Dioxin-like Polychlorinated Biphenyls Research Articles

Resveratrol ameliorates ortho- polychlorinated biphenyls' induced toxicity in ovary cells.

Polychlorinated biphenyls (PCBs) can induce chronic oxidative stress, inflammation, and cell death, leading to coronary heart disease, endothelial dysfunction, neurotoxicity, cancer, obesity, type 2 diabetes, reproductive dysfunction, etc. The aim of this study was to investigate possible protective effect of resveratrol (2.5-20μM) in ovarian cells exposed to PCBs. An emphasis was on identifying mechanisms of resveratrol action upon distinct structure of the individual PCB congener-planar dioxin-like PCB 77 and non-planar di-ortho-substituted PCB 153. Multiple toxicity endpoint analysis was performed. Cell viability/proliferation was assessed by Trypan Blue exclusion method, Neutral Red, Kenacid Blue, and MTT bioassays. The level of oxidative stress was measured by fluorescent probes, and flow cytometry was applied to evaluate the mode of cell death. Resveratrol applied alone did not affect cell proliferation and viability in doses up to 20µM, although significant antioxidative activity was observed. Toxic effects of ortho-PCB 153 (cytotoxicity, oxidative stress, and cell death) were mitigated by resveratrol. On the contrary pre-incubation with resveratrol did not result in cell viability protection when planar PCB 77 was applied. This indicates that resveratrol efficacy may be linked to specific structure of the individual congener, suggesting nutritional modulation of environmental insults caused by ortho-PCBs. We point out the importance of resveratrol dosage considering that synergistic cytotoxic effect with both PCB congeners is observed at concentrations ≥ 10μM.

PCDD/F and DL-PCB exposure among residents upwind and downwind of municipal solid waste incinerators and source identification

Understanding the environmental and human impacts associated with polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) exposure from municipal solid waste incinerators (MSWIs) is challenging because information on ambient and dietary exposure levels, spatial characteristics, and potential exposure routes is limited. In this study, 20 households from two villages located on the upwind and downwind sides of a MSWI were selected to characterize the concentration and spatial distribution of PCDD/F and DL-PCB compounds in ambient and food samples, such as dust, air, soil, chicken, egg, and rice samples. The source of exposure was identified using congener profiles and principal component analysis. Overall, the dust and rice samples had the highest and lowest mean dioxin concentrations, respectively. Significant differences were observed (p < 0.01) in PCDD/F concentrations in chicken samples and DL-PCB concentrations in rice and air samples between the upwind and downwind villages. The exposure assessment indicated that the primary risk source was dietary exposure, especially from eggs, which had a PCDD/F toxic equivalency (TEQ) range of 0.31–14.38 pg TEQ/kg body weight (bw)/day, leading to adults in one household and children in two households exceeding the World Health Organization-defined threshold of 4 pg TEQ/kg bw/day. Chicken was the main contributor to the differences between upwind and downwind exposure. Based on the established congener profiles, the exposure routes of PCDD/Fs and DL-PCBs from the environment to food to humans were clarified.

Decontamination of recycled LDPE using different washing methods

Post-consumer low density polyethylene samples were analysed for PAHs, PCDD/Fs and dioxin-like PCBs content. Subsequently, various treatments were applied to determine a process capable of decontaminating the plastic samples: extraction with polyethylene glycol at different temperatures with and without agitation; extraction using subcritical and hot water at different temperatures in a basic medium; compound degradation by ultraviolet radiation; and compound degradation by advanced oxidation processes using H2O2. The most effective treatment was extraction with polyethylene glycol (agitated) at 120 °C, reducing contamination by 89%, 85% and 95% of PAHs, PCDD/Fs, and dioxin-like PCBs, respectively. The least effective treatments (subcritical and hot water), maximum reductions of 47% and 19% of PAHs were obtained for the temperatures of 160 °C and 90 °C. UV oxidation increased the toxic equivalency of the samples (calculated using the toxicity equivalency factors) by up to 1400%, through the co-formation of the most toxic congeners, e.g., the non-ortho PCBs

Full replacement of fish oil with algae oil in farmed Atlantic salmon (Salmo salar) – Debottlenecking omega 3

