Digested Sewage Sludge Research Articles

Quantitative and Qualitative Changes in the Genetic Diversity of Bacterial Communities in Anaerobic Bioreactors with the Diatomaceous Earth/Peat Cell Carrier.

This paper analyses the impact of the diatomaceous earth/peat (DEP; 3:1) microbial carrier on changes in the bacterial microbiome and the development of biofilm in the anaerobic digestion (AD) of confectionery waste, combined with digested sewage sludge as inoculum. The physicochemical properties of the carrier material are presented, with particular focus on its morphological and dispersion characteristics, as well as adsorption and thermal properties. In this respect, the DEP system was found to be a suitable carrier for both mesophilic and thermophilic AD. The evaluation of quantitative and qualitative changes in the genetic diversity of bacterial communities, carried out using next-generation sequencing (NGS), showed that the material has a modifying effect on the bacterial microbiome. While Actinobacteria was the most abundant cluster in the WF-control sample (WF—waste wafers), Firmicutes was the dominant cluster in the digested samples without the carrier (WF-dig.; dig.—digested) and with the carrier (WF + DEP). The same was true for the count of Proteobacteria, which decreased twofold during biodegradation in favor of Synergistetes. The Syntrophomonas cluster was identified as the most abundant genus in the two samples, particularly in WF + DEP. This information was supplemented by observations of morphological features of microorganisms carried out using fluorescence microscopy. The biodegradation process itself had a significant impact on changes in the microbiome of samples taken from anaerobic bioreactors, reducing its biodiversity. As demonstrated by the results of this innovative method, namely the BioFlux microfluidic flow system, the decrease in the number of taxa in the digested samples and the addition of DEP contributed to the microbial adhesion in the microfluidic system and the formation of a stable biofilm.

Uncovering the effect of polyethyleneimine on methane production in anaerobic digestion of sewage sludge

The potential effect of polyethyleneimine as a flocculant on anaerobic digestion of sludge was investigated. Polyethyleneimine above 12 g/kg total suspended solids inhibited the entire anaerobic digestion process including solubilization, hydrolysis, acidification, and methanogenesis. The addition of 24 g/kg total suspended solids polyethyleneimine reduced methane production from 167 ± 5 L/kg volatile suspended solids in the control reactor (without polyethyleneimine) to 141 ± 5 L/kg volatile suspended solids. Polyethyleneimine bound to extracellular polymeric substances, thus enhancing sludge agglomeration and hindering the release of organics. Meanwhile, the reduction of cytochrome C impeded electron transport, consequently curbed direct interspecies electron transfer. The adsorption of carbon dioxide by amine groups also hampered methane conversion. This study elucidated the concept that polyethyleneimine reduces mass transfer in anaerobic digestion, providing new insights into the potential behavior of flocculants in sludge treatment.

Hydrothermal carbonization of digested sewage sludge: The fate of heavy metals, PAHs, PCBs, dioxins and pesticides

Hydrothermal carbonization (HTC) is emerging as a promising technology for the management of sewage sludge. The fate of phytosanitary products, Polycyclic aromatic hydrocarbons (PAHs) and PCBs (Polychlorinated biphenyls) after HTC, as well as the formation of dioxins and furans, is still unclear. Moreover, only little information is available on the distribution of heavy metals and major nutrients between the hydrochars and the process water. Here, we aim to contribute to fill these gaps. HTC of sewage sludge from six different wastewater treatment plants has been carried out at 220 °C for 85 min. Feedstock, hydrochars and spent liquor have been then characterized and discussed.HTC is here proven to be a suitable technology for the immobilization of both heavy hydrocarbons and heavy metals, with the exception arsenic, which was also found in the spent liquor at a significant proportion (∼15–∼50%). DDD, DDT, DDE were detected in all sludge samples and their content was reduced by nearly one order of magnitude after the process. HTC is here proven to not be responsible at an appreciable extent of PCBs enrichment of the processed solids. Moreover, the sum of PCDDs and PCDFs in hydrochars never exceeded 20 ng kg−1 s.s.The results obtained encourage further developing of HTC, with the aim to improve the sustainability of sewage sludge management. Additional studies on the environmental impact of hydrochar when used as alternative fuel, as well as soil amendment, could lead to the overcoming of the issues which still hinder these applications.

