Drug Dissolution Rate Research Articles

Formulation and Physicochemical Characterization of Cyclosporine Microfiber by Electrospinning.

Purpose: The objective of this study was to improve the permeability and water solubility rate of a poor water soluble drug, cyclosporine A (CsA). Methods: In order to improve the drug dissolution rate and oral bioavailability, electrospinning method was used as an approach to prepare. The fibers were evaluated for surface morphology, thermal characterizations, drug crystallinity, in vitro drug release and in vivo bioavailability studies. Results: Scanning electron microscope (SEM) results confirmed that the fibers were in microsize range and the size of the fibers was in the rang of 0.2 to 2 micron. Differential scanning calorimetry (DSC) and powder X-ray diffractometry (XRPD) analysis ensured that the crystalline lattice of drug were weakened or destroyed in the fibers. The drug release was 15.28%, 20.67%, and 32.84% from pure drug, fibers of formulation B, and formulation A, respectively. In vivo study results indicated that the bioavailability parameters of the optimized fiber formulation were improved and the maximum concentration (Cmax) were significantly higher for fibers (3001 ng/mL) than for pure drug (2550 ng/mL). The dissolution rate of the formulations was dependent on the nature and ratio of drug to carriers. Conclusion: The physicochemical properties showed that the optimized mixture of polyethylene glycol (PEG) and povidone (PVP) fibers could be an effective carrier for CsA delivery. PEG and PVP fibers improved the absolute bioavailability and drug dissolution rate with appropriate physicochemical properties.

Novel oral dosage regimen based on self-nanoemulsifying drug delivery systems for codelivery of phytochemicals – Curcumin and thymoquinone

BackgroundCurcumin and Thymoquinone are very well-known phytochemicals for their potent anti-inflammatory and anticancer properties. The major challenges for curcumin is its poor aqueous solubility and erratic oral bioavailability. ObjectiveTo develop a novel liquid self-nanoemulsifying drug delivery system (SNEDDS) containing curcumin and thymoquinone and further converted into a solid dosage form using adsorbents Syloid® and Neusilin® as the solid carrier. MethodsThe characterization of the liquid and solid SNEDDS was performed by particle size & zeta potential analysis, scanning electron microscopy, differential scanning calorimetry, fourier transform infrared spectroscopy and X-ray powder diffraction. The drug loading, and in vitro release studies were carried out to investigate the efficiency of curcumin release from SNEDDS. ResultsThe liquid SNEDDS containing black seed oil showed excellent self-emulsification performance with transparent appearance. The results of characterization studies showed that solidification using 50% (w/w) Syloid® and Neusilin® in the liquid formulation yield free flowing powder with no agglomeration but Neusilin® produced smooth granules than Syloid® and kept the drugs stable in amorphous state. In vitro dissolution studies indicated that liquid SNEDDS formulations of F4 and its solid SNEDDS using Neusilin® provided high dissolution efficiency and reproducibility for curcumin and thymoquinone. However, Neusilin® showed higher rate of dissolution (more than 65%, p < 0.05) compared to Syloid® for curcumin. ConclusionsCurcumin loaded-SNEDDS formulation containing thymoquinone in liquid & solid dosage forms were successfully developed with an increased drug loading and dissolution rate, which could be the potential combined delivery system for various anti-inflammatory and anti-cancer treatments.

The Process⁻Property⁻Performance Relationship of Medicated Nanoparticles Prepared by Modified Coaxial Electrospraying.

In pharmaceutical nanotechnology, the intentional manipulation of working processes to fabricate nanoproducts with suitable properties for achieving the desired functional performances is highly sought after. The following paper aims to detail how a modified coaxial electrospraying has been developed to create ibuprofen-loaded hydroxypropyl methylcellulose nanoparticles for improving the drug dissolution rate. During the working processes, a key parameter, i.e., the spreading angle of atomization region (θ, °), could provide a linkage among the working process, the property of generated nanoparticles and their functional performance. Compared with the applied voltage (V, kV; D = 2713 − 82V with RθV2 = 0.9623), θ could provide a better correlation with the diameter of resultant nanoparticles (D, nm; D = 1096 − 5θ with RDθ2 = 0.9905), suggesting a usefulness of accurately predicting the nanoparticle diameter. The drug released from the electrosprayed nanoparticles involved both erosion and diffusion mechanisms. A univariate quadratic equation between the time of releasing 95% of the loaded drug (t, min) and D (t = 38.7 + 0.097D − 4.838 × 105D2 with a R2 value of 0.9976) suggests that the nanoparticle diameter has a profound influence on the drug release performance. The clear process-property-performance relationship should be useful for optimizing the electrospraying process, and in turn for achieving the desired medicated nanoparticles.