The global goal of developing sustainable aquafeed has faced increased complexity in sourcing raw materials. The limited availability of fish oil (FO) is a well-known bottleneck for the aquaculture industry and pairing it with EFSA (EFSA CONTAM, 2018) reduced tolerable weekly intake of marine contaminants [polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) and dioxin-like polychlorinated biphenyls (DLPCB)] creates another challenge for wild caught FO and its use in fish feed. In recent years, commercial algal alternatives have increasingly become available. Not only would omega-3 sources from algae reduce the reliance on FO; it would allow for restoration of the long chain omega-3 levels in farmed salmon. To this end, a study was conducted to establish knowledge on full replacement of FO by algae oil (Schizochytrium sp.) in Atlantic salmon with the aim of reducing contaminants levels in the fillet and maintaining the level of omega-3 fatty acid (FA), growth performance, health, and final product quality. Atlantic salmon (531 g) were distributed into twelve 5 × 5 × 5 m sea cages and fed one of four diets for 369 days: a control diet (Control) containing FO + rapeseed oil (VO1); a diet where AlgaPrime (AP) replaced 50% of the sum of EPA + DHA from FO (50AP + VO1); a diet where AP replaced 100% of the sum of EPA + DHA from FO (100AP + VO1), and a diet the same as the previous but using linseed instead of rapeseed oil (VO2; 100AP + VO2). All diets were balanced for key micronutrients. At the end of the trial, zootechnical parameters were obtained, health and welfare assessed, and final fillet quality analysed for contaminants and fillet quality post slaughter. Full replacement of FO significantly reduced the levels of PCDD/F and DLPCB in the fillet of 4 kg salmon by 70% and 79% respectively for 100AP + VO1 and 40% and 43% respectively for 100AP + VO2 fed fish. Fish gained an average of 3.7 kg across treatments (average final weight 4235.8 g ± 191.8); almost an 8-fold increase for all treatments. No significant differences were found among diets for performance, feed intake, gut health, histology, welfare, pigmentation, or fillet quality. This study demonstrates that AlgaPrime can be used to fully replace FO in Atlantic salmon grower feed without negative effects, achieving an important impact on food safety and sustainability for aquafeed producers and salmon consumers.

High quality diet attenuated the positive association between polychlorinated biphenyls and premature mortality among middle-aged and older adults

ObjectivePolychlorinated biphenyls (PCBs) have been reported to be a risk factor for premature death, while a high diet quality is thought to lower mortality risk. We aimed to examine whether PCBs were associated with higher all-cause and cause-specific mortality risk and whether such associations could be modified by the diet quality among US middle-aged and older adults. MethodsIncluded were 1259 participants aged 40 years or older from the 1999–2004 National Health and Nutrition Examination surveys. Exposure to PCBs was assessed in non-fasting serum samples, and mortality status was ascertained through December 31, 2019 using the public-use, linked mortality files. Diet quality was assessed using the Healthy Eating Index-2015 based on 24-h dietary recalls. Cox proportional hazard regression was applied to assess the associations of different PCB congener groups with mortality and the modifying effect by the diet quality. ResultsDuring a median follow-up of 17.75 years, 419 deaths occurred, including 131 from cardiovascular disease (CVD) and 102 from cancer. Serum concentrations of dioxin-like PCBs and non-dioxin-like PCBs were significantly associated with all-cause mortality, with hazard ratios (HRs) of 1.84 (95% confidence interval [CI], 1.10, 2.99) and 1.82 (1.09, 3.03) for extreme-tertile comparisons. A significant interaction was noted between dioxin-like PCBs and diet quality (P for interaction: 0.012), with a substantially more pronounced association among participants with a low diet quality (HR, 3.47; 95% CI: 1.29, 9.32), compared to those with a high diet quality (HR, 0.98; 95% CI: 0.40, 2.43). A similar weaker association was observed for total PCBs in participants with a high diet quality (P for interaction: 0.032). However, effect modifications by diet quality were not noted for the associations between different PCB groups and CVD mortality. ConclusionsWhile our findings need to be validated in other populations and mechanistic studies, they may suggest that a high quality diet could potentially attenuate the harmful effects of chronic PCB exposure.

Safety Evaluation and Probabilistic Health Risk Assessment of Cow Milk Produced in Northern Italy According to Dioxins and PCBs Contamination Levels.

