Dipolar Groups Research Articles

Modeling Dipolar Molecules with PCP-SAFT: A Vector Group-Contribution Method.

Predicting thermodynamic equilibrium properties is essential to develop chemical and energy conversion processes in the absence of experimental data. For the modeling of thermodynamic properties, statistical associating fluid theory (SAFT)-based equations of state, such as perturbed-chain polar (PCP)-SAFT, have been proven powerful and found broad application. The PCP-SAFT parameters can be predicted by group-contribution (GC) methods. However, their application to the dipole term is substantially limited: current GC methods neglect the dipole term or only allow for a single dipolar group per substance to avoid handling the molecular dipole moment's symmetry effects. Still, substances with multiple dipolar groups are highly relevant, and their description substantially improves by including the dipole term in SAFT models. To overcome these limitations, this work proposes a vector-addition-based (Vector-)GC method for the dipole term of PCP-SAFT that accounts for molecular symmetry. The Vector-GC employs information on the substance's molecular 3D structure to predict the molecular dipole moment through a vector addition of bond contributions. Combining the proposed sum rule for dipole moments with established sum rules for the remaining parameters yields a consistent GC method for PCP-SAFT for dipolar substances. The prediction capabilities of the Vector-GC method are analyzed against experimental data for two substance classes: nonassociating oxygenated and halogenated substances. We demonstrate that the Vector-GC method improves vapor pressure and liquid density predictions compared to neglecting the dipole term. Moreover, we show that the Vector-GC method enables differentiation between cis- and trans-isomers. The Vector-GC method, hence, substantially increases the predictive capabilities and applicability domain of GC methods. All parameters are provided as JSON and CSV files, and the Vector-GC method is available through an open-source python package. Additionally, the developed regression framework for GC methods for PCP-SAFT is openly available. The regression framework can be employed to regress the Vector-GC method to other substance classes and is easily adaptable to other sum rules for PCP-SAFT.

Dipolar Microenvironment Engineering Enabled by Electron Beam Irradiation for Boosting Catalytic Performance.

Creating a diverse dipolar microenvironment around the active site is of great significance for the targeted induction of intermediate behaviors to achieve complicated chemical transformations. Herein, an efficient and general strategy is reported to construct hypercross-linked polymers (HCPs) equipped with tunable dipolar microenvironments by knitting arene monomers together with dipolar functional groups into porous network skeletons. Benefiting from the electron beam irradiation modification technique, the catalytic sites are anchored in an efficient way in the vicinity of the microenvironment, which effectively facilitates the processing of the reactants delivered to the catalytic sites. By varying the composition of the microenvironment scaffold structure, the contact and interaction behavior with the reaction participants can be tuned, thereby affecting the catalytic activity and selectivity. As a result, the framework catalysts produced in this way exhibit excellent catalytic performance in the synthesis of glycinate esters and indole derivatives. This manipulation is reminiscent of enzymatic catalysis, which adjusts the internal polarity environment and controls the output of products by altering the scaffold structure.

Dielectric response of metal-organic frameworks as a function of confined guest species investigated by molecular dynamics simulations.

When using metal-organic frameworks (MOFs) as electric field-dependent sensor devices, understanding their dielectric response is crucial as the orientation of polar groups is largely affected by confinement. To shed light on this at the molecular level, the response to a static field was computationally investigated for two structurally related MOFs, depending on their loading with guest molecules. The pillared-layer MOFs differ in their pillar moiety, with one bearing a rotatable permanent dipole moment and the other being non-polar. Two guest molecules with and without polarity, namely, methanol and methane, were considered. A comprehensive picture of the response of the guest molecules could be achieved with respect to both the amount and polarity of the confined species. For both MOFs, the dielectric response is very sensitive to the introduction of methanol, showing an anisotropic and non-linear increase in the system's relative permittivity expressed by a strongly increasing polarization response to external electric fields scaling with the number of confined methanol molecules. As expected, the effect of methane in the non-dipolar MOF is negligible, whereas subtle differences can be observed for the dipolar response of the MOF with rotatable dipolar linker groups. Taking advantage of these anisotropic and guest-molecule-specific confinement effects may open pathways for future sensing applications. Finally, methanol-induced global framework dynamics were observed in both MOFs.

