit), the highest and lowest DNA yield and recovery were achieved using the EpiTect kit and the Imprint kit, respectively, with more than double the amount of DNA for the EpiTect kit. Of the three tested cfDNA isolation kits (Maxwell RSC ccfDNA Plasma Kit, QIAamp Circulating Nucleic Acid Kit (CNA) and QIAamp MinElute ccfDNA Mini Kit), the CNA kit yielded around twice as much cfDNA compared to the two others kits, although with more high molecular weight DNA present. When comparing various combinations of cfDNA isolation kits and bisulfite conversion kits, the CNA kit and the EpiTect kit were identified as the best-performing combination, resulting in the highest yield of bisulfite converted cfDNA from normal plasma, as measured by droplet digital PCR (ddPCR). As a proof of principle, this kit combination was used to process plasma samples from 13 colorectal cancer patients for subsequent ddPCR methylation analysis of BCAT1 and IKZF1. Methylation of BCAT1 and/or IKZF1 was identified in 6/10 (60%) stage IV patients and 1/3 (33%) stage III patients.ConclusionsBased on a thorough evaluation of five bisulfite conversion kits and three cfDNA isolation kits, both individually and in combination, the CNA kit and the EpiTect kit were identified as the best-performing kit combination, with highest DNA yield and recovery across a range of DNA input amounts. The combination was successfully used for detection of clinically relevant DNA methylation biomarkers in plasma from cancer patients.

Performance of Different Cotton and Nylon Swabs on DNA Recovery and Storage

Touch DNA samples are routine yet challenging pieces of evidence that provide investigators with information that helps them solve crimes. However, this type of evidence can be easily lost if the correct collection method is not used. This problem could be overcome with an optimal method of collection that increases the amount of touch DNA collected from different types of surfaces. Better-quality touch DNA can increase the chances of getting a full genetic profile. This study was divided into two parts which aimed to assess whether the type of swab used on different surfaces will significantly increase DNA recovery, concentrations, and the DNA preservation during three different timeframes (24h, 1 month and 3 months). Two different cotton swabs and Nylon swabs were used to lift touch DNA on three different surfaces (glass, plastic and wood) to identify the most suitable method of collection across all three surfaces. A total of 72 samples were lifted (3 replicates from each swab on 3 different surfaces) from two different participants (Male and Female) which were left to dry for 14 days in room temperature prior to DNA extraction. DNA preservation of the swabs was observed while using three dilutions of blood sample which was prepared from one of the volunteers (1:1 – 1:10 – 1:20) where 10 uL of each dilution was pipetted onto the four types of swabs in three replicates (n=36) to observe the preservation over three different timeframes 24h storage, 1 Month and 3 Months with a total of 108 samples. The COPAN CLASSIQSwabsTM Dry swab showed an overall average result during the storage periods of 24h with (1:1) dilution by (2.694ng/μL), (1:10) dilution with (0.548ng/μL) and (1:20) dilution with (0.143ng/μL). Results for the period of 1 Month also showed an average of (1:1) dilution with (2.825ng/μL), (1:10) dilution with (0.361ng/μL) and (1:20) dilution with (0.156ng/μL). These findings can be helpful for laboratories and crime scene investigators to optimize DNA sample collection and preservation based on their workflow.

Detecting human cytomegalovirus in urine, vagina and saliva: Impact of biological fluids and storage durations and temperatures on CMV DNA recovery.

Sample collection, transport and storage conditions vary in the human cytomegalovirus (CMV) shedding literature. Currently, limited data exist on the impact of biological fluids and pre-analytical sample handling on the detection of CMV DNA. To evaluate CMV DNA recovery from urine, vaginal fluid and saliva stored in different conditions, adult urine, vaginal and saliva fluids and swabs, stored with or without selected nucleic acid preservation media at various durations and temperatures, was compared by polymerase chain reaction (PCR) quantitation of spiked samples and self-collected urine (n = 45) and vaginal swabs (n = 58) from CMV seropositive pregnant women. There was a time-dependent reduction in CMV DNA recovery from urine, urine diluted in phosphate-buffered saline, and saliva stored at 2-8°C, but not from urine preserved in cobas® PCR transport media (CPM) (urine/CPM). For vaginal fluid, a reduction in recovery was evident after 7 days storage at 2-8°C. CMV DNA recovery over 91 days was similar between -80°C and -20°C storage for urine and vaginal swabs preserved in CPM, and saliva swabs preserved in eNAT® PCR transport media. A statistically significant change in CMV DNA recovery after 25 months storage (median) at -80°C was not observed for self-collected urine/CPM and vaginal swab/CPM from pregnant women. Taken together, recovery of CMV DNA is dependent on fluid type and storage conditions. To improve the validity and reliability of detection at different storage durations and temperatures, the use of nucleic acid preserving transport media at the point of collection for urine, vaginal fluid and saliva may be essential.