Contamination levels of dioxins and polychlorinated biphenyls (PCBs) were monitored over 2018-2021 in 214 bovine milk samples from farms located in two regions in northern Italy (Lombardy and Emilia-Romagna). The average concentrations of the sum of dioxins and dioxin-like PCBs (0.78 ± 0.55 pg TEQ/g fat) and six non-dioxin-like PCBs (6.55 ± 2.24 ng/g fat) were largely below the maximum, and action limits established at European level, confirming a decreasing trend observed both locally and across Europe in recent years. The impact of contamination levels on chronic dietary exposure of the Italian population to dioxins and PCBs was found to be highly variable based on the type of cow milk (skimmed, semi-skimmed, or whole-fat milk) and the population age group considered. Indeed, a first-tier screening of the potential exposure via determinist methods allowed for the identification of the youngest population as the group with the worst risk profile. The refinement of exposure assessment via Monte Carlo probabilistic methods suggested that, at the less pessimistic middle-bound simulation scenario, infants, toddlers, and children consuming whole cow milk may be exposed to dioxins and PCBs levels above the toxicological reference values with a probability of 76, 56, and 22%, respectively.

Exposure and Risk Assessment to Airborne dl-PCBs and Dioxins in the Population Living in the Neighborhood of a Cement Plant: A Pilot Study in the Valencian Region of Spain.

Emissions from cement manufacturing facilities may increase health risks in nearby populations. For this reason, dioxin-like PCB (dl-PCB), polychlorinated dibenzo-p-dioxin (PCDD), and polychlorinated dibenzofuran (PCDF) concentrations in PM10 samples were assessed in the vicinity of a cement manufacturing plant located in the Valencian Region (eastern Spain). The total concentrations of the sum of dl-PCBs, PCDDs, and PCDFs ranged between 1.85 and 42.53 fg TEQ/m3 at the assessed stations. The average daily inhalation dose (DID) for the sum in adults ranged from 8.93 · 10-4 to 3.75 · 10-3 pg WHO TEQ kg-1 b.w. d-1, and, for children, the DID ranged from 2.01 · 10-3 to 8.44 · 10-3 pg WHO TEQ kg-1 b.w. d-1. Risk assessment for adults and children was performed using both daily and chronic exposure. The hazard quotient (HQ) was calculated considering 0.025 pg WHO TEQ kg-1 b.w. d-1 to be the acceptable maximum permitted inhalation exposure. The HQ obtained was slightly higher than 1 for PCDD/Fs at one of the stations (Chiva), indicating a possible health risk for the population under study due to inhalation exposure. In the case of chronic exposure, cancer risk (>10-6) was observed for some samples in one of the assessed sampling sites (Chiva).

Particle and gas phase sampling of PCDD/Fs and dl-PCBs by activated carbon fiber and GC/MS analysis

Polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), and polychlorobiphenyls (PCBs) are semi-volatile compounds and can be partitioned in the atmosphere between the gas and particulate phase, due to their physicochemical properties. For this reason, the reference standard methods for air sampling include a quartz fiber filter (QFF) for the particulate and a polyurethane foam (PUF) cartridge for the vapor phase, and it is the classical and most popular sampling method in the air. Despite the presence of the two adsorbing media, this method cannot be used for the study of the gas-particulate distribution, but only for a total quantification. This study presents the results and the performance aim to validate an activated carbon fiber (ACF) filter for the sampling of PCDD/Fs and dioxin-like PCBs (dl-PCBs) using laboratory and field tests. The specificity, precision, and accuracy of the ACF in relation to the QFF + PUF were evaluated through the isotopic dilution technique, the recovery rates, and the standard deviations. Then the ACF performance was assessed on real samples, in a naturally contaminated area, through parallel sampling with the reference method (QFF + PUF). The QA/QC was defined according to the standard methods ISO 16000–13 and -14 and EPA TO4A and 9A. Data confirmed that ACF meets the requirements for the quantification of native POPs compounds in atmospheric and indoor samples. In addition, ACF provided accuracy and precision comparable to those offered by standard reference methods using QFF + PUF, but with significant savings in terms of time and costs.

