Disulfide Linkages Research Articles

Quenched Zwitterionic Cyclic Arg-Gly-Asp-Containing Pentapeptide Probe for Real-Time Brain Tumor Imaging.

The efficacy of glioblastoma treatment is closely associated with complete tumor resection. However, conventional surgical techniques often result in incomplete removal, leading to poor prognosis. A major challenge is the accurate delineation of tumor margins from healthy tissues. Imaging-guided surgery, particularly using fluorescent probes, is a promising solution for intraoperative guidance. The recently developed 'always-on' types of targeted fluorescence probes generate signals irrespective of their presence in tumor cells or in blood circulation, hampering their effectiveness. Here, we propose a novel activatable fluorescence imaging probe, Q-cRGD, that targets glioma cells via the specific binding of the cyclic Arg-Gly Asp-containing pentapeptide (cRGD) to integrins. The Q-cRGD probe was synthesized by conjugating a near-infrared (NIR) dye to a tryptophan quencher via a disulfide linkage, including a cRGD-targeting ligand. This activatable probe remained inactive until the redox-responsive cleavage of the disulfide linkage occurred within the target cell. The zwitterionic nature of NIR dyes minimizes nonspecific interactions with serum proteins, thereby enhancing the tumor-to-background signal ratio (TBR). An in vivo fluorescence imaging study demonstrated a TBR value of 2.65 within 3 h of the intravenous injection of Q-cRGD, confirming its potential utility in imaging-guided brain cancer surgery.

Highly Ionic Conductive, Self-Healing, Li10GeP2S12-Filled Composite Solid Electrolytes Based on Reversibly Interlocked Macromolecule Networks for Lithium Metal Batteries with Improved Cycling Stability.

Ceramic-polymer composite solid electrolytes (CSEs) have attracted great attention by combining the advantages of polymer electrolytes and inorganic ceramic electrolytes. Herein, Li10GeP2S12 (LGPS) particles are incorporated into poly(ethylene oxide) (PEO)-based reversibly interlocked polymer networks (RILNs) derived from the topological rearrangement of two PEO networks cross-linked by reversible imine bonds and disulfide linkages. A series of highly ionic conductive, self-healing CSEs are obtained accordingly. The interlocking architecture successfully inhibits PEO crystallization, increasing the amorphous phase for Li ion transportation, and stabilizes the conductive pathways of LGPS particles by its unique confinement effect. Meanwhile, the LGPS particles cooperate with the RILN matrix, forming a filler-polymer interfacial phase for additional Li ion transportation and strengthening and toughening the resultant CSEs via the strong intermolecular Li+-O2- interactions. Furthermore, the dynamic characteristics of the included reversible bonds ensure a multiple intrinsic self-healing capability. Consequently, the CSEs containing 15 wt % LGPS deliver a high ionic conductivity (1.06 × 10-3 S cm-1) and high Li ion transference number (∼0.6) at 25 °C, a wide electrochemical stability window (>4.9 V), good mechanical properties (0.63 MPa, 377%), and a stable CSE/Li anode interface. The integrated Li/CSE/LiFePO4 battery exhibits a specific discharge capacity of 110.8 mAh g-1 at 1 C (25 °C) and a capacity retention of 76.9% after 200 cycles. Thanks to the healability, the damaged CSEs can regain the structural integrity, ion conductive capability, and cycling performance of the assembled cells. The present work provides an effective strategy to fabricate CSEs for lithium metal batteries that are workable at ambient temperature.

Fluoro-Crown Ether Phosphate as Efficient Cell-Permeable Drug Carrier by Disrupting Hydration Layer.