Histone H3 serine-57 is a CHK1 substrate whose phosphorylation affects DNA repair

Histone post-translational modifications promote a chromatin environment that controls transcription, DNA replication and repair, but surprisingly few phosphorylations have been documented. We report the discovery of histone H3 serine-57 phosphorylation (H3S57ph) and show that it is implicated in different DNA repair pathways from fungi to vertebrates. We identified CHK1 as a major human H3S57 kinase, and disrupting or constitutively mimicking H3S57ph had opposing effects on rate of recovery from replication stress, 53BP1 chromatin binding, and dependency on RAD52. In fission yeast, mutation of all H3 alleles to S57A abrogated DNA repair by both non-homologous end-joining and homologous recombination, while cells with phospho-mimicking S57D alleles were partly compromised for both repair pathways, presented aberrant Rad52 foci and were strongly sensitised to replication stress. Mechanistically, H3S57ph loosens DNA-histone contacts, increasing nucleosome mobility, and interacts with H3K56. Our results suggest that dynamic phosphorylation of H3S57 is required for DNA repair and recovery from replication stress, opening avenues for investigating the role of this modification in other DNA-related processes.

A spit in time: identification of saliva stains and assessment of total DNA recovery up to 180 days after deposition.

The main aim of this work was to validate the detection of saliva samples from denim, cotton, and polyester fabrics aged up to six months, applying rapid immunochromatographic tests resulting in the analysis of nuclear and mitochondrial DNA recovered. A comparison was also carried out between two saliva detection tests, Laboratory and Crime Scene. 50 μl saliva samples (three per time and test) were deposited on denim, cotton, and polyester fabrics. After 1, 3, 7, 14, 21, 30, 60, 90, 150, and 180 days of storage at room temperature, the samples were recovered by swabbing and detected by SERATEC® Amylase (Laboratory) test and SERATEC® SALIVA CS (Crime Scene) test (SERATEC®, Göttingen, Germany). DNA was isolated from the swab extraction buffer applying a silica-based methodology, and quantified based on fluorescent and human-specific quantifications. Then, it was submitted to STR profiling and mtDNA sequencing. According to our results, saliva stains up to six months after deposition remain valid specimens. The intensity of the bands varied among fabric type and time. Total DNA was successfully recovered from all tested samples, though with the limitations of obtaining partial nuclear DNA profiles from the oldest samples. In contrast, complete characterization of mtDNA was achieved from all samples. Lab and CS tests performed similar on the detection of saliva, as well as, DNA yield and profiling. Future research will be able to expand these results, analyzing the stability of other body fluids and the sensitivity of rapid immunochromatographic tests to detect them.

Development of a microfluidic photochemical flow reactor concept by rapid prototyping.

The transfer from batch to flow chemistry is often based on commercial microfluidic equipment, such as costly complete reactor systems, which cannot be easily tailored to specific requirements of technologies such as DNA-encoded library technology (DELT), in particular for increasingly important photochemical reactions. Customized photoreactor concepts using rapid prototyping technology offer a modular, flexible, and affordable design that allows for adaptation to various applications. In order to validate the prototype reactors, a photochemical pinacol coupling reaction at 368nm was conducted to demonstrate the transfer from batch to flow chemistry. The conversion rates were optimized by adapting the design parameters of the microfluidic flow photoreactor module. Subsequently, the photoreactor module has been extended to an application with DNA-tagged substrates by switching to LEDs with a wavelength of 454nm. The successful recovery of DNA confirmed the feasibility of the modular-designed flow photo reactor. This collaborative approach holds enormous potential to drive the development of DELT and flow equipment design.

