Direct Measurement Research Articles

Lateral inhibition in V1 controls neural & perceptual contrast sensitivity.

Lateral inhibition is a central principle for sensory system function. It is thought to operate by the activation of inhibitory neurons that restrict the spatial spread of sensory excitation. Much work on the role of inhibition in sensory systems has focused on visual cortex; however, the neurons, computations, and mechanisms underlying cortical lateral inhibition remain debated, and its importance for visual perception remains unknown. Here, we tested how lateral inhibition from PV or SST neurons in mouse primary visual cortex (V1) modulates neural and perceptual sensitivity to stimulus contrast. Lateral inhibition from PV neurons reduced neural and perceptual sensitivity to visual contrast in a uniform subtractive manner, whereas lateral inhibition from SST neurons more effectively changed the slope (or gain) of neural and perceptual contrast sensitivity. A neural circuit model identified spatially extensive lateral projections from SST neurons as the key factor, and we confirmed this with anatomy and direct subthreshold measurements of a larger spatial footprint for SST versus PV lateral inhibition. Together, these results define cell-type specific computational roles for lateral inhibition in V1, and establish their unique consequences on sensitivity to contrast, a fundamental aspect of the visual world.

Super-Resolution Ultrasound Imaging for Monitoring the Therapeutic Efficacy of a Vascular Disrupting Agent in an Animal Model of Breast Cancer.

Evaluate the use of super-resolution ultrasound (SRUS) imaging for the early detection of tumor response to treatment using a vascular-disrupting agent (VDA). A population of 28 female nude athymic mice (Charles River Laboratories) were implanted with human breast cancer cells (MDA-MB-231, ATCC) in the mammary fat pad and allowed to grow. Ultrasound imaging was performed using a Vevo 3100 scanner (FUJIFILM VisualSonics Inc) equipped with the MX250 linear array transducer immediately before and after receiving bolus injections of a microbubble (MB) contrast agent (Definity, Lantheus Medical Imaging) via the tail vein. Following baseline ultrasound imaging, VDA drug (combretastatin A4 phosphate, CA4P, Sigma Aldrich) or control saline was injected via the placed catheter. After 4 or 24 hours, repeat ultrasound imaging along the same tumor cross-section occurred. Direct intratumoral pressure measurements were obtained using a calibrated sensor. All raw ultrasound data were saved for offline processing and SRUS image reconstruction using custom MATLAB software (MathWorks Inc). From a region encompassing the tumor space and the entire postprocessed ultrasound image sequence, time MB count (TMC) curves were generated in addition to traditional SRUS maps reflecting MB enumeration at each pixel location. Peak enhancement (PE) and wash-in rate (WIR) were extracted from these TMC curves. At termination, intratumoral microvessel density (MVD) was quantified using tomato lectin labeling of patent blood vessels. SRUS images exhibited a clear difference between control and treated tumors. While there was no difference in any group parameters at baseline (0 hour, P > .09), both SRUS-derived PE and WIR measurements in tumors treated with VDA exhibited significant decreases by 4 (P = .03 and P = .05, respectively) and 24 hours (P = .02 and P = .01, respectively), but not in control group tumors (P > .22). Similarly, SRUS derived microvascular maps were not different at baseline (P = .81), but measures of vessel density were lower in treated tumors at both 4 and 24 hours (P < .04). An inverse relationship between intratumoral pressure and both PE and WIR parameters were found in control tumors (R2 > .09, P < .03). SRUS imaging is a new modality for assessing tumor response to treatment using a VDA.

Hypoxia A Typical Target in Human Lung Cancer Therapy.

Lung cancer (LC) is the leading cause of cancer-related death globally. Comprehensive knowledge of the cellular and molecular etiology of LC is perilous for the development of active treatment approaches. Hypoxia in cancer is linked with malignancy, and its phenotype is implicated in the hypoxic reaction, which is being studied as a prospective cancer treatment target. The hypervascularization of the tumor is the main feature of human LC, and hypoxia is a major stimulator of neo-angiogenesis. It was seen that low oxygen levels in human LC are a critical aspect of this lethal illness. However, as there is a considerable body of literature espousing the presumed functional relevance of hypoxia in LC, the direct measurement of oxygen concentration in Human LC is yet to be determined. This narrative review aims to show the importance and as a future target for novel research studies that can lead to the perception of LC therapy in hypoxic malignancies.

Determining Changes in Muscle Size and Architecture After Exercise Training: One Site Does Not Fit all.