Spatial characteristics, sources and exposure risk of polychlorinated biphenyls in dusts and soils from an urban environment in the Niger Delta of Nigeria

Chlorinated organic compounds, such as polychlorinated biphenyls (PCBs), are a threat to both humans and the environment because of their toxicity, persistence, and capacity for long-range atmospheric transport. The concentrations of 28 PCB congeners, including 12 dioxin-like and seven indicator PCBs, were investigated in soils, and indoor and outdoor dusts from Port Harcourt city, Nigeria, in order to evaluate the characteristic distribution patterns in these media, their sources, and possible risk. The PCB concentrations varied from 4.59 to 116 ng g−1 for soils, and from 1.80 to 23.0 ng g−1 and 2.73 to 57.4 ng g−1 for indoor and outdoor dusts respectively. The sequence of PCB concentrations in these matrices was soil > outdoor dust > indoor dust. The composition of PCBs in these matrices indicated the prevalence of lower chlorinated PCBs in indoor and outdoor dusts, while the higher chlorinated congeners were dominant in soils. Di-PCBs were the predominant homologues in indoor dusts, while deca-PCBs were the most prevalent homologues in outdoor dusts and soils. The TEQ values of dioxin-like PCBs in 60 % of the soils, 100 % of the indoor dust, and 30 % of the outdoor dust were above the indicative value of 4 pg TEQ g−1 established by the Canadian authority. The hazard index (HI) values for exposure of adults and children to PCBs in these media were mostly greater than one, while the total cancer risk (TCR) values exceeded the acceptable risk value of 10−6, which indicate probable non-carcinogenic and carcinogenic risks resulting from exposure to PCBs in these media. Source analysis for PCBs in these matrices shows that they originated from diverse sources.

Sampling of Atlantic salmon using the Norwegian Quality cut (NQC) vs. Whole fillet; differences in contaminant and nutrient contents

Risk- benefit assessments of seafood require high-quality food composition data. In accordance with EU regulations, Atlantic salmon (Salmo salar) has conventionally been sampled using the Norwegian Quality Cut (NQC), a sub-cut of the middle section of the fish, in Norwegian surveillance programs. By comparing the contents of nutrients and contaminants in 34 samples of farmed Atlantic salmon, we aimed to evaluate the representativeness of the NQC compared with the whole fillet. Of the 129 analytes evaluated, eight single analytes, in addition to 25 different fatty acids, showed significant differences between the cuts. Significant differences were evident for total fat, including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), and sum PCB-6, but not for the sum of dioxins and dioxin-like PCBs. We further suggest that the NQC may still be used in large-scale sampling of Atlantic salmon, and that the whole fillet would be preferable when analysing the content of nutrients.

Prenatal exposure to 209 PCBs in mother-infant pairs from two cities in China: Levels, congener profiles, and transplacental transfer

Prenatal exposure to polychlorinated biphenyls (PCBs) has been well researched, but studies covering all 209 congeners are limited. Recent literature suggests a shift in the dominant congeners and increasing levels of unintentionally-produced PCBs (UP-PCBs) in environmental samples in China. To investigate the exposure levels and profiles of PCBs in pregnant women and newborns, as well as the characteristics of transplacental transfer, we measured 209 PCBs in 80 pairs of maternal serum (MS) and cord serum (CS) from Hangzhou and Mianyang, China. The levels of ∑PCBs of participants in this study were lower than those in developed countries and followed the order of (ng/g lw): Hangzhou-MS (148) > Hangzhou-CS (107) > Mianyang-MS (63.8) > Mianyang-CS (57.9). UP-PCBs (mainly PCB-11) contributed around 50% of ∑PCBs in serum, which is consistent with the environmental samples. Environmental burden and dietary intake may account for the differences in the exposure levels, while the historical production and release may have impacted the homologue profiles. Prenatal exposure to PCB-126 was associated with increased birth weight (n = 80, adjusted β = 0.270, p = 0.030). The body burden of dioxin-like PCBs of newborns in Hangzhou was 82.4 pg TEQ/kg bw, suggesting certain health risks under WHO tolerable daily intake of 1–4 pg TEQ/kg bw. Log10 KOW was negatively correlated with log10-transformed transplacental transfer efficiency (R2 = 0.36, p < 0.001), serving its importance for PCBs’ transplacental transfer. This study is the first to investigate maternal and fetal exposure to PCBs in China based on their levels, congener and homologue profiles, and potential adverse effects. Our findings help to provide insights into the processes and factors influencing the transplacental transfer of PCBs.

First insight into accumulation of characteristics and tissue distribution of PCBs, PBDEs, and other BFRs in the living Indonesian coelacanth (Latimeria menadoensis).