Library preparation method and DNA source influence endogenous DNA recovery from 100-year-old avian museum specimens.

Museum specimens collected prior to cryogenic tissue storage are increasingly being used as genetic resources, and though high-throughput sequencing is becoming more cost-efficient, whole genome sequencing (WGS) of historical DNA (hDNA) remains inefficient and costly due to its short fragment sizes and high loads of exogenous DNA, among other factors. It is also unclear how sequencing efficiency is influenced by DNA sources. We aimed to identify the most efficient method and DNA source for collecting WGS data from avian museum specimens. We analyzed low-coverage WGS from 60 DNA libraries prepared from four American Robin (Turdus migratorius) and four Abyssinian Thrush (Turdus abyssinicus) specimens collected in the 1920s. We compared DNA source (toepad versus incision-line skin clip) and three library preparation methods: (1) double-stranded DNA (dsDNA), single tube (KAPA); (2) single-stranded DNA (ssDNA), multi-tube (IDT); and (3) ssDNA, single tube (Claret Bioscience). We found that the ssDNA, multi-tube method resulted in significantly greater endogenous DNA content, average read length, and sequencing efficiency than the other tested methods. We also tested whether a predigestion step reduced exogenous DNA in libraries from one specimen per species and found promising results that warrant further study. The ~10% increase in average sequencing efficiency of the best-performing method over a commonly implemented dsDNA library preparation method has the potential to significantly increase WGS coverage of hDNA from bird specimens. Future work should evaluate the threshold for specimen age at which these results hold and how the combination of library preparation method and DNA source influence WGS in other taxa.

Molecular basis for nuclear accumulation and targeting of the inhibitor of apoptosis BIRC2.

The inhibitor of apoptosis protein BIRC2 regulates fundamental cell death and survival signaling pathways. Here we show that BIRC2 accumulates in the nucleus via binding of its second and third BIR domains, BIRC2BIR2 and BIRC2BIR3, to the histone H3 tail and report the structure of the BIRC2BIR3-H3 complex. RNA-seq analysis reveals that the genes involved in interferon and defense response signaling and cell-cycle regulation are most affected by depletion of BIRC2. Overexpression of BIRC2 delays DNA damage repair and recovery of the cell-cycle progression. We describe the structural mechanism for targeting of BIRC2BIR3 by a potent but biochemically uncharacterized small molecule inhibitor LCL161 and demonstrate that LCL161 disrupts the association of endogenous BIRC2 with H3 and stimulates cell death in cancer cells. We further show that LCL161 mediates degradation of BIRC2 in human immunodeficiency virus type 1-infected human CD4+ T cells. Our findings provide mechanistic insights into the nuclear accumulation of and blocking BIRC2.

Presence of Human DNA on Household Dogs and Its Bi-Directional Transfer.

Awareness of the factors surrounding the transfer of DNA from a person, item, or surface to another person, item, or surface is highly relevant during investigations of alleged criminal activity. Animals in domestic environments could be a victim, offender, or innocent party associated with a crime. There is, however, very limited knowledge of human DNA transfer, persistence, prevalence, and recovery (DNA TPPR) associated with domestic animals. This pilot study aimed to improve our understanding of DNA TPPR associated with domestic dogs by collecting and analysing samples from various external areas of dogs of various breeds, interactions with humans, and living arrangements, and conducting a series of tests to investigate the possibility of dogs being vectors for the indirect transfer of human DNA. Reference DNA profiles from the dog owners and others living in the same residence were acquired to assist interpretation of the findings. The findings show that human DNA is prevalent on dogs, and in the majority of samples, two-person mixtures are present. Dogs were also found to be vectors for the transfer of human DNA, with DNA transferred from the dog to a gloved hand during patting and a sheet while walking.

Extracting DNA from Preserved Mosquito Blood Meals.

