Method For Isolation Of DNA Research Articles

Extraction of high-quality genomic DNA and identification of different DNA barcoding markers for chickpea (Cicer arietinum L.)

The genetic studies of individual plants, especially self-pollinated species like chickpea need to be evaluated at the DNA level with the help of molecular markers for identifying genetic variations among the plants. High-quality DNA extraction is a prerequisite for genetic studies. Extraction of intact genomic DNA with high – molecular mass is essential for the study of many molecular biology applications like Polymerase Chain Reaction, endonuclease restriction digestion, southern blot analysis, and also for the construction of a genomic library. Several plant DNA extraction methods are available, even though the DNA isolation methods that give good yield employing both quantity and quality is quite difficult especially for self-pollinated crops like a chickpea. This work was focused on developing a standard protocol for the extraction of genomic DNA and identifying different barcoding markers. The result revealed that the CTAB extraction method with slight modification in protocol had been optimized for DNA isolation. The purified DNA, which was isolated through the CTAB method, had excellent spectral qualities and is efficiently digested by a restriction endonuclease, and is found to be more suitable for long-fragment PCR amplification. DNA barcoding is considered as a promising tool because it provides a practical and standard identification of plants. The isolated DNA sample was processed with a classical DNA barcoding approach by amplifying and sequencing with a universal primer. According to the result, among the different barcoding markers studied, the RbcL and Mat K were found to given the best result for molecular species identification in chickpea.

Bacteriophage genotyping using BOXA repetitive-PCR

BackgroundRepetitive-PCR (rep-PCR) using BOXA1R and BOXA2R as single primers was investigated for its potential to genotype bacteriophage. Previously, this technique has been primarily used for the discrimination of bacterial strains. Reproducible DNA fingerprint patterns for various phage types were generated using either of the two primers.ResultsThe similarity index of replicates ranged from 89.4–100% for BOXA2R-PCR, and from 90 to 100% for BOXA1R-PCR. The method of DNA isolation (p = 0.08) and the phage propagation conditions at two different temperatures (p = 0.527) had no significant influence on generated patterns. Rep-PCR amplification products were generated from different templates including purified phage DNA, phage lysates and phage plaques. The use of this method enabled comparisons of phage genetic profiles to establish their similarity to related or unrelated phages and their bacterial hosts.ConclusionThe findings suggest that repetitive-PCR could be used as a rapid and inexpensive method to preliminary screen phage isolates prior to their selection for more comprehensive studies. The adoption of this rapid, simple and reproducible technique could facilitate preliminary characterisation of a large number of phage isolates and the investigation of genetic relationship between phage genotypes.

Molecular identification and antioxidant test of Chaetoceros sp. from Gondol, Bali

Chaetoceros is one of the largest genera of microalgae that has more than 400 species and it is the primary producer in the marine ecosystem. Chaetoceros sp. has some of the pigment which is very important for their survival including chlorophyll and carotenoid pigments. This study aims to identify Chaetoceros sp. from Gondol Bali using ITS fragments, to understand its phylogenetic relationship between microalgae-based on their antioxidant activity. The results of ITS fragments identification and antioxidant activity of Chaetoceros sp. will be used to develop further research related to its potency. The method for microalgae DNA isolation was conducted using the Doyle and Doyle method following with amplification using ITS4 and ITS5 primer. Then, the sequences will be analyzed. The antioxidant activity will be performed by the DPPH method. The results of DNA isolation showed the concentration and purity for about 2842.1 ng / µl and1.97 respectively. PCR products from the amplification of the ITS fragment produced 882 bp. Phylogenetic analysis revealed that Chaetoceros sp. from Gondol Bali had a close relationship with C. muelleri KF 998567.1 and the antioxidant activity test showed IC50 values were about 72,386 ppm.

Comparison of methods for the isolation of cell-free DNA from cell culture supernatant.