Predicting the critical quality attributes of ibuprofen tablets via modelling of process parameters for roller compaction and tabletting.

Roller compaction is a low cost granulation process which application is sometimes limited by the granular loss of compactability and reduced drug dissolution rate. Hence, the design of a robust manufacturing process is key in order to ensure quality of tablets. In this study, for ibuprofen tablets with high drug loading (<7% excipients), the correlations between two critical process parameters (CPPs), namely roller force during granulation and compaction pressure during tabletting, and several critical quality attributes (CQAs) were investigated using a design of experiment (DoE) approach. Multivariate analysis (MVA) was utilized to identify the best regression model to predict CQAs such as disintegration, dissolution, weight uniformity, hardness, porosity and tensile strength for 200 and 600 mg ibuprofen tablets. The tabletting compaction pressure had a greater impact on the aforementioned CQAs than compactor roller force. The Principal Component Analysis (PCA) correlation loading plot showed that compaction pressure was directly related to disintegration time, tensile strength and hardness, and inversely related to both the percentage of drug dissolved and porosity. The inverse correlations were observed for the roller force applied during dry granulation. Amongst all the regression models constructed, multiple linear regression (MLR) showed the best correlation between CPPs and CQAs.

Solid-State Behavior and Solubilization of Flash Nanoprecipitated Clofazimine Particles during the Dispersion and Digestion of Milk-Based Formulations.

Clofazimine, a drug previously used to treat leprosy, has recently been identified as a potential new drug for the treatment for cryptosporidiosis: a diarrheal disease that contributes to 500 000 infant deaths a year in developing countries. Rapid dissolution and local availability of the drug in the small intestine is considered key to the treatment of the infection. However, the commercially available clofazimine formulation (Lamprene) is not well-suited to pediatric use, and therefore reformulation of clofazimine is desirable. Development of clofazimine nanoparticles through the process of flash nanoprecipitation (FNP) has been previously shown to provide fast and improved drug dissolution rates compared to clofazimine crystals and Lamprene. In this study, we investigate the effects of milk-based formulations (as possible pediatric-friendly vehicles) on the in vitro solubilization of clofazimine formulated as either lecithin- or zein/casein-stabilized nanoparticles. Milk and infant formula were used as the lipid vehicles, and time-resolved synchrotron X-ray scattering was used to monitor the presence of crystalline clofazimine in suspension during in vitro lipolysis under intestinal conditions. The study confirmed faster dissolution of clofazimine from all the FNP formulations after the digestion of infant formula was initiated, and a reduced quantity of fat was required to achieve similar levels of drug solubilization compared to the reference drug material and the commercial formulation. These attributes highlight not only the potential benefits of the FNP approach to prepare drug particles but also the fact that enhanced dissolution rates can be complemented by considering the amount of co-administered fat in lipid-based formulations to drive the solubilization of poorly soluble drugs.

Multicomponent solid dispersion as a formulation strategy to improve drug permeation: A case study on the anti-colorectal cancer irinotecan

Multicomponent solid dispersions (MSD)s are frequently proposed as efficient drug delivery systems to improve drug solubility and bioavailability. In this study, the effects of specific excipients, such as mannitol, inulin, poly(methyl methacrylate-co-methacrylic)acid (PMMA) and cellulose acetate phthalate (CAP) have been tested to potentially improve irinotecan (IRN) permeation in the intestinal tract with the intention to protect the drug from the gastric environment. MSDs were formulated as microparticles by Spray-Drying technique. Raw materials and microparticles have been characterized by FTIR analysis to determine hydrogen bonding. SEM images were recorded to investigate morphology and particle size of drug-loaded microparticles, and thermal analysis was used to confirm that drug physical morphology was maintained during formulation. Finally, in vitro dissolution studies and ex-vivo experiments across colon sections were carried out. The drug-loaded microparticles resulted to have an average particle size of below 6 μm and increased both drug dissolution rate and permeation through the intestine. The use of specific excipients improved properties such as drug dissolution performances and drug absorption through the intestinal barrier. The selected method and excipients increased IRN dissolution rate in all the formulations prepared. Finally, ex-vivo experiments across colon sections demonstrated an increase of drug permeation through MSDs respect pure IRN.