Impact of High-Intensity Static Magnetic Field on Chemical Properties and Anaerobic Digestion of Sewage Sludge

The increasing production of sewage sludge at global level has addressed the search for technical solutions to take advantage from it, reducing the environmental burden originating from its disposal. Anaerobic digestion is a suitable option to handle sewage sludge in accordance with circular economy principles, as it generates a methane-rich biogas and a digestate with potential fertilizing properties. Several techniques have been proposed to enhance anaerobic digestion performances and, among these, the application of static magnetic field (SMF) has recently gained attention. Nonetheless, the effects of high-intensity SMF on the sewage sludge destined to anaerobic digestion and its impact on the anaerobic digestion process have not been evaluated yet. This study aims to determine the effects of a 1.5 T SMF on the chemical composition of sewage sludge as well as on methane generation during anaerobic digestion. The main parameters influencing the SMF (i.e., flow rate, mixing ratio of magnetized to non-magnetized sludge, number of pumping cycles, and total solid content) were varied to evaluate the impact of different exposure conditions on the chemical characteristics and methane potential of sewage sludge. An extensive exposure to the high-intensity SMF applied resulted in a 24% decrease of methane production, reduced the concentration of the monitored ionic species (i.e., NH4+, NO3−, PO43−, SO42− and Mg2+) in the liquid phase of sewage sludge, and promoted the precipitation of compounds with valuable fertilizing properties, e.g., struvite. These outcomes suggest that high-intensity SMF, although negatively influencing methane generation, can promote the precipitation, and possibly the recovery/recycle of valuable compounds from sewage sludge, enhancing its proper management in a circular economy perspective.Graphical abstract

Selection, composition, and validation of standard inoculum for anaerobic digestion assays

The inoculum is the initial source of microorganisms for the anaerobic digestion (AD). An active inoculum aids the success of organic matter degradation experiments. Enrichment and acclimation strategies have been studied in search of more efficient tests. The present study aimed to compose an active anaerobic mesophilic inoculum in the laboratory for test standardization. For this purpose, inoculums from different sources available in the study region, such as digested cattle manure (DCM), digested sewage sludge (DSS), digested food waste (DFW), digested swine manure (DSM), fresh cattle manure (FCM), cattle rumen (CR) and some compositions between them were tested in Biochemical methane potential (BMP) assays with microcrystalline cellulose as reference substrate, in addition to fruit and vegetable waste (FVW). The inoculums originated from anaerobic processes showed a greater aptitude for the AD process, being the mixture of DFW, DSM and DCM (Mix 4) presented an abundance of the genus of bacteria DMER64 and Archaeas Methanosaeta, greater production of biogas for the reference substrate, and greater production of biogas and methane for FVW. The aptitude control tests demonstrated that the maintenance of the laboratory reactor with Mix 4 inoculum was efficient. It was evident that the characteristics of inoculum can vary from one collection to another, which validates the fact that the maintenance of an active anaerobic mesophilic inoculum in the laboratory is essential for carrying out AD experiments with standardized and reliable results.