In vitro characterization of cell-free DNA using two-dimensional cell culture models is emerging as an important step toward an improved understanding of the physical and biological characteristics of cell-free DNA in human biology. However, precise measurement of the cell-free DNA in cell culture medium is highly dependent on the efficacy of the method used for DNA purification, and is often a juncture of experimental confusion. Therefore, in this study, we compared six commercially available cell-free DNA isolation kits for the recovery of cell-free DNA from the cell culture supernatant of a human bone cancer cell line (143B), including two magnetic bead-based manual kits, one automated magnetic bead-based extraction method, and three manual spin-column kits. Based on cell-free DNA quantitation and sizing, using the Qubit dsDNA HS assay and Bioanalyzer HS DNA assay, respectively, the different methods showed significant variability concerning recovery, reproducibility, and size discrimination. These findings highlight the importance of selecting a cell-free DNA extraction method that is appropriate for the aims of a study. For example, mutational analysis of cell-free DNA may be enhanced by a method that favors a high yield or is biased toward the isolation of short cell-free DNA fragments. In contrast, quantitative analysis of cell-free DNA in a comparative setting (e.g. measuring the fluctuation of cell-free DNA levels over time) may require the selection of a cell-free DNA isolation method that forgoes a high recovery for high reproducibility and minimal size bias.

New protocol for successful isolation and amplification of DNA from exiguous fractions of specimens: a tool to overcome the basic obstacle in molecular analyses of myxomycetes.

Herbarium collections provide an essential basis for a wide array of biological research and, with development of DNA-based methods, they have become an invaluable material for genetic analyses. Yet, the use of such material is hindered by technical limitations related to DNA degradation and to quantity of biological material. The latter is inherent for some biological groups, as best exemplified by myxomycetes which form minute sporophores. It is estimated that ca. two-thirds of myxomycete taxa are represented by extremely scanty material. As DNA isolation methods applied so far in myxomycete studies require destructive sampling of many sporophores, a large part of described diversity of the group remains unavailable for phylogenetic studies or barcoding. Here, we tested several procedures of DNA isolation and amplification to seek for an efficient and possibly non-destructive method of sampling. Tests were based on herbarium specimens of 19 species representing different taxonomic orders. We assayed several variants of isolation based on silica gel membrane columns, and a newly designed procedure using highly reduced amount of biological material (small portion of spores), based on fine disruption of spores and direct PCR. While the most frequently used column-based method led to PCR success in 89.5% of samples when a large amount of material was used, its performance dropped to 52% when based on single sporophores. Single sporophores provided amplicons in 89.5% of samples when using a kit dedicated to low-amount DNA samples. Our new procedure appeared the most effective (94.7%) while it used only a small fraction of spores, being nearly non-destructive; it was also the most cost-effective. We thus demonstrate that combination of adequate handling of spore micro-disruption coupled with application of direct PCR can be an efficient way to circumvent technical limitations for genetic studies in myxomycetes and thus can substantially improve taxon sampling for phylogeny and barcoding. Additionally, this approach gives a unique possibility to apply both molecular and morphological assays to the same structure (sporophore), which then can be further stored as documentation.

Performance evaluation of a new custom, multi-component DNA isolation method optimized for use in shotgun metagenomic sequencing-based aerosol microbiome research

BackgroundAerosol microbiome research advances our understanding of bioaerosols, including how airborne microorganisms affect our health and surrounding environment. Traditional microbiological/molecular methods are commonly used to study bioaerosols, but do not allow for generic, unbiased microbiome profiling. Recent studies have adopted shotgun metagenomic sequencing (SMS) to address this issue. However, SMS requires relatively large DNA inputs, which are challenging when studying low biomass air environments, and puts high requirements on air sampling, sample processing and DNA isolation protocols. Previous SMS studies have consequently adopted various mitigation strategies, including long-duration sampling, sample pooling, and whole genome amplification, each associated with some inherent drawbacks/limitations.ResultsHere, we demonstrate a new custom, multi-component DNA isolation method optimized for SMS-based aerosol microbiome research. The method achieves improved DNA yields from filter-collected air samples by isolating DNA from the entire filter extract, and ensures a more comprehensive microbiome representation by combining chemical, enzymatic and mechanical lysis. Benchmarking against two state-of-the-art DNA isolation methods was performed with a mock microbial community and real-world air samples. All methods demonstrated similar performance regarding DNA yield and community representation with the mock community. However, with subway samples, the new method obtained drastically improved DNA yields, while SMS revealed that the new method reported higher diversity. The new method involves intermediate filter extract separation into a pellet and supernatant fraction. Using subway samples, we demonstrate that supernatant inclusion results in improved DNA yields. Furthermore, SMS of pellet and supernatant fractions revealed overall similar taxonomic composition but also identified differences that could bias the microbiome profile, emphasizing the importance of processing the entire filter extract.ConclusionsBy demonstrating and benchmarking a new DNA isolation method optimized for SMS-based aerosol microbiome research with both a mock microbial community and real-world air samples, this study contributes to improved selection, harmonization, and standardization of DNA isolation methods. Our findings highlight the importance of ensuring end-to-end sample integrity and using methods with well-defined performance characteristics. Taken together, the demonstrated performance characteristics suggest the new method could be used to improve the quality of SMS-based aerosol microbiome research in low biomass air environments.