Fast and direct permeation of drug molecules is crucial for effective biotherapeutics. Inspired by a recent finding that fluorous compounds disrupt the hydrogen-bonded network of water, we developed fluoro-crown ether phosphate CyclicFP-X. This compound acts as a fast cell-permeating agent, enabling direct delivery of various bioactive cargos (X) into cancer cells without endocytic entrapment. In contrast, its nonfluorinated cyclic analog (CyclicP-X) failed to achieve cellular internalization. Although the acyclic fluorous analog AcyclicFP-X was internalized, this process occurred slowly owing to the involvement of an endocytic trapping pathway. Designed with a high fluorine density, CyclicFP-X exhibits compactness, polarity, and high-water solubility, facilitating lipid vesicle fusion by disrupting their hydration layers. Raman spectroscopy confirmed the generation of dangling -OH bonds upon addition of CyclicFP-OH to water. Furthermore, conjugating CyclicFP-X with fluorouracil (FU, an anticancer drug) via a reductively cleavable disulfide linker (CyclicFP-SS-FU) demonstrated the general utility of fluoro-crown ether phosphate as a potent carrier for biotherapeutics.

Selection of functional sperm by using hyaluronic acid modified magnetic microbeads and an electromagnetic manipulation system.

In recent years, the incidence of infertility has increased year by year. Assisted reproductive technology (ART) is one of the effective strategies to treat infertility. In the process of ART, commonly used methods for sperm separation have shortcomings and there is still room for improvement. In this study, a functional sperm selection strategy was established based on hyaluronic acid (HA) modified magnetic microbeads (MBs) and a supporting two-dimensional electromagnetic manipulation device system. Due to the modification of HA on the surface of MBs, the HA-MBs have the ability to target and bind to specific receptors on the sperm membrane to form a sperm-MB complex. A disulfide linker was introduced to connect HA and MBs. After modifying HA and connecting it with the disulfide linker, the sperm of sperm-MBs can be released under the combined effect of hyaluronidase and reduced GSH with the disulfide bond broken and HA degraded. A two-dimensional electromagnetic manipulation system was introduced to generate a magnetic field and control the directional movement of the sperm-MB complex under the guidance of an inverted microscope. The free MBs can also be removed after the sperm is released. Furthermore, the mouse sperm selected through this strategy can achieve normal insemination via ICSI and the obtained blastocysts have normal morphology and developmental milestones. This strategy has potential to be developed into an automated screening solution for the screening of functional sperm for assisted reproductive technology.

Exploring a Gemcitabine-Glucose Hybrid as a Glycoconjugate Prodrug.

Nucleoside analogues are established treatments for cancer and viral infection. Gemcitabine is a commonly employed nucleoside analogue displaying anticancer properties against a range of tumor types but is rapidly inactivated in vivo. Efforts to bolster its pharmaceutical profile include investigating prodrug forms. Herein, we explore the synthesis of a novel glucose-gemcitabine glycoconjugate, targeting uptake via glucose transport. We select a redox-reactive disulfide linker for conjugation of gemcitabine (through N4-cytosine) with glucose. Evaluation of this glycoconjugate reveals increased toxicity against androgen insensitive PC3 prostate cancer cells compared to LNCaP (which have lower levels of glucose transporter GLUT1). These preliminary results suggest that glycoconjugation of nucleosides may be an effective approach to targeting cells which display increased uptake and metabolism of glucose.

Direct and Reversible Transformations between Intermolecular Polymer Networks and Single-Chain Nanoparticles Based on Thermally Dissociable Bis(hindered amino)disulfide Linkages

Direct and Reversible Transformations between Intermolecular Polymer Networks and Single-Chain Nanoparticles Based on Thermally Dissociable Bis(hindered amino)disulfide Linkages

Chemical composition and molecular structure of asphaltene in Azerbaijani crude oil: A case study of the Zagli field

