Direction Of Linear Polarization Research Articles

Role of Pyramidal Low-Dimensional Semiconductors in Advancing the Field of Optoelectronics

Numerous optoelectronic devices based on low-dimensional nanostructures have been developed in recent years. Among these, pyramidal low-dimensional semiconductors (zero- and one-dimensional nanomaterials) have been favored in the field of optoelectronics. In this review, we discuss in detail the structures, preparation methods, band structures, electronic properties, and optoelectronic applications (photocatalysis, photoelectric detection, solar cells, light-emitting diodes, lasers, and optical quantum information processing) of pyramidal low-dimensional semiconductors and demonstrate their excellent photoelectric performances. More specifically, pyramidal semiconductor quantum dots (PSQDs) possess higher mobilities and longer lifetimes, which would be more suitable for photovoltaic devices requiring fast carrier transport. In addition, the linear polarization direction of exciton emission is easily controlled via the direction of magnetic field in PSQDs with C3v symmetry, so that all-optical multi-qubit gates based on electron spin as a quantum bit could be realized. Therefore, the use of PSQDs (e.g., InAs, GaN, InGaAs, and InGaN) as effective candidates for constructing optical quantum devices is examined due to the growing interest in optical quantum information processing. Pyramidal semiconductor nanorods (PSNRs) and pyramidal semiconductor nanowires (PSNWRs) also exhibit the more efficient separation of electron-hole pairs and strong light absorption effects, which are expected to be widely utilized in light-receiving devices. Finally, this review concludes with a summary of the current problems and suggestions for potential future research directions in the context of pyramidal low-dimensional semiconductors.

Controlling the polarization structure of vector beams synthesized by a fiber laser array

In our earlier paper [Adamov, E. V., Aksenov, V. P., Dudorov, V. V., Kolosov, V. V., & Levitskii, M. E. (2022). Controlling the spatial structure of vector beams synthesized by a fiber laser array. Optics & Laser Technology, 154, 108,351], we presented the method to control the spatial intensity distribution of a beam synthesized as a result of coherent combining of subbeams from an array of phase-controlled fiber radiation sources, each subbeam characterized by its own direction of linear polarization. In this paper, we consider theoretically and experimentally the feasibility of controlling the polarization structure of such synthesized beams by changing the phase relations between individual subbeams. It is shown that for fixed polarization directions of the subbeams, the nonuniform polarization distribution of the synthesized beam, whose character depends on the phase relations and polarization directions of the subbeams, can be controlled via a change of only subbeam phases.

Experimental characterization of a fully polarimetric pulsed terahertz spectroscopy system

A terahertz time domain pulsed spectroscopy system is modified to provide fully polarimetric radiation and analysis. The operation of this polarimetry system is characterized using a birefringent, x-cut quartz crystal. The modification is based on rotating the photoconductive antennas such that both the emitted and detected polarizations are out of the plane of incidence. Subsequently, broadband wire grid polarizers are used to select the incident and detected direction of linear polarization to be either parallel with (vertical) or perpendicular to (horizontal) the plane of incidence with the sample surface. The experiments are conducted in both transmission and reflection. Depending on the frequency, the phase retardation of the incoming electric field components along the two perpendicular optical axes of the quartz crystal changes differently. This results in the polarization of the light exiting the crystal changing with frequency. As a result, multiple frequencies are identified where the crystal behaves as a near ideal quarter-, half-, or full-wave retarder. Additionally, due to the time-domain nature of the experiment, transmitted and reflected electric fields are measured after multiple consecutive reflections within the crystal. This leads to a further, complex control over the final polarization state of the signal. Finally, images of a resolution standard are obtained demonstrating the characteristics of the polarimetry system.

Longitudinally variable 3D optical polarization structures.

Generation and manipulation of three-dimensional (3D) optical polarization structures have received considerable interest because of their distinctive optical features and potential applications. However, the realization of multiple 3D polarization structures in a queue along the light propagation direction has not yet been reported. We propose and experimentally demonstrate a metalens to create longitudinally variable 3D polarization knots. A single metalens can simultaneously generate three distinct 3D polarization knots, which are indirectly validated with a rotating polarizer. The 3D polarization profiles are dynamically modulated by manipulating the linear polarization direction of the incident light. We further showcase the 3D image steganography with the generated 3D polarization structures. The ultrathin nature of metasurfaces and unique properties of the developed metalenses hold promise for lightweight polarization systems applicable to areas such as 3D image steganography and virtual reality.