Comparative anaerobic digestion of sewage sludge at different temperatures with and without heat pre-treatment

Anaerobic digestion of sewage sludge is generally conducted under mesophilic (around 35 °C) or thermophilic (around 55 °C) conditions, whereas it is conducted at lower temperatures in some wastewater treatment plants without heating. In this study, we compared the anaerobic digestion of sewage sludge at 15, 25, 30, 35, 45, and 55 °C following hyperthermophilic pre-treatment at 80 °C for 24 h. Laboratory-scale reactors were operated continuously for more than 1000 days, and batch experiments were performed to evaluate the reaction kinetics. Biogas production rates at 15 °C with and without pre-treatment divided by that at 35 °C without pre-treatment were 0.73 and 0.78, respectively. The dewaterability of the digested sludge was evaluated by the capillary suction time (CST). The CST was approximately 50 s at 15 °C with and without pre-treatment and was slower than the CST at 35 °C. Compared to the shear rate, viscosity was higher at lower temperatures; however, it decreased with pre-treatment, which reduced the energy required for mixing in the reactors. Pre-treatment eliminated Escherichia coli from the sludge; however, E. coli (approximately 105 colony forming unit/g-total solids) was detected after digestion at temperatures ≤30 °C. Pre-treatment was also useful to replace a part of heat treatment required for digested sludge before it was used as fertilizer. Gene sequencing analyses indicated the effects of pre-treatment and digestion temperature on the microbial community in the digested sludge. Co-generation of biogas is useful to obtain both electricity and heat; however, heat from co-generation is sometimes limited. To maximize electricity recovery, the use of low temperature digesters has the potential to reduce fuel costs. The results indicate that anaerobic digestion at low temperatures with or without heat pre-treatment can be an efficient and cost-effective method of treating sewage sludge.

Effect of different concentrations of sodium selenite on anaerobic digestion of waste sewage sludge

The effect of sodium selenite on anaerobic digestion of waste sewage sludge (WSS) was studied. Interestingly, methane production was enhanced at 2 mg/L and inhibited at 100 mg/L of sodium selenite during the anaerobic digestion of WSS. Hydrolytic activity increased in correlation with increased concentrations of sodium selenite (0 to 100 mg/L). At the acidogenesis stage, acetic acid accumulated at the concentrations more than 25 mg/L of sodium selenite whereas it was consumed for 10 days at the concentration of 2 mg/L of sodium selenite. Also, the concentration of propionic acid decreased and that of butyric acid increased at 100 mg/L of sodium selenite. Although methanogenic activities were totally inhibited at 100 mg/L of sodium selenite, a high hydrogenotrophic methanogenic activity was observed at 2 mg/L of sodium selenite. The abundance of hydrogenotrophic methanogens ( Methanospirillum and Methanocorpusculum ) increased in the WSS at 2 mg/L of sodium selenite. Moreover, the results of pure-culture experiments using Methanosarcina acetivorans C2A show that the growth promotion or inhibition was observed at 2 mg/L or at 100 mg/L of sodium selenite. In conclusion, sodium selenite has the double-sided effect during the anaerobic digestion of WSS as shown by the results that methane production was promoted at a low concentration and inhibited at a high concentration. • Sodium selenite affects methane production through the anaerobic digestion of sewage sludge. • Methanogenic activities were totally inhibited at 100 mg/L of sodium selenite. • Sodium selenite at 2 mg/L enhanced the activity of hydrogenotrophic methanogenesis. • The growth of Methanosarcina acetivorans C2A was promoted at 2 mg/L and inhibited at 100 mg/L of sodium selenite.

Phosphorus release from hydrothermally carbonized digested sewage sludge using organic acids

Hydrothermal carbonization (HTC) is a treatment technique with great potential for sanitizing digested sewage sludge (SS) and converting it into valuable products. In particular, phosphorus (P) recovery from hydrothermally carbonized SS has attracted special attention in recent years. This work aims to examine the leaching efficiency of P and the consequent release of metals and heavy metals from SS hydrochars (at 180, 215 and 250 °C) using organic acids (oxalate and citrate) over a range of pH values (0–4) and extraction times (5 min-24 h). Both organic acids triggered P extraction efficiencies exceeding 75 % at the lowest pH, but only oxalate reached a nearly complete P release from hydrochars at pH > 0 and for all carbonization temperatures. Low HTC temperature (180 °C) and short extraction time (5 min) were the optimal conditions treatment for P recovery when reacted in oxalate solutions of maximal pH buffering capacity (pH = 1.4). However, oxalate leaching also transferred metals/heavy metals into the P-leachate, with the exception of Ca being retained in the solid residue from HTC as Ca-oxalate precipitate. Different characterization methods confirmed the presence of this precipitate, and provided information about the surface and morphological changes of the SS hydrochars following acid treatment. The results suggest that HTC not only a promising technique to sanitize and reduce the volume of SS, but also an efficient means for P recovery using oxalic acid, thus contributing to the circular economy of P.