Molecular Dynamics of Steroidal Rotors Probed by Theoretical, Spectroscopic and Dielectric Methods.

Our study focuses on molecular rotors with fast-moving rotators and their potential applications in the development of new amphidynamic crystals. Steroidal molecular rotors with a dipolar fluorine-substituted phenyl group as the rotator were synthesized and characterized. Three different rotors were investigated with varying numbers of fluorine atoms. A comprehensive analysis was performed using vibrational spectroscopy (Raman, FT-IR), electronic circular dichroism (ECD), and dielectric response to understand the behavior of the investigated model rotors. The results were supported by theoretical calculations using Density Functional Theory (DFT) methods. The angle-dependent polarized Raman spectra confirmed the crystallinity of the samples. Nearly frequency and temperature-independent permittivity suggest low-frequency librational motion of stators. An in-depth analysis of ECD spectra revealed high conformational flexibility in solution, resulting in low ECD effects, while in the solid-state with restricted rotation, significant ECD effects were observed. These findings shed light on the conformational behavior and potential applications of the studied steroidal molecular rotors.

Constructing Novel High Dielectric Constant Polyimides Containing Dipolar Pendant Groups with Enhanced Orientational Polarization.

Polymer dielectrics with high dielectric constant are urgently demanded for potential electrical and pulsed power applications. The design of polymers with side chains containing dipolar groups is considered an effective method for preparing materials with a high dielectric constant and low loss. This study synthesizes and comprehensively compare the dielectric properties of novel polyimides with side chains containing urea (BU-PI), carbamate (BC-PI), and sulfonyl (BS-PI) functional groups. The novel polyimides exhibit relatively high dielectric constant and low dielectric loss values due to the enhanced orientational polarization and suppressed dipole-dipole interactions of dipolar groups. In particular, BU-PI containing urea pendant groups presents the highest dielectric constant of 6.14 and reasonably low dielectric loss value of 0.0097. The strong γ transitions with low activation energies derived from dielectric spectroscopy measurements have been further evaluated to demonstrate the enhanced free rotational motion of urea pendant dipoles. In energy storage applications, BU-PI achieves a discharged energy density of 6.92 J cm-3 and a charge-discharge efficiency above 83% at 500 MV m-1. This study demonstrates that urea group, as dipolar pendant group, can provide polymers with better dielectric properties than the most commonly used sulfonyl groups.

Tunable gas selectivity of cellulose nanocrystals – Polyethylene glycol composite membranes

The kinetics of the CO2, D2 and CH4 transport through self-supporting cellulose nanocrystals (CNCs) films containing low-molecular weight poly(ethylene glycol) (PEG) additive as plasticizer agent was studied in single gas condition at 293 K and sub-atmospheric feed pressure. Neat CNC and PEG-CNC with 7 wt % PEG films act as impermeable barrier for CO2 and CH4 and exhibit D2 permeability values not larger than 0.05 barrer with penetrant diffusivity in the 10−10 cm2/s range. PEG addition at larger contents improves the permeability and diffusivity of all penetrant gases and gives to the PEG-CNC membrane a CO2 selective character. The CO2 permeability and ideal CO2/D2 selectivity of the PEG-CNC films are 0.42 ± 0.04 barrer and ∼3, respectively, at 14 wt % PEG content, 2.5 ± 0.2 barrer and ∼5 at 21 wt % PEG. The preferred CO2 transport exhibits a solution-selective character being the D2 diffusivity a factor ∼10 larger than the CO2 diffusivity. PEG addition, on the contrary, does not change the D2 selective character for the D2/CH4 gas couple. PEG well mixed with the gas-impermeable CNCs increases the PEG-CNC free volume and preferentially improves the CO2 solubility given the specific interactions between the quadrupolar CO2 penetrant and the dipolar ether groups of the PEG additive.