Improved genetic identification of acipenseriform embryos with application to the endangered pallid sturgeon Scaphirhynchus albus.

We produced pallid sturgeon Scaphirhynchus albus embryos at five pre-hatch developmental stages and isolated and quantified genomic DNA from four of the stages using four commercial DNA isolation kits. Genomic DNA prepared using the kit that produced the largest yields and concentrations were used for microsatellite DNA analyses of 10-20 embryos at each of the five developmental stages. We attempted to genotype the hatchery-produced embryos at 19 microsatellite loci and confirmed reliable genotyping by comparing the microsatellite genotypes to those of known parents. Embryos at stages 5 and 8 did not produce reliable genotyping while those at stages 14, 24 and 33 did. We used the same DNA isolation method on 262 wild-caught acipenseriform embryos collected from the lower Yellowstone River. A total of 200 of the wild embryos were successfully identified to stages 8 to 34 and the rest could not be staged. Using a combination of single nucleotide polymorphism and microsatellite markers, 249 of the wild-caught embryos were genetically identified as paddlefish Polyodon spathula, five were identified as shovelnose sturgeon Scaphirhynchus platorynchus and eight failed to amplify. None were identified as pallid sturgeon. This study demonstrates that early-stage wild-spawned acipenseriform embryos can be genetically identified less than 24 h post-spawn. This methodology will be useful for recovery efforts for endangered pallid sturgeon and can be applied to other acipenseriform species.

Evaluation of DNA Extraction Methods for Detection of <i>Leishmania</i> by Polymerase Chain Reaction

There are several methods used to obtain DNA from cells; however, the quantity, integrity, and purity of DNA vary among the methods, which may interfere with the polymerase chain reaction (PCR) results. The objective was to determine the most efficient and cost-effective method that provides the best DNA yield and PCR results. Three methods of DNA isolation were compared: 20% sodium dodecyl sulfate (SDS), guanidine isothiocyanate-phenol-chloroform (GTPC), and DNA extraction using a commercial kit (GE Healthcare GenomicPrep Blood DNA Isolation KitTM). Human peripheral blood samples were inoculated with 104 promastigotes of Leishmania infantum. DNA was quantified and PCR was performed with 13A/13B primers. The results showed that a higher DNA yield was obtained using the GTPC technique (214.51 ng/μL), followed by SDS (26.16 ng/μL) and the commercial kit (10.99 ng/μL). We concluded that while all of the techniques were effective for obtaining DNA, the GTPC method provided the best yield and the brightest bands.

Comparison of Economically Favourable and Further Development Friendly DNA Isolation Methods from Microbial Cultures

Microorganisms, regardless of whether pathogenic or not, may cause enormous economic losses due to adverse effects on human and animal health, or by damaging the quality of the agricultural and food products. Based on these effects, the development of prompt molecular methods and their involvement in the practical pathogen diagnostic diagnostics is more than actual. This paper is focused on the evaluation of easy-to-perform and highly budget-friendly, PCR-related DNA purification protocols for diagnostic purposes especially in water or similar simple matrices. The slight modifications of earlier described DNA isolation methods, which rely on chelate exchange resin and/or ethanol-sodium-based heat lysis, we reevaluated in comparison with a widely used commercial kit. The efficiency of DNA purification techniques was assessed from Gramnegative as well as Gram-positive bacteria and yeast using quantitative PCR. The effectivity of different methods tested may vary depending on the bacterial or yeast species in question. Nevertheless, in our hands, the chelate exchange resin-based methods were found to be the most robust and/or satisfying at least by an acceptable reproducibility rate. Our presented results support the potential of low-cost but still sensitive molecular microbe detection procedures consisting of only a few pipetting steps resulting in good reproducibility and the least possible environmental burden, serving as a good starting point for developments of matrix-specific processes and methods.