Creating tunable lateral optical forces through multipolar interplay in single nanowires

The concept of lateral optical force (LOF) is of general interest in optical manipulation as it releases the constraint of intensity gradient in tightly focused light, yet such a force is normally limited to exotic materials and/or complex light fields. Here, we report a general and controllable LOF in a nonchiral elongated nanoparticle illuminated by an obliquely incident plane wave. Through computational analysis, we reveal that the sign and magnitude of LOF can be tuned by multiple parameters of the particle (aspect ratio, material) and light (incident angle, direction of linear polarization, wavelength). The underlying physics is attributed to the multipolar interplay in the particle, leading to a reduction in symmetry. Direct experimental evidence of switchable LOF is captured by polarization-angle-controlled manipulation of single Ag nanowires using holographic optical tweezers. This work provides a minimalist paradigm to achieve interface-free LOF for optomechanical applications, such as optical sorting and light-driven micro/nanomotors.

The Most Sensitive SETI Observations Toward Barnard's Star with FAST

Search for extraterrestrial intelligence (SETI) has been mainly focused on nearby stars and their planets in recent years. Barnard’s star is the second closest star system to the Sun and the closest star in the Five-hundred-meter Aperture Spherical radio Telescope (FAST) observable sky which makes the minimum Equivalent Isotropic Radiated Power required for a hypothetical radio transmitter from Barnard’s star to be detected by FAST telescope a mere 4.36 × 108 W. In this paper, we present the FAST telescope as the most sensitive instrument for radio SETI observations toward nearby star systems and conduct a series of observations to Barnard’s star (GJ 699). By applying the multibeam coincidence matching strategy on the FAST telescope, we search for narrow-band signals (∼Hz) in the frequency range of 1.05–1.45 GHz, and two orthogonal linear polarization directions are recorded. Despite finding no evidence of radio technosignatures in our series of observations, we have developed predictions regarding the hypothetical extraterrestrial intelligence signal originating from Barnard’s star. These predictions are based on the star’s physical properties and our observation strategy.

Study of the velocity-selection satellites present in the () electric quadrupole transitions in atomic rubidium

This article presents detailed experimental and theoretical studies of the satellite fluorescence lines observed when the , (, ) electric quadrupole transition (E2) is excited in a room temperature vapor of rubidium atoms. The initial state of this E2 transition is prepared by a narrow linewidth (9 MHz) laser locked to one of the dominant D2 hyperfine excitations for zero-velocity atoms. Effects due to the selection of different atomic velocity classes in this preparation step are responsible for the presence of several satellite lines that can be found in the fluorescence decay spectra of both 85Rb and 87Rb. Compared to the main lines, these satellites do not show a strong dependence on the relative linear polarization directions of the lasers used in the preparation and the electric quadrupole steps. The relative intensities of the satellites decrease as the intensity of the preparation laser increases. Results of a rate equation calculation that explicitly includes selection-of-velocity effects indicate that optical pumping plays a central role in determining the relative intensities and the polarization dependence of the satellite lines. When the preparation laser is locked to the low-F cyclic transition in 87Rb, six lines were found in addition to the lone electric quadrupole transition for zero velocity atoms. In this case, the calculated spectrum is necessary for the correct interpretation of the experimental results, clearly indicating that optical pumping and selection of velocities are responsible for these six additional electric quadrupole lines.

Experimental demonstration of acoustically induced polarization-dependent fiber optical vortex inversion.

A recently proposed theoretical model of acousto-optic interaction in optical fibers with a traveling flexural acoustic wave of the fundamental order [M.A. Yavorsky, et al., Opt. Lett.44, 598 (2019)10.1364/OL.44.000598] is experimentally examined. We show the effect of inversion of topological charge of optical vortices, which is governed by the direction of incident linear polarization. This vector effect of a coupling of polarization and orbital degrees of freedom proves the inconsistency of the conventional microbending-based model and confirms the recently suggested approach of the description of acousto-optic interaction that is based on the actual displacement vector. In addition, the obtained results demonstrate the realization of a controlled-NOT gate for orbital angular momentum (OAM) states.

Fourier Transform Infrared Reflection Anisotropy Spectroscopy of Semiconductor Crystals and Structures: Development and Application in the Mid-Infrared.