Enzymatic integrated in-situ advanced anaerobic digestion of sewage sludge for the removal of antibiotics and antibiotic resistance genes

Antibiotics and antibiotic resistance genes (ARGs) in sewage sludge can cause high ecotoxicological risks in the environment and public health concerns. The aims of this study were to establish enzymatic integrated in-situ advanced anaerobic digestion (AAD) by adding cellulase and papain as well as the two enzymes combined with zero valent iron (ZVI) directly into the anaerobic digesters to explore the removal of antibiotics and ARGs under the mesophilic condition (35 °C). The methane production potential during in-situ AAD was effectively improved. Papain and cellulase at 30 mg/gTSS were most effective in improving antibiotic removal. The removal of sulfamerazine (SMZ) and sulfadiazine (SMR) could reach 89.10 % and 71.75 %. Combined enzymes with ZVI also enhanced the removal of all target antibiotics, especially roxithromycin (ROX), SMZ and SMR most significantly. Except for sul1, tetA and tetB, the removal of ARGs by papain reached 6.33 %-82.15 %. The addition of cellulase effectively improved tetA removal. The combination of biological enzymes further enhanced the removal of qnrS and ermX. The tetG, tetB, sul3, ermX, ermT, qnrS, and aac(6′)-IB-CR by combined enzymes with ZVI could even not be detected after digestion. Addition of papain, cellulase, and ZVI caused variations in the dominant bacteria. All target antibiotics presented significant positive correlations with the genera norank_f__Bacteroidetes_vadinHA17, norank_f__norank_o__SJA-15, norank_f__norank_o__Aminicenantales. Redundancy analysis showed archaea Methanosaeta and Candidatus_ Methanoacidiosum genera greatly contributed to antibiotics removal with the combination of enzymes and ZVI. Co-occurrence network analysis indicated the removal of ARGs was mainly based on the changes of existence of host bacteria.

Anaerobic digestion of sewage sludge for biogas & biohydrogen production: State-of-the-art trends and prospects

Advancement in the anaerobic digestion of sewage sludge for biogas production is constantly required for effective commercialization. There is great interest in exploring the scientometric and technical assessment in biogas production using sewage sludge from various sources in the anaerobic digestion process. Therefore, this work provides a bibliometric and technical study of anaerobic digestion for biogas production from sewage sludge in the last ten years, based on Web of Science data. The vital parameters of the bibliometric study are authors, countries, and institutional collaboration along with the authors' keywords. In terms of technical assessment, challenges are highlighted with critical analysis of previous work performed both on a laboratory scale and on a pilot scale. The study recommends key considerations and new combination techniques to enhance biohydrogen production with optimized process conditions which will provide vital economic impact for technological adaptation and commercialization.