Research Article A simple and inexpensive modified CTAB and silica particles-based method for recalcitrant plant genomic DNA isolation

Research Article A simple and inexpensive modified CTAB and silica particles-based method for recalcitrant plant genomic DNA isolation

An Efficient Method of Mitochondrial DNA Isolation from Vigna radiata for Genomic Studies.

Isolation of mitochondrial DNA from root tissues of mung bean (Vigna radiata) is quite tedious, complex, and often results in low yield. Hence here we show a simple, rapid, and improved protocol for isolation of mitochondrial DNA from root tissues of hydroponically grown mung bean plants. This method involves purification of mitochondria and subsequent isolation of DNA from obtained purified mitochondria. For this purpose, mitochondria were isolated using a discontinuous Percoll gradient centrifugation followed by RNase I treatment to the isolated DNA to remove any traces of RNA contamination. The mitochondrial DNA was isolated from mitochondrial samples by commonly used CTAB method. The specificity of isolated mitochondrial DNA was confirmed using mtDNA-specific genes (NAD1 and COX3). β-Actin primer was used to check the nuclear DNA contamination. PCR amplification was observed in mtDNA specific genes NAD1 and COX3 except nuclear encoded β-actin gene suggesting that mitochondrial DNA was not contaminated by nuclear DNA.

Метод экстракции ДНК из широкого спектра объектов с помощью обработки солями аммония

Currently, simple, rapid, and efficient techniques for DNA isolation from a wide range of organisms are in demand in biotechnology and bioinformatics. A key (and often limiting) step is the cell wall disruption and subsequent DNA extraction from the disintegrated cells. We have developed a new approach to DNA isolation from organisms with robust cell walls. The protocol includes the following steps: treatment of cells or tissue samples with ammonium acetate followed by cell lysis in low-salt buffer with the addition of SDS. Further DNA extraction is carried out according to standard methods. This approach is efficient for high-molecular native DNA isolation from bacteria, ascomycetes, yeast, and mammalian blood; it is also useful for express analysis of environmental microbial isolates and for plasmid extraction for two-hybrid library screening. express method for DNA isolation; ammonium salt treatment (в русских ключевых такой порядок), osmotic breakage of cells This study was financially supported by the NRC "Kurchatov Institute"-GOSNIIGENETIKA Kurchatov Genomic Center.

Rapid high throughput template preparation (rHTTP) method: a novel cost effective method of direct PCR for a wide range of plants

BackgroundConventional plant DNA isolation methods are complex, time consuming and require technical expertise. These limitations were overcome using the DNA isolation kits which, however significantly add to the research costs. Hence the present study was aimed to develop a high throughput, rapid and inexpensive method of PCR ready DNA template preparation from plant materials.MethodsConcentration of SDS in lysis buffer, amount of starting material, period and temperature for lysis were optimized for obtaining PCR ready templates from plant materials. The method was tested using RAPD and ITS specific primers for different plant species like rice, wheat, mustard, pea, soybean, pigeonpea, tomato, maize, march lilly, bougainvillea, Indian blanket flower, nerium, petunia, purple pirouette petunia, moses-in-the-cradle, golden cane palm, duranta, periwinkle, chrysanthemum and two xerophytes viz. Dipterygium glaucum and Crotaleria burhia. SSR markers RM18398 and RM26108 showed successful amplification in rice varieties Improved Pusa Basmati 1 and KS Dev 12. The effectiveness of the method was tested using fresh as well as 1 year old tissues. The storability of the lysate was also tested.ResultsIn this report, we developed a novel method called rapid high throughput template preparation (rHTTP) method to prepare PCR ready DNA templates. Most striking feature of this technique is that it can be done anywhere where water can be boiled by any means. Using rHTTP method, PCR ready templates can be prepared in just 10 min. Robust and reproducible amplification for all the test plants were recorded with RAPD, plant ITS primers and SSR markers following this method. rHTTP methods works well for both fresh as well as old plant tissues. The lysates had a shelf life of 1 month when stored at 4 °C and 3 days when stored at room temperature.ConclusionsrHTTP method has several advantages over the other protocols like ease of execution, no requirement of tissue grinding/liquid nitrogen/hazardous chemicals and above all, equally effective for both fresh and old samples. Using this method, costs per prep comes down ~ 10–50 times as compared to most commercial kits. This method can be used for on-field experiments like molecular diagnostics, varietal identification etc.

