ABSTRACTThe main aim of this investigation focuses on fabrication of copper surface composites through friction stir processing (FSP) reinforced with boron nitride (BN) particles of varying volume fractions (5%, 10%, and 15%). Surface composites developed through single pass FSP were characterized for its microstructural, mechanical and tribological properties. Microstructural characterization indicated that developed surface composites were of good quality with reduced grain size and the SEM characterization confirmed good bonding between copper matrix and BN with uniform dispersion. Micro hardness survey of the developed surface composites showcased minimal deviation in the stir zone with increased trend in respect to the volume fraction of BN. The ultimate tensile strength, yield strength and percent elongation of FSPed composites was found to have reduced when compared with that of pure copper. BN dispersion in surface composite was effective in reducing the ductility and so maximum volume percent (15%) of BN dispersed composite prompt to have higher strength. The wear rate and friction coefficient of the developed surface composite was found decreasing with respect to increase in the dispersion of BN. Amongst the FSPed copper surface composite, specimen with 15 vol% of BN has shown the least wear rate with low coefficient of friction.