Mosquito species vary in their host associations. Although some species are relative generalists, most specialize, to varying extents, on particular types of host animals. Mosquito host associations are among the most important factors that influence the transmission dynamics of mosquito-vectored pathogens, and understanding these associations can provide insight on how such pathogens move within ecosystems. Characterization of the host associations of mosquito species requires applying blood meal analysis to the largest possible sample size of mosquito blood meals. Processing large samples of mosquito blood meals can be time-consuming, especially when chain-termination sequencing is used, necessitating individual processing of each specimen. Various methods and commercially available kits and products are available for extracting DNA from mosquito blood meals. The hot sodium hydroxide and Tris (HotSHOT) method is a rapid and inexpensive method of DNA extraction that is compatible with the recovery of DNA from mosquito blood meals preserved on QIAcard Flinders Technology Associates (FTA) Classic Cards (FTA cards). FTA cards allow nucleic acids found in blood meals to be preserved easily, even in field conditions. DNA prepared using this method is suitable for polymerase chain reaction (PCR)-based blood meal analysis.

From clean spaces to crime scenes: Exploring trace DNA recovery from titania-coated self-cleaning substrates

Titanium dioxide (titania, TiO2) is frequently used as a coating for a variety of self-cleaning products, such as antifogging vehicle mirrors, ceramic tiles, and glass windows because of its distinct physiochemical features. When exposed to light TiO2 causes photocatalytic decomposition of organic contaminants, potentially compromising DNA integrity. The impact of TiO2-coated commercial glasses, Bioclean® and SaniTise™, on trace DNA persistence, recovery, and profiling was investigated. DNA in saliva and touch samples deposited on self-cleaning glass slides exposed to indoor fluorescent light for up to seven days was more degraded than control samples indicating some degree of fluorescent light-induced photocatalytic activity of the self-cleaning surfaces. When exposed to sunlight, DNA yields from saliva and touch samples deposited on the titania-coated substrates decreased rapidly, with a corresponding increase in DNA degradation. After three days no DNA samples applied to self-cleaning glass and exposed to natural sunlight yielded STR profiles. These results suggest that the photocatalytic activation of TiO2 is the likely mechanism of action underlying the extreme DNA degradation on the Bioclean® and SaniTise™ glasses. Consequently, rapid sample collection and use may be warranted in casework scenarios involving TiO2-coated materials.

Effects of solvent-based adhesive removal on the subsequent dual analysis of fingerprint and DNA

The combined approach of classical fingerprinting and DNA profiling is a powerful tool in forensic investigations of latent “touch” traces. However, little attention has been paid to the organic solvents frequently used in dactyloscopic laboratories to facilitate the separation of adhesive evidence prior to fingerprint development and downstream effects on subsequent DNA profiling. In the present study, we tested a selection of adhesive removers (n = 9) and assessed their potential impact on DNA recovery and amplification by PCR. Thereby, we identified and characterized novel PCR inhibitors. All investigated chemicals contain volatile organic compounds that evaporate under normal indoor atmospheric conditions. Exposure to certain solvents resulted in increased DNA degradation, but only if evaporation was prevented. A series of adhesive-removal experiments were conducted with prepared mock evidence (self-adhesive postage stamps affixed to paper envelope) to investigate the impact of treatment time and the location of applied traces on DNA recovery and dactyloscopy, respectively. Due to the early onset of print decomposition, we found that only a short treatment time was compatible with the development of fingerprints on the adhesive side of a stamp. Solvents also removed DNA from the adhesive surface, thus resulting in a marked shift in the substrate distribution of recovered DNA from the stamp to the envelope, but not in the reverse direction. Furthermore, we observed that treatment with conventional fingerprint reagents lead to a significant reduction in the amounts of DNA recovered from stamps, while the additional use of adhesive removers did not significantly enhance this effect.

Comparison of DNA extraction methods for 16S rRNA gene sequencing in the analysis of the human gut microbiome