Nunes, JP, Blazevich, AJ, Schoenfeld, BJ, Kassiano, W, Costa, BDV, Ribeiro, AS, Nakamura, M, Nosaka, K, and Cyrino, ES. Determining changes in muscle size and architecture after exercise training: One site does not fit all. J Strength Cond Res 38(4): 787-790, 2024-Different methods can be used to assess muscle hypertrophy, but the effects of training on regional changes in muscle size can be detected only using direct muscle measurements such as muscle thickness, cross-sectional area, or volume. Importantly, muscle size increases vary across regions within and between muscles after resistance training programs (i.e., heterogeneous, or nonuniform, muscle hypertrophy). Muscle architectural changes, including fascicle length and pennation angle, after resistance and stretch training programs are also region-specific. In this paper, we show that the literature indicates that a single-site measure of muscle shape does not properly capture the effects achieved after exercise training interventions and that conclusions concerning the magnitude of muscle adaptations can vary substantially depending on the muscle site to be examined. Thus, we propose that measurements of muscle size and architecture should be completed at multiple sites across regions between the agonist muscles within a muscle group and along the length of the muscles to provide an adequate picture of training effects.

Short communication: Characterizing arterial and venous blood gases over the gas exchange surface, the chorioallantoic membrane, of embryonic American alligators (Alligator mississippiensis) at two points of development

Assessments of arterial and venous blood gases are required to understand the function of respiratory organs in animals at different stages of development. We measured blood gases in the arteries entering and veins leaving the chorioallantoic membrane (CAM) in embryonic alligators (Alligator mississippiensis). The CAM accounts for virtually all gas exchange in these animals, and we hypothesized that the CAM vasculature would be larger in eggs incubated in hypoxia (10% O2 for 50% or 70% of incubation), which would be reflected in a lower partial pressure of CO2 (PCO2). Contrary to this hypothesis, our measurements revealed no effects of hypoxic incubation on PCO2, and seemingly no increase in vascularization of the CAM in response to incubation in 10% O2. PCO2 was lower on the venous side, but only significantly different from arterial blood at 70% of incubation. The calculated blood flow to the CAM increased with development and was lower in both groups of alligators that had been incubated in hypoxia. Future studies should include measurements of blood parameters taken from embryos held in conditions that mirror incubation O2 levels, in combination with direct measurements of CAM artery blood flow.

Moiré Pattern Controlled Phonon Polarizer Based on Twisted Graphene.

Twisted van der Waals materials featuring Moiré patterns present new design possibilities and demonstrate unconventional behaviors in electrical, optical, spintronic, and superconducting properties. However, experimental exploration of thermal transport across Moiré patterns has not been as extensive, despite its critical role in nanoelectronics, thermal management, and energy technologies. Here, thefirst experimental study is conducted on thermal transport across twisted graphene, demonstrating a phonon polarizer concept from the rotational misalignment between stacked layers. The direct thermal and acoustic measurements,structural characterizations, and atomistic modeling, reveal a modulation up to 631% in thermal conductance with various Moiré angles, while maintaining a high acoustic transmission. By comparing experiments with density functional theory and molecular dynamics simulations, mode-dependent phonon transmissions are quantified based on the angle alignment of graphene band structures and attributed to the coupling among flexural phonon modes. The agreement confirms the dominant tuning mechanisms in adjusting phonon transmission from high-frequency thermal modes while having negligible effects on low-frequency acoustic modes near Brillouin zone center. This study offers crucial insights into the fundamental thermal transport in Moiré structures, opening avenues for the invention of quantum thermal devices and new design methodologies based on manipulations of vibrational band structures and phonon spectra.

Absolute and relative disparity mechanisms revealed by an equivalent noise analysis

The precision of stereopsis and vergence are ultimately limited by internal binocular disparity noise. Here we propose an equivalent noise model with both global and local internal disparity noises to provide a unified explanation of both absolute and relative disparity thresholds. To test this model, we developed a psychophysical procedure to measure the equivalent internal disparity noise by adding external disparity noise to random-Gabor-patch stereograms. We used the method of constant stimuli to measure the minimum and maximum disparity thresholds (Dmin and Dmax) for both absolute and relative disparity. Consistent with previous studies, we found that Dmin thresholds are substantially worse for absolute disparity than for relative disparity. We tested three relative disparity mechanisms: (1) the difference between the monocular separations of targets projecting to the two eyes; (2) the direct measurement of relative disparity; and (3) the difference of absolute disparities of targets. Computing the difference of absolute disparities when detecting relative disparity, Mechanism 3 cancels global noise, resulting in a much lower relative Dmin threshold, and provides a reasonable fit to the experimental data. We also found that the presence of as much as 2400 arcsec of external disparity noise does not appear to affect the Dmax threshold. This observation suggests that Dmax is implicated in a mechanism that disregards the disparity variance of individual items, relying instead on the average disparity across all items, supporting the depth model proposed in our previous study (Ding & Levi, 2021), which posits distinct mechanisms governing Dmin and Dmax thresholds.