A new method of reflection anisotropy spectroscopy (RAS) with increased mid-IR efficiency owing to the use of a Fourier transform infrared (FT-IR) spectrometer has been developed. An optical setup was implemented using a photoelastic modulator (PEM) to modulate the direction of linear polarization of the probe beam originating from the Michelson interferometer. An original measurement algorithm was proposed to eliminate the influence of spectral inhomogeneity of the PEM efficiency on the obtained spectra using appropriate calibration. It was shown that to preserve the sign of the RAS signal, it is necessary to use a specialized procedure for phase correction of the interferogram registered by the FT-IR spectrometer. In the visible range, good agreement was confirmed between the obtained reflection anisotropy (RA) spectra of a semiconductor crystal and the results of independent measurements using a conventional diffraction-grating spectrometer-based setup. The RA spectrum of a III-V semiconductor heterostructure in the mid-infrared range (λ up to 8 µm) is demonstrated. Application of the developed FT-IR RAS method to layered black phosphorus has enabled characterization of anisotropic interband transitions in this graphene-like semiconductor crystal.

Multibeam Blind Search of Targeted SETI Observations toward 33 Exoplanet Systems with FAST

The search for extraterrestrial intelligence (SETI) is to search for technosignatures associated with extraterrestrial life, such as engineered radio signals. In this paper, we apply the multibeam coincidence matching (MBCM) strategy, and propose a new search mode based on the MBCM which we call the MBCM blind search mode. In our recent targeted SETI research, 33 exoplanet systems are observed by the Five-hundred-meter Aperture Spherical radio Telescope (FAST). With this blind search mode, we search for narrowband drifting signals across 1.05–1.45 GHz in two orthogonal linear polarization directions separately. There are two special signals, one of which can only be detected by the blind search mode while the other can be found by both blind and targeted search modes. This result reveals huge advantages of the new blind search mode. However, we eliminate the possibility of the special signals being ETI signals based on much evidence, such as the polarization, drift, frequency, and beam coverage characteristics. Our observations achieve an unprecedented sensitivity and our work provides a deeper understanding to the polarization analysis of extraterrestrial signals.

Impact of anisotropic birefringence on measuring cosmic microwave background lensing

The power spectrum of cosmic microwave background lensing is a powerful tool for constraining fundamental physics such as the sum of neutrino masses and the dark energy equation of state. Current lensing measurements primarily come from distortions to the microwave background temperature field, but the polarization lensing signal will dominate upcoming experiments with greater sensitivity. Cosmic birefringence refers to the rotation of the linear polarization direction of microwave photons propagating from the last scattering surface to us, which can be induced by parity-violating physics such as axionlike dark matter or primordial magnetic fields. We find that, for an upcoming CMB-S4-like experiment, scale-invariant anisotropic birefringence with an amplitude corresponding to the current 95% upper bound can bias the measured lensing power spectrum by up to a factor of a few at small scales, $L\ensuremath{\gtrsim}1000$. We show that the bias scales linearly with the amplitude of the scale-invariant birefringence spectrum. The signal to noise of the contribution from anisotropic birefringence is larger than unity even if the birefringence amplitude decreases to around 5% of the current upper bound. Our results indicate that measurement and characterization of possible anisotropic birefringence is important for lensing analysis in future low-noise polarization experiments.

A Single-Layer Circularly Polarized Reflectarray Antenna with High Aperture Efficiency for Microwave Power Transmission

In this article, a single-layer circularly polarized reflectarray antenna (RA) with a linearly polarized feed is proposed for microwave power transmission. The unit cell of the reflectarray is composed of a rectangular patch surrounded by four groups of E-shaped structures, which feature a very low level of cross-polarization. Simulation results demonstrate that the phase of its reflection coefficient can be tuned continuously in a range of 500° by adjusting the lengths of the E-shaped structures. In response to a normally incident plane wave, the phase values of the reflection coefficient associated with two orthogonal linear polarization directions of the reflected wave can be tuned independently, which makes it possible to convert a linearly polarized incident wave to a circularly polarized beam. A reflectarray with 15 × 15 unit cells is fabricated and tested. The measurement results demonstrate a 3-dB axial ratio bandwidth of more than 2 GHz around the center frequency of 5.8 GHz. The measured gain value of the fabricated reflectarray is 25.4 dBi, corresponding to an aperture efficiency of 52.5%.