Reduction of microplastics in sewage sludge by vermicomposting

Sewage sludge application in agricultural soils represents a salient route for microplastics (MPs) to enter the environment. The aim of this study was to assess the bioremediation of dewatered anaerobically digested sewage sludge (D-AD-SS) contaminated with MPs through vermicomposting using Eudrilus eugeniae earthworm. The specific objectives were to determine the effects of polypropylene (PP) and high-density polyethylene (HDPE) MPs of sizes 1650–2000 µm and 146–500 µm on the physical activities of the earthworms and the chemical properties of the vermicomposting process. Results showed that the presence of MPs had no influence on the percentage mortality of the earthworms compared to the blank. The abundance of PP (146–500 µm), HDPE (146–500 µm), HDPE (1650–2000 µm) and PP (1650–2000 µm) decreased significantly by 78 %, 56 %, 31 % and 22 % respectively after 14 weeks of vermicomposting. The FTIR spectra for 146–500 µm showed a reduction in the absorbance band for alkane group by 11 % for PP and 34 % for HDPE, indicating possible biodegradation. Moreover, the presence of MPs had no effect on chemical properties during vermicomposting process in terms of pH, electrical conductivity and C:N ratio. Interestingly, the presence of MPs reduced the cadmium content in the vermicompost compared with the blank. Furthermore, the cluster analysis showed that significant differences existed between PP-MPs (1650–2000 µm) and the other MPs with respect to the overall impact on vermicomposting process. This study demonstrates that sewage sludge, contaminated with MPs of different types and size ranges, may safely be reused and applied to agricultural soils, once it has been bio-remediated through vermicomposting.

Energy Potential of Biogas from Sewage Sludge after Thermal Hydrolysis and Digestion

This paper presents the energy potential of biogas obtained from the anaerobic digestion (AD) of sewage sludge (SS) preceded by thermal hydrolysis (THP) using Cambi THP® technology. The presented data are for the Tarnów (Poland) wastewater treatment plant for the year 2020. A detailed energy balance of biogas and its use in the cogeneration process and in the production of heat in the water boiler and the steam boiler is presented. The article contains data on the amount of processed SS and the content of dry matter and dry organic matter at different stages of the technological process. The annual plant operation resulted in the production of 3,276,497 Nm3 of biogas as a result of processing 8684 tonnes of dry solids (tDS) of municipal SS from the Tarnów wastewater treatment plant (WWTP) and regional WWTPs. The energy potential of the produced biogas was 75,347.06 GJ. The average calorific value of biogas was 23,021 kJ/Nm3.. The obtained biogas production allowed us to cover the thermal energy demand of the THP 100%. The annual average specific biogas conversion rate during the study period was 0.761 Nm3/kg of dry organic matter reduced and the average organic matter content reduction in the sludge was 64.60%.

Anoxic desulphurisation of biogas from full-scale anaerobic digesters in suspended biomass bioreactors valorising previously nitrified digestate centrate

Nitrification of centrate from anaerobic sewage sludge digestion presents a major opportunity as an electron acceptor in anoxic biogas biodesulphurisation. Nitritation and nitrification inhibition by free ammonia was detected at laboratory scale, but was avoided during the scale-up operation in a 4 m3 reactor treating ammonium loads up to 19 gN m−3 h−1. This nitrate-rich stream was fed to two pilot-scale suspended biomass bioreactors (SBBs) treating real biogas for 220 days. After an adaptation period of 21 days, nitrate and alkalinity concentrations in the liquid medium below 10 mgN L−1 and 100 mgCaCO3 L−1 were found to limit hydrogen sulphide (H2S) oxidation. Once controlled, 95% of the H2S was removed in SBB1 and 90% in SBB2, at a gas residence time (GRT) of 5.9 min, treating average values of 321 ± 205 ppmv and 457 ± 205 ppmv, respectively. Outlet H2S concentrations of 16 ± 24 ppmv in SBB1 and 46 ± 39 ppmv in SBB2 were obtained, which are below the requirements of biogas combustion heat and power engines. Unlike H2S, siloxanes were not removed with these GRTs. The results demonstrate the feasibility of the combined process for H2S treatment, potential valorisation of precipitated elemental sulphur and a reduction in the reagents currently used to control H2S.

Performance evaluation of a novel upflow anaerobic sludge blanket reactor with built-in downflow hanging sponge module for the treatment of municipal sewage.