Improving electron transportation and operational lifetime of full color organic light emitting diodes through a "weak hydrogen bonding cage" structure.

Efficient electron-transporting materials (ETMs) are critical to achieving excellent performance of organic light-emitting diodes (OLEDs), yet developing such materials remains a major long-term challenge, particularly ETMs with high electron mobilities (μeles). Herein, we report a short conjugated ETM molecule (PICN) with a dipolar phenanthroimidazole group, which exhibits an electron mobility of up to 1.52 × 10-4 cm2 (V-1 s-1). The origin of this high μele is long-ranged, regulated special cage-like interactions with C-H⋯N radii, which are also favorable for the excellent efficiency stability and operational stability in OLEDs. It is worth noting that the green phosphorescent OLED operation half-lifetimes can reach up to 630 h under unencapsulation, which is 20 times longer than that based on the commonly used commercial ETM TPBi.

Exploring the Impact of Intermolecular Interactions on the Glassy Phase Formation of Twist-Bend Liquid Crystal Dimers: Insights from Dielectric Studies

The formation of the nematic to twist-bend nematic (NTB) phase has emerged as a fascinating phenomenon in the field of supramolecular chemistry, based on complex intermolecular interactions. Through a careful analysis of molecular structures and dynamics, we elucidate how these intermolecular interactions drive the complex twist-bend modulation observed in the NTB. The study employs broadband dielectric spectroscopy spanning frequencies from 10 to 2 × 109 Hz to investigate the molecular orientational dynamics within the glass-forming thioether-linked cyanobiphenyl liquid crystal dimers, namely, CBSC7SCB and CBSC7OCB. The experimental findings align with theoretical expectations, revealing the presence of two distinct relaxation processes contributing to the dielectric permittivity of these dimers. The low-frequency relaxation mode is attributed to an “end-over-end rotation” of the dipolar groups parallel to the director. The high-frequency relaxation mode is associated with precessional motions of the dipolar groups about the director. Various models are employed to describe the temperature-dependent behavior of the relaxation times for both modes. Particularly, the critical-like description via the dynamic scaling model seems to give not only quite good numerical fittings, but also provides a consistent physical picture of the orientational dynamics in accordance with findings from infrared (IR) spectroscopy. Here, as the longitudinal correlations of dipoles intensify, the m1 mode experiences a sudden upsurge in enthalpy, while the m2 mode undergoes continuous changes, displaying critical mode coupling behavior. Interestingly, both types of molecular motion exhibit a strong cooperative interplay within the lower temperature range of the NTB phase, evolving in tandem as the material’s temperature approaches the glass transition point. Consequently, both molecular motions converge to determine the glassy dynamics, characterized by a shared glass transition temperature, Tg.

Achieving High Permittivity Paraelectric Behavior in Mesogen-Free Sulfonylated Chiral Polyethers with Smectic C Liquid Crystalline Self-Assembly

Ferroelectric liquid crystalline polymers (LCPs) with a high spontaneous polarization (Ps) are of great interest for the fabrication of advanced electronic devices. However, conventional ferroelectric LCPs typically exhibit low spontaneous polarization, only around 1 mC/m2. To increase the orientational polarization for ferroelectric LCPs, in this work, we designed mesogen-free comb-shaped LCPs based on isotactic polyepichlorohydrin, which contained highly dipolar sulfonyl groups (dipole moment of 4.5 Debye) in the side chains. The goal was to increase dipole density and induce ferroelectric switching. In this new series of mesogen-free LCPs, the sulfonyl groups were first moved away from the main chain to mitigate strong dipole–dipole interactions. Second, methyl-branched alkyl side chains were implemented to decrease the crystallizability and induce the Smectic C (SmC) self-assembly. Intriguingly, these SmC samples, for the first time, exhibited typical paraelectric behavior (i.e., slim S-shaped single hysteresis loops) with a high dielectric constant in the range of 20–30. Learning from the knowledge obtained from this study, we will be able to design new mesogen-free LCPs with tailor-made dipole–dipole interactions and realize ferroelectricity.