Testing the discrepancy between physical and virtual linear measurements.

Virtual calculations of bone morphology are increasingly becoming the golden standard in anthropological sciences, gradually replacing the performance of direct physical measurements. Nevertheless, the potential discrepancy between the two approaches is rarely addressed. Here, we address this question focusing on the second thoracic vertebrae of 24 well-preserved individuals from the skeletal collection of the Forensic Anthropology Unit of Medical School at the National and Kapodistrian University of Athens, Greece. Following traditional osteometric methods, a series of measurements were taken on the vertebral body, both directly (using a digital caliper) as well as on high-resolution 3D surface models. The arithmetic results of the two measuring techniques were then compared through a number of statistical analyses evaluating inter-method precision (Bland-Altman plots, TEM, %TEM and Wilcoxon test). Moreover, the values obtained from each approach were used to develop discriminant function equations for sex determination to evaluate if both approaches provide the same assessment. Both intraobserver and interobserver tests were performed. Although most statistical analyses showed a significant difference between the two measuring techniques, the discriminant function equations for sex determination provided the same assessment. Overall, the results of this experiment support the use of virtual linear measurements, also suggesting that a refinement of digital measuring protocols could improve their level of agreement with traditional direct osteometry.

Effective gate length determination of AlGaN/GaN HEMTs from direct measurements of thermal signatures

Determining junction temperature and two-dimensional temperature profile is critical for high-power GaN-based high electron mobility transistors to optimize performance, improve device reliability, and better thermal management. Here, we have demonstrated that resistance temperature detectors of the same material as the gate contact delineated between gate-to-source and gate-to-drain regions can accurately profile the temperature along the channel. The temperature profile is asymmetric and skewed toward the drain side, and the degree of asymmetry is used to determine the effective gate length experimentally. A two-dimensional thermodynamic model along with drift-diffusion transport matches well with the experimental data, validating the temperature profile and effective channel length extraction under bias. The vertical depth profiling of the temperature is also determined by identifying the isothermal profile through the resistance temperature detectors. The isothermal lines are largely circular in the GaN region from isotropic two-dimensional heat diffusion, with the pinch-off region acting as a heating filament. The isothermal circular profile turns elliptical in the SiC substrate due to its higher thermal conductivity.

An Exploratory Pilot Study on the Application of Radiofrequency Ablation for Atrial Fibrillation Guided by Computed Tomography-Based 3D Printing Technology.

Radiofrequency ablation (RFA) is the treatment of choice for atrial fibrillation (AF). Additionally, the utilization of 3D printing for cardiac models offers an in-depth insight into cardiac anatomy and cardiovascular diseases. The study aims to evaluate the clinical utility and outcomes of RFA following in vitro visualization of the left atrium (LA) and pulmonary vein (PV) structures via 3D printing (3DP). Between November 2017 and April 2021, patients who underwent RFA at the First Affiliated Hospital of Xinxiang Medical University were consecutively enrolled and randomly allocated into two groups: the 3DP group and the control group, in a 1:1 ratio. Computed tomography angiography (CTA) was employed to capture the morphology and diameter of the LA and PV, which facilitated the construction of a 3D entity model. Additionally, surgical procedures were simulated using the 3D model. Parameters such as the duration of the procedure, complications, and rates of RFA recurrence were meticulously documented. Statistical analysis was performed using the t-test or Mann-Whitney U test to evaluate the differences between the groups, with a P-value of less than 0.05 considered statistically significant. In this study, a total of 122 patients were included, with 53 allocated to the 3DP group and 69 to the control group. The analysis of the morphological measurements of the LA and PV taken from the workstation or direct entity measurement showed no significant difference between the two groups (P > 0.05). However, patients in the 3DP group experienced significantly shorter RFA times (97.03 ± 28.39 compared to 120.51 ± 44.76min, t = 3.05, P = 0.003), reduced duration of radiation exposure (2.55 [interquartile range 2.01, 3.24] versus 3.20 [2.28, 3.91] min, Z = 3.23, P < 0.001), and shorter modeling times (7.68 ± 1.03 compared to 8.89 ± 1.45min, t = 5.38, P < 0.001). 3DP technology has the potential to enhance standard RFA practices by reducing the time required for intraoperative interventions and exposure to radiation.