LCP /TLC based composite multi-dimensional polarization-dependent anti-counterfeiting device

Modern anti-counterfeiting technology can effectively suppress and combat forgery and counterfeiting behaviors, which is of great significance in information security, national defense and economy. However, the realization of multi-dimensional, integrated, difficult-to-copy and easy-to-detect optical anti-counterfeiting devices is still a challenge. In this paper, a multi-dimensional and polarization-dependent anti-counterfeiting device with structure color is designed, which is composed of patterned liquid crystal polymer (LCP) nematic layer and thermotropic cholesteric liquid crystal (TLC) layer. It has the advantages of displaying and hiding polarization states, wide color tuning range, convenient operation, high integration and security. For incident light with a specific polarization state, the patterned nematic phase LCP layer can carry out regionalized phase editing and polarization state modulation, while the TLC layer can selectively reflect the incident light. Therefore, a patterned structural color security label is subtly realized. The anti-counterfeiting device can realize the display, hiding, color adjustment and image/background conversion of patterns by adjusting the polarization direction of incident light. In addition, the TLC layer in the device can meet the application requirements of the anti-counterfeit device at different environmental temperatures through the flexible design of the system weight ratio. Furthermore, the device can be easily heated by body temperature, realize dynamic real-time wide-spectrum color modulation and reversible pattern erasure, and further enhance its security dimension and security. The multi-polarization-type anti-counterfeiting device has three-dimensional anti-counterfeiting efficacy. The first dimensional anti-counterfeiting efficacy is achieved by the thermochromic liquid crystal layer. The thermochromic liquid crystal layer has no reflection color outside the operating temperature range of TLC material, and the entire device displays black background. The second and the third dimensional anti-counterfeiting efficacy are related to the polarization state of the incident light and the linear polarization direction, respectively. Only when the incident light is linearly polarized light and its polarization direction makes an angle of 45° or –45° with respect to the optical axis of the liquid crystal, will the device show the designed pattern. Consequently, our proposed anti-counterfeiting device is expected to provide a new idea for developing the anti-counterfeiting field.

Complexity of the Upper Solar Atmosphere Revealed from Spectropolarimetry during a Solar Eclipse

We analyze linear polarimetric spectrum data of solar emission lines with different formation temperatures in a visible light band from 516.3–532.6 nm, obtained during the 2013 Gabon solar eclipse using the prototype Fiber Arrayed Solar Optical Telescope. Complexities are found from the chromosphere through the transition zone to the corona at the spatial resolution limit of 2″ and temporal resolution of seconds. The observations show irregular spatial and spectral variations in linear polarization amplitudes, directions, and profile shapes. Within the observational band, spectral lines with different formation temperatures can have comparable polarization amplitudes in one spatial volume but one order difference in another, and at the same spatial volume, the amplitudes can differ by one order at different lines. The polarization amplitudes do not consistently increase with elongation in local regions. The variation in the direction of the polarization along the elongation is found from the green coronal line and the transition zone line more frequently than from the chromospheric lines. Such a variation in orientation is not synchronous for the different lines. Finally, Stokes Q/I profiles of the broad lines, such as the magnesium triplet and the green coronal line, show very diverse and complicated patterns. After pixel binning, we show that some of the complexity may be caused by the integration over different polarization sources at subresolution scales and/or along the line of sight in the optically thin layers with complex geometric corrugations.

Sensitive Multibeam Targeted SETI Observations toward 33 Exoplanet Systems with FAST

As a major approach to looking for life beyond the Earth, the search for extraterrestrial intelligence (SETI) is committed to searching for technosignatures such as engineered radio signals that are indicative of technologically capable life. In this paper, we report a targeted SETI campaign employing an observation strategy named multibeam coincidence matching at the Five-hundred-meter Aperture Spherical radio Telescope toward 33 known exoplanet systems, searching for ETI narrowband drifting signals across 1.05–1.45 GHz in two orthogonal linear polarization directions separately. A signal at 1140.604 MHz detected from the observation toward Kepler-438 originally piqued our interest because its features are roughly consistent with assumed ETI technosignatures. However, evidences such as its polarization characteristics are able to eliminate the possibility of an extraterrestrial origin. Our observations achieve an unprecedented sensitivity because the minimum equivalent isotropic radiated power we are able to detect reaches 1.48 × 109 W.