Fully solution-processed carbon nanotubes thin film transistors and PMOS inverters on glass substrate

We report fully solution-processed thin film transistors and PMOS inverters fabricated on glass substrates using single-walled carbon nanotubes (SWCNTs) as active semiconducting material. All the electrodes (gate, source, and drain) were inkjet-printed using silver (Ag) as conductive ink. Spin coated poly-4-vinylphenol dielectric was optimized in terms of thickness and heating conditions for solution-processed SWCNTs thin film transistors to achieve a mobility equal to 0.81 cm2 V−1s−1. We will show that, hole traps at the dielectric-semiconductor interface are responsible for the hysteresis in the transfer curve, and controlled by the different sweep rate of the gate field. Drain-current transients under different bias conditions were studied and the increase in current occurs due to slow polarizations of residual dipolar groups in the dielectric. The adopted technology has been exploited to fabricate a PMOS inverter and studied for high gain and noise margin values at the supply voltage, V DD = −40 V.

Anomalous diffusion, gigahertz, and terahertz spectroscopy of aliphatic ketones.

The experimental results of the complex dielectric permittivity of aliphatic ketones in dilute solutions of inert solvent cyclohexane in the gigahertz (GHz) and terahertz (THz) frequencies of the electromagnetic spectrum are examined in terms of the theory of inertial anomalous diffusion of polar molecules, considered as an assembly of molecules with interacting dipolar groups, in polar liquids. The theory is based on the generalization of the Debye rotational diffusion model of dielectric relaxation of polar molecules. The model comprises two interacting dipolar groups-one lighter and the other heavier; each has a finite moment of inertia and each experiences a finite friction with an extensive range of damping or drag coefficient and the dipole moment ratio of the two groups. The lighter group refers to the reference molecule, whereas the heavier group simulates the neighboring molecules, and the two groups interact with each other via the dipole-dipole interaction potential. The resulting approximate expression contains terms in both the Rocard form and the Сole-Сole form. The experimental data on aliphatic ketones are shown to fit extremely well with the theory, and parameters of the fit offer physical significance. An agreement of the plot of the experimental data on dielectric loss versus frequency to the formulas derived from the model offers a mathematical basis of the semiempirical equations used in the literature to fit the experimental data. Experimental results of the dielectric loss of neat polar liquid acetone in GHz and THz, as an example, are shown to fit the theory; however, the interaction potential parameter compared to its dilute solution counterpart is significantly increased, reflecting the increase in the dipole-dipole interaction energy.

Scalable Ultrathin All-Organic Polymer Dielectric Films for High-Temperature Capacitive Energy Storage.

The miniaturization of electronic devices and power systems for capacitive energy storage under harsh environments requires scalable high-quality ultrathin high-temperature dielectric films. To meet the need, ultrasonic spray-coating (USC) can be used. Novel polyimides with a dipolar group, CF3 (F-PI), and all-organic composites with trace organic semiconductor can serve as models. These scalable high-quality ultrathin films (≈2.6 and ≈5.2µm) are successfully fabricated via USC. The high quality of the films is evaluated from the micro-millimeter scale to the sub-millimeter and above. The high glass transition temperature Tg (≈340 °C) and concurrent large bandgap Eg (≈3.53eV) induced by weak conjugation from considerable interchain distance (≈6.2 Å) enable F-PI to be an excellent matrix delivering a discharge energy density with 90% discharge efficiency Uη90 of 2.85 J cm-3 at 200 °C. Further, the incorporation of a trace organic semiconductor leads to a record Uη90 of ≈4.39 J cm-3 at 200 °C due to the markedly enhanced breakdown strength caused by deep charge traps of ≈2eV. Also, a USC-fabricated multilayer F-PI foil capacitor with ≈85nF (six layers) has good performance at 150 °C. These results confirm that USC is an excellent technology to fabricate high-quality ultrathin dielectric films and capacitors.