Comparative investigation of DNA extraction methods in black gram (Vigna mungo (L.)

Isolation of intact, double stranded, pure and non- contaminated genomic DNA is prerequisite for large scale genotyping analysis including DNA-banks. Three methods of DNA isolation (Dellaporta, CTAB and Hi-PurAg DNA isolation kits) from 25 black gram genotypes were compared in terms of the yield, purity, integrity, and stability of extracted DNA. Purity and quantification of isolated DNA samples was confirmed by using the UV nano-spectrophotometer at OD260/280 and the same is confirmed based by agarose gel electrophoresis. The CTAB method showed the best results followed by Hi-PurAg and Dellaporta method. The CTAB DNA extraction method was found to be the most efficient DNA extraction method, capable of providing high quality, pure and stable DNA and could be used for various molecular related works. All the 25 black gram genotypes for this research gave good yield of DNA from the established modified CTAB protocol.

DNA extraction from paraffin embedded colorectal carcinoma samples: A comparison study of manual vs automated methods, using four commercially kits.

BACKGROUNDNucleic acid isolation from formalin-fixed, paraffin-embedded tissue (FFPET) samples is a daily routine in molecular pathology laboratories, but extraction from FFPET is not always easily achieved. Choosing the right extraction technique is key for further examinations.AIMTo compare the performance of four commercially available kits used for DNA extraction in routine practice.METHODSDNA isolation was performed on 46 randomly selected formalin-fixed, paraffin-embedded (FFPE) colorectal adenocarcinoma (CRC) surgical specimens. Four commercially available extraction kits were used: two for manual DNA extraction (the PureLink Genomic DNA Mini Kit from Invitrogen and the High Pure FFPE DNA Isolation Kit from Roche) and two for automated DNA extraction (the iPrep Genomic DNA Kit from Invitrogen and the MagnaPure LC DNA Isolation Kit from Roche). The DNA concentration and quality (odds ratio) among the four systems were compared. The results were correlated with the clinicopathological aspects of CRC cases: age, gender, localization, macro- and microscopic features, lymph node metastases, and the lymph node ratio.RESULTSThe highest DNA concentration was obtained using the manual kits: 157.24 ± 62.99 ng/µL for the PureLink Genomic DNA Mini Kit and 86.64 ng/µL ± 43.84 for the High Pure FFPE DNA Isolation Kit (P < 0.0001). Lower concentrations were obtained with automated systems: 20.39 ± 21.19 ng/µL for the MagnaPure LC DNA Isolation Kit and 8.722 ± 6.408 ng/µL for the iPrep Genomic DNA Kit, with differences between the systems used (P < 0.0001). The comparison between age, gender, tumor localization, pT or pN stage and the lymph node ratio indicated no statistically significant difference in DNA concentration using any of the nucleic acid isolation kits. DNA concentration was influenced by the macroscopic features and grade of differentiation. A higher DNA concentration was obtained for well-differentiated polypoid colorectal adenocarcinomas (CRCs), compared with undifferentiated ulcero-infiltrative carcinomas, irrespective of the kit used.CONCLUSIONFor research or diagnosis that needs high DNA concentrations, manual methods of DNA isolation should be used. A higher amount of DNA can be obtained from polypoid-type differentiated CRCs. Automated systems confer comfort and a lower amount of DNA that is, however, sufficient for classic polymerase chain reaction (PCR) and real-time quantitative PCR molecular examinations. All four commercially available kits can be successfully used in daily practice.

A Low-Cost High-Throughput Method for Plant Genomic DNA Isolation.

Many of the functional genomics methods require isolation of genomic DNA from large population of plants. The selection of DNA isolation protocols depends on several factors such as choice of starting material, ease of handling, time and labor required for isolation, the final quantity as well as the quality of genomic DNA. We outline here a high-throughput method of DNA extraction from different plant species including cereal crops. The protocol can be used for extraction of DNA in single tubes as well as for large formats in 96-well plates. The protocol includes steps for eliminating interfering secondary products such as phenolics. This protocol can be applied for high-throughput isolation of DNA for varied applications such as TILLING, mapping, fingerprinting, etc. as a cost-effective protocol compared to commercial kits.