Mass Transport Analysis of Bicarbonate Buffer: Effect of the CO2-H2CO3 Hydration-Dehydration Kinetics in the Fluid Boundary Layer and the Apparent Effective p Ka Controlling Dissolution of Acids and Bases.

The main buffering system influencing ionizable drug dissolution in the human intestinal fluid is bicarbonate-based; however, it is rarely used in routine pharmaceutical practice due to the volatility of dissolved CO2. The typical pharmaceutical buffers used fail to capture the unique aspects of the hydration-dehydration kinetics of the bicarbonate-CO2 system. In particular, CO2 is involved in a reversible interconversion with carbonic acid (H2CO3), which is the actual conjugate acid of the system, as follows CO2 + H2O ⇌ H2CO3. In contrast to ionization reactions, this interconversion does not equilibrate very rapidly compared to the diffusional processes through a typical fluid diffusion boundary layer at a solid-liquid interface. In this report, a mathematical mass transport analysis was developed for ionizable drug dissolution in bicarbonate using the rules of conservation of mass and electric charge in addition to accounting for the diffusional times and reaction rate constants of the CO2-H2CO3 interconversion. This model, which includes both the hydration reaction rate and dehydration reaction rate, we called the "reversible non-equilibrium" (RNE) model. The predictions made by this RNE approach for ionizable drug dissolution rates were compared to the experimental data generated by an intrinsic dissolution method for three ionizable drugs, indomethacin, ibuprofen, and haloperidol. The results demonstrate the superiority of predictions for the RNE approach compared to the predictions of a model assuming equilibrium between CO2 and H2CO3, as well as models ignoring reactions. The analysis also shows that bicarbonate buffer can be viewed as having an effective p Ka in the boundary layer that is different from that in bulk and is hydrodynamics-dependent.

Controlling the Dissolution Rate of Hydrophobic Drugs by Incorporating Carbon Nanotubes with Different Levels of Carboxylation

We present the anti-solvent precipitation of hydrophobic drugs griseofulvin (GF) and sulfamethoxazole (SMZ) in the presence of carboxylated carbon nanotubes (f-CNTs). The aqueous dispersed f-CNTs were directly incorporated into the drug particles during the precipitation process. f-CNTs with different levels of carboxylation were tested where the hydrophilicity was varied by altering the C:COOH ratio. The results show that the hydrophilic f-CNTs dramatically enhanced the dissolution rate for both drugs, and the enhancement corresponded to the hydrophilicity of f-CNTs. The time to reach 80% dissolution (t80) reduced from 52.5 min for pure SMZ to 16.5 min when incorporated f-CNTs that had a C:COOH ratio of 23.2 were used, and to 11.5 min when the ratio dropped to 16. A corresponding decrease was observed for SMZ for the above-mentioned f-CNTs. The study clearly demonstrates that it is possible to control the dissolution rate of hydrophobic drugs by altering the level of carboxylation of the incorporated CNTs.

Characterization and evaluation of different mesoporous silica kinds as carriers for the development of effective oral dosage forms of glibenclamide

This work evaluated the suitability of various mesoporous silicas as carriers for developing an oral formulation endowed with improved dissolution properties of glibenclamide, hypoglycemic agent poorly water-soluble. The different silicas were examined for solid-state, morphology, and technological and physical-chemical properties (granulometry, specific surface area, wettability, water content, water activity, apparent density, flowability, compactability). A pairwise comparison allowed a ranking, by importance order, of the parameters examined and, for each parameter, a score was assigned to each silica type. Data statistical treatment (JMP software) indicated Neusilin®US2 and Syloid®XDP3150 as the best materials. Different loading methods were tested: physical mixing; addition of drug dissolved in a volatile solvent, subsequently evaporated; addition of drug dissolved in a solvent. Methods involving drug dissolution enabled drug amorphization and intimate dispersion within the silica porous structure. Dissolution tests indicated Syloid®XDP3150 as the most effective silica in enhancing drug dissolution properties, providing a release rate clearly faster than from commercial tablets. Drug amorphization, improved wettability, increased surface area of the drug, finely dispersed into the highly porous silica, were the main factors responsible for this finding. Moreover, the obtained results suggested that drug dissolution rate can be properly tuned, based on the suited choice of the silica type.