Persistent organic pollutants, including polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and other brominated flame retardants, were detected in the liver, muscle, and ovary tissues of the Indonesian coelacanth (Latimeria menadoensis) incidentally caught around Gangga Island, North Sulawesi Province, Indonesia, on November 5, 2014. Concentrations of total PCBs (209 congeners, 300-2600ngg-1 lipid weight) in all tissues showed higher than those of PBDEs (41 congeners, 3.9-6.3ngg-1 lw) and BTBPE (1.1-3.6ngg-1 lw). The tissue-specific PCB and PBDE profiles were likely due to differences in the lipid composition. Toxic equivalent (TEQ) values of dioxin-like PCBs in coelacanth tissues were lower than the benchmark values for early-life fish. However, compared with the data reported for deep-sea fishes in the Pacific and Indian Oceans, the relatively high concentrations of PCBs detected in this study raise concerns regarding Indonesian coelacanth conservation and habitat conditions.

Distribution of PCDD/F and PCB at Different Positions of Circulating Fluidized Bed Municipal Solid Waste Incinerators

Because of a high moisture content and a low heating value of Chinese municipal solid waste (MSW), circulating fluidized bed (CFB) incinerators have been widely adopted in China for incinerating MSW since 1998. In this study, two typical CFB incineration plants (A and B) were investigated for contents and fingerprints of PCDD/F and PCB at different positions downstream their post-combustion zone, aiming to draw a full picture of formation and distribution of these organochlorinated pollutants. Both flue gas and ashes were sampled at five different positions of Plant A, from high-temperature superheater to outlet of baghouse filter, representing a huge range of flue gas temperatures; for Plant B, five ash samples were collected at different positions of the waste heat boiler (from high-temperature superheater to lower economizer). A continuous increase in contents of PCDD/F and PCB in flue gas was observed from superheater to inlet of air pollution control system (APCS) in Plant A, with the most significant rise noticed at air preheater. The load of PCDD/F and dioxin-like PCB in ashes also amplified steadily along the cooling path of flue gas in both plants. Changes in formation pathways are discussed based on homologue and isomer distribution patterns.

Myco- and phyco-remediation of polychlorinated biphenyls in the environment: a review.

Polychlorinated biphenyls (PCBs) are toxic organic compounds and pose serious threats to environment and public health. PCBs still exist in different environments such as air, water, soil, and sediments even on ban. This review summarizes the phyco- and myco-remediation technologies developed to detoxify the PCB-polluted sites. It was found that algae mostly use bioaccumulation to biodegradation strategies to reclaim the environment. As bio-accumulator, Ulva rigida C. Agardh has been best at 25ng/g dry wt to remove PCBs. Evidently, Anabaena PD-1 is the only known PCB degrading alga and efficiently degrade Aroclor 1254 and dioxin-like PCBs up to 84.4% and 37.4% to 68.4%, respectively. The review suggested that factors such as choice of algal strains, response of microalgae, biomass, the rate of growth, and cost-effective cultivation conditions significantly influence the remediation of PCBs. Furthermore, the Anabaena sp. linA gene of Pseudomonas paucimobilis Holmes UT26 showed enhanced efficiency. Pleurotus ostreatus (Jacq.) P. Kumm is the most efficient PCB degrading fungus, degrading up to 98.4% and 99.6% of PCB in complex and mineral media, respectively. Combine metabolic activities of bacteria and yeast led to the higher detoxification of PCBs. Fungi-algae consortia would be a promising approach in remediation of PCBs. A critical analysis on potentials and limits of PCB treatment through fungal and algal biosystems have been reviewed, and thus, new insights have emerged for possible bioremediation, bioaccumulation, and biodegradation of PCBs.

A Snapshot on the Occurrence and Risk Assessment of Organic Pollutants in an Urban River