The present study investigates the potential of a novel upflow anaerobic sludge blanket (UASB) reactor with a built-in polishing facility for the treatment of municipal sewage. A laboratory-scale reactor, which combined an inner-centric hybrid UASB module and an outer concentric downflow hanging sponge (DHS) unit, was designed and fabricated as a part of this research work. The reactor had been continuously operated for 210 days under ambient conditions. With anaerobically digested sewage sludge (seed sludge blended with Locust bean gum polymer) as inoculum, the reactor attained a successful startup in 40 days. Ensuring startup, the reactor was employed under varying organic loading rates (OLR) from 0.87 to 5.09 kg COD/m3/d, with corresponding hydraulic retention times (HRT) of 24-4 h. The novel UASB reactor made its mark with a high COD and TSS removal of 93.2% and 93%, respectively, under the optimum conditions of 6-h HRT. In addition, biogas rich in methane content (68%), with a maximum specific yield of 0.42± 0.02 m3 biogas /kg COD destroyed, was generated. The VSS/TSS ratio observed a steady rise (0.51 to 0.75) with increasing sludge age, bearing witness to the active growth of biomass. Hence, in brief, the novel UASB reactor can be coined as an energy economic system with improved effluent quality.

Principles and potential of thermal hydrolysis of sewage sludge to enhance anaerobic digestion

Sewage sludge is rich source of carbon, nutrients, and trace elements and can be subjected to proper treatment before disposal to fulfill government legislation and protect receiving environments. Anaerobic digestion (AD) is a well-adopted technology for stabilizing sewage sludge and recovering energy-rich biogas and nutrient-rich digestate. However, a slow hydrolysis rate limits the biodegradability of sludge. In the present study we have attempted to explain the potential of thermal hydrolysis to enhance anaerobic digestion of sewage sludge. Thermal pretreatment improves biodegradability and recycling of the sludge as an excellent energy and nutrients recovery source at reasonable capital (CAPEX) and operational (OPEX) costs. Other pretreatments like conventional (below/above 100 °C), temperature-phased anaerobic digestion (TPAD), microwave and chemically mediated thermal pretreatment have also been accounted. This review provides a holistic overview of sludge's characterization and value-added properties, various techniques used for sludge pretreatment for resource recovery, emphasizing conventional and advanced thermal pretreatment, challenges in scale-up of these technologies, and successful commercialization of thermal pretreatment techniques.

Enhanced Phosphorus Recovery as Vivianite from Anaerobically Digested Sewage Sludge with Magnetic Biochar Addition

Sustainable phosphorus (P) recovery from sewage sludge is crucial to reconciling the simultaneous shortage and excess of P. In this study, magnetic biochar (MBC) was synthesized and innovatively applied to enhance P recovery as vivianite. The effects of anaerobic digestion (AD) time, hydrothermal (HT) pretreatment temperature and MBC dose on vivianite formation were investigated using batch experiments and a modified sequential P extraction protocol. The P fractionation results showed that the concentration of pure vivianite-bound P (Fe(II)-P) reached a maximum on the 10th day of AD treatment, and then declined sharply due to vivianite oxidation and P limitation. HT pretreatment operated at relatively high temperatures (135 and 185 °C) reduced vivianite formation; this negative effect of HT pretreatment was partially compensated by MBC supplementation. The proportion of Fe(II)-P in the solid phase of sludge was substantially raised up to 57.1% from 8.3~17.4% with an increasing dose of MBC from 0 to 12.5 g/L, indicating that MBC had a markedly enhanced effect on vivianite formation; this could be attributed to the MBC-improved Fe(II) production, as evidenced by the elevated proportion of Fe(II) in Fe2p XPS spectra and the increased ratio of Fe(II)-P to oxidized vivianite-bound P (Fe(III)-P) in the sludge after MBC supplementation. MBC addition also decreased the proportion of water-extractable P by sorption and promoted organic P decomposition, which further facilitated vivianite production. These findings reveal a new strategy for enhancing P recovery from HT-pretreated AD sludge.