Side-Chain-Type High Dielectric-Constant Dipolar Polyimides with Temperature Resistance.

Innovative dielectric materials with high-temperature resistance and outstanding dielectric properties have attracted tremendous attention in advanced electronical fields. Polyimide(PI) is considered a promising candidate for the modern electronic industry due to its excellent dielectric properties and comprehensive properties. However, the limited-adjustable range of dielectric constant and the difficulty to obtain a high dielectric constant restrict the application of PI as high dielectric materials. Herein, a novel diamine monomer (2,2'-bis((methylsulfonyl)methyl)-[1,1'-biphenyl]-4,4'-diamine (BSBPA)) containing a rigid biphenyl structure and high dipolar sulfonyl pendant groups is designed for high dielectric polyimides. The rigid biphenyl and polar sulfonyl pendant groups can reasonably optimize the molecular structure and orientational polarization of polyimides to improve their dielectric properties and thermal properties. Moreover, the effect of different bridge linkages on the dielectric properties is studied by using the different dianhydrides. Thus, the PI-BSBPA films especially the DSDA-BSBPA film (DSDA: 3,3',4,4'-diphenylsulfonetetracarboxylic dianhydride)achieve great thermal properties (T5%d of 377°C and Tg of 358°C) and excellent dielectric properties (6.95 at 1kHz) along with high discharged energy density of 5.25Jcm-3 and charge-discharge efficiency of 90%. The collaborative control of main-chain and side-chain engineering is effective to endow the polyimides with high-temperature tolerance and high dielectric performance.

High‐κ and High‐Temperature Dipolar Glass Polymers Based on Sulfonylated and Cyanolated Poly(Arylene Ether)s for Capacitive Energy Storage

AbstractHigh energy density, high temperature, and low loss dielectric polymers have drawn increasing attention in research owing to their potential applications in power electronic and pulsed power devices. In this study, a new class of organo‐soluble dipolar glass polymers (DGPs) are synthesized via polycondensation and post‐functionalization of poly(aryl ether)s (PAEs) based on phenolphthalin. Due to the nonplanar backbone structure, the strongly dipolar side groups (‐SO2CH3 and ‐CH2CH2CN) can easily rotate in these PAEs. As a result, desirable physical properties are obtained: high dielectric constant (4.4–5.6), high glass transition temperature (155–180 °C), good mechanical property, and low dielectric loss (dissipation factor < 0.005). Among them, cyanolized poly(aryl ether nitrile) exhibit the highest discharged energy density of 8.6 J cm−3 at 650 MV m−1 and room temperature with a high discharged efficiency of 94.3%. At 100 °C, cyanolized poly(ether ether ketone) shows the highest discharged energy density of 7.3 J cm−3 at 600 MV m−1 with a discharged efficiency of 91%. Furthermore, these functionalized PAEs exhibit good mechanical toughness with a tensile strength at a break of 60‐120 MPa and elongation at a break of ≈5%. Based on their thermal, mechanical, and dielectric properties, these phenolphthalin‐based PAEs are promising for potential applications such as film capacitors.

Concept of Embedded Dipoles as a Versatile Tool for Surface Engineering.