The gut microbiome is widely analyzed using high-throughput sequencing, such as 16S rRNA gene amplicon sequencing and shotgun metagenomic sequencing (SMS). DNA extraction is known to have a large impact on the metagenomic analyses. The aim of this study was to compare DNA extraction protocols for 16S sequencing. In that context, four commonly used DNA extraction methods were compared for the analysis of the gut microbiota. Commercial versions were evaluated against modified protocols using a stool preprocessing device (SPD, bioMérieux) upstream DNA extraction. Stool samples from nine healthy volunteers and nine patients with a Clostridium difficile infection were extracted with all protocols and 16S sequenced. Protocols were ranked using wet- and dry-lab criteria, including quality controls of the extracted genomic DNA, alpha-diversity, accuracy using a mock community of known composition and repeatability across technical replicates. SPD improved overall efficiency of three of the four tested protocols compared with their commercial version, in terms of DNA extraction yield, sample alpha-diversity, and recovery of Gram-positive bacteria. The best overall performance was obtained for the S-DQ protocol, SPD combined with the DNeasy PowerLyser PowerSoil protocol from QIAGEN. Based on this evaluation, we strongly believe that the use of such stool preprocessing device improves both the standardization and the quality of the DNA extraction in the human gut microbiome studies.

Diagnostic models to predict nuclear DNA and mitochondrial DNA recovery from incinerated teeth.

Teeth are frequently used for human identification from burnt remains, as the structure of a tooth is resilient against heat exposure. The intricate composition of hydroxyapatite (HA) mineral and collagen in teeth favours DNA preservation compared to soft tissues. Regardless of the durability, the integrity of the DNA structure in teeth can still be disrupted when exposed to heat. Poor DNA quality can negatively affect the success of DNA analysis towards human identification. The process of isolating DNA from biological samples is arduous and costly. Thus, an informative pre-screening method that could aid in selecting samples that can potentially yield amplifiable DNA would be of excellent value. A multiple linear regression model to predict the DNA content in incinerated pig teeth was developed based on the colourimetry, HA crystallite size and quantified nuclear and mitochondrial DNA. The chromaticity a* was found to be a significant predictor of the regression model. This study outlines a method to predict the viability of extracting nuclear and mitochondrial DNA from pig teeth that were exposed to a wide range of temperatures (27 to 1000 °C) with high accuracy (99.5-99.7%).

An improved DNA extraction method for detecting Bacillus subtilis spores in spiked foods and beverages

Bacillus and Paenibacillus spp. are essential aerobic spoilage bacteria in various food industry sectors. Spoilage from microorganisms occurs at many points throughout food production systems. Due to their complex wall structures, spores can resist heat, radiation, chemical agents, and enzymatic treatments. An alkaline lysis and mechanical disruption combination method was developed and evaluated to counter this. This combination method effectively improved DNA extraction from B. subtilis spore cells spiked into food (solid) and beverages (liquid milk and coffee) at concentrations down to 102 CFU/mL or g when spiked into food matrices and drinks. Released DNA recoveries were 27 % and 25 % for potato salad and 38 % and 36 % for whole corn spiked at 106 and 103 CFU/mL concentrations. Conversely, there was a low recovery for wheat flour (10 % and 8.8 %) and milk powders (12 % and 25 %) at 106 and 103 CFU/mL spiked concentrations. The combination method provides rapid, specific, reliable, and accurate signature sequences identification for the detection and presence confirmation of psychrophilic and psychrotolerant spoilage spore cells, improving food spoilage assessments and food control applications.

Collecting touch DNA from glass surfaces using different sampling solutions and volumes: Immediate and storage effects on genetic STR analysis.

Touch DNA has become increasingly important evidence in todays' forensic casework. However, due to its invisible nature and typically minute amounts of DNA, the collection of biological material from touched objects remains a particular challenge that underscores the importance of the best collection methods for maximum recovery efficiency. So far, swabs moistened with water are often utilized in forensic crime scene investigations for touch DNA sampling, even though an aqueous solution provokes osmosis, endangering the cell's integrity. The aim of the research presented here was to systematically determine whether DNA recovery from touched glass items can be significantly increased by varying swabbing solutions and volumes compared with water-moistened swabs and dry swabbing. A second objective was to investigate the possible effects of storage of swab solutions prior to genetic analysis on DNA yield and profile quality when stored for 3 and 12 months, as is often the case with crime scene samples. Overall, the results indicate that adapting volumes of the sampling solutions had no significant effect on DNA yield, while the detergent-based solutions performed better than water and dry removal, with the SDS reagent yielding statistically significant results. Further, stored samples showed an increase in degradation indices for all solutions tested, but no deterioration in DNA content and profile quality, allowing for unrestricted processing of touch DNA samples stored for at least 12 months. One further finding was a strong intraindividual change in DNA amounts observed over the 23 deposition days which may be related to the donor's menstrual cycle.