Exploring the use of spray congealing to produce solid dispersions with enhanced indomethacin bioavailability: In vitro characterization and in vivo study

The current study proposes an original oral delivery system for the bioavailability enhancement of indomethacin (IND), a BCS class II drug, with the aim to overcome the common limitations of amorphous solid dispersion. In fact, the potential risk of drug re-crystallization is a serious concern for the stability of amorphous systems and represents, despite the great bioavailability, one of the primary causes of their limited clinical applications. IND-loaded microparticles (MPs) were prepared by spray congealing using oral-approved excipients (Gelucire 50/13 and the recently marketed Gelucire 48/16). MPs were characterized regarding particle size, morphology, drug content and IND solid state; moreover, they were tested in vitro for IND solubility and dissolution rate. Solid state characterization indicated that IND was present into the MPs in the amorphous form. The best formulation showed a considerable enhancement in drug dissolution rate and 31-fold higher drug solubility than pure γ-IND. The oral administration of MPs showed 2.5-times increased bioavailability in vivo compared to either pure γ-IND or its physical mixture with unloaded MPs. Notably, the formulation was stable after 18 months with no changes in IND solid state and dissolution performance. This study offers a valid approach to enhance IND oral bioavailability by conversion into the amorphous form by spray congealed MPs, which have great potential for industrial application due to their characteristics of high encapsulation efficiency, no-toxicity, low-cost, prolonged stability and the use of a simple and easily scaled-up manufacturing technology.

Design and characterisation of electrospun shellac-polyvinylpyrrolidone blended micro/nanofibres loaded with monolaurin for application in wound healing

Due to their ultrafine network structures, electrospun nanofibres have been potentially used for wound application. In order to develop a desired wound dressing material, shellac (SHL) was blended with polyvinyl pyrrolidone (PVP). Monolaurin (ML), which is a natural antimicrobial lipid, was incorporated into the SHL-PVP blended fibres to prevent delayed wound healing resulting from microbial infection. A full factorial design with three replicated centre points was employed in order to determine the main and interaction effects of various factors including SHL ratio in SHL-PVP blended solution, ML content and applied voltage on the multiple responses such as morphology, surface wettability, absorbency and mechanical properties. According to the results, an increase in the PVP content could lead to a significant increase in tensile strength and elongation. In addition, the presence of PVP contributed to an improvement in the drug loading capacity and dissolution rate. The fabricated fibres loaded with ML exhibited an excellent activity against Staphylococcus aureus and Candida albicans, and also provided an enhanced ability in the cell adhesion. Therefore, SHL-PVP blended fibres loaded with ML might be effectively used for application in wound healing.

Rice starch thin films as a potential buccal delivery system: Effect of plasticiser and drug loading on drug release profile

Rice starch is known to have an excellent film-forming behaviour in the packaging industry but inadequate attention was given to this biopolymer to be developed into thin films for drug delivery. Accordingly, rice starch thin films containing a model drug, paracetamol and plasticisers (glycerol or sorbitol) were developed using film casting technique. This study focuses on investigating the impact of plasticiser and drug loading on drug release pattern of rice starch films which has not been explored to date. The obtained rice films were characterised for their physicochemical properties including swelling and dissolution study. The highest drug dissolution rate was achieved in the rice films with a low drug loading due to drug amorphicity in nature. When drug loading increases, the swelling behaviour of rice films plays a dominant role in releasing drug in the crystalline form. The role of plasticiser was indicated by the plasticiser-starch interaction where a strong interaction allows drug solubilisation more readily in the dissolution medium. It is envisaged that rice films could be tailored to achieve desired drug release pattern with different plasticiser.