ConspectusControlling the physical and chemical properties of surfaces and interfaces is of fundamental relevance in various areas of physical chemistry and a key issue of modern nanotechnology. A highly promising strategy for achieving that control is the use of self-assembled monolayers (SAMs), which are ordered arrays of rodlike molecules bound to the substrate by a suitable anchoring group and carrying a functional tail group at the other end of the molecular backbone. Besides various other applications, SAMs are frequently used in organic electronics for the electrostatic engineering of interfaces by controlling the interfacial level alignment. This is usually achieved by introducing a dipolar tail group at the SAM–semiconductor interface. Such an approach, however, also changes the chemical character of that interface, for example, affecting the growth of subsequent layers. A strategy for avoiding this complication is to embed polar groups into the backbones of the SAM-forming molecules. This allows disentangling electronic interface engineering and the nucleation of further layers, such that both can be optimized independently. This novel concept was successfully demonstrated for both aliphatic and aromatic SAMs on different application-relevant substrates, such as gold, silver, and indium tin oxide. Embedding, for example, ester and pyrimidine groups in different orientations into the backbones of the SAM-forming molecules results in significant work-function changes. These can then be fine-tuned over a wide energy range by growing mixed monolayers consisting of molecules with oppositely oriented polar groups. In such systems, the variation of the work function is accompanied by pronounced shifts of the peaks in X-ray photoelectron spectra, which demonstrates that electrostatically triggered core-level shifts can be as important as the well-established chemical shifts. This illustrates the potential of X-ray photoelectron spectroscopy (XPS) as a tool for probing the local electrostatic energy within monolayers and, in systems like the ones studied here, makes XPS a powerful tool for studying the composition and morphology of binary SAMs. All these experimental observations can be rationalized through simulations, which show that the assemblies of embedded dipolar groups introduce a potential discontinuity within the monolayer, shifting the energy levels above and below the dipoles relative to each other. In molecular and monolayer electronics, embedded-dipole SAMs can be used to control transition voltages and current rectification. In devices based on organic and 2D semiconductors, such as MoS2, they can reduce contact resistances by several orders of magnitude without adversely affecting film growth even on flexible substrates. By varying the orientation of the embedded dipolar moieties, it is also possible to build p- and n-type organic transistors using the same electrode materials (Au). The extensions of the embedded-dipole concept from hybrid interfaces to systems such as metal–organic frameworks is currently underway, which further underlines the high potential of this approach.

Significant improvements in the electromechanical performance of dielectric elastomers by introducing ternary dipolar groups

Dielectric elastomers are intelligent materials, which can be deformed under electric field stimulation and show a variety of application prospects in the fields of intelligent robots and bionic materials. However, traditional dielectric elastomers commonly require high driving field, which severely restricts their applications. Herein, a new type of polyacrylate elastomeric material containing three types of dipolar groups (ester, hydroxyl, and carbamate) is designed, which significantly contribute to the enhanced dielectric constant, and the elastic modulus is optimized by adjusting the amount of crosslinking agent. 2-Hydroxyethyl acrylate (HEA), which contains a hydroxyl group, is used as the monomer to prepare poly(2-hydroxyethyl acrylate) (PHEA), and diphenylmethane diisocyanate (MDI) is used as the crosslinking agent to form a series of PHEA@MDI elastomer films. The synthesized elastomers possess both a high dielectric constant (22.2 at 100 Hz) and a large actuation performance (19.2% at 10 MV/m). This work provides a new strategy for fabricating high performance dielectric elastomers.

Adsorption of uremic toxins using biochar for dialysate regeneration.

Numerous studies have shown that patients with COVID-19 have a high incidence of renal dysfunction. However, the dialysis supplies, including dialysates, are also severely inadequate in hospitals at the pandemic centers. Therefore, there is an urgent need to develop materials that can efficiently and rapidly remove toxins and thus regenerate dialysate to make this vital resource remains readily available. In this work, by simple carbonization and activation treatment, the porous activated carbon from waste rubber seed shell (RAC) was prepared. The adsorption results showed that the maximum adsorption capacities of the obtained RAC for creatinine and uric acid were 430 mg/g and 504 mg/g, respectively. Significantly, the adsorption process can be close to the equilibrium state within 0.5 h, which proved the ultra-fast adsorption response capacity of RAC. Further, the thermodynamics analysis results showed that both the creatinine and uric acid adsorption processes were monolayer, exothermic, and spontaneous. The adsorption kinetics results indicated that the adsorption process of the two uremic toxins followed the pseudo-second-order rate model and was dominated by chemisorption. The instrument analysis results reflected the efficient adsorption of the RAC for the above uremic toxins which might be due to the dipole–dipole interaction between the dipolar oxygen-containing groups of the surface of RAC and the dipoles of the toxins. Moreover, the formed hydrogen bonds between the oxygen groups and the toxins also played an important role. In all, the as-prepared RAC has the potential to efficiently remove major toxins from the dialysate and can be used in in vitro dialysis of numerous patients during the current COVID-19 pandemic.