An improved method for intracellular DNA (iDNA) recovery from terrestrial environments.

The simultaneous extraction of intracellular DNA (iDNA) and extracellular DNA (eDNA) can help to separate the living in situ community (represented by iDNA) from background DNA that originated both from past communities and from allochthonous sources. As iDNA and eDNA extraction protocols require separating cells from the sample matrix, their DNA yields are generally lower than direct methods that lyse the cells within the sample matrix. We, therefore, tested different buffers with and without adding a detergent mix (DM) in the extraction protocol to improve the recovery of iDNA from surface and subsurface samples that covered a variety of terrestrial environments. The combination of a highly concentrated sodium phosphate buffer plus DM significantly improved iDNA recovery for almost all tested samples. Additionally, the combination of sodium phosphate and EDTA improved iDNA recovery in most of the samples and even allowed the successful extraction of iDNA from extremely low-biomass iron-bearing rock samples taken from the deep biosphere. Based on our results, we recommend using a protocol with sodium phosphate in combination with either a DM (NaP 300 mM + DM) or EDTA (NaP + EDTA 300 mM). Furthermore, for studies that rely on the eDNA pool, we recommend using buffers solely based on sodium phosphate because the addition of EDTA or a DM resulted in a decrease in eDNA for most of the tested samples. These improvements can help reduce community bias in environmental studies and contribute to better characterizations of both modern and past ecosystems.

다공성 물질에서 인체 시료 채취를 위한 접착제의 적용

Many of the crime scene evidences are collected by transferring body fluids that are attached to the surface using a tool such as a sterile cotton swab or tape. The amount of body fluids transferred to the collection tool directly affects the possibility of DNA profiling. In this study, the recovery rate of body fluids and the detection rate of DNA profile were examined using sterile cotton swabs, rubber coating agents and urethane-based adhesives from porous materials. We prepared porous samples by spraying 100㎕ of diluted blood on their surface, each sample was collected using a sterile cotton swab, rubber coating agent, and urethane-based adhesive, and DNA recovery rates were compared. In the result, urethane-based adhesives showed the highest recovery rate of DNA with 68.6%. Rubber coating agent and sterile cotton swab showed 47.2% and 2.9% of recovery rate, respectively. Furthermore, we measured the FT-IR spectra of the rubber coating agent and the urethane-based adhesive and found that the peak of C=O group was larger in urethane-based adhesive. This result indicates that the polarity of urethane-based adhesive is greater than that of rubber coating agent and it has excellent blood wettability. As a collection tool, urethane-based adhesive had the disadvantage of taking a long drying time in the sampling process, however, it showed a high recovery rate when collecting body fluids from porous samples, and possibility for use in actual incident cases was confirmed.

Use of a commercially available hydrogel as a novel DNA surface sampling tool.

A common requirement in the military, law enforcement, and forensic mission space is the need to collect trace samples from surfaces using a method that not only readily captures the sample but also retains its integrity for downstream identification and characterization. Additionally, collecting samples from three-dimensional objects (e.g., shell casings) is a challenge for which there is currently no validated standardized approach. Recently, hydrogels have been shown to have the potential for surface collection of trace bacterial spores, amino acids, and DNA. To test whether these hydrogels can serve as a viable collection medium for sampling DNA from surfaces, we carried out a series of preliminary tests examining collection efficiency and suitability of hydrogel material to recover samples of diluted, dried human DNA on a smooth polycarbonate surface. The recovery of surface DNA using a commercially available hydrogel was examined, and the efficiency compared to samples collected using a standard foam collection swab. DNA collected using the hydrogel and swab methods was then examined using quantitative polymerase chain reaction (qPCR) and short tandem repeat (STR) analysis to determine whether the collection material was compatible with these downstream processes. The hydrogel material used for this study collected the experimental DNA with comparable efficiency to standard collection swabs. In addition, qPCR and STR analyses demonstrated compatibility with the hydrogel collection and extraction process. These data suggest that hydrogels have the potential to be used as sample collection materials and deserve further characterization to elucidate their utility in collection from irregularly shaped, three-dimensional surfaces/materials.