Microbial community development during syngas methanation in a trickle bed reactor with various nutrient sources

Microbial community development within an anaerobic trickle bed reactor (TBR) during methanation of syngas (56% H2, 30% CO, 14% CO2) was investigated using three different nutrient media: defined nutrient medium (241 days), diluted digestate from a thermophilic co-digestion plant operating with food waste (200 days) and reject water from dewatered digested sewage sludge at a wastewater treatment plant (220 days). Different TBR operating periods showed slightly different performance that was not clearly linked to the nutrient medium, as all proved suitable for the methanation process. During operation, maximum syngas load was 5.33 L per L packed bed volume (pbv) & day and methane (CH4) production was 1.26 L CH4/Lpbv/d. Microbial community analysis with Illumina Miseq targeting 16S rDNA revealed high relative abundance (20–40%) of several potential syngas and acetate consumers within the genera Sporomusa, Spirochaetaceae, Rikenellaceae and Acetobacterium during the process. These were the dominant taxa except in a period with high flow rate of digestate from the food waste plant. The dominant methanogen in all periods was a member of the genus Methanobacterium, while Methanosarcina was also observed in the carrier community. As in reactor effluent, the dominant bacterial genus in the carrier was Sporomusa. These results show that syngas methanation in TBR can proceed well with different nutrient sources, including undefined medium of different origins. Moreover, the dominant syngas community remained the same over time even when non-sterilised digestates were used as nutrient medium.Key points•Independent of nutrient source, syngas methanation above 1 L/Lpbv/D was achieved.•Methanobacterium and Sporomusa were dominant genera throughout the process.•Acetate conversion proceeded via both methanogenesis and syntrophic acetate oxidation.Graphical abstract

Evaluation of the biodegradability of a heat-treated anaerobic inoculum

The citrus industry produces a considerable amount of solid and liquid waste, which are mostly wasted. Anaerobic digestion of sewage sludge is an attractive option as it can produce fuels in the form of methane gas. However, the presence of complex organic compounds and pathogenic microorganisms significantly hinders the effectiveness of this process. The objective of this work is the selection of a source of inoculum free of pathogenic microorganisms by means of a thermal pretreatment and in this way is conducive to the treatment of residual sludge from the Citrus industry. The inoculum was taken from a geomembrane reactor which uses cattle manure as a substrate. 6 biodegradability kinetics were performed, varying the substrate-inoculum ratio, three of them with inoculum without pretreatment and another three with treatment, all under mesophilic conditions. SV parameters, pH, and biogas production were determined.

Viscosity and Total Organic Carbon Removal in High-Solid Anaerobic Digestion of Sewage Sludge

Viscosity and Total Organic Carbon Removal in High-Solid Anaerobic Digestion of Sewage Sludge

Sludge Management at the Kraków-Płaszów WWTP—Case Study

Municipal wastewater treatment plants are good examples of facilities where the concept of a circular economy model can be effectively implemented by the recovery of energy as well as secondary and natural materials. That is why anaerobic co-digestion has become one of the most appealing renewable energy pathways and takes a key position within sludge-handling processes. This research looked into the feasibility of the utilization of water sludge from a water treatment plant in anaerobic co-digestion with sewage sludge. The experiments confirmed that anaerobic digestion of sewage sludge together with water sludge significantly improved fermentation gas (biogas) production. The best results were observed when water treatment sludge constituted 30% of the mass of sewage sludge (as volatile solids, VS). At this ratio, approximately 20% more biogas was produced in laboratory experiments compared to the biogas production from sewage sludge only. The results, once confirmed on a semi-technical scale, will help to develop a sequence of processes which would enhance biogas production. Both the technology and the final product offer a comprehensive solution for waste generated at water and wastewater treatment plants. The innovative approach allows for the use of various waste streams and their combined processing following the principle of the circular economy.