Poly (2-hydroxypropylene imines) functionalized magnetic polydopamine nanoparticles for high-efficiency DNA isolation

A rapid and efficient DNA isolation method without toxic agents and centrifugation is essential. In this study, we synthesized a novel kind of magnetic nanocomposite (Fe3O4@PDA@PHP) readily by coating polydopamine (PDA) and grafting poly (2-hydroxypropylene imines) (PHP) onto the surface of Fe3O4 magnetic nanoparticles for DNA isolation. TEM, FTIR, VSM and XPS characterization results indicated the prepared Fe3O4@PDA@PHP nanocomposite possessed core-shell structure and PHP was successfully grafted onto magnetic polydopamine nanoparticles. The isolation behaviors of Fe3O4@PDA@PHP for DNA were also evaluated taking into factors such as DNA concentration, initial binding solution pH and extraction time. Results showed that pseudo-second-order model and Freundlich isotherm model well fitted the kinetic results and the equilibrium extraction data, respectively. Meanwhile, the resultant magnetic nanocomposite performed excellent isolation properties toward DNA higher than other studied materials at same conditions, and had excellent specificity in presence of some proteins and metal ions. Moreover, Fe3O4@PDA@PHP could retain high isolation capacity after five using-cycles and have high biocompatibility. Therefore, the resultant Fe3O4@PDA@PHP would be a promising device for the isolation of DNA in biological application.

Evaluation of DNA Extraction Methods of Mule Dung

DNA isolation is a critical step in microbial community analysis of animal dung. DNA isolation from mule dung is challenging due to microbial diversity, composition and chemical nature of mule dung. Therefore, selection of an appropriate DNA isolation method is important to analyse the complete microbial diversity. In the current study, we evaluated the DNA isolation from mule dung samples (n=11) using QiAmp Mini stool kit as per manufacturer’s procedure with modifications. The results suggest that modifications in proprietary column based method improved the DNA quality and quantity suitable for mule dung microbial community analyses.

Comparison between different methods of DNA isolation from dried blood spots for determination of malaria to determine specificity and cost effectiveness.

DNA extraction from filter paper by using different methods was compiled through a thorough review of many research articles published in various journals. When performing malaria epidemiological surveys in remote area, it is difficult to collect blood samples and transport it. In field particularly in remote area where facilities for storing and processing of samples does not exist, there surveillance and diagnosis of malaria is very difficult. In this review we are focused upon four simple methods of DNA isolation from the field collected blood and mosquito abdomen blood meal spotted on Whatman No. 1 or No. 3 filter paper. The main DNA isolation methods are Chelex-100, Tris-EDTA (TE) buffer; Methanol based DNA extraction and Phosphate buffer saline (PBS) using Lysis buffer and Phenol-Chloroform method. Efforts have been taken to identify the methods which are cost-effective and take less time to extract DNA from dried blood spots (DBS) and whole mosquitoes. The purpose of this paper is to update the knowledge and find a method to extract DNA from DBS which will be specific, rapid, cost-effective, less time consuming and feasible for epidemiological survey in remote area.

A Simple and Cost-Effective Freeze-Thaw Based Method for Plasmodium DNA Extraction from Dried Blood Spot

Available DNA isolation methods for Plasmodium involve numerous processing steps, adding to the cost and conferring risk of contamination. Here we devise a simple and cost-effective method for direct extraction of Plasmodium DNA from dried filter paper spot (DBS), appropriate for resource-limited setups. The protocol involves simple freezing and thawing of DBS, neither involves any purification step nor any chemical reagent. The method was assessed in terms of DNA quantity, PCR detection sensitivity, time requirement, cost effectiveness, labor intensiveness and degree of shearing. The reliability of this method was confirmed by comparing it with other in use methods for Plasmodium DNA isolation. Pure DNA was obtained with this method, as exemplified by the absorbance ratio (260nm /280nm) of 1.2. The protocol produced digestible, PCR-grade genomic DNA, also found to be suitable for sequencing. DNA isolated remained stable and retained its integrity after storage for one month at 4 °C. Our process substantiated as efficient, reproducible, simple, fast, and inexpensive. Development of this optimized freeze-thaw based DNA extraction method for malaria parasite may provide a valuable tool for molecular analysis in resource-limited setups. This is the first report of DNA extraction from DBS of Plasmodium utilizing freeze-thaw.