The lack of information about the chemical composition and structure of asphaltenes in crude oil, which has a sufficient share in the economy of Azerbaijan, complicates its processing and use. As a first attempt, this research is devoted to the detailed analysis of the average molecular structure and properties of asphaltenes isolated from crude oil samples collected from the Zaglı oil field using the integrated application of high-sensitivity devices such as Nuclear Magnetic Resonance (NMR), Ultraviolet–Visible (UV–Vis), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction analysis, Elemental analysis, Scanning Electron Microscope (SEM), Differential Thermal Analysis (DTA), Dynamic Light Scattering (DLS). The average molecular formula of asphaltene monomer was determined to be C49.5H55O3.04N0.95S2. An island architecture with one polycyclic aromatic hydrocarbon (PAH) in each molecule of this compound is predominant. Amorphous asphaltene molecule contains vanadium-based porphyrins, –COOH group, disulfide (−S-S-) linkage. It was found that asphaltene of crude oil is stable up to 406 °C. The three-stage pyrolysis process in the temperature range of 406–818 °C resulted in the formation of 12.58 % coke. Due to the absence of free radicals in the range of 25–100 ℃, the asphaltene sample is dielectric. The decrease of monodispersity with particle growth in asphaltene compound in different solvents was analyzed by dynamic and static light scattering. The HOMO-LUMO energy gap of the asphaltene molecule was 2.666 eV, indicating high stability. The knowledge gained about the chemical composition and molecular structure of asphaltenes can help prevent problems arising in oil production and refining processes.

Iron-chelated and GSH-responsive polymersome nanoreactors facilitating therapeutic cascade reactions in cooperative starvation-ferroptosis therapy

A combination of starvation therapy and ferroptosis offers a potent therapeutic strategy to treat triple-negative breast cancer (TNBC). Herein, a polymersome-based nanoreactor containing ferric ions and glucose oxidase (GOx) activates cascade reactions for multifaced and cooperative cancer treatments. The nanoreactor is constructed from a redox-responsive poly(methacrylic acid)–SS–poly(ε-caprolactone) copolymer (PCL–SS–PMAA) with a disulfide linkage located between the hydrophobic and hydrophilic junctions. The hydrophilic core of the polymersome (namely PSP) is loaded with oxidoreductase enzyme to induce starvation, and the outer shell of carboxylic groups is chelated with Fe3+ ions to activate ferroptosis. The nanoreactor, FePSP@GOx, demonstrates the activation of a chain reaction that produces reactive oxygen species (ROS), thereby accelerating ferroptosis. The TNBC cell line MDA-MB-231 exposed to FePSP@GOx exhibits efficient glutathione (GSH) and glutathione peroxidase 4 (GPX4) depletion. Furthermore, the level of lipid peroxidation in MDA-MB-231 cells is significantly enhanced following the treatment with FePSP@GOx. In cytotoxicity assays, MDA-MB-231 cells treated with FePSP@GOx show pronounced enhancement in cell death. The integrated results imply that while starvation therapy coincides with the occurrence of a defensive autophagic response, the predominance of the ferroptosis mechanism over autophagy ultimately leads to cell death. FePSP@GOx, constructed from a GSH-responsive copolymer as a cascade nanoreactor, is a safe and promising nanomedicine for cooperative starvation-ferroptosis cancer therapy.

Tailored design of NHS–SS–NHS cross-linked chitosan nano-hydrogels for enhanced anti-tumor efficacy by GSH-responsive drug release

The traditional chemotherapeutic agents’ disadvantages such as high toxicity, untargeting and poor water solubility lead to disappointing chemotherapy effects, which restricts its clinical application. In this work, novel size-appropriate and glutathione (GSH)-responsive nano-hydrogels were successfully prepared via the active ester method between chitosan (containing –NH2) and cross-linker (containing NHS). Especially, the cross-linker was elaborately designed to possess a disulfide linkage (SS) as well as two terminal NHS groups, namely NHS–SS–NHS. These functionalities endowed chitosan-based cross-linked scaffolds with capabilities for drug loading and delivery, as well as a GSH-responsive mechanism for drug release. The prepared nano-hydrogels demonstrated excellent performance applicable morphology, excellent drug loading efficiency (∼22.5%), suitable size (∼100 nm) and long-term stability. The prepared nano-hydrogels released over 80% doxorubicin (DOX) after incubation in 10 mM GSH while a minimal DOX release less than 25% was tested in normal physiological buffer (pH = 7.4). The unloaded nano-hydrogels did not show any apparent cytotoxicity to A 549 cells. In contrast, DOX-loaded nano-hydrogels exhibited marked anti-tumor activity against A 549 cells, especially in high GSH environment. Finally, through fluorescent imaging and flow cytometry analysis, fluorescein isothiocyanate-labeled nano-hydrogels show obvious specific binding to the GSH high-expressing A549 cells and nonspecific binding to the GSH low-expressing A549 cells. Therefore, with this cross-linking approach, our present finding suggests that cross-linked chitosan nano-hydrogel drug carrier improves the anti-tumor effect of the A 549 cells and may serve as a potential injectable delivery carrier.