Multiple regression analysis for competitive performance assessment of professional soccer players.

Being in peak physical condition and having specific motor abilities are necessity for every top-level soccer player in order to achieve success in competition. In order to correctly assess soccer players' performance, this research uses laboratory and field measurements, as well as results of competitive performance obtained by direct software measurements of players' movement during the actual soccer game. The main goal of this research is to give insight into the key abilities that soccer players need to have in order to perform in competitive tournaments. Besides training adjustments, this research also gives insight into what variables need to be tracked in order to accurately assess the efficiency and functionality of the players. The collected data need to be analyzed using descriptive statistics. Collected data is also used as input for multiple regression models that can predict certain key measurements: total distance covered, percent of effective movements and high index of effective performance movements. Most of the calculated regression models have high predictability level with statistically significant variables. Based on the results of regression analysis it can be deduced that motor abilities are important factor in measuring soccer player's competitive performance and team's success in the match.

Fixation method of a single muscle fiber by magnetic force for stretching, transportation, and evaluation of mechanical properties

Engineered muscle fibers are attracting interest in bio-actuator research as they can contribute to the fabrication of actuators with a high power/size ratio for micro-robots. These fibers require to be stretched during culture for functional regulation as actuators and require a fixation on a rigid substrate for stretching in culture and evaluation of mechanical properties, such as Young’s modulus and contraction force. However, the conventional fixation methods for muscle fibers have many restrictions as they are not repeatable and the connection between fixation part and the muscle fibers detaches during culture; therefore, the fixation becomes weak during culture, and direct measurement of the muscle fibers’ mechanical properties by a force sensor is difficult. Therefore, we propose a facile and repeatable fixation method for muscle fibers by mixing magnetite nanoparticles at both ends of the muscle fibers to fabricate magnetic ends. The fiber can be easily attached and detached repeatedly by manipulating a magnet that applies a magnetic force larger than 3 mN to the magnetic ends. Thus, the muscle fiber can be stretched fiber during culture for functional regulation, transported between the culture dish and measurement system, and directly connected to the force sensor for measurement with magnetic ends. The muscle fiber connected with magnetic ends have a long lifetime (∼4 weeks) and the cells inside had the morphology of a skeletal muscle. Moreover, the muscle fiber showed a contraction (specific force of 1.02 mN mm−2) synchronized with electrical stimulation, confirming the muscle fiber fabricated and cultured using our method had similar morphology and function as bio-actuators in previous research. This research demonstrates the advantages of the fixation method using muscle fibers with magnetic ends; the fibers are stretched during culture, and the transportation and force measurement of weak and tiny muscle fibers could be finished in 1 min.

Probabilistic characterisation of rock mass deformation modulus from P-wave velocity based on information criteria

ABSTRACT Determination of rock mass deformation modulus (Erm ) is an important but very challenging task in rock mechanics and rock engineering. Direct measurements of Erm by in-situ tests are expensive, time-consuming, and sometimes even impossible. Since the nondestructive and easy geophysical method is commonly used to measure the P-wave velocity (Vp ) in the field, the study has developed an empirical correlation between Erm and Vp based on 834 collected datasets by considering both inherent and transformation uncertainties. The information criteria are employed to select the best model for deriving a general empirical correlation. The maximum likelihood estimation (MLE) method and computational intelligence techniques like particle swarm optimisation (PSO), artificial bee colony (ABC), and differential evolution (DE) algorithms are used to specify the incorporated parameters of each candidate model. Based on the derived general empirical equation, a Bayesian equivalent sample approach using Markov Chain Monte Carlo (MCMC) simulation is applied to conduct probabilistic characterisation of Erm by combining prior knowledge and project-specific observed Vp data. Comparative studies of the results from theory and in-situ measured Erm values suggest that the proposed method is effective and validate the applicability of the derived general empirical correlation.

Direct and Continuous Monitoring of Multicomponent Antibiotic Gentamicin in Blood at Single-Molecule Resolution.