A snapshot screening was carried out in an urban river at the end of a dry period in the water and sediments to assess the presence and environmental risk for the following CECs: paracetamol, ibuprofen, diclofenac, clofibric acid, carbamazepine, ofloxacin, caffeine, tonalide, galaxolide, and bisphenol-A. Concomitantly, the occurrence and environmental risk of sixteen PAHs congeners, six indicator PCBs, and twelve dioxin-like PCBs were evaluated in sediments. The most abundant and ubiquitous CECs were bisphenol A (BPA) and caffeine, and the total contents in the surface water varied between 90.95–212.18 and 3.17–167.38 ng·L−1, respectively. The concentrations found in lixiviates ranged from 134.94–772.85 (BPA) and 14.43–92.60 ng·L−1 (caffeine). Other CECs were detected in lower concentrations, and their presence varied between sampled sites. Values of total PAHs congeners in sediment varied between 10.39–52.91 ng·g−1 dw. The majority of the detected PAHs seem to have a pyrolitic origin with a small petrogenic contribution. Total PCBs’ concentrations ranged from 5.06 to 6.13 ng·g−1 dw. Despite the relatively low concentration of most of the detected compounds, the overall environmental risk, considering the screened compounds altogether, cannot be considered negligible. The obtained results are discussed in terms of other data available (though highly dispersed) in the literature. A four-color alert system is included to inform about the level of risk associated with the amount of each CEC, PAH, and PCB.

Effects of Polychlorinated Dibenzo-p-dioxins, Polychlorinated Dibenzofurans, and Dioxin-like PCBs on Teeth and Bones in Animals and Humans.

Bone metabolism is regulated by endocrine systems, so people exposed to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) may suffer adverse effects on bones and teeth. We reviewed previous publications in which effects of PCDD/Fs and dioxin-like polychlorinated biphenyls on the teeth and bones of animals and humans were found. The aim was to identify future research directions, particularly for epidemiological studies of populations exposed to PCDD/Fs in the environment. Exposure of fetuses to PCDD/Fs may affect odontogenesis, particularly enamel formation, but the effects of PCDD/Fs on bone genesis are limited to palatine bone. Exposure to PCDD/Fs in milk may affect both teeth and bones, but the effects on bones may be reversible. Exposure to high PCDD/F concentrations even during adulthood may adversely affect teeth. Exposure to PCDD/Fs may induce osteogenesis and improve bone properties because the disrupting effects of PCDD/Fs cause bone remodeling and vitamin D activation. More studies involving humans are required to investigate previously found associations between the PCDD/F concentrations humans are exposed to and biological markers for teeth and bones, including metabolites of vitamin D.

Engine oil from agricultural machinery as a source of PCDD/Fs and PCBs in free-range hens

Free-range hens spend most of their lives outdoors, resulting in their heavy exposure to environmental pollutants such as polychlorinated dibenzo-p-dioxin, dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (DL-PCBs), and non-dioxin-like polychlorinated biphenyls (NDL-PCBs). We present a case of contamination of free-range eggs that is previously unreported in the literature. The aim of our study was a source investigation after finding a high level of PCDD/Fs in samples of eggs from one of the inspected farms. Samples of hens’ eggs, muscles, and livers and the feeds and soils were analyzed. The results showed that the soil samples taken from the paddock contained high concentrations of PCDD/Fs and DL-PCBs expressed as toxic equivalents (TEQ) (72.9 ± 18.2 pg WHO-TEQ g−1 dry mas (d.m.)) and a high concentration of NDL-PCBs (207 ± 46.9 ng g−1 d.m.). The investigation found that the cause of the soil contamination was oil leaking from the farm’s tractor engine. The oil contained very high concentrations of PCDD/F and DL-PCBs (1013 ± 253 pg WHO-TEQ g−1 oil) and 5644 ng g−1 of NDL-PCBs. The source of the contamination was confirmed by the similarity of the PCDD/F and PCB profiles in the hen eggs and the soil contaminated by engine oil. The dietary intake of toxins resulting from consumption of the eggs is provided. For children, the consumption of contaminated eggs would result in an intake of double the tolerable weekly intake (TWI), while for adults, it would be approx. 60–70% of TWI.

Combined exposure to multiple dioxins and dioxin-like polychlorinated biphenyls on hypertension among US adults in NHANES: a cross-sectional study under three statistical models.