Ultrasound assisted crystallization of a new cardioactive prototype using ionic liquid as solvent

This work deals with the antisolvent crystallization of LASSBio-294 (3,4-methylenedioxybenzoyl-2-thienylhydrazon) assisted by ultrasound. An ionic liquid (IL), 1-ethyl-3-methylimidazolium methyl phosphonate [emim][CH3O(H)PO2] was used as solvent and water as antisolvent. The influence of the following parameters on crystals properties (size distribution, morphology, residual solvent and in vitro dissolution) were studied with two mixing mode (quick and dropwise) of solution with antisolvent. The impact of washing and drying process was also evaluated. Comparative studies of conventional crystallization conditions (without ultrasound) were also performed. The effect of ultrasound on LASSBio-294 recrystallized properties was influenced by the add mode, water/IL ratio and drug solution concentration. As example, US promoted the formation of small crystals with high residual IL under the following conditions: quick addition, high drug solution concentration and high water/IL ratio. However, despite the decrease of elementary particle size, ultrasound did not avoid crystals agglomeration. The drug dissolution rate was affected by the physical structure of agglomerates. When employed as drying process of washed crystals, spray drying reduced this agglomeration and improved the dissolution of LASSBio-294 crystals.

Engineering of solidified glyburide nanocrystals for tablet formulation via loading of carriers: downstream processing, characterization, and bioavailability.

IntroductionPresenting poorly water-soluble drugs as nanoparticles has shown to be an effective technique in enhancing drug dissolution rate, intrinsic solubility, and thus oral bioavailability. Nevertheless, working with nanoparticles introduces many challenges, one of which is their physical instability. Formulating nanoparticles into a solid dosage form may overcome such challenges and thus unlock the potential benefits of nanosizing.MethodsThe current work investigates the possibility of developing a novel solid dosage form, with enhanced dissolution rate, whereby nanocrystals (~400 nm) of the class II Biopharmaceutical Classification System drug, glyburide (GBD) were fabricated through combined precipitation and homogenization procedures. Using a novel, but scalable, spraying technique, GBD nanocrystals were loaded onto commonly used tablet fillers, water-soluble lactose monohydrate (LAC), and water insoluble microcrystalline cellulose (MCC). Conventional tableting processes were then used to convert the powders generated into a tablet dosage form.ResultsStudies of redispersibility showed considerable preservation of size characteristics of GBD nanocrystals during downstream processing with redispersibility indices of 105 and 118 for GBD–LAC and GBD–MCC, respectively. Characterization by differential scanning calorimetry, powder X-ray diffraction, and scanning electron microscopy showed that the powders generated powders contained nanosized crystals of GBD which adhered to carrier surfaces. Powder flowability was characterized using Hausner ratio (HR) and Carr’s index (CI). GBD–LAC-loaded particles exhibited poor flowability with CI and HR of 37.5% and 1.60, respectively, whilst GBD–MCC particles showed a slightly improved flowability with CI and HR of 26.47% and 1.36, respectively. The novel tablet dosage form met US Pharmacopeia specifications, including drug content, hardness, and friability.ConclusionHigher dissolution rates were observed from the nanocrystal-based tablets compared to the microsized and commercial drug formulations. Moreover, the novel nanocrystal tablet dosage forms showed enhanced in vivo performance with area under the plasma concentration– time curve in the first 24 hours values 1.97 and 2.24 times greater than that of marketed tablets.

Polymer Distribution and Mechanism Conversion in Multiple Media of Phase-Separated Controlled-Release Film-Coating.