Contribution of dipolar bridging to phospholipid membrane interactions: A mean-field analysis.

We develop a model of interacting zwitterionic membranes with rotating surface dipoles immersed in a monovalent salt and implement it in a field theoretic formalism. In the mean-field regime of monovalent salt, the electrostatic forces between the membranes are characterized by a non-uniform trend: at large membrane separations, the interfacial dipoles on the opposing sides behave as like-charge cations and give rise to repulsive membrane interactions; at short membrane separations, the anionic field induced by the dipolar phosphate groups sets the behavior in the intermembrane region. The attraction of the cationic nitrogens in the dipolar lipid headgroups leads to the adhesion of the membrane surfaces via dipolar bridging. The underlying competition between the opposing field components of the individual dipolar charges leads to the non-uniform salt ion affinity of the zwitterionic membrane with respect to the separation distance; large inter-membrane separations imply anionic excess, while small nanometer-sized separations favor cationic excess. This complex ionic selectivity of zwitterionic membranes may have relevant repercussions on nanofiltration and nanofluidic transport techniques.

Enabling large actuated strain at low electric field by grafting cyanoester dipoles onto a poly(styrene-b-butadiene-b-styrene) elastomer using thiol-ene click chemistry

A dielectric elastomer can undergo a large deformation when it is subjected to an applied electric field. As a result, it finds potential usage in artificial muscles, soft robotics, and medical devices. However, current dielectric elastomers suffer from low dielectric constants (e.g., <4.5). Grafting highly dipolar groups onto a dielectric elastomer has been proved to be an efficient method to improve the dielectric constant and thus the electroactuation property. However, grafting a side chain bearing two or more dipolar groups onto the polymer main chain has not been explored in the past. In this work, we grafted cyanoester groups onto a poly (styrene-b-butadiene-b-styrene) (SBS) elastomer to improve its dielectric constant and actuation performance using the thiol-ene click reaction. A series of new dielectric elastomers with different grafting densities were obtained with excellent actuation properties: a dielectric constant up to 11.6 at 105 Hz and a large actuation strain of 9% at a low field of 13.9 MV/m. This work provides us a new and effective strategy to improve the performance of dielectric elastomers.

Effect of chemical treatments on polarization and dielectric properties of Kumpang wood reinforced epoxy composite

The polarization process, such as orientational, space charge, atomic and electronic polarization, were studied for the wood reinforced epoxy composites with different fiber weight percentages, chemical modification, and frequencies from a range of 100 Hz to 2 MHz, respectively. The dielectric test for all composite samples was conducted to identify the composite's dielectric properties to investigate the behaviors and contribution of the polarization process at different conditions. The composite's permittivity was increasing as the fiber content increasing in which this increase was high at low, medium frequencies due to interfaces and orientation polarization and low at high frequencies, which could be the reason for decreasing interfacial and orientational polarization. The increase in fiber content resulted in higher dipolar groups in the material, enhancing orientational polarization. The chemical treatments reduced the water content and strong interface bonding; hence less orientation and interfacial polarization were observed. It was evident that the frequency, fiber content, and chemical treatments directly affect the dielectric properties with an increase of 39 percent from fibers' addition. The highest observed permittivity was 3.68, which is appropriate for the low-k dielectric application, and the lowest loss observed was 0.098 observed at 20 wt% fiber loading.