Moxifloxacin-loaded nanoparticles of thiolated xyloglucan for ocular drug delivery: Permeation, mucoadhesion and pharmacokinetic evaluation

The current study goal was to improve mucoadhesive potential and ocular pharmacokinetics of nanoparticles of thiolated xyloglucan (TXGN) containing moxifloxacin (MXF). Thiolation of xyloglucan (XGN) was achieved with esterification with 3-mercaptopropionic acid. TXGN was characterized by NMR and FTIR analysis. The nanoparticles of TXGN were prepared using ionic-gelation method and evaluate the antibacterial properties. TXGN and nanoparticles were determined to possess 0.06 and 0.08 mmol of thiol groups/mg of polymer by Ellman's method. The ex-vivo bioadhesion time of TXGN and nanoparticles was higher than XGN in a comparative assessment of their mucoadhesive properties. The creation of a disulfide link between mucus and TXGN is responsible for the enhanced mucoadhesive properties of TXGN (1-fold) and nanoparticles (2-fold) over XGN. Improved MXF penetration in nanoparticulate formulation (80 %) based on TXGN was demonstrated in an ex-vivo permeation research utilizing rabbit cornea. Dissolution study showed 95 % release of MXF from nanoparticles. SEM images of nanoparticles showed spherical shape and cell viability assay showed nontoxic behavior when tested on RPE cell line. Antibacterial analysis revealed a zone of inhibition of 31.5 ± 0.5 mm for MXF, while NXM3 exhibited an expanded zone of 35.5 ± 0.4 mm (p < 0.001). In conclusion, thiolation of XGN improves its bioadhesion, permeation, ocular-retention and pharmacokinetics of MXF.

Covalent Polymer-RNA Conjugates for Potent Activation of the RIG-I Pathway.

RNA ligands of retinoic acid-inducible gene I (RIG-I) are a promising class of oligonucleotide therapeutics with broad potential as antiviral agents, vaccine adjuvants, and cancer immunotherapies. However, their translation has been limited by major drug delivery barriers, including poor cellular uptake, nuclease degradation, and an inability to access the cytosol where RIG-I is localized. Here this challenge is addressed by engineering nanoparticles that harness covalent conjugation of 5'-triphospate RNA (3pRNA) to endosome-destabilizing polymers. Compared to 3pRNA loaded into analogous nanoparticles via electrostatic interactions, it is found that covalent conjugation of 3pRNA improves loading efficiency, enhances immunostimulatory activity, protects against nuclease degradation, and improves serum stability. Additionally, it is found that 3pRNA could be conjugated via either a disulfide or thioether linkage, but that the latter is only permissible if conjugated distal to the 5'-triphosphate group. Finally, administration of 3pRNA-polymer conjugates to mice significantly increases type-I interferon levels relative to analogous carriers that use electrostatic 3pRNA loading. Collectively, these studies have yielded a next-generation polymeric carrier for in vivo delivery of 3pRNA, while also elucidating new chemical design principles for covalent conjugation of 3pRNA with potential to inform the further development of therapeutics and delivery technologies for pharmacological activation of RIG-I.