Phase-separated films of water-insoluble ethyl cellulose (EC) and water-soluble hydroxypropyl cellulose (HPC) can be utilized to tailor drug release from coated pellets. In the present study, the effects of HPC levels and the pH, type, ionic strength and osmolarity of the media on the release profiles of soluble metoprolol succinates from the EC/HPC-coated pellets were investigated, and the differences in drug-release kinetics in multiple media were further elucidated through the HPC leaching and swelling kinetics of the pellets, morphology (SEM) and water uptake of the free films and the interaction between the coating polymers and the media compositions. Interestingly, the drug release rate from the pellets in different media was not in agreement with the drug solubility which have a positive correlation with the drug dissolution rate based on Noyes–Whitney equation law. In particular, the drug release rate in acetate buffer at pH 4.5 was faster than that in other media despite the solubility of drug was relatively lower, regardless of the HPC levels. It may be attributed to the mutual effect between the EC and acetate buffer, which improved the permeability of the film. In contrast, the release of drug in HCl solution was dependent on the HPC levels. Increasing the levels of HPC increased the effects of hydrogen ions on the polymer of HPC, which resulted in a lower viscosity and strength of the gel, forming the larger size of pores in polymer films, thus increasing the drug diffused from the coating film. Further findings in phosphate buffer showed a reduction in the drug release compared to that in other media, which was only sensitive to the osmolarity rather than the HPC level and pH of the buffer. Additionally, a mathematical theory was used to better explain and understand the experimentally measured different drug release patterns. In summary, the study revealed that the effects of the media overcompensated that of the drug solubility to some extent for controlled-release of the coating polymers, and the drug release mechanism in multiple media depend on EC and HPC rather than on HPC alone, which may have a potential to facilitate the optimization of ideally film-coated formulations.

A Mathematical Model Based on an Adaptive Neuro-Fuzzy Inference System for Matrixes Including Indomethacin

This study is concerned about prediction of dissolution rate of Insoluble drugs from solid dispersion (SD) polymer matrixes by an Adaptive Neuro-Fuzzy Inference System (ANFIS). Polyethylene Glycols (PEGs) as the SD with different molecular weights were provided and dissolution rate of indomethacin (IND) was obtained experimentally. A USP dissolution method was used to monitor the dissolution profiles of matrixes. The numbers of rules were trained in a systematic procedure using the experimental data. Comparison of IND dissolution rate from different matrixes, Area under the Curve (AUC) of absorbance vs. time diagrams in the first 25 min for 72 different samples was determined. Results show a high correlation between observed and predicted data (r2=0.85). The calculated root mean square error for the results of the ANFIS model is equal to 1.02. The index of area AUC in the first 25 min is more repeatable. It seems that the model has practical value and different ratios of polymer for the desired dissolution rate can be predicted or having different polymer ratios in the matrix can predict the dissolution rate of IND. this method can be suggested for other pharmaceuticals formulations to save time and money to achieve the best formula.

Congruent release of drug and polymer: A “sweet spot” in the dissolution of amorphous solid dispersions

Liquid-liquid phase separation (LLPS) occurs following amorphous solid dispersion (ASD) dissolution when the drug concentration exceeds the “amorphous solubility”, and is emerging as an important characteristic of formulations that may enhance the oral bioavailability of poorly soluble drugs. The purpose of this research was to identify criteria that impact the rate and extent of drug release and hence the occurrence or not of LLPS upon ASD dissolution. Specifically, the effect of drug log P, phase behavior of the hydrated but undissolved ASD matrix and the relative dissolution rates of drug and polymer were studied as a function of drug loading, using nilvadipine (Nil) (ClogP = 3.04) and cilnidipine (Cil) (ClogP = 5.54) as model drugs. The model polymer was poly (vinylpyrrolidone-co-vinyl acetate) (PVPVA). Nil-PVPVA and Cil-PVPVA ASDs with different drug loadings were prepared. Surface area normalized dissolution rates of both the drug and the polymer from ASD tablets were studied. At a similar and relatively low drug loading (<20% w/w drug), dissolution of both Nil-PVPVA and Cil-PVPVA ASDs was found to switch from rapid, congruent (i.e., simultaneous) release of drug and polymer to incongruent release with slow release of drug. Only ASDs showing congruent release underwent LLPS, with the formation of amorphous drug-rich aggregates (~300nm). Scanning electron microscopy (SEM) and micro-computed tomography (micro-CT) showed the presence of characteristic “pits” on the surface of partially dissolved, incongruently releasing ASD tablets. These most likely arise due to faster polymer release in comparison to drug, whereby the drug-rich composition around these pits was confirmed by energy-dispersive X-ray (EDX) analysis and the surface drug enrichment on the compacts was confirmed by X-ray photoelectron spectroscopy (XPS). This study demonstrates two important findings, firstly, a link between congruent release of drug and polymer and the occurrence of LLPS and secondly, the switch between congruent and incongruent release of drug and polymer is a result of competitive kinetics between phase separation and the release rate of ASD components with minimal influence from drug hydrophobicity for two structural analogues.