Point-of-care monitoring of small molecules in biofluids is crucial for clinical diagnosis and treatment. However, the inherent low degree of recognition of small molecules and the complex composition of biofluids present significant obstacles for current detection technologies. Although nanopore sensing excels in the analysis of small molecules, the direct detection of small molecules in complex biofluids remains a challenge. In this study, we present a method for sensing the small molecule drug gentamicin in whole blood based on the mechanosensitive channel of small conductance in Pseudomonas aeruginosa (PaMscS) nanopore. PaMscS can directly detect gentamicin and distinguish its main components with only a monomethyl difference. The 'molecular sieve' structure of PaMscS enables the direct measurement of gentamicin in human whole blood within 10 min. Furthermore, a continuous monitoring device constructed based on PaMscS achieved continuous monitoring of gentamicin in live rats for approximately 2.5 h without blood consumption, while the drug components can be analyzed in situ. This approach enables rapid and convenient drug monitoring with single-molecule level resolution, which can significantly lower the threshold for drug concentration monitoring and promote more efficient drug use. Moreover, this work also lays the foundation for the future development of continuous monitoring technology with single-molecule level resolution in the living body.

Impact of boundary conditions on the modeled thermal regime of the Antarctic ice sheet

Abstract. A realistic initialization of ice flow models is critical for predicting future changes in ice sheet mass balance and their associated contribution to sea level rise. The initial thermal state of an ice sheet is particularly important, as it controls ice viscosity and basal conditions, thereby influencing the overall ice velocity. Englacial and subglacial conditions, however, remain poorly understood due to insufficient direct measurements, which complicate the initialization and validation of thermal models. Here, we investigate the impact of using different geothermal heat flux (GHF) datasets and vertical velocity profiles on the thermal state of the Antarctic ice sheet and compare our modeled temperatures to in situ measurements from 15 boreholes. We find that the temperature profile is more sensitive to vertical velocity than to GHF. The basal temperature of grounded ice and the amount of basal melting are influenced by both selection of GHF and vertical velocity. More importantly, we find that the standard approach, which consists of combining basal sliding speed and incompressibility to derive vertical velocities, provides reasonably good results in fast-flow regions (ice velocity &gt;50 m yr−1) but performs poorly in slow-flow regions (ice velocity &lt;50 m yr−1). Furthermore, the modeled temperature profiles in ice streams, where bed geometry is generated using a mass conservation approach, show better agreement with observed borehole temperatures compared to kriging-based bed geometry.

Actuating droplets with electrowetting: Force and dynamics

AbstractElectrowetting on dielectric (EWOD) allows rapid movement of liquid droplets on a smooth surface, with applications ranging from lab‐on‐chip devices to micro‐actuators. The in‐plane force on a droplet is a key indicator of EWOD performance. This force has been extensively modeled but few direct experimental measurements are reported. We study the EWOD force on a droplet using two setups that allow, for the first time, the simultaneous measurement of force and contact angle, while imaging the droplet shape at 6000 frames/s. For several liquids and surfaces, we observe that the force saturates at a voltage of approximately 150 V. Application of voltages of up 2 kV, that is, 10 times higher than is typical, does not significantly increase forces beyond the saturation point. However, we observe that the transient dynamics, localized at the front contact line, do not show saturation with voltage. At the higher voltages, the initial front contact line speed continues to increase, the front contact angle temporarily becomes near zero, creating a thin liquid film, and capillary waves form at the liquid–air interface. When the localized EWOD forces at the contact line exceed the capillary forces, projectile droplets form. Increasing surface tension allows for higher droplet forces, which we demonstrate with mercury.

Bioelectronic Direct Current Stimulation at the Transition Between Reversible and Irreversible Charge Transfer.

Many biological processes rely on endogenous electric fields (EFs), including tissue regeneration, cell development, wound healing, and cancer metastasis. Mimicking these biological EFs by applying external direct current stimulation (DCS) is therefore the key to many new therapeutic strategies. During DCS, the charge transfer from electrode to tissue relies on a combination of reversible and irreversible electrochemical processes, which may generate toxic or bio-altering substances, including metal ions and reactive oxygen species (ROS). Poly(3,4-ethylenedioxythiophene) (PEDOT) based electrodes are emerging as suitable candidates for DCS to improve biocompatibility compared to metals. This work addresses whether PEDOT electrodes can be tailored to favor reversible biocompatible charge transfer. To this end, different PEDOT formulations and their respective back electrodes are studied using cyclic voltammetry, chronopotentiometry, and direct measurements of H2O2 and O2. This combination of electrochemical methods sheds light on the time dynamics of reversible and irreversible charge transfer and the relationship between capacitance and ROS generation. The results presented here show that although all electrode materials investigated generate ROS, the onset of ROS can be delayed by increasing the electrode's capacitance via PEDOT coating, which has implications for future bioelectronic devices that allow longer reversibly driven pulse durations during DCS.