Comprehensive Stress Stability Studies Reveal the Prominent Stability of the Liquid-Formulated Biotherapeutic Asymmetric Monovalent Bispecific IgG1 Monoclonal Antibody Format

The developed asymmetric monovalent bispecific IgG1 or Duet monoclonal antibody (Duet mAb) has two distinct fragment antigen-binding region (Fab) subunits that target two different epitope specificities sequentially or simultaneously. The design features include unique engineered disulfide bridges, knob-into-hole mutations, and kappa and lambda chains to produce Duet mAbs. These make it structurally and functionally complex, so one expects challenging developability linked to instability, degradation of products and pathways, and limited reports available. Here, we have treated the product with different sources of extreme stress over a lengthy period, including varying heat, pH, photo stress, chemical oxidative stress, accelerated stress in physiological conditions, and forced glycation conditions. The effects of different stress conditions on the product were assessed using various analytical characterization tools to measure product-related substances, post-translational modifications (PTMs), structural integrity, higher-order disulfide linkages, and biological activity. The results revealed degradation products and pathways of Duet mAb. A moderate increase in size, charge, and hydrophobic variants, PTMs, including deamidation, oxidation, isomerization, and glycation were observed, with most conditions exhibiting biological activity. In addition, the characterization of fractionated charge variants, including deamidated species, showed satisfactory biological activity. This study demonstrated the prominent stability of the Duet mAb format comparable to most marketed mAbs.

Redox-Regulated and Guest-Driven Transformations of Aromatic Oligoamide Foldamers in Advanced Structures.

In this study, we demonstrate that an aromatic oligoamide sequence assembles into a trimeric helix-turn-helix architecture with a disulfide linkage, and upon cleavage of this linkage, it reconstructs into an antiparallel double helix. The antiparallel double helix is accessible to encapsulate a diacid guest within its cavity, forming a 2:1 host-guest complex. In contrast, hydrogen-bonding interactions between the trimeric-assembled structure and guests induce a conformational shift in the trimeric helix, resulting in a cross-shaped double-helix complex at a 2:2 host-guest ratio. Interconversions between the trimeric helix and the antiparallel double helix, along with their respective host-guest complexes, can be initiated through thiol/disulfide redox-mediated regulation.

Improving functionality and texturization potential of novel pennycress (Thlaspi arvense) protein by inducing polymerization

Pennycress protein isolate (PcPI) has inferior gelation and water holding properties compared to market leader soy protein, preventing its use in food applications such as meat analogues. Therefore, this work aimed to induce polymerization of PcPI by either cold atmospheric plasma (CAP) or transglutaminase (TG) to improve functionality and texturization potential. Micro-compounding was utilized to determine bench-scale texturization potential of unmodified, CAP, and TG modified PcPI hydrated at 50% moisture. CAP treatment following dielectric barrier discharge (DBD) induced polymerization primarily through disulfide linkages. Whereas, TG resulted in a relatively higher extent of polymerization induced by disulfide linkages and other covalent interactions involving mostly cruciferin acidic subunits. Compared to unmodified PcPI, the gel strength doubled and tripled post CAP and TG treatments, respectively. TG treatment caused a significant increase in water holding capacity by 20%. Unmodified PcPI did not form fibrous structures upon micro-compounding, instead it formed a soft mass with low resilience and cohesiveness. CAP modified PcPI (PcPI-CP) had the lowest water holding properties, which resulted in a relatively hard (significantly highest mechanical energy), dense fibrous structures. Due to high gelation strength and water holding capacity, TG modified PcPI (PcPI-TG) resulted in less dense fibrous structures with more air incorporation (significantly higher void %) relative to PcPI control and PcPI-CP. PcPI-TG texturized mass had significantly higher chewiness that is desirable for meat analogues. This research, for the first time, confirmed the potential success of induced polymerization of PcPI, especially with TG, in enhancing gelation and texturization potential.

Disulfidptosis decoded: a journey through cell death mysteries, regulatory networks, disease paradigms and future directions.