Development and characterization of benznidazole nano- and microparticles: A new tool for pediatric treatment of Chagas disease?

Benznidazole (BNZ) is the drug of choice for the treatment of Chagas disease in many countries. However, its low water solubility produces low and/or variable oral bioavailability. Thus, the aim of this work was to formulate micro- and nanoparticles based on Eudragit® RS PO and Eudragit® RL PO as a convenient approach to increase the dissolution rate of BNZ. The microparticles were obtained by means of spray-drying process while the nanoparticles were prepared through the nanoprecipitation technique and further freeze-drying. The results indicated that nanoparticles were obtained in 86% yield while microparticles were obtained in 68% yield. In both cases, the encapsulation efficiency of particles was greater than 78% while drug loading capacity was nearly 24% w/w and 18% w/w, after spray-drying and freeze-drying procedures, respectively. Images of scanning electron microscopy showed that the particles obtained by spray-drying and freeze-drying were in the micrometer and nanometer scale, respectively. FT-IR spectra of BNZ-loaded particles obtained by both methods showed characteristic bands of BNZ confirming that part of drug remained on their surface. Thermal analysis revealed that the drug crystallinity after both methods decreased. Physical stability evaluation of the nanoparticles confirmed that Pluronic® F68 was suitable to keep the particles size in a range of 300 nm after 70 days storage at 4 ± 2 °C. In-vitro release studies showed increased dissolution rate of drug from the particles obtained by both methods respect to untreated BNZ. The kinetics of drug release in acid media followed the Higuchi kinetics indicating drug diffusion mechanism from particles.

Physicochemical, pharmacokinetics, and histological evaluation of new naproxen-quercetin co-lyophilizate to diminish drug-induced gastric irritations in rats

Quercetin (QUE) is a flavonoid found in several plants and commonly distributed in edible vegetables and fruits. To evaluate the effect of co-lyophilization of naproxen (NPX) with QUE at different weight ratios on physicochemical characteristics induced gastric irritation, and drug pharmacokinetics. NPX binary systems with QUE in different weight ratios were prepared by freeze-drying alkalinized solutions, and were characterized in terms of physicochemical properties as well as NPX dissolution rate in acidic pH. NPX-induced gastric inflammation studies were carried out in rats for 7 days. The pharmacokinetics of the two formulations were assessed to evaluate the bioavailability of NPX-QUE 1:2 co-lyophilizate. Westar rats were administered oral doses equivalent to 40 mg kg−1 of NPX and blood samples were taken from the retro-orbital vein of rats at 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 6.0, 8.0 12.0, and 24.0 h post dosing. Co-lyophilization of NPX with QUE enhanced drug dissolution rate in the acidic medium, which was correlated with an increased QUE weight ratio in the co-lyophilizates. Rat stomachs from group V (NPX-QUE 1:2 co-lyophilizate) showed non-significant changes, and biopsies from this group showed no significant leukocyte infiltration and edema in the mucosa. The bioavailability of NPX-QUE 1: 2 co-lyophilizate was similar to the control sample. NPX-QUE 1: 2 co-lyophilizate could be an alternative to NPX in the treatment of arthritis as it minimizes the potential for gastric irritation and enhances safety while retaining the same efficacy and bioavailability.

The role of sodium alginate on the supersaturation state of the poorly soluble drug chlorthalidone

Solid dispersions (SDs) of chlorthalidone (CTD) are promising systems to enhance drug dissolution rate, generate and maintain drug supersaturation levels in gastrointestinal fluids. In this work, SDs of CTD were prepared by spray drying using sodium alginate (SA) as carrier. Six formulations were prepared, varying the drug loading and composition, through the combination of SA with surfactants (sodium lauryl sulfate (SLS) or polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (SOL)). In all SDs, except when SA was used alone at low drug loading, CTD was in the amorphous form. At sink conditions, all SDs showed a faster dissolution rate than the crystalline drug. At non-sink conditions, the SDs prepared with SA and SLS at low drug loading exhibited the best performance to maintain supersaturating drug levels. All SDs, except those prepared with SA alone or SA-SLS at high drug loading, presented no drug recrystallization after 34 months of storage.