Mendelian Randomization Study With Clinical Follow-Up Links Metabolites to Risk and Severity of Pulmonary Arterial Hypertension.

Pulmonary arterial hypertension (PAH) exhibits phenotypic heterogeneity and variable response to therapy. The metabolome has been implicated in the pathogenesis of PAH, but previous works have lacked power to implicate specific metabolites. Mendelian randomization (MR) is a method for causal inference between exposures and outcomes. Using genome-wide association study summary statistics, we implemented MR analysis to test for potential causal relationships between serum concentration of 575 metabolites and PAH. Five metabolites were causally associated with the risk of PAH after multiple testing correction. Next, we measured serum concentration of candidate metabolites in an independent clinical cohort of 449 patients with PAH to check whether metabolite concentrations are correlated with markers of disease severity. Of the 5 candidates nominated by our MR work, serine was negatively associated and homostachydrine was positively associated with clinical severity of PAH via direct measurement in this independent clinical cohort. Finally we used conditional and orthogonal approaches to explore the biology underlying our lead metabolites. Rare variant burden testing was carried out using whole exome sequencing data from 578 PAH cases and 361 675 controls. Multivariable MR is an extension of MR that uses a single set of instrumental single-nucleotide polymorphisms to measure multiple exposures; multivariable MR is used to determine interdependence between the effects of different exposures on a single outcome. Rare variant analysis demonstrated that loss-of-function mutations within activating transcription factor 4, a transcription factor responsible for upregulation of serine synthesis under conditions of serine starvation, are associated with higher risk for PAH. Homostachydrine is a xenobiotic metabolite that is structurally related to l-proline betaine, which has previously been linked to modulation of inflammation and tissue remodeling in PAH. Our multivariable MR analysis suggests that the effect of l-proline betaine is actually mediated indirectly via homostachydrine. Our data present a method for study of the metabolome in the context of PAH, and suggests several candidates for further evaluation and translational research.

Optical shift spectroscopy in two-dimensional materials

Optical beam shifts, such as the Goos–Hänchen (GH) shift and the Imbert–Fedorov (IF) shift, are fundamental optical phenomena. However, because these shifts are so minute, direct measurement is challenging, and obtaining an optical shift spectrum is even more difficult. Here, we successfully obtained GH and IF shift spectra using a beam displacement amplification technique. The optical shift spectrum of graphene shows very good agreement with the predicted results. Meanwhile, we observed two distinct peaks in the optical shift spectrum of WS2, corresponding to the A- and B-exciton transitions at the K-point in the Brillouin zone. More importantly, when graphene is stacked on WS2 to form a van der Waals heterostructure, the A-exciton characteristic of WS2 increases by an order of magnitude, which is essentially different from absorption and fluorescence spectra. Furthermore, refractive index change can be precisely captured by GH shift spectroscopy, which proves the optical shift spectrum to be an ideal candidate for a highly sensitive biosensor. Optical shift spectroscopy could enable new applications for nanophotonic devices and provide a platform for the study of intrinsic properties of two-dimensional materials, especially for van der Waals heterostructure.

Semantic analysis of two-syllabic terms of metrology. Part 1: The Types of measurements and methods of measurements

Two-syllabic terms of metrology are considered, which have become so firmly embedded in the mentality and practice of metrologists that the inadequacy of these terms manifests itself only when it is not possible to solve any important problem. Such a problem within the framework of the moment approach to estimating accuracy turned out to be the calculation of definitive uncertainty, and the term-phrase direct measurements causes a number of paradigmatic associations – indirect, cumulative, joint and other pseudomorphic measurements, similar in form of names and different in definition. But the errors of the results of these measurements can no longer be estimated in the same way as the errors of measuring instruments are estimated. The semantics of such two-syllabic terms is analyzed. The role of the direct and figurative meaning of the word measurement in the problem of the inadequacy of models is shown, the solution of which, within the framework of the compositional approach to assessing accuracy, is indicated by the word method before the two-syllabic names listed above. Bringing the term measuring problem into line with the semantics of the word problem has become the simplest correction of this terminological misunderstanding. At the same time, the inconsistency of the subordinate terms measurement method and method of solving the measurement problem has been eliminated.