Planck constraints on cross-correlations between anisotropic cosmic birefringence and CMB polarization

Cosmic Birefringence (CB) is the in-vacuo rotation of the linear polarization direction of photons during propagation, caused by parity-violating extensions of Maxwell electromagnetism. We build low resolution CB angle maps using Planck Legacy and NPIPE products and provide for the first time estimates of the cross-correlation spectra CL αE and CL αB between the CB and the CMB polarization fields. We also provide updated CB auto-correlation spectra CL αα as well as the cross-correlation CL αT with the CMB temperature field. We report constraints by defining the scale-invariant amplitudes AαX ≡ L(L + 1)CL αX /2π, where X = α, T, E, B, finding no evidence of CB. In particular, we find AαE = (-7.8 ± 5.6) nK deg and AαB = (0.3 ± 4.0) nK deg at 68% C.L..

Quasitrapped modes in metasurfaces of anisotropic MoS2 nanoparticles for absorption and polarization control in the telecom wavelength range

We investigate the resonant optical response of single material-anisotropic nanoparticles (NPs) of molybdenum disulfide (MoS$_2$) and their two-dimensional arrays (metasurfaces) irradiated by plane waves of the telecomunication optical range. Nanoparticles in the form of a disk with centered and shifted hole are considered. Using the recently experimental measured the MoS$_2$ dielectric permittivity and numerical calculations with analytical multipole analysis, we show that the material-anisotropy of NPs can lead to specific nonlocal contributions in their magnetic and electric dipole response and affect the effective dipole polarizabilities. Applying a special procedure we determine the period of the MoS$_2$ metasurfaces supporting the quasi-trapped mode (QTM) resonance around the tellecom wavelength of 1550 nm. It is shown that regardless extremely weak absorption of the single nanoparticles, the excitation of the QTM leads to effective narrowband absorption in the metasurfaces. Influences of the linear polarization direction of normally incident waves on the QTM implementation and the reflection and transmission spectra are studied. It is found and demonstrated, for the first time, that a metasurface, composed of the MoS$_2$ disks with their anisotropy perpendicularto the metasurface plane, has the properties of a continuous birefringent medium. Due to these properties, normally incident and linear-polarized waves can be transformed in the transmitted and reflected waves with changed polarizations.

Terahertz Metagrating Emitters with Beam Steering and Full Linear Polarization Control.

We report the realization of broadband THz plasmonic metagrating emitters for simultaneous beam steering and all-optical linear polarization control. Two types of metagratings are designed and experimentally demonstrated. First, the plasmonic meta-atoms are arranged in a metagrating with a binary phase modulation which results in the nonlinear generation of THz waves to the ±1 diffraction orders, with complete suppression of the zeroth order. Complete tunability of the diffracted THz linear polarization direction is demonstrated through simple rotation of the pump polarization. Then, the concept of lateral phase shift is introduced into the design of the metagratings using interlaced phase gradients. By controlling the spatial shift of the submetagrating, we are able to continuously control the linear polarization states of the generated THz waves. This method results in a higher nonlinear diffraction efficiency relative to binary phase modulation. These functional THz metagratings show exciting promise to meet the challenges associated with the current diverse array of applications utilizing THz technology.

Sharp focusing of beams with V-point polarization singularities

It is theoretically and numerically shown that when tightly focusing an n-th order vector light field that has the central V-point (at which the linear polarization direction is undetermined), the polarization singularity index n, and a "flower"-shaped intensity pattern with 2(n-1) lobes it forms a transverse intensity distribution with 2(n-1) local maxima. At the same time, a vector light field with the polarization singularity index -n, which has the form of a "web" with 2(n+1) cells generates at the sharp focus a transverse intensity distribution with 2(n+1) local maxima. In the focal spot, either 2(n-1) or 2(n+1) V-point polarization singularities with alternating indices +1 or -1 are formed at the intensity zero.

Linear polarization–direction correlations in $$\gamma $$-ray scattering experiments

Scattering measurements with incident linearly polarized $\gamma$ rays provide information on spins, parities, and $\gamma$-ray multipolarity mixing coefficients, and, therefore, on the nuclear matrix elements involved in the transitions. We present the general formalism for analyzing the observed angular correlations. The expressions are used to compute three-dimensional radiation patterns, which are important tools for optimizing experimental setups. Frequently, $\gamma$-ray transitions can proceed via two multipolarities that mix coherently. In such cases, the relative phases of the nuclear matrix elements are important when comparing results from different measurements. We discuss different phase conventions that have been used in the literature and present their relationships. Finally, we propose a basic experimental geometry consisting of detectors located at four different spatial locations. For this geometry, we present the measured anisotropies of the emitted $\gamma$ rays in graphical format as an aid in the data analysis.