Cell death is an important part of the life cycle, serving as a foundation for both the orderly development and the maintenance of physiological equilibrium within organisms. This process is fundamental, as it eliminates senescent, impaired, or aberrant cells while also promoting tissue regeneration and immunological responses. A novel paradigm of programmed cell death, known as disulfidptosis, has recently emerged in the scientific circle. Disulfidptosis is defined as the accumulation of cystine by cancer cells with high expression of the solute carrier family 7 member 11 (SLC7A11) during glucose starvation. This accumulation causes extensive disulfide linkages between F-actins, resulting in their contraction and subsequent detachment from the cellular membrane, triggering cellular death. The RAC1-WRC axis is involved in this phenomenon. Disulfidptosis sparked growing interest due to its potential applications in a variety of pathologies, particularly oncology, neurodegenerative disorders, and metabolic anomalies. Nonetheless, the complexities of its regulatory pathways remain elusive, and its precise molecular targets have yet to be definitively identified. This manuscript aims to meticulously dissect the historical evolution, molecular underpinnings, regulatory frameworks, and potential implications of disulfidptosis in various disease contexts, illuminating its promise as a groundbreaking therapeutic pathway and target.

Absence of calcium-sensing receptor basal activity due to inter-subunit disulfide bridges

G protein-coupled receptors naturally oscillate between inactive and active states, often resulting in receptor constitutive activity with important physiological consequences. Among the class C G protein-coupled receptors that typically sense amino-acids and their derivatives, the calcium sensing receptor (CaSR) tightly controls blood calcium levels. Its constitutive activity has not yet been studied. Here, we demonstrate the importance of the inter-subunit disulfide bridges in maintaining the inactive state of CaSR, resulting in undetectable constitutive activity, unlike the other class C receptors. Deletion of these disulfide bridges results in strong constitutive activity that is abolished by mutations preventing amino acid binding. It shows that this inter-subunit disulfide link is necessary to limit the agonist effect of amino acids on CaSR. Furthermore, human genetic mutations deleting these bridges and associated with hypocalcemia result in elevated CaSR constitutive activity. These results highlight the physiological importance of fine tuning the constitutive activity of G protein-coupled receptors.

Codelivery of CPT and siPHB1 with GSH/ROS Dual-Responsive Hybrid Nanoparticles Based on a [12]aneN3-Derived Lipid for Synergistic Lung Cancer Therapy.

The combination of small-interfering RNA (siRNA)-mediated gene silencing and chemotherapeutic agents for lung cancer treatment has attracted widespread attention in terms of a greater therapeutic effect, minimization of systemic toxicity, and inhibition of multiple drug resistance (MDR). In this work, three amphiphiles, CBN1-CBN3, were first designed and synthesized as a camptothecin (CPT) conjugate and gene condensation agents by the combination of CPT prodrugs and di(triazole-[12]aneN3) through the ROS-responsive phenylborate ester and different lengths of alkyl chains (with 6, 9, 12 carbon chains for CBN1-CBN3, respectively). CBN1-CBN3 were able to be self-assembled into liposomes with an average diameter in the range of 320-240 nm, showing the ability to effectively condense siRNA. Among them, CBN2, with a nine-carbon alkyl chain, displayed the best anticancer efficiency in A549 cells. In order to give nanomedicines a stealth property and PEGylation/dePEGylation transition, a GSH-responsive PEGylated TPE derivative containing a disulfide linkage (TSP) was further designed and prepared. A combination of CBN2/siRNA complexes and DOPE with TSP resulted in GSH/ROS dual-responsive lipid-polymer hybrid nanoparticles (CBN2-DP/siRNA NPs). In present GSH and H2O2, CBN2-DP/siRNA NPs were decomposed, resulting in the controlled release of CPT drug and siRNA. In vitro, CBN2-DP/siPHB1 NPs showed the best anticancer activity for suppression of about 75% of A549 cell proliferation in a serum medium. The stability of CBN2-DP/siRNA NPs was significantly prolonged in blood circulation, and they showed effective accumulation in the A549 tumor site through an enhanced permeability and retention (EPR) effect. In vivo, CBN2-DP/siPHB1 NPs demonstrated enhanced synergistic cancer therapy efficacy and tumor inhibition as high as 71.2%. This work provided a strategy for preparing lipid-polymer hybrid NPs with GSH/ROS dual-responsive properties and an intriguing method for lung cancer therapy.