Dioxins and dioxin-like polychlorinated biphenyls (DL-PCBs) are mainly released as by-products of human activities, often in the form of mixtures, and the potential harm on human health deserves attention. Therefore, our study aimed to analyze the combined effect of dioxins and DL-PCB exposures on hypertension (HTN) among US adults. Data of eligible participants were acquired from the National Health and Nutrition Examination Survey (NHANES). Multiple logistic regression models with adjustment for covariates were applied to explore the associations between 13 persistent organic pollutants (POPs) and HTN. Stratified analyses and interaction analyses were then conducted by age and gender. Finally, the combined effects of dioxins and DL-PCBs on HTN were assessed by the weighted quantile sum (WQS) model and the Bayesian kernel machine regression (BKMR) model. A total of 976 adults were included in our study, of whom 397 had HTN. Spearman correlations indicated positive correlations among 13 POPs. And most of them (except PCB28, PCB66, and 1,2,3,4,7,8,9-hpcdf) had significant effects on HTN. The result of WQS revealed that mixed exposure to dioxins and DL-PCBs was significantly associated with increased risk of HTN (OR: 2.205; 95% CIs: 1.555, 3.127). The BKMR model also presented a positive trend of HTN risk with exposure to multiple dioxins and DL-PCBs. And 1,2,3,4,6,7,8,9-ocdd may be the main factor for this positive association. Considering the limitations of our cross-sectional study with the small sample, further prospective studies are necessary to validate our findings.

Signature tracing of PCBs congeners in breastmilk of mothers living in selected urban centers of Pakistan

Polychlorinated biphenyls (PCBs) are banned toxic contaminants according to the Stockholm Convention of persistent pollutants (2001); however, they continue to be prevalent in the environment of Pakistan. The current study evaluates the risk to infants exposed to PCBs in breast milk from urban centers of Pakistan. The ∑14PCB concentrations ranged from ND to 118.36 ng/g lipid weight (l.w.) with a mean of 11.76. ± 4.88 ng/g l.w. These levels are greater than concentrations previously reported from Asia. The quantified PCB profile was also significantly (p < .05) related to the age of the mother while a negative correlation was observed with diet pattern (−0.26), fat content (−0.63), number of children (−0.185), and lactation (−0.19). There were significant differences among test locations with greater bioaccumulation observed in breast milk collected from urbanized Rawalpindi compared to less urbanized Jhang. The calculated estimated daily intakes of dioxin-like PCBs for infants were considerably higher than the recommended daily intake suggested by different organizations. The calculated hazard ratio (HR > 1) indicates health risks to infants in selected study regions.

Polychlorinated biphenyls (PCB) and polychlorinated dibenzo-para-dioxins and dibenzofurans (PCDD/F) in ambient air and deposition in the German background

PCDD/Fs (17 congeners and Σ tetra -to octachloro homologues) and 209 PCBs were investigated in monthly samples of ambient air (gas + particle phase) and atmospheric deposition at two background monitoring sites in Germany in 2018/19. In atmospheric deposition samples, PCDD/F congeners as well as certain PCBs were frequently below the method quantification limits whereas values for PCDD/F homologue groups could be quantified more often. Annual deposition averages for individual PCDD/Fs were between <0.1 μg/m2d and 6.7 μg/m2d. Averages for Σ TeCDD/F to OCDD/F homologue totals in deposition were about 11 pg/m2d and 19 pg/m2d. Total PCB deposition rates were about 1900 pg/m2d and 1550 pg/m2d. PCDD/F + PCB-deposition rates were below 1 pg WHO2005-TEQ/m2d on average. In ambient air, both substance groups were frequently observed. Annual concentration averages for individual PCDD/F were between 0.1 fg/m³ and 50 fg/m³. Average values for Σ TeCDD/F to OCDD/F homologue totals in ambient air were 283 fg/m³ and 162 fg/m³. Total PCB concentrations were about 50 pg/m³ at both sites. PCDD/F + PCB-TEQ values were lower than 5 fg WHO2005-TEQ/m³ on average. Besides the frequently studied dioxin-like PCBs and six indicator PCBs, the analysis of the 209 PCBs (166 separated PCB-peaks) enabled the identification and evaluation of additional PCBs that might be of environmental concern. Of 166 PCBs or PCB-coelutions, up to 144 were quantified in air samples and up to 94 in atmospheric deposition samples. In ambient air, some of these PCBs were observed at levels similar to or exceeding those of the six indicator PCBs. Important additional PCBs in ambient air were PCB 5 + 8, PCB 11, PCB 17, PCB 18, PCB 20 + 33, PCB 31, PCB 43 + 49, PCB 44, PCB 47 + 48 + 65 + 75, PCB 93 + 95 + 98 + 102, PCB 139 + 149, and PCB 151. The presence of these PCBs in atmospheric samples implies that by analysing only selected PCBs potentially important contaminants are overlooked.