Chemical Genetics in C. elegans Identifies Anticancer Mycotoxins Chaetocin and Chetomin as Potent Inducers of a Nuclear Metal Homeostasis Response.

C. elegans numr-1/2 (nuclear-localized metal-responsive) is an identical gene pair encoding a nuclear protein previously shown to be activated by cadmium and disruption of the integrator RNA metabolism complex. We took a chemical genetic approach to further characterize regulation of this novel metal response by screening 41,716 compounds and extracts for numr-1p::GFP activation. The most potent activator was chaetocin, a fungal 3,6-epidithiodiketopiperazine (ETP) with promising anticancer activity. Chaetocin activates numr-1/2 strongly in the alimentary canal but is distinct from metal exposure, because it represses canonical cadmium-responsive metallothionine genes. Chaetocin has diverse targets in cancer cells including thioredoxin reductase, histone lysine methyltransferase, and acetyltransferase p300/CBP; further work is needed to identify the mechanism in C. elegans as genetic disruption and RNAi screening of homologues did not induce numr-1/2 in the alimentary canal and chaetocin did not affect markers of integrator dysfunction. We demonstrate that disulfides in chaetocin and chetomin, a dimeric ETP analog, are required to induce numr-1/2. ETP monomer gliotoxin, despite possessing a disulfide linkage, had almost no effect on numr-1/2, suggesting a dimer requirement. Chetomin inhibits C. elegans growth at low micromolar levels, and loss of numr-1/2 increases sensitivity; C. elegans and Chaetomiaceae fungi inhabit similar environments raising the possibility that numr-1/2 functions as a defense mechanism. There is no direct orthologue of numr-1/2 in humans, but RNaseq suggests that chaetocin affects expression of cellular processes linked to stress response and metal homeostasis in colorectal cancer cells. Our results reveal interactions between metal response gene regulation and ETPs and identify a potential mechanism of resistance to this versatile class of preclinical compounds.

Network Polymer Properties Engineered Through Polymer Backbone Dispersity and Structure

AbstractDispersity (Ð or Mw/Mn) is an important parameter in material design and as such can significantly impact the properties of polymers. Here, polymer networks with independent control over the molecular weight and dispersity of the linear chains that form the material are developed. Using a RAFT polymerization approach, a library of polymers with dispersity ranging from 1.2—1.9 for backbone chain‐length (DP) 100, and 1.4—3.1 for backbone chain‐length 200 were developed and transformed to networks through post‐polymerization crosslinking to form disulfide linkers. The tensile, swelling, and adhesive properties were explored, finding that both at DP 100 and DP 200 the swelling ratio, tensile strength, and extensibility were superior at intermediate dispersity (1.3—1.5 for DP 100 and 1.6—2.1 for DP 200) compared to materials with either substantially higher or lower dispersity. Furthermore, adhesive properties for materials with chains of intermediate dispersity at DP 200 revealed enhanced performance compared to the very low or high dispersity chains.

Network Polymer Properties Engineered Through Polymer Backbone Dispersity and Structure.

Dispersity (Ð or Mw/Mn) is an important parameter in material design and as such can significantly impact the properties of polymers. Here, polymer networks with independent control over the molecular weight and dispersity of the linear chains that form the material are developed. Using a RAFT polymerization approach, a library of polymers with dispersity ranging from 1.2-1.9 for backbone chain-length (DP) 100, and 1.4-3.1 for backbone chain-length 200 were developed and transformed to networks through post-polymerization crosslinking to form disulfide linkers. The tensile, swelling, and adhesive properties were explored, finding that both at DP 100 and DP 200 the swelling ratio, tensile strength, and extensibility were superior at intermediate dispersity (1.3-1.5 for DP 100 and 1.6-2.1 for DP 200) compared to materials with either substantially higher or lower dispersity. Furthermore, adhesive properties for materials with chains of intermediate dispersity at DP 200 revealed enhanced performance compared to the very low or high dispersity chains.